| Age | Commit message (Collapse) | Author |
|---|
|
Add IPQ8074 compatible to A53 PLL bindings.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818220628.339366-4-robimarko@gmail.com
|
|
While fixing up the driver I noticed that my IPQ8074 board was hanging
after CPUFreq switched the frequency during boot, WDT would eventually
reset it.
So mark apcs_alias0_core_clk as critical since its the clock feeding the
CPU cluster and must never be disabled.
Fixes: 5e77b4ef1b19 ("clk: qcom: Add ipq6018 apss clock controller")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818220628.339366-3-robimarko@gmail.com
|
|
While working on IPQ8074 APSS driver it was discovered that IPQ6018 and
IPQ8074 use almost the same PLL and APSS clocks, however APSS driver is
currently broken.
More precisely apcs_alias0_clk_src is broken, it was added as regmap_mux
clock.
However after debugging why it was always stuck at 800Mhz, it was figured
out that its not regmap_mux compatible at all.
It is a simple mux but it uses RCG2 register layout and control bits, so
utilize the new clk_rcg2_mux_closest_ops to correctly drive it while not
having to provide a dummy frequency table.
While we are here, use ARRAY_SIZE for number of parents.
Tested on IPQ6018-CP01-C1 reference board and multiple IPQ8074 boards.
Fixes: 5e77b4ef1b19 ("clk: qcom: Add ipq6018 apss clock controller")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818220628.339366-2-robimarko@gmail.com
|
|
An RCG may act as a mux that switch between 2 parents.
This is the case on IPQ6018 and IPQ8074 where the APCS core clk that feeds
the CPU cluster clock just switches between XO and the PLL that feeds it.
Add the required ops to add support for this special configuration and use
the generic mux function to determine the rate.
This way we dont have to keep a essentially dummy frequency table to use
RCG2 as a mux.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818220628.339366-1-robimarko@gmail.com
|
|
Use ARRAY_SIZE for num_parents instead of raw number to prevent any
confusion/mistake.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724182329.9891-4-ansuelsmth@gmail.com
|
|
Convert lcc-ipq806x driver to parent_data API.
Change parent_name for pll4 to pxo_board to prepare the future to
eventually drop the double pxo board clk.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724182329.9891-3-ansuelsmth@gmail.com
|
|
Add reset definition for lcc-ipq806x.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724182329.9891-2-ansuelsmth@gmail.com
|
|
Add pcm reset define for ipq806x lcc.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724182329.9891-1-ansuelsmth@gmail.com
|
|
Both pmux instances share the same width and shift. Specify the mask at
compile time to simplify functions.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220714100351.1834711-7-dmitry.baryshkov@linaro.org
|
|
Don't store pointers to parents in struct clk_cpu_8996_pmux. Instead use
clk_hw_get_parent_by_index to fetch them.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220714100351.1834711-6-dmitry.baryshkov@linaro.org
|
|
Rather than telling everybody that we are using PLL as a parent (and
using ACD clock instead) properly select ACD as a pmux parent clock.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220714100351.1834711-5-dmitry.baryshkov@linaro.org
|
|
To simplify the code, define 1:1 fixed factor clocks to represent the
ACD pmux parent.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220714100351.1834711-4-dmitry.baryshkov@linaro.org
|
|
Switch to using devres-managed version of clk_notifier_register(). This
allows us to drop driver's remove() callback.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220714100351.1834711-3-dmitry.baryshkov@linaro.org
|
|
Replace parent_names in PLLs, secondary muxes and primary muxes with
parent_data. For primary muxes there were never any *cl_pll_acd clocks,
so instead of adding them, put the primary PLLs in both PLL_INDEX and
ACD_INDEX, then make sure ACD_INDEX is always picked over PLL_INDEX when
setting parent since we always want ACD when using the primary PLLs.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
[DB: switch to parent_hws for pmux clocks]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220714100351.1834711-2-dmitry.baryshkov@linaro.org
|
|
The clocks currently listed in clocks and clock-names are the ones
supplied by this clock controller, not the ones it consumes. Replace
them with the only clock it consumes - the on-board oscillator (XO),
and make the properties required.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220621160621.24415-6-y.oudjana@protonmail.com
|
|
There is nothing special about the secondary muxes, unlike the
primary muxes which need some extra logic to handle ACD and
switching between primary PLL and secondary mux sources. Turn
them into clk_regmap_mux and rename cpu_clk_msm8996_mux into
cpu_clk_msm8996_pmux to make it specific to primary muxes.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220621160621.24415-5-y.oudjana@protonmail.com
|
|
The power cluster comes before the performance cluster. Make
everything in the driver follow this order.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220621160621.24415-4-y.oudjana@protonmail.com
|
|
This will allow for adding them to clk_parent_data arrays
in an upcoming patch.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220621160621.24415-3-y.oudjana@protonmail.com
|
|
The parent at this index is the secondary mux, which can connect
not only to primary PLL/2 but also to XO. Rename the index to SMUX_INDEX
to better reflect the parent.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220621160621.24415-2-y.oudjana@protonmail.com
|
|
Register gates with dev in mtk_clk_simple_probe.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220813083319.45455-1-y.oudjana@protonmail.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
This allows it to be used in drivers built as modules.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20220813083249.45427-1-y.oudjana@protonmail.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Add the clock gate definition for the DPI1 hardware
in VDOSYS1.
The parent clock "hdmi_txpll" is already defined in
`mt8195.dtsi`.
Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220919-v1-2-4844816c9808@baylibre.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Expand dt-bindings slot for VDOSYS1 of MT8195.
This clock is required by the DPI1 hardware
and is a downstream of the HDMI pixel clock.
Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220919-v1-1-4844816c9808@baylibre.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
mt8192 is already using mtk_clk_simple_probe,
but not mtk_clk_simple_remove.
Let's add mtk_clk_simple_remove for mt8192.
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922091841.4099-8-miles.chen@mediatek.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
mtk_clk_simple_probe was added by Chun-Jie to simply common flow
of MediaTek clock drivers and ChenYu enhanced the error path of
mtk_clk_simple_probe and added mtk_clk_simple_remove.
Let's use mtk_clk_simple_probe and mtk_clk_simple_probe in other
MediaTek clock drivers as well.
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922091841.4099-7-miles.chen@mediatek.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
mtk_clk_simple_probe was added by Chun-Jie to simply common flow
of MediaTek clock drivers and ChenYu enhanced the error path of
mtk_clk_simple_probe and added mtk_clk_simple_remove.
Let's use mtk_clk_simple_probe and mtk_clk_simple_probe in other
MediaTek clock drivers as well.
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922091841.4099-6-miles.chen@mediatek.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
mtk_clk_simple_probe was added by Chun-Jie to simply common flow
of MediaTek clock drivers and ChenYu enhanced the error path of
mtk_clk_simple_probe and added mtk_clk_simple_remove.
Let's use mtk_clk_simple_probe and mtk_clk_simple_probe in other
MediaTek clock drivers as well.
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922091841.4099-5-miles.chen@mediatek.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
mtk_clk_simple_probe was added by Chun-Jie to simply common flow
of MediaTek clock drivers and ChenYu enhanced the error path of
mtk_clk_simple_probe and added mtk_clk_simple_remove.
Let's use mtk_clk_simple_probe and mtk_clk_simple_probe in other
MediaTek clock drivers as well.
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922091841.4099-4-miles.chen@mediatek.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
mtk_clk_simple_probe was added by Chun-Jie to simply common flow
of MediaTek clock drivers and ChenYu enhanced the error path of
mtk_clk_simple_probe and added mtk_clk_simple_remove.
Let's use mtk_clk_simple_probe and mtk_clk_simple_probe in other
MediaTek clock drivers as well.
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922091841.4099-3-miles.chen@mediatek.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
mtk_clk_simple_probe was added by Chun-Jie to simply common flow
of MediaTek clock drivers and ChenYu enhanced the error path of
mtk_clk_simple_probe and added mtk_clk_simple_remove.
Let's use mtk_clk_simple_probe and mtk_clk_simple_probe in other
MediaTek clock drivers as well.
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922091841.4099-2-miles.chen@mediatek.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Add the clock drivers for the entire clock tree of MediaTek Helio X10
MT6795, including system clocks (apmixedsys, infracfg, pericfg, topckgen)
and multimedia clocks (mmsys, mfg, vdecsys, vencsys).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220921091455.41327-9-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
The ref2usb_tx clock was introduced a long time ago and, at that time,
the MediaTek clock drivers were using CLK_OF_DECLARE, so they would
never unregister.
Nowadays, unregistering clock drivers is a thing, as we're registering
them as platform_driver and allowing them to be kernel modules: add a
helper function to cleanup the ref2usb_tx clock during error handling
and upon module removal.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220921091455.41327-8-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
In order to compile the clock drivers for various MediaTek SoCs as
modules, it is necessary to export a few functions from the MediaTek
specific clocks (and reset) libraries.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220921091455.41327-7-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Remove an unneeded __init annotation from the declaration of function
mtk_clk_register_ref2usb_tx(): this avoids section mismatch warnings
during modpost phase when called from functions that have no such
annotation (useful when clocks are platform drivers).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220921091455.41327-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Add the bindings for the clock drivers of the MediaTek Helio X10
MT6795 SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220921091455.41327-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Add the reset controller bindings for MT6795.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220921091455.41327-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Add the bindings for MT6795's clock controller.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220921091455.41327-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Document the MediaTek Helio X10 (MT6795) bindings for the apmixedsys,
infracfg, topckgen, pericfg and mmsys system controllers.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220921091455.41327-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Change SPDX-License-Identifier to (GPL-2.0+ OR MIT)
for Rockchip clock bindings.
Cc: Heiko Stübner <heiko@sntech.de>
Cc: Elaine Zhang <zhangqing@rock-chips.com>
Cc: Xing Zheng <zhengxing@rock-chips.com>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Finley Xiao <finley.xiao@rock-chips.com>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Eric Engestrom <eric@engestrom.ch>
Cc: Mylène Josserand <mylene.josserand@collabora.com>
Cc: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Acked-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20c6a502-2ff5-bdb1-fb4f-0741f3a2c19c@gmail.com
[Rockchip Ack/request for dual licensing dt-bindings at
https://lore.kernel.org/all/510d1180-bc8e-7820-c772-ed7f35447087@rock-chips.com/]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Convert rockchip,rk3128-cru.txt to YAML.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/4e69a06d-7b53-ab48-1e50-2b29ff3a54e6@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Clock & Reset Unit (CRU) in RV1126 support clocks for CRU
and CRU_PMU blocks.
This patch is trying to add minimal Clock-Architecture Diagram's
inferred from [1] authored by Finley Xiao.
[1] https://github.com/rockchip-linux/kernel/blob/develop-4.19/drivers/clk/rockchip/clk-rv1126.c
Cc: linux-clk@vger.kernel.org
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20220915163947.1922183-5-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The clk topology is as below:
bus_aon_root------>\ /--->SAI IPG
-->SAI LPCG gate-->
sai[x]_clk_root--->/ \--->SAI MCLK
So use shared count as i.MX93 MU_B gate.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220830033137.4149542-9-peng.fan@oss.nxp.com
|
|
The clk tree should be as:
bus_aon_root------>\ /--->MU1_B IP
-->MU_B gate-->
bus_wakeup_root--->/ \--->MU2_B IP
bus_aon_root------>\ /--->MU1_A IP
-->MU_A gate-->
bus_wakeup_root--->/ \--->MU2_A IP
So need use shared count gate. And linux use MU_B,
so set MU_A clk as CLK_IGNORE_UNUSED.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220830033137.4149542-8-peng.fan@oss.nxp.com
|
|
Use i.MX93 specific clk gate API
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220830033137.4149542-7-peng.fan@oss.nxp.com
|
|
i.MX93 LPCG is different from i.MX8M CCGR. Although imx_clk_hw_gate4_flags
is used here, it not strictly match i.MX93. i.MX93 has such design:
- LPCG_DIRECT use BIT0 as on/off gate when LPCG_AUTHEN CPU_LPM is 0
- LPCG_LPM_CUR use BIT[2:0] as on/off gate when LPCG_AUTHEN CPU_LPM is 1
The current implementation suppose CPU_LPM is 0, and use LPCG_DIRECT
BIT[1:0] as on/off gate. Although BIT1 is touched, actually BIT1 is
reserved.
And imx_clk_hw_gate4_flags use mask 0x3 to determine whether the clk
is enabled or not, but i.MX93 LPCG only use BIT0 to control when CPU_LPM
is 0. So clk disabled unused during kernel boot not able to gate off
the unused clocks.
To match i.MX93 LPCG, introduce imx93_clk_gate.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220830033137.4149542-6-peng.fan@oss.nxp.com
|
|
The CCM ROOT AUTHEN register WHITE_LIST indicate:
Each bit in this field represent for one domain. Bit16~Bit31 represent
for DOMAIN0~DOMAIN15 respectively. Only corresponding bit of the domains
is set to 1 can change the registers of this Clock Root.
i.MX93 DID is 3, so if BIT(3 + WHITE_LIST_SHIFT) is 0, the clk should be
set to read only. To make the imx93_clk_composite_flags be reusable,
add a new parameter named did(domain id);
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220830033137.4149542-5-peng.fan@oss.nxp.com
|
|
i.MX93 CCM ROOT STAT register has a SLICE_BUSY bit:
indication for clock generation logic is applying new setting.
0b - Clock generation logic is not busy.
1b - Clock generation logic is applying new setting.
So when set parent/rate/gate, need check this bit.
Introduce specific ops to do the work.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220830033137.4149542-4-peng.fan@oss.nxp.com
|
|
Add MU[1,2]_[A,B] clock entries.
Add SAI IPG clock entries.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220830033137.4149542-2-peng.fan@oss.nxp.com
|
|
Avoid the following checkpatch warning:
include/dt-bindings/clock/imx8mm-clock.h:284: check: Please don't use
multiple blank lines
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220722215445.3548530-13-marcel@ziswiler.com
|
|
Add the module clocks used by the Ethernet AVB (EtherAVB-IF) blocks on
the Renesas R-Car V4H (R8A779G0) SoC.
Based on a larger patch in the BSP by Kazuya Mizuguchi.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e9382b0d9acc84acc2357a6921a1459f3a32240e.1662714852.git.geert+renesas@glider.be
|
