summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-06-17block: update hctx map when use multiple mapsWeiping Zhang
There is an issue when tune the number for read and write queues, if the total queue count was not changed. The hctx->type cannot be updated, since __blk_mq_update_nr_hw_queues will return directly if the total queue count has not been changed. Reproduce: dmesg | grep "default/read/poll" [ 2.607459] nvme nvme0: 48/0/0 default/read/poll queues cat /sys/kernel/debug/block/nvme0n1/hctx*/type | sort | uniq -c 48 default tune the write queues to 24: echo 24 > /sys/module/nvme/parameters/write_queues echo 1 > /sys/block/nvme0n1/device/reset_controller dmesg | grep "default/read/poll" [ 433.547235] nvme nvme0: 24/24/0 default/read/poll queues cat /sys/kernel/debug/block/nvme0n1/hctx*/type | sort | uniq -c 48 default The driver's hardware queue mapping is not same as block layer. Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-17ionic: export features for vlans to useShannon Nelson
Set up vlan_features for use by any vlans above us. Fixes: beead698b173 ("ionic: Add the basic NDO callbacks for netdev support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-17ionic: no link check while resetting queuesShannon Nelson
If the driver is busy resetting queues after a change in MTU or queue parameters, don't bother checking the link, wait until the next watchdog cycle. Fixes: 987c0871e8ae ("ionic: check for linkup in watchdog") Signed-off-by: Shannon Nelson <snelson@pensando.io> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-17Merge tag 'tags/bcm2835-drivers-fixes-2020-0-17' into drivers/fixesFlorian Fainelli
Fixes Raspberry Pi firmware version output Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-06-17rxrpc: Fix afs large storage transmission performance dropDavid Howells
Commit 2ad6691d988c, which moved the modification of the status annotation for a packet in the Tx buffer prior to the retransmission moved the state clearance, but managed to lose the bit that set it to UNACK. Consequently, if a retransmission occurs, the packet is accidentally changed to the ACK state (ie. 0) by masking it off, which means that the packet isn't counted towards the tally of newly-ACK'd packets if it gets hard-ACK'd. This then prevents the congestion control algorithm from recovering properly. Fix by reinstating the change of state to UNACK. Spotted by the generic/460 xfstest. Fixes: 2ad6691d988c ("rxrpc: Fix race between incoming ACK parser and retransmitter") Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-17rxrpc: Fix handling of rwind from an ACK packetDavid Howells
The handling of the receive window size (rwind) from a received ACK packet is not correct. The rxrpc_input_ackinfo() function currently checks the current Tx window size against the rwind from the ACK to see if it has changed, but then limits the rwind size before storing it in the tx_winsize member and, if it increased, wake up the transmitting process. This means that if rwind > RXRPC_RXTX_BUFF_SIZE - 1, this path will always be followed. Fix this by limiting rwind before we compare it to tx_winsize. The effect of this can be seen by enabling the rxrpc_rx_rwind_change tracepoint. Fixes: 702f2ac87a9a ("rxrpc: Wake up the transmitter if Rx window size increases on the peer") Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-17net: usb: ax88179_178a: fix packet alignment paddingJeremy Kerr
Using a AX88179 device (0b95:1790), I see two bytes of appended data on every RX packet. For example, this 48-byte ping, using 0xff as a payload byte: 04:20:22.528472 IP 192.168.1.1 > 192.168.1.2: ICMP echo request, id 2447, seq 1, length 64 0x0000: 000a cd35 ea50 000a cd35 ea4f 0800 4500 0x0010: 0054 c116 4000 4001 f63e c0a8 0101 c0a8 0x0020: 0102 0800 b633 098f 0001 87ea cd5e 0000 0x0030: 0000 dcf2 0600 0000 0000 ffff ffff ffff 0x0040: ffff ffff ffff ffff ffff ffff ffff ffff 0x0050: ffff ffff ffff ffff ffff ffff ffff ffff 0x0060: ffff 961f Those last two bytes - 96 1f - aren't part of the original packet. In the ax88179 RX path, the usbnet rx_fixup function trims a 2-byte 'alignment pseudo header' from the start of the packet, and sets the length from a per-packet field populated by hardware. It looks like that length field *includes* the 2-byte header; the current driver assumes that it's excluded. This change trims the 2-byte alignment header after we've set the packet length, so the resulting packet length is correct. While we're moving the comment around, this also fixes the spelling of 'pseudo'. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-17rxrpc: Fix trace stringDavid Howells
The trace symbol printer (__print_symbolic()) ignores symbols that map to an empty string and prints the hex value instead. Fix the symbol for rxrpc_cong_no_change to " -" instead of "" to avoid this. Fixes: b54a134a7de4 ("rxrpc: Fix handling of enums-to-string translation in tracing") Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-17drm/amdgpu: fix documentation around busy_percentageAlex Deucher
Add rename the gpu busy percentage for consistency and add the mem busy percentage documentation. Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-06-17drm/amdgpu/pm: update comment to clarify Overdrive interfacesAlex Deucher
Vega10 and previous asics use one interface, vega20 and newer use another. Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-06-17drm/amdkfd: Use correct major in devcgroup checkLorenz Brun
The existing code used the major version number of the DRM driver instead of the device major number of the DRM subsystem for validating access for a devices cgroup. This meant that accesses allowed by the devices cgroup weren't permitted and certain accesses denied by the devices cgroup were permitted (if they matched the wrong major device number). Signed-off-by: Lorenz Brun <lorenz@brun.one> Fixes: 6b855f7b83d2f ("drm/amdkfd: Check against device cgroup") Reviewed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-06-17selinux: fix undefined return of cond_evaluate_exprTom Rix
clang static analysis reports an undefined return security/selinux/ss/conditional.c:79:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn] return s[0]; ^~~~~~~~~~~ static int cond_evaluate_expr( ... { u32 i; int s[COND_EXPR_MAXDEPTH]; for (i = 0; i < expr->len; i++) ... return s[0]; When expr->len is 0, the loop which sets s[0] never runs. So return -1 if the loop never runs. Cc: stable@vger.kernel.org Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-06-17vfio/pci: Clear error and request eventfd ctx after releasingAlex Williamson
The next use of the device will generate an underflow from the stale reference. Cc: Qian Cai <cai@lca.pw> Fixes: 1518ac272e78 ("vfio/pci: fix memory leaks of eventfd ctx") Reported-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-06-17ftrace: Fix maybe-uninitialized compiler warningKaitao Cheng
During build compiler reports some 'false positive' warnings about variables {'seq_ops', 'filtered_pids', 'other_pids'} may be used uninitialized. This patch silences these warnings. Also delete some useless spaces Link: https://lkml.kernel.org/r/20200529141214.37648-1-pilgrimtao@gmail.com Signed-off-by: Kaitao Cheng <pilgrimtao@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-06-17nvdimm/region: always show the 'align' attributeVishal Verma
It is possible that a platform that is capable of 'namespace labels' comes up without the labels properly initialized. In this case, the region's 'align' attribute is hidden. Howerver, once the user does initialize he labels, the 'align' attribute still stays hidden, which is unexpected. The sysfs_update_group() API is meant to address this, and could be called during region probe, but it has entanglements with the device 'lockdep_mutex'. Therefore, simply make the 'align' attribute always visible. It doesn't matter what it says for label-less namespaces, since it is not possible to change their allocation anyway. Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/20200520225026.29426-1-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-06-17io_uring: reap poll completions while waiting for refs to drop on exitJens Axboe
If we're doing polled IO and end up having requests being submitted async, then completions can come in while we're waiting for refs to drop. We need to reap these manually, as nobody else will be looking for them. Break the wait into 1/20th of a second time waits, and check for done poll completions if we time out. Otherwise we can have done poll completions sitting in ctx->poll_list, which needs us to reap them but we're just waiting for them. Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-17s390: fix syscall_get_error for compat processesDmitry V. Levin
If both the tracer and the tracee are compat processes, and gprs[2] is assigned a value by __poke_user_compat, then the higher 32 bits of gprs[2] are cleared, IS_ERR_VALUE() always returns false, and syscall_get_error() always returns 0. Fix the implementation by sign-extending the value for compat processes the same way as x86 implementation does. The bug was exposed to user space by commit 201766a20e30f ("ptrace: add PTRACE_GET_SYSCALL_INFO request") and detected by strace test suite. This change fixes strace syscall tampering on s390. Link: https://lkml.kernel.org/r/20200602180051.GA2427@altlinux.org Fixes: 753c4dd6a2fa2 ("[S390] ptrace changes") Cc: Elvira Khabirova <lineprinter@altlinux.org> Cc: stable@vger.kernel.org # v2.6.28+ Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-17s390/qdio: warn about unexpected SLSB statesJulian Wiedmann
The way we produce SBALs to the device (first update q->nr_buf_used, then update the SLSB) should ensure that we never see some of the SLSB states when scanning the queue for progress. So make some noise if we do, this implies a bug in our SBAL tracking. Also tweak the WARN msg to provide more information. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-17s390/qdio: clean up usage of qdio_dataJulian Wiedmann
This removes the last remaining accesses to ->qdio_data from internal code. Just pass the qdio_irq struct where needed instead. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-17ARM: dts: NSP: Correct FA2 mailbox nodeMatthew Hagan
The FA2 mailbox is specified at 0x18025000 but should actually be 0x18025c00, length 0x400 according to socregs_nsp.h and board_bu.c. Also the interrupt was off by one and should be GIC SPI 151 instead of 150. Fixes: 17d517172300 ("ARM: dts: NSP: Add mailbox (PDC) to NSP") Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf 2020-06-17 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 2 day(s) which contain a total of 14 files changed, 158 insertions(+), 59 deletions(-). The main changes are: 1) Important fix for bpf_probe_read_kernel_str() return value, from Andrii. 2) [gs]etsockopt fix for large optlen, from Stanislav. 3) devmap allocation fix, from Toke. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-17Merge series "ASoC: SOF: Intel: update PCI IDs" from Pierre-Louis Bossart ↵Mark Brown
<pierre-louis.bossart@linux.intel.com>: Clean-up CometLake and add missing PCI IDs. Changes for the legacy driver are sent separately. Pierre-Louis Bossart (3): ASoC: Intel: SOF: merge COMETLAKE_LP and COMETLAKE_H ASoC: SOF: Intel: add PCI ID for CometLake-S ASoC: SOF: Intel: add PCI IDs for ICL-H and TGL-H sound/hda/intel-dsp-config.c | 4 +--- sound/soc/intel/boards/Kconfig | 4 ++-- sound/soc/sof/intel/Kconfig | 29 ++++++++--------------------- sound/soc/sof/sof-pci-dev.c | 24 ++++++++++++++---------- 4 files changed, 25 insertions(+), 36 deletions(-) -- 2.20.1
2020-06-17ASoC: hdac_hda: fix memleak with regmap not freed on removePierre-Louis Bossart
kmemleak throws error reports on module load/unload tests, add snd_hdac_regmap_exit() in .remove(). While we are at it, also fix the error handling flow in .probe() to use snd_hdac_regmap_exit() if needed. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200617164144.17859-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-17ASoC: SOF: Intel: add PCI IDs for ICL-H and TGL-HPierre-Louis Bossart
Usually the DSP is not traditionally enabled on H skews but this might be used moving forward. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200617164755.18104-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-17ASoC: SOF: Intel: add PCI ID for CometLake-SPierre-Louis Bossart
Mirror ID added for legacy HDaudio Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200617164755.18104-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-17ASoC: Intel: SOF: merge COMETLAKE_LP and COMETLAKE_HPierre-Louis Bossart
We already have two configurations for CometLake, and a third one coming. On other platforms, we used a single Kconfig option, so we should follow the same trend by merging the two cases in a backwards compatible way. The backwards compatibility is handled by overloading the COMETLAKE_LP kconfig as COMETLAKE. In practice we've never seen a case where COMETLAKE_H is not selected along with COMETLAKE_LP, so keeping one of the two is enough. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200617164755.18104-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-17io_uring: acquire 'mm' for task_work for SQPOLLJens Axboe
If we're unlucky with timing, we could be running task_work after having dropped the memory context in the sq thread. Since dropping the context requires a runnable task state, we cannot reliably drop it as part of our check-for-work loop in io_sq_thread(). Instead, abstract out the mm acquire for the sq thread into a helper, and call it from the async task work handler. Cc: stable@vger.kernel.org # v5.7 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-17io_uring: add memory barrier to synchronize io_kiocb's result and ↵Xiaoguang Wang
iopoll_completed In io_complete_rw_iopoll(), stores to io_kiocb's result and iopoll completed are two independent store operations, to ensure that once iopoll_completed is ture and then req->result must been perceived by the cpu executing io_do_iopoll(), proper memory barrier should be used. And in io_do_iopoll(), we check whether req->result is EAGAIN, if it is, we'll need to issue this io request using io-wq again. In order to just issue a single smp_rmb() on the completion side, move the re-submit work to io_iopoll_complete(). Cc: stable@vger.kernel.org Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> [axboe: don't set ->iopoll_completed for -EAGAIN retry] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-17io_uring: don't fail links for EAGAIN error in IOPOLL modeXiaoguang Wang
In IOPOLL mode, for EAGAIN error, we'll try to submit io request again using io-wq, so don't fail rest of links if this io request has links. Cc: stable@vger.kernel.org Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-17Merge tag 'dma-mapping-5.8-3' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fixes from Christoph Hellwig: "Fixes for the SEV atomic pool (Geert Uytterhoeven and David Rientjes)" * tag 'dma-mapping-5.8-3' of git://git.infradead.org/users/hch/dma-mapping: dma-pool: decouple DMA_REMAP from DMA_COHERENT_POOL dma-pool: fix too large DMA pools on medium memory size systems
2020-06-17maccess: rename probe_user_{read,write} to copy_{from,to}_user_nofaultChristoph Hellwig
Better describe what these functions do. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-17maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofaultChristoph Hellwig
Better describe what these functions do. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-17bpf: Document optval > PAGE_SIZE behavior for sockopt hooksStanislav Fomichev
Extend existing doc with more details about requiring ctx->optlen = 0 for handling optval > PAGE_SIZE. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200617010416.93086-3-sdf@google.com
2020-06-17selftests/bpf: Make sure optvals > PAGE_SIZE are bypassedStanislav Fomichev
We are relying on the fact, that we can pass > sizeof(int) optvals to the SOL_IP+IP_FREEBIND option (the kernel will take first 4 bytes). In the BPF program we check that we can only touch PAGE_SIZE bytes, but the real optlen is PAGE_SIZE * 2. In both cases, we override it to some predefined value and trim the optlen. Also, let's modify exiting IP_TOS usecase to test optlen=0 case where BPF program just bypasses the data as is. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200617010416.93086-2-sdf@google.com
2020-06-17bpf: Don't return EINVAL from {get,set}sockopt when optlen > PAGE_SIZEStanislav Fomichev
Attaching to these hooks can break iptables because its optval is usually quite big, or at least bigger than the current PAGE_SIZE limit. David also mentioned some SCTP options can be big (around 256k). For such optvals we expose only the first PAGE_SIZE bytes to the BPF program. BPF program has two options: 1. Set ctx->optlen to 0 to indicate that the BPF's optval should be ignored and the kernel should use original userspace value. 2. Set ctx->optlen to something that's smaller than the PAGE_SIZE. v5: * use ctx->optlen == 0 with trimmed buffer (Alexei Starovoitov) * update the docs accordingly v4: * use temporary buffer to avoid optval == optval_end == NULL; this removes the corner case in the verifier that might assume non-zero PTR_TO_PACKET/PTR_TO_PACKET_END. v3: * don't increase the limit, bypass the argument v2: * proper comments formatting (Jakub Kicinski) Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: David Laight <David.Laight@ACULAB.COM> Link: https://lore.kernel.org/bpf/20200617010416.93086-1-sdf@google.com
2020-06-17devmap: Use bpf_map_area_alloc() for allocating hash bucketsToke Høiland-Jørgensen
Syzkaller discovered that creating a hash of type devmap_hash with a large number of entries can hit the memory allocator limit for allocating contiguous memory regions. There's really no reason to use kmalloc_array() directly in the devmap code, so just switch it to the existing bpf_map_area_alloc() function that is used elsewhere. Fixes: 6f9d451ab1a3 ("xdp: Add devmap_hash map type for looking up devices by hashed index") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200616142829.114173-1-toke@redhat.com
2020-06-17xdp: Handle frame_sz in xdp_convert_zc_to_xdp_frame()Hangbin Liu
In commit 34cc0b338a61 we only handled the frame_sz in convert_to_xdp_frame(). This patch will also handle frame_sz in xdp_convert_zc_to_xdp_frame(). Fixes: 34cc0b338a61 ("xdp: Xdp_frame add member frame_sz and handle in convert_to_xdp_frame") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200616103518.2963410-1-liuhangbin@gmail.com
2020-06-17dm ioctl: use struct_size() helper in retrieve_deps()Gustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct dm_target_deps { ... __u64 dev[0]; /* out */ }; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-17dm writecache: skip writecache_wait when using pmem modeHuaisheng Ye
The array bio_in_progress is only used with ssd mode. So skip writecache_wait_for_ios in writecache_discard when pmem mode. Signed-off-by: Huaisheng Ye <yehs1@lenovo.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-17dm writecache: correct uncommitted_block when discarding uncommitted entryHuaisheng Ye
When uncommitted entry has been discarded, correct wc->uncommitted_block for getting the exact number. Fixes: 48debafe4f2fe ("dm: add writecache target") Cc: stable@vger.kernel.org Signed-off-by: Huaisheng Ye <yehs1@lenovo.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-17dm zoned: assign max_io_len correctlyHou Tao
The unit of max_io_len is sector instead of byte (spotted through code review), so fix it. Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-17tools headers UAPI: Sync linux/fs.h with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes from: b383a73f2b83 ("fs/ext4: Introduce DAX inode flag") And silence this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h' diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h It causes various beautifiers for things like fspick, fsmount, etc (see below) to get rebuilt, but this specific change doesn't make 'perf trace' be capable of decoding anything new, as we still don't decode what comes from ioctls, just its cmds. Details about the update: $ cp include/uapi/linux/fs.h tools/include/uapi/linux/fs.h $ git diff diff --git a/tools/include/uapi/linux/fs.h b/tools/include/uapi/linux/fs.h index 379a612f8f1d..f44eb0a04afd 100644 --- a/tools/include/uapi/linux/fs.h +++ b/tools/include/uapi/linux/fs.h @@ -262,6 +262,7 @@ struct fsxattr { #define FS_EA_INODE_FL 0x00200000 /* Inode used for large EA */ #define FS_EOFBLOCKS_FL 0x00400000 /* Reserved for ext4 */ #define FS_NOCOW_FL 0x00800000 /* Do not cow file */ +#define FS_DAX_FL 0x02000000 /* Inode is DAX */ #define FS_INLINE_DATA_FL 0x10000000 /* Reserved for ext4 */ #define FS_PROJINHERIT_FL 0x20000000 /* Create with parents projid */ #define FS_CASEFOLD_FL 0x40000000 /* Folder is case insensitive */ $ m make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build INSTALL GTK UI CC /tmp/build/perf/builtin-trace.o DESCEND plugins CC /tmp/build/perf/trace/beauty/fsmount.o CC /tmp/build/perf/trace/beauty/fspick.o CC /tmp/build/perf/trace/beauty/mount_flags.o CC /tmp/build/perf/trace/beauty/move_mount.o CC /tmp/build/perf/trace/beauty/renameat.o CC /tmp/build/perf/trace/beauty/sync_file_range.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf <SNIP> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-17tools include UAPI: Sync linux/vhost.h with the kernel sourcesArnaldo Carvalho de Melo
To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-17tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes in: 7e5b3c267d25 ("x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation") Addressing these tools/perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h With this one will be able to use these new AMD MSRs in filters, by name, e.g.: # perf trace -e msr:* --filter "msr==IA32_MCU_OPT_CTRL" ^C# Using -v we can see how it sets up the tracepoint filters, converting from the string in the filter to the numeric value: # perf trace -v -e msr:* --filter "msr==IA32_MCU_OPT_CTRL" Using CPUID GenuineIntel-6-8E-A 0x123 New filter for msr:read_msr: (msr==0x123) && (common_pid != 335 && common_pid != 30344) 0x123 New filter for msr:write_msr: (msr==0x123) && (common_pid != 335 && common_pid != 30344) 0x123 New filter for msr:rdpmc: (msr==0x123) && (common_pid != 335 && common_pid != 30344) mmap size 528384B ^C# The updating process shows how this affects tooling in more detail: $ diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h --- tools/arch/x86/include/asm/msr-index.h 2020-06-03 10:36:09.959910238 -0300 +++ arch/x86/include/asm/msr-index.h 2020-06-17 10:04:20.235052901 -0300 @@ -128,6 +128,10 @@ #define TSX_CTRL_RTM_DISABLE BIT(0) /* Disable RTM feature */ #define TSX_CTRL_CPUID_CLEAR BIT(1) /* Disable TSX enumeration */ +/* SRBDS support */ +#define MSR_IA32_MCU_OPT_CTRL 0x00000123 +#define RNGDS_MITG_DIS BIT(0) + #define MSR_IA32_SYSENTER_CS 0x00000174 #define MSR_IA32_SYSENTER_ESP 0x00000175 #define MSR_IA32_SYSENTER_EIP 0x00000176 $ set -o vi $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2020-06-17 10:05:49.653114752 -0300 +++ after 2020-06-17 10:06:01.777258731 -0300 @@ -51,6 +51,7 @@ [0x0000011e] = "IA32_BBL_CR_CTL3", [0x00000120] = "IDT_MCR_CTRL", [0x00000122] = "IA32_TSX_CTRL", + [0x00000123] = "IA32_MCU_OPT_CTRL", [0x00000140] = "MISC_FEATURES_ENABLES", [0x00000174] = "IA32_SYSENTER_CS", [0x00000175] = "IA32_SYSENTER_ESP", $ The related change to cpu-features.h affects this: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o This shouldn't be affecting that 'perf bench' entry: $ find tools/perf/ -type f | xargs grep SRBDS $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Gross <mgross@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-17Merge remote-tracking branch 'torvalds/master' into perf/urgentArnaldo Carvalho de Melo
To get some newer headers that got out of sync with the copies in tools/ so that we can try to have the tools/perf/ build clean for v5.8 with fewer pull requests. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-17perf script: Initialize zstd_dataMilian Wolff
Fixes segmentation fault when trying to interpret zstd-compressed data with perf script: ``` $ perf record -z ls ... [ perf record: Captured and wrote 0,010 MB perf.data, compressed (original 0,001 MB, ratio is 2,190) ] $ memcheck perf script ... ==67911== Invalid read of size 4 ==67911== at 0x5568188: ZSTD_decompressStream (in /usr/lib/libzstd.so.1.4.5) ==67911== by 0x6E726B: zstd_decompress_stream (zstd.c:100) ==67911== by 0x65729C: perf_session__process_compressed_event (session.c:72) ==67911== by 0x6598E8: perf_session__process_user_event (session.c:1583) ==67911== by 0x65BA59: reader__process_events (session.c:2177) ==67911== by 0x65BA59: __perf_session__process_events (session.c:2234) ==67911== by 0x65BA59: perf_session__process_events (session.c:2267) ==67911== by 0x5A7397: __cmd_script (builtin-script.c:2447) ==67911== by 0x5A7397: cmd_script (builtin-script.c:3840) ==67911== by 0x5FE9D2: run_builtin (perf.c:312) ==67911== by 0x711627: handle_internal_command (perf.c:364) ==67911== by 0x711627: run_argv (perf.c:408) ==67911== by 0x711627: main (perf.c:538) ==67911== Address 0x71d8 is not stack'd, malloc'd or (recently) free'd ``` Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> LPU-Reference: 20200612230333.72140-1-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-17dm zoned: fix uninitialized pointer dereferenceDamien Le Moal
Make sure that the local variable rzone in dmz_do_reclaim() is always initialized before being used for printing debug messages. Fixes: f97809aec589 ("dm zoned: per-device reclaim") Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-17regmap: Fix memory leak from regmap_register_patchCharles Keepax
When a register patch is registered the reg_sequence is copied but the memory allocated is never freed. Add a kfree in regmap_exit to clean it up. Fixes: 22f0d90a3482 ("regmap: Support register patch sets") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200617152129.19655-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-17tools, bpftool: Add ringbuf map type to map command docsTobias Klauser
Commit c34a06c56df7 ("tools/bpftool: Add ringbuf map to a list of known map types") added the symbolic "ringbuf" name. Document it in the bpftool map command docs and usage as well. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200616113303.8123-1-tklauser@distanz.ch
2020-06-17bpf: bpf_probe_read_kernel_str() has to return amount of data read on successAndrii Nakryiko
During recent refactorings, bpf_probe_read_kernel_str() started returning 0 on success, instead of amount of data successfully read. This majorly breaks applications relying on bpf_probe_read_kernel_str() and bpf_probe_read_str() and their results. Fix this by returning actual number of bytes read. Fixes: 8d92db5c04d1 ("bpf: rework the compat kernel probe handling") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200616050432.1902042-1-andriin@fb.com
generated by cgit (git 2.34.1) at 2025-09-12 08:18:49 +0000