| Age | Commit message (Collapse) | Author |
|---|
|
Because typing is hard...
Fixes: 0862ff059c9e ("sh/mm: Make pmd_t similar to pte_t")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This fixes a potential memory leak of dma_fence objects in the CS code
as well as glitches in firefox because of missing pipeline sync.
v2: use the scheduler instead of the fence context
Signed-off-by: Christian König <christian.koenig@amd.com>
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2323
Tested-by: Michal Kubecek mkubecek@suse.cz
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230109130120.73389-1-christian.koenig@amd.com
|
|
During setup, there is a possible race between a page invalidate
and hardware programming. Add a covering invalidate over the user
target range during setup. If anything within that range is
invalidated during setup, fail the setup. Once set up, each
TID will have its own invalidate callback and invalidate.
Fixes: 3889551db212 ("RDMA/hfi1: Use mmu_interval_notifier_insert for user_exp_rcv")
Signed-off-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/167328549178.1472310.9867497376936699488.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When a user expected receive page is unmapped, it should be
immediately removed from hardware rather than depend on a
reaction from user space.
Fixes: 2677a7680e77 ("IB/hfi1: Fix memory leak during unexpected shutdown")
Signed-off-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/167328548663.1472310.7871808081861622659.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Fix three error exit issues in expected receive setup.
Re-arrange error exits to increase readability.
Issues and fixes:
1. Possible missed page unpin if tidlist copyout fails and
not all pinned pages where made part of a TID.
Fix: Unpin the unused pages.
2. Return success with unset return values tidcnt and length
when no pages were pinned.
Fix: Return -ENOSPC if no pages were pinned.
3. Return success with unset return values tidcnt and length when
no rcvarray entries available.
Fix: Return -ENOSPC if no rcvarray entries are available.
Fixes: 7e7a436ecb6e ("staging/hfi1: Add TID entry program function body")
Fixes: 97736f36dbeb ("IB/hfi1: Validate page aligned for a given virtual addres")
Fixes: f404ca4c7ea8 ("IB/hfi1: Refactor hfi_user_exp_rcv_setup() IOCTL")
Signed-off-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/167328548150.1472310.1492305874804187634.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
To avoid a race, reserve the number of user expected
TIDs before setup.
Fixes: 7e7a436ecb6e ("staging/hfi1: Add TID entry program function body")
Signed-off-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/167328547636.1472310.7419712824785353905.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
A zero length user buffer makes no sense and the code
does not handle it correctly. Instead, reject a
zero length as invalid.
Fixes: 97736f36dbeb ("IB/hfi1: Validate page aligned for a given virtual addres")
Signed-off-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/167328547120.1472310.6362802432127399257.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When registering a new DMA MR after selecting the best aligned page size
for it, we iterate over the given sglist to split each entry to smaller,
aligned to the selected page size, DMA blocks.
In given circumstances where the sg entry and page size fit certain
sizes and the sg entry is not aligned to the selected page size, the
total size of the aligned pages we need to cover the sg entry is >= 4GB.
Under this circumstances, while iterating page aligned blocks, the
counter responsible for counting how much we advanced from the start of
the sg entry is overflowed because its type is u32 and we pass 4GB in
size. This can lead to an infinite loop inside the iterator function
because the overflow prevents the counter to be larger
than the size of the sg entry.
Fix the presented problem by changing the advancement condition to
eliminate overflow.
Backtrace:
[ 192.374329] efa_reg_user_mr_dmabuf
[ 192.376783] efa_register_mr
[ 192.382579] pgsz_bitmap 0xfffff000 rounddown 0x80000000
[ 192.386423] pg_sz [0x80000000] umem_length[0xc0000000]
[ 192.392657] start 0x0 length 0xc0000000 params.page_shift 31 params.page_num 3
[ 192.399559] hp_cnt[3], pages_in_hp[524288]
[ 192.403690] umem->sgt_append.sgt.nents[1]
[ 192.407905] number entries: [1], pg_bit: [31]
[ 192.411397] biter->__sg_nents [1] biter->__sg [0000000008b0c5d8]
[ 192.415601] biter->__sg_advance [665837568] sg_dma_len[3221225472]
[ 192.419823] biter->__sg_nents [1] biter->__sg [0000000008b0c5d8]
[ 192.423976] biter->__sg_advance [2813321216] sg_dma_len[3221225472]
[ 192.428243] biter->__sg_nents [1] biter->__sg [0000000008b0c5d8]
[ 192.432397] biter->__sg_advance [665837568] sg_dma_len[3221225472]
Fixes: a808273a495c ("RDMA/verbs: Add a DMA iterator to return aligned contiguous memory blocks")
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Link: https://lore.kernel.org/r/20230109133711.13678-1-ynachum@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
resources allocated like mcam entries to support the Ntuple feature
and hash tables for the tc feature are not getting freed in driver
unbind. This patch fixes the issue.
Fixes: 2da489432747 ("octeontx2-pf: devlink params support to set mcam entry count")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20230109061325.21395-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The correct address offset is 0x12100.
Fixes: 31be791e26cf ("arm64: dts: marvell: Add UART1-3 for AC5/AC5X")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Guillaume Nault says:
====================
selftests/net: Isolate l2_tos_ttl_inherit.sh in its own netns.
l2_tos_ttl_inherit.sh uses a veth pair to run its tests, but only one
of the veth interfaces runs in a dedicated netns. The other one remains
in the initial namespace where the existing network configuration can
interfere with the setup used for the tests.
Isolate both veth devices in their own netns and ensure everything gets
cleaned up when the script exits.
Link: https://lore.kernel.org/netdev/924f1062-ab59-9b88-3b43-c44e73a30387@alu.unizg.hr/
====================
Link: https://lore.kernel.org/r/cover.1673191942.git.gnault@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use 'set -e' and an exit handler to stop the script if a command fails
and ensure the test environment is cleaned up in any case. Also, handle
the case where the script is interrupted by SIGINT.
The only command that's expected to fail is 'wait $ping_pid', since
it's killed by the script. Handle this case with '|| true' to make it
play well with 'set -e'.
Finally, return the Kselftest SKIP code (4) when the script breaks
because of an environment problem or a command line failure. The 0 and
1 return codes should now reliably indicate that all tests have been
run (0: all tests run and passed, 1: all tests run but at least one
failed, 4: test script didn't run completely).
Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This selftest currently runs half in the current namespace and half in
a netns of its own. Therefore, the test can fail if the current
namespace is already configured with incompatible parameters (for
example if it already has a veth0 interface).
Adapt the script to put both ends of the veth pair in their own netns.
Now veth0 is created in NS0 instead of the current namespace, while
veth1 is set up in NS1 (instead of the 'testing' netns).
The user visible netns names are randomised to minimise the risk of
conflicts with already existing namespaces. The cleanup() function
doesn't need to remove the virtual interface anymore: deleting NS0 and
NS1 automatically removes the virtual interfaces they contained.
We can remove $ns, which was only used to run ip commands in the
'testing' netns (let's use the builtin "-netns" option instead).
However, we still need a similar functionality as ping and tcpdump
now need to run in NS0. So we now have $RUN_NS0 for that.
Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ping command can run before DAD completes. In that case, ping may
fail and break the selftest.
We don't need DAD here since we're working on isolated device pairs.
Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As reported by syzbot [1], kvcalloc() cannot work with __GFP_NOFAIL.
Let's use kcalloc() instead.
[1] https://lore.kernel.org/r/0000000000007796bd05f1852ec2@google.com
Reported-by: syzbot+c3729cda01706a04fb98@syzkaller.appspotmail.com
Fixes: fe3e5914e6dc ("erofs: try to leave (de)compressed_pages on stack if possible")
Fixes: 4f05687fd703 ("erofs: introduce struct z_erofs_decompress_backend")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230110074927.41651-1-hsiangkao@linux.alibaba.com
|
|
Effective offset to add to length was being incorrectly calculated,
which resulted in iomap->length being set to 0, triggering a WARN_ON
in iomap_iter_done().
Fix that, and describe it in comments.
This was reported as a crash by syzbot under an issue about a warning
encountered in iomap_iter_done(), but unrelated to erofs.
C reproducer: https://syzkaller.appspot.com/text?tag=ReproC&x=1037a6b2880000
Kernel config: https://syzkaller.appspot.com/text?tag=KernelConfig&x=e2021a61197ebe02
Dashboard link: https://syzkaller.appspot.com/bug?extid=a8e049cd3abd342936b6
Reported-by: syzbot+a8e049cd3abd342936b6@syzkaller.appspotmail.com
Suggested-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20221209102151.311049-1-code@siddh.me
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Add the 'HP Engage Flex Mini' device to the force connect list to
enable audio through HDMI.
Signed-off-by: Adrian Chan <adchan@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230109210520.16060-1-adchan@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The nvme patterns detect all include files starting with nvme, which
also picks up the nvmem subsystem header files. Fix this by using
a more specific pattern.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[hch: switched to a purely inclusive pattern instead of excluding nvmem*]
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Passthrough commands can always access the entire device, and thus
submitting them on partitions is an privelege escalation.
In hindsight we should have never allowed any passthrough commands on
partitions, but it's probably too late to change that decision now.
Fixes: e4fbcf32c860 ("nvme: identify-namespace without CAP_SYS_ADMIN")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
To prepare for passing down more information, replace the boolean
vec argument with a more extensible flags one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
Open code __nvme_ioctl in the two callers to make future changes that
pass down additional paramters in the ioctl path easier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
There are two issues in nvme_pci_enable():
1) If pci_alloc_irq_vectors() fails, device is left enabled. Fix this by
adding a goto disable statement.
2) nvme_pci_configure_admin_queue could return -ENODEV, in this case,
we will need to free IRQ properly. Otherwise the following warning
could be triggered:
[ 5.286752] WARNING: CPU: 0 PID: 33 at kernel/irq/irqdomain.c:253 irq_domain_remove+0x12d/0x140
[ 5.290547] Call Trace:
[ 5.290626] <TASK>
[ 5.290695] msi_remove_device_irq_domain+0xc9/0xf0
[ 5.290843] msi_device_data_release+0x15/0x80
[ 5.290978] release_nodes+0x58/0x90
[ 5.293788] WARNING: CPU: 0 PID: 33 at kernel/irq/msi.c:276 msi_device_data_release+0x76/0x80
[ 5.297573] Call Trace:
[ 5.297651] <TASK>
[ 5.297719] release_nodes+0x58/0x90
[ 5.297831] devres_release_all+0xef/0x140
[ 5.298339] device_unbind_cleanup+0x11/0xc0
[ 5.298479] really_probe+0x296/0x320
Fixes: a6ee7f19ebfd ("nvme-pci: call nvme_pci_configure_admin_queue from nvme_pci_enable")
Co-developed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This mirrors the quirk added to Apple Silicon controllers in apple.c.
These controllers do not support the Active NS ID List command and
behave identically to the SoC version judging by existing user
reports/syslogs, so will need the same fix. This quirk reverts
back to NVMe 1.0 behavior and disables the broken commands.
Fixes: 811f4de0344d ("nvme: avoid fallback to sequential scan due to transient issues")
Signed-off-by: Hector Martin <marcan@marcan.st>
Tested-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
From the get-go, this driver and the ANS syslog have been complaining
about namespace identification. In 6.2-rc1, commit 811f4de0344d ("nvme:
avoid fallback to sequential scan due to transient issues") regressed
the driver by no longer allowing fallback to sequential namespace scans,
leaving us with no namespaces.
It turns out that the real problem is that this controller claiming
NVMe 1.1 compat is treating the CNS field as a binary field, as in NVMe
1.0. This already has a quirk, NVME_QUIRK_IDENTIFY_CNS, so set it for
the controller to fix all this nonsense (including other errors
triggered by other CNS commands).
Fixes: 811f4de0344d ("nvme: avoid fallback to sequential scan due to transient issues")
Fixes: 5bd2927aceba ("nvme-apple: Add initial Apple SoC NVMe driver")
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
entity (SecY)
Upon updating MAC security entity (SecY) in hw offload path, the macsec
security association (SA) initialization routine is called. In case of
extended packet number (epn) is enabled the salt and ssci attributes are
retrieved using the MACsec driver rx_sa context which is unavailable when
updating a SecY property such as encoding-sa hence the null dereference.
Fix by using the provided SA to set those attributes.
Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently when macsec offload is set with extended packet number (epn)
enabled, the driver wrongly deduce the short secure channel identifier
(ssci) from the salt instead of the stand alone ssci attribute as it
should, consequently creating a mismatch between the kernel and driver's
ssci values.
Fix by using the ssci value from the relevant attribute.
Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When a capability is set via port function caps callbacks, a memcpy() is
performed in which the source and the target are the same address, e.g.:
the copy is redundant. Hence, Remove it.
Discovered by Coverity.
Fixes: 7db98396ef45 ("net/mlx5: E-Switch, Implement devlink port function cmds to control RoCE")
Fixes: e5b9642a33be ("net/mlx5: E-Switch, Implement devlink port function cmds to control migratable")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Previously, encap rules with gbp option would be offloaded by mistake but
driver does not support gbp option offload.
To fix this issue, check if the encap rule has gbp option and don't
offload the rule
Fixes: d8f9dfae49ce ("net: sched: allow flower to match vxlan options")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
.max_adj of ptp_clock_info acts as an absolute value for the amount in ppb
that can be set for a single call of .adjfine. This means that a single
call to .getfine cannot be greater than .max_adj or less than -(.max_adj).
Provides correct value for max frequency adjustment value supported by
devices.
Fixes: 3d8c38af1493 ("net/mlx5e: Add PTP Hardware Clock (PHC) support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When updating statistics driver queries the vport's counters. On fail,
add error path releasing the allocated buffer avoiding memory leak.
Fixes: 64b68e369649 ("net/mlx5: Refactor and expand rep vport stat group")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The offending commit removed the support for all packet rate metering.
Restore the pkt rate metering support by removing the restriction.
Fixes: 3603f26633e7 ("net/mlx5e: TC, allow meter jump control action")
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The post meter table only matches on reg_c5. As such, the inner/outer
match levels are irrelevant for the match critieria. The cited patch only
sets the outer criteria to none, thus setting the inner match level for
encapsulated packets. This caused rules with police action on tunnel
devices to not find an existing flow group for the match criteria, thus
failing to offload the rule.
Set both the inner and outer match levels to none for post_meter rules.
Fixes: 0d8c38d44f33 ("net/mlx5e: TC, init post meter rules with branching attributes")
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The current code always does the accounting using the
stats from the parent interface (linked in the rq). This
doesn't work when there are child interfaces configured.
Fix this behavior by always using the stats from the child
interface priv. This will also work for parent only
interfaces: the child (netdev) and parent netdev (rq->netdev)
will point to the same thing.
Fixes: be98737a4faa ("net/mlx5e: Use dynamic per-channel allocations in stats")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
A user is able to configure an arbitrary number of rx queues when
creating an interface via netlink. This doesn't work for child PKEY
interfaces because the child interface uses the parent receive channels.
Although the child shares the parent's receive channels, the number of
rx queues is important for the channel_stats array: the parent's rx
channel index is used to access the child's channel_stats. So the array
has to be at least as large as the parent's rx queue size for the
counting to work correctly and to prevent out of bound accesses.
This patch checks for the mentioned scenario and returns an error when
trying to create the interface. The error is propagated to the user.
Fixes: be98737a4faa ("net/mlx5e: Use dynamic per-channel allocations in stats")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
present
PKEY sub interfaces share the receive queues with the parent interface.
While setting the sub interface queue count is not supported, it is
currently possible to change the number of queues of the parent interface.
Thus we can end up with inconsistent queue sizes between the parent and its
sub interfaces.
This change disallows setting the queue count on the parent interface when
sub interfaces are present.
This is achieved by introducing an explicit reference to the parent netdev
in the mlx5i_priv of the child interface. An additional counter is also
required on the parent side to detect when sub interfaces are attached and
for proper cleanup.
The rtnl lock is taken during the ethtool op and the sub interface
ndo_init/uninit ops. There is no race here around counting the sub
interfaces, reading the sub interfaces and setting the number of
channels. The ASSERT_RTNL was added to document that.
Fixes: be98737a4faa ("net/mlx5e: Use dynamic per-channel allocations in stats")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The native NIC port net device instance is being used as Uplink
representor. While changing profiles private resources are not
available, fix features ndo does not check if the netdev is present.
Add driver protection to verify private resources are ready.
Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Command may fail while driver is reloading and can't accept FW commands
till command interface is reinitialized. Such command failure is being
logged to command stats. This results in NULL pointer access as command
stats structure is being freed and reallocated during mlx5 devlink
reload (see kernel log below).
Fix it by making command stats statically allocated on driver probe.
Kernel log:
[ 2394.808802] BUG: unable to handle kernel paging request at 000000000002a9c0
[ 2394.810610] PGD 0 P4D 0
[ 2394.811811] Oops: 0002 [#1] SMP NOPTI
...
[ 2394.815482] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0
...
[ 2394.829505] Call Trace:
[ 2394.830667] _raw_spin_lock_irq+0x23/0x26
[ 2394.831858] cmd_status_err+0x55/0x110 [mlx5_core]
[ 2394.833020] mlx5_access_reg+0xe7/0x150 [mlx5_core]
[ 2394.834175] mlx5_query_port_ptys+0x78/0xa0 [mlx5_core]
[ 2394.835337] mlx5e_ethtool_get_link_ksettings+0x74/0x590 [mlx5_core]
[ 2394.836454] ? kmem_cache_alloc_trace+0x140/0x1c0
[ 2394.837562] __rh_call_get_link_ksettings+0x33/0x100
[ 2394.838663] ? __rtnl_unlock+0x25/0x50
[ 2394.839755] __ethtool_get_link_ksettings+0x72/0x150
[ 2394.840862] duplex_show+0x6e/0xc0
[ 2394.841963] dev_attr_show+0x1c/0x40
[ 2394.843048] sysfs_kf_seq_show+0x9b/0x100
[ 2394.844123] seq_read+0x153/0x410
[ 2394.845187] vfs_read+0x91/0x140
[ 2394.846226] ksys_read+0x4f/0xb0
[ 2394.847234] do_syscall_64+0x5b/0x1a0
[ 2394.848228] entry_SYSCALL_64_after_hwframe+0x65/0xca
Fixes: 34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When offloading TC NIC rule which has mod_hdr action, the
mod_hdr actions list is freed upon mod_hdr allocation.
In the new format of handling multi table actions and CT in
particular, the mod_hdr actions list is still relevant when
setting the pre and post rules and therefore, freeing the list
may cause adding rules which don't set the FTE_ID.
Therefore, the mod_hdr actions list needs to be kept for the
pre/post flows as well and should be left for these handler to
be freed.
Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Fix attr pointer validity checks after it was already
dereferenced.
Fixes: cb0d54cbf948 ("net/mlx5e: Fix wrong source vport matching on tunnel rule")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
If the kernel configuration asks the compiler to check frame limit of 1K,
dr_rule_create_rule_nic exceed this limit:
"stack frame size (1184) exceeds limit (1024)"
Fixing this issue by checking configured frame limit and using the
optimization STE array only for cases with the usual 2K (or larger)
stack size warning.
Fixes: b9b81e1e9382 ("net/mlx5: DR, For short chains of STEs, avoid allocating ste_arr dynamically")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
|
|
This reverts commit 42666b2c452ce87894786aae05e3fad3cfc6cb59.
This chip version seems to be very rare, but it exits in consumer
devices, see linked report.
Link: https://stackoverflow.com/questions/75049473/cant-setup-a-wired-network-in-archlinux-fresh-install
Fixes: 42666b2c452c ("r8169: disable detection of chip version 36")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/42e9674c-d5d0-a65a-f578-e5c74f244739@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use NULL for NULL pointer to fix the following sparse warning:
drivers/cpufreq/armada-37xx-cpufreq.c:448:32: sparse: warning: Using plain integer as NULL pointer
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
It was determined that the do_idr_lock parameter to
bpf_prog_free_id() was not necessary as it should always be true.
Suggested-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230106154400.74211-2-paul@paul-moore.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
PERF_BPF_EVENT_PROG_UNLOAD
When changing the ebpf program put() routines to support being called
from within IRQ context the program ID was reset to zero prior to
calling the perf event and audit UNLOAD record generators, which
resulted in problems as the ebpf program ID was bogus (always zero).
This patch addresses this problem by removing an unnecessary call to
bpf_prog_free_id() in __bpf_prog_offload_destroy() and adjusting
__bpf_prog_put() to only call bpf_prog_free_id() after audit and perf
have finished their bpf program unload tasks in
bpf_prog_put_deferred(). For the record, no one can determine, or
remember, why it was necessary to free the program ID, and remove it
from the IDR, prior to executing bpf_prog_put_deferred();
regardless, both Stanislav and Alexei agree that the approach in this
patch should be safe.
It is worth noting that when moving the bpf_prog_free_id() call, the
do_idr_lock parameter was forced to true as the ebpf devs determined
this was the correct as the do_idr_lock should always be true. The
do_idr_lock parameter will be removed in a follow-up patch, but it
was kept here to keep the patch small in an effort to ease any stable
backports.
I also modified the bpf_audit_prog() logic used to associate the
AUDIT_BPF record with other associated records, e.g. @ctx != NULL.
Instead of keying off the operation, it now keys off the execution
context, e.g. '!in_irg && !irqs_disabled()', which is much more
appropriate and should help better connect the UNLOAD operations with
the associated audit state (other audit records).
Cc: stable@vger.kernel.org
Fixes: d809e134be7a ("bpf: Prepare bpf_prog_put() to be called from irq context.")
Reported-by: Burn Alting <burn.alting@iinet.net.au>
Reported-by: Jiri Olsa <olsajiri@gmail.com>
Suggested-by: Stanislav Fomichev <sdf@google.com>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230106154400.74211-1-paul@paul-moore.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The 'TCA_MPLS_LABEL' attribute is of 'NLA_U32' type, but has a
validation type of 'NLA_VALIDATE_FUNCTION'. This is an invalid
combination according to the comment above 'struct nla_policy':
"
Meaning of `validate' field, use via NLA_POLICY_VALIDATE_FN:
NLA_BINARY Validation function called for the attribute.
All other Unused - but note that it's a union
"
This can trigger the warning [1] in nla_get_range_unsigned() when
validation of the attribute fails. Despite being of 'NLA_U32' type, the
associated 'min'/'max' fields in the policy are negative as they are
aliased by the 'validate' field.
Fix by changing the attribute type to 'NLA_BINARY' which is consistent
with the above comment and all other users of NLA_POLICY_VALIDATE_FN().
As a result, move the length validation to the validation function.
No regressions in MPLS tests:
# ./tdc.py -f tc-tests/actions/mpls.json
[...]
# echo $?
0
[1]
WARNING: CPU: 0 PID: 17743 at lib/nlattr.c:118
nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
Modules linked in:
CPU: 0 PID: 17743 Comm: syz-executor.0 Not tainted 6.1.0-rc8 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014
RIP: 0010:nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
[...]
Call Trace:
<TASK>
__netlink_policy_dump_write_attr+0x23d/0x990 net/netlink/policy.c:310
netlink_policy_dump_write_attr+0x22/0x30 net/netlink/policy.c:411
netlink_ack_tlv_fill net/netlink/af_netlink.c:2454 [inline]
netlink_ack+0x546/0x760 net/netlink/af_netlink.c:2506
netlink_rcv_skb+0x1b7/0x240 net/netlink/af_netlink.c:2546
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6109
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x38f/0x500 net/socket.c:2482
___sys_sendmsg net/socket.c:2536 [inline]
__sys_sendmsg+0x197/0x230 net/socket.c:2565
__do_sys_sendmsg net/socket.c:2574 [inline]
__se_sys_sendmsg net/socket.c:2572 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2572
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Link: https://lore.kernel.org/netdev/CAO4mrfdmjvRUNbDyP0R03_DrD_eFCLCguz6OxZ2TYRSv0K9gxA@mail.gmail.com/
Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Tested-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230107171004.608436-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
User resource lookups used rcu to avoid two extra atomics. Unfortunately
the rcu paths were buggy and it was easy to make the driver crash by
submitting command buffers from two different threads. Because the
lookups never show up in performance profiles replace them with a
regular spin lock which fixes the races in accesses to those shared
resources.
Fixes kernel oops'es in IGT's vmwgfx execution_buffer stress test and
seen crashes with apps using shared resources.
Fixes: e14c02e6b699 ("drm/vmwgfx: Look up objects without taking a reference")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221207172907.959037-1-zack@kde.org
|
|
Userspace can guess the handle value and try to race GEM object creation
with handle close, resulting in a use-after-free if we dereference the
object after dropping the handle's reference. For that reason, dropping
the handle's reference must be done *after* we are done dereferencing
the object.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Fixes: 62fb7a5e1096 ("virtio-gpu: add 3d/virgl support")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216233355.542197-2-robdclark@gmail.com
|
|
We had already disabled this warning for gcc-12 due to bugs in the value
range analysis, but it turns out we end up having some similar problems
with gcc-11.3 too, so let's disable it there too.
Older gcc versions end up being increasingly less relevant, and
hopefully clang and newer version of gcc (ie gcc-13) end up working
reliably enough that we still get the build coverage even when we
disable this for some versions.
Link: https://lore.kernel.org/all/20221227002941.GA2691687@roeck-us.net/
Link: https://lore.kernel.org/all/D8BDBF66-E44C-45D4-9758-BAAA4F0C1998@kernel.org/
Cc: Kees Cook <kees@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If we don't, then we may lose access to it completely, leading to a
request leak. This will eventually stall the ring exit process as
well.
Cc: stable@vger.kernel.org
Fixes: 49f1c68e048f ("io_uring: optimise submission side poll_refs")
Reported-and-tested-by: syzbot+6c95df01470a47fc3af4@syzkaller.appspotmail.com
Link: https://lore.kernel.org/io-uring/0000000000009f829805f1ce87b2@google.com/
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
isa-rtc.c doesn't use any definition from bcd.h, remove its inclusion
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20221212135953.212303-1-alexandre.belloni@bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
