| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fix from Marek Szyprowski:
- small fix relevant to arm64 server and custom CMA configuration (Feng
Tang)
* tag 'dma-mapping-6.16-2025-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-contiguous: hornor the cma address limit setup by user
|
|
Make sure to drop the OF node reference taken when creating the Gaokun
auxiliary devices when the devices are later released.
Fixes: 7636f090d02e ("platform: arm64: add Huawei Matebook E Go EC driver")
Cc: Pengyu Luo <mitltlatltl@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Pengyu Luo <mitltlatltl@gmail.com>
Link: https://lore.kernel.org/r/20250708085358.15657-1-johan@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Firmware would assert on undefined bits in DSM-originated DWs.
With this change, Firmware introduces a fail-safe mechanism
and removes the assert behavior. This ensures robustness when
handling raw DSM table data.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.eee871df03c9.I2be2eaa16437e84aa1be0c6c95ec334034ce7e50@changeid
|
|
Don't WARN, which results in a useless backtrace, but just use
IWL_FW_CHECK() instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.4aedc0979beb.I3bd4d4296c7245261651603708456b7c67f55539@changeid
|
|
In the current code, if there was a rekey, we remove all the existing keys
from mac80211, then re-add the ones that the FW sent with
ieee80211_gtk_rekey_add, (newer FW will send also the existing GTKs/BIGTKs)
and then update the sequence number.
Instead of removing and re-adding the existing keys for no good reason,
we can just update the sequence of all keys, also of the ones that are
going to be replaced, and update again after the replace.
This change is required because ieee80211_gtk_rekey_add is going to be
changed to lookup the cipher from the old key instead of receiving it as an
argument, and for this it will need the old key(s), so we can't remove all
keys.
Note that with this change, in case that a key that existed before wowlan
is replaced, mac80211 will now call the driver to remove the old key and
add the new one (as opposed the previous behaviour, in which the key was
removed by the driver itself).
Of course we don't want to run the set_key callbacks in this case, so just
return early.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.f0b5e19f77f5.I958f4926f168cdad6d4d7720ebde2f5e812b297d@changeid
|
|
In the current code, if there was a rekey, we remove all the existing keys
from mac80211, then re-add the ones that the FW sent with
ieee80211_gtk_rekey_add, (newer FW will send also the existing GTKs/BIGTKs)
and then update the sequence number.
Instead of removing and re-adding the existing keys for no good reason,
we can just update the sequence of all keys, also of the ones that are
going to be replaced, and update again after the replace.
This change is required because ieee80211_gtk_rekey_add is going to be
changed to lookup the cipher from the old key instead of receiving it as an
argument, and for this it will need the old key(s), so we can't remove all
keys.
Note that with this change, in case that a key that existed before wowlan
is replaced, mac80211 will now call the driver to remove the old key and
add the new one (as opposed the previous behaviour, in which the key was
removed by the driver itself).
Of course we don't want to run the set_key callbacks in this case, so just
return early.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.10091484e38e.I45daf089189f606f3879ca4538fb46303d761710@changeid
|
|
For older APIs, gtk_seq[0].key_id will be set to -1, while other code
assumes that it will always be a valid gtk key idx.
Since the FW does provide the idx for those APIs, simply set it.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.2a5a5e4d7b19.Ib795751119070495c0c95526cd36bd7f87594f56@changeid
|
|
We use gtk[i].id, but it is not even set in older FW APIs
(iwl_wowlan_status_v6 and iwl_wowlan_status_v7).
Set it also in older FWs.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.e91e49590414.I27d2fdbed1c54aee59929fa11ec169f07e159406@changeid
|
|
The default capabilities were set to much more than the hardware
currently is intended to support, and then masked off for only
the GL MAC type. However, this was due to some miscommunication
and is incorrect, it should've been masked off for all current
and planned MACs/RFs. Instead of doing this removing and adding
of capabilities, simply list the ones that currently apply to
all devices. If this changes for a new device type we can change
the code, but at least the driver won't erroneously advertise
some capabilities that aren't actually implemented in hardware.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.69b9dac7d906.I7885499bc80453d5a84285ec927f5e89f9adfb21@changeid
|
|
Add iwl_trans_is_dead() function to be called by the op modes instead
of directly checking the trans status bits. This hides the trans
internal implementation details from callers.
Signed-off-by: Rotem Kerem <rotem.kerem@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.cd89d8013261.I214b7ffbabc393593fb57831d61d1a9ffa318a1e@changeid
|
|
add iwl_trans_device_enabled() function to be called by the op modes
instead of directly checking the trans status bits. This
hides the trans internal implementation details.
Signed-off-by: Rotem Kerem <rotem.kerem@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.bb957ba9e130.I6ab825caf41308fb0f7aa1c266f50457fd0c496e@changeid
|
|
Add iwl_trans_suppress_cmd_error_once() function to be called by the op
modes instead of directly checking the trans status bits.
This hides the trans internal implementation details from callers.
Signed-off-by: Rotem Kerem <rotem.kerem@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.e061ae241fd3.Ie2043c4e237196ebcfe195006d3d76371de48a55@changeid
|
|
Later RFs will always do puncturing, regardless of BIOS
configuration, and earlier RFs aren't supported in MLD.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.6fa9c44964c1.I46a4cd744a769ec2ac3c8f9a04882140449394b8@changeid
|
|
We don't have puncturing before EHT, and EHT devices aren't
supported in iwlmvm, so remove the regulatory puncturing
setup code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.b2a28a99725b.I72ba276cb705c02cea8f68e27ef3935d5120cfee@changeid
|
|
The last version for the range response notification is 10.
Update the expected version accordingly.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.377d24e29ac6.I44119a4e793bba35b46e1d35e2c378ce6f901bfd@changeid
|
|
When a GO is started, the P2P device mac is updated to indicate
that frames for the P2P device mac should be filtered in while
the GO is active. However, this configuration is done after the GO is
already started so it doesn't take effect. Fix it by updating the
P2P device mac before adding the broadcast station, which actually
starts the GO.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.463a0ad545f9.I85a25484d787b65f6a27e794285911e319df0b2d@changeid
|
|
The scan request validation function uses bitwise and instead
of logical and. Fix it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.ec7d665f56a4.I416816b491fafa5d3efdf0a4be78356eedf2bd95@changeid
|
|
Currently, packets are being received into the WBM error ring when
REO queue lookup is enabled, resulting in degraded RX performance.
The issue arises because the REO queue LUT TID memory reference is
set to zero-it's being assigned before the memory is allocated.
Fix this by assigning the REO queue TID memory reference in the LUT
immediately after memory allocation to ensure correct packet
processing.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Reported-by: Tanguy Serrat <tanguy@squaremind.io>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220282
Fixes: 3b9cbce6fdd3 ("wifi: ath12k: alloc REO queue per station")
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250710011754.559817-1-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Commit under Fixes tightened up the memory accounting for Netlink
sockets. Looks like the accounting is too strict for some existing
use cases, Marek reported issues with nl80211 / WiFi iw CLI.
To reduce number of iterations Netlink dumps try to allocate
messages based on the size of the buffer passed to previous
recvmsg() calls. If user space uses a larger buffer in recvmsg()
than sk_rcvbuf we will allocate an skb we won't be able to queue.
Make sure we always allow at least one skb to be queued.
Same workaround is already present in netlink_attachskb().
Alternative would be to cap the allocation size to
rcvbuf - rmem_alloc
but as I said, the workaround is already present in other places.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/9794af18-4905-46c6-b12c-365ea2f05858@samsung.com
Fixes: ae8f160e7eb2 ("netlink: Fix wraparounds of sk->sk_rmem_alloc.")
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711001121.3649033-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need to allow queuing at least one skb even when skb is
larger than sk->sk_rcvbuf.
The cited commit made a mistake while converting a condition
in netlink_broadcast_deliver().
Let's correct the rmem check for the allow-one-skb rule.
Fixes: ae8f160e7eb24 ("netlink: Fix wraparounds of sk->sk_rmem_alloc.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711053208.2965945-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Michael Chan says:
====================
bnxt_en: 3 bug fixes
The first one fixes a possible failure when setting DCB ETS.
The second one fixes the ethtool coredump (-W 2) not containing
all the FW traces. The third one fixes the DMA unmap length when
transmitting XDP_REDIRECT packets.
====================
Link: https://patch.msgid.link/20250710213938.1959625-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set()
with the proper length instead of 0. This bug triggers this warning
on a system with IOMMU enabled:
WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170
RIP: 0010:__iommu_dma_unmap+0x159/0x170
Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45
b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00
RSP: 0018:ff22d31181150c88 EFLAGS: 00010206
RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000
R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000
R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00
FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0
PKRU: 55555554
Call Trace:
<IRQ>
? show_regs+0x6d/0x80
? __warn+0x89/0x160
? __iommu_dma_unmap+0x159/0x170
? report_bug+0x17e/0x1b0
? handle_bug+0x46/0x90
? exc_invalid_op+0x18/0x80
? asm_exc_invalid_op+0x1b/0x20
? __iommu_dma_unmap+0x159/0x170
? __iommu_dma_unmap+0xb3/0x170
iommu_dma_unmap_page+0x4f/0x100
dma_unmap_page_attrs+0x52/0x220
? srso_alias_return_thunk+0x5/0xfbef5
? xdp_return_frame+0x2e/0xd0
bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en]
__bnxt_poll_work_done+0x81/0x1e0 [bnxt_en]
bnxt_poll+0xd3/0x1e0 [bnxt_en]
Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250710213938.1959625-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnxt_fill_drv_seg_record() calls bnxt_dbg_hwrm_log_buffer_flush()
to flush the FW trace buffer. This needs to be done before we
call bnxt_copy_ctx_mem() to copy the trace data.
Without this fix, the coredump may not contain all the FW
traces.
Fixes: 3c2179e66355 ("bnxt_en: Add FW trace coredump segments to the coredump")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250710213938.1959625-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In bnxt_ets_validate(), the code incorrectly loops over all possible
traffic classes to check and add the ETS settings. Fix it to loop
over the configured traffic classes only.
The unconfigured traffic classes will default to TSA_ETS with 0
bandwidth. Looping over these unconfigured traffic classes may
cause the validation to fail and trigger this error message:
"rejecting ETS config starving a TC\n"
The .ieee_setets() will then fail.
Fixes: 7df4ae9fe855 ("bnxt_en: Implement DCBNL to support host-based DCBX.")
Reviewed-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250710213938.1959625-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function ll_temac_ethtools_set_ringparam() incorrectly checked
rx_pending twice, once correctly for RX and once mistakenly in place
of tx_pending. This caused tx_pending to be left unchecked against
TX_BD_NUM_MAX.
As a result, invalid TX ring sizes may have been accepted or valid
ones wrongly rejected based on the RX limit, leading to potential
misconfiguration or unexpected results.
This patch corrects the condition to properly validate tx_pending.
Fixes: f7b261bfc35e ("net: ll_temac: Make RX/TX ring sizes configurable")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250710180621.2383000-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tariq Toukan says:
====================
mlx5 misc fixes 2025-07-10
This small patchset provides misc bug fixes from the team to the mlx5
core and EN drivers.
====================
Link: https://patch.msgid.link/1752155624-24095-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
An optimization for promiscuous mode adds a high-priority steering
table with a single catch-all rule to steer all traffic directly to
the TTC table.
However, a gap exists between the creation of this table and the
insertion of the catch-all rule. Packets arriving in this brief window
would miss as no rule was inserted yet, unnecessarily incrementing the
'rx_steer_missed_packets' counter and dropped.
This patch resolves the issue by introducing a new prio for this
table, placing it between MLX5E_TC_PRIO and MLX5E_NIC_PRIO. By doing
so, packets arriving during the window now fall through to the next
prio (at MLX5E_NIC_PRIO) instead of being dropped.
Fixes: 1c46d7409f30 ("net/mlx5e: Optimize promiscuous mode")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1752155624-24095-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There's a race between disabling DIM and NAPI callbacks using the dim
pointer on the RQ or SQ.
If NAPI checks the DIM state bit and sees it still set, it assumes
`rq->dim` or `sq->dim` is valid. But if DIM gets disabled right after
that check, the pointer might already be set to NULL, leading to a NULL
pointer dereference in net_dim().
Fix this by calling `synchronize_net()` before freeing the DIM context.
This ensures all in-progress NAPI callbacks are finished before the
pointer is cleared.
Kernel log:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:net_dim+0x23/0x190
...
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x150/0x3e0
? common_interrupt+0xf/0xa0
? sysvec_call_function_single+0xb/0x90
? exc_page_fault+0x74/0x130
? asm_exc_page_fault+0x22/0x30
? net_dim+0x23/0x190
? mlx5e_poll_ico_cq+0x41/0x6f0 [mlx5_core]
? sysvec_apic_timer_interrupt+0xb/0x90
mlx5e_handle_rx_dim+0x92/0xd0 [mlx5_core]
mlx5e_napi_poll+0x2cd/0xac0 [mlx5_core]
? mlx5e_poll_ico_cq+0xe5/0x6f0 [mlx5_core]
busy_poll_stop+0xa2/0x200
? mlx5e_napi_poll+0x1d9/0xac0 [mlx5_core]
? mlx5e_trigger_irq+0x130/0x130 [mlx5_core]
__napi_busy_loop+0x345/0x3b0
? sysvec_call_function_single+0xb/0x90
? asm_sysvec_call_function_single+0x16/0x20
? sysvec_apic_timer_interrupt+0xb/0x90
? pcpu_free_area+0x1e4/0x2e0
napi_busy_loop+0x11/0x20
xsk_recvmsg+0x10c/0x130
sock_recvmsg+0x44/0x70
__sys_recvfrom+0xbc/0x130
? __schedule+0x398/0x890
__x64_sys_recvfrom+0x20/0x30
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
...
---[ end trace 0000000000000000 ]---
...
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Fixes: 445a25f6e1a2 ("net/mlx5e: Support updating coalescing configuration without resetting channels")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1752155624-24095-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When changing a node's parent, its scheduling element is destroyed and
re-created with bw_share 0. However, the node's bw_share field was not
updated accordingly.
Set the node's bw_share to 0 after re-creation to keep the software
state in sync with the firmware configuration.
Fixes: 9c7bbf4c3304 ("net/mlx5: Add support for setting parent of nodes")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1752155624-24095-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update MAINTAINERS to use my @kernel.org email address.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20250708101922.50560-4-kirill.shutemov%40linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-07-11
Sean Nyekjaer's patch targets the m_can driver and demotes the "msg
lost in rx" message to debug level to prevent flooding the kernel log
with error messages.
* tag 'linux-can-fixes-for-6.16-20250711' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: m_can: m_can_handle_lost_msg(): downgrade msg lost in rx message to debug level
====================
Link: https://patch.msgid.link/20250711102451.2828802-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the common AIA functions kvm_riscv_vcpu_aia_has_interrupts()
and kvm_riscv_aia_wakeon_hgei() lookup HGEI line using an array of VCPU
pointers before accessing HGEI[E|P] CSR which is slow and prone to race
conditions because there is a separate per-hart lock for the VCPU pointer
array and a separate per-VCPU rwlock for IMSIC VS-file (including HGEI
line) used by the VCPU. Due to these race conditions, it is observed
on QEMU RISC-V host that Guest VCPUs sleep in WFI and never wakeup even
with interrupt pending in the IMSIC VS-file because VCPUs were waiting
for HGEI wakeup on the wrong host CPU.
The IMSIC virtualization already keeps track of the HGEI line and the
associated IMSIC VS-file used by each VCPU so move the HGEI[E|P] CSR
access to IMSIC virtualization so that costly HGEI line lookup can be
avoided and likelihood of race-conditions when updating HGEI[E|P] CSR
is also reduced.
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Fixes: 3385339296d1 ("RISC-V: KVM: Use IMSIC guest files when available")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250707035345.17494-3-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
If VS-timer expires when no VCPU running on a host CPU then WFI
executed by such host CPU will be effective NOP resulting in no
power savings. This is as-per RISC-V Privileged specificaiton
which says: "WFI is also required to resume execution for locally
enabled interrupts pending at any privilege level, regardless of
the global interrupt enable at each privilege level."
To address the above issue, vstimecmp CSR must be set to -1UL over
here when VCPU is scheduled-out or exits to user space.
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Fixes: 8f5cb44b1bae ("RISC-V: KVM: Support sstc extension")
Fixes: cea8896bd936 ("RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc")
Reported-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2112578
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250707035345.17494-2-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.16-rc6 or final:
- Fix nouveau fail on debugfs errors.
- Magic 50 ms to fix nouveau suspend.
- Call rust destructor on drm device release.
- Fix DMA api error handling in tegra/nvdec.
- Fix PVR device reset.
- Habanalabs maintainer update.
- Small memory leak fix when nouveau acpi init fails.
- Do not attempt to bind to any PCI device with AGP capability.
- Make FB's acquire handles on backing object, same as i915/xe already does.
- Fix race in drm_gem_handle_create_tail.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e522cdc7-1787-48f2-97e5-0f94783970ab@linux.intel.com
|
|
Nam Cao says:
====================
Subject: [PATCH for-netdev v2 0/2] PCI: hv: MSI parent domain conversion
This series originally belongs to a bigger series sent to PCI tree:
https://lore.kernel.org/linux-pci/024f0122314198fe0a42fef01af53e8953a687ec.1750858083.git.namcao@linutronix.de/
However, during review, we noticed that the patch conflicts with another
patch in netdev tree:
https://lore.kernel.org/netdev/1749651015-9668-1-git-send-email-shradhagupta@linux.microsoft.com/
As this series has no dependency with the rest of the series, we think it
is best to split out this one and send it to netdev, to avoid conflict
resolution headache later on.
Can netdev maintainers please pick it up?
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move away from the legacy MSI domain setup, switch to use
msi_create_parent_irq_domain().
While doing the conversion, I noticed that hv_compose_msi_msg() is doing
more than it is supposed to (composing message). This function also
allocates and populates struct tran_int_desc, which should be done in
hv_pcie_domain_alloc() instead. It works, but it is not the correct design.
However, I have no hardware to test such change, therefore I leave a TODO
note.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Export irq_domain_free_irqs_top(), making it usable for drivers compiled as
modules.
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm Arm64 defconfig fixes for v6.16
The v6.16 driver and DeviceTree updates described and implemented CPU
frequency scaling for the Qualcomm X Elite platform. But the necessary
CPUCP mailbox driver was not enabled, resulting in a series of error
messages being logged during boot (and no CPU frequency scaling).
Enable the missing drivers to silence the errors, and enable CPU
frequency scaling on this platform.
* tag 'qcom-arm64-defconfig-fixes-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm CPUCP mailbox driver
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm DeviceTree fixes for v6.16
The RTC DeviceTree binding was changed in v6.16, to require an explicit
flag indicating that we store RTC offset in in an UEFI variable.
The result sent X Elite and Lenovo Thinkpad X13s users back to 1970, add
the flag to explicitly select the correct configuration for these
devices.
* tag 'qcom-arm64-fixes-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: x1e80100: describe uefi rtc offset
arm64: dts: qcom: sc8280xp-x13s: describe uefi rtc offset
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into arm/fixes
ASPEED SoC driver fixes for 6.16
Address concerns in the ASPEED LPC snoop driver identified in the first two
patches of the cleanup series at [1].
[1]: https://lore.kernel.org/all/20250616-aspeed-lpc-snoop-fixes-v2-0-3cdd59c934d3@codeconstruct.com.au/
* tag 'aspeed-6.16-fixes-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
soc: aspeed: lpc-snoop: Don't disable channels that aren't enabled
soc: aspeed: lpc-snoop: Cleanup resources in stack-order
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Switch to the gpio variant for spi-cs and mmc-detect for some boards
as the in-controller functionality does not work as intended for them.
HDMI drive strength adjustment for better ddc communication and some
missing supplies.
* tag 'v6.16-rockchip-dtsfixes1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add missing fan-supply to rk3566-quartz64-a
arm64: dts: rockchip: use cs-gpios for spi1 on ringneck
arm64: dts: rockchip: list all CPU supplies on ArmSoM Sige5
arm64: dts: rockchip: Add cd-gpios for sdcard detect on Cool Pi 4B
arm64: dts: rockchip: Add cd-gpios for sdcard detect on Cool Pi CM5
arm64: dts: rockchip: Adjust the HDMI DDC IO driver strength for rk3588
arm64: dts: rockchip: fix rk3576 pcie1 linux,pci-domain
Link: https://lore.kernel.org/r/5108768.AiC22s8V5E@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
debug level
Downgrade the "msg lost in rx" message to debug level, to prevent
flooding the kernel log with error messages.
Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support")
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250711-mcan_ratelimit-v3-1-7413e8e21b84@geanix.com
[mkl: enhance commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Drop unused macros from the rcar_canfd.c.
Reported-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Closes: https://lore.kernel.org/all/7ff93ff9-f578-4be2-bdc6-5b09eab64fe6@wanadoo.fr/
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250702120539.98490-1-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In the buffer write path, iomap_set_range_uptodate() is called every
time iomap_end_write() is called. But if folio_test_uptodate() holds, we
know that all blocks in this folio are already in the uptodate state, so
there is no need to go deep into the critical section of state_lock to
execute bitmap_set().
This is because the folios always creep towards ifs_is_fully_uptodate()
state and once they've gotten there folio_mark_uptodate() is called, which
means the folio is uptodate.
Then once a folio is uptodate, there is no route back to !uptodate without
going through the removal of the folio from the page cache. Therefore, it's
fine to use folio_test_uptodate() to short-circuit unnecessary code paths.
Although state_lock may not have significant lock contention due to
folio lock, this patch at least reduces the number of instructions,
especially the expensive lock-prefixed instructions.
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Link: https://lore.kernel.org/20250711081207.1782667-1-alexjlzheng@tencent.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Verify that the inode mode is sane when loading it from the disk to
avoid complaints from VFS about setting up invalid inodes.
Reported-by: syzbot+895c23f6917da440ed0d@syzkaller.appspotmail.com
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/20250709095545.31062-2-jack@suse.cz
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Clear LMTT page to avoid leaking data from one VF to another
- Align PF queue size to power of 2
- Disable Indirect Ring State to avoid intermittent issues on context
switch: feature is not currently needed, so can be disabled for now.
- Fix compression handling when the BO pages are very fragmented
- Restore display pm on error path
- Fix runtime pm handling in xe devcoredump
- Fix xe_pm_set_vram_threshold() doc
- Recommend new minor versions of GuC firmware
- Drop some workarounds on VF
- Do not use verbose GuC logging by default: it should be only for
debugging
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/s6jyd24mimbzb4vxtgc5vupvbyqplfep2c6eupue7znnlbhuxy@lmvzexfzhrnn
|
|
Convert the Renesas R-Car CAN driver from SIMPLE_DEV_PM_OPS() to
DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(). This lets us drop the
__maybe_unused annotations from its suspend and resume callbacks, and
reduces kernel size in case CONFIG_PM or CONFIG_PM_SLEEP is disabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/6ffe085f6e2548f53674dd11704b388cf4b303e9.1752086078.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
Short summary of fixes:
- DSI panel's version 2 mipi-sequences fix (Hans)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aHA_eR0G7X2P6_ib@intel.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.16:
- Keep LDO5 always on for imx8mm-verdin to fix broken Ethernet support
- Add big-endian property back for LS1046A watchdog, as the removal was
an accident
- Fix DMA interrupter number of i.MX95 pcie0_ep device
- A set of changes from Tim Harvey to fix TPM SPI frequency on
imx8mp-venice devices
- A couple of changes from Wei Fang to fix NETC overshoot issue on
i.MX95 EVK boards
* tag 'imx-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: imx8mm-verdin: Keep LDO5 always on
arm64: dts: imx95: Correct the DMA interrupter number of pcie0_ep
arm64: dts: add big-endian property back into watchdog node
arm64: dts: imx95-15x15-evk: fix the overshoot issue of NETC
arm64: dts: imx95-19x19-evk: fix the overshoot issue of NETC
arm64: dts: imx8mp-venice-gw74xx: fix TPM SPI frequency
arm64: dts: imx8mp-venice-gw73xx: fix TPM SPI frequency
arm64: dts: imx8mp-venice-gw72xx: fix TPM SPI frequency
arm64: dts: imx8mp-venice-gw71xx: fix TPM SPI frequency
Link: https://lore.kernel.org/r/aGzNeZ7KtsRsUkZT@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Nandor's address has been bouncing for some time now. Remove it from
MAINTAINERS. The affected driver falls under the wider umbrella of GPIO
modules.
Link: https://lore.kernel.org/r/20250709071825.16212-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
