| Age | Commit message (Collapse) | Author |
|---|
|
When receiving data in cyclic mode from PDMA peripherals, where reload
count is set to infinite, any TR in the set can potentially be the last
one of the overall transfer. In such cases, the EOP flag needs to be set
in each TR and PDMA's Static TR "Z" parameter should be set, matching
the size of the TR.
This is required for the teardown to function properly and cleanup the
internal state memory. This only affects platforms using BCDMA and not
those using UDMA-P, which could set EOP flag in the teardown TR
automatically.
Similarly when transmitting data in cyclic mode to PDMA peripherals, the
EOP flag needs to be set to get the teardown completion signal
correctly.
Fixes: 017794739702 ("dmaengine: ti: k3-udma: Initial support for K3 BCDMA")
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Verdin AM62
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Jai Luthra <jai.luthra@linux.dev>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240930-z_cnt-v2-1-9d38aba149a2@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Configs like the ones coming from the MMC subsystem will have either
'src' or 'dst' zeroed, resulting in an unknown bus width. This will bail
out on the RZ DMA driver because of the sanity check for a valid bus
width. Reorder the code, so that the check will only be applied when the
corresponding address is non-zero.
Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20241007110200.43166-6-wsa+renesas@sang-engineering.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The current panel brightness is only 360 nit. Adjust the power and gamma to
optimize the panel brightness. The brightness after adjustment is 390 nit.
Fixes: 3179338750d8 ("drm/panel: himax-hx83102: Support for IVO t109nw41 MIPI-DSI panel")
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241011020819.1254157-1-yangcong5@huaqin.corp-partner.google.com
|
|
As POE support was recently added, update the documentation.
Also note that kernel threads have a default protection key register value.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241001133618.1547996-3-joey.gouly@arm.com
[will: Adjusted wording based on feedback from Kevin]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Restrict kernel threads to only have RWX overlays for pkey 0. This matches
what arch/x86 does, by defaulting to a restrictive PKRU.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Kevin Brodsky <Kevin.Brodsky@arm.com>
Link: https://lore.kernel.org/r/20241001133618.1547996-2-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Andrew has been a pillar of the community for as long as I remember.
Focusing on embedded networking, co-maintaining Ethernet PHYs and
DSA code, but also actively reviewing MAC and integrated NIC drivers.
Elevate Andrew to the status of co-maintainer of all netdev drivers.
Acked-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20241011193303.2461769-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 7b815817aa58 ("blk-mq: add helper for checking if one CPU is mapped to specified hctx")
needs to check queue mapping via tag set in hctx's cpuhp handler.
However, q->tag_set may not be setup yet when the cpuhp handler is
enabled, then kernel oops is triggered.
Fix the issue by setup queue tag_set before initializing hctx.
Cc: stable@vger.kernel.org
Reported-and-tested-by: Rick Koch <mr.rickkoch@gmail.com>
Closes: https://lore.kernel.org/linux-block/CANa58eeNDozLaBHKPLxSAhEy__FPfJT_F71W=sEQw49UCrC9PQ@mail.gmail.com
Fixes: 7b815817aa58 ("blk-mq: add helper for checking if one CPU is mapped to specified hctx")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241014005115.2699642-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve consistency of previous limitations' subsection titles, and
expand a bit the IOCTL section.
This changes some HTML anchors and may break some external links though.
Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Cc: Tahera Fahimi <fahimitahera@gmail.com>
Reviewed-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20241004153122.501775-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Let's define the "scheduling context" as all the scheduler state
in task_struct for the task chosen to run, which we'll call the
donor task, and the "execution context" as all state required to
actually run the task.
Currently both are intertwined in task_struct. We want to
logically split these such that we can use the scheduling
context of the donor task selected to be scheduled, but use
the execution context of a different task to actually be run.
To this purpose, introduce rq->donor field to point to the
task_struct chosen from the runqueue by the scheduler, and will
be used for scheduler state, and preserve rq->curr to indicate
the execution context of the task that will actually be run.
This patch introduces the donor field as a union with curr, so it
doesn't cause the contexts to be split yet, but adds the logic to
handle everything separately.
[add additional comments and update more sched_class code to use
rq::proxy]
[jstultz: Rebased and resolved minor collisions, reworked to use
accessors, tweaked update_curr_common to use rq_proxy fixing rt
scheduling issues]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Metin Kaya <metin.kaya@arm.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Metin Kaya <metin.kaya@arm.com>
Link: https://lore.kernel.org/r/20241009235352.1614323-8-jstultz@google.com
|
|
As we're going to re-use the deactivation logic,
split it into a helper.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Metin Kaya <metin.kaya@arm.com>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Metin Kaya <metin.kaya@arm.com>
Link: https://lore.kernel.org/r/20241009235352.1614323-7-jstultz@google.com
|
|
This patch consolidates rt and deadline pick_*_task functions to
a task_is_pushable() helper
This patch was broken out from a larger chain migration
patch originally by Connor O'Brien.
[jstultz: split out from larger chain migration patch,
renamed helper function]
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Metin Kaya <metin.kaya@arm.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Metin Kaya <metin.kaya@arm.com>
Link: https://lore.kernel.org/r/20241009235352.1614323-6-jstultz@google.com
|
|
Switch logic that deactivates, sets the task cpu,
and reactivates a task on a different rq to use a
helper that will be later extended to push entire
blocked task chains.
This patch was broken out from a larger chain migration
patch originally by Connor O'Brien.
[jstultz: split out from larger chain migration patch]
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Metin Kaya <metin.kaya@arm.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Metin Kaya <metin.kaya@arm.com>
Link: https://lore.kernel.org/r/20241009235352.1614323-5-jstultz@google.com
|
|
Implementing proxy execution requires that scheduler code be able to
identify the current owner of a mutex. Expose __mutex_owner() for
this purpose (alone!). Includes a null mutex check, so that users
of the function can be simplified.
[Removed the EXPORT_SYMBOL]
[jstultz: Reworked per Peter's suggestions]
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Metin Kaya <metin.kaya@arm.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Metin Kaya <metin.kaya@arm.com>
Link: https://lore.kernel.org/r/20241009235352.1614323-4-jstultz@google.com
|
|
With the proxy-execution series, we traverse the task->mutex->task
blocked_on/owner chain in the scheduler core. We do this while holding
the rq::lock to keep the structures in place while taking and
releasing the alternating lock types.
Since the mutex::wait_lock is one of the locks we will take in this
way under the rq::lock in the scheduler core, we need to make sure
that its usage elsewhere is irq safe.
[rebase & fix {un,}lock_wait_lock helpers in ww_mutex.h]
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Metin Kaya <metin.kaya@arm.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Metin Kaya <metin.kaya@arm.com>
Link: https://lore.kernel.org/r/20241009235352.1614323-3-jstultz@google.com
|
|
In preparation to nest mutex::wait_lock under rq::lock we need
to remove wakeups from under it.
Do this by utilizing wake_qs to defer the wakeup until after the
lock is dropped.
[Heavily changed after 55f036ca7e74 ("locking: WW mutex cleanup") and
08295b3b5bee ("locking: Implement an algorithm choice for Wound-Wait
mutexes")]
[jstultz: rebased to mainline, added extra wake_up_q & init
to avoid hangs, similar to Connor's rework of this patch]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Metin Kaya <metin.kaya@arm.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Metin Kaya <metin.kaya@arm.com>
Link: https://lore.kernel.org/r/20241009235352.1614323-2-jstultz@google.com
|
|
commit 223baf9d17f25 ("sched: Fix performance regression introduced by mm_cid")
introduced a per-mm/cpu current concurrency id (mm_cid), which keeps
a reference to the concurrency id allocated for each CPU. This reference
expires shortly after a 100ms delay.
These per-CPU references keep the per-mm-cid data cache-local in
situations where threads are running at least once on each CPU within
each 100ms window, thus keeping the per-cpu reference alive.
However, intermittent workloads behaving in bursts spaced by more than
100ms on each CPU exhibit bad cache locality and degraded performance
compared to purely per-cpu data indexing, because concurrency IDs are
allocated over various CPUs and cores, therefore losing cache locality
of the associated data.
Introduce the following changes to improve per-mm-cid cache locality:
- Add a "recent_cid" field to the per-mm/cpu mm_cid structure to keep
track of which mm_cid value was last used, and use it as a hint to
attempt re-allocating the same concurrency ID the next time this
mm/cpu needs to allocate a concurrency ID,
- Add a per-mm CPUs allowed mask, which keeps track of the union of
CPUs allowed for all threads belonging to this mm. This cpumask is
only set during the lifetime of the mm, never cleared, so it
represents the union of all the CPUs allowed since the beginning of
the mm lifetime (note that the mm_cpumask() is really arch-specific
and tailored to the TLB flush needs, and is thus _not_ a viable
approach for this),
- Add a per-mm nr_cpus_allowed to keep track of the weight of the
per-mm CPUs allowed mask (for fast access),
- Add a per-mm max_nr_cid to keep track of the highest number of
concurrency IDs allocated for the mm. This is used for expanding the
concurrency ID allocation within the upper bound defined by:
min(mm->nr_cpus_allowed, mm->mm_users)
When the next unused CID value reaches this threshold, stop trying
to expand the cid allocation and use the first available cid value
instead.
Spreading allocation to use all the cid values within the range
[ 0, min(mm->nr_cpus_allowed, mm->mm_users) - 1 ]
improves cache locality while preserving mm_cid compactness within the
expected user limits,
- In __mm_cid_try_get, only return cid values within the range
[ 0, mm->nr_cpus_allowed ] rather than [ 0, nr_cpu_ids ]. This
prevents allocating cids above the number of allowed cpus in
rare scenarios where cid allocation races with a concurrent
remote-clear of the per-mm/cpu cid. This improvement is made
possible by the addition of the per-mm CPUs allowed mask,
- In sched_mm_cid_migrate_to, use mm->nr_cpus_allowed rather than
t->nr_cpus_allowed. This criterion was really meant to compare
the number of mm->mm_users to the number of CPUs allowed for the
entire mm. Therefore, the prior comparison worked fine when all
threads shared the same CPUs allowed mask, but not so much in
scenarios where those threads have different masks (e.g. each
thread pinned to a single CPU). This improvement is made
possible by the addition of the per-mm CPUs allowed mask.
* Benchmarks
Each thread increments 16kB worth of 8-bit integers in bursts, with
a configurable delay between each thread's execution. Each thread run
one after the other (no threads run concurrently). The order of
thread execution in the sequence is random. The thread execution
sequence begins again after all threads have executed. The 16kB areas
are allocated with rseq_mempool and indexed by either cpu_id, mm_cid
(not cache-local), or cache-local mm_cid. Each thread is pinned to its
own core.
Testing configurations:
8-core/1-L3: Use 8 cores within a single L3
24-core/24-L3: Use 24 cores, 1 core per L3
192-core/24-L3: Use 192 cores (all cores in the system)
384-thread/24-L3: Use 384 HW threads (all HW threads in the system)
Intermittent workload delays between threads: 200ms, 10ms.
Hardware:
CPU(s): 384
On-line CPU(s) list: 0-383
Vendor ID: AuthenticAMD
Model name: AMD EPYC 9654 96-Core Processor
Thread(s) per core: 2
Core(s) per socket: 96
Socket(s): 2
Caches (sum of all):
L1d: 6 MiB (192 instances)
L1i: 6 MiB (192 instances)
L2: 192 MiB (192 instances)
L3: 768 MiB (24 instances)
Each result is an average of 5 test runs. The cache-local speedup
is calculated as: (cache-local mm_cid) / (mm_cid).
Intermittent workload delay: 200ms
per-cpu mm_cid cache-local mm_cid cache-local speedup
(ns) (ns) (ns)
8-core/1-L3 1374 19289 1336 14.4x
24-core/24-L3 2423 26721 1594 16.7x
192-core/24-L3 2291 15826 2153 7.3x
384-thread/24-L3 1874 13234 1907 6.9x
Intermittent workload delay: 10ms
per-cpu mm_cid cache-local mm_cid cache-local speedup
(ns) (ns) (ns)
8-core/1-L3 662 756 686 1.1x
24-core/24-L3 1378 3648 1035 3.5x
192-core/24-L3 1439 10833 1482 7.3x
384-thread/24-L3 1503 10570 1556 6.8x
[ This deprecates the prior "sched: NUMA-aware per-memory-map concurrency IDs"
patch series with a simpler and more general approach. ]
[ This patch applies on top of v6.12-rc1. ]
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/lkml/20240823185946.418340-1-mathieu.desnoyers@efficios.com/
|
|
The memory barrier rmb() in generic idle loop do_idle() function is not
needed, it doesn't order any load instruction, just remove it as needless
rmb() can cause performance impact.
The rmb() was introduced by the tglx/history.git commit f2f1b44c75c4
("[PATCH] Remove RCU abuse in cpu_idle()") to order the loads between
cpu_idle_map and pm_idle. It pairs with wmb() in function cpu_idle_wait().
And then with the removal of cpu_idle_state in function cpu_idle() and
wmb() in function cpu_idle_wait() in commit 783e391b7b5b ("x86: Simplify
cpu_idle_wait"), rmb() no longer has a reason to exist.
After that, commit d16699123434 ("idle: Implement generic idle function")
implemented a generic idle function cpu_idle_loop() which resembles the
functionality found in arch/. And it retained the rmb() in generic idle
loop in file kernel/cpu/idle.c.
And at last, commit cf37b6b48428 ("sched/idle: Move cpu/idle.c to
sched/idle.c") moved cpu/idle.c to sched/idle.c. And commit c1de45ca831a
("sched/idle: Add support for tasks that inject idle") renamed function
cpu_idle_loop() to do_idle().
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241009093745.9504-1-quic_zhonhan@quicinc.com
|
|
Sync with sched/urgent to avoid conflicts.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
Add new vendor_id and subsystem_id in quirk for Lenovo, ASUS,
and Dell projects.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20241011074040.524-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
sysfs warns if we're removing a symlink from a directory that's no
longer in sysfs; this is triggered by fstests generic/730, which
simulates hot removal of a block device.
This patch is however not a correct fix, since checking
kobj->state_in_sysfs on a kobj owned by another subsystem is racy.
A better fix would be to add the appropriate check to
sysfs_remove_link() - and sysfs_create_link() as well.
But kobject_add_internal()/kobject_del() do not as of today have locking
that would support that.
Note that the block/holder.c code appears to be subject to this race as
well.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
To help Claudiu and offload the work, add myself to the maintainer list for
those drivers.
Acked-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://patch.msgid.link/20241014092830.46709-1-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sean noted that ever since commit 152e11f6df29 ("sched/fair: Implement
delayed dequeue") KVM's preemption notifiers have started
mis-classifying preemption vs blocking.
Notably p->on_rq is no longer sufficient to determine if a task is
runnable or blocked -- the aforementioned commit introduces tasks that
remain on the runqueue even through they will not run again, and
should be considered blocked for many cases.
Add the task_is_runnable() helper to classify things and audit all
external users of the p->on_rq state. Also add a few comments.
Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue")
Reported-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20241010091843.GK33184@noisy.programming.kicks-ass.net
|
|
Since sched_delayed tasks remain queued even after blocking, the load
balancer can migrate them between runqueues while PSI considers them
to be asleep. As a result, it misreads the migration requeue followed
by a wakeup as a double queue:
psi: inconsistent task state! task=... cpu=... psi_flags=4 clear=. set=4
First, call psi_enqueue() after p->sched_class->enqueue_task(). A
wakeup will clear p->se.sched_delayed while a migration will not, so
psi can use that flag to tell them apart.
Then teach psi to migrate any "sleep" state when delayed-dequeue tasks
are being migrated.
Delayed-dequeue tasks can be revived by ttwu_runnable(), which will
call down with a new ENQUEUE_DELAYED. Instead of further complicating
the wakeup conditional in enqueue_task(), identify migration contexts
instead and default to wakeup handling for all other cases.
It's not just the warning in dmesg, the task state corruption causes a
permanent CPU pressure indication, which messes with workload/machine
health monitoring.
Debugged-by-and-original-fix-by: K Prateek Nayak <kprateek.nayak@amd.com>
Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue")
Closes: https://lore.kernel.org/lkml/20240830123458.3557-1-spasswolf@web.de/
Closes: https://lore.kernel.org/all/cd67fbcd-d659-4822-bb90-7e8fbb40a856@molgen.mpg.de/
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20241010193712.GC181795@cmpxchg.org
|
|
When creating a new stripe, we may reuse an existing stripe that has
some empty and some nonempty blocks.
Generally, the existing stripe won't change underneath us - except for
block sector counts, which we copy to the new key in
ec_stripe_key_update.
But the device removal path can now invalidate stripe pointers to a
device, and that can race with stripe reuse.
Change ec_stripe_key_update() to check for and resolve this
inconsistency.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Update for BCH_SB_MEMBER_INVALID.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fix for memory corruption regression in amd_sfh driver (Basavaraj
Natikar)
- fix for mis-reporting of BTN_TOOL_PEN and BTN_TOOL_RUBBER for AES
sensors tools in Wacom driver (Jason Gerecke)
- fix for unitialized variable use in intel-ish-hid driver
(SurajSonawane2415)
- a few device-specific quirks / device ID additions
* tag 'hid-for-linus-2024101301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: wacom: Hardcode (non-inverted) AES pens as BTN_TOOL_PEN
HID: amd_sfh: Switch to device-managed dmam_alloc_coherent()
HID: multitouch: Add quirk for HONOR MagicBook Art 14 touchpad
HID: multitouch: Add support for B2402FVA track point
HID: plantronics: Workaround for an unexcepted opposite volume key
hid: intel-ish-hid: Fix uninitialized variable 'rv' in ish_fw_xfer_direct_dma
|
|
Reported-by: syzbot+f8c98a50c323635be65d@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We were checking that the alloc key was for a valid device, but not a
valid bucket.
This is the upgrade path from versions prior to bcachefs being mainlined.
Reported-by: syzbot+a1b59c8e1a3f022fd301@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reported-by: syzbot+19ad84d5133871207377@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
|
|
The HAVE_CFI_ICALL_NORMALIZE_INTEGERS option has some tricky conditions
when KASAN or GCOV are turned on, as in that case we need some clang and
rustc fixes [1][2] to avoid boot failures. The intent with the current
setup is that you should be able to override the check and turn on the
option if your clang/rustc has the fix. However, this override does not
work in practice. Thus, use the new RUSTC_LLVM_VERSION to correctly
implement the check for whether the fix is available.
Additionally, remove KASAN_HW_TAGS from the list of incompatible
options. The CFI_ICALL_NORMALIZE_INTEGERS option is incompatible with
KASAN because LLVM will emit some constructors when using KASAN that are
assigned incorrect CFI tags. These constructors are emitted due to use
of -fsanitize=kernel-address or -fsanitize=kernel-hwaddress that are
respectively passed when KASAN_GENERIC or KASAN_SW_TAGS are enabled.
However, the KASAN_HW_TAGS option relies on hardware support for MTE
instead and does not pass either flag. (Note also that KASAN_HW_TAGS
does not `select CONSTRUCTORS`.)
Link: https://github.com/llvm/llvm-project/pull/104826 [1]
Link: https://github.com/rust-lang/rust/pull/129373 [2]
Fixes: 4c66f8307ac0 ("cfi: encode cfi normalized integers + kasan/gcov bug in Kconfig")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20241010-icall-detect-vers-v1-2-8f114956aa88@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Each version of Rust supports a range of LLVM versions. There are cases where
we want to gate a config on the LLVM version instead of the Rust version.
Normalized cfi integer tags are one example [1].
The invocation of rustc-version is being moved from init/Kconfig to
scripts/Kconfig.include for consistency with cc-version.
Link: https://lore.kernel.org/all/20240925-cfi-norm-kasan-fix-v1-1-0328985cdf33@google.com/ [1]
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20241011114040.3900487-1-gary@garyguo.net
[ Added missing `-llvm` to the Usage documentation. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Pull smb client fixes from Steve French:
"Two fixes for Windows symlink handling"
* tag '6.12-rc2-cifs-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix creating native symlinks pointing to current or parent directory
cifs: Improve creating native symlinks pointing to directory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for some reported problems for 6.12-rc3.
Include in here is:
- fix for yurex driver that was caused in -rc1
- build error fix for usbg network filesystem code
- onboard_usb_dev build fix
- dwc3 driver fixes for reported errors
- gadget driver fix
- new USB storage driver quirk
- xhci resume bugfix
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
net/9p/usbg: Fix build error
USB: yurex: kill needless initialization in yurex_read
Revert "usb: yurex: Replace snprintf() with the safer scnprintf() variant"
usb: xhci: Fix problem with xhci resume from suspend
usb: misc: onboard_usb_dev: introduce new config symbol for usb5744 SMBus support
usb: dwc3: core: Stop processing of pending events if controller is halted
usb: dwc3: re-enable runtime PM after failed resume
usb: storage: ignore bogus device raised by JieLi BR21 USB sound chip
usb: gadget: core: force synchronous registration
|
|
By using NVMEM_DEVID_AUTO we support more than 1 device and
automatically enumerate.
Fixes: 0969001569e4 ("misc: microchip: pci1xxxx: Add support to read and write into PCI1XXXX OTP via NVMEM sysfs")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20241007071120.9522-2-heiko.thiery@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
By using NVMEM_DEVID_AUTO we support more than 1 device and
automatically enumerate.
Fixes: 9ab5465349c0 ("misc: microchip: pci1xxxx: Add support to read and write into PCI1XXXX EEPROM via NVMEM sysfs")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20241007071120.9522-1-heiko.thiery@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The recent fix for array out-of-bounds accesses replaced sprintf()
calls blindly with snprintf(). However, since snprintf() returns the
would-be-printed size, not the actually output size, the length
calculation can still go over the given limit.
Use scnprintf() instead of snprintf(), which returns the actually
output letters, for addressing the potential out-of-bounds access
properly.
Fixes: ab11dac93d2d ("dev/parport: fix the array out-of-bounds risk")
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240920103318.19271-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here is a single driver core fix, and a .mailmap update.
The fix is for the rust driver core bindings, turned out that the
from_raw binding wasn't a good idea (don't want to pass a pointer to a
reference counted object without actually incrementing the pointer.)
So this change fixes it up as the from_raw binding came in in -rc1.
The other change is a .mailmap update.
Both have been in linux-next for a while with no reported issues"
* tag 'driver-core-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
mailmap: update mail for Fiona Behrens
rust: device: change the from_raw() function
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for the 6.12 cycle.
Most of this pull request is the result of Javier Carrasco doing a
careful audit for missing Kconfig dependencies that luck has meant
the random builds have never hit. The rest is the usual mix of old
bugs that have surfaced and some fallout from the recent merge window.
adi,ad5686
- Fix binding duplication of compatible strings.
bosch,bma400
- Fix an uninitialized variable in the event tap handling.
bosch,bmi323
- Fix several issues in the register saving and restore on suspend/resume
sensiron,spd500
- Fix missing CRC8 dependency
ti,op3001
- Fix a missing full-scale range value (values above this point were
all reported wrongly)
vishay,veml6030
- Fix a segmentation fault due to some type confusion.
- Fix wrong ambient light sensor resolution.
* tag 'iio-fixes-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (34 commits)
iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig
iio: frequency: {admv4420,adrf6780}: format Kconfig entries
iio: adc: ad4695: Add missing Kconfig select
iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency()
iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config()
iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig
iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig
iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig
iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig
iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig
iio: resolver: ad2s1210: add missing select (TRIGGERED_)BUFFER in Kconfig
iio: resolver: ad2s1210 add missing select REGMAP in Kconfig
iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: pressure: bm1390: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: magnetometer: af8133j: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: light: bu27008: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: chemical: ens160: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: dac: ad5766: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: dac: ad3552r: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix crash in memcpy on 8xx due to dcbz workaround since recent
changes
Thanks to Christophe Leroy.
* tag 'powerpc-6.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/8xx: Fix kernel DTLB miss on dcbz
|
|
Only for_each_sgtable_dma_sg() should be used to walk through a SG table
to grab correct bus address and length pair after calling DMA MAP API on
a SG table as DMA MAP APIs updates the SG table and for_each_sgtable_sg()
walks through the original SG table.
Fixes: ff13be830333 ("accel/qaic: Add datapath")
Fixes: 129776ac2e38 ("accel/qaic: Add control path")
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193252.3888544-1-quic_jhugo@quicinc.com
|
|
The current implementation only calls chained_irq_enter() and
chained_irq_exit() if it detects pending interrupts.
```
for (i = 0; i < info->stride; i++) {
uregmap_read(info->map, id_reg + 4 * i, ®);
if (!reg)
continue;
chained_irq_enter(parent_chip, desc);
```
However, in case of GPIO pin configured in level mode and the parent
controller configured in edge mode, GPIO interrupt might be lowered by the
hardware. In the result, if the interrupt is short enough, the parent
interrupt is still pending while the GPIO interrupt is cleared;
chained_irq_enter() never gets called and the system hangs trying to
service the parent interrupt.
Moving chained_irq_enter() and chained_irq_exit() outside the for loop
ensures that they are called even when GPIO interrupt is lowered by the
hardware.
The similar code with chained_irq_enter() / chained_irq_exit() functions
wrapping interrupt checking loop may be found in many other drivers:
```
grep -r -A 10 chained_irq_enter drivers/pinctrl
```
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Matsievskiy <matsievskiysv@gmail.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/20241012105743.12450-2-matsievskiysv@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four small fixes, three in drivers and one in the FC transport class
to add idempotence to state setting"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_transport_fc: Allow setting rport state to current state
scsi: wd33c93: Don't use stale scsi_pointer value
scsi: fnic: Move flush_work initialization out of if block
scsi: ufs: Use pre-calculated offsets in ufshcd_init_lrb()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Add missing dependencies on REGMAP_I2C for several drivers
- Fix memory leak in adt7475 driver
- Relabel Columbiaville temperature sensor in intel-m10-bmc-hwmon
driver to match other sensor labels
* tag 'hwmon-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (max1668) Add missing dependency on REGMAP_I2C
hwmon: (ltc2991) Add missing dependency on REGMAP_I2C
hwmon: (adt7470) Add missing dependency on REGMAP_I2C
hwmon: (adm9240) Add missing dependency on REGMAP_I2C
hwmon: (mc34vr500) Add missing dependency on REGMAP_I2C
hwmon: (tmp513) Add missing dependency on REGMAP_I2C
hwmon: (adt7475) Fix memory leak in adt7475_fan_pwm_config()
hwmon: intel-m10-bmc-hwmon: relabel Columbiaville to CVL Die Temperature
|
|
Since adding the PCI power control code, we may end up with a race between
the pwrctl platform device rescanning the bus and host controller probe
functions. The latter need to take the rescan lock when adding devices or
we may end up in an undefined state having two incompletely added devices
and hit the following crash when trying to remove the device over sysfs:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Call trace:
__pi_strlen+0x14/0x150
kernfs_find_ns+0x80/0x13c
kernfs_remove_by_name_ns+0x54/0xf0
sysfs_remove_bin_file+0x24/0x34
pci_remove_resource_files+0x3c/0x84
pci_remove_sysfs_dev_files+0x28/0x38
pci_stop_bus_device+0x8c/0xd8
pci_stop_bus_device+0x40/0xd8
pci_stop_and_remove_bus_device_locked+0x28/0x48
remove_store+0x70/0xb0
dev_attr_store+0x20/0x38
sysfs_kf_write+0x58/0x78
kernfs_fop_write_iter+0xe8/0x184
vfs_write+0x2dc/0x308
ksys_write+0x7c/0xec
Fixes: 4565d2652a37 ("PCI/pwrctl: Add PCI power control core code")
Link: https://lore.kernel.org/r/20241003084342.27501-1-brgl@bgdev.pl
Reported-by: Konrad Dybcio <konradybcio@kernel.org>
Tested-by: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
SDM845 sound card driver uses qcom_snd_sdw_startup() from the common
Soundwire module, so select it to fix build failures:
ERROR: modpost: "qcom_snd_sdw_startup" [sound/soc/qcom/snd-soc-sdm845.ko] undefined!
Fixes: d0e806b0cc62 ("ASoC: qcom: sdm845: add missing soundwire runtime stream alloc")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241012100957.129103-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Check if we have snapshot_trees or subvolumes that refer to the snapshot
node being reconstructed, and use them.
With this, the kill_btree_root test that blows away the snapshots btree
now passes, and we're able to successfully reconstruct.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes an assertion pop in nocow_locking.c
00243 kernel BUG at fs/bcachefs/nocow_locking.c:41!
00243 Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
00243 Modules linked in:
00243 Hardware name: linux,dummy-virt (DT)
00243 pstate: 60001005 (nZCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--)
00244 pc : bch2_bucket_nocow_unlock (/home/testdashboard/linux-7/fs/bcachefs/nocow_locking.c:41)
00244 lr : bkey_nocow_lock (/home/testdashboard/linux-7/fs/bcachefs/data_update.c:79)
00244 sp : ffffff80c82373b0
00244 x29: ffffff80c82373b0 x28: ffffff80e08958c0 x27: ffffff80e0880000
00244 x26: ffffff80c8237a98 x25: 00000000000000a0 x24: ffffff80c8237ab0
00244 x23: 00000000000000c0 x22: 0000000000000008 x21: 0000000000000000
00244 x20: ffffff80c8237a98 x19: 0000000000000018 x18: 0000000000000000
00244 x17: 0000000000000000 x16: 000000000000003f x15: 0000000000000000
00244 x14: 0000000000000008 x13: 0000000000000018 x12: 0000000000000000
00244 x11: 0000000000000000 x10: ffffff80e0880000 x9 : ffffffc0803ac1a4
00244 x8 : 0000000000000018 x7 : ffffff80c8237a88 x6 : ffffff80c8237ab0
00244 x5 : ffffff80e08988d0 x4 : 00000000ffffffff x3 : 0000000000000000
00244 x2 : 0000000000000004 x1 : 0003000000000d1e x0 : ffffff80e08988c0
00244 Call trace:
00244 bch2_bucket_nocow_unlock (/home/testdashboard/linux-7/fs/bcachefs/nocow_locking.c:41)
00245 bch2_data_update_init (/home/testdashboard/linux-7/fs/bcachefs/data_update.c:627 (discriminator 1))
00245 promote_alloc.isra.0 (/home/testdashboard/linux-7/fs/bcachefs/io_read.c:242 /home/testdashboard/linux-7/fs/bcachefs/io_read.c:304)
00245 __bch2_read_extent (/home/testdashboard/linux-7/fs/bcachefs/io_read.c:949)
00246 __bch2_read (/home/testdashboard/linux-7/fs/bcachefs/io_read.c:1215)
00246 bch2_direct_IO_read (/home/testdashboard/linux-7/fs/bcachefs/fs-io-direct.c:132)
00246 bch2_read_iter (/home/testdashboard/linux-7/fs/bcachefs/fs-io-direct.c:201)
00247 aio_read.constprop.0 (/home/testdashboard/linux-7/fs/aio.c:1602)
00247 io_submit_one.constprop.0 (/home/testdashboard/linux-7/fs/aio.c:2003 /home/testdashboard/linux-7/fs/aio.c:2052)
00248 __arm64_sys_io_submit (/home/testdashboard/linux-7/fs/aio.c:2111 /home/testdashboard/linux-7/fs/aio.c:2081 /home/testdashboard/linux-7/fs/aio.c:2081)
00248 invoke_syscall.constprop.0 (/home/testdashboard/linux-7/arch/arm64/include/asm/syscall.h:61 /home/testdashboard/linux-7/arch/arm64/kernel/syscall.c:54)
00248 ========= FAILED TIMEOUT tiering_variable_buckets_replicas in 1200s
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
BCH_TRANS_COMMIT_journal_reclaim without BCH_WATERMARK_reclaim means
"return an error if low on journal space" - but accounting replay must
succeed.
Fixes https://github.com/koverstreet/bcachefs/issues/656
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reported-by: syzbot+064ce437a1ad63d3f6ef@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
