summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-11-20ipc: WARN if trying to remove ipc object which is absentAlexander Mikhalitsyn
Patch series "shm: shm_rmid_forced feature fixes". Some time ago I met kernel crash after CRIU restore procedure, fortunately, it was CRIU restore, so, I had dump files and could do restore many times and crash reproduced easily. After some investigation I've constructed the minimal reproducer. It was found that it's use-after-free and it happens only if sysctl kernel.shm_rmid_forced = 1. The key of the problem is that the exit_shm() function not handles shp's object destroy when task->sysvshm.shm_clist contains items from different IPC namespaces. In most cases this list will contain only items from one IPC namespace. How can this list contain object from different namespaces? The exit_shm() function is designed to clean up this list always when process leaves IPC namespace. But we made a mistake a long time ago and did not add a exit_shm() call into the setns() syscall procedures. The first idea was just to add this call to setns() syscall but it obviously changes semantics of setns() syscall and that's userspace-visible change. So, I gave up on this idea. The first real attempt to address the issue was just to omit forced destroy if we meet shp object not from current task IPC namespace [1]. But that was not the best idea because task->sysvshm.shm_clist was protected by rwsem which belongs to current task IPC namespace. It means that list corruption may occur. Second approach is just extend exit_shm() to properly handle shp's from different IPC namespaces [2]. This is really non-trivial thing, I've put a lot of effort into that but not believed that it's possible to make it fully safe, clean and clear. Thanks to the efforts of Manfred Spraul working an elegant solution was designed. Thanks a lot, Manfred! Eric also suggested the way to address the issue in ("[RFC][PATCH] shm: In shm_exit destroy all created and never attached segments") Eric's idea was to maintain a list of shm_clists one per IPC namespace, use lock-less lists. But there is some extra memory consumption-related concerns. An alternative solution which was suggested by me was implemented in ("shm: reset shm_clist on setns but omit forced shm destroy"). The idea is pretty simple, we add exit_shm() syscall to setns() but DO NOT destroy shm segments even if sysctl kernel.shm_rmid_forced = 1, we just clean up the task->sysvshm.shm_clist list. This chages semantics of setns() syscall a little bit but in comparision to the "naive" solution when we just add exit_shm() without any special exclusions this looks like a safer option. [1] https://lkml.org/lkml/2021/7/6/1108 [2] https://lkml.org/lkml/2021/7/14/736 This patch (of 2): Let's produce a warning if we trying to remove non-existing IPC object from IPC namespace kht/idr structures. This allows us to catch possible bugs when the ipc_rmid() function was called with inconsistent struct ipc_ids*, struct kern_ipc_perm* arguments. Link: https://lkml.kernel.org/r/20211027224348.611025-1-alexander.mikhalitsyn@virtuozzo.com Link: https://lkml.kernel.org/r/20211027224348.611025-2-alexander.mikhalitsyn@virtuozzo.com Co-developed-by: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Andrei Vagin <avagin@gmail.com> Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Cc: Vasily Averin <vvs@virtuozzo.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-20mm/swap.c:put_pages_list(): reinitialise the page listMatthew Wilcox
While free_unref_page_list() puts pages onto the CPU local LRU list, it does not remove them from the list they were passed in on. That makes the list_head appear to be non-empty, and would lead to various corruption problems if we didn't have an assertion that the list was empty. Reinitialise the list after calling free_unref_page_list() to avoid this problem. Link: https://lkml.kernel.org/r/YYp40A2lNrxaZji8@casper.infradead.org Fixes: 988c69f1bc23 ("mm: optimise put_pages_list()") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Steve French <stfrench@microsoft.com> Reported-by: Namjae Jeon <linkinjeon@kernel.org> Tested-by: Steve French <stfrench@microsoft.com> Tested-by: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Hyeoncheol Lee <hyc.lee@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-20ALSA: intel-dsp-config: add quirk for JSL devices based on ES8336 codecPierre-Louis Bossart
These devices are based on an I2C/I2S device, we need to force the use of the SOF driver otherwise the legacy HDaudio driver will be loaded - only HDMI will be supported. We previously added support for other Intel platforms but missed JasperLake. BugLink: https://github.com/thesofproject/linux/issues/3210 Fixes: 9d36ceab9415 ('ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on ES8336 codec') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20211027023254.24955-1-yung-chuan.liao@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-11-19Merge tag 'libata-5.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull libata fixes from Damien Le Moal: - Prevent accesses to unsupported log pages as that causes device scan failures with LLDDs using libsas (from me). - A couple of fixes for AMD AHCI adapters handling of low power modes and resume (from Mario). - Fix a compilation warning (from me). * tag 'libata-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libata-sata: Declare ata_ncq_sdev_attrs static ata: libahci: Adjust behavior when StorageD3Enable _DSD is set ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile ata: libata: add missing ata_identify_page_supported() calls ata: libata: improve ata_read_log_page() error message
2021-11-19Merge tag 'trace-v5.16-6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Fix double free in destroy_hist_field - Harden memset() of trace_iterator structure - Do not warn in trace printk check when test buffer fills up * tag 'trace-v5.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Don't use out-of-sync va_list in event printing tracing: Use memset_startat() to zero struct trace_iterator tracing/histogram: Fix UAF in destroy_hist_field()
2021-11-19selinux: fix NULL-pointer dereference when hashtab allocation failsOndrej Mosnacek
When the hash table slot array allocation fails in hashtab_init(), h->size is left initialized with a non-zero value, but the h->htable pointer is NULL. This may then cause a NULL pointer dereference, since the policydb code relies on the assumption that even after a failed hashtab_init(), hashtab_map() and hashtab_destroy() can be safely called on it. Yet, these detect an empty hashtab only by looking at the size. Fix this by making sure that hashtab_init() always leaves behind a valid empty hashtab when the allocation fails. Cc: stable@vger.kernel.org Fixes: 03414a49ad5f ("selinux: do not allocate hashtabs dynamically") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-11-19Merge tag 'perf-tools-fixes-for-v5.16-2021-11-19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix the 'local_weight', 'weight' (memory access latency), 'local_ins_lat', 'ins_lat' (instruction latency) and 'pstage_cyc' (pipeline stage cycles) sort key sample aggregation. - Fix 'perf test' entry for watchpoints on s/390. - Fix branch_stack entry endianness check in the 'perf test' sample parsing test. - Fix ARM SPE handling on 'perf inject'. - Fix memory leaks detected with ASan. - Fix build on arm64 related to reallocarray() availability. - Sync copies of kernel headers: cpufeatures, kvm, MIPS syscalltable (futex_waitv). * tag 'perf-tools-fixes-for-v5.16-2021-11-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf evsel: Fix memory leaks relating to unit perf report: Fix memory leaks around perf_tip() perf hist: Fix memory leak of a perf_hpp_fmt tools headers UAPI: Sync MIPS syscall table file changed by new futex_waitv syscall tools build: Fix removal of feature-sync-compare-and-swap feature detection perf inject: Fix ARM SPE handling perf bench: Fix two memory leaks detected with ASan perf test sample-parsing: Fix branch_stack entry endianness check tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources perf sort: Fix the 'p_stage_cyc' sort key behavior perf sort: Fix the 'ins_lat' sort key behavior perf sort: Fix the 'weight' sort key behavior perf tools: Set COMPAT_NEED_REALLOCARRAY for CONFIG_AUXTRACE=1 perf tests wp: Remove unused functions on s390 tools headers UAPI: Sync linux/kvm.h with the kernel sources tools headers cpufeatures: Sync with the kernel sources
2021-11-19Merge tag 'riscv-for-linus-5.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "I have two patches for 5.16: - allow external modules to be built against read-only source trees - turn KVM on in the defconfigs The second one isn't technically a fix, but it got tied up pending some defconfig cleanups that ended up finding some larger issues. I figured it'd be better to get the config changes some more testing, but didn't want to hold up turning KVM on for that" * tag 'riscv-for-linus-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: fix building external modules RISC-V: Enable KVM in RV64 and RV32 defconfigs as a module
2021-11-19Merge branch 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull exit-vs-signal handling fixes from Eric Biederman: "This is a small set of changes where debuggers were no longer able to intercept synchronous SIGTRAP and SIGSEGV, introduced by the exit cleanups. This is essentially the change you suggested with all of i's dotted and the t's crossed so that ptrace can intercept all of the cases it has been able to intercept the past, and all of the cases that made it to exit without giving ptrace a chance still don't give ptrace a chance" * 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal: Replace force_fatal_sig with force_exit_sig when in doubt signal: Don't always set SA_IMMUTABLE for forced signals
2021-11-19Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Six fixes, five in drivers (ufs, qla2xxx, iscsi) and one core change to fix a regression in user space device state setting, which is used by the iscsi daemons to effect device recovery" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix mailbox direction flags in qla2xxx_get_adapter_id() scsi: ufs: core: Fix another task management completion race scsi: ufs: core: Fix task management completion timeout race scsi: core: sysfs: Fix hang when device state is set via sysfs scsi: iscsi: Unblock session then wake up error handler scsi: ufs: core: Improve SCSI abort handling
2021-11-19Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "There are a few big regression items from the merge window suggesting that people are testing rc1's but not testing the for-next branches: - Warnings fixes - Crash in hf1 when creating QPs and setting counters - Some old mlx4 cards fail to probe due to missing counters - Syzkaller crash in the new counters code" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: MAINTAINERS: Update for VMware PVRDMA driver RDMA/nldev: Check stat attribute before accessing it RDMA/mlx4: Do not fail the registration on port stats IB/hfi1: Properly allocate rdma counter desc memory RDMA/core: Set send and receive CQ before forwarding to the driver RDMA/netlink: Add __maybe_unused to static inline in C file
2021-11-19Merge tag 'gpio-fixes-for-v5.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix a coccicheck warning in gpio-virtio - fix gpio selftests build issues - fix a Kconfig issue in gpio-rockchip * tag 'gpio-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: rockchip: needs GENERIC_IRQ_CHIP to fix build errors selftests: gpio: restore CFLAGS options selftests: gpio: fix uninitialised variable warning selftests: gpio: fix gpio compiling error gpio: virtio: remove unneeded semicolon
2021-11-19Merge tag 'drm-fixes-2021-11-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "This week's fixes, pretty quiet, about right for rc2. amdgpu is the bulk of them but the scheduler ones have been reported in a few places I think. Otherwise just some minor i915 fixes and a few other scattered around: scheduler: - two refcounting fixes cma-helper: - use correct free path for noncoherent efifb: - probing fix amdgpu: - Better debugging info for SMU msgs - Better error reporting when adding IP blocks - Fix UVD powergating regression on CZ - Clock reporting fix for navi1x - OLED panel backlight fix - Fix scaling on VGA/DVI for non-DC display code - Fix GLFCLK handling for RGP on some APUs - fix potential memory leak amdkfd: - GPU reset fix i915: - return error handling fix - ADL-P display fix - TGL DSI display clocks fix nouveau: - infoframe corruption fix sun4i: - Kconfig fix" * tag 'drm-fixes-2021-11-19' of git://anongit.freedesktop.org/drm/drm: drm/amd/amdgpu: fix potential memleak drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered again drm/amd/pm: add GFXCLK/SCLK clocks level print support for APUs drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors drm/amd/display: Fix OLED brightness control on eDP drm/amd/pm: Remove artificial freq level on Navi1x drm/amd/pm: avoid duplicate powergate/ungate setting drm/amdgpu: add error print when failing to add IP block(v2) drm/amd/pm: Enhanced reporting also for a stuck command drm/i915/guc: fix NULL vs IS_ERR() checking drm/i915/dsi/xelpd: Fix the bit mask for wakeup GB Revert "drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping" fbdev: Prevent probing generic drivers if a FB is already registered drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder drm/scheduler: fix drm_sched_job_add_implicit_dependencies drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHY drm/cma-helper: Release non-coherent memory with dma_free_noncoherent() drm/nouveau: hdmigv100.c: fix corrupted HDMI Vendor InfoFrame
2021-11-19x86: Pin task-stack in __get_wchan()Peter Zijlstra
When commit 5d1ceb3969b6 ("x86: Fix __get_wchan() for !STACKTRACE") moved from stacktrace to native unwind_*() usage, the try_get_task_stack() got lost, leading to use-after-free issues for dying tasks. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Fixes: 5d1ceb3969b6 ("x86: Fix __get_wchan() for !STACKTRACE") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215031 Link: https://lore.kernel.org/stable/YZV02RCRVHIa144u@fedora64.linuxtx.org/ Reported-by: Justin Forbes <jmforbes@linuxtx.org> Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-19signal: Replace force_fatal_sig with force_exit_sig when in doubtEric W. Biederman
Recently to prevent issues with SECCOMP_RET_KILL and similar signals being changed before they are delivered SA_IMMUTABLE was added. Unfortunately this broke debuggers[1][2] which reasonably expect to be able to trap synchronous SIGTRAP and SIGSEGV even when the target process is not configured to handle those signals. Add force_exit_sig and use it instead of force_fatal_sig where historically the code has directly called do_exit. This has the implementation benefits of going through the signal exit path (including generating core dumps) without the danger of allowing userspace to ignore or change these signals. This avoids userspace regressions as older kernels exited with do_exit which debuggers also can not intercept. In the future is should be possible to improve the quality of implementation of the kernel by changing some of these force_exit_sig calls to force_fatal_sig. That can be done where it matters on a case-by-case basis with careful analysis. Reported-by: Kyle Huey <me@kylehuey.com> Reported-by: kernel test robot <oliver.sang@intel.com> [1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com [2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020 Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed") Fixes: a3616a3c0272 ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die") Fixes: 83a1f27ad773 ("signal/powerpc: On swapcontext failure force SIGSEGV") Fixes: 9bc508cf0791 ("signal/s390: Use force_sigsegv in default_trap_handler") Fixes: 086ec444f866 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig") Fixes: c317d306d550 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails") Fixes: 695dd0d634df ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit") Fixes: 1fbd60df8a85 ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.") Fixes: 941edc5bf174 ("exit/syscall_user_dispatch: Send ordinary signals on failure") Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.org Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Kyle Huey <khuey@kylehuey.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-11-19signal: Don't always set SA_IMMUTABLE for forced signalsEric W. Biederman
Recently to prevent issues with SECCOMP_RET_KILL and similar signals being changed before they are delivered SA_IMMUTABLE was added. Unfortunately this broke debuggers[1][2] which reasonably expect to be able to trap synchronous SIGTRAP and SIGSEGV even when the target process is not configured to handle those signals. Update force_sig_to_task to support both the case when we can allow the debugger to intercept and possibly ignore the signal and the case when it is not safe to let userspace know about the signal until the process has exited. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Kyle Huey <me@kylehuey.com> Reported-by: kernel test robot <oliver.sang@intel.com> Cc: stable@vger.kernel.org [1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com [2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020 Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed") Link: https://lkml.kernel.org/r/877dd5qfw5.fsf_-_@email.froward.int.ebiederm.org Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Kyle Huey <khuey@kylehuey.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-11-19HID: multitouch: Fix Iiyama ProLite T1931SAW (0eef:0001 again!)Ondrej Zary
Iiyama ProLite T1931SAW does not work with Linux - input devices are created but cursor does not move. It has the infamous 0eef:0001 ID which has been reused for various devices before. It seems to require export_all_inputs = true. Hopefully there are no HID devices using this ID that will break. It should not break non-HID devices (handled by usbtouchscreen). Signed-off-by: Ondrej Zary <linux@zary.sk> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-11-19HID: nintendo: eliminate dead datastructures in !CONFIG_NINTENDO_FF caseJiri Kosina
The rumbling-related identifiers are never used in !CONFIG_NINTENDO_FF case, so let's hide them in order to avoid unused warnings. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-11-19HID: magicmouse: prevent division by 0 on scrollClaudia Pellegrino
In hid_magicmouse, if the user has set scroll_speed to a value between 55 and 63 and scrolls seven times in quick succession, the step_hr variable in the magicmouse_emit_touch function becomes 0. That causes a division by zero further down in the function when it does `step_x_hr /= step_hr`. To reproduce, create `/etc/modprobe.d/hid_magicmouse.conf` with the following content: ``` options hid_magicmouse scroll_acceleration=1 scroll_speed=55 ``` Then reboot, connect a Magic Mouse and scroll seven times quickly. The system will freeze for a minute, and after that `dmesg` will confirm that a division by zero occurred. Enforce a minimum of 1 for the variable so the high resolution step count can never reach 0 even at maximum scroll acceleration. Fixes: d4b9f10a0eb6 ("HID: magicmouse: enable high-resolution scroll") Signed-off-by: Claudia Pellegrino <linux@cpellegrino.de> Tested-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-11-19HID: thrustmaster: fix sparse warningsVihas Mak
Changed 0 to NULL to fix following sparse warnings: drivers/hid/hid-thrustmaster.c:208:43: warning: Using plain integer as NULL pointer drivers/hid/hid-thrustmaster.c:241:17: warning: Using plain integer as NULL pointer drivers/hid/hid-thrustmaster.c:275:37: warning: Using plain integer as NULL pointer Signed-off-by: Vihas Mak <makvihas@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-11-19HID: Ignore battery for Elan touchscreen on HP Envy X360 15-eu0xxxTrevor Davenport
Battery status is reported for the HP Envy X360 Convertible 15-eu0xxx even if it does not have a battery. Prevent it from always reporting the battery as low. Signed-off-by: Trevor Davenport <trevor.davenport@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-11-19HID: input: set usage type to key on keycode remapThomas Weißschuh
When a scancode is manually remapped that previously was not handled as key, then the old usage type was incorrectly reused. This caused issues on a "04b3:301b IBM Corp. SK-8815 Keyboard" which has marked some of its keys with an invalid HID usage. These invalid usage keys are being ignored since support for USB programmable buttons was added. The scancodes are however remapped explicitly by the systemd hwdb to the keycodes that are printed on the physical buttons. During this mapping step the existing usage is retrieved which will be found with a default type of 0 (EV_SYN) instead of EV_KEY. The events with the correct code but EV_SYN type are not forwarded to userspace. This also leads to a kernel oops when trying to print the report descriptor via debugfs. hid_resolv_event() tries to resolve a EV_SYN event with an EV_KEY code which leads to an out-of-bounds access in the EV_SYN names array. Fixes: bcfa8d1457 ("HID: input: Add support for Programmable Buttons") Fixes: f5854fad39 ("Input: hid-input - allow mapping unknown usages") Reported-by: Brent Roman <brent@mbari.org> Tested-by: Brent Roman <brent@mbari.org> Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-11-19HID: input: Fix parsing of HID_CP_CONSUMER_CONTROL fieldsHans de Goede
Fix parsing of HID_CP_CONSUMER_CONTROL fields which are not in the HID_CP_PROGRAMMABLEBUTTONS collection. Fixes: bcfa8d14570d ("HID: input: Add support for Programmable Buttons") BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2018096 Cc: Thomas Weißschuh <linux@weissschuh.net> Suggested-by: Benjamin Tissoires <btissoir@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-By: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-11-19HID: ft260: fix i2c probing for hwmon devicesMichael Zaidman
The below scenario causes the kernel NULL pointer dereference failure: 1. sudo insmod hid-ft260.ko 2. sudo modprobe lm75 3. unplug USB hid-ft260 4. plug USB hid-ft260 [ +0.000006] Call Trace: [ +0.000004] __i2c_smbus_xfer.part.0+0xd1/0x310 [ +0.000007] ? ft260_smbus_write+0x140/0x140 [hid_ft260] [ +0.000005] __i2c_smbus_xfer+0x2b/0x80 [ +0.000004] i2c_smbus_xfer+0x61/0xf0 [ +0.000005] i2c_default_probe+0xf9/0x130 [ +0.000004] i2c_detect_address+0x84/0x160 [ +0.000004] ? kmem_cache_alloc_trace+0xf6/0x200 [ +0.000009] ? i2c_detect.isra.0+0x69/0x130 [ +0.000005] i2c_detect.isra.0+0xbf/0x130 [ +0.000004] ? __process_new_driver+0x30/0x30 [ +0.000004] __process_new_adapter+0x18/0x20 [ +0.000004] bus_for_each_drv+0x84/0xd0 [ +0.000003] i2c_register_adapter+0x1e4/0x400 [ +0.000005] i2c_add_adapter+0x5c/0x80 [ +0.000004] ft260_probe.cold+0x222/0x2e2 [hid_ft260] [ +0.000006] hid_device_probe+0x10e/0x170 [hid] [ +0.000009] really_probe+0xff/0x460 [ +0.000004] driver_probe_device+0xe9/0x160 [ +0.000003] __device_attach_driver+0x71/0xd0 [ +0.000004] ? driver_allows_async_probing+0x50/0x50 [ +0.000004] bus_for_each_drv+0x84/0xd0 [ +0.000002] __device_attach+0xde/0x1e0 [ +0.000004] device_initial_probe+0x13/0x20 [ +0.000004] bus_probe_device+0x8f/0xa0 [ +0.000003] device_add+0x333/0x5f0 It happened when i2c core probed for the devices associated with the lm75 driver by invoking 2c_detect()-->..-->ft260_smbus_write() from within the ft260_probe before setting the adapter data with i2c_set_adapdata(). Moving the i2c_set_adapdata() before i2c_add_adapter() fixed the failure. Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com> Signed-off-by: Germain Hebert <germain.hebert@ca.abb.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-11-19MAINTAINERS: Update for VMware PVRDMA driverBryan Tan
Update maintainer info for the VMware PVRDMA driver. Link: https://lore.kernel.org/r/1637320770-44878-1-git-send-email-bryantan@vmware.com Reviewed-by: Adit Ranadive <aditr@vmware.com> Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Bryan Tan <bryantan@vmware.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-11-19blk-mq: don't insert FUA request with data into scheduler queueMing Lei
We never insert flush request into scheduler queue before. Recently commit d92ca9d8348f ("blk-mq: don't handle non-flush requests in blk_insert_flush") tries to handle FUA data request as normal request. This way has caused warning[1] in mq-deadline dd_exit_sched() or io hang in case of kyber since RQF_ELVPRIV isn't set for flush request, then ->finish_request won't be called. Fix the issue by inserting FUA data request with blk_mq_request_bypass_insert() when the device supports FUA, just like what we did before. [1] https://lore.kernel.org/linux-block/CAHj4cs-_vkTW=dAzbZYGxpEWSpzpcmaNeY1R=vH311+9vMUSdg@mail.gmail.com/ Reported-by: Yi Zhang <yi.zhang@redhat.com> Fixes: d92ca9d8348f ("blk-mq: don't handle non-flush requests in blk_insert_flush") Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20211118153041.2163228-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-19blk-cgroup: fix missing put device in error path from blkg_conf_pref()Yu Kuai
If blk_queue_enter() failed due to queue is dying, the blkdev_put_no_open() is needed because blkcg_conf_open_bdev() succeeded. Fixes: 0c9d338c8443 ("blk-cgroup: synchronize blkg creation against policy deactivation") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20211102020705.2321858-1-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-19ALSA: usb-audio: Don't start stream for capture at prepareTakashi Iwai
The recent change made mistakenly the stream for capture started at prepare stage. Add the stream direction check to avoid it. Fixes: 9c9a3b9da891 ("ALSA: usb-audio: Rename early_playback_start flag with lowlatency_playback") Link: https://lore.kernel.org/r/20211119102629.7476-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-11-19ALSA: usb-audio: Switch back to non-latency mode at a later pointTakashi Iwai
The recent regression report revealed that the judgment of the low-latency playback mode based on the runtime->stop_threshold cannot work reliably at the prepare stage, as sw_params call may happen at any time, and PCM dmix actually sets it up after the prepare call. This ended up with the stall of the stream as PCM ack won't be issued at all. For addressing this, check the free-wheeling mode again at the PCM trigger right before starting the stream again, and allow switching to the non-LL mode at a late stage. Fixes: d5f871f89e21 ("ALSA: usb-audio: Improved lowlatency playback support") Reported-and-tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Link: https://lore.kernel.org/r/20211117161855.m45mxcqszkfcetai@box.shutemov.name Link: https://lore.kernel.org/r/20211119102459.7055-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-11-18riscv: fix building external modulesAndreas Schwab
When building external modules, vdso_prepare should not be run. If the kernel sources are read-only, it will fail. Fixes: fde9c59aebaf ("riscv: explicitly use symbol offsets for VDSO") Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-11-18RISC-V: Enable KVM in RV64 and RV32 defconfigs as a moduleAnup Patel
Let's enable KVM RISC-V in RV64 and RV32 defconfigs as module so that it always built along with the default kernel image. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-11-19media: hi846: remove the of_match_ptr macroMartin Kepplinger
Similar to other drivers, this should fix a Clang compilar warning when building without CONFIG_OF in which case of_match_ptr() is NULL and the const struct we would use otherwise is unused. Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-19media: hi846: include property.h instead of of_graph.hMartin Kepplinger
Include the more portable property.h instead of the OF specific of_graph.h Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-19Merge tag 'amd-drm-fixes-5.16-2021-11-17' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.16-2021-11-17: amdgpu: - Better debugging info for SMU msgs - Better error reporting when adding IP blocks - Fix UVD powergating regression on CZ - Clock reporting fix for navi1x - OLED panel backlight fix - Fix scaling on VGA/DVI for non-DC display code - Fix GLFCLK handling for RGP on some APUs - fix potential memory leak amdkfd: - GPU reset fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211118041638.20831-1-alexander.deucher@amd.com
2021-11-19Merge tag 'drm-intel-fixes-2021-11-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes One quick fix for return error handling, one fix for ADL-P display and one revert targeting stable 5.4, for TGL's DSI display clocks Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YZbUPIHpR1S3JZ2b@intel.com
2021-11-19Merge tag 'drm-misc-fixes-2021-11-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes A infoframe corruption fix for nouveau, a wrong free function usage fix for GEM CMA helpers, a Kconfig dependency fix for sun4i, two fixes for drm/scheduler refcounting and a probing fix for efifb. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211118075447.5rn6zaulnrequqnm@gilmour
2021-11-18tracing: Don't use out-of-sync va_list in event printingNikita Yushchenko
If trace_seq becomes full, trace_seq_vprintf() no longer consumes arguments from va_list, making va_list out of sync with format processing by trace_check_vprintf(). This causes va_arg() in trace_check_vprintf() to return wrong positional argument, which results into a WARN_ON_ONCE() hit. ftrace_stress_test from LTP triggers this situation. Fix it by explicitly avoiding further use if va_list at the point when it's consistency can no longer be guaranteed. Link: https://lkml.kernel.org/r/20211118145516.13219-1-nikita.yushchenko@virtuozzo.com Signed-off-by: Nikita Yushchenko <nikita.yushchenko@virtuozzo.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-11-18tracing: Use memset_startat() to zero struct trace_iteratorKees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memset(), avoid intentionally writing across neighboring fields. Use memset_startat() to avoid confusing memset() about writing beyond the target struct member. Link: https://lkml.kernel.org/r/20211118202217.1285588-1-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-11-18Merge tag 'zstd-for-linus-5.16-rc1' of git://github.com/terrelln/linuxLinus Torvalds
Pull zstd fixes from Nick Terrell: "Fix stack usage on parisc & improve code size bloat This contains three commits: 1. Fixes a minor unused variable warning reported by Kernel test robot [0]. 2. Improves the reported code bloat (-88KB / 374KB) [1] by outlining some functions that are unlikely to be used in performance sensitive workloads. 3. Fixes the reported excess stack usage on parisc [2] by removing -O3 from zstd's compilation flags. -O3 triggered bugs in the hppa-linux-gnu gcc-8 compiler. -O2 performance is acceptable: neutral compression, about -1% decompression speed. We also reduce code bloat (-105KB / 374KB). After this our code bloat is cut from 374KB to 105KB with gcc-11. If we wanted to cut the remaining 105KB we'd likely have to trade signicant performance, so I want to say that this is enough for now. We should be able to get further gains without sacrificing speed, but that will take some significant optimization effort, and isn't suitable for a quick fix. I've opened an upstream issue [3] to track the code size, and try to avoid future regressions, and improve it in the long term" Link: https://lore.kernel.org/linux-mm/202111120312.833wII4i-lkp@intel.com/T/ [0] Link: https://lkml.org/lkml/2021/11/15/710 [1] Link: https://lkml.org/lkml/2021/11/14/189 [2] Link: https://github.com/facebook/zstd/issues/2867 [3] Link: https://lore.kernel.org/r/20211117014949.1169186-1-nickrterrell@gmail.com/ Link: https://lore.kernel.org/r/20211117201459.1194876-1-nickrterrell@gmail.com/ * tag 'zstd-for-linus-5.16-rc1' of git://github.com/terrelln/linux: lib: zstd: Don't add -O3 to cflags lib: zstd: Don't inline functions in zstd_opt.c lib: zstd: Fix unused variable warning
2021-11-18Merge tag 'thermal-5.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "These fix the handling of thermal zones during system resume and disable building of the int340x thermal driver on 32-bit. Specifics: - Prevent the previous high and low thermal zone trip values from being retained over a system suspend-resume cycle (Manaf Meethalavalappu Pallikunhi) - Prevent the int340x thermal driver from being built in 32-bit kernel configurations, because running it on 32-bit is questionable (Arnd Bergmann)" * tag 'thermal-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: core: Reset previous low and high trip during thermal zone init thermal: int340x: Limit Kconfig to 64-bit
2021-11-18Merge tag 'pm-5.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a system-wide suspend issue in the DTPM framework and improve the Energy Model documentation. Specifics: - Fix system suspend handling in DTPM when it is enabled, but not actually used (Daniel Lezcano) - Describe the new cpufreq callback for Energy Model registration and explain the "advanced" and "simple" EM variants in the EM documentation (Lukasz Luba)" * tag 'pm-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Documentation: power: Describe 'advanced' and 'simple' EM models Documentation: power: Add description about new callback for EM registration powercap: DTPM: Fix suspend failure and kernel warning
2021-11-18Merge tag 'acpi-5.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Revert the change attempting to release PM resources blocked by unused ACPI objects after device enumeration, because it caused boot issues to appear on multiple systems" * tag 'acpi-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI: scan: Release PM resources blocked by unused objects"
2021-11-18Merge tag 'platform-drivers-x86-v5.16-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Various build- and bug-fixes as well as one hardware-id addition" * tag 'platform-drivers-x86-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: thinkpad_acpi: fix documentation for adaptive keyboard platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deep platform/x86: thinkpad_acpi: Add support for dual fan control platform/x86: think-lmi: Abort probe on analyze failure platform/x86: dell-wmi-descriptor: disable by default platform/x86: samsung-laptop: Fix typo in a comment platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()' platform/x86: amd-pmc: Make CONFIG_AMD_PMC depend on RTC_CLASS platform/mellanox: mlxreg-lc: fix error code in mlxreg_lc_create_static_devices()
2021-11-18Merge tag 'spi-fix-v5.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few small fixes for v5.16, one in the core for an issue with handling of controller unregistration that was introduced with the fixes for registering nested SPI controllers and a few more minor device specific ones" * tag 'spi-fix-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fix use-after-free of the add_lock mutex spi: spi-geni-qcom: fix error handling in spi_geni_grab_gpi_chan() spi: lpspi: Silence error message upon deferred probe spi: cadence-quadspi: fix write completion support
2021-11-18ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCETakashi Iwai
When CONFIG_FORTIFY_SOURCE is set, memcpy() checks the potential buffer overflow and panics. The code in sofcpga bootstrapping contains the memcpy() calls are mistakenly translated as the shorter size, hence it triggers a panic as if it were overflowing. This patch changes the secondary_trampoline and *_end definitions to arrays for avoiding the false-positive crash above. Fixes: 9c4566a117a6 ("ARM: socfpga: Enable SMP for socfpga") Suggested-by: Kees Cook <keescook@chromium.org> Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192473 Link: https://lore.kernel.org/r/20211117193244.31162-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-11-18ALSA: ctxfi: Fix out-of-range accessTakashi Iwai
The master and next_conj of rcs_ops are used for iterating the resource list entries, and currently those are supposed to return the current value. The problem is that next_conf may go over the last entry before the loop abort condition is evaluated, and it may return the "current" value that is beyond the array size. It was caught recently as a GPF, for example. Those return values are, however, never actually evaluated, hence basically we don't have to consider the current value as the return at all. By dropping those return values, the potential out-of-range access above is also fixed automatically. This patch changes the return type of master and next_conj callbacks to void and drop the superfluous code accordingly. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214985 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211118215729.26257-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-11-18lib: zstd: Don't add -O3 to cflagsNick Terrell
After the update to zstd-1.4.10 passing -O3 is no longer necessary to get good performance from zstd. Using the default optimization level -O2 is sufficient to get good performance. I've measured no significant change to compression speed, and a ~1% decompression speed loss, which is acceptable. This fixes the reported parisc -Wframe-larger-than=1536 errors [0]. The gcc-8-hppa-linux-gnu compiler performed very poorly with -O3, generating stacks that are ~3KB. With -O2 these same functions generate stacks in the < 100B, completely fixing the problem. Function size deltas are listed below: ZSTD_compressBlock_fast_extDict_generic: 3800 -> 68 ZSTD_compressBlock_fast: 2216 -> 40 ZSTD_compressBlock_fast_dictMatchState: 1848 -> 64 ZSTD_compressBlock_doubleFast_extDict_generic: 3744 -> 76 ZSTD_fillDoubleHashTable: 3252 -> 0 ZSTD_compressBlock_doubleFast: 5856 -> 36 ZSTD_compressBlock_doubleFast_dictMatchState: 5380 -> 84 ZSTD_copmressBlock_lazy2: 2420 -> 72 Additionally, this improves the reported code bloat [1]. With gcc-11 bloat-o-meter shows an 80KB code size improvement: ``` > ../scripts/bloat-o-meter vmlinux.old vmlinux add/remove: 31/8 grow/shrink: 24/155 up/down: 25734/-107924 (-82190) Total: Before=6418562, After=6336372, chg -1.28% ``` Compared to before the zstd-1.4.10 update we see a total code size regression of 105KB, down from 374KB at v5.16-rc1: ``` > ../scripts/bloat-o-meter vmlinux.old vmlinux add/remove: 292/62 grow/shrink: 56/88 up/down: 235009/-127487 (107522) Total: Before=6228850, After=6336372, chg +1.73% ``` [0] https://lkml.org/lkml/2021/11/15/710 [1] https://lkml.org/lkml/2021/11/14/189 Link: https://lore.kernel.org/r/20211117014949.1169186-4-nickrterrell@gmail.com/ Link: https://lore.kernel.org/r/20211117201459.1194876-4-nickrterrell@gmail.com/ Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Nick Terrell <terrelln@fb.com>
2021-11-18lib: zstd: Don't inline functions in zstd_opt.cNick Terrell
`zstd_opt.c` contains the match finder for the highest compression levels. These levels are already very slow, and are unlikely to be used in the kernel. If they are used, they shouldn't be used in latency sensitive workloads, so slowing them down shouldn't be a big deal. This saves 188 KB of the 288 KB regression reported by Geert Uytterhoeven [0]. I've also opened an issue upstream [1] so that we can properly tackle the code size issue in `zstd_opt.c` for all users, and can hopefully remove this hack in the next zstd version we import. Bloat-o-meter output on x86-64: ``` > ../scripts/bloat-o-meter vmlinux.old vmlinux add/remove: 6/5 grow/shrink: 1/9 up/down: 16673/-209939 (-193266) Function old new delta ZSTD_compressBlock_opt_generic.constprop - 7559 +7559 ZSTD_insertBtAndGetAllMatches - 6304 +6304 ZSTD_insertBt1 - 1731 +1731 ZSTD_storeSeq - 693 +693 ZSTD_BtGetAllMatches - 255 +255 ZSTD_updateRep - 128 +128 ZSTD_updateTree 96 99 +3 ZSTD_insertAndFindFirstIndexHash3 81 - -81 ZSTD_setBasePrices.constprop 98 - -98 ZSTD_litLengthPrice.constprop 138 - -138 ZSTD_count 362 181 -181 ZSTD_count_2segments 1407 938 -469 ZSTD_insertBt1.constprop 2689 - -2689 ZSTD_compressBlock_btultra2 19990 423 -19567 ZSTD_compressBlock_btultra 19633 15 -19618 ZSTD_initStats_ultra 19825 - -19825 ZSTD_compressBlock_btopt 20374 12 -20362 ZSTD_compressBlock_btopt_extDict 29984 12 -29972 ZSTD_compressBlock_btultra_extDict 30718 15 -30703 ZSTD_compressBlock_btopt_dictMatchState 32689 12 -32677 ZSTD_compressBlock_btultra_dictMatchState 33574 15 -33559 Total: Before=6611828, After=6418562, chg -2.92% ``` [0] https://lkml.org/lkml/2021/11/14/189 [1] https://github.com/facebook/zstd/issues/2862 Link: https://lore.kernel.org/r/20211117014949.1169186-3-nickrterrell@gmail.com/ Link: https://lore.kernel.org/r/20211117201459.1194876-3-nickrterrell@gmail.com/ Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Nick Terrell <terrelln@fb.com>
2021-11-18lib: zstd: Fix unused variable warningNick Terrell
The variable `litLengthSum` is only used by an `assert()`, so when asserts are disabled the compiler doesn't see any usage and warns. This issue is already fixed upstream by PR #2838 [0]. It was reported by the Kernel test robot in [1]. Another approach would be to change zstd's disabled `assert()` definition to use the argument in a disabled branch, instead of ignoring the argument. I've avoided this approach because there are some small changes necessary to get zstd to build, and I would want to thoroughly re-test for performance, since that is slightly changing the code in every function in zstd. It seems like a trivial change, but some functions are pretty sensitive to small changes. However, I think it is a valid approach that I would like to see upstream take, so I've opened Issue #2868 to attempt this upstream. Lastly, I've chosen not to use __maybe_unused because all code in lib/zstd/ must eventually be upstreamed. Upstream zstd can't use __maybe_unused because it isn't portable across all compilers. [0] https://github.com/facebook/zstd/pull/2838 [1] https://lore.kernel.org/linux-mm/202111120312.833wII4i-lkp@intel.com/T/ [2] https://github.com/facebook/zstd/issues/2868 Link: https://lore.kernel.org/r/20211117014949.1169186-2-nickrterrell@gmail.com/ Link: https://lore.kernel.org/r/20211117201459.1194876-2-nickrterrell@gmail.com/ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nick Terrell <terrelln@fb.com>
2021-11-18Merge tag 'net-5.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, mac80211. Current release - regressions: - devlink: don't throw an error if flash notification sent before devlink visible - page_pool: Revert "page_pool: disable dma mapping support...", turns out there are active arches who need it Current release - new code bugs: - amt: cancel delayed_work synchronously in amt_fini() Previous releases - regressions: - xsk: fix crash on double free in buffer pool - bpf: fix inner map state pruning regression causing program rejections - mac80211: drop check for DONT_REORDER in __ieee80211_select_queue, preventing mis-selecting the best effort queue - mac80211: do not access the IV when it was stripped - mac80211: fix radiotap header generation, off-by-one - nl80211: fix getting radio statistics in survey dump - e100: fix device suspend/resume Previous releases - always broken: - tcp: fix uninitialized access in skb frags array for Rx 0cp - bpf: fix toctou on read-only map's constant scalar tracking - bpf: forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs - tipc: only accept encrypted MSG_CRYPTO msgs - smc: transfer remaining wait queue entries during fallback, fix missing wake ups - udp: validate checksum in udp_read_sock() (when sockmap is used) - sched: act_mirred: drop dst for the direction from egress to ingress - virtio_net_hdr_to_skb: count transport header in UFO, prevent allowing bad skbs into the stack - nfc: reorder the logic in nfc_{un,}register_device, fix unregister - ipsec: check return value of ipv6_skip_exthdr - usb: r8152: add MAC passthrough support for more Lenovo Docks" * tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits) ptp: ocp: Fix a couple NULL vs IS_ERR() checks net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock() net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound ipv6: check return value of ipv6_skip_exthdr e100: fix device suspend/resume devlink: Don't throw an error if flash notification sent before devlink visible page_pool: Revert "page_pool: disable dma mapping support..." ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port() octeontx2-af: debugfs: don't corrupt user memory NFC: add NCI_UNREG flag to eliminate the race NFC: reorder the logic in nfc_{un,}register_device NFC: reorganize the functions in nci_request tipc: check for null after calling kmemdup i40e: Fix display error code in dmesg i40e: Fix creation of first queue by omitting it if is not power of two i40e: Fix warning message and call stack during rmmod i40e driver i40e: Fix ping is lost after configuring ADq on VF i40e: Fix changing previously set num_queue_pairs for PFs i40e: Fix NULL ptr dereference on VSI filter sync i40e: Fix correct max_pkt_size on VF RX queue ...
generated by cgit (git 2.34.1) at 2025-09-27 16:24:52 +0000