summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-16lib/test_string.c: add some testcases for strchr and strnchrPeter Rosin
Make sure that the trailing NUL is considered part of the string and can be found. Link: http://lkml.kernel.org/r/20190506124634.6807-4-peda@axentia.se Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16lib/test_string.c: avoid masking memset16/32/64 failuresPeter Rosin
If a memsetXX implementation is completely broken and fails in the first iteration, when i, j, and k are all zero, the failure is masked as zero is returned. Failing in the first iteration is perhaps the most likely failure, so this makes the tests pretty much useless. Avoid the situation by always setting a random unused bit in the result on failure. Link: http://lkml.kernel.org/r/20190506124634.6807-3-peda@axentia.se Fixes: 03270c13c5ff ("lib/string.c: add testcases for memset16/32/64") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16lib/string.c: allow searching for NUL with strnchrPeter Rosin
Patch series "lib/string: search for NUL with strchr/strnchr". I noticed an inconsistency where strchr and strnchr do not behave the same with respect to the trailing NUL. strchr is standardised and the kernel function conforms, and the kernel relies on the behavior. So, naturally strchr stays as-is and strnchr is what I change. While writing a few tests to verify that my new strnchr loop was sane, I noticed that the tests for memset16/32/64 had a problem. Since it's all about the lib/string.c file I made a short series of it all... This patch (of 3): strchr considers the terminating NUL to be part of the string, and NUL can thus be searched for with that function. For consistency, do the same with strnchr. Link: http://lkml.kernel.org/r/20190506124634.6807-2-peda@axentia.se Signed-off-by: Peter Rosin <peda@axentia.se> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16lib/list: tweak LIST_POISON2 for better code generation on x86_64Alexey Dobriyan
list_del() poisoning can generate 2 64-bit immediate loads but it also can generate one 64-bit immediate load and an addition: 48 b8 00 01 00 00 00 00 ad de movabs rax,0xdead000000000100 48 89 47 58 mov QWORD PTR [rdi+0x58],rax 48 05 00 01 00 00 <=====> add rax,0x100 48 89 47 60 mov QWORD PTR [rdi+0x60],rax However on x86_64 not all constants are equal: those within [-128, 127] range can be added with shorter "add r64, imm32" instruction: 48 b8 00 01 00 00 00 00 ad de movabs rax,0xdead000000000100 48 89 47 58 mov QWORD PTR [rdi+0x58],rax 48 83 c0 22 <======> add rax,0x22 48 89 47 60 mov QWORD PTR [rdi+0x60],rax Patch saves 2 bytes per some LIST_POISON2 usage. (Slightly disappointing) space savings on F29 x86_64 config: add/remove: 0/0 grow/shrink: 0/2164 up/down: 0/-5184 (-5184) Function old new delta zstd_get_workspace 548 546 -2 ... mlx4_delete_all_resources_for_slave 4826 4804 -22 Total: Before=83304131, After=83298947, chg -0.01% New constants are: 0xdead000000000100 0xdead000000000122 Note: LIST_POISON1 can't be changed to ...11 because something in page allocator requires low bit unset. Link: http://lkml.kernel.org/r/20190513191502.GA8492@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16get_maintainer: add ability to skip moderated mailing listsJoe Perches
Add a command line switch --no-moderated to skip L: mailing lists marked with 'moderated'. Some people prefer not emailing moderated mailing lists as the moderation time can be indeterminate and some emails can be intentionally dropped by a moderator. This can cause fragmentation of email threads when some are subscribed to a moderated list but others are not and emails are dropped. Link: http://lkml.kernel.org/r/6f23c2918ad9fc744269feb8f909bdfb105c5afc.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16asm-generic: fix a compilation warningQian Cai
Fix this compilation warning on x86 by making flush_cache_vmap() inline. lib/ioremap.c: In function 'ioremap_page_range': lib/ioremap.c:214:16: warning: variable 'start' set but not used [-Wunused-but-set-variable] unsigned long start; ^~~~~ While at it, convert all other similar functions to inline for consistency. Link: http://lkml.kernel.org/r/1562594592-15228-1-git-send-email-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16arch/*: remove unused isa_page_to_bus()Stephen Kitt
isa_page_to_bus() is deprecated and is no longer used anywhere. Remove it entirely. Link: http://lkml.kernel.org/r/20190613161155.16946-1-steve@sk2.org Signed-off-by: Stephen Kitt <steve@sk2.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16arch: replace _BITUL() in kernel-space headers with BIT()Masahiro Yamada
Now that BIT() can be used from assembly code, we can safely replace _BITUL() with equivalent BIT(). UAPI headers are still required to use _BITUL(), but there is no more reason to use it in kernel headers. BIT() is shorter. Link: http://lkml.kernel.org/r/20190609153941.17249-2-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16linux/bits.h: make BIT(), GENMASK(), and friends available in assemblyMasahiro Yamada
BIT(), GENMASK(), etc. are useful to define register bits of hardware. However, low-level code is often written in assembly, where they are not available due to the hard-coded 1UL, 0UL. In fact, in-kernel headers such as arch/arm64/include/asm/sysreg.h use _BITUL() instead of BIT() so that the register bit macros are available in assembly. Using macros in include/uapi/linux/const.h have two reasons: [1] For use in uapi headers We should use underscore-prefixed variants for user-space. [2] For use in assembly code Since _BITUL() uses UL(1) instead of 1UL, it can be used as an alternative of BIT(). For [2], it is pretty easy to change BIT() etc. for use in assembly. This allows to replace _BUTUL() in kernel-space headers with BIT(). Link: http://lkml.kernel.org/r/20190609153941.17249-1-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16kernel: fix typos and some coding style in commentsWeitao Hou
fix lenght to length Link: http://lkml.kernel.org/r/20190521050937.4370-1-houweitaoo@gmail.com Signed-off-by: Weitao Hou <houweitaoo@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16fs/proc/proc_sysctl.c: fix the default values of i_uid/i_gid on /proc/sys ↵Radoslaw Burny
inodes. Normally, the inode's i_uid/i_gid are translated relative to s_user_ns, but this is not a correct behavior for proc. Since sysctl permission check in test_perm is done against GLOBAL_ROOT_[UG]ID, it makes more sense to use these values in u_[ug]id of proc inodes. In other words: although uid/gid in the inode is not read during test_perm, the inode logically belongs to the root of the namespace. I have confirmed this with Eric Biederman at LPC and in this thread: https://lore.kernel.org/lkml/87k1kzjdff.fsf@xmission.com Consequences ============ Since the i_[ug]id values of proc nodes are not used for permissions checks, this change usually makes no functional difference. However, it causes an issue in a setup where: * a namespace container is created without root user in container - hence the i_[ug]id of proc nodes are set to INVALID_[UG]ID * container creator tries to configure it by writing /proc/sys files, e.g. writing /proc/sys/kernel/shmmax to configure shared memory limit Kernel does not allow to open an inode for writing if its i_[ug]id are invalid, making it impossible to write shmmax and thus - configure the container. Using a container with no root mapping is apparently rare, but we do use this configuration at Google. Also, we use a generic tool to configure the container limits, and the inability to write any of them causes a failure. History ======= The invalid uids/gids in inodes first appeared due to 81754357770e (fs: Update i_[ug]id_(read|write) to translate relative to s_user_ns). However, AFAIK, this did not immediately cause any issues. The inability to write to these "invalid" inodes was only caused by a later commit 0bd23d09b874 (vfs: Don't modify inodes with a uid or gid unknown to the vfs). Tested: Used a repro program that creates a user namespace without any mapping and stat'ed /proc/$PID/root/proc/sys/kernel/shmmax from outside. Before the change, it shows the overflow uid, with the change it's 0. The overflow uid indicates that the uid in the inode is not correct and thus it is not possible to open the file for writing. Link: http://lkml.kernel.org/r/20190708115130.250149-1-rburny@google.com Fixes: 0bd23d09b874 ("vfs: Don't modify inodes with a uid or gid unknown to the vfs") Signed-off-by: Radoslaw Burny <rburny@google.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Seth Forshee <seth.forshee@canonical.com> Cc: John Sperbeck <jsperbeck@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16proc: test /proc/sysvipc vs setns(CLONE_NEWIPC)Alexey Dobriyan
I thought that /proc/sysvipc has the same bug as /proc/net commit 1fde6f21d90f8ba5da3cb9c54ca991ed72696c43 proc: fix /proc/net/* after setns(2) However, it doesn't! /proc/sysvipc files do get_ipc_ns(current->nsproxy->ipc_ns); in their open() hook and avoid the problem. Keep the test, maybe /proc/sysvipc will become broken someday :-\ Link: http://lkml.kernel.org/r/20190706180146.GA21015@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16fs/proc/inode.c: use typeof_member() macroAlexey Dobriyan
Don't repeat function signatures twice. This is a kind-of-precursor for "struct proc_ops". Note: typeof(pde->proc_fops->...) ...; can't be used because ->proc_fops is "const struct file_operations *". "const" prevents assignment down the code and it can't be deleted in the type system. Link: http://lkml.kernel.org/r/20190529191110.GB5703@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16include/linux/kernel.h: add typeof_member() macroAlexey Dobriyan
Add typeof_member() macro so that types can be extracted without introducing dummy variables. Link: http://lkml.kernel.org/r/20190529190720.GA5703@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16vmcore: add a kernel parameter novmcoreddKairui Song
Since commit 2724273e8fd0 ("vmcore: add API to collect hardware dump in second kernel"), drivers are allowed to add device related dump data to vmcore as they want by using the device dump API. This has a potential issue, the data is stored in memory, drivers may append too much data and use too much memory. The vmcore is typically used in a kdump kernel which runs in a pre-reserved small chunk of memory. So as a result it will make kdump unusable at all due to OOM issues. So introduce new 'novmcoredd' command line option. User can disable device dump to reduce memory usage. This is helpful if device dump is using too much memory, disabling device dump could make sure a regular vmcore without device dump data is still available. [akpm@linux-foundation.org: tweak documentation] [akpm@linux-foundation.org: vmcore.c needs moduleparam.h] Link: http://lkml.kernel.org/r/20190528111856.7276-1-kasong@redhat.com Signed-off-by: Kairui Song <kasong@redhat.com> Acked-by: Dave Young <dyoung@redhat.com> Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com> Cc: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Cc: "David S . Miller" <davem@davemloft.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16tools/testing/selftests/proc/proc-pid-vm.c: hide "segfault at ↵Alexey Dobriyan
ffffffffff600000" dmesg spam Test tries to access vsyscall page and if it doesn't exist gets SIGSEGV which can spam into dmesg. However the segfault happens by design. Handle it and carry information via exit code to parent. Link: http://lkml.kernel.org/r/20190524181256.GA2260@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16mm: stub out all of swapops.h for !CONFIG_MMUChristoph Hellwig
The whole header file deals with swap entries and PTEs, none of which can exist for nommu builds. The current nommu ports have lots of stubs to allow the inline functions in swapops.h to compile, but as none of this functionality is actually used there is no point in even providing it. This way we don't have to provide the stubs for the upcoming RISC-V nommu port, and can eventually remove it from the existing ports. Link: http://lkml.kernel.org/r/20190703122359.18200-4-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16mm: provide a print_vma_addr stub for !CONFIG_MMUChristoph Hellwig
Link: http://lkml.kernel.org/r/20190703122359.18200-3-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16mm: fix the MAP_UNINITIALIZED flagChristoph Hellwig
We can't expose UAPI symbols differently based on CONFIG_ symbols, as userspace won't have them available. Instead always define the flag, but only respect it based on the config option. Link: http://lkml.kernel.org/r/20190703122359.18200-2-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16mm/cma.c: fail if fixed declaration can't be honoredDoug Berger
The description of cma_declare_contiguous() indicates that if the 'fixed' argument is true the reserved contiguous area must be exactly at the address of the 'base' argument. However, the function currently allows the 'base', 'size', and 'limit' arguments to be silently adjusted to meet alignment constraints. This commit enforces the documented behavior through explicit checks that return an error if the region does not fit within a specified region. Link: http://lkml.kernel.org/r/1561422051-16142-1-git-send-email-opendmb@gmail.com Fixes: 5ea3b1b2f8ad ("cma: add placement specifier for "cma=" kernel parameter") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: Yue Hu <huyue2@yulong.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16mm/z3fold.c: reinitialize zhdr structs after migrationHenry Burns
z3fold_page_migration() calls memcpy(new_zhdr, zhdr, PAGE_SIZE). However, zhdr contains fields that can't be directly coppied over (ex: list_head, a circular linked list). We only need to initialize the linked lists in new_zhdr, as z3fold_isolate_page() already ensures that these lists are empty Additionally it is possible that zhdr->work has been placed in a workqueue. In this case we shouldn't migrate the page, as zhdr->work references zhdr as opposed to new_zhdr. Link: http://lkml.kernel.org/r/20190716000520.230595-1-henryburns@google.com Fixes: 1f862989b04ade61d3 ("mm/z3fold.c: support page migration") Signed-off-by: Henry Burns <henryburns@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Vitaly Vul <vitaly.vul@sony.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Jonathan Adams <jwadams@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16mm/z3fold.c: remove z3fold_migration trylockHenry Burns
z3fold_page_migrate() will never succeed because it attempts to acquire a lock that has already been taken by migrate.c in __unmap_and_move(). __unmap_and_move() migrate.c trylock_page(oldpage) move_to_new_page(oldpage_newpage) a_ops->migrate_page(oldpage, newpage) z3fold_page_migrate(oldpage, newpage) trylock_page(oldpage) Link: http://lkml.kernel.org/r/20190710213238.91835-1-henryburns@google.com Fixes: 1f862989b04a ("mm/z3fold.c: support page migration") Signed-off-by: Henry Burns <henryburns@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Vitaly Vul <vitaly.vul@sony.com> Cc: Jonathan Adams <jwadams@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Snild Dolkow <snild@sony.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16mm/vmscan.c: add checks for incorrect handling of current->reclaim_stateAndrew Morton
Six sites are presently altering current->reclaim_state. There is a risk that one function stomps on a caller's value. Use a helper function to catch such errors. Cc: Yafang Shao <laoar.shao@gmail.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16mm/vmscan.c: calculate reclaimed slab caches in all reclaim pathsYafang Shao
There are six different reclaim paths by now: - kswapd reclaim path - node reclaim path - hibernate preallocate memory reclaim path - direct reclaim path - memcg reclaim path - memcg softlimit reclaim path The slab caches reclaimed in these paths are only calculated in the above three paths. There're some drawbacks if we don't calculate the reclaimed slab caches. - The sc->nr_reclaimed isn't correct if there're some slab caches relcaimed in this path. - The slab caches may be reclaimed thoroughly if there're lots of reclaimable slab caches and few page caches. Let's take an easy example for this case. If one memcg is full of slab caches and the limit of it is 512M, in other words there're approximately 512M slab caches in this memcg. Then the limit of the memcg is reached and the memcg reclaim begins, and then in this memcg reclaim path it will continuesly reclaim the slab caches until the sc->priority drops to 0. After this reclaim stops, you will find there're few slab caches left, which is less than 20M in my test case. While after this patch applied the number is greater than 300M and the sc->priority only drops to 3. Link: http://lkml.kernel.org/r/1561112086-6169-3-git-send-email-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16mm/vmscan.c: add a new member reclaim_state in struct shrink_controlYafang Shao
Patch series "mm/vmscan: calculate reclaimed slab in all reclaim paths". This patchset is to fix the issues in doing shrink slab. There're six different reclaim paths by now, - kswapd reclaim path - node reclaim path - hibernate preallocate memory reclaim path - direct reclaim path - memcg reclaim path - memcg softlimit reclaim path The slab caches reclaimed in these paths are only calculated in the above three paths. The issues are detailed explained in patch #2. We should calculate the reclaimed slab caches in every reclaim path. In order to do it, the struct reclaim_state is placed into the struct shrink_control. In node reclaim path, there'is another issue about shrinking slab, which is adressed in "mm/vmscan: shrink slab in node reclaim" (https://lore.kernel.org/linux-mm/1559874946-22960-1-git-send-email-laoar.shao@gmail.com/). This patch (of 2): The struct reclaim_state is used to record how many slab caches are reclaimed in one reclaim path. The struct shrink_control is used to control one reclaim path. So we'd better put reclaim_state into shrink_control. [laoar.shao@gmail.com: remove reclaim_state assignment from __perform_reclaim()] Link: http://lkml.kernel.org/r/1561381582-13697-1-git-send-email-laoar.shao@gmail.com Link: http://lkml.kernel.org/r/1561112086-6169-2-git-send-email-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16mm/memcontrol.c: keep local VM counters in sync with the hierarchical onesYafang Shao
After commit 815744d75152 ("mm: memcontrol: don't batch updates of local VM stats and events"), the local VM counter are not in sync with the hierarchical ones. Below is one example in a leaf memcg on my server (with 8 CPUs): inactive_file 3567570944 total_inactive_file 3568029696 We find that the deviation is very great because the 'val' in __mod_memcg_state() is in pages while the effective value in memcg_stat_show() is in bytes. So the maximum of this deviation between local VM stats and total VM stats can be (32 * number_of_cpu * PAGE_SIZE), that may be an unacceptably great value. We should keep the local VM stats in sync with the total stats. In order to keep this behavior the same across counters, this patch updates __mod_lruvec_state() and __count_memcg_events() as well. Link: http://lkml.kernel.org/r/1562851979-10610-1-git-send-email-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yafang Shao <shaoyafang@didiglobal.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16mm/z3fold.c: allow __GFP_HIGHMEM in z3fold_allocHenry Burns
One of the gfp flags used to show that a page is movable is __GFP_HIGHMEM. Currently z3fold_alloc() fails when __GFP_HIGHMEM is passed. Now that z3fold pages are movable, we allow __GFP_HIGHMEM. We strip the movability related flags from the call to kmem_cache_alloc() for our slots since it is a kernel allocation. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20190712222118.108192-1-henryburns@google.com Signed-off-by: Henry Burns <henryburns@google.com> Acked-by: Vitaly Wool <vitalywool@gmail.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16mm/cma.c: fix a typo ("alloc_cma" -> "cma_alloc") in cma_release() commentsRyohei Suzuki
A comment referred to a non-existent function alloc_cma(), which should have been cma_alloc(). Link: http://lkml.kernel.org/r/20190712085549.5920-1-ryh.szk.cmnty@gmail.com Signed-off-by: Ryohei Suzuki <ryh.szk.cmnty@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16mm/slab_common.c: work around clang bug #42570Arnd Bergmann
Clang gets rather confused about two variables in the same special section when one of them is not initialized, leading to an assembler warning later: /tmp/slab_common-18f869.s: Assembler messages: /tmp/slab_common-18f869.s:7526: Warning: ignoring changed section attributes for .data..ro_after_init Adding an initialization to kmalloc_caches is rather silly here but does avoid the issue. Link: https://bugs.llvm.org/show_bug.cgi?id=42570 Link: http://lkml.kernel.org/r/20190712090455.266021-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16lib/mpi/longlong.h: fix building with 32-bit x86Arnd Bergmann
The mpi library contains some rather old inline assembly statements that produce a lot of warnings for 32-bit x86, such as: lib/mpi/mpih-div.c:76:16: error: invalid use of a cast in a inline asm context requiring an l-value: remove the cast or build with -fheinous-gnu-extensions udiv_qrnnd(qp[i], n1, n1, np[i], d); ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~ lib/mpi/longlong.h:423:20: note: expanded from macro 'udiv_qrnnd' : "=a" ((USItype)(q)), \ ~~~~~~~~~~^~ There is no point in doing a type cast for the output of an inline assembler statement, so just remove the cast here, as we have done for other architectures in the past. See also dea632cadd12 ("lib/mpi: fix build with clang"). Link: http://lkml.kernel.org/r/20190712090740.340186-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16mm/shmem.c: fix unused shmem_parse_huge() function warningArnd Bergmann
When CONFIG_SYSFS is disabled but CONFIG_TMPFS is enabled, we get a warning about shmem_parse_huge() never being called: mm/shmem.c:417:12: error: unused function 'shmem_parse_huge' [-Werror,-Wunused-function] static int shmem_parse_huge(const char *str) Change the #ifdef so we no longer build this function in that configuration. Link: http://lkml.kernel.org/r/20190712091141.673355-1-arnd@arndb.de Fixes: 144df3b288c4 ("vfs: Convert ramfs, shmem, tmpfs, devtmpfs, rootfs to use the new mount API") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Hugh Dickins <hughd@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16mm/z3fold: don't try to use buddy slots after freeVitaly Wool
As reported by Henry Burns: Running z3fold stress testing with address sanitization showed zhdr->slots was being used after it was freed. z3fold_free(z3fold_pool, handle) free_handle(handle) kmem_cache_free(pool->c_handle, zhdr->slots) release_z3fold_page_locked_list(kref) __release_z3fold_page(zhdr, true) zhdr_to_pool(zhdr) slots_to_pool(zhdr->slots) *BOOM* To fix this, add pointer to the pool back to z3fold_header and modify zhdr_to_pool to return zhdr->pool. Link: http://lkml.kernel.org/r/20190708134808.e89f3bfadd9f6ffd7eff9ba9@gmail.com Fixes: 7c2b8baa61fe ("mm/z3fold.c: add structure for buddy handles") Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Reported-by: Henry Burns <henryburns@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Jonathan Adams <jwadams@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16selftests/bpf: fix perf_buffer on s390Ilya Leoshkevich
perf_buffer test fails for exactly the same reason test_attach_probe used to fail: different nanosleep syscall kprobe name. Reuse the test_attach_probe fix. Fixes: ee5cf82ce04a ("selftests/bpf: test perf buffer API") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-16selftests/bpf: structure test_{progs, maps, verifier} test runners uniformlyAndrii Nakryiko
It's easier to follow the logic if it's structured the same. There is just slight difference between test_progs/test_maps and test_verifier. test_verifier's verifier/*.c files are not really compilable C files (they are more of include headers), so they can't be specified as explicit dependencies of test_verifier. Cc: Alexei Starovoitov <ast@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-16selftests/bpf: fix test_verifier/test_maps make dependenciesAndrii Nakryiko
e46fc22e60a4 ("selftests/bpf: make directory prerequisites order-only") exposed existing problem in Makefile for test_verifier and test_maps tests: their dependency on auto-generated header file with a list of all tests wasn't recorded explicitly. This patch fixes these issues. Fixes: 51a0e301a563 ("bpf: Add BPF_MAP_TYPE_SK_STORAGE test to test_maps") Fixes: 6b7b6995c43e ("selftests: bpf: tests.h should depend on .c files, not the output") Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Stanislav Fomichev <sdf@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-17builddeb: generate multi-arch friendly linux-libc-dev packageCedric Hombourger
Debian-based distributions place libc header files in a machine specific directory (/usr/include/<libc-machine>) instead of /usr/include/asm to support installation of the linux-libc-dev package from multiple architectures. Move headers installed by "make headers_install" accordingly using Debian's tuple from dpkg-architecture (stored in debian/arch). Signed-off-by: Cedric Hombourger <Cedric_Hombourger@mentor.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-17kconfig: run olddefconfig instead of oldconfig after merging fragmentsMasahiro Yamada
'make olddefconfig' is non-interactive, so we can drop 'yes'. The behavior is equivalent. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-17riscv: drop unneeded -Wall additionMasahiro Yamada
The top level Makefile adds -Wall globally: KBUILD_CFLAGS := -Wall -Wundef -Werror=strict-prototypes -Wno-trigraphs \ For riscv, I see two "-Wall" added for compiling each object. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-17memory: ti-emif-sram: move driver-specific asm-offset.h to drivers/memory/Masahiro Yamada
<generated/ti-emif-asm-offsets.h> is only generated and included by drivers/memory/, so it does not need to reside in the globally visible include/generated/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
2019-07-17MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACEThomas Hellstrom
Alok Kataria will be handing over VMware's maintainership of these interfaces to Thomas Hellström, with pv-drivers as backup contact. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Alok Kataria <akataria@vmware.com> Acked-by: Juergen Gross <jgross@suse.com> Link: https://lkml.kernel.org/r/20190328120558.29897-1-thellstrom@vmware.com
2019-07-17x86/process: Delete useless check for dead process with LDTJann Horn
At release_thread(), ->mm is NULL; and it is fine for the former mm to still have an LDT. Delete this check in process_64.c, similar to commit 2684927c6b93 ("[PATCH] x86: Deprecate useless bug"), which did the same in process_32.c. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190712224152.13129-1-jannh@google.com
2019-07-17x86: math-emu: Hide clang warnings for 16-bit overflowArnd Bergmann
clang warns about a few parts of the math-emu implementation where a 16-bit integer becomes negative during assignment: arch/x86/math-emu/poly_tan.c:88:35: error: implicit conversion from 'int' to 'short' changes value from 49216 to -16320 [-Werror,-Wconstant-conversion] (0x41 + EXTENDED_Ebias) | SIGN_Negative); ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~ arch/x86/math-emu/fpu_emu.h:180:58: note: expanded from macro 'setexponent16' #define setexponent16(x,y) { (*(short *)&((x)->exp)) = (y); } ~ ^ arch/x86/math-emu/reg_constant.c:37:32: error: implicit conversion from 'int' to 'short' changes value from 49085 to -16451 [-Werror,-Wconstant-conversion] FPU_REG const CONST_PI2extra = MAKE_REG(NEG, -66, ^~~~~~~~~~~~~~~~~~ arch/x86/math-emu/reg_constant.c:21:25: note: expanded from macro 'MAKE_REG' ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) } ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ arch/x86/math-emu/reg_constant.c:48:28: error: implicit conversion from 'int' to 'short' changes value from 65535 to -1 [-Werror,-Wconstant-conversion] FPU_REG const CONST_QNaN = MAKE_REG(NEG, EXP_OVER, 0x00000000, 0xC0000000); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/x86/math-emu/reg_constant.c:21:25: note: expanded from macro 'MAKE_REG' ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) } ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ The code is correct as is, so add a typecast to shut up the warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190712090816.350668-1-arnd@arndb.de
2019-07-16Merge tag 'for-linus-5.3-ofs1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux Pull orangefs updates from Mike Marshall: "Two small fixes. This is just a fix for an unused value that Colin King sent me and a related fix I added" * tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: orangefs: eliminate needless variable assignments orangefs: remove redundant assignment to variable buffer_index
2019-07-16Merge tag 'for-5.3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs updates from David Sterba: "Highlights: - chunks that have been trimmed and unchanged since last mount are tracked and skipped on repeated trims - use hw assissed crc32c on more arches, speedups if native instructions or optimized implementation is available - the RAID56 incompat bit is automatically removed when the last block group of that type is removed Fixes: - fsync fix for reflink on NODATACOW files that could lead to ENOSPC - fix data loss after inode eviction, renaming it, and fsync it - fix fsync not persisting dentry deletions due to inode evictions - update ctime/mtime/iversion after hole punching - fix compression type validation (reported by KASAN) - send won't be allowed to start when relocation is in progress, this can cause spurious errors or produce incorrect send stream Core: - new tracepoints for space update - tree-checker: better check for end of extents for some tree items - preparatory work for more checksum algorithms - run delayed iput at unlink time and don't push the work to cleaner thread where it's not properly throttled - wrap block mapping to structures and helpers, base for further refactoring - split large files, part 1: - space info handling - block group reservations - delayed refs - delayed allocation - other cleanups and refactoring" * tag 'for-5.3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (103 commits) btrfs: fix memory leak of path on error return path btrfs: move the subvolume reservation stuff out of extent-tree.c btrfs: migrate the delalloc space stuff to it's own home btrfs: migrate btrfs_trans_release_chunk_metadata btrfs: migrate the delayed refs rsv code btrfs: Evaluate io_tree in find_lock_delalloc_range() btrfs: migrate the global_block_rsv helpers to block-rsv.c btrfs: migrate the block-rsv code to block-rsv.c btrfs: stop using block_rsv_release_bytes everywhere btrfs: cleanup the target logic in __btrfs_block_rsv_release btrfs: export __btrfs_block_rsv_release btrfs: export btrfs_block_rsv_add_bytes btrfs: move btrfs_block_rsv definitions into it's own header btrfs: Simplify update of space_info in __reserve_metadata_bytes() btrfs: unexport can_overcommit btrfs: move reserve_metadata_bytes and supporting code to space-info.c btrfs: move dump_space_info to space-info.c btrfs: export block_rsv_use_bytes btrfs: move btrfs_space_info_add_*_bytes to space-info.c btrfs: move the space info update macro to space-info.h ...
2019-07-16Merge tag 'arc-5.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: - long due rewrite of do_page_fault - refactoring of entry/exit code to utilize the double load/store instructions - hsdk platform updates * tag 'arc-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [plat-hsdk]: Enable AXI DW DMAC in defconfig ARC: [plat-hsdk]: enable DW SPI controller ARC: hide unused function unw_hdr_alloc ARC: [haps] Add Virtio support ARCv2: entry: simplify return to Delay Slot via interrupt ARC: entry: EV_Trap expects r10 (vs. r9) to have exception cause ARCv2: entry: rewrite to enable use of double load/stores LDD/STD ARCv2: entry: avoid a branch ARCv2: entry: push out the Z flag unclobber from common EXCEPTION_PROLOGUE ARCv2: entry: comments about hardware auto-save on taken interrupts ARC: mm: do_page_fault refactor #8: release mmap_sem sooner ARC: mm: do_page_fault refactor #7: fold the various error handling ARC: mm: do_page_fault refactor #6: error handlers to use same pattern ARC: mm: do_page_fault refactor #5: scoot no_context to end ARC: mm: do_page_fault refactor #4: consolidate retry related logic ARC: mm: do_page_fault refactor #3: tidyup vma access permission code ARC: mm: do_page_fault refactor #2: remove short lived variable ARC: mm: do_page_fault refactor #1: remove label @good_area
2019-07-16fix: taprio: Change type of txtime-delay parameter to u32Vedang Patel
During the review of the iproute2 patches for txtime-assist mode, it was pointed out that it does not make sense for the txtime-delay parameter to be negative. So, change the type of the parameter from s32 to u32. Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-16x86/e820: Use proper booleans instead of 0/1Yi Wang
This fixes the following coccinelle warning: ./arch/x86/kernel/e820.c:89:9-10: WARNING: return of 0/1 in function '_e820__mapped_any' with return type bool Return type bool instead of 0/1. Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1563158829-44373-1-git-send-email-wang.yi59@zte.com.cn
2019-07-16x86/apic: Silence -Wtype-limits compiler warningsQian Cai
There are many compiler warnings like this, In file included from ./arch/x86/include/asm/smp.h:13, from ./arch/x86/include/asm/mmzone_64.h:11, from ./arch/x86/include/asm/mmzone.h:5, from ./include/linux/mmzone.h:969, from ./include/linux/gfp.h:6, from ./include/linux/mm.h:10, from arch/x86/kernel/apic/io_apic.c:34: arch/x86/kernel/apic/io_apic.c: In function 'check_timer': ./arch/x86/include/asm/apic.h:37:11: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] if ((v) <= apic_verbosity) \ ^~ arch/x86/kernel/apic/io_apic.c:2160:2: note: in expansion of macro 'apic_printk' apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X " ^~~~~~~~~~~ ./arch/x86/include/asm/apic.h:37:11: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] if ((v) <= apic_verbosity) \ ^~ arch/x86/kernel/apic/io_apic.c:2207:4: note: in expansion of macro 'apic_printk' apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: " ^~~~~~~~~~~ APIC_QUIET is 0, so silence them by making apic_verbosity type int. Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1562621805-24789-1-git-send-email-cai@lca.pw
2019-07-16x86/mm: Free sme_early_buffer after initDavid Rientjes
The contents of sme_early_buffer should be cleared after __sme_early_enc_dec() because it is used to move encrypted and decrypted data, but since __sme_early_enc_dec() is __init this buffer simply can be freed after init. This saves a page that is otherwise unreferenced after init. Reported-by: Cfir Cohen <cfir@google.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907101318170.197432@chino.kir.corp.google.com
2019-07-16x86/boot: Fix memory leak in default_get_smp_config()David Rientjes
When default_get_smp_config() is called with early == 1 and mpf->feature1 is non-zero, mpf is leaked because the return path does not do early_memunmap(). Fix this and share a common exit routine. Fixes: 5997efb96756 ("x86/boot: Use memremap() to map the MPF and MPC data") Reported-by: Cfir Cohen <cfir@google.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907091942570.28240@chino.kir.corp.google.com