summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-18clk: renesas: r8a779g0: Add PFC/GPIO clocksGeert Uytterhoeven
Add the module clocks used by the Pin Function Controller (PFC) and General Purpose Input/Output (GPIO) blocks on the Renesas R-Car V4H (R8A779G0) SoC. Extracted from a larger patch in the BSP by Kazuya Mizuguchi. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/cc6a22f0ad49643e17b9921b27aa9cf0a3b8d57a.1662714852.git.geert+renesas@glider.be
2022-09-18clk: renesas: r8a779g0: Add I2C clocksGeert Uytterhoeven
Add the module clocks used by the I2C Bus Interfaces on the Renesas R-Car V4H (R8A779G0) SoC. Extracted from a larger patch in the BSP by Kazuya Mizuguchi. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/f4b94f37950f6e976b68d0b32c324fb026d8b696.1662714852.git.geert+renesas@glider.be
2022-09-18clk: renesas: r8a779g0: Add watchdog clockGeert Uytterhoeven
Add the module clock used by the RCLK Watchdog Timer on the Renesas R-Car V4H (R8A779G0) SoC. Extracted from a larger patch in the BSP by Kazuya Mizuguchi. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/a012e4449b976efbeaabebb983fa6cfc1b9329d3.1662714852.git.geert+renesas@glider.be
2022-09-17dt-bindings: clock: rockchip: Document RV1126 CRUJagan Teki
Document dt-bindings for Rockchip RV1126 clock controller. Cc: linux-clk@vger.kernel.org Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jagan Teki <jagan@edgeble.ai> Link: https://lore.kernel.org/r/20220915163947.1922183-4-jagan@edgeble.ai Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-17Merge branch 'v6.1-shared/clkids' into v6.1-clock/nextHeiko Stuebner
2022-09-17clk: rockchip: Add dt-binding header for RV1126Jagan Teki
Add the dt-bindings header for the Rockchip RV1126, that gets shared between the clock controller and the clock references in the dts. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by: Jagan Teki <jagan@edgeble.ai> Link: https://lore.kernel.org/r/20220915163947.1922183-3-jagan@edgeble.ai Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-15clk: at91: sama5d2: Add Generic Clocks for UART/USARTSergiu Moga
Add the generic clocks for UART/USART in the sama5d2 driver to allow them to be registered in the Common Clock Framework. Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220913142205.162399-14-sergiu.moga@microchip.com
2022-09-14clk: microchip: add PolarFire SoC fabric clock supportConor Dooley
Add a driver to support the PLLs in PolarFire SoC's Clock Conditioning Circuitry, an instance of which is located in each ordinal corner of the FPGA. Only get_rate() is supported as these clocks are intended to be statically configured by the FPGA design. Currently, the DLLs are not supported by this driver. For more information on the hardware, see "PolarFire SoC FPGA Clocking Resources" in the link below. Link: https://onlinedocs.microchip.com/pr/GUID-8F0CC4C0-0317-4262-89CA-CE7773ED1931-en-US-1/index.html Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220908143651.1252601-5-conor.dooley@microchip.com
2022-09-14dt-bindings: clk: add PolarFire SoC fabric clock idsConor Dooley
Each Clock Conditioning Circuitry block contains 2 PLLs and 2 DLLs. The PLLs have 4 outputs each and the DLLs 2. Add 16 new IDs covering these clocks. For more information on the CCC hardware, see the "PolarFire SoC FPGA Clocking Resources" document at the link below. Link: https://onlinedocs.microchip.com/pr/GUID-8F0CC4C0-0317-4262-89CA-CE7773ED1931-en-US-1/index.html Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220908143651.1252601-4-conor.dooley@microchip.com
2022-09-14dt-bindings: clk: document PolarFire SoC fabric clocksConor Dooley
On PolarFire SoC there are 4 PLL/DLL blocks, located in each of the ordinal corners of the chip, which our documentation refers to as "Clock Conditioning Circuitry". PolarFire SoC is an FPGA, these are highly configurable & many of the input clocks are optional. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220908143651.1252601-3-conor.dooley@microchip.com
2022-09-14dt-bindings: clk: rename mpfs-clkcfg bindingConor Dooley
The filename for a binding is supposed to match the first compatible, but the mpfs-clkcfg file did not follow this policy. Rename it to match so that when other mpfs clock bindings are added things make more sense. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220908143651.1252601-2-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: update module authorship & licencingConor Dooley
Padmarao wrote the driver in its original, pre upstream form. Daire & myself have been responsible for getting it upstreamable and subsequent development. Move Daire out of the blurb & into a MODULE_AUTHOR entry & add entries for myself and Padmarao. While we are at it, convert the MODULE_LICENSE field to its preferred form of "GPL". Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-15-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: convert periph_clk to clk_gateConor Dooley
With the reset code moved to the recently added reset controller, there is no need for custom ops any longer. Remove the custom ops and the custom struct by converting to a clk_gate. Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-14-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: convert cfg_clk to clk_dividerConor Dooley
The cfg_clk struct is now just a redefinition of the clk_divider struct with custom implentations of the ops, that implement an extra level of redirection. Remove the custom struct and replace it with clk_divider. Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-13-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: delete 2 line mpfs_clk_register_foo()Conor Dooley
The register functions are now comprised of only a single operation each and no longer add anything to the driver. Delete them. Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-12-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: simplify control reg accessConor Dooley
The control reg addresses are known when the clocks are registered, so we can, instead of assigning a base pointer to the structs, assign the control reg addresses directly. Accordingly, remove the interim variables used during reads/writes to those registers. Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-11-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: move id & offset out of clock structsConor Dooley
The id and offset are the only thing differentiating the clock structs from "regular" clock structures. On the pretext of converting to more normal structures, move the id and offset out of the clock structs and into the hw structs instead. Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-10-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: add MSS pll's set & round rateConor Dooley
The MSS pll is not a fixed frequency clock, so add set() & round_rate() support. Control is limited to a 7 bit output divider as other devices on the FPGA occupy the other three outputs of the PLL & prevent changing the multiplier. Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-9-conor.dooley@microchip.com
2022-09-14MAINTAINERS: add polarfire soc reset controllerConor Dooley
Add the newly added reset controller for the PolarFire SoC (MPFS) to the existing MAINTAINERS entry. Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-7-conor.dooley@microchip.com
2022-09-14reset: add polarfire soc reset supportConor Dooley
Add support for the resets on Microchip's PolarFire SoC (MPFS). Reset control is a single register, wedged in between registers for clock control. To fit with existed DT etc, the reset controller is created using the aux device framework & set up in the clock driver. Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-6-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: add reset controllerConor Dooley
Add a reset controller to PolarFire SoC's clock driver. This reset controller is registered as an aux device and read/write functions exported to the drivers namespace so that the reset controller can access the peripheral device reset register. Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-5-conor.dooley@microchip.com
2022-09-14dt-bindings: clk: microchip: mpfs: add reset controller supportConor Dooley
The "peripheral" devices on PolarFire SoC can be put into reset, so update the device tree binding to reflect the presence of a reset controller. Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-4-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: make the rtc's ahb clock criticalConor Dooley
The onboard RTC's AHB bus clock must be kept running as the RTC will stop & lose track of time if the AHB interface clock is disabled. Fixes: 635e5e73370e ("clk: microchip: Add driver for Microchip PolarFire SoC") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-3-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: fix clk_cfg array bounds violationConor Dooley
There is an array bounds violation present during clock registration, triggered by current code by only specific toolchains. This seems to fail gracefully in v6.0-rc1, using a toolchain build from the riscv- gnu-toolchain repo and with clang-15, and life carries on. While converting the driver to use standard clock structs/ops, kernel panics were seen during boot when built with clang-15: [ 0.581754] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b1 [ 0.591520] Oops [#1] [ 0.594045] Modules linked in: [ 0.597435] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc1-00011-g8e1459cf4eca #1 [ 0.606188] Hardware name: Microchip PolarFire-SoC Icicle Kit (DT) [ 0.613012] epc : __clk_register+0x4a6/0x85c [ 0.617759] ra : __clk_register+0x49e/0x85c [ 0.622489] epc : ffffffff803faf7c ra : ffffffff803faf74 sp : ffffffc80400b720 [ 0.630466] gp : ffffffff810e93f8 tp : ffffffe77fe60000 t0 : ffffffe77ffb3800 [ 0.638443] t1 : 000000000000000a t2 : ffffffffffffffff s0 : ffffffc80400b7c0 [ 0.646420] s1 : 0000000000000001 a0 : 0000000000000001 a1 : 0000000000000000 [ 0.654396] a2 : 0000000000000001 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.662373] a5 : ffffffff803a5810 a6 : 0000000200000022 a7 : 0000000000000006 [ 0.670350] s2 : ffffffff81099d48 s3 : ffffffff80d6e28e s4 : 0000000000000028 [ 0.678327] s5 : ffffffff810ed3c8 s6 : ffffffff810ed3d0 s7 : ffffffe77ffbc100 [ 0.686304] s8 : ffffffe77ffb1540 s9 : ffffffe77ffb1540 s10: 0000000000000008 [ 0.694281] s11: 0000000000000000 t3 : 00000000000000c6 t4 : 0000000000000007 [ 0.702258] t5 : ffffffff810c78c0 t6 : ffffffe77ff88cd0 [ 0.708125] status: 0000000200000120 badaddr: 00000000000000b1 cause: 000000000000000d [ 0.716869] [<ffffffff803fb892>] devm_clk_hw_register+0x62/0xaa [ 0.723420] [<ffffffff80403412>] mpfs_clk_probe+0x1e0/0x244 In v6.0-rc1 and later, this issue is visible without the follow on patches doing the conversion using toolchains provided by our Yocto meta layer too. It fails on "clk_periph_timer" - which uses a different parent, that it tries to find using the macro: \#define PARENT_CLK(PARENT) (&mpfs_cfg_clks[CLK_##PARENT].cfg.hw) If parent is RTCREF, so the macro becomes: &mpfs_cfg_clks[33].cfg.hw which is well beyond the end of the array. Amazingly, builds with GCC 11.1 see no problem here, booting correctly and hooking the parent up etc. Builds with clang-15 do not, with the above panic. Change the macro to use specific offsets depending on the parent rather than the dt-binding's clock IDs. Fixes: 1c6a7ea32b8c ("clk: microchip: mpfs: add RTCREF clock control") CC: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-2-conor.dooley@microchip.com
2022-09-13clk: qcom: smd-rpm: Add clocks for MSM8909Stephan Gerhold
MSM8909 has mostly the same as clocks in RPM as MSM8916, but additionally the QPIC clock for the NAND flash controller. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220706134132.3623415-7-stephan.gerhold@kernkonzept.com
2022-09-13dt-bindings: clock: qcom,rpmcc: Add MSM8909Stephan Gerhold
Document the "qcom,rpmcc-msm8909" compatible for the clocks available via the RPM on the MSM8909 SoC. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220706134132.3623415-6-stephan.gerhold@kernkonzept.com
2022-09-13clk: qcom: gcc-msm8909: Increase delay for USB PHY resetStephan Gerhold
The USB PHY on MSM8909 works with the driver used on MSM8916 (phy-qcom-usb-hs.c). When turning the PHY on/off it is first reset using the standard reset controller API. On MSM8916 the reset is provided by the USB driver (ci_hdrc_msm_por_reset() in ci_hdrc_msm.c). While this seems to work on MSM8909 as well, the Qualcomm Linux sources suggest that the PHY should be reset using the GCC_USB2_HS_PHY_ONLY_BCR register instead. In general this is easy to set up in the device tree, thanks to the standard reset controller API. However, to conform to the specifications of the PHY the reset signal should be asserted for at least 10 us. This is handled correctly on MSM8916 in ci_hdrc_msm_por_reset(), but not within the GCC driver. Fix this by making use of the new "udelay" field of qcom_reset_map and set a delay of ~15 us between the assertion/deassertion of the USB PHY reset signal. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220706134132.3623415-5-stephan.gerhold@kernkonzept.com
2022-09-13clk: qcom: reset: Allow specifying custom reset delayStephan Gerhold
The amount of time required between asserting and deasserting the reset signal can vary depending on the involved hardware component. Sometimes 1 us might not be enough and a larger delay is necessary to conform to the specifications. Usually this is worked around in the consuming drivers, by replacing reset_control_reset() with a sequence of reset_control_assert(), waiting for a custom delay, followed by reset_control_deassert(). However, in some cases the driver making use of the reset is generic and can be used with different reset controllers. In this case the reset time requirement is better handled directly by the reset controller driver. Make this possible by adding an "udelay" field to the qcom_reset_map that allows setting a different reset delay (in microseconds). Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220706134132.3623415-4-stephan.gerhold@kernkonzept.com
2022-09-13clk: qcom: Add driver for MSM8909 GCCStephan Gerhold
The Global Clock Controller (GCC) in the MSM8909 SoC provides clocks, resets and power domains for the various hardware blocks in the SoC. Add a driver for it to make it possible to enable additional functionality for the SoC. Work on this driver was originally started independently by Dominik, I picked it up and added missing clocks/resets, as well as various cleanup to bring it into shape for mainline. Co-developed-by: Dominik Kobinski <dominikkobinski314@gmail.com> Signed-off-by: Dominik Kobinski <dominikkobinski314@gmail.com> Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220706134132.3623415-3-stephan.gerhold@kernkonzept.com
2022-09-13dt-bindings: clock: Add schema for MSM8909 GCCStephan Gerhold
The Global Clock Controller (GCC) in the MSM8909 SoC provides clocks, resets and power domains for the various hardware blocks in the SoC. Add a DT schema to describe it, similar to other Qualcomm SoCs. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220706134132.3623415-2-stephan.gerhold@kernkonzept.com
2022-09-13clk: qcom: mmcc-msm8960: use parent_hws/_data instead of parent_namesDmitry Baryshkov
Convert the clock driver to specify parent data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Use parent_hws where possible to refer parent clocks directly, skipping the lookup. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: David Heidelberg <david@ixit.cz> # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220623120418.250589-10-dmitry.baryshkov@linaro.org
2022-09-13clk: qcom: mmcc-msm8960: move clock parent tables downDmitry Baryshkov
Move clock parent tables down, after the PLL declrataions, so that we can use pll hw clock fields in the next commit. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: David Heidelberg <david@ixit.cz> # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220623120418.250589-9-dmitry.baryshkov@linaro.org
2022-09-13clk: qcom: mmcc-msm8960: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: David Heidelberg <david@ixit.cz> # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220623120418.250589-8-dmitry.baryshkov@linaro.org
2022-09-13clk: qcom: lcc-msm8960: use parent_hws/_data instead of parent_namesDmitry Baryshkov
Convert the clock driver to specify parent data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Use parent_hws where possible to refer parent clocks directly, skipping the lookup. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: David Heidelberg <david@ixit.cz> # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220623120418.250589-7-dmitry.baryshkov@linaro.org
2022-09-13clk: qcom: lcc-msm8960: use macros to implement mi2s clocksDmitry Baryshkov
Split and extend existing CLK_AIF_OSR_DIV macro to implement mi2s clocks. This simplifies the driver and removes extra code duplication. The clock mi2s_div_clk used .enable_reg/.enable_bit, however these fields are not used with by the clk_regmap_div_ops, thus they are silently dropped. Clock enablement is handled in the mi2s_bit_div_clk clock. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: David Heidelberg <david@ixit.cz> # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220623120418.250589-6-dmitry.baryshkov@linaro.org
2022-09-13clk: qcom: gcc-msm8960: use parent_hws/_data instead of parent_namesDmitry Baryshkov
Convert the clock driver to specify parent data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Use parent_hws where possible to refer parent clocks directly, skipping the lookup. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: David Heidelberg <david@ixit.cz> # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220623120418.250589-5-dmitry.baryshkov@linaro.org
2022-09-13clk: qcom: gcc-msm8960: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: David Heidelberg <david@ixit.cz> # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220623120418.250589-4-dmitry.baryshkov@linaro.org
2022-09-13dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8960Dmitry Baryshkov
Define clock/clock-names properties of the MMCC device node to be used on MSM8960/APQ8064 platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: David Heidelberg <david@ixit.cz> # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220623120418.250589-3-dmitry.baryshkov@linaro.org
2022-09-13dt-bindings: clocks: qcom,gcc-apq8064: define clocks/-names propertiesDmitry Baryshkov
Define clock/clock-names properties of the GCC device node to be used on MSM8960/APQ8064 platforms. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: David Heidelberg <david@ixit.cz> # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220623120418.250589-2-dmitry.baryshkov@linaro.org
2022-09-13clk: qcom: clk-rpmh: Remove redundant if statementLi Zhengyu
By the clk framework already reference counts prepare/unprepare, this if statement should be never true. Signed-off-by: Li Zhengyu <lizhengyu3@huawei.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220613063327.89320-1-lizhengyu3@huawei.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2022-09-13clk: qcom: gcc-sdm845: add sdm670 global clock dataRichard Acayan
The Snapdragon 670 adds and removes some clocks, adds new frequencies, and adds a new GPLL (Global Phase-Locked Loop) in reference to SDM845, while also removing some GDSCs. Despite these differences, there are many similarities with SDM670. Add data for SDM670 in the driver for SDM845 to reuse the most of the clock data. Advantages and disadvantages of this approach: + maintenance applies to both sdm670 and sdm845 by default + less duplicate code (clocks) means smaller distro/pre-built kernels with all drivers enabled - clocks for both SoC's must be compiled if the user wants clocks for one specific SoC (both or none) - additional testing needed for sdm845 devices Link: https://android.googlesource.com/kernel/msm/+/443bd8d6e2cf54698234c752e6de97b4b8a528bd%5E%21/#F10 Signed-off-by: Richard Acayan <mailingradian@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220914013922.198778-4-mailingradian@gmail.com
2022-09-13clk: qcom: gcc-sdm845: use device tree match dataRichard Acayan
This driver will support more than one SoC's set of clocks, and set of GDSCs. This behavior would be unclean with hard-coded static variables. Support it by grabbing clocks, GDSCs, and BCRs in the match data. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220914013922.198778-3-mailingradian@gmail.com
2022-09-13dt-bindings: clock: gcc-sdm845: add sdm670 global clocksRichard Acayan
The Snapdragon 670 clocks will be added into the sdm845 gcc driver. Most of the new clocks, GDSCs, and resets already have reserved IDs but there are some resources that don't. Add the new clock from Snapdragon 670 and document the differences between the SoC parent clocks. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220914013922.198778-2-mailingradian@gmail.com
2022-09-13clk: qcom: a53-pll: convert to use parent_data rather than parent_namesDmitry Baryshkov
Change a53-pll driver to use clk_parent_data rather than always looking up the xo clock in the system clock list. Note, this change also switches the a53-pll from the global `xo' clock to the `xo_board', the clock that is specified as the `xo' clock in the DT file. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220909103137.3727830-1-dmitry.baryshkov@linaro.org
2022-09-13clk: qcom: gcc-msm8660: use parent_hws/_data instead of parent_namesDmitry Baryshkov
Convert the clock driver to specify parent data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Use parent_hws where possible to refer parent clocks directly, skipping the lookup. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220909105136.3733919-4-dmitry.baryshkov@linaro.org
2022-09-13clk: qcom: gcc-msm8660: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220909105136.3733919-3-dmitry.baryshkov@linaro.org
2022-09-13dt-bindings: clock: qcom,gcc-msm8660: separate GCC bindings for MSM8660Dmitry Baryshkov
Create a separate DT bindings for Global Clock Controller on MSM8660 platform. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220909105136.3733919-2-dmitry.baryshkov@linaro.org
2022-09-13clk: qcom: sm6115: Select QCOM_GDSCDang Huynh
While working on the Fxtec Pro1X device, this error shows up with my own minimal configuration: gcc-sm6115: probe of 1400000.clock-controller failed with error -38 The clock driver depends on CONFIG_QCOM_GDSC and after enabling that, the driver probes successfully. Signed-off-by: Dang Huynh <danct12@riseup.net> Fixes: cbe63bfdc54f ("clk: qcom: Add Global Clock controller (GCC) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220910170207.1592220-1-danct12@riseup.net
2022-09-13clk: qcom: lpass: Add support for resets & external mclk for SC7280Taniya Das
The clock gating control for TX/RX/WSA core bus clocks would be required to be reset(moved from hardware control) from audio core driver. Thus add the support for the reset clocks. Update the lpass_aon_cc_main_rcg_clk_src ops to park the RCG at XO after disable as this clock signal is used by hardware to turn ON memories in LPASS. Also add the external mclk to interface external MI2S. Fixes: a9dd26639d05 ("clk: qcom: lpass: Add support for LPASS clock controller for SC7280") Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1662005846-4838-6-git-send-email-quic_c_skakit@quicinc.com
2022-09-13clk: qcom: lpass: Handle the regmap overlap of lpasscc and lpass_aonTaniya Das
Move registration of lpass_q6ss_ahbm_clk and lpass_q6ss_ahbs_clk to lpass_aon_cc_sc7280_probe and register them only if "qcom,adsp-pil-mode" is enabled in the lpass_aon DT node. Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1662005846-4838-3-git-send-email-quic_c_skakit@quicinc.com
generated by cgit (git 2.34.1) at 2025-09-27 13:36:10 +0000