summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-10-16OMAPDSS: HDMI: use omapdss_versionTomi Valkeinen
Use omapdss_version in hdmi.c to select the proper hdmi features. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-16OMAPDSS: DSS: use omapdss_versionTomi Valkeinen
Use omapdss_version in dss.c to select the proper dss features. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-16OMAPDSS: DISPC: use omapdss_versionTomi Valkeinen
Use omapdss_version in dispc.c to select the proper dispc features. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-16OMAPDSS: use omapdss_version in dss_features.cTomi Valkeinen
Pass the omapdss_version to dss_features.c and use it to select the proper dss features. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-16OMAPDSS: add omapdss_versionTomi Valkeinen
Add new enum, omapdss_version, that is used to tell which DSS hardware version the SoC has. This enum is initialized during platform init, and passed in the platform data to omapdss driver. Note that the versions are not "continuous", that is, you cannot check if the version is less or greater than something, but you need to check for exact version match. In other words, this is invalid: /* test if DSS is 3630 or earlier */ if (ver <= OMAPDSS_VER_OMAP3630) ... Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-16usb: gadget: lpc32xx_udc: Fix compatibility with STOTG04Alexandre Pereira da Silva
The STOTG04 is an replacement for ISP1301. Most of the registers on STOTG04 are the same as on ISP1301, but the register ISP1301_I2C_OTG_CONTROL_2 (address 0x10) doesn't exist on the ST part. This is a work around for this by using the interrupt source register that should behave the same on both parts and has the needed information. Tested-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-16usb: renesas_usbhs: fixup interrupt status clear methodKuninori Morimoto
When interrupt happened, renesas_usbhs driver gets irq status by usbhs_status_get_each_irq(), and cleared all status by using 0. But, this method is incorrect, since extra interrupt might occur between them. This patch cleared corresponding bits only Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-16usb: renesas_usbhs: fixup __usbhs_for_each_pipe 1st posKuninori Morimoto
__usbhs_for_each_pipe() is the macro which moves around each pipe, but it has a bug which didn't care about 1st pipe's position. Because of this bug, it moves around pipe0, pipe2, pipe3 ... even though it requested pipe1, pipe2, pipe3... This patch modifies it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-16nouveau: fix warning on 32-bit build.Dave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-10-16Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes minor set of nouveau fixes. * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/bios: fix typo in error message drm/nouveau: only call ttm_agp_tt_create when __OS_HAS_AGP drm/nv50/fb: fix double free of vram mm drm/nouveau/pm: do not stop reclocking if failing to set the fan speed drm/nouveau/pm: fix a typo related to the move to the therm subdev drm/nouveau/hwmon: fix the initialization condition
2012-10-16drm/nouveau/bios: fix typo in error messageBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-16drm/nouveau: only call ttm_agp_tt_create when __OS_HAS_AGPMax Filippov
ttm_agp_tt_create is itself defined under CONFIG_AGP, so there's no point calling it otherwise. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-16drm/nv50/fb: fix double free of vram mmMarcin Slusarz
nouveau_fb_destroy already calls nouveau_mm_fini on vram mm. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-16drm/nouveau/pm: do not stop reclocking if failing to set the fan speedMartin Peres
With the introduction of fan management modes, fan may not be drivable. We should allow reclocking nonetheless. This return was stupid to begin with since it may have left the card in an intermediate state (clocks corresponding to a perflvl and voltage corresponding to another one). The reclocking code will need to be rewritten in a near-future in order to provide a better error handling. Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-16drm/nouveau/pm: fix a typo related to the move to the therm subdevMartin Peres
Reported-by: Vekin on IRC Reported-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-16drm/nouveau/hwmon: fix the initialization conditionMartin Peres
Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-15xtensa: Use Kbuild infrastructure to handle asm-generic headersMax Filippov
Use Kbuild infrastructure to handle the asm-generic headers and remove the wrapper headers that call them. This only affects headers that do nothing but include the generic equivalent. It does not touch any header that does a little more. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-15UAPI: (Scripted) Disintegrate arch/xtensa/include/asmDavid Howells
UAPI: (Scripted) Disintegrate arch/xtensa/include/asm Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-15xtensa: fix unaligned usermode accessMax Filippov
- correct use of .config #define name; CONFIG_UNALIGNED_USER ---> CONFIG_XTENSA_UNALIGNED_USER Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Pete Delaney <piet@tensilica.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-15xtensa: reorganize SR referencingMax Filippov
- reference SRs by names where possible, not by numbers; - get rid of __stringify around SR names where possible; - remove unneeded SR names from asm/regs.h; - add SREG_ prefix to remaining SR names; Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-15xtensa: fix boot parameters parsingMax Filippov
Boot parameter tags with handlers are ignored like this: [ 0.000000] Ignoring tag 0x00001003 [ 0.000000] Ignoring tag 0x00001001 [ 0.000000] Ignoring tag 0x00001004 because neither tagtable entries nor tag handlers appear in the vmlinux. Fix tagtable definition attributes so that tag entries are not dropped. Fix end of memory bank calculation in parse_tag_mem: it is intended to round down to page size, but instead did something strange leading to hang right after boot. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-15xtensa: fix missing return in do_page_fault for SIGBUS caseMarc Gauthier
Signed-off-by: Marc Gauthier <marc@tensilica.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-15xtensa: copy_thread with CLONE_VM must not copy live parent AR windowsMarc Gauthier
When doing a fork (new VM), the new task has a mirror image of the parent's stack, so keeps the same live register windows etc. However when doing a clone with CLONE_VM, keeping the same VM (eg. when creating a new thread), the child starts afresh on a new stack -- it cannot share any part of the parent stack. It especially cannot have the same live AR windows as the parent, otherwise it will overwrite the parent stack on overflow, likely causing corruption. (and so it did...) Effectively, the register windows need to be spilled. Turns out it's much easier to simply not copy parent register windows when CLONE_VM is set. Signed-off-by: Marc Gauthier <marc@tensilica.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-15xtensa: fix memmove(), bcopy(), and memcpy().Chris Zankel
- fix memmove to correctly handle overlapping src and dst; - fix memcpy loop ending conditions from signed '<=' to '!='; - modify bcopy to call memmove; Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-15xtensa: ISS: fix rs_put_charMax Filippov
ISS serial console prints garbage instead of symbols printed via rs_put_char. gcc optimizes away putting prined symbol into memory buffer because there's no evidence that the buffer is used afterwards. Make rs_put_char and rs_write use simc_write that has explicit wmb. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-15xtensa: ISS: fix specific simcallsMax Filippov
Simcalls that take memory buffer definitely need wmb or rmb to make sure gcc doesn't optimize away code that fills the buffer. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-15dtb: fix interrupt assignment for ehci/uhci on wm8505Tony Prisk
EHCI and UHCI devices in wm8505.dtsi should use IRQ 1 & 0 respectively - not 43 as used on newer models. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-15ARM: dts: compile Integrator device treesLinus Walleij
This makes sure that the ARM Integrator device trees get compiled during build. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-16drm: fix warning on 32-bit.Dave Airlie
This cast was causing a warning on 32-bit builds. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-10-16drm: radeon: fix printk format warningRandy Dunlap
drivers/gpu/drm/radeon/radeon_atpx_handler.c:151:3: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'size_t' [airlied: Alex had others fixed already, except for atpx one] Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-10-16Merge branch 'drm-fixes-3.7' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Alex writes: "This is the first -fixes pull for 3.7. I would have preferred to have gotten it out a bit sooner, but I was on holiday last week. - Cleanup of the new 2 level page table code it get it in better shape and using less memory. - Fix some display issues related to the PLL rework. - Fix some cmpiler warnings and errors with certain config options. - Other misc bug fixes." * 'drm-fixes-3.7' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix spelling typos in debugging output drm/radeon: Don't destroy I2C Bus Rec in radeon_ext_tmds_enc_destroy(). drm/radeon: check if pcie gen 2 is already enabled (v2) drm/radeon/cayman: set VM max pfn at MC init drm/radeon: separate pt alloc from lru add drm/radeon: don't add the IB pool to all VMs v2 drm/radeon: allocate page tables on demand v4 drm/radeon: update comments to clarify VM setup (v2) drm/radeon: allocate PPLLs from low to high drm/radeon: fix compilation with backlight disabled drm/radeon: use %zu for formatting size_t
2012-10-16Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: "- some register magic to fix hsw crw (Paulo&Ben) - fix backlight destruction for cpu edp (Jani) - fix gen ch7xxx dvo ->get_hw_state - fixup the plane->pipe fixup code, the broken version massively angers the modeset sanity checks - kill pipe A quirk for i855gm, otherwise I get a black screen with the above patch - fixup for gem_get_page helper (Chris) - fixup guardband clipping w/a (Ken), without this mesa master can erronously drop vertices on snb, mesa 9.0 has the optimization reverted - another pageflip vs. modeset fix - kill bogus BUG_ON which broke ums+gem from Willy Tarreau (gasp, people are still using this!)" * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: fix non-DP-D eDP backlight cleanup and module reload drm/i915: HSW CRW stability magic drm/i915/dvo-ch7xxx: fix get_hw_state drm/i915: fixup the plane->pipe fixup code drm/i915: rip out the pipe A quirk for i855gm drm/i915: disable wc gtt pte mappings on gen2 drm/i915: fixup i915_gem_object_get_page inline helper drm/i915: Disallow preallocation of requests drm/i915: Set guardband clipping workaround bit in the right register. drm/i915: paper over a pipe-enable vs pageflip race drm/i915: remove useless BUG_ON which caused a regression in 3.5.
2012-10-16ARM: shmobile: r8a7779: use __iomem pointers for MMIOKuninori Morimoto
0a4b04dc299dfb691827a4001b3d8d7e443b71c9 (ARM: shmobile: use __iomem pointers for MMIO) modified iomem pointers so that IOMEM() macro will be used, but clock-r8a7779.c was out of target. This patch fixes it up. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-10-15ARM: OMAP: Trivial driver changes to remove include plat/cpu.hTony Lindgren
Drivers should not use cpu_is_omap or cpu_class_is_omap macros, they should be private to the platform init code. And we'll be removing plat/cpu.h and only have a private soc.h for the arch/arm/*omap* code. This patch is intended as preparation for the core omap changes and removes the need to include plat/cpu.h from several drivers. This is needed for the ARM common zImage support. These changes are OK to do because: - omap-rng.c does not need plat/cpu.h - omap-aes.c and omap-sham.c get the proper platform_data passed to them so they don't need extra checks in the driver - omap-dma.c and omap-pcm.c can test the arch locally as omap1 and omap2 cannot be compiled together because of conflicting compiler flags Cc: Deepak Saxena <dsaxena@plexity.net> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Venkatraman S <svenkatr@ti.com> Cc: Chris Ball <cjb@laptop.org> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: linux-crypto@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org [tony@atomide.com: mmc changes folded in to an earlier patch] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-15staging: tidspbridge: remove unnecessary include of <plat/clock.h>Paul Walmsley
The DSPBridge driver includes arch/arm/plat-omap/include/plat/clock.h. All of the <plat/ ...> includes are causing problems with the ARM single image kernel effort. Remove this one. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-15ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.hLokesh Vutla
Move plat/dma.h to plat-omap/dma-omap.h as part of single zImage work Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-15ARM: OMAP2+: DMA: Moving OMAP2+ DMA channel definitions to mach-omap2Lokesh Vutla
Similar to omap1, some of the omap2+ dma channel definitions are used by some drivers. For moving omap2+ dma channel definitions to mach-omap2/, the used ones should be defined locally to driver. Drivers can eliminate it using DT, platform data, or IORESOURCE_DMA And moving omap2+ DMA channel definitions to mach-omap2 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-15ARM: OMAP1: DMA: Moving OMAP1 DMA channel definitions to mach-omap1Lokesh Vutla
Some of the omap1 dma channel definitions are used by some drivers. For moving omap1 dma channel definitions to mach-omap1/, the used ones should be defined locally to driver. Driver can eliminate it by using DT, platform data, or IORESOURCE_DMA. And moving OMAP1 DMA channel definitions to mach-omap1 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-15ARM: OMAP: DMA: Removing plat/dma-44xx.hLokesh Vutla
None of the DMA channel definitions defined in plat/dma-44xx.h are used. So removing it. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-15thermal, cpufreq: Fix build when CPU_FREQ_TABLE isn't configuredDavid Rientjes
Commit 023614183768 ("thermal: add generic cpufreq cooling implementation") requires cpufreq_frequency_get_table(), but that function is only defined for CONFIG_CPU_FREQ_TABLE resulting in the following build error: drivers/built-in.o: In function `cpufreq_get_max_state': drivers/thermal/cpu_cooling.c:259: undefined reference to `cpufreq_frequency_get_table' drivers/built-in.o: In function `get_cpu_frequency': drivers/thermal/cpu_cooling.c:129: undefined reference to `cpufreq_frequency_get_table' Fix it by selecting CONFIG_CPU_FREQ_TABLE for such a configuration. It turns out CONFIG_EXYNOS_THERMAL also needs CONFIG_CPU_FREQ_TABLE, so select it there as well. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-15ARM: OMAP2: Move plat/menelaus.h to linux/mfd/menelaus.hTony Lindgren
We can move menelaus.h to live with other mfd headers to get it out of plat for ARM common zImage support. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-15serial/8250_hp300: Missing 8250 register interface conversion bitsGeert Uytterhoeven
commit 2655a2c76f80d91da34faa8f4e114d1793435ed3 ("8250: use the 8250 register interface not the legacy one") forgot to fully switch one instance of struct uart_port to struct uart_8250_port, causing the following compile failure: drivers/tty/serial/8250/8250_hp300.c: In function ‘hpdca_init_one’: drivers/tty/serial/8250/8250_hp300.c:174: error: ‘uart’ undeclared (first use in this function) drivers/tty/serial/8250/8250_hp300.c:174: error: (Each undeclared identifier is reported only once drivers/tty/serial/8250/8250_hp300.c:174: error: for each function it appears in.) This went unnoticed in -next, as CONFIG_HPDCA is not set to y by allmodconfig. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Philip Blundell <philb@gnu.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-15kbuild: Fix accidental revert in commit fe04ddfMichal Marek
Commit fe04ddf7c291 ("kbuild: Do not package /boot and /lib in make tar-pkg") accidentally reverted two previous kbuild commits. I don't know what I was thinking. This brings back changes made by commits 24cc7fb69a5b ("x86/kbuild: archscripts depends on scripts_basic") and c1c1a59e37da ("firmware: fix directory creation rule matching with make 3.80") Reported-by: Jan Beulich <JBeulich@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-15mmc: omap: Remove cpu_is_omap usage from the driverTony Lindgren
This is needed for the ARM common zImage support. We can use the existing slot features to pass omap1 specific options to the driver. For omap2 we don't want to pass anything new as that will be eventually moved to use device tree based init. Note that this patch depends on earlier patch that moves plat/mmc.h into include/linux/platform_data. Cc: linux-mmc@vger.kernel.org Cc: Venkatraman S <svenkatr@ti.com> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-15ARM: OMAP: Split plat/mmc.h into local headers and platform_dataTony Lindgren
We need to remove this from plat for ARM common zImage support. Also remove includes not needed by the omap_hsmmc.c driver. Cc: linux-mmc@vger.kernel.org Acked-by: Chris Ball <cjb@laptop.org> Acked-by: Venkatraman S <svenkatr@ti.com> [tony@atomide.com: fold in removal of unused driver includes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-15drm/radeon: fix spelling typos in debugging outputThomas Friebel
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-10-15drm/radeon: Don't destroy I2C Bus Rec in radeon_ext_tmds_enc_destroy().Egbert Eich
radeon_i2c_fini() walks thru the list of I2C bus recs rdev->i2c_bus[] to destroy each of them. radeon_ext_tmds_enc_destroy() however also has code to destroy it's associated I2C bus rec which has been obtained by radeon_i2c_lookup() and is therefore also in the i2c_bus[] list. This causes a double free resulting in a kernel panic when unloading the radeon driver. Removing destroy code from radeon_ext_tmds_enc_destroy() fixes this problem. agd5f: fix compiler warning Signed-off-by: Egbert Eich <eich@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-10-15drm/radeon: check if pcie gen 2 is already enabled (v2)Alex Deucher
If so, skip enabling it to save time. v2: coding style fixes Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-10-15drm/radeon/cayman: set VM max pfn at MC initAlex Deucher
No need to emit them at VM flush as we no longer use variable sized page tables now that we support 2 level page tables. This matches the behavior of SI (which does not support variable sized page tables). Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2012-10-15drm/radeon: separate pt alloc from lru addChristian König
Make it possible to allocate a persistent page table. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-12 15:17:01 +0000