summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-02-21platform: x86: tc1100-wmi: world-writable sysfs wireless and jogdial filesVasiliy Kulikov
Don't allow everybody to change WMI settings. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-02-21platform-drivers: x86: pmic: Use request_irq instead of chained handlerThomas Gleixner
There is no need to install a chained handler for this hardware. This is a plain x86 IOAPIC interrupt which is handled by the core code perfectly fine. There is nothing special about demultiplexing these gpio interrupts which justifies a custom hack. Replace it by a plain old interrupt handler installed with request_irq. That makes the code agnostic about the underlying primary interrupt hardware. The overhead for this is minimal, but it gives us the advantage of accounting, balancing and to detect interrupt storms. gpio interrupts are not really that performance critical. Patch fixups from akpm Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2011-02-21cifs: Fix regression in LANMAN (LM) auth codeShirish Pargaonkar
LANMAN response length was changed to 16 bytes instead of 24 bytes. Revert it back to 24 bytes. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> CC: stable@kernel.org Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-02-21eCryptfs: Copy up lower inode attrs in getattrTyler Hicks
The lower filesystem may do some type of inode revalidation during a getattr call. eCryptfs should take advantage of that by copying the lower inode attributes to the eCryptfs inode after a call to vfs_getattr() on the lower inode. I originally wrote this fix while working on eCryptfs on nfsv3 support, but discovered it also fixed an eCryptfs on ext4 nanosecond timestamp bug that was reported. https://bugs.launchpad.net/bugs/613873 Cc: <stable@kernel.org> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2011-02-21ecryptfs: read on a directory should return EISDIR if not supportedAndy Whitcroft
read() calls against a file descriptor connected to a directory are incorrectly returning EINVAL rather than EISDIR: [EISDIR] [XSI] [Option Start] The fildes argument refers to a directory and the implementation does not allow the directory to be read using read() or pread(). The readdir() function should be used instead. [Option End] This occurs because we do not have a .read operation defined for ecryptfs directories. Connect this up to generic_read_dir(). BugLink: http://bugs.launchpad.net/bugs/719691 Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2011-02-21eCryptfs: Handle NULL nameidata pointersTyler Hicks
Allow for NULL nameidata pointers in eCryptfs create, lookup, and d_revalidate functions. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2011-02-21ARM: 6745/1: kprobes insn decoding fixNicolas Pitre
Marcin Slusarz says: > In arch/arm/kernel/kprobes-decode.c there's a function > arm_kprobe_decode_insn which does: > > } else if ((insn & 0x0e000000) == 0x0c400000) { > ... > > This is always false, so code below is dead. > I found this bug by coccinelle (http://coccinelle.lip6.fr/). Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: tlb: move noMMU tlb_flush() to asm/tlb.hRussell King
There's no need to noMMU to put tlb_flush() in asm/tlbflush.h - it's part of the tlb shootdown interface. Move it to asm/tlb.h instead, as per x86. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: tlb: delay page freeing for SMP and ARMv7 CPUsRussell King
We need to delay freeing any mapped page on SMP and ARMv7 systems to ensure that the data is not accessed by other CPUs, or is used for speculative prefetch with ARMv7. This includes not only mapped pages but also pages used for the page tables themselves. This avoids races with the MMU/other CPUs accessing pages after they've been freed but before we've invalidated the TLB. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: Keep exit text/data around for SMP_ON_UPRussell King
When SMP_ON_UP is used and the spinlocks are inlined, we end up with inline spinlocks in the exit code, with references from the SMP alternatives section to the exit sections. This causes link time errors. Avoid this by placing the exit sections in the init-discarded region. Cc: <stable@kernel.org> Tested-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: Ensure predictable endian state on signal handler entryRussell King
Ensure a predictable endian state when entering signal handlers. This avoids programs which use SETEND to momentarily switch their endian state from having their signal handlers entered with an unpredictable endian state. Cc: <stable@kernel.org> Acked-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: 6740/1: Place correctly notes section in the linker scriptPawel Moll
Commit 18991197b4b588255ccabf472ebc84db7b66a19c added --build-id linker option when toolchain supports it. ARM one does, but for some reason places the section at 0 when linker script doesn't mention it explicitly. The 1e621a8e3752367d4aae78a8ab00a18fb2793f34 worked around the problem removing this section from binary image with explicit objcopy options, but it still exists in vmlinux, confusing tools like debuggers and perf. This problem was discussed here: http://lists.infradead.org/pipermail/linux-arm-kernel/2010-May/015994.html http://lists.infradead.org/pipermail/linux-arm-kernel/2010-May/015994.html but the proposed changes to the linker script were substantial. This patch simply places NOTES (36 bytes long, at least when compiled with CodeSourcery toolchain) between data and bss, which seem to be the right place (and suggested by the sample linker script in include/asm-generic/vmlinux.lds.h). It is enough to place it correctly in vmlinux (so debuggers are happy): Section Headers: [11] .data PROGBITS c07ce000 7ce000 020fc0 00 WA 0 0 32 [12] .notes NOTE c07eefc0 7eefc0 000024 00 AX 0 0 4 [13] .bss NOBITS c07ef000 7eefe4 01e628 00 WA 0 0 32 Program Headers: LOAD 0x008000 0xc0008000 0xc0008000 0x7e6fe4 0x805628 RWE 0x8000 NOTE 0x7eefc0 0xc07eefc0 0xc07eefc0 0x00024 0x00024 R E 0x4 Section to Segment mapping: Segment Sections... 00 <...> .data .notes .bss 01 .notes and to get it exposed as /sys/kernel/notes used by perf tools. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: 6700/1: SPEAr: Correct SOC config base address for spear320viresh kumar
SPEAR320_SOC_CONFIG_BASE was wrong, causing the wrong registers to be accessed. Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: 6722/1: SPEAr: sp810: switch to slow mode before resetShiraz Hashim
In sysctl_soft_reset(), switch to slow mode before resetting the system via the system controller. This is required. Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: 6712/1: SPEAr: replace readl(), writel() with relaxed versions in ↵viresh kumar
uncompress.h readl() and writel() calls the outer cache maintainance operations which are not available during Linux uncompression. This patch replaces readl() and writel() with readl_relaxed() and writel_relaxed() to avoid the link time errors. Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: 6720/1: SPEAr: Append UL to VMALLOC_ENDviresh kumar
This patch fixes following warning: arch/arm/mm/init.c:606: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int' by appending UL to VMALLOC_END's Number. Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21fixdep: Do not record dependency on the source file itselfMichal Marek
The dependency is already expressed by the Makefiles, storing it in the .cmd file breaks build if a .c file is replaced by .S or vice versa, because the .cmd file contains foo/bar.o: foo/bar.c ... foo/bar.c ... : so the foo/bar.c -> foo/bar.o rule triggers even if there is no foo/bar.c anymore. Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-02-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: HDA: Do not announce false surround in Conexant auto ALSA: HDA: Conexant auto: Handle multiple connections to ADC node ALSA: HDA: Add position_fix quirk for an Asus device ALSA: caiaq - Fix possible string-buffer overflow ALSA: au88x0 - Modify pointer callback to give accurate playback position
2011-02-20Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (lm85) extend to support EMC6D103 chips MAINTAINERS: Remove stale hwmon quilt tree hwmon: (k10temp) add support for AMD Family 12h/14h CPUs hwmon: (jc42) do not allow writing to locked registers hwmon: (jc42) more helpful documentation hwmon: (jc42) fix type mismatch
2011-02-20Revert "tpm_tis: Use timeouts returned from TPM"Linus Torvalds
This reverts commit 9b29050f8f75916f974a2d231ae5d3cd59792296. It has caused hibernate regressions, for example Juri Sladby's report: "I'm unable to hibernate 2.6.37.1 unless I rmmod tpm_tis: [10974.074587] Suspending console(s) (use no_console_suspend to debug) [10974.103073] tpm_tis 00:0c: Operation Timed out [10974.103089] legacy_suspend(): pnp_bus_suspend+0x0/0xa0 returns -62 [10974.103095] PM: Device 00:0c failed to freeze: error -62" and Rafael points out that some of the new conditionals in that commit seem to make no sense. This commit needs more work and testing, let's revert it for now. Reported-by: Norbert Preining <preining@logic.at> Reported-and-requested-by: Jiri Slaby <jirislaby@gmail.com> Cc: Stefan Berger <stefanb@linux.vnet.ibm.com> Cc: Guillaume Chazarain <guichaz@gmail.com> Cc: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-20pcmcia: re-enable Zoomed Video supportDominik Brodowski
Allow drivers to enable Zoomed Video support. Currently, this is only used by out-of-tree drivers (L64020 DVB driver in particular). CC: <stable@kernel.org> [for 2.6.37] Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-02-19ceph: keep reference to parent inode on ceph_dentryYehuda Sadeh
When creating a new dentry we now hold a reference to the parent inode in the ceph_dentry. This is required due to the new RCU changes from 949854d0, which set dentry->d_parent to NULL in d_kill before calling the ->release() callback. If/when that behavior is changed, we can revert this hack. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-02-19ALSA: HDA: Do not announce false surround in Conexant autoDavid Henningsson
Without this patch, one line-out and one speaker and Conexant's auto parser would announce (non-working) surround capabilities. BugLink: http://bugs.launchpad.net/bugs/721126 Cc: stable@kernel.org Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-19ALSA: HDA: Conexant auto: Handle multiple connections to ADC nodeDavid Henningsson
Conexant 20641 has several inputs to its ADC node, with one selector and individual amps for all inputs. This patch adds support in the Conexant auto parser to handle that case. It also means that the pin node's volume is being renamed to "Boost" to avoid name clash with the new volume controls on the ADC node. BugLink: http://bugs.launchpad.net/bugs/719524 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-19ARM: 6676/1: Correct the cpu_architecture() function for ARMv7Catalin Marinas
If ID_MMFR0[3:0] >= 3, the architecture version is ARMv7. The code was currently only testing for ID_MMFR0[3:0] == 3. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19ARM: 6739/1: update .gitignore for boot/compressedNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19ARM: 6743/1: errata: interrupted ICALLUIS may prevent completion of ↵Will Deacon
broadcasted operation On versions of the Cortex-A9 prior to r3p0, an interrupted ICIALLUIS operation may prevent the completion of a following broadcasted operation if the second operation is received by a CPU before the ICIALLUIS has completed, potentially leading to corrupted entries in the cache or TLB. This workaround sets a bit in the diagnostic register of the Cortex-A9, causing CP15 maintenance operations to be uninterruptible. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19ARM: 6742/1: pmu: avoid setting IRQ affinity on UP systemsWill Deacon
Now that we can execute a CONFIG_SMP kernel on a uniprocessor system, extra care has to be taken in the PMU IRQ affinity setting code to ensure that we don't always fail to initialise. This patch changes the CPU PMU initialisation code so that when we only have a single IRQ, whose affinity can not be changed at the controller, we report success (0) rather than -EINVAL. Reported-by: Avik Sil <avik.sil@linaro.org> Acked-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19ARM: 6741/1: errata: pl310 cache sync operation may be faultySrinidhi Kasagar
The effect of cache sync operation is to drain the store buffer and wait for all internal buffers to be empty. In normal conditions, store buffer is able to merge the normal memory writes within its 32-byte data buffers. Due to this erratum present in r3p0, the effect of cache sync operation on the store buffer still remains when the operation completes. This means that the store buffer is always asked to drain and this prevents it from merging any further writes. This can severely affect performance on the write traffic esp. on Normal memory NC one. The proposed workaround is to replace the normal offset of cache sync operation(0x730) by another offset targeting an unmapped PL310 register 0x740. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19cm4000_cs: Fix undefined ops warningAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-02-19pcmcia vs. MECR on pxa25x/sa1111Pavel Machek
After 2.6.34 changes, __pxa2xx_drv_pcmcia_probe() was replaced by sa1111_pcmcia_add(). That unfortunately means that configure_sockets() is not called, leading to MECR not being set properly, leading to strange crashes. Tested on pxa255+sa1111, I do not have lubbock board nearby. Perhaps cleaner solution exists? Signed-off-by: Pavel Machek <pma@sysgo.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-02-19drivers/char/pcmcia/ipwireless/main.c: Convert release_resource to ↵Julia Lawall
release_region/release_mem_region Request_region should be used with release_region, not release_resource. This patch contains a number of changes, related to calls to request_region, request_mem_region, and the associated error handling code. 1. For the call to request_region, the variable io_resource storing the result is dropped. The call to release_resource at the end of the function is changed to a call to release_region with the first two arguments of request_region as its arguments. The same call to release_region is also added to release_ipwireless. 2. The first call to request_mem_region is now tested and ret is set to -EBUSY if the the call has failed. This call was associated with the initialization of ipw->attr_memory. But the error handling code was testing ipw->common_memory. The definition of release_ipwireless also suggests that this call should be associated with ipw->common_memory, not ipw->attr_memory. 3. The second call to request_mem_region is now tested and ret is set to -EBUSY if the the call has failed. 4. The various gotos to the error handling code is adjusted so that there is no need for ifs. 5. Return the value stored in the ret variable rather than -1. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,E; @@ ( *x = request_region(...) | *x = request_mem_region(...) ) ... when != release_region(x) when != x = E * release_resource(x); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-02-19genirq: Disable the SHIRQ_DEBUG call in request_threaded_irq for nowThomas Gleixner
With CONFIG_SHIRQ_DEBUG=y we call a newly installed interrupt handler in request_threaded_irq(). The original implementation (commit a304e1b8) called the handler _BEFORE_ it was installed, but that caused problems with handlers calling disable_irq_nosync(). See commit 377bf1e4. It's braindead in the first place to call disable_irq_nosync in shared handlers, but .... Moving this call after we installed the handler looks innocent, but it is very subtle broken on SMP. Interrupt handlers rely on the fact, that the irq core prevents reentrancy. Now this debug call violates that promise because we run the handler w/o the IRQ_INPROGRESS protection - which we cannot apply here because that would result in a possibly forever masked interrupt line. A concurrent real hardware interrupt on a different CPU results in handler reentrancy and can lead to complete wreckage, which was unfortunately observed in reality and took a fricking long time to debug. Leave the code here for now. We want this debug feature, but that's not easy to fix. We really should get rid of those disable_irq_nosync() abusers and remove that function completely. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Arjan van de Ven <arjan@infradead.org> Cc: stable@kernel.org # .28 -> .37
2011-02-19genirq: Prevent access beyond allocated_irqs bitmapThomas Gleixner
Lars-Peter Clausen pointed out: I stumbled upon this while looking through the existing archs using SPARSE_IRQ. Even with SPARSE_IRQ the NR_IRQS is still the upper limit for the number of IRQs. Both PXA and MMP set NR_IRQS to IRQ_BOARD_START, with IRQ_BOARD_START being the number of IRQs used by the core. In various machine files the nr_irqs field of the ARM machine defintion struct is then set to "IRQ_BOARD_START + NR_BOARD_IRQS". As a result "nr_irqs" will greater then NR_IRQS which then again causes the "allocated_irqs" bitmap in the core irq code to be accessed beyond its size overwriting unrelated data. The core code really misses a sanity check there. This went unnoticed so far as by chance the compiler/linker places data behind that bitmap which gets initialized later on those affected platforms. So the obvious fix would be to add a sanity check in early_irq_init() and break all affected platforms. Though that check wants to be backported to stable as well, which will require to fix all known problematic platforms and probably some more yet not known ones as well. Lots of churn. A way simpler solution is to allocate a slightly larger bitmap and avoid the whole churn w/o breaking anything. Add a few warnings when an arch returns utter crap. Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org # .37 Cc: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org>
2011-02-18MAINTAINERS: email address changeDaniel Walker
Change my email address to my main account. Signed-off-by: Daniel Walker <dwalker@codeaurora.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-18hwmon: (lm85) extend to support EMC6D103 chipsJan Beulich
The interface is identical EMC6D102, so all that needs to be added are some definitions and their uses. Registers apparently missing in EMC6D103S/EMC6D103:A2 compared to EMC6D103:A0, EMC6D103:A1, and EMC6D102 (according to the data sheets), but used unconditionally in the driver: 62[5:7], 6D[0:7], and 6E[0:7]. For that reason, EMC6D103S chips don't get enabled for the time being. Signed-off-by: Jan Beulich <jbeulich@novell.com> (Guenter Roeck: Replaced EMC6D103_A2 with EMC6D103S per EMC6D103S datasheet) Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@kernel.org
2011-02-18Merge branch 'rtc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'rtc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: RTC: Re-enable UIE timer/polling emulation RTC: Revert UIE emulation removal RTC: Release mutex in error path of rtc_alarm_irq_enable
2011-02-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits) net: deinit automatic LIST_HEAD net: dont leave active on stack LIST_HEAD net: provide default_advmss() methods to blackhole dst_ops tg3: Restrict phy ioctl access drivers/net: Call netif_carrier_off at the end of the probe ixgbe: work around for DDP last buffer size ixgbe: fix panic due to uninitialised pointer e1000e: flush all writebacks before unload e1000e: check down flag in tasks isdn: hisax: Use l2headersize() instead of dup (and buggy) func. arp_notify: unconditionally send gratuitous ARP for NETDEV_NOTIFY_PEERS. cxgb4vf: Use defined Mailbox Timeout cxgb4vf: Quiesce Virtual Interfaces on shutdown ... cxgb4vf: Behave properly when CONFIG_DEBUG_FS isn't defined ... cxgb4vf: Check driver parameters in the right place ... pch_gbe: Fix the MAC Address load issue. iwlwifi: Delete iwl3945_good_plcp_health. net/can/softing: make CAN_SOFTING_CS depend on CAN_SOFTING netfilter: nf_iterate: fix incorrect RCU usage pch_gbe: Fix the issue that the receiving data is not normal. ...
2011-02-18Merge branch 'for-linus/bugfixes' of git://xenbits.xen.org/people/ianc/linux-2.6Linus Torvalds
* 'for-linus/bugfixes' of git://xenbits.xen.org/people/ianc/linux-2.6: xen: suspend and resume system devices when running PVHVM
2011-02-18Merge branch 'fixes-2.6.38' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq * 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: make sure MAYDAY_INITIAL_TIMEOUT is at least 2 jiffies long workqueue, freezer: unify spelling of 'freeze' + 'able' to 'freezable' workqueue: wake up a worker when a rescuer is leaving a gcwq
2011-02-18net: deinit automatic LIST_HEADEric Dumazet
commit 9b5e383c11b08784 (net: Introduce unregister_netdevice_many()) left an active LIST_HEAD() in rollback_registered(), with possible memory corruption. Even if device is freed without touching its unreg_list (and therefore touching the previous memory location holding LISTE_HEAD(single), better close the bug for good, since its really subtle. (Same fix for default_device_exit_batch() for completeness) Reported-by: Michal Hocko <mhocko@suse.cz> Tested-by: Michal Hocko <mhocko@suse.cz> Reported-by: Eric W. Biderman <ebiderman@xmission.com> Tested-by: Eric W. Biderman <ebiderman@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Ingo Molnar <mingo@elte.hu> CC: Octavian Purdila <opurdila@ixiacom.com> CC: stable <stable@kernel.org> [.33+] Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18net: dont leave active on stack LIST_HEADLinus Torvalds
Eric W. Biderman and Michal Hocko reported various memory corruptions that we suspected to be related to a LIST head located on stack, that was manipulated after thread left function frame (and eventually exited, so its stack was freed and reused). Eric Dumazet suggested the problem was probably coming from commit 443457242beb (net: factorize sync-rcu call in unregister_netdevice_many) This patch fixes __dev_close() and dev_close() to properly deinit their respective LIST_HEAD(single) before exiting. References: https://lkml.org/lkml/2011/2/16/304 References: https://lkml.org/lkml/2011/2/14/223 Reported-by: Michal Hocko <mhocko@suse.cz> Tested-by: Michal Hocko <mhocko@suse.cz> Reported-by: Eric W. Biderman <ebiderman@xmission.com> Tested-by: Eric W. Biderman <ebiderman@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Ingo Molnar <mingo@elte.hu> CC: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18net: provide default_advmss() methods to blackhole dst_opsEric Dumazet
Commit 0dbaee3b37e118a (net: Abstract default ADVMSS behind an accessor.) introduced a possible crash in tcp_connect_init(), when dst->default_advmss() is called from dst_metric_advmss() Reported-by: George Spelvin <linux@horizon.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18Expand CONFIG_DEBUG_LIST to several other list operationsLinus Torvalds
When list debugging is enabled, we aim to readably show list corruption errors, and the basic list_add/list_del operations end up having extra debugging code in them to do some basic validation of the list entries. However, "list_del_init()" and "list_move[_tail]()" ended up avoiding the debug code due to how they were written. This fixes that. So the _next_ time we have list_move() problems with stale list entries, we'll hopefully have an easier time finding them.. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-18Input: tegra-kbc - add function keymapRakesh Iyer
Add Fn keymap support to allow for internal processing of Fn keys. Signed-off-by: Rakesh Iyer <riyer@nvidia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-18MAINTAINERS: Remove stale hwmon quilt treeGuenter Roeck
ftp://pub.kernel.org/pub/linux/kernel/people/groeck/linux-staging/ is not kept up to date, so remove reference to it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-18hwmon: (k10temp) add support for AMD Family 12h/14h CPUsClemens Ladisch
Add the PCI ID to support the internal temperature sensor of the AMD "Llano" and "Brazos" processor families. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: stable@kernel.org # ca86828: x86, AMD, PCI: Add AMD northbridge PCI device Cc: stable@kernel.org Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-18ARM: S5PV210: Fix regulator namesMarek Szyprowski
Since commit 1130e5b3ff4 regulators are exported to debugfs. The names of the regulators that contains slash ('/') causes an ops during kernel boot. This patch fixes this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-18ARM: S5PV210: Update max8998_platform_dataMarek Szyprowski
Max8998 PMIC driver's platform data has been changed once again in commit 735a3d9efdc. This patch fixes build break caused by that commit. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-18ARM: SAMSUNG: Drop exporting s3c24xx_ts_set_platdataAxel Lin
s3c24xx_ts_set_platdata is annotated __init and not used by any module, thus don't export it. This patch fixes below warning: WARNING: arch/arm/plat-samsung/built-in.o(__ksymtab+0x90): Section mismatch in reference from the variable __ksymtab_s3c24xx_ts_set_platdata to the function .init.text:s3c24xx_ts_set_platdata() The symbol s3c24xx_ts_set_platdata is exported and annotated __init Fix this by removing the __init annotation of s3c24xx_ts_set_platdata or drop the export. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit (git 2.34.1) at 2025-09-11 11:38:39 +0000