summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-04-12ARM: dts: am335x: evmsk: Replaced register offsets with definesChristina Quast
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-12ARM: dts: am335x: evm: Replaced register offsets with definesChristina Quast
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-12ARM: dts: am335x: cm-t335: Replaced register offsets with definesChristina Quast
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-12ARM: dts: am335x: chilisom: Replaced register offsets with definesChristina Quast
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-12ARM: dts: am335x: chiliboard: Replaced register offsets with definesChristina Quast
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-12ARM: dts: am335x: bonegreen-common: Replaced register offsets with definesChristina Quast
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-12ARM: dts: am335x: boneblue: Replaced register offsets with definesChristina Quast
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-12ARM: dts: am335x: bonegreen-wireless: Replaced register offsets with definesChristina Quast
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-12ARM: dts: am335x: base0033: Replaced register offsets with definesChristina Quast
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-12ARM: dts: am335x: baltos: Replaced register offsets with definesChristina Quast
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-12ARM: dts: am335x: baltos-leds: Replaced register offsets with definesChristina Quast
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-12ARM: dts: am335x: baltos-ir5221: Replaced register offsets with definesChristina Quast
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-12ARM: dts: am335x: baltos-ir3220: Replaced register offsets with definesChristina Quast
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-12ARM: dts: am335x: baltos-ir2110: Replaced register offsets with definesChristina Quast
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-12arm64: tegra: Enable command queue for Tegra186 SDMMC4Sowjanya Komatineni
The workaround for a hardware bug preventing this from working has been merged now, so command queue support can be enabled again for Tegra186. Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-12arm64: tegra: Fix default tap and trim valuesSowjanya Komatineni
Default tap and trim values are incorrect for Tegra186 SDMMC4. This patch fixes them. Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-12arm64: tegra: Add supply for temperature sensor on P2888Jon Hunter
The VCC supply property is not populated for the temperature sensor on the P2888 board and so the following warning is observed on boot ... lm90 0-004c: 0-004c supply vcc not found, using dummy regulator On the P2888 board, the VCC supply for the temperature sensor is connected to the 'vdd_1v8ls' rail. Add the 'vcc-supply' property for the temperature sensor to prevent this warning message from occurring. Fixes: 8b457812f54b ('arm64: tegra: Add temperature sensor on P2888') Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-12arm64: tegra: Enable aconnect, ADMA and AGIC on Jetson TX1Sameer Pujar
These are currently mostly unused because we lack a proper audio driver on Tegra210. However, enabling them makes sure that at least their probe code paths are tested at runtime. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-12arm64: tegra: Add L2 cache topology to Tegra210Joseph Lo
Add L2 cache and make it the next level of cache for each of the CPUs. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-12arm64: tegra: Enable CPU idle support for ShieldJoseph Lo
Enable CPU idle support for Shield platform. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-12arm64: tegra: Enable CPU idle support for SmaugJoseph Lo
Enable CPU idle support for Smaug platform. Signed-off-by: Joseph Lo <josephl@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-12arm64: tegra: Enable CPU idle support for Jetson TX1Joseph Lo
Enable CPU idle support for Jetson TX1 platform. Signed-off-by: Joseph Lo <josephl@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-12arm64: tegra: Add CPU idle states properties for Tegra210Joseph Lo
Add idle states properties for generic ARM CPU idle driver. This includes a cpu-sleep state which is the power down state of CPU cores. Signed-off-by: Joseph Lo <josephl@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-12arm64: tegra: Fix timer node for Tegra210Joseph Lo
Fix timer node to make it work with Tegra210 timer driver. Signed-off-by: Joseph Lo <josephl@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-12ARM: dts: iwg23s-sbc: Enable HS-USBBiju Das
Enable HS-USB device for the iWave SBC based on RZ/G1C. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-12ARM: dts: r8a77470: Add HSUSB device nodesBiju Das
Define the r8a77470 generic part of the HSUSB0/1 device nodes. Currently the renesas_usbhs driver doesn't handle multiple phys and we don't have a proper hardware to validate such driver changes. So for hsusb1 it is assumed that usbphy0 will be enabled by either channel0 host or device. In future, if any boards support hsusb1, we will need to add multiple phy support in the renesas_usbhs driver and override the board dts to enable the same. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-12ARM: dts: iwg23s-sbc: Enable USB USB2.0 HostBiju Das
Enable USB2.0 host on the iwg23s sbc. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-12ARM: dts: r8a77470: Add USB2.0 Host (EHCI/OHCI) deviceBiju Das
Define the r8a77470 generic part of the USB2.0 Host Controller device nodes (ehci[01]/ohci[01]). Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-12ARM: dts: iwg23s-sbc: Enable USB Phy[01]Biju Das
Enable USB phy[01] on iWave iwg23s sbc based on RZ/G1C SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-12ARM: dts: r8a77470: Add USB PHY DT supportBiju Das
Define the r8a77470 generic part of the USB PHY device node. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-12ARM: dts: r8a77470: Add VIN supportCao Van Dong
Add vin{0|1} nodes to dtsi for VIN support on the RZ/G1C (r8a77470) SoC. Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-12ARM: dts: r8a77470: Add PWM supportCao Van Dong
Add pwm{0|1|2|3|4|5|6} nodes to dtsi for PWM support on the RZ/G1C (r8a77470) SoC. Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-12ARM: dts: r8a77470: Add HSCIF supportCao Van Dong
Add hscif{0|1|2} nodes to dtsi for HSCIF support on the RZ/G1C (r8a77470) SoC. Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-12ARM: dts: rockchip: Add DDR retention/poweroff to rk3288-veyron hogsDouglas Anderson
Even though upstream Linux doesn't yet go into deep enough suspend to get DDR into self refresh, there is no harm in setting these pins up. They'll only actually do something if we go into a deeper suspend but leaving them configed always is fine. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-12ARM: dts: rockchip: Add dynamic-power-coefficient for rk3288Matthias Kaehlcke
The value was determined with the following method: - take CPUs 1-3 offline - for each OPP - set cpufreq min and max freq to OPP freq - start dhrystone benchmark - measure CPU power consumption during 10s - calculate Cx for OPPx - Cx = (Px - P1) / (Vx²fx - V1²f1) [1] using the following units: mW / Ghz / V [2] - C = avg(C2, ..., Cn) [1] see commit 4daa001a1773 ("arm64: dts: juno: Add cpu dynamic-power-coefficient information") [2] https://patchwork.kernel.org/patch/10493615/#22158551 FTR, these are the values for the different OPPs: freq (kHz) mV Px (mW) Cx 126000 900 39 216000 900 66 370 312000 900 95 372 408000 900 122 363 600000 900 177 359 696000 950 230 363 816000 1000 297 361 1008000 1050 404 362 1200000 1100 528 362 1416000 1200 770 377 1512000 1300 984 385 1608000 1350 1156 394 Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-11arm64: dts: rockchip: fix cts, rts pin assign of UART3 for rk3399Katsuhiro Suzuki
This patch fixes pin assign of cts and rts signal of UART3. Currently GPIO3_C2 and C3 pins are assigned but TRM says that GPIO3_C0 and C1 are correct. Refer: RK3399 TRM v1.4 - Table 19-1 UART Interface Description Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-11ARM: dts: rockchip: bulk convert gpios to their constant counterpartsHeiko Stuebner
Rockchip SoCs use 2 different numbering schemes. Where the gpio- controllers just count 0-31 for their 32 gpios, the underlying iomux controller splits these into 4 separate entities A-D. Device-schematics always use these iomux-values to identify pins, so to make mapping schematics to devicetree easier Andy Yan introduced named constants for the pins but so far we only used them on new additions. Using a sed-script created by Emil Renner Berthing bulk-convert the remaining raw gpio numbers into their descriptive counterparts and also gets rid of the unhelpful RK_FUNC_x -> x and RK_GPIOx -> x mappings: /rockchip,pins *=/bcheck b # to end of script :append-next-line N :check /^[^;]*$/bappend-next-line s/<RK_GPIO\([0-9]\) /<\1 /g s/<\([^ ][^ ]* *\)0 /<\1RK_PA0 /g s/<\([^ ][^ ]* *\)1 /<\1RK_PA1 /g s/<\([^ ][^ ]* *\)2 /<\1RK_PA2 /g s/<\([^ ][^ ]* *\)3 /<\1RK_PA3 /g s/<\([^ ][^ ]* *\)4 /<\1RK_PA4 /g s/<\([^ ][^ ]* *\)5 /<\1RK_PA5 /g s/<\([^ ][^ ]* *\)6 /<\1RK_PA6 /g s/<\([^ ][^ ]* *\)7 /<\1RK_PA7 /g s/<\([^ ][^ ]* *\)8 /<\1RK_PB0 /g s/<\([^ ][^ ]* *\)9 /<\1RK_PB1 /g s/<\([^ ][^ ]* *\)10 /<\1RK_PB2 /g s/<\([^ ][^ ]* *\)11 /<\1RK_PB3 /g s/<\([^ ][^ ]* *\)12 /<\1RK_PB4 /g s/<\([^ ][^ ]* *\)13 /<\1RK_PB5 /g s/<\([^ ][^ ]* *\)14 /<\1RK_PB6 /g s/<\([^ ][^ ]* *\)15 /<\1RK_PB7 /g s/<\([^ ][^ ]* *\)16 /<\1RK_PC0 /g s/<\([^ ][^ ]* *\)17 /<\1RK_PC1 /g s/<\([^ ][^ ]* *\)18 /<\1RK_PC2 /g s/<\([^ ][^ ]* *\)19 /<\1RK_PC3 /g s/<\([^ ][^ ]* *\)20 /<\1RK_PC4 /g s/<\([^ ][^ ]* *\)21 /<\1RK_PC5 /g s/<\([^ ][^ ]* *\)22 /<\1RK_PC6 /g s/<\([^ ][^ ]* *\)23 /<\1RK_PC7 /g s/<\([^ ][^ ]* *\)24 /<\1RK_PD0 /g s/<\([^ ][^ ]* *\)25 /<\1RK_PD1 /g s/<\([^ ][^ ]* *\)26 /<\1RK_PD2 /g s/<\([^ ][^ ]* *\)27 /<\1RK_PD3 /g s/<\([^ ][^ ]* *\)28 /<\1RK_PD4 /g s/<\([^ ][^ ]* *\)29 /<\1RK_PD5 /g s/<\([^ ][^ ]* *\)30 /<\1RK_PD6 /g s/<\([^ ][^ ]* *\)31 /<\1RK_PD7 /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)0 /<\1RK_FUNC_GPIO /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)RK_FUNC_\([1-9]\) /<\1\2 /g Suggested-by: Emil Renner Berthing <esmil@mailme.dk> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-11arm64: dts: rockchip: bulk convert gpios to their constant counterpartsHeiko Stuebner
Rockchip SoCs use 2 different numbering schemes. Where the gpio- controllers just count 0-31 for their 32 gpios, the underlying iomux controller splits these into 4 separate entities A-D. Device-schematics always use these iomux-values to identify pins, so to make mapping schematics to devicetree easier Andy Yan introduced named constants for the pins but so far we only used them on new additions. Using a sed-script created by Emil Renner Berthing bulk-convert the remaining raw gpio numbers into their descriptive counterparts and also gets rid of the unhelpful RK_FUNC_x -> x and RK_GPIOx -> x mappings: /rockchip,pins *=/bcheck b # to end of script :append-next-line N :check /^[^;]*$/bappend-next-line s/<RK_GPIO\([0-9]\) /<\1 /g s/<\([^ ][^ ]* *\)0 /<\1RK_PA0 /g s/<\([^ ][^ ]* *\)1 /<\1RK_PA1 /g s/<\([^ ][^ ]* *\)2 /<\1RK_PA2 /g s/<\([^ ][^ ]* *\)3 /<\1RK_PA3 /g s/<\([^ ][^ ]* *\)4 /<\1RK_PA4 /g s/<\([^ ][^ ]* *\)5 /<\1RK_PA5 /g s/<\([^ ][^ ]* *\)6 /<\1RK_PA6 /g s/<\([^ ][^ ]* *\)7 /<\1RK_PA7 /g s/<\([^ ][^ ]* *\)8 /<\1RK_PB0 /g s/<\([^ ][^ ]* *\)9 /<\1RK_PB1 /g s/<\([^ ][^ ]* *\)10 /<\1RK_PB2 /g s/<\([^ ][^ ]* *\)11 /<\1RK_PB3 /g s/<\([^ ][^ ]* *\)12 /<\1RK_PB4 /g s/<\([^ ][^ ]* *\)13 /<\1RK_PB5 /g s/<\([^ ][^ ]* *\)14 /<\1RK_PB6 /g s/<\([^ ][^ ]* *\)15 /<\1RK_PB7 /g s/<\([^ ][^ ]* *\)16 /<\1RK_PC0 /g s/<\([^ ][^ ]* *\)17 /<\1RK_PC1 /g s/<\([^ ][^ ]* *\)18 /<\1RK_PC2 /g s/<\([^ ][^ ]* *\)19 /<\1RK_PC3 /g s/<\([^ ][^ ]* *\)20 /<\1RK_PC4 /g s/<\([^ ][^ ]* *\)21 /<\1RK_PC5 /g s/<\([^ ][^ ]* *\)22 /<\1RK_PC6 /g s/<\([^ ][^ ]* *\)23 /<\1RK_PC7 /g s/<\([^ ][^ ]* *\)24 /<\1RK_PD0 /g s/<\([^ ][^ ]* *\)25 /<\1RK_PD1 /g s/<\([^ ][^ ]* *\)26 /<\1RK_PD2 /g s/<\([^ ][^ ]* *\)27 /<\1RK_PD3 /g s/<\([^ ][^ ]* *\)28 /<\1RK_PD4 /g s/<\([^ ][^ ]* *\)29 /<\1RK_PD5 /g s/<\([^ ][^ ]* *\)30 /<\1RK_PD6 /g s/<\([^ ][^ ]* *\)31 /<\1RK_PD7 /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)0 /<\1RK_FUNC_GPIO /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)RK_FUNC_\([1-9]\) /<\1\2 /g Suggested-by: Emil Renner Berthing <esmil@mailme.dk> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Acked-by: Robin Murphy <robin.murphy@arm.com>
2019-04-11arm64: dts: rockchip: enable display nodes on rk3328-roc-ccLeonidas P. Papadakos
Enable necessary nodes to get output on the hdmi port of the board. This is a port of Heiko's patch for the rock64. Signed-off-by: Leonidas P. Papadakos <papadakospan@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-11arm64: dts: rockchip: eMMC additions for rk3328-roc-ccLeonidas P. Papadakos
The eMMC 5.x that Libre Computer provide for their boards supports HS200 mode. The support is already included in the dts for their newest board: La Frite (AML-S805X-AC) dts: arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts That same eMMC is supported in the ROC-RK3328-CC: https://www.loverpi.com/products/libre-computer-board-emmc-5-x-module This increases the speed of the eMMC significantly. Signed-off-by: Leonidas P. Papadakos <papadakospan@gmail.com> [added supplies as suggested by Leonidas] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-11ARM: dts: rockchip: Add BT_EN to the power sequence for veyronMatthias Kaehlcke
Add GPIO D5 (BT_ENABLE_L) as reset-GPIO to the power sequence for the Bluetooth/WiFi module. On devices with a Broadcom module the signal needs to be asserted to use Bluetooth. Note that BT_ENABLE_L is a misnomer in the schematics, the signal actually is active-high. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-11ARM: dts: rockchip: Remove unnecessary setting of UART0 SCLK rate on veyronMatthias Kaehlcke
Some veyron devices have a Bluetooth controller connected on UART0. The UART needs to operate at a high speed, however setting the clock rate at initialization has no practical effect. During initialization user space adjusts the UART baudrate multiple times, which ends up changing the SCLK rate. After a successful initiatalization the clk is running at the desired speed (48MHz). Remove the unnecessary clock rate configuration from the DT. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-11ARM: dts: stm32: enable cec on stm32mp157a-dk1 boardYannick Fertré
Enable CEC (Consumer Electronics Control) device. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-04-11ARM: dts: stm32: add cec pins muxing on stm32mp157Yannick Fertré
Add a new pin muxing for cec. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-04-11ARM: dts: stm32: add ltdc pins muxing on stm32mp157Yannick Fertré
Add ltdc pins muxing on stm32mp157. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-04-11ARM: dts: stm32: add I2C sleep pins muxing on stm32mp157Yannick Fertré
Add I2C sleep pins muxing for low power mode. Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-04-11ARM: dts: stm32: add power supply of otm8009a on stm32mp157c-dk2Yannick Fertré
This patch adds a new property (power-supply) to panel otm8009a (orisetech) on stm32mp157c-dk2 & regulator v3v3. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-04-11ARM: dts: stm32: Enable STM32F769 clock driverGabriel Fernandez
This patch enables clocks for STM32F769 boards. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-04-11ARM: dts: stm32: add stpmic1 support on stm32mp157a dk1 boardPascal Paillet
This patch adds stpmic1 support on stm32mp157a dk1 board. The STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10 regulators, 3 power switches, a watchdog and an input for a power on key. The DMAs are disabled because the PMIC generates a very few traffic and DMA channels may lack for other usage. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-04-11ARM: dts: stm32: add stpmic1 support on stm32mp157c ed1 boardPascal Paillet
This patch adds stpmic1 support on stm32mp157c ed1 board. The STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10 regulators, 3 power switches, a watchdog and an input for a power on key. The DMAs are disabled because the PMIC generates a very few traffic and DMA channels may lack for other usage. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
generated by cgit (git 2.34.1) at 2025-09-27 00:01:19 +0000