summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-07-08Input: himax_hx83112b - implement MCU register readingFelix Kaechele
Implement reading from the MCU in a more universal fashion. This allows properly handling reads of more than 4 bytes using the AHB FIFO implemented in the chip. Signed-off-by: Felix Kaechele <felix@kaechele.ca> Link: https://lore.kernel.org/r/20240620145019.156187-4-felix@kaechele.ca Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-07-08Input: himax_hx83112b - use more descriptive register definesFelix Kaechele
Himax uses an AHB-style bus to communicate with different parts of the display driver and touch controller system. Use more descriptive names for the register and address defines. The names were taken from a driver submission for the similar HX83102J chip. Signed-off-by: Felix Kaechele <felix@kaechele.ca> Link: https://lore.kernel.org/all/TY0PR06MB561105A3386E9D76F429110D9E0F2@TY0PR06MB5611.apcprd06.prod.outlook.com/ Link: https://lore.kernel.org/r/20240620145019.156187-3-felix@kaechele.ca Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-07-08dt-bindings: input: touchscreen: himax,hx83112b: add HX83100AFelix Kaechele
Add a compatible string for the Himax HX83100A touch controller. The HX83100A presents touch events on the internal bus rather than offering a dedicated event register like the other chips in this family do. Signed-off-by: Felix Kaechele <felix@kaechele.ca> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240620145019.156187-2-felix@kaechele.ca Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-07-08Input: do not check number of events in input_pass_values()Dmitry Torokhov
Now that the input_dev->vals array is always there we can be assured that input_pass_values() is always called with a non-0 number of events. Remove the check. Reviewed-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Benjamin Tissoires <bentiss@kernel.org> Link: https://lore.kernel.org/r/20240703213756.3375978-8-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-07-08Input: preallocate memory to hold event valuesDmitry Torokhov
Preallocate memory for holding event values (input_dev->vals) so that there is no need to check if it was allocated or not in the event processing code. The amount of memory will be adjusted after input device has been fully set up upon registering device with the input core. Reviewed-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Benjamin Tissoires <bentiss@kernel.org> Link: https://lore.kernel.org/r/20240703213756.3375978-7-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-07-08Input: rearrange input_alloc_device() to prepare for preallocating of valsDmitry Torokhov
In preparation to have dev->vals memory pre-allocated rearrange code in input_alloc_device() so that it allows handling multiple points of failure. Reviewed-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Benjamin Tissoires <bentiss@kernel.org> Link: https://lore.kernel.org/r/20240703213756.3375978-6-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-07-08Input: simplify event handling logicDmitry Torokhov
Streamline event handling code by providing batch implementations for filtering and event processing and using them in place of the main event handler, as needed, instead of having complex branching logic in the middle of the event processing code. Reviewed-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Benjamin Tissoires <bentiss@kernel.org> Link: https://lore.kernel.org/r/20240703213756.3375978-5-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-07-08Input: make events() method return number of events processedDmitry Torokhov
In preparation to consolidating filtering and event processing in the input core change events() method to return number of events processed by it. Reviewed-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Benjamin Tissoires <bentiss@kernel.org> Link: https://lore.kernel.org/r/20240703213756.3375978-4-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-07-08Input: make sure input handlers define only one processing methodDmitry Torokhov
Input core expects input handlers to be either filters, or regular handlers, but not both. Additionally, for regular handlers it does not make sense to define both single event method and batch method. Refuse registering handler if it defines more than one method. Reviewed-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Benjamin Tissoires <bentiss@kernel.org> Link: https://lore.kernel.org/r/20240703213756.3375978-3-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-07-08Input: evdev - remove ->event() methodDmitry Torokhov
Input core favors ->events() (batch) method over ->event() method if the former is defined, so there is no point in defining evdev_event() as it is never called. Remove it. Reviewed-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Benjamin Tissoires <bentiss@kernel.org> Link: https://lore.kernel.org/r/20240703213756.3375978-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-07-08Input: imagis - add supports for Imagis IST3038Raymond Hackley
Imagis IST3038 is another variant of Imagis IST3038 IC, which has a different register interface from IST3038C (possibly firmware defined). Unlike IST3038C/IST3032C, IST3038 has different registers for commands, which means IST3038 doesn't use protocol B. Similar to IST3032C and maybe the other variants, IST3038 has touch keys support, which provides KEY_APPSELECT and KEY_BACK. Add support for IST3038 with touch keys. Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com> Link: https://lore.kernel.org/r/20240613025631.5425-4-raymondhackley@protonmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-07-08dt-bindings: input/touchscreen: imagis: Document ist3038Raymond Hackley
Imagis IST3038 is a variant of Imagis touchscreen IC. Document it in imagis,ist3038c bindings. Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240613025631.5425-3-raymondhackley@protonmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-07-08Input: imagis - clarify the usage of protocol_bRaymond Hackley
protocol_b is a property, which tells Imagis panel to use a different format for coordinates. IST30XXC series is known for using protocol B, while the other series aren't. Note this could be confusing, unlike the model name implies. Adjust the usage of protocol_b to avoid confusion. Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com> Link: https://lore.kernel.org/r/20240613025631.5425-2-raymondhackley@protonmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-07-09i2c: rcar: bring hardware to known state when probingWolfram Sang
When probing, the hardware is not brought into a known state. This may be a problem when a hypervisor restarts Linux without resetting the hardware, leaving an old state running. Make sure the hardware gets initialized, especially interrupts should be cleared and disabled. Reported-by: Dirk Behme <dirk.behme@de.bosch.com> Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Closes: https://lore.kernel.org/r/20240702045535.2000393-1-dirk.behme@de.bosch.com Fixes: 6ccbe607132b ("i2c: add Renesas R-Car I2C driver") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-07-09i2c: mt7621: Add Airoha EN7581 i2c supportLorenzo Bianconi
Introduce i2c support to Airoha EN7581 SoC through the i2c-mt7621 driver. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Ray Liu <ray.liu@airoha.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-07-09i2c: designware: Constify read-only struct regmap_configJavier Carrasco
`bt1_i2c_cfg` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-07-09i2c: xiic: improve error message when transfer fails to startMarc Ferland
xiic_start_xfer can fail for different reasons: - EBUSY: bus is busy or i2c messages still in tx_msg or rx_msg - ETIMEDOUT: timed-out trying to clear the RX fifo - EINVAL: wrong clock settings Both EINVAL and ETIMEDOUT will currently print a specific error message followed by a generic one, for example: Failed to clear rx fifo Error xiic_start_xfer however EBUSY will simply output the generic message: Error xiic_start_xfer which is not really helpful. This commit adds a new error message when a busy condition is detected and also removes the generic message since it does not provide any relevant information to the user. Signed-off-by: Marc Ferland <marc.ferland@sonatest.com> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-07-09dt-bindings: i2c: nxp,lpc1788-i2c: convert to dt schemaKanak Shilledar
Convert the NXP I2C controller for LPC2xxx/178x/18xx/43xx to newer DT schema. Created DT schema based on the .txt file which had `compatible`, `reg`, `interrupts`, `clocks`, `#address-cells` and `#size-cells` as required properties. Additional changes to the original .txt binding - added maintainer from the MAINTAINERS file. - added resets property required by the corresponding DTS files. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Kanak Shilledar <kanakshilledar@gmail.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-07-09dt-bindings: i2c: adjust indentation in DTS example to coding styleKrzysztof Kozlowski
Bindings coding style expects 2- or 4-space indentation in the DTS example. Correct files having something odd (6- or 8-space) to 4-space while re-ordering few properties according to DTS coding style (the first property should be compatible, then reg/ranges). No functional impact. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-07-09dt-bindings: i2c: ti,omap4: reference i2c-controller.yaml schemaKrzysztof Kozlowski
Reference the core I2C controller schema to properly define common properties. This allows to drop several (now redundant) properties. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-07-09dt-bindings: i2c: samsung,s3c2410: drop unneeded address/size-cellsKrzysztof Kozlowski
The reference i2c-controller.yaml already defines 'address-cells' and 'size-cells', so drop them from list of properties. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-07-09dt-bindings: i2c: nvidia,tegra20: drop unneeded address/size-cellsKrzysztof Kozlowski
The reference i2c-controller.yaml already defines 'address-cells' and 'size-cells', so drop them from list of properties. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-07-09dt-bindings: i2c: atmel,at91sam: drop unneeded address/size-cellsKrzysztof Kozlowski
The reference i2c-controller.yaml already defines 'address-cells' and 'size-cells', so drop them from list of properties. Drop them as well from required properties, even though i2c-controller.yaml does not require them, because I2C controller could be enabled without any children in DTS for user-space usage. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-07-09i2c: omap: wakeup the controller during suspend() callbackThomas Richard
A device may need the controller up during suspend_noirq() or resume_noirq(). But if the controller is autosuspended, there is no way to wakeup it during suspend_noirq() or resume_noirq() because runtime pm is disabled at this time. The suspend() callback wakes up the controller, so it is available until its suspend_noirq() callback (pm_runtime_force_suspend()). During the resume, it's restored by resume_noirq() callback (pm_runtime_force_resume()). Then resume() callback enables autosuspend. So the controller is up during a little time slot in suspend and resume sequences even if it's not used. Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-07-09i2c: omap: switch to NOIRQ_SYSTEM_SLEEP_PM_OPS() and RUNTIME_PM_OPS()Thomas Richard
Replace SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS() by NOIRQ_SYSTEM_SLEEP_PM_OPS() and RUNTIME_PM_OPS(). The usage of pm_ptr() and these more recent macros allows the compiler to see and drop the dead code. The unnecessary '__maybe_unused' annotations on PM functions can be removed. Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-07-09i2c: add missing MODULE_DESCRIPTION() macrosJeff Johnson
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/i2c/busses/i2c-ccgx-ucsi.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/i2c/busses/i2c-ali1563.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/i2c/busses/i2c-pxa.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/i2c/busses/i2c-qup.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-07-09i2c: i801: Add support for Intel Arrow Lake-HJarkko Nikula
Add SMBus PCI ID on Intel Arrow Lake-H. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-07-09arm64: dts: rockchip: Add Xunlong Orange Pi 3BJonas Karlman
The Xunlong Orange Pi 3B is a single-board computer based on the Rockchip RK3566 SoC. Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20240626230319.1425316-3-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-07-09dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3BJonas Karlman
Add devicetree binding for the Xunlong Orange Pi 3B board. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240626230319.1425316-2-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-07-09arm64: dts: rockchip: Add Radxa ROCK 3BJonas Karlman
The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community version based on the RK3568 SoC and an industrial version based on the RK3568J SoC. Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20240627211737.1985549-3-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-07-09dt-bindings: arm: rockchip: Add Radxa ROCK 3BJonas Karlman
Add devicetree binding documentation for the Radxa ROCK 3B board. The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community version based on the RK3568 SoC and an industrial version based on the RK3568J SoC. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240627211737.1985549-2-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-07-08clk: en7523: fix rate divider for slic and spi clocksLorenzo Bianconi
Introduce div_offset field in en_clk_desc struct in order to fix rate divider estimation in en7523_get_div routine for slic and spi fixed rate clocks. Moreover, fix base_shift for crypto clock. Fixes: 1e6273179190 ("clk: en7523: Add clock driver for Airoha EN7523 SoC") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/c491bdea05d847f1f1294b94f14725d292eb95d0.1718615934.git.lorenzo@kernel.org Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-07-08of/irq: Disable "interrupt-map" parsing for PASEMI NemoMarc Zyngier
Once again, we've broken PASEMI Nemo boards with its incomplete "interrupt-map" translations. Commit 935df1bd40d4 ("of/irq: Factor out parsing of interrupt-map parent phandle+args from of_irq_parse_raw()") changed the behavior resulting in the existing work-around not taking effect. Rework the work-around to just skip parsing "interrupt-map" up front by using the of_irq_imap_abusers list. Fixes: 935df1bd40d4 ("of/irq: Factor out parsing of interrupt-map parent phandle+args from of_irq_parse_raw()") Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/86ed8ba2sp.wl-maz@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-07-08Merge tag 'perf-tools-fixes-for-v6.10-2024-07-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Namhyung Kim: "Fix performance issue for v6.10 These address the performance issues reported by Matt, Namhyung and Linus. Recently perf changed the processing of the comm string and DSO using sorted arrays but this caused it to sort the array whenever adding a new entry. This caused a performance issue and the fix is to enhance the sorting by finding the insertion point in the sorted array and to shift righthand side using memmove()" * tag 'perf-tools-fixes-for-v6.10-2024-07-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: perf dsos: When adding a dso into sorted dsos maintain the sort order perf comm str: Avoid sort during insert
2024-07-08selftests/bpf: Extend tcx tests to cover late tcx_entry releaseDaniel Borkmann
Add a test case which replaces an active ingress qdisc while keeping the miniq in-tact during the transition period to the new clsact qdisc. # ./vmtest.sh -- ./test_progs -t tc_link [...] ./test_progs -t tc_link [ 3.412871] bpf_testmod: loading out-of-tree module taints kernel. [ 3.413343] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel #332 tc_links_after:OK #333 tc_links_append:OK #334 tc_links_basic:OK #335 tc_links_before:OK #336 tc_links_chain_classic:OK #337 tc_links_chain_mixed:OK #338 tc_links_dev_chain0:OK #339 tc_links_dev_cleanup:OK #340 tc_links_dev_mixed:OK #341 tc_links_ingress:OK #342 tc_links_invalid:OK #343 tc_links_prepend:OK #344 tc_links_replace:OK #345 tc_links_revision:OK Summary: 14/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20240708133130.11609-2-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-07-08bpf: Fix too early release of tcx_entryDaniel Borkmann
Pedro Pinto and later independently also Hyunwoo Kim and Wongi Lee reported an issue that the tcx_entry can be released too early leading to a use after free (UAF) when an active old-style ingress or clsact qdisc with a shared tc block is later replaced by another ingress or clsact instance. Essentially, the sequence to trigger the UAF (one example) can be as follows: 1. A network namespace is created 2. An ingress qdisc is created. This allocates a tcx_entry, and &tcx_entry->miniq is stored in the qdisc's miniqp->p_miniq. At the same time, a tcf block with index 1 is created. 3. chain0 is attached to the tcf block. chain0 must be connected to the block linked to the ingress qdisc to later reach the function tcf_chain0_head_change_cb_del() which triggers the UAF. 4. Create and graft a clsact qdisc. This causes the ingress qdisc created in step 1 to be removed, thus freeing the previously linked tcx_entry: rtnetlink_rcv_msg() => tc_modify_qdisc() => qdisc_create() => clsact_init() [a] => qdisc_graft() => qdisc_destroy() => __qdisc_destroy() => ingress_destroy() [b] => tcx_entry_free() => kfree_rcu() // tcx_entry freed 5. Finally, the network namespace is closed. This registers the cleanup_net worker, and during the process of releasing the remaining clsact qdisc, it accesses the tcx_entry that was already freed in step 4, causing the UAF to occur: cleanup_net() => ops_exit_list() => default_device_exit_batch() => unregister_netdevice_many() => unregister_netdevice_many_notify() => dev_shutdown() => qdisc_put() => clsact_destroy() [c] => tcf_block_put_ext() => tcf_chain0_head_change_cb_del() => tcf_chain_head_change_item() => clsact_chain_head_change() => mini_qdisc_pair_swap() // UAF There are also other variants, the gist is to add an ingress (or clsact) qdisc with a specific shared block, then to replace that qdisc, waiting for the tcx_entry kfree_rcu() to be executed and subsequently accessing the current active qdisc's miniq one way or another. The correct fix is to turn the miniq_active boolean into a counter. What can be observed, at step 2 above, the counter transitions from 0->1, at step [a] from 1->2 (in order for the miniq object to remain active during the replacement), then in [b] from 2->1 and finally [c] 1->0 with the eventual release. The reference counter in general ranges from [0,2] and it does not need to be atomic since all access to the counter is protected by the rtnl mutex. With this in place, there is no longer a UAF happening and the tcx_entry is freed at the correct time. Fixes: e420bed02507 ("bpf: Add fd-based tcx multi-prog infra with link support") Reported-by: Pedro Pinto <xten@osec.io> Co-developed-by: Pedro Pinto <xten@osec.io> Signed-off-by: Pedro Pinto <xten@osec.io> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Hyunwoo Kim <v4bel@theori.io> Cc: Wongi Lee <qwerty@theori.io> Cc: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20240708133130.11609-1-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-07-08selftests: net: ksft: interrupt cleanly on KeyboardInterruptJakub Kicinski
It's very useful to be able to interrupt the tests during development. Detect KeyboardInterrupt, run the cleanups and exit. Link: https://patch.msgid.link/20240705015222.675840-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-08drm/amdgpu: set CP_HQD_PQ_DOORBELL_CONTROL.DOORBELL_MODE to 1Zhigang Luo
to avoid reading wrong WPTR from doorbell in sriov vf, set CP_HQD_PQ_DOORBELL_CONTROL.DOORBELL_MODE to 1 to read WPTR from MQD. Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com> Acked-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-08Documentation/amdgpu: Clarify MI200 and MI300 entriesKent Russell
Add "Series" to MI200 and MI300 to clarify that they represent the series of cards, and to more closely match the product information materials. This also matches other entries in this list Also correct a typo in the MI300 codename (Vangaram->Vanjaram) Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-08drm/amdgpu: add ras event state device attribute supportYang Wang
add amdgpu ras 'event_state' sysfs device attribute support Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-08drm/amd/swsmu: enable more Pstates profile levels for SMU v14.0.0 and v14.0.1Li Ma
V1: This patch enables following UMD stable Pstates profile levels for power_dpm_force_performance_level interface. - profile_peak - profile_min_mclk - profile_min_sclk - profile_standard V2: Fix conflict with commit "drm/amd/pm: smu v14.0.4 reuse smu v14.0.0 dpmtable " V3: Add VCLK1 and DCLK1 support for SMU V14.0.1 And avoid to set VCLK1 and DCLK1 for SMU v14.0.0 Signed-off-by: Li Ma <li.ma@amd.com> Reviewed-by: Tim Huang <tim.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-08drm/amdgpu: add ras POSION_CONSUMPTION event id supportYang Wang
add amdgpu ras POSION_CONSUMPTION event id support. Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-08drm/amdkfd: Use mode1 reset for GFX v9.4.4Stanley.Yang
GFX v9.4.4 uses mode1 reset to handle poison consumption. Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-08drm/amdgpu: add ras POSION_CREATION event id supportYang Wang
add amdgpu ras POSION_CREATION event id support. Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-08drm/amdgpu: refine amdgpu ras event id core codeYang Wang
v1: - use unified event id to manage ras events - add a new function amdgpu_ras_query_error_status_with_event() to accept event type as parameter. v2: add a warn log to show the location of function failure when calling amdgpu_ras_mark_event(). (Tao Zhou) v3: change RAS_EVENT_TYPE_ISR to RAS_EVENT_TYPE_FATAL. v4: rename amdgpu_ras_get_recovery_event() to amdgpu_ras_get_fatal_error_event(). Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-08drm/amd/display: Solve mst monitors blank out problem after resumeWayne Lin
[Why] In dm resume, we firstly restore dc state and do the mst resume for topology probing thereafter. If we change dpcd DP_MSTM_CTRL value after LT in mst reume, it will cause light up problem on the hub. [How] Revert commit 202dc359adda ("drm/amd/display: Defer handling mst up request in resume"). And adjust the reason to trigger dc_link_detect by DETECT_REASON_RESUMEFROMS3S4. Cc: stable@vger.kernel.org Fixes: 202dc359adda ("drm/amd/display: Defer handling mst up request in resume") Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-08drm/amdgpu: reject gang submit on reserved VMIDsChristian König
A gang submit won't work if the VMID is reserved and we can't flush out VM changes from multiple engines at the same time. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-08drm/amdgpu: enable dpg for vcn and jpeg on GC 11_5_2Saleemkhan Jamadar
DPG mode is enabled for vcn and jpeg on VCN v4_0_5 Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Reviewed-by: Tim Huang <tim.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-08drm/amdgpu: remove redundant semicolons in RAS_EVENT_LOGYang Wang
remove redundant semicolons in RAS_EVENT_LOG to avoid code format check warning. Fixes: b712d7c20133 ("drm/amdgpu: fix compiler 'side-effect' check issue for RAS_EVENT_LOG()") Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-08drm/amdgpu: restore dcc bo tilling configs while movingFrank Min
While moving buffer which has dcc tiling config, it is needed to restore its original dcc tiling. 1. extend copy flag to cover tiling bits 2. add logic to restore original dcc tiling config Signed-off-by: Frank Min <Frank.Min@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-29 06:06:36 +0000