summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-01-07bpf, doc: add note for libbpf's stand-alone buildDaniel Borkmann
Given this came up couple of times, add a note to libbpf's readme about the semi-automated mirror for a stand-alone build which is officially managed by BPF folks. While at it, also explicitly state the libbpf license in the readme file. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-07bpf, doc: update design qa to reflect kern_version requirementDaniel Borkmann
Update the bpf_design_QA.rst to also reflect recent changes in 6c4fc209fcf9 ("bpf: remove useless version check for prog load"). Suggested-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-07ceph: use vmf_error() in ceph_filemap_fault()Souptick Joarder
This code is converted to use vmf_error(). Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-01-07libceph: allow setting abort_on_full for rbdDongsheng Yang
Introduce a new option abort_on_full, default to false. Then we can get -ENOSPC when the pool is full, or reaches quota. [ Don't show abort_on_full in /proc/mounts. ] Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-01-07MIPS: ath79: Enable OF serial ports in the default configAlban Bedel
CONFIG_SERIAL_OF_PLATFORM is needed to get a working console on the OF boards, enable it in the default config to get a working setup out of the box. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-kernel@vger.kernel.org
2019-01-07MIPS: lantiq: Use CP0_LEGACY_COMPARE_IRQHauke Mehrtens
Instead of using the lantiq specific MIPS_CPU_TIMER_IRQ use the generic CP0_LEGACY_COMPARE_IRQ constant for the timer interrupt number. MIPS_CPU_TIMER_IRQ was already defined to 7 for both supported SoC families. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: jhogan@kernel.org Cc: ralf@linux-mips.org Cc: john@phrozen.org Cc: linux-mips@linux-mips.org Cc: linux-mips@vger.kernel.org
2019-01-07MIPS: lantiq: Fix IPI interrupt handlingHauke Mehrtens
This makes SMP on the vrx200 work again, by removing all the MIPS CPU interrupt specific code and making it fully use the generic MIPS CPU interrupt controller. The mti,cpu-interrupt-controller from irq-mips-cpu.c now handles the CPU interrupts and also the IPI interrupts which are used to communication between the CPUs in a SMP system. The generic interrupt code was already used before but the interrupt vectors were overwritten again when we called set_vi_handler() in the lantiq interrupt driver and we also provided our own plat_irq_dispatch() function which overwrote the weak generic implementation. Now the code uses the generic handler for the MIPS CPU interrupts including the IPI interrupts and registers a handler for the CPU interrupts which are handled by the lantiq ICU with irq_set_chained_handler() which was already called before. Calling the set_c0_status() function is also not needed any more because the generic MIPS CPU interrupt already activates the needed bits. Fixes: 1eed40043579 ("MIPS: smp-mt: Use CPU interrupt controller IPI IRQ domain support") Cc: stable@kernel.org # v4.12 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: jhogan@kernel.org Cc: ralf@linux-mips.org Cc: john@phrozen.org Cc: linux-mips@linux-mips.org Cc: linux-mips@vger.kernel.org
2019-01-07selftests/bpf: fix incorrect users of create_and_get_cgroupStanislav Fomichev
We have some tests that assume create_and_get_cgroup returns -1 on error which is incorrect (it returns 0 on error). Since fd might be zero in general case, change create_and_get_cgroup to return -1 on error and fix the users that assume 0 on error. Fixes: f269099a7e7a ("tools/bpf: add a selftest for bpf_get_current_cgroup_id() helper") Fixes: 7d2c6cfc5411 ("bpf: use --cgroup in test_suite if supplied") v2: - instead of fixing the uses that assume -1 on error, convert the users that assume 0 on error (fd might be zero in general case) Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-07RDMA/nldev: Don't expose unsafe global rkey to regular userLeon Romanovsky
Unsafe global rkey is considered dangerous because it exposes memory registered for all memory in the system. Only users with a QP on the same PD can use the rkey, and generally those QPs will already know the value. However, out of caution, do not expose the value to unprivleged users on the local system. Require CAP_NET_ADMIN instead. Cc: <stable@vger.kernel.org> # 4.16 Fixes: 29cf1351d450 ("RDMA/nldev: provide detailed PD information") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-07smc: move unhash as early as possible in smc_release()Cong Wang
In smc_release() we release smc->clcsock before unhash the smc sock, but a parallel smc_diag_dump() may be still reading smc->clcsock, therefore this could cause a use-after-free as reported by syzbot. Reported-and-tested-by: syzbot+fbd1e5476e4c94c7b34e@syzkaller.appspotmail.com Fixes: 51f1de79ad8e ("net/smc: replace sock_put worker by socket refcounting") Cc: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reported-by: syzbot+0bf2e01269f1274b4b03@syzkaller.appspotmail.com Reported-by: syzbot+e3132895630f957306bc@syzkaller.appspotmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-07phy: ti: Fix compilation failures without REGMAPJason Gunthorpe
This driver requires regmap or the compile fails: drivers/phy/ti/phy-gmii-sel.c:43:27: error: array type has incomplete element type ‘struct reg_field’ const struct reg_field (*regfields)[PHY_GMII_SEL_LAST]; Add it to kconfig. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-07RDMA/uverbs: Fix post send success return value in case of errorGal Pressman
If get QP object fails 'ret' must be assigned with a proper error code. Fixes: 9a0738575f26 ("RDMA/uverbs: Use uverbs_response() for remaining response copying") Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-07ACPI/IORT: Fix build when CONFIG_IOMMU_API=nQian Cai
Commit 8097e53eaba2 ("ACPI/IORT: Use helper functions to access dev->iommu_fwspec") changed by mistake the iort_fwspec_iommu_ops() stub definition (compiled in when CONFIG_IOMMU_API=n), that caused the following compilation failure: drivers/acpi/arm64/iort.c:880:1: error: expected identifier or '(' before '{' token { return NULL; } ^ drivers/acpi/arm64/iort.c:879:39: warning: 'iort_fwspec_iommu_ops' used but never defined static inline const struct iommu_ops *iort_fwspec_iommu_ops(struct device *dev); ^~~~~~~~~~~~~~~~~~~~~ Fix it. Fixes: 8097e53eaba2 ("ACPI/IORT: Use helper functions to access dev->iommu_fwspec") Signed-off-by: Qian Cai <cai@lca.pw> [lorenzo.pieralisi@arm.com: updated tags and log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Joerg Roedel <jroedel@suse.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-07net: bridge: fix a bug on using a neighbour cache entry without checking its ↵JianJhen Chen
state When handling DNAT'ed packets on a bridge device, the neighbour cache entry from lookup was used without checking its state. It means that a cache entry in the NUD_STALE state will be used directly instead of entering the NUD_DELAY state to confirm the reachability of the neighbor. This problem becomes worse after commit 2724680bceee ("neigh: Keep neighbour cache entries if number of them is small enough."), since all neighbour cache entries in the NUD_STALE state will be kept in the neighbour table as long as the number of cache entries does not exceed the value specified in gc_thresh1. This commit validates the state of a neighbour cache entry before using the entry. Signed-off-by: JianJhen Chen <kchen@synology.com> Reviewed-by: JinLin Chen <jlchen@synology.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-07Fix a handful of audit-related issuePalmer Dabbelt
This is sort of a mix between a new feature and a bug fix. I've managed to screw up merging this patch set a handful of times but I think it's OK this time around. The main new feature here is audit support for RISC-V, with some fixes to audit-related bugs that cropped up along the way: * The addition of NR_syscalls into unistd.h, which is necessary for CONFIG_FTRACE_SYSCALLS. * The definition of CREATE_TRACE_POINTS so __tracepoint_sys_{enter,exit} get defined. * A fix for trace_sys_exit() so we can enable CONFIG_HAVE_SYSCALL_TRACEPOINTS.
2019-01-07tipc: fix memory leak in tipc_nl_compat_publ_dumpGustavo A. R. Silva
There is a memory leak in case genlmsg_put fails. Fix this by freeing *args* before return. Addresses-Coverity-ID: 1476406 ("Resource leak") Fixes: 46273cf7e009 ("tipc: fix a missing check of genlmsg_put") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-07cdc_ether: trivial whitespace readability fixBjørn Mork
This function is unreadable enough without indenting mismatches and unnecessary line breaks. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-07USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGBJack Stocker
To match the Corsair Strafe RGB, the Corsair K70 RGB also requires USB_QUIRK_DELAY_CTRL_MSG to completely resolve boot connection issues discussed here: https://github.com/ckb-next/ckb-next/issues/42. Otherwise roughly 1 in 10 boots the keyboard will fail to be detected. Patch that applied delay control quirk for Corsair Strafe RGB: cb88a0588717 ("usb: quirks: add control message delay for 1b1c:1b20") Previous K70 RGB patch to add delay-init quirk: 7a1646d92257 ("Add delay-init quirk for Corsair K70 RGB keyboards") Signed-off-by: Jack Stocker <jackstocker.93@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-07usbcore: Select only first configuration for non-UAC3 compliant devicesSaranya Gopal
In most of the UAC1 and UAC2 audio devices, the first configuration is most often the best configuration. However, with recent patch to support UAC3 configuration, second configuration was unintentionally chosen for some of the UAC1/2 devices that had more than one configuration. This was because of the existing check after the audio config check which selected any config which had a non-vendor class. This patch fixes this issue. Fixes: f13912d3f014 ("usbcore: Select UAC3 configuration for audio if present") Reported-by: Con Kolivas <kernel@kolivas.org> Signed-off-by: Saranya Gopal <saranya.gopal@intel.com> Tested-by: Con Kolivas <kernel@kolivas.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-07USB: storage: add quirk for SMI SM3350Icenowy Zheng
The SMI SM3350 USB-UFS bridge controller cannot handle long sense request correctly and will make the chip refuse to do read/write when requested long sense. Add a bad sense quirk for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-07USB: storage: don't insert sane sense for SPC3+ when bad sense specifiedIcenowy Zheng
Currently the code will set US_FL_SANE_SENSE flag unconditionally if device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to prevent this behavior, because SMI SM3350 UFS-USB bridge controller, which claims SPC4, will show strange behavior with 96-byte sense (put the chip into a wrong state that cannot read/write anything). Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE on SPC4+ devices. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-07usb: cdc-acm: send ZLP for Telit 3G Intel based modemsDaniele Palmas
Telit 3G Intel based modems require zero packet to be sent if out data size is equal to the endpoint max packet size. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-07riscv: add HAVE_SYSCALL_TRACEPOINTS to KconfigDavid Abdurachmanov
I looked into Documentation/trace/ftrace-design.rst and, I think, we check all the boxes needed for HAVE_SYSCALL_TRACEPOINTS. Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-07riscv: fix trace_sys_exit hookDavid Abdurachmanov
Fix compilation error. Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-07riscv: define CREATE_TRACE_POINTS in ptrace.cDavid Abdurachmanov
Define CREATE_TRACE_POINTS in order to create functions and structures for the trace events. This is needed if HAVE_SYSCALL_TRACEPOINTS and CONFIG_FTRACE_SYSCALLS are enabled, otherwise we get linking errors: [..] MODPOST vmlinux.o kernel/trace/trace_syscalls.o: In function `.L0 ': trace_syscalls.c:(.text+0x1152): undefined reference to `__tracepoint_sys_enter' trace_syscalls.c:(.text+0x126c): undefined reference to `__tracepoint_sys_enter' trace_syscalls.c:(.text+0x1328): undefined reference to `__tracepoint_sys_enter' trace_syscalls.c:(.text+0x14aa): undefined reference to `__tracepoint_sys_enter' trace_syscalls.c:(.text+0x1684): undefined reference to `__tracepoint_sys_exit' trace_syscalls.c:(.text+0x17a0): undefined reference to `__tracepoint_sys_exit' trace_syscalls.c:(.text+0x185c): undefined reference to `__tracepoint_sys_exit' trace_syscalls.c:(.text+0x19de): undefined reference to `__tracepoint_sys_exit' arch/riscv/kernel/ptrace.o: In function `.L0 ': ptrace.c:(.text+0x4dc): undefined reference to `__tracepoint_sys_enter' ptrace.c:(.text+0x632): undefined reference to `__tracepoint_sys_exit' make: *** [Makefile:1036: vmlinux] Error 1 Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Fixes: b78002b395b4 ("riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig") Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-07riscv: define NR_syscalls in unistd.hDavid Abdurachmanov
This macro is used by kernel/trace/{trace.h,trace_syscalls.c} if we have CONFIG_FTRACE_SYSCALLS enabled. Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Fixes: b78002b395b4 ("riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig") Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-07riscv: audit: add audit hook in do_syscall_trace_enter/exit()David Abdurachmanov
This patch adds auditing functions on entry to and exit from every system call invocation. Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-07riscv: add audit supportDavid Abdurachmanov
On RISC-V (riscv) audit is supported through generic lib/audit.c. The patch adds required arch specific definitions. Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-07RISC-V: Support MODULE_SECTIONS mechanism on RV32Zong Li
This patch supports dynamic generate got and plt sections mechanism on rv32. It contains the modification as follows: - Always enable MODULE_SECTIONS (both rv64 and rv32) - Change the fixed size type. This patch had been tested by following modules: btrfs 6795991 0 - Live 0xa544b000 test_static_keys 17304 0 - Live 0xa28be000 zstd_compress 1198986 1 btrfs, Live 0xa2a25000 zstd_decompress 608112 1 btrfs, Live 0xa24e7000 lzo 8787 0 - Live 0xa2049000 xor 27461 1 btrfs, Live 0xa2041000 zram 78849 0 - Live 0xa2276000 netdevsim 55909 0 - Live 0xa202d000 tun 211534 0 - Live 0xa21b5000 fuse 566049 0 - Live 0xa25fb000 nfs_layout_flexfiles 192597 0 - Live 0xa229b000 ramoops 74895 0 - Live 0xa2019000 xfs 3973221 0 - Live 0xa507f000 libcrc32c 3053 2 btrfs,xfs, Live 0xa34af000 lzo_compress 17302 2 btrfs,lzo, Live 0xa347d000 lzo_decompress 7178 2 btrfs,lzo, Live 0xa3451000 raid6_pq 142086 1 btrfs, Live 0xa33a4000 reed_solomon 31022 1 ramoops, Live 0xa31eb000 test_bitmap 3734 0 - Live 0xa31af000 test_bpf 1588736 0 - Live 0xa2c11000 test_kmod 41161 0 - Live 0xa29f8000 test_module 1356 0 - Live 0xa299e000 test_printf 6024 0 [permanent], Live 0xa2971000 test_static_key_base 5797 1 test_static_keys, Live 0xa2931000 test_user_copy 4382 0 - Live 0xa28c9000 xxhash 70501 2 zstd_compress,zstd_decompress, Live 0xa2055000 Signed-off-by: Zong Li <zong@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-07MAINTAINERS: SiFive drivers: add myself as a SiFive driver maintainerPaul Walmsley
I'll be helping Palmer review drivers for SiFive-specific IP blocks, so add myself to the MAINTAINERS file. Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: linux-kernel@vger.kernel.org Cc: linux-riscv@lists.infradead.org Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-07MAINTAINERS: SiFive drivers: change the git tree to a SiFive git treePaul Walmsley
Update the git tree URL for drivers for SiFive-related IP blocks to point to a SiFive-managed URL. Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: linux-kernel@vger.kernel.org Cc: linux-riscv@lists.infradead.org Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-07riscv: don't stop itself in smp_send_stopAndreas Schwab
Add IPI_CPU_STOP message and use it in smp_send_stop to stop other cpus, but not itself. Mark cpu offline on reception of IPI_CPU_STOP. Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-07arch: riscv: support kernel command line forcing when no DTB passedPaul Walmsley
CONFIG_CMDLINE_FORCE doesn't work on RISC-V when no DTB is passed into the kernel. This is because the code that forces the kernel command line only runs if a valid DTB is present at boot. During debugging, it's useful to have the ability to force kernel command lines even when no DTB is present. This patch adds support for doing so. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: linux-riscv@lists.infradead.org Cc: linux-kernel@vger.kernel.org (open list) Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-07tools uapi: fix RISC-V 64-bit supportAurelien Jarno
The BPF library is not built on 64-bit RISC-V, as the BPF feature is not detected. Looking more in details, feature/test-bpf.c fails to build with the following error: | In file included from /tmp/linux-4.19.12/tools/include/uapi/asm/bitsperlong.h:17, | from /tmp/linux-4.19.12/tools/include/uapi/asm-generic/unistd.h:2, | from /usr/include/riscv64-linux-gnu/asm/unistd.h:1, | from test-bpf.c:2: | /tmp/linux-4.19.12/tools/include/asm-generic/bitsperlong.h:14:2: error: #error Inconsistent word size. Check asm/bitsperlong.h | #error Inconsistent word size. Check asm/bitsperlong.h | ^~~~~ The UAPI from the tools directory is missing RISC-V support, therefore bitsperlong.h from asm-generic is used, defaulting to 32 bits. Fix that by adding tools/arch/riscv/include/uapi/asm/bitsperlong.h as a copy of arch/riscv/include/uapi/asm/bitsperlong.h and by updating tools/include/uapi/asm/bitsperlong.h. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-07RISC-V: Make BSS section as the last section in vmlinux.lds.SAnup Patel
The objcopy only emits loadable sections when creating flat kernel Image. To have minimal possible size of flat kernel Image, we should have all non-loadable sections after loadable sections. Currently, execption table section (loadable section) is after BSS section (non-loadable section) in the RISC-V vmlinux.lds.S. This is not optimal for having minimal flat kernel Image size hence this patch makes BSS section as the last section in RISC-V vmlinux.lds.S. In addition, we make BSS section aligned to 16byte instead of PAGE aligned which further reduces flat kernel Image size by few KBs. The flat kernel Image size of Linux-4.20-rc4 using GCC 8.2.0 is 8819980 bytes with current RISC-V vmlinux.lds.S and it reduces to 7991740 bytes with this patch applied. In summary, this patch reduces Linux-4.20-rc4 flat kernel Image size by 809 KB. Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-07reset: uniphier-glue: Add AHCI reset control support in glue layerKunihiko Hayashi
Add a reset line included in AHCI glue layer to enable AHCI core implemented in UniPhier SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07dt-bindings: reset: uniphier: Add AHCI core reset descriptionKunihiko Hayashi
Add compatible strings for reset control of AHCI core implemented in UniPhier SoCs. The reset control belongs to AHCI glue layer. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07reset: uniphier-usb3: Rename to reset-uniphier-glueKunihiko Hayashi
This driver works for controlling the reset lines including USB3 glue layer, however, this can be applied to other glue layers. Now this patch renames the driver from "reset-uniphier-usb3" to "reset-uniphier-glue". At the same time, this changes CONFIG_RESET_UNIPHIER_USB3 to CONFIG_RESET_UNIPHIER_GLUE. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07dt-bindings: reset: uniphier: Replace the expression of USB3 with generic ↵Kunihiko Hayashi
peripherals Replace the expression of "USB3 glue layer" with the glue layer of the generic peripherals to allow other devices to use it. The reset control belongs to this glue layer. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07ARM: socfpga: dts: document "altr,stratix10-rst-mgr" bindingDinh Nguyen
"altr,stratix10-rst-mgr" is used for the Stratix10 reset manager. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07reset: socfpga: add an early reset driver for SoCFPGADinh Nguyen
Create a separate reset driver that uses the reset operations in reset-simple. The reset driver for the SoCFPGA platform needs to register early in order to be able bring online timers that needed early in the kernel bootup. We do not need this early reset driver for Stratix10, because on arm64, Linux does not need the timers are that in reset. Linux is able to run just fine with the internal armv8 timer. Thus, we use a new binding "altr,stratix10-rst-mgr" for the Stratix10 platform. The Stratix10 platform will continue to use the reset-simple platform driver, while the 32-bit platforms(Cyclone5/Arria5/Arria10) will use the early reset driver. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [p.zabel@pengutronix.de: fixed socfpga of_device_id in reset-simple] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07reset: fix null pointer dereference on dev by dev_nameColin Ian King
The call to dev_name will dereference dev, however, dev is later being null checked, so there is a possibility of a null pointer dereference on dev by the call to dev_name. Fix this by null checking dev first before the call to dev_name Detected by CoverityScan, CID#1475475 ("Dereference before null check") Fixes: 2a6cb2b1d83b ("reset: Add reset_control_get_count()") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07reset: Add reset_control_get_count()Geert Uytterhoeven
Currently the reset core has internal support for counting the number of resets for a device described in DT. Generalize this to devices using lookup resets, and export it for public use. This will be used by generic drivers that need to be sure a device is controlled by a single, dedicated reset line (e.g. vfio-platform). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> [p.zabel@pengutronix.de: fixed a typo in reset_control_get_count comment] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07reset: Improve reset controller kernel docsGeert Uytterhoeven
Grammar and indentation fixes. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> [p.zabel@pengutronix.de: dropped "shared among" -> "shared between"] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07ARC: HSDK: improve reset driverEugeniy Paltsev
As for today HSDK reset driver implements only .reset() callback. In case of driver which implements one of standard reset controller usage pattern (call *_deassert() in probe(), call *_assert() in remove()) that leads to inoperability of this reset driver. Improve HSDK reset driver by calling .reset() callback inside of .deassert() callback to avoid each reset controller user adaptation for work with both reset methods (reset() and {.assert() & .deassert()} pair) Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07rds: use DIV_ROUND_UP instead of ceilJacob Wen
Yes indeed, DIV_ROUND_UP is in kernel.h. Signed-off-by: Jacob Wen <jian.w.wen@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-07r8169: don't try to read counters if chip is in a PCI power-save stateHeiner Kallweit
Avoid log spam caused by trying to read counters from the chip whilst it is in a PCI power-save state. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=107421 Fixes: 1ef7286e7f36 ("r8169: Dereference MMIO address immediately before use") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-07staging: rtl8188eu: Fix module loading from tasklet for WEP encryptionLarry Finger
Commit 2b2ea09e74a5 ("staging:r8188eu: Use lib80211 to decrypt WEP-frames") causes scheduling while atomic bugs followed by a hard freeze whenever the driver tries to connect to a WEP-encrypted network. Experimentation showed that the freezes were eliminated when module lib80211 was preloaded, which can be forced by calling lib80211_get_crypto_ops() directly rather than indirectly through try_then_request_module(). With this change, no BUG messages are logged. Fixes: 2b2ea09e74a5 ("staging:r8188eu: Use lib80211 to decrypt WEP-frames") Cc: Stable <stable@vger.kernel.org> # v4.17+ Cc: Michael Straube <straube.linux@gmail.com> Cc: Ivan Safonov <insafonov@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-07staging: rtl8188eu: Fix module loading from tasklet for CCMP encryptionLarry Finger
Commit 6bd082af7e36 ("staging:r8188eu: use lib80211 CCMP decrypt") causes scheduling while atomic bugs followed by a hard freeze whenever the driver tries to connect to a CCMP-encrypted network. Experimentation showed that the freezes were eliminated when module lib80211 was preloaded, which can be forced by calling lib80211_get_crypto_ops() directly rather than indirectly through try_then_request_module(). With this change, no BUG messages are logged. Fixes: 6bd082af7e36 ("staging:r8188eu: use lib80211 CCMP decrypt") Cc: Stable <stable@vger.kernel.org> # v4.17+ Reported-and-tested-by: Michael Straube <straube.linux@gmail.com> Cc: Ivan Safonov <insafonov@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-07Documentation/features: Add csky kernel featuresGuo Ren
core/ cBPF-JIT : TODO | core/ eBPF-JIT : TODO | core/ generic-idle-thread : ok | core/ jump-labels : TODO | core/ tracehook : ok | debug/ KASAN : TODO | debug/ gcov-profile-all : TODO | debug/ kgdb : TODO | debug/ kprobes-on-ftrace : TODO | debug/ kprobes : TODO | debug/ kretprobes : TODO | debug/ optprobes : TODO | debug/ stackprotector : TODO | debug/ uprobes : TODO | debug/ user-ret-profiler : TODO | io/ dma-contiguous : ok | locking/ cmpxchg-local : TODO | locking/ lockdep : TODO | locking/ queued-rwlocks : ok | locking/ queued-spinlocks : TODO | locking/ rwsem-optimized : TODO | perf/ kprobes-event : TODO | perf/ perf-regs : TODO | perf/ perf-stackdump : TODO | sched/ membarrier-sync-core : TODO | sched/ numa-balancing : .. | seccomp/ seccomp-filter : TODO | time/ arch-tick-broadcast : TODO | time/ clockevents : ok | time/ context-tracking : TODO | time/ irq-time-acct : TODO | time/ modern-timekeeping : ok | time/ virt-cpuacct : TODO | vm/ ELF-ASLR : TODO | vm/ PG_uncached : TODO | vm/ THP : .. | vm/ batch-unmap-tlb-flush: TODO | vm/ huge-vmap : TODO | vm/ ioremap_prot : TODO | vm/ numa-memblock : .. | vm/ pte_special : TODO | Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
generated by cgit (git 2.34.1) at 2025-09-12 19:24:06 +0000