summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-06-29Merge branch 'for-3.0' into for-3.1Mark Brown
2011-06-29ASoC: Change WM9081 speaker output enable to _OUT_DRVMark Brown
More for neatness than any actual performance improvement. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-29ASoC: Correct left/right swap in wm_hubs DC offset correctionMark Brown
It was consistently wrong for everything except WM8993 so should be no functional change. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.comm>
2011-06-29ASoC: Fix Blackfin I2S _pointer() implementation return in bounds valuesMark Brown
The Blackfin DMA controller can report one frame beyond the end of the buffer in the wraparound case but ALSA requires that the pointer always be in the buffer. Do the wraparound to handle this. A similar bug is likely to apply to the other Blackfin PCM drivers but the code is less obvious to inspection and I don't have a user to test. Reported-by: Kieran O'Leary <Kieran.O'Leary@wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-06-29ALSA: HDMI - fix ELD monitor name lengthWu Fengguang
I noticed that the last character of the ELD monitor name is lost, this fixes the issue. This fix should be confirming to the HDA spec, and works together with the DRM part of the ELD patch. The HDA spec does not mention that Monitor_Name_String is an '\0' ending string, and it allows NML to be 1, which is only valid when MNL does not count the possible ending '\0'. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-29ALSA: hda - Fix jack-detection on non-VT1708 VIA codecsLydia Wang
Move codec init verb which is only applicatable for VT1708. I've found the root cause that jack plugged in can't be detected. The verb in vt1708_init_verbs is used to power down jack detect circuit. This verb is only applicable to VT1708. vt1708 didn't implement jack detect function in hardware, so we should shut down this function to avoid noise. But for other codecs, hardware implement jack detect function. If sending this verb during initialization, jack detect will be invalid. So I move this verb from via_parse_auto_config() to patch_vt1708(). Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-29ALSA: hda - Fix unused variable warningTakashi Iwai
sound/pci/hda/patch_cmedia.c: In function ‘cmi9880_fill_multi_init’: sound/pci/hda/patch_cmedia.c:401:15: warning: unused variable ‘len’ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-29ALSA: hda - Enable auto-parser as default for Conexant codecsTakashi Iwai
Let's use auto-parser as default now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-29Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2011-06-29ALSA: hda - Create snd_hda_get_conn_index() helper functionTakashi Iwai
Create snd_hda_get_conn_index() helper function for obtaining the connection index of the widget. Replaced the similar codes used in several codec-drivers with this common helper. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-29ALSA: hda - Fix unsol event initializations for VIA codecsLydia Wang
Fix a issue to enable unsolicited response to line-out pins. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-28ASoC: Blackfin: Add machine driver for EVAL-ADAV80X boardsLars-Peter Clausen
Add a machine driver to support the EVAL-ADAV801 and EVAL-ADAV803 boards connected to a Analog Devices BF5XX evaluation board. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-28ASoC: Add ADAV80x codec driverLars-Peter Clausen
This patch adds support for the Analog Devices ADAV801 and ADAV803 audio codec. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-28ALSA: atmel - update author email for ABDAC, AC97C and AT73C213Hans-Christian Egtvedt
This patch updates the email address of the sound drivers supported by me to an email account I will use on a more regular basis in the future. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-28ALSA: HDA: Add model=auto quirk for Acer Aspire 3830TGDavid Henningsson
Since we're not using the new auto parser as a fallback yet, add it manually as a quirk. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-28ALSA: HDA: Add a new Conexant codec ID (506c)David Henningsson
Conexant ID 506c was found on Acer Aspire 3830TG. As users report no playback, sending to stable should be safe. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/783582 Reported-by: andROOM Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-28ALSA: hda - Fix warnings with CONFIG_SND_POWER_SAVE=nTakashi Iwai
Use static inline for dummy function to fix the warnings like below sound/pci/hda/patch_sigmatel.c: In function ‘stac92xx_init’: sound/pci/hda/patch_sigmatel.c:4387:3: warning: statement with no effect sound/pci/hda/patch_sigmatel.c: In function ‘stac92xx_resume’: sound/pci/hda/patch_sigmatel.c:4927:3: warning: statement with no effect Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-28ALSA: hda - remove SND_HDA_POWER_SAVE protection of struct hda_loopback_checkStephen Rothwell
to fix build problems when it is disabled. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27ALSA: hda - More volume-init fixes for ALC267 codecTakashi Iwai
More similar fixes like previous commits: handle the exceptional case like ALC267 where no volume amp is found in ADC widget but in the capsrc widget instead. Also minor checks for avoiding possible erros: no connection-select when the pin has a single selection, and add beep verbs only when the 0x1d is used for beep. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27ALSA: hda - Fix volume-init for ALC259 with invalid widget capsTakashi Iwai
ALC259 seems to provide an invalid widget capability for the input-src selector widget. The widget shows the input-amp while it's a selector, and this confuses the current ALC882 initialization code that is used for ALC259, too. For fixing this, check the amp capability and handle the connection selection individually. Also, ALC259 has no mute bit in DAC volume, so we need to initialize it as ZERO instead of MUTE. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27ALSA: hda - Fix volume-init of ALC299 & coTakashi Iwai
ALC269 and compatible codecs have the output volume in DACs, thus we can't use the ALC880's code as is. Fixed by checking the amp caps and picking up the right widget for initialization. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27ALSA: hda - Simplify EAPD control in patch_realtek.cTakashi Iwai
Look through the known NIDs that may have EAPD capabilities and turn on/off them appropriately instead of checking the individual vendor ids. This will also avoid the forgotten entries of newly added codec ids in future. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27ALSA: hda - Fix auto-init of output volumes of Realtek codecsTakashi Iwai
Fix the regression introduced by the commit 1f0f4b8036b1fe1347cb4f1f199601b87de9be46 ALSA: hda - Reduce static init verbs for Realtek auto-parsers The input amps of mixer widgets should be unmuted as default (as usually they have no assigned mixer switches). More fixes in this commit are, however, for ALC260: ALC260 codec can have multiple output mixers connnected to a single DAC althouh the driver didn't pick up them properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27Merge branch 'topic/via-cleanup' into topic/hdaTakashi Iwai
2011-06-27ALSA: hda - Check hard-wired DACs at first for ALC662 & coTakashi Iwai
Some Realtek codecs have the output pins hardwired with certain DACs. These DACs have to be assigned at first and assign the rest for multi-DAC pins so that all DACs can be assigned properly. Without such an optimization, speaker outputs may be assigned to the same DAC as the headphone or others. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27ALSA: hda - Call proper DAC-filler function for Realtek auto-parserTakashi Iwai
In alc_auto_add_multi_channel_mode(), when the primary HP workaround is enabled, it re-initializes the DAC list but calls alc662's function in a fixed way. This isn't pretty suitable for other codecs, of course. Now we call it with fill_dac function pointer so that the proper function can be called at that point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27ALSA: hda - Reduce static init verbs for Realtek auto-parsersTakashi Iwai
Instead of using fixed init verbs, initialize DACs, ADCs and mixers more dynamically for Realtek auto-parsers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-26ASoC: SAMSUNG: Add idma related register definitionSangbeom Kim
This patch add idma related register definitions to support idma. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-26ASoC: SAMSUNG: Move I2S common register definitionSangbeom Kim
I2S registers can be used for control idma. Previously, register is defined in i2s.c. For sharing the registers, It is moved to i2s-regs.h Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-26ASoC: SAMSUNG: Add WM8994 PCM Machine driverSangbeom Kim
This patch add WM8994 PCM machine driver to support PCM audio on SMDKV310, SMDKC210 boards. Playback and Capture supports 8kHz sampling rates. and It is tested on SMDKV310, SMDKC210. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-25ALSA: hda - Add snd_hda_get_conn_list() helper functionTakashi Iwai
Add a new helper function snd_hda_get_conn_list(). Unlike snd_hda_get_connections(), this function doesn't copy the connection-list but gives the raw pointer for the cached list. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-25ALSA: lx6464es - include mac address in device nameTim Blechmann
each device has a unique mac address, which can be used to distinguish multiple devices in the same machine. we therefore include the full mac address in the device shortname and the last 6 bytes in the device id. Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-24ALSA: lola - Fix for Lola280 boardMarkus Bollinger
- add/fix comments and debug messages - fix incomplete matrix init - comment out creation of buggy lola_dest_gain_mixer controls - minor optimisations Signed-off-by: Markus Bollinger <bollinger@digigram.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-24Merge branch 'fix/asoc' into for-linusTakashi Iwai
2011-06-24ALSA: Remove unneeded version.h includes from sound/Jesper Juhl
In the sound/ directory there are two files (flagged by 'make versioncheck'); sound/pci/asihpi/asihpi.c and sound/soc/codecs/wm8991.c that include linux/version.h although they don't need it. This patch removes the unneeded includes. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-24ALSA: hda - Use alc_get_pfx_name() for all Realtek codecsTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-24ALSA: hda - Clean up multi-channel mixer name assignment in patch_realtek.cTakashi Iwai
Change alc_get_line_out_pfx() in patch_realtek.c to provide the channel specific name and assign the index so that each caller doesn't have to set the channel name by itself. Also, check the multi-io case with the primary hp-out; for the multi-io channels, assign the channel name instead of "Headphone" with indices. This makes the mixer names more intuitive and reduces confusion. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-24ALSA: hda - Add a workaround for invalid line-out setupsTakashi Iwai
Some BIOS set up the pin config wrongly as line-out although it's supposed to be a speaker out. In most cases, though, we can judge the validity by checking the connection type -- when it's FIXED, mostly it's an invalid line-out but a speaker. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-24Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2011-06-24ALSA: hda - Allow multi-io with HP output for ALC662 & coTakashi Iwai
Even if the machine has no line-out but only HP-out, try to detect the multi-io. It'll allow more possibilities for 5.1 outputs on laptops. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-23Merge branch 'for-3.0' into for-3.1Mark Brown
2011-06-23ASoC: pxa-ssp: Correct check for stream presenceDaniel Mack
Don't rely on the codec's channels_min information to decide wheter or not allocate a substream's DMA buffer. Rather check if the substream itself was allocated previously. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-06-23ASoC: imx: add missing module informationsArnaud Patard (Rtp)
- add some modules aliases - add module license to avoid tainted kernel when loading the imx-pcm-audio driver Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-23ASoC: imx: Remove unused Kconfig SND_MXC_SOC_SSI entryArnaud Patard (Rtp)
SND_MXC_SOC_SSI looks to be unused, so kill it. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-23ASoC: Add basic WM8918 supportMark Brown
The WM8918 is register compatible with the WM8904 with a subset of the functionality. Add the device ID, a subsequent patch will ensure that only the relevant functionality is exported to userspace. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-23ASoC: Allow suppression of series updates on wm_hubs devicesMark Brown
Some devices do not support manual updates of the DC servo. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-23ASoC: Trigger wm_hubs series update startup off a separate flagMark Brown
Allowing the two to be used independently. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-23ALSA: HDA: Pinfix quirk for HP Z200 WorkstationDavid Henningsson
BIOS lists the internal speaker as an internal line-out. Change to internal speaker + model=auto for better auto-mute capabilities. BugLink: http://bugs.launchpad.net/bugs/754964 Reported-by: Marc Legris <marc.legris@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-22ASoC: add WM8782 ADC Codec DriverJohannes Stezenbach
Signed-off-by: Johannes Stezenbach <js@sig21.net> [zonque@gmail.com: transform to new ASoC structure] Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-22ASoC: add STA32X codec driverJohannes Stezenbach
Signed-off-by: Johannes Stezenbach <js@sig21.net> [zonque@gmail.com: transform to new ASoC structure] Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit (git 2.34.1) at 2025-09-12 22:55:56 +0000