| Age | Commit message (Collapse) | Author |
|---|
|
Add support to get/set embedded sync for both input and output pins.
The DPLL is able to lock on input reference when the embedded sync
frequency is 1 PPS and pulse width 25%. The esync on outputs are more
versatille and theoretically supports any esync frequency that divides
current output frequency but for now support the same that supported on
input pins (1 PPS & 25% pulse).
Note that for the output pins the esync divisor shares the same register
used for N-divided signal formats. Due to this the esync cannot be
enabled on outputs configured with one of the N-divided signal formats.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Prathosh Satish <prathosh.satish@microchip.com>
Co-developed-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20250715144633.149156-2-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Another set of changes, notably:
- cfg80211: fix double-free introduced earlier
- mac80211: fix RCU iteration in CSA
- iwlwifi: many cleanups (unused FW APIs, PCIe code, WoWLAN)
- mac80211: some work around how FIPS affects wifi, which was
wrong (RC4 is used by TKIP, not only WEP)
- cfg/mac80211: improvements for unsolicated probe response
handling
* tag 'wireless-next-2025-07-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (64 commits)
wifi: cfg80211: fix double free for link_sinfo in nl80211_station_dump()
wifi: cfg80211: fix off channel operation allowed check for MLO
wifi: mac80211: use RCU-safe iteration in ieee80211_csa_finish
wifi: mac80211_hwsim: Update comments in header
wifi: mac80211: parse unsolicited broadcast probe response data
wifi: cfg80211: parse attribute to update unsolicited probe response template
wifi: mac80211: don't use TPE data from assoc response
wifi: mac80211: handle WLAN_HT_ACTION_NOTIFY_CHANWIDTH async
wifi: mac80211: simplify __ieee80211_rx_h_amsdu() loop
wifi: mac80211: don't mark keys for inactive links as uploaded
wifi: mac80211: only assign chanctx in reconfig
wifi: mac80211_hwsim: Declare support for AP scanning
wifi: mac80211: clean up cipher suite handling
wifi: mac80211: don't send keys to driver when fips_enabled
wifi: cfg80211: Fix interface type validation
wifi: mac80211: remove ieee80211_link_unreserve_chanctx() return value
wifi: mac80211: don't unreserve never reserved chanctx
mwl8k: Add missing check after DMA map
wifi: mac80211: make VHT opmode NSS ignore a debug message
wifi: iwlwifi: remove support of several iwl_ppag_table_cmd versions
...
====================
Link: https://patch.msgid.link/20250717094610.20106-47-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
A relatively large set of changes, but most of them are quirk
information for various x86 systems. There is one more substantial fix
for a NULL pointer dereference when removing the AVS driver, plus one
for Kconfig dependencies.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of fixes:
- ath12k performance regression from -rc1
- cfg80211 counted_by() removal for scan request
as it doesn't match usage and keeps complaining
- iwlwifi crash with certain older devices
- iwlwifi missing an error path unlock
- iwlwifi compatibility with certain BIOS updates
* tag 'wireless-2025-07-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: Fix botched indexing conversion
wifi: cfg80211: remove scan request n_channels counted_by
wifi: ath12k: Fix packets received in WBM error ring with REO LUT enabled
wifi: iwlwifi: mask reserved bits in chan_state_active_bitmap
wifi: iwlwifi: pcie: fix locking on invalid TOP reset
====================
Link: https://patch.msgid.link/20250717091831.18787-5-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If we reload the GuC due to suspend/resume or GT reset then we
have to resend not only any VFs provisioning data, but also PF
configuration, like scheduling parameters (EQ, PT), as otherwise
GuC will continue to use default values.
Fixes: 411220808cee ("drm/xe/pf: Restart VFs provisioning after GT reset")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250711193316.1920-3-michal.wajdeczko@intel.com
(cherry picked from commit 1c38dd6afa4a8ecce28e94da794fd1d205c30f51)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
As part of the resume or GT reset, the PF driver schedules work
which is then used to complete restarting of the SR-IOV support,
including resending to the GuC configurations of provisioned VFs.
However, in case of short delay between those two actions, which
could be seen by triggering a GT reset on the suspened device:
$ echo 1 > /sys/kernel/debug/dri/0000:00:02.0/gt0/force_reset
this PF worker might be still busy, which lead to errors due to
just stopped or disabled GuC CTB communication:
[ ] xe 0000:00:02.0: [drm:xe_gt_resume [xe]] GT0: resumed
[ ] xe 0000:00:02.0: [drm] GT0: trying reset from force_reset_show [xe]
[ ] xe 0000:00:02.0: [drm] GT0: reset queued
[ ] xe 0000:00:02.0: [drm] GT0: reset started
[ ] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel stopped
[ ] xe 0000:00:02.0: [drm:guc_ct_send_recv [xe]] GT0: H2G request 0x5503 canceled!
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF1 12 config KLVs (-ECANCELED)
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF1 configuration (-ECANCELED)
[ ] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel disabled
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF2 12 config KLVs (-ENODEV)
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF2 configuration (-ENODEV)
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push 2 of 2 VFs configurations
[ ] xe 0000:00:02.0: [drm:pf_worker_restart_func [xe]] GT0: PF: restart completed
While this VFs reprovisioning will be successful during next spin
of the worker, to avoid those errors, make sure to cancel restart
worker if we are about to trigger next reset.
Fixes: 411220808cee ("drm/xe/pf: Restart VFs provisioning after GT reset")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250711193316.1920-2-michal.wajdeczko@intel.com
(cherry picked from commit 9f50b729dd61dfb9f4d7c66900d22a7c7353a8c0)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The check would fail if the address is unaligned, but not when
accounting the offset. Instead of `buf | offset` it should have
been `buf + offset`. To make it more readable and also drop the
uintptr_t, just use the IS_ALIGNED() macro.
Fixes: 270172f64b11 ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250710-migrate-aligned-v1-1-44003ef3c078@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 81e139db6900503a2e68009764054fad128fbf95)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
We need the topology to determine GT page fault queue size, move page
fault init after topology init.
Cc: stable@vger.kernel.org
Fixes: 3338e4f90c14 ("drm/xe: Use topology to determine page fault queue size")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250710191208.1040215-1-matthew.brost@intel.com
(cherry picked from commit beb72acb5b38dbe670d8eb752d1ad7a32f9c4119)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
MOCS uc_index is used even before it is initialized in the following
callstack
guc_prepare_xfer()
__xe_guc_upload()
xe_guc_min_load_for_hwconfig()
xe_uc_init_hwconfig()
xe_gt_init_hwconfig()
Do MOCS index initialization earlier in the device probe.
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com>
Link: https://lore.kernel.org/r/20250520142445.2792824-1-balasubramani.vivekanandan@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 241cc827c0987d7173714fc5a95a7c8fc9bf15c0)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net:
1) Three patches to enhance conntrack selftests for resize and clash
resolution, from Florian Westphal.
2) Expand nft_concat_range.sh selftest to improve coverage from error
path, from Florian Westphal.
3) Hide clash bit to userspace from netlink dumps until there is a
good reason to expose, from Florian Westphal.
4) Revert notification for device registration/unregistration for
nftables basechains and flowtables, we decided to go for a better
way to handle this through the nfnetlink_hook infrastructure which
will come via nf-next, patch from Phil Sutter.
5) Fix crash in conntrack due to race related to SLAB_TYPESAFE_BY_RCU
that results in removing a recycled object that is not yet in the
hashes. Move IPS_CONFIRM setting after the object is in the hashes.
From Florian Westphal.
netfilter pull request 25-07-17
* tag 'nf-25-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_conntrack: fix crash due to removal of uninitialised entry
Revert "netfilter: nf_tables: Add notifications for hook changes"
netfilter: nf_tables: hide clash bit from userspace
selftests: netfilter: nft_concat_range.sh: send packets to empty set
selftests: netfilter: conntrack_resize.sh: also use udpclash tool
selftests: netfilter: add conntrack clash resolution test case
selftests: netfilter: conntrack_resize.sh: extend resize test
====================
Link: https://patch.msgid.link/20250717095808.41725-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
After we do the modification on the host side, ensure we write the
result back to VRAM and not the other way around, otherwise the
modification will be lost if treated like a read.
Fixes: 270172f64b11 ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250710134128.800756-2-matthew.auld@intel.com
(cherry picked from commit c12fe703cab93f9d8bfe0ff32b58e7b1fd52be1f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Skipping TLB invalidations on VF causing unrecoverable
faults. Probable reason for skipping TLB invalidations
on SRIOV could be lack of support for instruction
MI_FLUSH_DW_STORE_INDEX. Add back TLB flush with some
additional handling.
Helps in resolving,
[ 704.913454] xe 0000:00:02.1: [drm:pf_queue_work_func [xe]]
ASID: 0
VFID: 0
PDATA: 0x0d92
Faulted Address: 0x0000000002fa0000
FaultType: 0
AccessType: 1
FaultLevel: 0
EngineClass: 3 bcs
EngineInstance: 8
[ 704.913551] xe 0000:00:02.1: [drm:pf_queue_work_func [xe]] Fault response: Unsuccessful -22
V2:
- Use Xmas tree (MichalW)
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Fixes: 97515d0b3ed92 ("drm/xe/vf: Don't emit access to Global HWSP if VF")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250710045945.1023840-1-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit b528e896fa570844d654b5a4617a97fa770a1030)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Pull NVMe fixes from Christoph:
"- revert the cross-controller atomic write size validation that caused
regressions (Christoph Hellwig)
- fix endianness of command word prints in nvme_log_err_passthru()
(John Garry)
- fix callback lock for TLS handshake (Maurizio Lombardi)
- fix misaccounting of nvme-mpath inflight I/O (Yu Kuai)
- fix inconsistent RCU list manipulation in nvme_ns_add_to_ctrl_list()
(Zheng Qixing)"
* tag 'nvme-6.16-2025-07-17' of git://git.infradead.org/nvme:
nvmet-tcp: fix callback lock for TLS handshake
nvme: fix misaccounting of nvme-mpath inflight I/O
nvme: revert the cross-controller atomic write size validation
nvme: fix endianness of command word prints in nvme_log_err_passthru()
nvme: fix inconsistent RCU list manipulation in nvme_ns_add_to_ctrl_list()
|
|
Synopsys DesignWare XPCS CSR clock is optional,
so it is better to use devm_clk_get_optional
instead of devm_clk_get.
Signed-off-by: Jack Ping CHNG <jchng@maxlinear.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250715021956.3335631-1-jchng@maxlinear.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit e8afa1557f4f963c9a511bd2c6074a941c308685.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
v3:
- cc stable
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Cc: <stable@vger.kernel.org> # v6.15+
Link: https://lore.kernel.org/r/20250715155934.150656-8-tzimmermann@suse.de
|
|
This reverts commit 1a148af06000e545e714fe3210af3d77ff903c11.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
v3:
- cc stable
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Cc: <stable@vger.kernel.org> # v6.15+
Link: https://lore.kernel.org/r/20250715155934.150656-7-tzimmermann@suse.de
|
|
This reverts commit cce16fcd7446dcff7480cd9d2b6417075ed81065.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
v3:
- cc stable
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Cc: <stable@vger.kernel.org> # v6.15+
Link: https://lore.kernel.org/r/20250715155934.150656-6-tzimmermann@suse.de
|
|
This reverts commit f83a9b8c7fd0557b0c50784bfdc1bbe9140c9bf8.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
v3:
- cc stable
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Cc: <stable@vger.kernel.org> # v6.15+
Link: https://lore.kernel.org/r/20250715155934.150656-5-tzimmermann@suse.de
|
|
This reverts commit e91eb3ae415472b28211d7fed07fa283845b311e.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/r/20250715155934.150656-4-tzimmermann@suse.de
|
|
This reverts commit aec8a40228acb385d60feec59b54573d307e60f3.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/r/20250715155934.150656-3-tzimmermann@suse.de
|
|
This reverts commit 415cb45895f43015515473fbc40563ca5eec9a7c.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/r/20250715155934.150656-3-tzimmermann@suse.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/linux
Tony Nguyen says:
====================
Add RDMA support for Intel IPU E2000 in idpf
Tatyana Nikolova says:
This idpf patch series is the second part of the staged submission for
introducing RDMA RoCEv2 support for the IPU E2000 line of products,
referred to as GEN3.
To support RDMA GEN3 devices, the idpf driver uses common definitions
of the IIDC interface and implements specific device functionality in
iidc_rdma_idpf.h.
The IPU model can host one or more logical network endpoints called
vPorts per PCI function that are flexibly associated with a physical
port or an internal communication port.
Other features as it pertains to GEN3 devices include:
* MMIO learning
* RDMA capability negotiation
* RDMA vectors discovery between idpf and control plane
These patches are split from the submission "Add RDMA support for Intel
IPU E2000 (GEN3)" [1]. The patches have been tested on a range of hosts
and platforms with a variety of general RDMA applications which include
standalone verbs (rping, perftest, etc.), storage and HPC applications.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
[1] https://lore.kernel.org/all/20240724233917.704-1-tatyana.e.nikolova@intel.com/
This idpf patch series is the second part of the staged submission for
introducing RDMA RoCEv2 support for the IPU E2000 line of products,
referred to as GEN3.
To support RDMA GEN3 devices, the idpf driver uses common definitions
of the IIDC interface and implements specific device functionality in
iidc_rdma_idpf.h.
The IPU model can host one or more logical network endpoints called
vPorts per PCI function that are flexibly associated with a physical
port or an internal communication port.
Other features as it pertains to GEN3 devices include:
* MMIO learning
* RDMA capability negotiation
* RDMA vectors discovery between idpf and control plane
These patches are split from the submission "Add RDMA support for Intel
IPU E2000 (GEN3)" [1]. The patches have been tested on a range of hosts
and platforms with a variety of general RDMA applications which include
standalone verbs (rping, perftest, etc.), storage and HPC applications.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
[1] https://lore.kernel.org/all/20240724233917.704-1-tatyana.e.nikolova@intel.com/
IWL reviews:
v3: https://lore.kernel.org/all/20250708210554.1662-1-tatyana.e.nikolova@intel.com/
v2: https://lore.kernel.org/all/20250612220002.1120-1-tatyana.e.nikolova@intel.com/
v1 (split from previous series):
https://lore.kernel.org/all/20250523170435.668-1-tatyana.e.nikolova@intel.com/
v3: https://lore.kernel.org/all/20250207194931.1569-1-tatyana.e.nikolova@intel.com/
RFC v2: https://lore.kernel.org/all/20240824031924.421-1-tatyana.e.nikolova@intel.com/
RFC: https://lore.kernel.org/all/20240724233917.704-1-tatyana.e.nikolova@intel.com/
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/linux:
idpf: implement get LAN MMIO memory regions
idpf: implement IDC vport aux driver MTU change handler
idpf: implement remaining IDC RDMA core callbacks and handlers
idpf: implement RDMA vport auxiliary dev create, init, and destroy
idpf: implement core RDMA auxiliary dev create, init, and destroy
idpf: use reserved RDMA vectors from control plane
====================
Link: https://patch.msgid.link/20250714181002.2865694-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When application A submits jobs and application B submits a job with a
dependency on A's fence, the normal flow wakes up the scheduler after
processing each job. However, the optimization in
drm_sched_entity_add_dependency_cb() uses a callback that only clears
dependencies without waking up the scheduler.
When application A is killed before its jobs can run, the callback gets
triggered but only clears the dependency without waking up the scheduler,
causing the scheduler to enter sleep state and application B to hang.
Remove the optimization by deleting drm_sched_entity_clear_dep() and its
usage, ensuring the scheduler is always woken up when dependencies are
cleared.
Fixes: 777dbd458c89 ("drm/amdgpu: drop a dummy wakeup scheduler")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Lin.Cao <lincao12@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250717084453.921097-1-lincao12@amd.com
|
|
A crash in conntrack was reported while trying to unlink the conntrack
entry from the hash bucket list:
[exception RIP: __nf_ct_delete_from_lists+172]
[..]
#7 [ff539b5a2b043aa0] nf_ct_delete at ffffffffc124d421 [nf_conntrack]
#8 [ff539b5a2b043ad0] nf_ct_gc_expired at ffffffffc124d999 [nf_conntrack]
#9 [ff539b5a2b043ae0] __nf_conntrack_find_get at ffffffffc124efbc [nf_conntrack]
[..]
The nf_conn struct is marked as allocated from slab but appears to be in
a partially initialised state:
ct hlist pointer is garbage; looks like the ct hash value
(hence crash).
ct->status is equal to IPS_CONFIRMED|IPS_DYING, which is expected
ct->timeout is 30000 (=30s), which is unexpected.
Everything else looks like normal udp conntrack entry. If we ignore
ct->status and pretend its 0, the entry matches those that are newly
allocated but not yet inserted into the hash:
- ct hlist pointers are overloaded and store/cache the raw tuple hash
- ct->timeout matches the relative time expected for a new udp flow
rather than the absolute 'jiffies' value.
If it were not for the presence of IPS_CONFIRMED,
__nf_conntrack_find_get() would have skipped the entry.
Theory is that we did hit following race:
cpu x cpu y cpu z
found entry E found entry E
E is expired <preemption>
nf_ct_delete()
return E to rcu slab
init_conntrack
E is re-inited,
ct->status set to 0
reply tuplehash hnnode.pprev
stores hash value.
cpu y found E right before it was deleted on cpu x.
E is now re-inited on cpu z. cpu y was preempted before
checking for expiry and/or confirm bit.
->refcnt set to 1
E now owned by skb
->timeout set to 30000
If cpu y were to resume now, it would observe E as
expired but would skip E due to missing CONFIRMED bit.
nf_conntrack_confirm gets called
sets: ct->status |= CONFIRMED
This is wrong: E is not yet added
to hashtable.
cpu y resumes, it observes E as expired but CONFIRMED:
<resumes>
nf_ct_expired()
-> yes (ct->timeout is 30s)
confirmed bit set.
cpu y will try to delete E from the hashtable:
nf_ct_delete() -> set DYING bit
__nf_ct_delete_from_lists
Even this scenario doesn't guarantee a crash:
cpu z still holds the table bucket lock(s) so y blocks:
wait for spinlock held by z
CONFIRMED is set but there is no
guarantee ct will be added to hash:
"chaintoolong" or "clash resolution"
logic both skip the insert step.
reply hnnode.pprev still stores the
hash value.
unlocks spinlock
return NF_DROP
<unblocks, then
crashes on hlist_nulls_del_rcu pprev>
In case CPU z does insert the entry into the hashtable, cpu y will unlink
E again right away but no crash occurs.
Without 'cpu y' race, 'garbage' hlist is of no consequence:
ct refcnt remains at 1, eventually skb will be free'd and E gets
destroyed via: nf_conntrack_put -> nf_conntrack_destroy -> nf_ct_destroy.
To resolve this, move the IPS_CONFIRMED assignment after the table
insertion but before the unlock.
Pablo points out that the confirm-bit-store could be reordered to happen
before hlist add resp. the timeout fixup, so switch to set_bit and
before_atomic memory barrier to prevent this.
It doesn't matter if other CPUs can observe a newly inserted entry right
before the CONFIRMED bit was set:
Such event cannot be distinguished from above "E is the old incarnation"
case: the entry will be skipped.
Also change nf_ct_should_gc() to first check the confirmed bit.
The gc sequence is:
1. Check if entry has expired, if not skip to next entry
2. Obtain a reference to the expired entry.
3. Call nf_ct_should_gc() to double-check step 1.
nf_ct_should_gc() is thus called only for entries that already failed an
expiry check. After this patch, once the confirmed bit check passes
ct->timeout has been altered to reflect the absolute 'best before' date
instead of a relative time. Step 3 will therefore not remove the entry.
Without this change to nf_ct_should_gc() we could still get this sequence:
1. Check if entry has expired.
2. Obtain a reference.
3. Call nf_ct_should_gc() to double-check step 1:
4 - entry is still observed as expired
5 - meanwhile, ct->timeout is corrected to absolute value on other CPU
and confirm bit gets set
6 - confirm bit is seen
7 - valid entry is removed again
First do check 6), then 4) so the gc expiry check always picks up either
confirmed bit unset (entry gets skipped) or expiry re-check failure for
re-inited conntrack objects.
This change cannot be backported to releases before 5.19. Without
commit 8a75a2c17410 ("netfilter: conntrack: remove unconfirmed list")
|= IPS_CONFIRMED line cannot be moved without further changes.
Cc: Razvan Cojocaru <rzvncj@gmail.com>
Link: https://lore.kernel.org/netfilter-devel/20250627142758.25664-1-fw@strlen.de/
Link: https://lore.kernel.org/netfilter-devel/4239da15-83ff-4ca4-939d-faef283471bb@gmail.com/
Fixes: 1397af5bfd7d ("netfilter: conntrack: remove the percpu dying list")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Since "net: gro: use cb instead of skb->network_header", the skb network
header is no longer set in the GRO path.
This breaks fraglist segmentation, which relies on ip_hdr()/tcp_hdr()
to check for address/port changes.
Fix this regression by selectively setting the network header for merged
segment skbs.
Fixes: 186b1ea73ad8 ("net: gro: use cb instead of skb->network_header")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250705150622.10699-1-nbd@nbd.name
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
devm_gpiod_put_array() is meant to undo the effects of
devm_gpiod_get_array() - in particular, it should release the GPIOs
contained in the array acquired with the latter. It is meant to be the
resource-managed version of gpiod_put_array(), and it should behave
similar to the non-array version devm_gpiod_put().
Since commit d1d52c6622a6 ("gpiolib: devres: Finish the conversion to
use devm_add_action()") it doesn't do that anymore, it just removes the
devres action and frees associated memory, but it doesn't actually
release the GPIOs.
Fix by switching from devm_remove_action() to devm_release_action(),
which will in addition invoke the action to release the GPIOs.
Fixes: d1d52c6622a6 ("gpiolib: devres: Finish the conversion to use devm_add_action()")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reported-by: Wattson CI <wattson-external@google.com>
Reported-by: Samuel Wu <wusamuel@google.com>
Link: https://lore.kernel.org/r/20250715-gpiolib-devres-put-array-fix-v1-1-970d82a8c887@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
pmc->idev is still used in ip6_mc_clear_src(), so as mld_clear_delrec()
does, the reference should be put after ip6_mc_clear_src() return.
Fixes: 63ed8de4be81 ("mld: add mc_lock for protecting per-interface mld data")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20250714141957.3301871-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ilya Leoshkevich says:
====================
s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL again
This series fixes a regression causing perf on s390 to trigger a kernel
panic.
Patch 1 fixes the issue, patch 2 adds a test to make sure this doesn't
happen again.
====================
Link: https://patch.msgid.link/20250716194524.48109-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a test that invokes a BPF prog in a loop, while concurrently
attaching and detaching another BPF prog to and from it. This helps
identifying race conditions in bpf_arch_text_poke().
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250716194524.48109-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit 7ded842b356d ("s390/bpf: Fix bpf_plt pointer arithmetic") has
accidentally removed the critical piece of commit c730fce7c70c
("s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL"), causing
intermittent kernel panics in e.g. perf's on_switch() prog to reappear.
Restore the fix and add a comment.
Fixes: 7ded842b356d ("s390/bpf: Fix bpf_plt pointer arithmetic")
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250716194524.48109-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Avoid invoking update_locked_rq() when the runqueue (rq) pointer is NULL
in the SCX_CALL_OP and SCX_CALL_OP_RET macros.
Previously, calling update_locked_rq(NULL) with preemption enabled could
trigger the following warning:
BUG: using __this_cpu_write() in preemptible [00000000]
This happens because __this_cpu_write() is unsafe to use in preemptible
context.
rq is NULL when an ops invoked from an unlocked context. In such cases, we
don't need to store any rq, since the value should already be NULL
(unlocked). Ensure that update_locked_rq() is only called when rq is
non-NULL, preventing calling __this_cpu_write() on preemptible context.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Fixes: 18853ba782bef ("sched_ext: Track currently locked rq")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v6.15
|
|
Tariq Toukan says:
====================
net/mlx5e: Add support for PCIe congestion events
Dragos says:
PCIe congestion events are events generated by the firmware when the
device side has sustained PCIe inbound or outbound traffic above
certain thresholds. The high and low threshold are hysteresis thresholds
to prevent flapping: once the high threshold has been reached, a low
threshold event will be triggered only after the bandwidth usage went
below the low threshold.
This series adds support for receiving and exposing such events as
ethtool counters.
2 new pairs of counters are exposed: pci_bw_in/outbound_high/low. These
should help the user understand if the device PCI is under pressure.
Planned followup patches:
- Allow configuration of thresholds through devlink.
- Add ethtool counter for wakeups which did not result in any state
change.
====================
Link: https://patch.msgid.link/1752589821-145787-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the PCIe Congestion Event notifier which triggers a work item
to query the PCIe Congestion Event object. The result of the congestion
state is reflected in the new ethtool stats:
* pci_bw_inbound_high: the device has crossed the high threshold for
inbound PCIe traffic.
* pci_bw_inbound_low: the device has crossed the low threshold for
inbound PCIe traffic
* pci_bw_outbound_high: the device has crossed the high threshold for
outbound PCIe traffic.
* pci_bw_outbound_low: the device has crossed the low threshold for
outbound PCIe traffic
The high and low thresholds are currently configured at 90% and 75%.
These are hysteresis thresholds which help to check if the
PCI bus on the device side is in a congested state.
If low + 1 = high then the device is in a congested state. If low == high
then the device is not in a congested state.
The counters are also documented.
A follow-up patch will make the thresholds configurable.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1752589821-145787-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add initial infrastructure to create and destroy the PCIe Congestion
Event object if the object is supported.
The verb for the object creation function is "set" instead of
"create" because the function will accommodate the modify operation
as well in a subsequent patch.
The next patches will hook it up to the event handler and will add
actual functionality.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1752589821-145787-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The netiucv driver creates TCP/IP interfaces over IUCV between Linux
guests on z/VM and other z/VM entities.
Rationale for removal:
- NETIUCV connections are only supported for compatibility with
earlier versions and not to be used for new network setups,
since at least Linux kernel 4.0.
- No known active users, use cases, or product dependencies
- The driver is no longer relevant for z/VM networking;
preferred methods include:
* Device pass-through (e.g., OSA, RoCE)
* z/VM Virtual Switch (VSWITCH)
The IUCV mechanism itself remains supported and is actively used
via AF_IUCV, hvc_iucv, and smsg_iucv.
Signed-off-by: Nagamani PV <nagamani@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250715074210.3999296-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ryan Wanner says:
====================
Expose REFCLK for RMII and enable RMII
This set allows the REFCLK property to be exposed as a dt-property to
properly reflect the correct RMII layout. RMII can take an external or
internal provided REFCLK, since this is not SoC dependent but board
dependent this must be exposed as a DT property for the macb driver.
This set also enables RMII mode for the SAMA7 SoCs gigabit mac.
v1: https://lore.kernel.org/cover.1750346271.git.Ryan.Wanner@microchip.com
====================
Link: https://patch.msgid.link/cover.1752510727.git.Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove USARIO_CLKEN flag since this is now a device tree argument and
not fixed to the SoC.
This will instead be selected by the "cdns,refclk-ext"
device tree property.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://patch.msgid.link/1e7a8c324526f631f279925aa8a6aa937d55c796.1752510727.git.Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This macro enables the RMII mode bit in the USRIO register when RMII
mode is requested.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://patch.msgid.link/6698836e4ee7df5f6bee181f0d2e38d4b8e4cec2.1752510727.git.Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RMII and RGMII can both support internal or external provided
REFCLKs 50MHz and 125MHz respectively. Since this is dependent on
the board that the SoC is on this needs to be set via the device tree.
This property flag is checked in the MACB DT node so the REFCLK cap is
configured the correct way for the RMII or RGMII is configured on the
board.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://patch.msgid.link/7f9b65896d6b7b48275bc527b72a16347f8ce10a.1752510727.git.Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
REFCLK can be provided by an external source so this should be exposed
by a DT property. The REFCLK is used for RMII and in some SoCs that use
this driver the RGMII 125MHz clk can also be provided by an external
source.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/d558467c4d5b27fb3135ffdead800b14cd9c6c0a.1752510727.git.Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Breno Leitao says:
====================
selftest: net: Add selftest for netpoll
I am submitting a new selftest for the netpoll subsystem specifically
targeting the case where the RX is polling in the TX path, which is
a case that we don't have any test in the tree today. This is done when
netpoll_poll_dev() called, and this test creates a scenario when that is
probably.
The test does the following:
1) Configuring a single RX/TX queue to increase contention on the
interface.
2) Generating background traffic to saturate the network, mimicking
real-world congestion.
3) Sending netconsole messages to trigger netpoll polling and monitor
its behavior.
4) Using dynamic netconsole targets via configfs, with the ability to
delete and recreate targets during the test.
5) Running bpftrace in parallel to verify that netpoll_poll_dev() is
called when expected. If it is called, then the test passes,
otherwise the test is marked as skipped.
In order to achieve it, I stole Jakub's bpftrace helper from [1], and
did some small changes that I found useful to use the helper.
So, this patchset basically contains:
1) The code stolen from Jakub
2) Improvements on bpftrace() helper
3) The selftest itself
Link: https://lore.kernel.org/all/20250421222827.283737-22-kuba@kernel.org/ [1]
====================
Link: https://patch.msgid.link/20250714-netpoll_test-v7-0-c0220cfaa63e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a basic selftest for the netpoll polling mechanism, specifically
targeting the netpoll poll() side.
The test creates a scenario where network transmission is running at
maximum speed, and netpoll needs to poll the NIC. This is achieved by:
1. Configuring a single RX/TX queue to create contention
2. Generating background traffic to saturate the interface
3. Sending netconsole messages to trigger netpoll polling
4. Using dynamic netconsole targets via configfs
5. Delete and create new netconsole targets after some messages
6. Start a bpftrace in parallel to make sure netpoll_poll_dev() is
called
7. If bpftrace exists and netpoll_poll_dev() was called, stop.
The test validates a critical netpoll code path by monitoring traffic
flow and ensuring netpoll_poll_dev() is called when the normal TX path
is blocked.
This addresses a gap in netpoll test coverage for a path that is
tricky for the network stack.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250714-netpoll_test-v7-3-c0220cfaa63e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The '@' prefix in bpftrace map keys is specific to bpftrace and can be
safely removed when processing results. This patch modifies the bpftrace
utility to strip the '@' from map keys before storing them in the result
dictionary, making the keys more consistent with Python conventions.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250714-netpoll_test-v7-2-c0220cfaa63e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bpftrace is very useful for low level driver testing. perf or trace-cmd
would also do for collecting data from tracepoints, but they require
much more post-processing.
Add a wrapper for running bpftrace and sanitizing its output.
bpftrace has JSON output, which is great, but it prints loose objects
and in a slightly inconvenient format. We have to read the objects
line by line, and while at it return them indexed by the map name.
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250714-netpoll_test-v7-1-c0220cfaa63e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clarify that drivers must remove device-reserved metadata from the
data_meta area before passing frames to XDP programs.
Additionally, expand the explanation of how userspace and BPF programs
should coordinate the use of METADATA_SIZE, and add a detailed diagram
to illustrate pointer adjustments and metadata layout.
Also describe the requirements and constraints enforced by
bpf_xdp_adjust_meta().
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20250716154846.3513575-1-yoong.siang.song@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-07-15 (ixgbe, fm10k, i40e, ice)
Arnd Bergmann resolves compile issues with large NR_CPUS for ixgbe, fm10k,
and i40e.
For ice:
Dave adds a NULL check for LAG netdev.
Michal corrects a pointer check in debugfs initialization.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: check correct pointer in fwlog debugfs
ice: add NULL check in eswitch lag check
ethernet: intel: fix building with large NR_CPUS
====================
Link: https://patch.msgid.link/20250715202948.3841437-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
np->name was being used after calling of_node_put(np), which
releases the node and can lead to a use-after-free bug.
Previously, of_node_put(np) was called unconditionally after
of_find_device_by_node(np), which could result in a use-after-free if
pdev is NULL.
This patch moves of_node_put(np) after the error check to ensure
the node is only released after both the error and success cases
are handled appropriately, preventing potential resource issues.
Fixes: 23290c7bc190 ("net: airoha: Introduce Airoha NPU support")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250715143102.3458286-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use __skb_queue_purge() instead of re-implementing it. Note that it uses
kfree_skb_reason() instead of kfree_skb() internally, and pass
SKB_DROP_REASON_QUEUE_PURGE drop reason to the kfree_skb tracepoint.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250715120709.3941510-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`vsock_do_ioctl` returns -ENOIOCTLCMD if an ioctl support is not
implemented, like for SIOCINQ before commit f7c722659275 ("vsock: Add
support for SIOCINQ ioctl"). In net/socket.c, -ENOIOCTLCMD is re-mapped
to -ENOTTY for the user space. So, our test suite, without that commit
applied, is failing in this way:
34 - SOCK_STREAM ioctl(SIOCINQ) functionality...ioctl(21531): Inappropriate ioctl for device
Return false in vsock_ioctl_int() to skip the test in this case as well,
instead of failing.
Fixes: 53548d6bffac ("test/vsock: Add retry mechanism to ioctl wrapper")
Cc: niuxuewei.nxw@antgroup.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Xuewei Niu <niuxuewei.nxw@antgroup.com>
Link: https://patch.msgid.link/20250715093233.94108-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The CI reported a UaF in tcp_prune_ofo_queue():
BUG: KASAN: slab-use-after-free in tcp_prune_ofo_queue+0x55d/0x660
Read of size 4 at addr ffff8880134729d8 by task socat/20348
CPU: 0 UID: 0 PID: 20348 Comm: socat Not tainted 6.16.0-rc5-virtme #1 PREEMPT(full)
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl+0x82/0xd0
print_address_description.constprop.0+0x2c/0x400
print_report+0xb4/0x270
kasan_report+0xca/0x100
tcp_prune_ofo_queue+0x55d/0x660
tcp_try_rmem_schedule+0x855/0x12e0
tcp_data_queue+0x4dd/0x2260
tcp_rcv_established+0x5e8/0x2370
tcp_v4_do_rcv+0x4ba/0x8c0
__release_sock+0x27a/0x390
release_sock+0x53/0x1d0
tcp_sendmsg+0x37/0x50
sock_write_iter+0x3c1/0x520
vfs_write+0xc09/0x1210
ksys_write+0x183/0x1d0
do_syscall_64+0xc1/0x380
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fcf73ef2337
Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007ffd4f924708 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fcf73ef2337
RDX: 0000000000002000 RSI: 0000555f11d1a000 RDI: 0000000000000008
RBP: 0000555f11d1a000 R08: 0000000000002000 R09: 0000000000000000
R10: 0000000000000040 R11: 0000000000000246 R12: 0000000000000008
R13: 0000000000002000 R14: 0000555ee1a44570 R15: 0000000000002000
</TASK>
Allocated by task 20348:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_slab_alloc+0x59/0x70
kmem_cache_alloc_node_noprof+0x110/0x340
__alloc_skb+0x213/0x2e0
tcp_collapse+0x43f/0xff0
tcp_try_rmem_schedule+0x6b9/0x12e0
tcp_data_queue+0x4dd/0x2260
tcp_rcv_established+0x5e8/0x2370
tcp_v4_do_rcv+0x4ba/0x8c0
__release_sock+0x27a/0x390
release_sock+0x53/0x1d0
tcp_sendmsg+0x37/0x50
sock_write_iter+0x3c1/0x520
vfs_write+0xc09/0x1210
ksys_write+0x183/0x1d0
do_syscall_64+0xc1/0x380
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 20348:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x38/0x50
kmem_cache_free+0x149/0x330
tcp_prune_ofo_queue+0x211/0x660
tcp_try_rmem_schedule+0x855/0x12e0
tcp_data_queue+0x4dd/0x2260
tcp_rcv_established+0x5e8/0x2370
tcp_v4_do_rcv+0x4ba/0x8c0
__release_sock+0x27a/0x390
release_sock+0x53/0x1d0
tcp_sendmsg+0x37/0x50
sock_write_iter+0x3c1/0x520
vfs_write+0xc09/0x1210
ksys_write+0x183/0x1d0
do_syscall_64+0xc1/0x380
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff888013472900
which belongs to the cache skbuff_head_cache of size 232
The buggy address is located 216 bytes inside of
freed 232-byte region [ffff888013472900, ffff8880134729e8)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x13472
head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x80000000000040(head|node=0|zone=1)
page_type: f5(slab)
raw: 0080000000000040 ffff88800198fb40 ffffea0000347b10 ffffea00004f5290
raw: 0000000000000000 0000000000120012 00000000f5000000 0000000000000000
head: 0080000000000040 ffff88800198fb40 ffffea0000347b10 ffffea00004f5290
head: 0000000000000000 0000000000120012 00000000f5000000 0000000000000000
head: 0080000000000001 ffffea00004d1c81 00000000ffffffff 00000000ffffffff
head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888013472880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888013472900: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888013472980: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
^
ffff888013472a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888013472a80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
Indeed tcp_prune_ofo_queue() is reusing the skb dropped a few lines
above. The caller wants to enqueue 'in_skb', lets check space vs the
latter.
Fixes: 1d2fbaad7cd8 ("tcp: stronger sk_rcvbuf checks")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: syzbot+865aca08c0533171bf6a@syzkaller.appspotmail.com
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/b78d2d9bdccca29021eed9a0e7097dd8dc00f485.1752567053.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
