summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-08-04arm64: dts: qcom: sdm630-nile: Enable uSD card slotKonrad Dybcio
Enable the internal uSD slot to let the user have more storage. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-37-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630-nile: Specify ADSP firmware nameKonrad Dybcio
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-36-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630-nile: Add Synaptics touchscreen.Konrad Dybcio
Delete the node on Ganges devices, as they use a different one. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-35-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630-xperia: Retire sdm630-sony-xperia-ganges.dtsiKonrad Dybcio
After further consideration, it is not worth to keep another separate DTSI, as the differences between Nile and Ganges are very minimal. Instead, let's just address the minimal differences between Kirin and Mermaid. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-34-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630-nile: Add Volume up keyKonrad Dybcio
Let's get loud! Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-33-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630-nile: Add USBKonrad Dybcio
Enable and configure DWC3 and QUSB2 PHY to enable USB functionality on Nile and Ganges boards. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-32-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630-nile: Use &labelsKonrad Dybcio
Refer to nodes by their labels to match the current convention. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-31-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630-xperia-nile: Add all RPM and fixed regulatorsAngeloGioacchino Del Regno
Add all of the RPM PM660/PM660L regulators and the fixed ones, defining the common electrical part of this platform. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-30-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm660: Add required nodes for DSI1Konrad Dybcio
Configure the second DSI host/phy and account for them in the mmcc node. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-29-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630: Configure the camera subsystemAngeloGioacchino Del Regno
Add nodes for camss, cci and its pinctrl in order to bring up camera functionality. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-28-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630: Add IMEM nodeKonrad Dybcio
Add IMEM node and PIL reloc info as its child. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-27-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: Add device tree for SDM636Konrad Dybcio
This SoC is almost identical to its older brother, SDM660, with a few minor exceptions like the different GPU. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-26-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm660: Make the DTS an overlay on top of 630Konrad Dybcio
There is SO MUCH common code between these two SoCs that it makes no sense to keep what is essentially a duplicate of 630.dtsi. Instead, it's better to just change the things that differ. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-25-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: pm660(l): Add VADC and temp alarm nodesKonrad Dybcio
Add VADC, temperature alarm and thermal zones for pm660(l) to allow for temperature and voltage readouts and prevent PMIC overheating. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-24-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: pm660l: Support SPMI regulators on PMIC sid 3AngeloGioacchino Del Regno
The PM660L PMIC has SPMI regulators on the PMIC SID 3: let's add the compatible in order to probe them. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-23-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: pm660l: Add WLED supportKonrad Dybcio
This will enable backlight control on WLED-enabled devices. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-22-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: pm660: Support SPMI regulators on PMIC sid 1AngeloGioacchino Del Regno
The PM660 PMIC has SPMI regulators on the PMIC SID 1: let's declare the second pmic subtree and add the spmi vregs compatible to probe them there. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-21-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630: Add Adreno 508 GPU configurationAngeloGioacchino Del Regno
The SDM630 SoC features an Adreno 508.0 GPU with a minimum frequency of 160MHz and a maximum of (depending on the speed-bin) 775MHz. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-20-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630: Raise tcsr_mutex_regs sizeKonrad Dybcio
Enlarge the size to make sure all relevant registers can be reached. This will be required to support the modem. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-19-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630: Add ADSP remoteproc configurationKonrad Dybcio
Configure the ADSP remote processor and add a simple sound{} node to make way for future development. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-18-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630: Add thermal-zones configurationKonrad Dybcio
Add a basic thermal-zones configuration to make sure the SoC doesn't overheat itself to death. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-17-konrad.dybcio@somainline.org [bjorn: Sorted thermal-zones below "soc"] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630: Add modem/ADSP SMP2P nodesKonrad Dybcio
Add SMP2P nodes that are required for ADSP and modem bringup. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-16-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630: Add TSENS nodeKonrad Dybcio
This will enable temperature reporting for various SoC components. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-15-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630: Add qcom,adreno-smmu compatibleAngeloGioacchino Del Regno
The Adreno SMMU in SDM630 needs this compatible string for proper context handling and split pagetables support. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-14-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630: Add clocks and power domains to SMMU nodesAngeloGioacchino Del Regno
Add the required clocks and power domains for the SMMUs to work. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-13-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630: Add GPU Clock Controller nodeAngeloGioacchino Del Regno
Add the GPU Clock Controller in SDM630 and keep it disabled by default. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-12-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630: Add interconnect and opp table to sdhc_1AngeloGioacchino Del Regno
The SDHC port 1 has interconnects and can make use of DVFS: define the interconnections and the OPP table in order to optimize performance and power consumption. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-11-konrad.dybcio@somainline.org [bjorn: Dropped "sdhc1-" prefix from opp-table node] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630: Add SDHCI2 nodeAngeloGioacchino Del Regno
This will enable usage of (generally) uSD cards. While at it, add accompanying OPP table for DVFS. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-10-konrad.dybcio@somainline.org [bjorn: Dropped "sdhci1-" prefix from opp-table node] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630: Fix TLMM node and pinctrl configurationAngeloGioacchino Del Regno
Previous pinctrl configuration was wrong. Fix it and clean up how multi-pin states are described. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-9-konrad.dybcio@somainline.org [bjorn: Polished the commit message] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630: Add USB configurationKonrad Dybcio
This will let us use USB2 on our devices. The SoC supposedly supports USB3, but there are no known cases of devices that actually have USB3 wired up in hardware. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-8-konrad.dybcio@somainline.org [bjorn: Changes dwc3 node name to "usb"] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630: Add qfprom subnodesAngeloGioacchino Del Regno
These will be required for USB and Adreno support. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-7-konrad.dybcio@somainline.org [bjorn: y/_/-/ in gpu_speed_bin] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630: Add MDSS nodesKonrad Dybcio
Add MDSS node along with its children to enable display functionality. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-6-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630: Add interconnect provider nodesKonrad Dybcio
Add interconnect provider nodes to allow for NoC bus scaling. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-5-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630: Add MMCC nodeKonrad Dybcio
Add MultiMedia Clock Controller node to allow for accessing and controlling Multimedia Subsystem clocks by their respective users. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-4-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630: Add RPMPD nodesKonrad Dybcio
Add the rpmpd node on the sdm630 and define the available levels. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-3-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sdm630: Rewrite memory mapAngeloGioacchino Del Regno
The memory map was wrong. Fix it. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-2-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sm8150: Fix incorrect cpu opp table entryThara Gopinath
CPU0 frequency 768MHz is wrongly modeled as 576000000 hz in cpu0_opp_table. Use the correct value 768000000 hz. Fixes: 2b6187abafea ("arm64: dts: qcom: sm8150: Add CPU opp tables") Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210804132847.2503269-1-thara.gopinath@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: sm8150-mtp: Add 8150 compatible stringThara Gopinath
Add "qcom,sm8150" as one of the platform compatible strings. This will be later used by cpufreq-dt-platdev to exclude using cpufreq-dt cpufreq driver. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210804133223.2503517-1-thara.gopinath@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-03arm64: dts: qcom: Add support for SONY Xperia X Performance / XZ / XZs ↵AngeloGioacchino Del Regno
(msm8996, Tone platform) Add support for following boards: - Xperia X Performance (dora) - Xperia XZ (kagura) - Xperia XZs (keyaki) They are all based on the SONY Tone platform and feature largely similar hardware with the most obvious differences being lack of USB-C and ToF sensor on Dora and different camera sensor on Keyaki. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210608202143.247427-4-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-03arm64: dts: qcom: msm8996-*: Disable HDMI by defaultKonrad Dybcio
Most phones ship without HDMI and leaving it enabled wrecks havoc. Disable it in msm8996.dtsi and re-enable it on the boards that did not disable it previously. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210608202143.247427-3-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-03arm64: dts: qcom: Add MSM8996v3.0 DTSI fileKonrad Dybcio
Add an overlay for MSM8996v3.0, which is a pre-final revision of the said SoC. It has some stark differences with regards to GPU, or more specifically its power delivery path. Oh, and of course a different msm-id. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210608202143.247427-2-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-03arm64: dts: qcom: Add PMI8996 DTSI fileKonrad Dybcio
PMI8996 is *almost* the same hardware as PMI8994, say for some annoyances: - Boards equipped with PMI8996 now have to include pmic-id (which wasn't the case before) - Different qpnp-ibb-discharge-resistor value (will be addressed after LABIBB is introduced) - Different inhibit-derating-ua value (will be addressed after BCL is introduced) - Different ramp_up_step value (will be addressed after [if?] QPNP Flash LED is introduced) This DTSI is supposed to be included >>ON TOP OF<< pmi8994.dtsi, like this: -- msm8996-nice-device.dts -- \#include "pmi8994.dtsi" \#include "pmi8996.dtsi" or more likely like this: -- msm8996-some-phone.dts -- \#include "msm8996.dtsi" ... \#include "pmi8994.dtsi" -- msm8996-pmi8996-some-phone.dts -- \#include "msm8996-some-phone.dts" \#include "pmi8996.dtsi" So that we only have to keep 2 DTs for devices that were shipped with both ones, instead of what would be three (device base + pmi8994 + pmi8996) Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210608202143.247427-1-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-07-21arm64: dts: qcom: sc7180: trogdor: Update audio codec to Max98360AJudy Hsiao
Use max98360a dts node to correctly describe the hardware. Signed-off-by: Judy Hsiao <judyhsiao@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20210625045010.2914289-1-judyhsiao@chromium.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-07-20arm64: dts: qcom: sc7280: Add USB nodes for IDP boardSandeep Maheswaram
Add USB nodes for sc7280 IDP board. Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1625576413-12324-4-git-send-email-sanm@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-07-20arm64: dts: qcom: sc7280: Add USB related nodesSandeep Maheswaram
Add nodes for DWC3 USB controller, QMP and HS USB PHYs in sc7280 SOC. Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1625576413-12324-3-git-send-email-sanm@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-07-20arm64: dts: qcom: sc7280: Add nodes for eMMC and SD cardShaik Sajida Bhanu
Add nodes for eMMC and SD card on sc7280. Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1626159971-22519-1-git-send-email-sbhanu@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-07-20arm64: dts: qcom: Fix usb entries for SA8155p adp boardBhupesh Sharma
SA8155p adp board has two USB A-type receptacles called USB-portB and USB-portC respectively. While USB-portB is a USB High-Speed connector/interface, the USB-portC one is a USB 3.1 Super-Speed connector/interface. Also the USB-portB is used as the USB emergency download port (for image download purposes). Enable both the ports on the board in USB Host mode (since all the USB interfaces are brought out to USB Type A connectors). Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20210627114616.717101-4-bhupesh.sharma@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-07-20arm64: dts: qcom: sm8150: Sort dc_noc and gem_noc nodesBhupesh Sharma
Nodes should be sorted by address, so move the dc_noc and gem_noc nodes to their correct place. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20210627114616.717101-3-bhupesh.sharma@linaro.org [bjorn: Adjusted order slightly more] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-07-20arm64: dts: qcom: Use correct naming for dwc3 usb nodes in dts filesBhupesh Sharma
The dwc3 usb nodes in several arm64 qcom dts are currently named differently, somewhere as 'usb@<addr>' and somewhere as 'dwc3@<addr>', leading to some confusion when one sees the entries in sysfs or dmesg: [ 1.943482] dwc3 a600000.usb: Adding to iommu group 1 [ 2.266127] dwc3 a800000.dwc3: Adding to iommu group 2 Name the usb nodes as 'usb@<addr>' for consistency, which is the correct convention as per the 'snps,dwc3' dt-binding as well (see [1]). [1]. Documentation/devicetree/bindings/usb/snps,dwc3.yaml Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20210627114616.717101-2-bhupesh.sharma@linaro.org [bjorn: Extended to also fix ipq6018] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-07-20arm64: dts: qcom: sm8150: Add UFS ICE capabilityBhupesh Sharma
Add support for UFS ICE (Qualcomm Inline Crypto Engine) in sm8150 SoC dts. I tested this on SA8155p-adp board, which is a publicly available development board that uses the sa8155p Qualcomm Snapdragon SoC. SA8155p platform is similar to the SM8150, so use this as base for now. I tested the UFS ICE feature using 'fscrypt' test utility. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Eric Biggers <ebiggers@google.com> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20210706133814.621536-1-bhupesh.sharma@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-11 22:52:39 +0000