summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-27arm64: dts: qcom: msm8992: Add PSCI support.Konrad Dybcio
This SoC's firmware does not fully support the PSCI spec, but it's good enough to bring the cores up. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200625182118.131476-11-konradybcio@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27arm64: dts: qcom: msm8992: Add PMU nodeKonrad Dybcio
Add the PMU so we can get proper perf event support on this SoC. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200625182118.131476-10-konradybcio@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodesKonrad Dybcio
Add support for I2C to enable support for peripherals such as touchscreens or sensors. Also add BLSP_UART2 interface. Please note that the naming scheme follows downstream and as abominable as it is, that's what we get. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200625182118.131476-9-konradybcio@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter deviceKonrad Dybcio
Add SPMI PMIC arbiter device to communicate with PMICs attached to SPMI bus. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200625182118.131476-8-konradybcio@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27arm64: dts: qcom: msm8992: Add a SCM nodeKonrad Dybcio
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200625182118.131476-7-konradybcio@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27arm64: dts: qcom: msm8992: Add a proper CPU mapKonrad Dybcio
This commit adds cpu nodes for all 6 cores present on this SoC and the cpu-map. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200625182118.131476-6-konradybcio@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27arm64: dts: qcom: bullhead: Move UART pinctrl to SoCKonrad Dybcio
This pinout is common for every 8992-based device and should therefore reside in the SoC device tree. Also convert addresses into phandles. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200625182118.131476-5-konradybcio@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27arm64: dts: qcom: bullhead: Add qcom,msm-idKonrad Dybcio
Add the property required for the bootloader to select the correct device tree blob. It has been removed from the SoC device tree as it should be set on a per-device basis. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200625182118.131476-4-konradybcio@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27arm64: dts: qcom: msm8992: Fix SDHCI1Konrad Dybcio
This commit ensures the correct IRQ type is set and disables the device by default. The mmc-hs400-1_8v property is also moved to Bullhead as it might not be present on all boards. The node has been renamed to sdhci@ instead of mmc@ and the phandle was changed to sdhc_1 to comply with the newer DTS style. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200625182118.131476-3-konradybcio@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27arm64: dts: qcom: msm8992: Modernize the DTS styleKonrad Dybcio
Following changes have been made: - remove name, compatible and msm-id - wrap clocks in clocks{} - order nodes by name and by address - clock_gcc -> gcc - msmgpio -> tlmm - retire msm8992-pins.dtsi - add some of the missing pins - make comments C-style - make apcs a mailbox Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200625182118.131476-2-konradybcio@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)Konrad Dybcio
Add device tree support for the Sony Xperia Z5 smartphone. It's based on Sony Kitakami platform (msm8994) and hence a Kitakami-common DTSI has been created so as to reduce clutter when remaining devices are added. The board currently supports * Serial * SDHCI * I2C * Regulator configuration * pstore log dump * GPIO keys Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200624150107.76234-9-konradybcio@gmail.com [bjorn: Changed vendor identifier in board compatible from somc to sony] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.Konrad Dybcio
This was the only device using that dtsi, so no point keeping it separate AND with a confusing name (bullhead is based on msm8992 and the file contains regulator values for that specific board). Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200624150107.76234-8-konradybcio@gmail.com [bjorn: Squashed with change that remove regulators from msm8992.dtsi] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27arm64: dts: qcom: msm8994: Add support for SMD RPMKonrad Dybcio
Add support for SMD RPM, including pm8994 and pmi8994 regulators. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200624150107.76234-7-konradybcio@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27arm64: dts: qcom: msm8992: Add a label to rpm-requestsKonrad Dybcio
This enables the node to be referenced directly from other DTs. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200624150107.76234-4-konradybcio@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27arm64: dts: qcom: msm8994: Add SCM nodeKonrad Dybcio
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200624150107.76234-3-konradybcio@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27arm64: dts: qcom: sdm845-db845c: Add hdmi bridge nodesBjorn Andersson
Enable MDSS and DSI and add the LT9611 HDMI bridge. Also add the HDMI audio nodes. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200727075532.1932134-1-vkoul@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27arm64: dts: qcom: add sm8250 GPU nodesJonathan Marek
This brings up the GPU. Tested on HDK865 by running vulkan CTS. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20200709135251.643-15-jonathan@marek.ca Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27arm64: dts: qcom: add sm8150 GPU nodesJonathan Marek
This brings up the GPU. Tested on HDK855 by running vulkan CTS. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20200709135251.643-14-jonathan@marek.ca Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27dt-bindings: power: Add missing rpmpd rpmh regulator levelJonathan Marek
Add RPMH_REGULATOR_LEVEL_SVS_L0, used by sm8250. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20200709135251.643-13-jonathan@marek.ca Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27arm64: dts: qcom: sc7180: Add opp-peak-kBps to GPU oppSharat Masetty
Add opp-peak-kBps bindings to the GPU opp table, listing the peak GPU -> DDR bandwidth requirement for each opp level. This will be used to scale the DDR bandwidth along with the GPU frequency dynamically. Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org> Link: https://lore.kernel.org/r/1594992579-20662-7-git-send-email-akhilpo@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27arm64: dts: qcom: sc7180: Add interconnects property for GPUSharat Masetty
This patch adds the interconnects property to the GPU node. This enables the GPU->DDR path bandwidth voting. Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org> Link: https://lore.kernel.org/r/1594992579-20662-6-git-send-email-akhilpo@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27arm64: dts: qcom: SDM845: Enable GPU DDR bw scalingSharat Masetty
This patch adds the interconnects property for the gpu node and the opp-peak-kBps property to the opps of the gpu opp table. This should help enable DDR bandwidth scaling dynamically and proportionally to the GPU frequency. Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org> Link: https://lore.kernel.org/r/1594992579-20662-5-git-send-email-akhilpo@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27arm64: dts: qcom: sc7180: Add support for context losing replicatorSai Prakash Ranjan
Add "qcom,replicator-loses-context" property to the replicator in Always-on domain in SC7180 SoC to enable coresight replicator driver to handle this variation of replicator designs. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Link: https://lore.kernel.org/r/5072d94849cfaee46748d26ac997212fb2d783c2.1591708204.git.saiprakash.ranjan@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-28usb: chipidea: imx: get available runtime dr mode for wakeup settingPeter Chen
If runtime dr_mode is not dual-role, it doesn't need to enable ID wakeup interrupt. If runtime dr_mode is host, it doesn't need to enable VBUS wakeup interrupt. With these changes, the user will not get the unexpected wakeup for single role use case. For example, the host-only use case at Micro-AB port, the controller should not be waken up by only plug in Micro-AB cable or the Micro-B cable with host. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-07-27soc: qcom: pdr: Reorder the PD state indication ackSibi Sankar
The Protection Domains (PD) have a mechanism to keep its resources enabled until the PD down indication is acked. Reorder the PD state indication ack so that clients get to release the relevant resources before the PD goes down. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Fixes: fbe639b44a82 ("soc: qcom: Introduce Protection Domain Restart helpers") Reported-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200701195954.9007-1-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-28usb: chipidea: add query_available_role interfacePeter Chen
The glue layer may need to know current available role to do some setting, eg, the wakeup setting. So we add ci_hdrc_query_available_role for that. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-07-28xfrm: esp6: fix the location of the transport header with encapsulationSabrina Dubroca
commit 17175d1a27c6 ("xfrm: esp6: fix encapsulation header offset computation") changed esp6_input_done2 to correctly find the size of the IPv6 header that precedes the TCP/UDP encapsulation header, but didn't adjust the final call to skb_set_transport_header, which I assumed was correct in using skb_network_header_len. Xiumei Mu reported that when we create xfrm states that include port numbers in the selector, traffic from the user sockets is dropped. It turns out that we get a state mismatch in __xfrm_policy_check, because we end up trying to compare the encapsulation header's ports with the selector that's based on user traffic ports. Fixes: 0146dca70b87 ("xfrm: add support for UDPv6 encapsulation of ESP") Fixes: 26333c37fc28 ("xfrm: add IPv6 support for espintcp") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-07-28power: supply: rt5033_battery: Fix error code in rt5033_battery_probe()Peng Fan
In the function rt5033_battery_probe(), it should return -ENOMEM instead of -EINVAL when call function devm_kzalloc() failed. Signed-off-by: Peng Fan <fanpeng@loongson.cn> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-07-28power: supply: max17040: Add POWER_SUPPLY_PROP_CAPACITY_ALERT_MINMatheus Castello
Adds the property POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN to export the chip->low_soc_alert and add the property as writeable, implementing max17040_prop_writeable and max17040_set_property, so with that the user space can readjust the alerts. Signed-off-by: Matheus Castello <matheus@castello.eng.br> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-07-28power: supply: check if calc_soc succeeded in pm860x_init_batteryTom Rix
clang static analysis flags this error 88pm860x_battery.c:522:19: warning: Assigned value is garbage or undefined [core.uninitialized.Assign] info->start_soc = soc; ^ ~~~ soc is set by calling calc_soc. But calc_soc can return without setting soc. So check the return status and bail similarly to other checks in pm860x_init_battery and initialize soc to silence the warning. Fixes: a830d28b48bf ("power_supply: Enable battery-charger for 88pm860x") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-07-28power: supply: bq2xxxx: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> [also update recently added ti.com http links] Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-07-27Merge tag 'sh-for-5.8-part2' of git://git.libc.org/linux-sh into masterLinus Torvalds
Pull arch/sh fixes from Rich Felker: "Two last-minute fixes: one is for a boot regression (mmu code broken) and the other fixes a long-standing broken syscall number bounds check" * tag 'sh-for-5.8-part2' of git://git.libc.org/linux-sh: sh: Fix validation of system call number sh/tlb: Fix PGTABLE_LEVELS > 2
2020-07-28power: reset: add driver for LinkStation power offDaniel González Cabanelas
Some Buffalo LinkStations perform the power off operation, at restart time, depending on the state of an output pin (LED2/INTn) at the ethernet PHY. This pin is also used to wake the machine when a WoL packet is received by the PHY. The driver is required by the Buffalo LinkStation LS421DE (ARM MVEBU), and other models. Without it, the board remains forever halted if a power off command is executed, unless the PSU is disconnected and connected again. Add the driver to provide the power off function and also make the WoL feature to be available. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-07-28ARM: dts: Aspeed: tacoma: Enable EHCI controllerEddie James
Enable the second EHCI controller on the AST2600. Also add a line-name for the GPIO that controls power to the USB port. The power control is in place to allow the port to be disabled, for those that are worried about rogue USB sticks. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-28ARM: dts: aspeed: rainier: Enable EHCI controllerEddie James
Enable the second EHCI controller on the AST2600. Also add a line-name for the GPIO that controls power to the USB port. The power control is in place to allow the port to be disabled, for those that are worried about rogue USB sticks. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-28ARM: dts: aspeed: rainier: Switch OCCs to P10Eddie James
Rainier uses the P10 processor so the OCC binding should reflect that. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-28ARM: dts: aspeed: rainier: Add FSI I2C mastersJoel Stanley
The host processor contains i2c masters on each cfam. Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-28ARM: dts: aspeed: rainier: Add CFAM SPI controllersEddie James
Add the four SPI masters on each CFAM. Each master has four 128KB EEPROM devices attached to it. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-28ARM: dts: aspeed: rainier: Add I2C buses for NVMe useJet Li
Adding pca9552 exposes the presence detect lines for the cards and tca9554 exposes the presence details for the cards. Signed-off-by: Jet Li <Jet.Li@ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-28ARM: dts: aspeed: Initial device tree for AMD EthanolXSupreeth Venkatesh
Initial introduction of AMD EthanolX platform equipped with an Aspeed ast2500 BMC manufactured by AMD. AMD EthanolX platform is an AMD customer reference board with an Aspeed ast2500 BMC manufactured by AMD. This adds AMD EthanolX device tree file including the flash layout used by EthanolX BMC machines. Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@amd.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-28ARM: dts: rainier: Describe GPIO mux on I2C3Andrew Jeffery
We have a 4-bus mux whose output is selected by two GPIO inputs. Wire it up in the devicetree and ensure the output is enabled by hogging the appropriate line. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-28power: supply: sc27xx: prevent adc * 1000 from overflowChunyan Zhang
The input parameter is int type, cause adc * 1000 could overflow. Change to use s64 to avoid this issue. Signed-off-by: Chen Yongzhi <yongzhi.chen@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-07-28math64: New DIV_S64_ROUND_CLOSEST helperChunyan Zhang
Provide DIV_S64_ROUND_CLOSEST helper which uses div_s64 to perform division rounded to the closest integer using signed 64bit dividend and signed 32bit divisor. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-07-27doc/zh_CN: add cpu-load Chinese versionTao Zhou
Add cpu-load Chinese version and link it into admin-guide. Based on Alex's recent thread: https://lkml.kernel.org/r/20200713115807.56362-1-alex.shi@linux.alibaba.com Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Signed-off-by: Tao Zhou <ouwen210@hotmail.com> Link: https://lore.kernel.org/r/BL0PR14MB37798BBF2307910DE73EF6D49A770@BL0PR14MB3779.namprd14.prod.outlook.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-07-27Documentation/admin-guide: tainted-kernels: fix spelling mistakeYue Hu
Fix typo "tis" -> "this". Signed-off-by: Yue Hu <huyue2@yulong.com> Link: https://lore.kernel.org/r/20200725022444.10976-1-zbestahu@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-07-27MAINTAINERS: adjust kprobes.rst entry to new locationLukas Bulwahn
Commit 2165b82fde82 ("docs: Move kprobes.rst from staging/ to trace/") moved kprobes.rst, but missed to adjust the MAINTAINERS entry. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains: warning: no file matches F: Documentation/staging/kprobes.rst Adjust the entry to the new file location. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Link: https://lore.kernel.org/r/20200726055843.10783-1-lukas.bulwahn@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-07-27devices.txt: document rfkill allocationPavel Machek
Document rfkill allocation. Signed-off-by: Pavel Machek (CIP) <pavel@denx.de> Link: https://lore.kernel.org/r/20200726075327.GA25647@duo.ucw.cz Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-07-27PCI: correct flag nameJulia Lawall
RESOURCE_IO does not exist. Rename to IORESOURCE_IO. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1595778455-12132-1-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-07-27docs: filesystems: vfs: correct flag nameJulia Lawall
There is no flag REMAP_CAN_SHORTEN. Commit eca3654e3cc7 ("vfs: enable remap callers that can handle short operations") that introduces this text also introduces the flag REMAP_FILE_CAN_SHORTEN. Change the name in the documentation accordingly. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Fixes: eca3654e3cc7 ("vfs: enable remap callers that can handle short operations") Link: https://lore.kernel.org/r/1595789020-12941-1-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-07-27docs: filesystems: vfs: correct sync_mode flag namesJulia Lawall
Change the nonexistent flag names WBC_SYNC_ALL and WBC_SYNC_NONE to WB_SYNC_ALL and WB_SYNC_NONE, respectively, as used in the code with wbc->sync_mode. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1595791341-13209-1-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Jonathan Corbet <corbet@lwn.net>
generated by cgit (git 2.34.1) at 2025-09-24 14:21:15 +0000