summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-25test_firmware: Test platform fw loading on non-EFI systemsKees Cook
On non-EFI systems, it wasn't possible to test the platform firmware loader because it will have never set "checked_fw" during __init. Instead, allow the test code to override this check. Additionally split the declarations into a private header file so it there is greater enforcement of the symbol visibility. Fixes: 548193cba2a7 ("test_firmware: add support for firmware_request_platform") Cc: stable@vger.kernel.org Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20200724213640.389191-2-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-25x86/defconfigs: Refresh defconfig filesIngo Molnar
Perform a 'make savedefconfig' pass over our main defconfig files, which keeps the defconfig result the same, but compresses the file where defaults were changed, options removed or reordered. Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200724130638.645844-2-mingo@kernel.org
2020-07-25x86/mm: Remove the unused mk_kernel_pgd() #defineIngo Molnar
AFAICS the last uses of directly 'making' kernel PGDs was removed 7 years ago: 8b78c21d72d9: ("x86, 64bit, mm: hibernate use generic mapping_init") Where the explicit PGD walking loop was replaced with kernel_ident_mapping_init() calls. This was then (unnecessarily) carried over through the 5-level paging conversion. Also clean up the 'level' comments a bit, to convey the original, meanwhile somewhat bit-rotten notion, that these are empty comment blocks with no methods to handle any of the levels except the PTE level. Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200724114418.629021-4-mingo@kernel.org
2020-07-25x86/tsc: Remove unused "US_SCALE" and "NS_SCALE" leftover macrosIngo Molnar
Last use of them was removed 13 years ago, when the code was converted to use CYC2NS_SCALE_FACTOR: 53d517cdbaac: ("x86: scale cyc_2_nsec according to CPU frequency") The current TSC code uses the 'struct cyc2ns_data' scaling abstraction, the old fixed scaling approach is long gone. This cleanup also removes the 'arbitralrily' typo from the comment, so win-win. ;-) Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200724114418.629021-3-mingo@kernel.org
2020-07-25x86/ioapic: Remove unused "IOAPIC_AUTO" defineIngo Molnar
Last use was removed more than 5 years ago, in: 5ad274d41c1b: ("x86/irq: Remove unused old IOAPIC irqdomain interfaces") Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200724114418.629021-2-mingo@kernel.org
2020-07-25ARM: dts: keystone-k2g-evm: fix rgmii phy-mode for ksz9031 phyGrygorii Strashko
Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") the networking is broken on keystone-k2g-evm board. The above board have phy-mode = "rgmii-id" and it is worked before because KSZ9031 PHY started with default RGMII internal delays configuration (TX off, RX on 1.2 ns) and MAC provided TX delay by default. After above commit, the KSZ9031 PHY starts handling phy mode properly and enables both RX and TX delays, as result networking is become broken. Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous behavior. Fixes: bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-24riscv: Parse all memory blocks to remove unusable memoryAtish Patra
Currently, maximum physical memory allowed is equal to -PAGE_OFFSET. That's why we remove any memory blocks spanning beyond that size. However, it is done only for memblock containing linux kernel which will not work if there are multiple memblocks. Process all memory blocks to figure out how much memory needs to be removed and remove at the end instead of updating the memblock list in place. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-07-24RISC-V: Do not rely on initrd_start/end computed during early dt parsingAtish Patra
Currently, initrd_start/end are computed during early_init_dt_scan but used during arch_setup. We will get the following panic if initrd is used and CONFIG_DEBUG_VIRTUAL is turned on. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] kernel BUG at arch/riscv/mm/physaddr.c:33! [ 0.000000] Kernel BUG [#1] [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-rc4-00015-ged0b226fed02 #886 [ 0.000000] epc: ffffffe0002058d2 ra : ffffffe0000053f0 sp : ffffffe001001f40 [ 0.000000] gp : ffffffe00106e250 tp : ffffffe001009d40 t0 : ffffffe00107ee28 [ 0.000000] t1 : 0000000000000000 t2 : ffffffe000a2e880 s0 : ffffffe001001f50 [ 0.000000] s1 : ffffffe0001383e8 a0 : ffffffe00c087e00 a1 : 0000000080200000 [ 0.000000] a2 : 00000000010bf000 a3 : ffffffe00106f3c8 a4 : ffffffe0010bf000 [ 0.000000] a5 : ffffffe000000000 a6 : 0000000000000006 a7 : 0000000000000001 [ 0.000000] s2 : ffffffe00106f068 s3 : ffffffe00106f070 s4 : 0000000080200000 [ 0.000000] s5 : 0000000082200000 s6 : 0000000000000000 s7 : 0000000000000000 [ 0.000000] s8 : 0000000080011010 s9 : 0000000080012700 s10: 0000000000000000 [ 0.000000] s11: 0000000000000000 t3 : 000000000001fe30 t4 : 000000000001fe30 [ 0.000000] t5 : 0000000000000000 t6 : ffffffe00107c471 [ 0.000000] status: 0000000000000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.000000] random: get_random_bytes called from print_oops_end_marker+0x22/0x46 with crng_init=0 To avoid the error, initrd_start/end can be computed from phys_initrd_start/size in setup itself. It also improves the initrd placement by aligning the start and size with the page size. Fixes: 76d2a0493a17 ("RISC-V: Init and Halt Code") Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-07-24drivers/net/wan: lapb: Corrected the usage of skb_cowXie He
This patch fixed 2 issues with the usage of skb_cow in LAPB drivers "lapbether" and "hdlc_x25": 1) After skb_cow fails, kfree_skb should be called to drop a reference to the skb. But in both drivers, kfree_skb is not called. 2) skb_cow should be called before skb_push so that is can ensure the safety of skb_push. But in "lapbether", it is incorrectly called after skb_push. More details about these 2 issues: 1) The behavior of calling kfree_skb on failure is also the behavior of netif_rx, which is called by this function with "return netif_rx(skb);". So this function should follow this behavior, too. 2) In "lapbether", skb_cow is called after skb_push. This results in 2 logical issues: a) skb_push is not protected by skb_cow; b) An extra headroom of 1 byte is ensured after skb_push. This extra headroom has no use in this function. It also has no use in the upper-layer function that this function passes the skb to (x25_lapb_receive_frame in net/x25/x25_dev.c). So logically skb_cow should instead be called before skb_push. Cc: Eric Dumazet <edumazet@google.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24Merge branch 'net-dsa-mv88e6xxx-port-mtu-support'David S. Miller
Chris Packham says: ==================== net: dsa: mv88e6xxx: port mtu support This series connects up the mv88e6xxx switches to the dsa infrastructure for configuring the port MTU. The first patch is also a bug fix which might be a candiatate for stable. I've rebased this series on top of net-next/master to pick up Andrew's change for the gigabit switches. Patch 1 and 2 are unchanged (aside from adding Andrew's Reviewed-by). Patch 3 is reworked to make use of the existing mtu support. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24net: dsa: mv88e6xxx: Use chip-wide max frame size for MTUChris Packham
Some of the chips in the mv88e6xxx family don't support jumbo configuration per port. But they do have a chip-wide max frame size that can be used. Use this to approximate the behaviour of configuring a port based MTU. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24net: dsa: mv88e6xxx: Support jumbo configuration on 6190/6190XChris Packham
The MV88E6190 and MV88E6190X both support per port jumbo configuration just like the other GE switches. Install the appropriate ops. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24net: dsa: mv88e6xxx: MV88E6097 does not support jumbo configurationChris Packham
The MV88E6097 chip does not support configuring jumbo frames. Prior to commit 5f4366660d65 only the 6352, 6351, 6165 and 6320 chips configured jumbo mode. The refactor accidentally added the function for the 6097. Remove the erroneous function pointer assignment. Fixes: 5f4366660d65 ("net: dsa: mv88e6xxx: Refactor setting of jumbo frames") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24dev: Defer free of skbs in flush_backlogSubash Abhinov Kasiviswanathan
IRQs are disabled when freeing skbs in input queue. Use the IRQ safe variant to free skbs here. Fixes: 145dd5f9c88f ("net: flush the softnet backlog in process context") Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24scsi: mvsas: Move 'core_nr' inside #ifdef and remove unused variable 'res_flag'Lee Jones
Only declare 'core_nr' if its conditions for use are met. Fixes the following W=1 kernel build warning(s): drivers/scsi/mvsas/mv_init.c: In function ‘mvs_interrupt’: drivers/scsi/mvsas/mv_init.c:180:6: warning: variable ‘core_nr’ set but not used [-Wunused-but-set-variable] drivers/scsi/mvsas/mv_init.c: In function ‘mvs_ioremap’: drivers/scsi/mvsas/mv_init.c:302:36: warning: variable ‘res_flag’ set but not used [-Wunused-but-set-variable] [mkp: applied follow-up fixup patch] Link: https://lore.kernel.org/r/20200721164148.2617584-40-lee.jones@linaro.org Cc: Jason Yan <yanaijie@huawei.com> Cc: Marvell <kewei@marvell.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: esas2r: Demote a few non-conformant kerneldoc headersLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/esas2r/esas2r_log.c:86: warning: Function parameter or member 'level' not described in 'translate_esas2r_event_level_to_kernel' drivers/scsi/esas2r/esas2r_log.c:120: warning: Function parameter or member 'level' not described in 'esas2r_log_master' drivers/scsi/esas2r/esas2r_log.c:120: warning: Function parameter or member 'dev' not described in 'esas2r_log_master' drivers/scsi/esas2r/esas2r_log.c:120: warning: Function parameter or member 'format' not described in 'esas2r_log_master' drivers/scsi/esas2r/esas2r_log.c:120: warning: Function parameter or member 'args' not described in 'esas2r_log_master' drivers/scsi/esas2r/esas2r_log.c:183: warning: Function parameter or member 'level' not described in 'esas2r_log' drivers/scsi/esas2r/esas2r_log.c:183: warning: Function parameter or member 'format' not described in 'esas2r_log' drivers/scsi/esas2r/esas2r_log.c:211: warning: Function parameter or member 'level' not described in 'esas2r_log_dev' drivers/scsi/esas2r/esas2r_log.c:211: warning: Function parameter or member 'dev' not described in 'esas2r_log_dev' drivers/scsi/esas2r/esas2r_log.c:211: warning: Function parameter or member 'format' not described in 'esas2r_log_dev' drivers/scsi/esas2r/esas2r_log.c:237: warning: Function parameter or member 'level' not described in 'esas2r_log_hexdump' drivers/scsi/esas2r/esas2r_log.c:237: warning: Function parameter or member 'buf' not described in 'esas2r_log_hexdump' drivers/scsi/esas2r/esas2r_log.c:237: warning: Function parameter or member 'len' not described in 'esas2r_log_hexdump' Link: https://lore.kernel.org/r/20200723122446.1329773-41-lee.jones@linaro.org Cc: Bradley Grove <linuxdrivers@attotech.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: bnx2i: Add parameter description and rename anotherLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/bnx2i/bnx2i_iscsi.c:1288: warning: Function parameter or member 'cmds_max' not described in 'bnx2i_session_create' drivers/scsi/bnx2i/bnx2i_iscsi.c:2176: warning: Function parameter or member 'params' not described in 'bnx2i_nl_set_path' drivers/scsi/bnx2i/bnx2i_iscsi.c:2176: warning: Excess function parameter 'buf' description in 'bnx2i_nl_set_path' Link: https://lore.kernel.org/r/20200723122446.1329773-40-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Cc: Anil Veerabhadrappa <anilgv@broadcom.com> Cc: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: bfa: Ensure a blank line precedes next function/headerLee Jones
Fixes the following checkpatch warning: CHECK: Please use a blank line after function/struct/union/enum declarations #129: FILE: drivers/scsi/bfa/bfa_ioc.c:6913: } +/* Link: https://lore.kernel.org/r/20200723122446.1329773-39-lee.jones@linaro.org Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: qedi: Staticify non-external function 'qedi_get_iscsi_error'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/qedi/qedi_iscsi.c:1549:7: warning: no previous prototype for ‘qedi_get_iscsi_error’ [-Wmissing-prototypes] Link: https://lore.kernel.org/r/20200723122446.1329773-38-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@cavium.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: qedi: Demote seemingly unintentional kerneldoc headerLee Jones
This is the only use of kerneldoc in the source file and no descriptions are provided. Fixes the following W=1 kernel build warning(s): drivers/scsi/qedi/qedi_main.c:1969: warning: Function parameter or member 'qedi' not described in 'qedi_get_nvram_block' Link: https://lore.kernel.org/r/20200723122446.1329773-37-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@cavium.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: bfa: Demote seemingly unintentional kerneldoc headerLee Jones
This is the only use of kerneldoc in the source file and no descriptions are provided. Also demote standard comment. Fixes the following W=1 kernel build warning(s): drivers/scsi/bfa/bfa_svc.c:3847: warning: Function parameter or member 'bfa' not described in 'bfa_fcport_get_cfg_topology' Link: https://lore.kernel.org/r/20200723122446.1329773-36-lee.jones@linaro.org Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: bfa: Demote seemingly unintentional kerneldoc headerLee Jones
This is the only use of kerneldoc in the source file and no descriptions are provided. Fixes the following W=1 kernel build warning(s): drivers/scsi/bfa/bfa_core.c:1245: warning: Function parameter or member 'bfa' not described in 'bfa_iocfc_qreg' drivers/scsi/bfa/bfa_core.c:1245: warning: Function parameter or member 'qreg' not described in 'bfa_iocfc_qreg' Link: https://lore.kernel.org/r/20200723122446.1329773-35-lee.jones@linaro.org Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: bfa: Demote non-kerneldoc headers down to standard comment blocksLee Jones
This is probably historical (Doxygen?). Fixes the following W=1 kernel build warning(s): drivers/scsi/bfa/bfa_ioc.c:6646: warning: Cannot understand * @brief hardware error definition drivers/scsi/bfa/bfa_ioc.c:6661: warning: Cannot understand * @brief flash command register data structure drivers/scsi/bfa/bfa_ioc.c:6685: warning: Cannot understand * @brief flash device status register data structure drivers/scsi/bfa/bfa_ioc.c:6711: warning: Cannot understand * @brief flash address register data structure drivers/scsi/bfa/bfa_ioc.c:6732: warning: Function parameter or member 'pci_bar' not described in 'bfa_flash_set_cmd' drivers/scsi/bfa/bfa_ioc.c:6732: warning: Function parameter or member 'wr_cnt' not described in 'bfa_flash_set_cmd' drivers/scsi/bfa/bfa_ioc.c:6732: warning: Function parameter or member 'rd_cnt' not described in 'bfa_flash_set_cmd' drivers/scsi/bfa/bfa_ioc.c:6732: warning: Function parameter or member 'ad_cnt' not described in 'bfa_flash_set_cmd' drivers/scsi/bfa/bfa_ioc.c:6732: warning: Function parameter or member 'op' not described in 'bfa_flash_set_cmd' drivers/scsi/bfa/bfa_ioc.c:6768: warning: Cannot understand * @brief drivers/scsi/bfa/bfa_ioc.c:6807: warning: Cannot understand * @brief drivers/scsi/bfa/bfa_ioc.c:6852: warning: Cannot understand * @brief drivers/scsi/bfa/bfa_ioc.c:6898: warning: Cannot understand * @brief drivers/scsi/bfa/bfa_ioc.c:6914: warning: Cannot understand * @brief drivers/scsi/bfa/bfa_ioc.c:6940: warning: Cannot understand * @brief Link: https://lore.kernel.org/r/20200723122446.1329773-34-lee.jones@linaro.org Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: esas2r: Add braces around the one-line if()Lee Jones
In certain configurations esas2r_bugon() is sometimes NULLed by the compiler. Fixes the following W=1 kernel build warning(s): In file included from drivers/scsi/esas2r/esas2r_log.c:44: drivers/scsi/esas2r/esas2r.h: In function ‘esas2r_rq_init_request’: drivers/scsi/esas2r/esas2r.h:1229:17: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] 1229 | esas2r_bugon(); | ^ NB: Lots of these - snipped for brevity Link: https://lore.kernel.org/r/20200723122446.1329773-33-lee.jones@linaro.org Cc: Bradley Grove <linuxdrivers@attotech.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: qedi: Remove set but unused variable 'tmp'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/qedi/qedi_fw.c: In function ‘qedi_put_rq_bdq_buf’: drivers/scsi/qedi/qedi_fw.c:355:6: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20200723122446.1329773-32-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@cavium.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: be2iscsi: Correct misdocumentation of function param 'ep'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/be2iscsi/be_iscsi.c:1042: warning: Function parameter or member 'ep' not described in 'beiscsi_open_conn' drivers/scsi/be2iscsi/be_iscsi.c:1042: warning: Excess function parameter 'beiscsi_ep' description in 'beiscsi_open_conn' Link: https://lore.kernel.org/r/20200723122446.1329773-31-lee.jones@linaro.org Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com> Cc: Ketan Mukadam <ketan.mukadam@broadcom.com> Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: linux-drivers@broadcom.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: bnx2i: Add, remove and edit some function parameter descriptionsLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/bnx2i/bnx2i_iscsi.c:241: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_bind_conn_to_iscsi_cid' drivers/scsi/bnx2i/bnx2i_iscsi.c:241: warning: Excess function parameter 'conn' description in 'bnx2i_bind_conn_to_iscsi_cid' drivers/scsi/bnx2i/bnx2i_iscsi.c:470: warning: Excess function parameter 'cmd' description in 'bnx2i_destroy_cmd_pool' drivers/scsi/bnx2i/bnx2i_iscsi.c:595: warning: Function parameter or member 'cls_session' not described in 'bnx2i_drop_session' drivers/scsi/bnx2i/bnx2i_iscsi.c:595: warning: Excess function parameter 'hba' description in 'bnx2i_drop_session' drivers/scsi/bnx2i/bnx2i_iscsi.c:595: warning: Excess function parameter 'session' description in 'bnx2i_drop_session' drivers/scsi/bnx2i/bnx2i_iscsi.c:1290: warning: Function parameter or member 'ep' not described in 'bnx2i_session_create' drivers/scsi/bnx2i/bnx2i_iscsi.c:1979: warning: Function parameter or member 'bnx2i_ep' not described in 'bnx2i_ep_tcp_conn_active' drivers/scsi/bnx2i/bnx2i_iscsi.c:1979: warning: Excess function parameter 'ep' description in 'bnx2i_ep_tcp_conn_active' drivers/scsi/bnx2i/bnx2i_iscsi.c:2178: warning: Function parameter or member 'shost' not described in 'bnx2i_nl_set_path' drivers/scsi/bnx2i/bnx2i_iscsi.c:2178: warning: Function parameter or member 'params' not described in 'bnx2i_nl_set_path' drivers/scsi/bnx2i/bnx2i_iscsi.c:2178: warning: Excess function parameter 'buf' description in 'bnx2i_nl_set_path' Link: https://lore.kernel.org/r/20200723122446.1329773-30-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Cc: Anil Veerabhadrappa <anilgv@broadcom.com> Cc: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: bnx2i: Fix a whole host of kerneldoc issuesLee Jones
Mainly renames and docrot issues. Fixes the following W=1 kernel build warning(s): drivers/scsi/bnx2i/bnx2i_hwi.c:194: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_get_rq_buf' drivers/scsi/bnx2i/bnx2i_hwi.c:194: warning: Excess function parameter 'conn' description in 'bnx2i_get_rq_buf' drivers/scsi/bnx2i/bnx2i_hwi.c:232: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_put_rq_buf' drivers/scsi/bnx2i/bnx2i_hwi.c:232: warning: Excess function parameter 'conn' description in 'bnx2i_put_rq_buf' drivers/scsi/bnx2i/bnx2i_hwi.c:269: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_ring_sq_dbell' drivers/scsi/bnx2i/bnx2i_hwi.c:269: warning: Excess function parameter 'conn' description in 'bnx2i_ring_sq_dbell' drivers/scsi/bnx2i/bnx2i_hwi.c:293: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_ring_dbell_update_sq_params' drivers/scsi/bnx2i/bnx2i_hwi.c:293: warning: Excess function parameter 'conn' description in 'bnx2i_ring_dbell_update_sq_params' drivers/scsi/bnx2i/bnx2i_hwi.c:331: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_login' drivers/scsi/bnx2i/bnx2i_hwi.c:331: warning: Function parameter or member 'task' not described in 'bnx2i_send_iscsi_login' drivers/scsi/bnx2i/bnx2i_hwi.c:331: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_login' drivers/scsi/bnx2i/bnx2i_hwi.c:331: warning: Excess function parameter 'cmd' description in 'bnx2i_send_iscsi_login' drivers/scsi/bnx2i/bnx2i_hwi.c:384: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_tmf' drivers/scsi/bnx2i/bnx2i_hwi.c:384: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_tmf' drivers/scsi/bnx2i/bnx2i_hwi.c:458: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_text' drivers/scsi/bnx2i/bnx2i_hwi.c:458: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_text' drivers/scsi/bnx2i/bnx2i_hwi.c:506: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_scsicmd' drivers/scsi/bnx2i/bnx2i_hwi.c:506: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_scsicmd' drivers/scsi/bnx2i/bnx2i_hwi.c:533: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_nopout' drivers/scsi/bnx2i/bnx2i_hwi.c:533: warning: Function parameter or member 'task' not described in 'bnx2i_send_iscsi_nopout' drivers/scsi/bnx2i/bnx2i_hwi.c:533: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_nopout' drivers/scsi/bnx2i/bnx2i_hwi.c:533: warning: Excess function parameter 'cmd' description in 'bnx2i_send_iscsi_nopout' drivers/scsi/bnx2i/bnx2i_hwi.c:590: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_logout' drivers/scsi/bnx2i/bnx2i_hwi.c:590: warning: Function parameter or member 'task' not described in 'bnx2i_send_iscsi_logout' drivers/scsi/bnx2i/bnx2i_hwi.c:590: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_logout' drivers/scsi/bnx2i/bnx2i_hwi.c:590: warning: Excess function parameter 'cmd' description in 'bnx2i_send_iscsi_logout' drivers/scsi/bnx2i/bnx2i_hwi.c:686: warning: Function parameter or member 't' not described in 'bnx2i_ep_ofld_timer' drivers/scsi/bnx2i/bnx2i_hwi.c:686: warning: Excess function parameter 'data' description in 'bnx2i_ep_ofld_timer' drivers/scsi/bnx2i/bnx2i_hwi.c:1672: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_unsol_pdu_adjust_rq' drivers/scsi/bnx2i/bnx2i_hwi.c:1672: warning: Excess function parameter 'conn' description in 'bnx2i_unsol_pdu_adjust_rq' drivers/scsi/bnx2i/bnx2i_hwi.c:1900: warning: Function parameter or member 'session' not described in 'bnx2i_queue_scsi_cmd_resp' drivers/scsi/bnx2i/bnx2i_hwi.c:1900: warning: Function parameter or member 'cqe' not described in 'bnx2i_queue_scsi_cmd_resp' drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Function parameter or member 'context' not described in 'bnx2i_indicate_kcqe' drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Function parameter or member 'kcqe' not described in 'bnx2i_indicate_kcqe' drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Function parameter or member 'num_cqe' not described in 'bnx2i_indicate_kcqe' drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Excess function parameter 'hba' description in 'bnx2i_indicate_kcqe' drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Excess function parameter 'update_kcqe' description in 'bnx2i_indicate_kcqe' drivers/scsi/bnx2i/bnx2i_hwi.c:2624: warning: Function parameter or member 'cm_sk' not described in 'bnx2i_cm_remote_close' drivers/scsi/bnx2i/bnx2i_hwi.c:2624: warning: Excess function parameter 'hba' description in 'bnx2i_cm_remote_close' drivers/scsi/bnx2i/bnx2i_hwi.c:2624: warning: Excess function parameter 'update_kcqe' description in 'bnx2i_cm_remote_close' drivers/scsi/bnx2i/bnx2i_hwi.c:2641: warning: Function parameter or member 'cm_sk' not described in 'bnx2i_cm_remote_abort' drivers/scsi/bnx2i/bnx2i_hwi.c:2641: warning: Excess function parameter 'hba' description in 'bnx2i_cm_remote_abort' drivers/scsi/bnx2i/bnx2i_hwi.c:2641: warning: Excess function parameter 'update_kcqe' description in 'bnx2i_cm_remote_abort' drivers/scsi/bnx2i/bnx2i_hwi.c:2677: warning: cannot understand function prototype: 'struct cnic_ulp_ops bnx2i_cnic_cb = ' Link: https://lore.kernel.org/r/20200723122446.1329773-29-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Cc: Anil Veerabhadrappa <anilgv@broadcom.com> Cc: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: bfa: Remove unused variable 'adisc'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/bfa/bfa_fcs_rport.c: In function ‘bfa_fcs_rport_process_adisc’: drivers/scsi/bfa/bfa_fcs_rport.c:2243:21: warning: variable ‘adisc’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20200723122446.1329773-28-lee.jones@linaro.org Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: bfa: Demote non-compliant kerneldoc headers to standard commentsLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/bfa/bfa_ioc_ct.c:504: warning: Function parameter or member 'ioc' not described in 'bfa_ioc_set_ctx_hwif' drivers/scsi/bfa/bfa_ioc_ct.c:504: warning: Function parameter or member 'hwif' not described in 'bfa_ioc_set_ctx_hwif' drivers/scsi/bfa/bfa_ioc_ct.c:525: warning: Function parameter or member 'ioc' not described in 'bfa_ioc_set_ct_hwif' drivers/scsi/bfa/bfa_ioc_ct.c:540: warning: Function parameter or member 'ioc' not described in 'bfa_ioc_set_ct2_hwif' Link: https://lore.kernel.org/r/20200723122446.1329773-26-lee.jones@linaro.org Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: csiostor: Add missing description for csio_rnode_fwevt_handler()'s ↵Lee Jones
'fwevt' param Fixes the following W=1 kernel build warning(s): drivers/scsi/csiostor/csio_rnode.c:869: warning: Function parameter or member 'fwevt' not described in 'csio_rnode_fwevt_handler' Link: https://lore.kernel.org/r/20200723122446.1329773-25-lee.jones@linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: bfa: Staticify non-external functionsLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/bfa/bfa_ioc.c:5023:1: warning: no previous prototype for ‘bfa_diag_intr’ [-Wmissing-prototypes] 5023 | bfa_diag_intr(void *diagarg, struct bfi_mbmsg_s *msg) | ^~~~~~~~~~~~~ drivers/scsi/bfa/bfa_ioc.c:6966:1: warning: no previous prototype for ‘bfa_flash_sem_get’ [-Wmissing-prototypes] 6966 | bfa_flash_sem_get(void __iomem *bar) | ^~~~~~~~~~~~~~~~~ drivers/scsi/bfa/bfa_ioc.c:6979:1: warning: no previous prototype for ‘bfa_flash_sem_put’ [-Wmissing-prototypes] 6979 | bfa_flash_sem_put(void __iomem *bar) | ^~~~~~~~~~~~~~~~~ Link: https://lore.kernel.org/r/20200723122446.1329773-24-lee.jones@linaro.org Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: csiostor: Remove 2 unused variables {mc,edc}_bist_status_rdata_regLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/csiostor/csio_hw_t5.c: In function ‘csio_t5_mc_read’: drivers/scsi/csiostor/csio_hw_t5.c:151:11: warning: variable ‘mc_bist_status_rdata_reg’ set but not used [-Wunused-but-set-variable] 151 | uint32_t mc_bist_status_rdata_reg, mc_bist_data_pattern_reg; | ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/csiostor/csio_hw_t5.c: In function ‘csio_t5_edc_read’: drivers/scsi/csiostor/csio_hw_t5.c:199:38: warning: variable ‘edc_bist_status_rdata_reg’ set but not used [-Wunused-but-set-variable] 199 | uint32_t edc_bist_cmd_data_pattern, edc_bist_status_rdata_reg; | ^~~~~~~~~~~~~~~~~~~~~~~~~ Link: https://lore.kernel.org/r/20200723122446.1329773-23-lee.jones@linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: csiostor: Mark known unused variable as __always_unusedLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/csiostor/csio_hw.c: In function ‘csio_hw_get_vpd_params’: drivers/scsi/csiostor/csio_hw.c:309:8: warning: variable ‘s’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20200723122446.1329773-22-lee.jones@linaro.org Cc: Arkadiusz Drabczyk <arkadiusz@drabczyk.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: bfa: Remove a few unused variables 'pgoff' and 't'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_iocpf_sm_fwcheck_entry’: drivers/scsi/bfa/bfa_ioc.c:704:27: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable] drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_ioc_fwver_get’: drivers/scsi/bfa/bfa_ioc.c:1443:13: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable] drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_ioc_fwsig_invalidate’: drivers/scsi/bfa/bfa_ioc.c:1665:13: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable] drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_ioc_download_fw’: drivers/scsi/bfa/bfa_ioc.c:1866:13: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable] drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_diag_memtest_done’: drivers/scsi/bfa/bfa_ioc.c:4766:13: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable] drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_flash_fifo_flush’: drivers/scsi/bfa/bfa_ioc.c:6787:6: warning: variable ‘t’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20200723122446.1329773-21-lee.jones@linaro.org Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: lpfc: Add description for lpfc_release_rpi()'s 'ndlpl paramLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/lpfc/lpfc_nportdisc.c:1079: warning: Function parameter or member 'ndlp' not described in 'lpfc_release_rpi' Link: https://lore.kernel.org/r/20200723122446.1329773-20-lee.jones@linaro.org Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: lpfc: Fix a bunch of kerneldoc misdemeanorsLee Jones
Adding, removing and correcting function parameter descriptions. Fixes the following W=1 kernel build warning(s): drivers/scsi/lpfc/lpfc_mbox.c:886: warning: Function parameter or member 'vport' not described in 'lpfc_reg_vpi' drivers/scsi/lpfc/lpfc_mbox.c:886: warning: Excess function parameter 'phba' description in 'lpfc_reg_vpi' drivers/scsi/lpfc/lpfc_mbox.c:886: warning: Excess function parameter 'vpi' description in 'lpfc_reg_vpi' drivers/scsi/lpfc/lpfc_mbox.c:886: warning: Excess function parameter 'sid' description in 'lpfc_reg_vpi' drivers/scsi/lpfc/lpfc_mbox.c:1218: warning: Function parameter or member 'ring' not described in 'lpfc_config_ring' drivers/scsi/lpfc/lpfc_mbox.c:1626: warning: Function parameter or member 'mboxq' not described in 'lpfc_mbox_tmo_val' drivers/scsi/lpfc/lpfc_mbox.c:1626: warning: Excess function parameter 'cmd' description in 'lpfc_mbox_tmo_val' drivers/scsi/lpfc/lpfc_mbox.c:1710: warning: Function parameter or member 'sge' not described in 'lpfc_sli4_mbx_sge_get' drivers/scsi/lpfc/lpfc_mbox.c:1780: warning: Function parameter or member 'emb' not described in 'lpfc_sli4_config' drivers/scsi/lpfc/lpfc_mbox.c:2027: warning: Function parameter or member 'mboxq' not described in 'lpfc_sli4_mbx_read_fcf_rec' drivers/scsi/lpfc/lpfc_mbox.c:2078: warning: Function parameter or member 'phba' not described in 'lpfc_request_features' Link: https://lore.kernel.org/r/20200723122446.1329773-19-lee.jones@linaro.org Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: qla4xxx: Rename function parameter descriptionsLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/qla4xxx/ql4_bsg.c:811: warning: Function parameter or member 'bsg_job' not described in 'qla4xxx_process_vendor_specific' drivers/scsi/qla4xxx/ql4_bsg.c:811: warning: Excess function parameter 'job' description in 'qla4xxx_process_vendor_specific' drivers/scsi/qla4xxx/ql4_bsg.c:858: warning: Function parameter or member 'bsg_job' not described in 'qla4xxx_bsg_request' drivers/scsi/qla4xxx/ql4_bsg.c:858: warning: Excess function parameter 'job' description in 'qla4xxx_bsg_request' Link: https://lore.kernel.org/r/20200723122446.1329773-18-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: lpfc: Add and rename a whole bunch of function parameter descriptionsLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/lpfc/lpfc_init.c:1136: warning: Function parameter or member 't' not described in 'lpfc_hb_timeout' drivers/scsi/lpfc/lpfc_init.c:1136: warning: Excess function parameter 'ptr' description in 'lpfc_hb_timeout' drivers/scsi/lpfc/lpfc_init.c:1170: warning: Function parameter or member 't' not described in 'lpfc_rrq_timeout' drivers/scsi/lpfc/lpfc_init.c:1170: warning: Excess function parameter 'ptr' description in 'lpfc_rrq_timeout' drivers/scsi/lpfc/lpfc_init.c:1232: warning: Function parameter or member 'work' not described in 'lpfc_idle_stat_delay_work' drivers/scsi/lpfc/lpfc_init.c:1817: warning: Function parameter or member 'en_rn_msg' not described in 'lpfc_sli4_port_sta_fn_reset' drivers/scsi/lpfc/lpfc_init.c:3033: warning: Function parameter or member 'mbx_action' not described in 'lpfc_block_mgmt_io' drivers/scsi/lpfc/lpfc_init.c:3481: warning: Function parameter or member 'mbx_action' not described in 'lpfc_offline_prep' drivers/scsi/lpfc/lpfc_init.c:4150: warning: Function parameter or member 'phba' not described in 'lpfc_new_io_buf' drivers/scsi/lpfc/lpfc_init.c:4150: warning: Function parameter or member 'num_to_alloc' not described in 'lpfc_new_io_buf' drivers/scsi/lpfc/lpfc_init.c:4150: warning: Excess function parameter 'vport' description in 'lpfc_new_io_buf' drivers/scsi/lpfc/lpfc_init.c:4150: warning: Excess function parameter 'num_to_allocate' description in 'lpfc_new_io_buf' drivers/scsi/lpfc/lpfc_init.c:4736: warning: Function parameter or member 't' not described in 'lpfc_sli4_fcf_redisc_wait_tmo' drivers/scsi/lpfc/lpfc_init.c:4736: warning: Excess function parameter 'ptr' description in 'lpfc_sli4_fcf_redisc_wait_tmo' drivers/scsi/lpfc/lpfc_init.c:5103: warning: Excess function parameter 'evt_code' description in 'lpfc_async_link_speed_to_read_top' drivers/scsi/lpfc/lpfc_init.c:5377: warning: Function parameter or member 'acqe_sli' not described in 'lpfc_sli4_async_sli_evt' drivers/scsi/lpfc/lpfc_init.c:5377: warning: Excess function parameter 'acqe_fc' description in 'lpfc_sli4_async_sli_evt' drivers/scsi/lpfc/lpfc_init.c:5634: warning: Function parameter or member 'phba' not described in 'lpfc_sli4_perform_all_vport_cvl' drivers/scsi/lpfc/lpfc_init.c:5634: warning: Excess function parameter 'vport' description in 'lpfc_sli4_perform_all_vport_cvl' drivers/scsi/lpfc/lpfc_init.c:5655: warning: Function parameter or member 'acqe_fip' not described in 'lpfc_sli4_async_fip_evt' drivers/scsi/lpfc/lpfc_init.c:5655: warning: Excess function parameter 'acqe_link' description in 'lpfc_sli4_async_fip_evt' drivers/scsi/lpfc/lpfc_init.c:5908: warning: Function parameter or member 'acqe_dcbx' not described in 'lpfc_sli4_async_dcbx_evt' drivers/scsi/lpfc/lpfc_init.c:5908: warning: Excess function parameter 'acqe_link' description in 'lpfc_sli4_async_dcbx_evt' drivers/scsi/lpfc/lpfc_init.c:5927: warning: Function parameter or member 'acqe_grp5' not described in 'lpfc_sli4_async_grp5_evt' drivers/scsi/lpfc/lpfc_init.c:5927: warning: Excess function parameter 'acqe_link' description in 'lpfc_sli4_async_grp5_evt' drivers/scsi/lpfc/lpfc_init.c:7279: warning: Function parameter or member 'iocb_count' not described in 'lpfc_init_iocb_list' drivers/scsi/lpfc/lpfc_init.c:8227: warning: Function parameter or member 'if_type' not described in 'lpfc_sli4_bar1_register_memmap' drivers/scsi/lpfc/lpfc_init.c:8414: warning: Excess function parameter 'phba' description in 'LINK_FLAGS_DEF' drivers/scsi/lpfc/lpfc_init.c:8414: warning: Excess function parameter 'rdconf' description in 'LINK_FLAGS_DEF' drivers/scsi/lpfc/lpfc_init.c:10734: warning: Function parameter or member 'cfg_mode' not described in 'lpfc_sli_enable_intr' drivers/scsi/lpfc/lpfc_init.c:11241: warning: Function parameter or member 'eqlist' not described in 'lpfc_cpuhp_get_eq' drivers/scsi/lpfc/lpfc_init.c:11726: warning: Function parameter or member 'cfg_mode' not described in 'lpfc_sli4_enable_intr' drivers/scsi/lpfc/lpfc_init.c:12997: warning: Excess function parameter 'ret' description in 'lpfc_write_firmware' drivers/scsi/lpfc/lpfc_init.c:13103: warning: Function parameter or member 'fw_upgrade' not described in 'lpfc_sli4_request_firmware_update' Link: https://lore.kernel.org/r/20200723122446.1329773-17-lee.jones@linaro.org Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: lpfc: Use __printf() format notationLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/lpfc/lpfc_init.c: In function ‘lpfc_dbg_print’: drivers/scsi/lpfc/lpfc_init.c:14212:6: warning: function ‘lpfc_dbg_print’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format] 14212 | sizeof(phba->dbg_log[idx].log), fmt, args); | ^~~~~~ Link: https://lore.kernel.org/r/20200723122446.1329773-16-lee.jones@linaro.org Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: qla4xxx: Remove set but unused variable 'status'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/qla4xxx/ql4_83xx.c: In function ‘qla4_83xx_dump_pause_control_regs’: drivers/scsi/qla4xxx/ql4_83xx.c:1409:9: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] 1409 | int i, status = QLA_SUCCESS; | ^~~~~~ Link: https://lore.kernel.org/r/20200723122446.1329773-15-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: ips: Convert strnlen() to memcpy() since result should not be NUL ↵Lee Jones
terminated Fixes the following W=1 kernel build warning(s): In file included from arch/arm/include/asm/io.h:23, from drivers/scsi/ips.c:164: In function ‘strncpy’, inlined from ‘ips_send_cmd’ at drivers/scsi/ips.c:3522:6: include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ output truncated before terminating nul cop ying 4 bytes from a string of the same length [-Wstringop-truncation] 297 | #define __underlying_strncpy __builtin_strncpy | ^ include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’ 307 | return __underlying_strncpy(p, q, size); | ^~~~~~~~~~~~~~~~~~~~ NB: Lots of these - snipping for brevity Link: https://lore.kernel.org/r/20200723122446.1329773-14-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: ipslinux@adaptec.com Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: ips: Remove some set but unused variablesLee Jones
Intentionally keeping all register reads/writes. Fixes the following W=1 kernel build warning(s): drivers/scsi/ips.c: In function ‘ips_init_copperhead’: drivers/scsi/ips.c:4700:10: warning: variable ‘ConfigByte’ set but not used [-Wunused-but-set-variable] 4700 | uint8_t ConfigByte[IPS_MAX_CONFIG_BYTES]; | ^~~~~~~~~~ drivers/scsi/ips.c: In function ‘ips_init_copperhead_memio’: drivers/scsi/ips.c:4794:10: warning: variable ‘ConfigByte’ set but not used [-Wunused-but-set-variable] 4794 | uint8_t ConfigByte[IPS_MAX_CONFIG_BYTES]; | ^~~~~~~~~~ drivers/scsi/ips.c: In function ‘ips_init_phase1’: drivers/scsi/ips.c:6839:10: warning: variable ‘func’ set but not used [-Wunused-but-set-variable] 6839 | uint8_t func; | ^~~~ drivers/scsi/ips.c:6838:10: warning: variable ‘bus’ set but not used [-Wunused-but-set-variable] 6838 | uint8_t bus; | ^~~ Link: https://lore.kernel.org/r/20200723122446.1329773-13-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: ipslinux@adaptec.com Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: qedi: Remove 2 set but unused variablesLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/qedi/qedi_main.c: In function ‘qedi_queue_cqe’: drivers/scsi/qedi/qedi_main.c:1158:21: warning: variable ‘conn’ set but not used [-Wunused-but-set-variable] 1158 | struct iscsi_conn *conn; | ^~~~ drivers/scsi/qedi/qedi_main.c: In function ‘__qedi_probe’: drivers/scsi/qedi/qedi_main.c:2432:6: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable] 2432 | u16 tmp; | ^~~ Link: https://lore.kernel.org/r/20200723122446.1329773-12-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@cavium.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: bfa: Demote seemingly unintentional kerneldoc headerLee Jones
This is the only use of kerneldoc in the source file and no descriptions are provided. Fixes the following W=1 kernel build warning(s): drivers/scsi/bfa/bfa_fcpim.c:3829: warning: Function parameter or member 'bfa' not described in 'bfa_fcpim_get_throttle_cfg' drivers/scsi/bfa/bfa_fcpim.c:3829: warning: Function parameter or member 'drv_cfg_param' not described in 'bfa_fcpim_get_throttle_cfg' Link: https://lore.kernel.org/r/20200723122446.1329773-11-lee.jones@linaro.org Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: bfa: Remove set but unused variable 'rp'Lee Jones
This change subsequently makes 'rp_fcs' unused also. Remove that too. Fixes the following W=1 kernel build warning(s): drivers/scsi/bfa/bfa_fcpim.c: In function ‘bfa_fcpim_lunmask_delete’: drivers/scsi/bfa/bfa_fcpim.c:2338:22: warning: variable ‘rp’ set but not used [-Wunused-but-set-variable] 2338 | struct bfa_rport_s *rp = NULL; | ^~ Link: https://lore.kernel.org/r/20200723122446.1329773-10-lee.jones@linaro.org Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: bnx2i: Add missing descriptions for 'attr' parameterLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/bnx2i/bnx2i_sysfs.c:40: warning: Function parameter or member 'attr' not described in 'bnx2i_show_sq_info' drivers/scsi/bnx2i/bnx2i_sysfs.c:60: warning: Function parameter or member 'attr' not described in 'bnx2i_set_sq_info' drivers/scsi/bnx2i/bnx2i_sysfs.c:96: warning: Function parameter or member 'attr' not described in 'bnx2i_show_ccell_info' drivers/scsi/bnx2i/bnx2i_sysfs.c:114: warning: Function parameter or member 'attr' not described in 'bnx2i_set_ccell_info' Link: https://lore.kernel.org/r/20200723122446.1329773-9-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Cc: Anil Veerabhadrappa <anilgv@broadcom.com> Cc: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: bfa: Staticify local functionsLee Jones
These calls are not invoked externally. Fixes the following W=1 kernel build warning(s): drivers/scsi/bfa/bfa_port.c:760:1: warning: no previous prototype for ‘bfa_cee_isr’ [-Wmissing-prototypes] 760 | bfa_cee_isr(void *cbarg, struct bfi_mbmsg_s *m) | ^~~~~~~~~~~ drivers/scsi/bfa/bfa_port.c:796:1: warning: no previous prototype for ‘bfa_cee_notify’ [-Wmissing-prototypes] 796 | bfa_cee_notify(void *arg, enum bfa_ioc_event_e event) | ^~~~~~~~~~~~~~ Link: https://lore.kernel.org/r/20200723122446.1329773-8-lee.jones@linaro.org Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: ufs: ufs-exynos: Demote seemingly unintentional kerneldoc headerLee Jones
This is the only use of kerneldoc in the source file and no descriptions are provided. Fixes the following W=1 kernel build warning(s): In file included from drivers/scsi/ufs/ufs-exynos.c:23: drivers/scsi/ufs/ufs-exynos.c:234: warning: Function parameter or member 'ufs' not described in 'exynos_ufs_auto_ctrl_hcc' drivers/scsi/ufs/ufs-exynos.c:234: warning: Function parameter or member 'en' not described in 'exynos_ufs_auto_ctrl_hcc' Link: https://lore.kernel.org/r/20200723122446.1329773-7-lee.jones@linaro.org Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Seungwon Jeon <essuuj@gmail.com> Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: bnx2i: Fix parameter misnaming in function headerLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/bnx2i/bnx2i_init.c:83: warning: Function parameter or member 'dev' not described in 'bnx2i_identify_device' drivers/scsi/bnx2i/bnx2i_init.c:83: warning: Excess function parameter 'cnic' description in 'bnx2i_identify_device' Link: https://lore.kernel.org/r/20200723122446.1329773-5-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Cc: Anil Veerabhadrappa <anilgv@broadcom.com> Cc: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-30 12:40:33 +0000