summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-07-09iwlwifi: correct descriptions of advanced ucode errorsJay Sternberg
ucode errors were redefined in new ucode images and all new errors were showing as advanced sysasserts which was misleading. new errors are not sequential so additional lookup table added. errors do not overlap so both are used to support older and newer ucode images. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-09iwlwifi: enable 6050 series Gen2 devicesShanyu Zhao
To enable 6050 series Gen 2 devices: 1) new PCI_IDs are added; 2) new EEPROM version and calibration version numbers defined; 3) new hardware REV number defined; Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-09usb/atm/ueagle-atm.c: call atm_dev_signal_change() when signal changes.Karl Hiramoto
Propagate signal changes to upper atm layer. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09usb/atm/speedtch.c: call atm_dev_signal_change() when signal changes.Karl Hiramoto
Propagate signal changes to upper atm layer. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09usb/atm/cxacru.c: call atm_dev_signal_change() when signal changes.Karl Hiramoto
Propagate signal changes to upper atm layer. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09atm/suni.c: call atm_dev_signal_change() when signal changes.Karl Hiramoto
Propagate changes to upper atm layer. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09atm/solos-pci: call atm_dev_signal_change() when signal changes.Karl Hiramoto
Propagate changes to upper atm layer, so userspace netmontor knows when DSL showtime reached. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09atm/idt77105.c: call atm_dev_signal_change() when signal changes.Karl Hiramoto
Propagate changes to upper atm layer. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09atm/adummy: add syfs DEVICE_ATTR to change signalKarl Hiramoto
Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09atm/br2684: register notifier event for carrier signal changes.Karl Hiramoto
When a signal change event occurs call netif_carrier_on/off. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09atm: propagate signal changes via notifierKarl Hiramoto
Add notifier chain for changes in atm_dev. Clients like br2684 will call register_atmdevice_notifier() to be notified of changes. Drivers will call atm_dev_signal_change() to notify clients like br2684 of the change. On DSL and ATM devices it's usefull to have a know if you have a carrier signal. netdevice LOWER_UP changes can be propagated to userspace via netlink monitor. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08cxgb4vf: Implement "Unhandled Interrupts" statisticCasey Leedom
Implement "Unhandled Interrupts" statistic so we can detect when the hardware tells us that it things we have work to do but we don't find anything ... Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08fec_mpc52xx: fix error pathKulikov Vasiliy
Error path in mpc52xx_fec_probe() is broken. We must free everything that we've allocated. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08ll_temac: fix memory leakKulikov Vasiliy
If of_iomap() or irq_of_parse_and_map() fail then np must be freed. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08ax88796: free irq on errorKulikov Vasiliy
If ax_ei_open() failed we must free previously requested irq. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08ks8842: Remove unnecessary bank select.Richard Röjfors
This patch removes an unnecessary bank select before resetting the controller. Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08ks8842: Do the TX timeout work in workqueue context.Richard Röjfors
Currently all code that needs to be run at TX timeout is done in the calling context, where bottom halves are disabled. Some of the code blocks, so it needs to be done in a different context. This patch adds in a work struct which is scheduled at TX timeout. Then the timeout code is executed within work queue context. Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08ll_temac: fix DMA resources leakDenis Kirjanov
V2: Check pointers before releasing resources. Fix DMA resources leak. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
2010-07-08sfc: Remove unused field left from mis-mergeBen Hutchings
Commit eedc765ca4b19a41cf0b921a492ac08d640060d1 merged changes from net-2.6 that added and then removed efx_nic::port_num, which was also added in net-next-2.6. The end result should be that it is removed, since it is now unused. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08tg3: allow TSO on vlan devicesEric Dumazet
Similar to commit 72dccb01e8632aa (bnx2: Update vlan_features) In order to enable TSO on vlan devices, tg3 needs to update dev->vlan_features. Tested on HP NC326m (aka BCM5715S (rev a3)) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08tg3: 64 bit stats on all archesEric Dumazet
Now core network is able to handle 64 bit netdevice stats on 32 bit arches, we can provide them for tg3, since hardware maintains 64 bit counters. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08bnx2: 64 bit stats on all archesEric Dumazet
Now core network is able to handle 64 bit netdevice stats on 32 bit arches, we can provide them for bnx2, since hardware maintains some 64 bit counters. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08cxgb3: simplify need_skb_unmapFUJITA Tomonori
We can use CONFIG_NEED_DMA_MAP_STATE to see if a platform does real DMA unmapping. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08cxgb4vf: remove obsolete DECLARE_PCI_UNMAP_ADDR usageFUJITA Tomonori
We could use DEFINE_DMA_UNMAP_ADDR instead but using CONFIG_NEED_DMA_MAP_STATE is a simpler way to see if a platform does real DMA unmapping. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08vlan: allow TSO setting on vlan interfacesEric Dumazet
When we need to shape traffic using low speeds, we need to disable tso on network interface : ethtool -K eth0.2240 tso off It seems vlan interfaces miss the set_tso() ethtool method. Before enabling TSO, we must check real device supports TSO for VLAN-tagged packets and enables TSO. Note that a TSO change on real device propagates TSO setting on all vlans, even if admin selected a different TSO setting. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08Phonet: fix skb leak in pipe endpoint accept()Rémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08gre: propagate ipv6 transport classStephen Hemminger
This patch makes IPV6 over IPv4 GRE tunnel propagate the transport class field from the underlying IPV6 header to the IPV4 Type Of Service field. Without the patch, all IPV6 packets in tunnel look the same to QoS. This assumes that IPV6 transport class is exactly the same as IPv4 TOS. Not sure if that is always the case? Maybe need to mask off some bits. The mask and shift to get tclass is copied from ipv6/datagram.c Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08Bluetooth: Update sec_level/auth_type for already existing connectionsVille Tervo
Update auth level for already existing connections if it is lower than required by new connection. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Reviewed-by: Emeltchenko Andrei <andrei.emeltchenko@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-08Bluetooth: Reset the security level after an authentication failureJohan Hedberg
When authentication fails for a connection the assumed security level should be set back to BT_SECURITY_LOW so that subsequent connect attempts over the same link don't falsely assume that security is adequate enough. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-08Bluetooth: Check L2CAP pending status before sending connect requestAndrei Emeltchenko
Due to race condition in L2CAP state machine L2CAP Connection Request may be sent twice for SDP with the same source channel id. Problems reported connecting to Apple products, some carkit, Blackberry phones. ... 2010-06-07 21:18:03.651031 < ACL data: handle 1 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 1 scid 0x0040 2010-06-07 21:18:03.653473 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2010-06-07 21:18:03.653808 > HCI Event: Auth Complete (0x06) plen 3 status 0x00 handle 1 2010-06-07 21:18:03.653869 < ACL data: handle 1 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 1 scid 0x0040 ... Patch uses L2CAP_CONF_CONNECT_PEND flag to mark that L2CAP Connection Request has been sent already. Modified version of patch from Ville Tervo. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-08wl1271: use per-channel max tx power passed by mac80211 when scanningLuciano Coelho
We were always using the max transmit power when scanning. Now we use the values passed to the driver by the mac80211 stack, so that we comply with regulations. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Saravanan Dhanabal <ext-saravanan.dhanabal@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-08wl1271: rewritten scanning codeLuciano Coelho
This patch is a complete rewrite of the scanning code. It now includes a state machine to scan all four possible sets of channels independently: 2.4GHz active, 2.4GHz passive, 5GHz active and 5GHz passive. The wl1271 firmware doesn't allow these sets to be mixed, so up to several scan commands have to be issued. This patch also allows scanning more than 24 channels per set, by breaking the sets into smaller parts if needed (the firmware can scan a maximum of 24 channels at a time). Previously, the scanning code was erroneously scanning all channels possible actively, not complying with the CRDA values. This is also fixed with this patch. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Saravanan Dhanabal <ext-saravanan.dhanabal@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-08wl1271: moved scan operations to a separate fileLuciano Coelho
The scanning code is going to get a bit more complex, with proper support for active/passive scans together with 2.4GHz and 5GHz. In the future, also a new type of scan (periodic scan) will be added. When all this is implemented, the code is going to be much more complex, so we'd better separate it into a separate file. This patch doesn't have any impact on functionality. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Saravanan Dhanabal <ext-saravanan.dhanabal@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-08wl1271: Update interface to temporarily disable dynamic PSJuuso Oikarinen
The mac80211 interface to temporarily disable dynamic PS changed, make corresponding changes to the driver. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Saravanan Dhanabal <ext-saravanan.dhanabal@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-08wl1271: Fix warning when disconnecting and ad-hoc networkJuuso Oikarinen
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-08wl1271: Disable dynamic PS based on BT co-ext sense eventsJuuso Oikarinen
This patch requests mac80211 to disable dynamic PSM based on sense events coming from the firmware. Effectively, whenever there is bluetooth traffic, the mac80211 is forced into full PSM mode. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-08wl1271: Update hardware ARP filtering configuration handlingJuuso Oikarinen
The interface for hardware ARP configuration changed in the mac80211. Change driver accordingly. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-08wl1271: read fem manufacturer value from nvsLuciano Coelho
We should read the fem manufacturer value from the NVS, so we can modify it easily and use a consistent value throughout the configuration. Previously we had to set the FEM value in the NVS and in the driver's initialization parameters. This patch removes the latter. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-08wl1271: Work around AP's with broken ps-poll functionalityJuuso Oikarinen
Some AP's (such as Zyxel Prestige 600) have totally broken ps-poll functionality. When powersave is enabled, these AP's will set the TIM bit for a STA in beacons, but when the STA responds with a ps-poll, the AP does not respond with data. The wl1271 firmware is able to send an indication to the host, when this problem occurs. This patch adds implementation, which temporarily disables power-save in response to this indication, allowing the AP to transmit whatever data it has buffered for the STA / whatever data is inbound at that time. This patch does not make these AP's work reliably in PSM, but improves the chances of inbound data getting through. The side effect of this patch is increased power consumption when using a faulty AP. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-08wl1271: Use all basic rates for ps-poll, instead of just the slowestJuuso Oikarinen
This improves ps-poll handling in WLAN PSM. It also improves performance, including WLAN-BT co-existence reliability. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-08wl1271: Use the ARP configuration function from mac80211Juuso Oikarinen
This patch updates the driver to use the ARP configuration function from the mac80211. Also, clean up IPv6 support from the ACX function as ARP is not used with that protocol version. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-08wl1271: Add TSF handlingJuuso Oikarinen
Add functionality to pass the current TSF (mac time) to the mac80211. This is needed for ad-hoc merging. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-08wl1271: Remove calibration from join commandJuuso Oikarinen
This patch removes the calibration performed on the first join command. The reasoning is that this is unnecessary as devices get their calibration data via the NVS file, and because the commands break BT coexistence. This is actually safe, because of the implementation the calibration was executed on the first JOIN anyway, after an ifdown/ifup the devices have relied on the NVS for calibration anyway (== most of the time.) Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-08mac80211: remove wep dependencyJohn W. Linville
The current mac80211 code assumes that WEP is always available. If WEP fails to initialize, ieee80211_register_hw will always fail. In some cases (e.g. FIPS certification), the cryptography used by WEP is unavailable. However, in such cases there is no good reason why CCMP encryption (or even no link level encryption) cannot be used. So, this patch removes mac80211's assumption that WEP (and TKIP) will always be available for use. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-07cxgb4: fix for new ndo_get_stats64 signatureDimitris Michailidis
The change to ndo_get_stats64 in "net: fix 64 bit counters on 32 bit arches" missed cxgb4. Fix it. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07b44: remove unused dma_desc_align_maskFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07ethoc: Fix warning in ethoc_init_ring().David S. Miller
Get rid of the pointless back-and-forth casting of dev->mem_start from long to pointer back to long again. Also fixes a warning reported by Stephen Rothwell: drivers/net/ethoc.c: In function 'ethoc_init_ring': drivers/net/ethoc.c:302: warning: assignment makes integer from pointer without a cast Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07niu: BUG on inability to find page in rx page hashes.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07cxgb4: Use kfree_skb for skb pointersDenis Kirjanov
Use kfree_skb for skb pointers Acked-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07isdn/gigaset: remove EXPERIMENTAL tag from GIGASET_CAPITilman Schmidt
The CAPI variant of the Gigaset drivers can, in combination with capidrv, now fully replace the legacy ISDN4Linux variant. All reported problems have been fixed. So remove the EXPERIMENTAL tag from the Kconfig option selecting it, and adapt the documentation accordingly to encourage users to switch to it. Impact: documentation/status update, no functional change Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-21 03:48:05 +0000