summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-09-14iio: adc: at91: don't use the last converted data registerLudovic Desroches
If touchscreen mode is enabled and a conversion is requested on another channel, the result in the last converted data register can be a touchscreen relative value. Starting a conversion involves to do a conversion for all active channel. It starts with ADC channels and ends with touchscreen channels. Then if ADC_LCD register is not read quickly, its content may be a touchscreen conversion. To remove this temporal constraint, the conversion value is taken from the channel data register. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14iio: adc: xilinx-xadc: assign auxiliary channels address correctlySubbaraya Sundeep Bhatta
This patch fixes incorrect logic for assigning address to auxiliary channels of xilinx xadc. Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14KVM: check for !is_zero_pfn() in kvm_is_mmio_pfn()Ard Biesheuvel
Read-only memory ranges may be backed by the zero page, so avoid misidentifying it a a MMIO pfn. This fixes another issue I identified when testing QEMU+KVM_UEFI, where a read to an uninitialized emulated NOR flash brought in the zero page, but mapped as a read-write device region, because kvm_is_mmio_pfn() misidentifies it as a MMIO pfn due to its PG_reserved bit being set. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Fixes: b88657674d39 ("ARM: KVM: user_mem_abort: support stage 2 MMIO page mapping") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-14mm: export symbol dependencies of is_zero_pfn()Ard Biesheuvel
In order to make the static inline function is_zero_pfn() callable by modules, export its symbol dependencies 'zero_pfn' and (for s390 and mips) 'zero_page_mask'. We need this for KVM, as CONFIG_KVM is a tristate for all supported architectures except ARM and arm64, and testing a pfn whether it refers to the zero page is required to correctly distinguish the zero page from other special RAM ranges that may also have the PG_reserved bit set, but need to be treated as MMIO memory. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-14x86 early_ioremap: Increase FIX_BTMAPS_SLOTS to 8Dave Young
3.16 kernel boot fail with earlyprintk=efi, it keeps scrolling at the bottom line of screen. Bisected, the first bad commit is below: commit 86dfc6f339886559d80ee0d4bd20fe5ee90450f0 Author: Lv Zheng <lv.zheng@intel.com> Date: Fri Apr 4 12:38:57 2014 +0800 ACPICA: Tables: Fix table checksums verification before installation. I did some debugging by enabling both serial and efi earlyprintk, below is some debug dmesg, seems early_ioremap fails in scroll up function due to no free slot, see below dmesg output: WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:116 __early_ioremap+0x90/0x1c4() __early_ioremap(ed00c800, 00000c80) not found slot Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.17.0-rc1+ #204 Hardware name: Hewlett-Packard HP Z420 Workstation/1589, BIOS J61 v03.15 05/09/2013 Call Trace: dump_stack+0x4e/0x7a warn_slowpath_common+0x75/0x8e ? __early_ioremap+0x90/0x1c4 warn_slowpath_fmt+0x47/0x49 __early_ioremap+0x90/0x1c4 ? sprintf+0x46/0x48 early_ioremap+0x13/0x15 early_efi_map+0x24/0x26 early_efi_scroll_up+0x6d/0xc0 early_efi_write+0x1b0/0x214 call_console_drivers.constprop.21+0x73/0x7e console_unlock+0x151/0x3b2 ? vprintk_emit+0x49f/0x532 vprintk_emit+0x521/0x532 ? console_unlock+0x383/0x3b2 printk+0x4f/0x51 acpi_os_vprintf+0x2b/0x2d acpi_os_printf+0x43/0x45 acpi_info+0x5c/0x63 ? __acpi_map_table+0x13/0x18 ? acpi_os_map_iomem+0x21/0x147 acpi_tb_print_table_header+0x177/0x186 acpi_tb_install_table_with_override+0x4b/0x62 acpi_tb_install_standard_table+0xd9/0x215 ? early_ioremap+0x13/0x15 ? __acpi_map_table+0x13/0x18 acpi_tb_parse_root_table+0x16e/0x1b4 acpi_initialize_tables+0x57/0x59 acpi_table_init+0x50/0xce acpi_boot_table_init+0x1e/0x85 setup_arch+0x9b7/0xcc4 start_kernel+0x94/0x42d ? early_idt_handlers+0x120/0x120 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0xf3/0x100 Quote reply from Lv.zheng about the early ioremap slot usage in this case: """ In early_efi_scroll_up(), 2 mapping entries will be used for the src/dst screen buffer. In drivers/acpi/acpica/tbutils.c, we've improved the early table loading code in acpi_tb_parse_root_table(). We now need 2 mapping entries: 1. One mapping entry is used for RSDT table mapping. Each RSDT entry contains an address for another ACPI table. 2. For each entry in RSDP, we need another mapping entry to map the table to perform necessary check/override before installing it. When acpi_tb_parse_root_table() prints something through EFI earlyprintk console, we'll have 4 mapping entries used. The current 4 slots setting of early_ioremap() seems to be too small for such a use case. """ Thus increase the slot to 8 in this patch to fix this issue. boot-time mappings become 512 page with this patch. Signed-off-by: Dave Young <dyoung@redhat.com> Cc: <stable@vger.kernel.org> # v3.16 Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-09-14Merge tag 'irqchip-urgent-3.17' of ↵Thomas Gleixner
git://git.infradead.org/users/jcooper/linux into irq/urgent irqchip fixes for v3.17 from Jason Cooper - GIC/GICV3: Various fixlets - crossbar: Fix off-by-one bug - exynos-combiner: Fix arm64 build error
2014-09-14ntb: Add alignment check to meet hardware requirementDave Jiang
The NTB translate register must have the value to be BAR size aligned. This alignment check make sure that the DMA memory allocated has the proper alignment. Another requirement for NTB to function properly with memory window BAR size greater or equal to 4M is to use the CMA feature in 3.16 kernel with the appropriate CONFIG_CMA_ALIGNMENT and CONFIG_CMA_SIZE_MBYTES set. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2014-09-14MAINTAINERS: update NTB infoJon Mason
Update my contact info to my personal email address and add Dave Jiang. Signed-off-by: Jon Mason <jon.mason@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2014-09-14NTB: correct the spread of queues over mw'sJon Mason
The detection of an uneven number of queues on the given memory windows was not correct. The mw_num is zero based and the mod should be division to spread them evenly over the mw's. Signed-off-by: Jon Mason <jon.mason@intel.com>
2014-09-13fix bogus read_seqretry() checks introduced in b37199eAl Viro
read_seqretry() returns true on mismatch, not on match... Cc: stable@vger.kernel.org # 3.15+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-13move the call of __d_drop(anon) into __d_materialise_unique(dentry, anon)Al Viro
and lock the right list there Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-13[fix] lustre: d_make_root() does iput() on dentry allocation failureAl Viro
double-free is a bad thing Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-13Merge branches 'locking-urgent-for-linus' and 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull futex and timer fixes from Thomas Gleixner: "A oneliner bugfix for the jinxed futex code: - Drop hash bucket lock in the error exit path. I really could slap myself for intruducing that bug while fixing all the other horror in that code three month ago ... and the timer department is not too proud about the following fixes: - Deal with a long standing rounding bug in the timeval to jiffies conversion. It's a real issue and this fix fell through the cracks for quite some time. - Another round of alarmtimer fixes. Finally this code gets used more widely and the subtle issues hidden for quite some time are noticed and fixed. Nothing really exciting, just the itty bitty details which bite the serious users here and there" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Unlock hb->lock in futex_wait_requeue_pi() error path * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: alarmtimer: Lock k_itimer during timer callback alarmtimer: Do not signal SIGEV_NONE timers alarmtimer: Return relative times in timer_gettime jiffies: Fix timeval conversion to jiffies
2014-09-13Merge branch 'bridge_vlan_filtering'David S. Miller
Vladislav Yasevich says: ==================== bridge: Two small fixes to vlan filtering code. This series corrects 2 small issues that I've ran across recently while doing more work with vlan filtering changes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13bridge: Allow clearing of pvid and untagged bitmapVlad Yasevich
Currently, it is possible to modify the vlan filter configuration to add pvid or untagged support. For example: bridge vlan add vid 10 dev eth0 bridge vlan add vid 10 dev eth0 untagged pvid The second statement will modify vlan 10 to include untagged and pvid configuration. However, it is currently impossible to go backwards bridge vlan add vid 10 dev eth0 untagged pvid bridge vlan add vid 10 dev eth0 Here nothing happens. This patch correct this so that any modifiers not supplied are removed from the configuration. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13bridge: Check if vlan filtering is enabled only once.Vlad Yasevich
The bridge code checks if vlan filtering is enabled on both ingress and egress. When the state flip happens, it is possible for the bridge to currently be forwarding packets and forwarding behavior becomes non-deterministic. Bridge may drop packets on some interfaces, but not others. This patch solves this by caching the filtered state of the packet into skb_cb on ingress. The skb_cb is guaranteed to not be over-written between the time packet entres bridge forwarding path and the time it leaves it. On egress, we can then check the cached state to see if we need to apply filtering information. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13bonding: fix div by zero while enslaving and transmittingNikolay Aleksandrov
The problem is that the slave is first linked and slave_cnt is incremented afterwards leading to a div by zero in the modes that use it as a modulus. What happens is that in bond_start_xmit() bond_has_slaves() is used to evaluate further transmission and it becomes true after the slave is linked in, but when slave_cnt is used in the xmit path it is still 0, so fetch it once and transmit based on that. Since it is used only in round-robin and XOR modes, the fix is only for them. Thanks to Eric Dumazet for pointing out the fault in my first try to fix this. Call trace (took it out of net-next kernel, but it's the same with net): [46934.330038] divide error: 0000 [#1] SMP [46934.330041] Modules linked in: bonding(O) 9p fscache snd_hda_codec_generic crct10dif_pclmul [46934.330041] bond0: Enslaving eth1 as an active interface with an up link [46934.330051] ppdev joydev crc32_pclmul crc32c_intel 9pnet_virtio ghash_clmulni_intel snd_hda_intel 9pnet snd_hda_controller parport_pc serio_raw pcspkr snd_hda_codec parport virtio_balloon virtio_console snd_hwdep snd_pcm pvpanic i2c_piix4 snd_timer i2ccore snd soundcore virtio_blk virtio_net virtio_pci virtio_ring virtio ata_generic pata_acpi floppy [last unloaded: bonding] [46934.330053] CPU: 1 PID: 3382 Comm: ping Tainted: G O 3.17.0-rc4+ #27 [46934.330053] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [46934.330054] task: ffff88005aebf2c0 ti: ffff88005b728000 task.ti: ffff88005b728000 [46934.330059] RIP: 0010:[<ffffffffa0198c33>] [<ffffffffa0198c33>] bond_start_xmit+0x1c3/0x450 [bonding] [46934.330060] RSP: 0018:ffff88005b72b7f8 EFLAGS: 00010246 [46934.330060] RAX: 0000000000000679 RBX: ffff88004b077000 RCX: 000000000000002a [46934.330061] RDX: 0000000000000000 RSI: ffff88004b3f0500 RDI: ffff88004b077940 [46934.330061] RBP: ffff88005b72b830 R08: 00000000000000c0 R09: ffff88004a83e000 [46934.330062] R10: 000000000000ffff R11: ffff88004b1f12c0 R12: ffff88004b3f0500 [46934.330062] R13: ffff88004b3f0500 R14: 000000000000002a R15: ffff88004b077940 [46934.330063] FS: 00007fbd91a4c740(0000) GS:ffff88005f080000(0000) knlGS:0000000000000000 [46934.330064] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [46934.330064] CR2: 00007f803a8bb000 CR3: 000000004b2c9000 CR4: 00000000000406e0 [46934.330069] Stack: [46934.330071] ffffffff811e6169 00000000e772fa05 ffff88004b077000 ffff88004b3f0500 [46934.330072] ffffffff81d17d18 000000000000002a 0000000000000000 ffff88005b72b8a0 [46934.330073] ffffffff81620108 ffffffff8161fe0e ffff88005b72b8c4 ffff88005b302000 [46934.330073] Call Trace: [46934.330077] [<ffffffff811e6169>] ? __kmalloc_node_track_caller+0x119/0x300 [46934.330084] [<ffffffff81620108>] dev_hard_start_xmit+0x188/0x410 [46934.330086] [<ffffffff8161fe0e>] ? harmonize_features+0x2e/0x90 [46934.330088] [<ffffffff81620b06>] __dev_queue_xmit+0x456/0x590 [46934.330089] [<ffffffff81620c50>] dev_queue_xmit+0x10/0x20 [46934.330090] [<ffffffff8168f022>] arp_xmit+0x22/0x60 [46934.330091] [<ffffffff8168f090>] arp_send.part.16+0x30/0x40 [46934.330092] [<ffffffff8168f1e5>] arp_solicit+0x115/0x2b0 [46934.330094] [<ffffffff8160b5d7>] ? copy_skb_header+0x17/0xa0 [46934.330096] [<ffffffff8162875a>] neigh_probe+0x4a/0x70 [46934.330097] [<ffffffff8162979c>] __neigh_event_send+0xac/0x230 [46934.330098] [<ffffffff8162a00b>] neigh_resolve_output+0x13b/0x220 [46934.330100] [<ffffffff8165f120>] ? ip_forward_options+0x1c0/0x1c0 [46934.330101] [<ffffffff81660478>] ip_finish_output+0x1f8/0x860 [46934.330102] [<ffffffff81661f08>] ip_output+0x58/0x90 [46934.330103] [<ffffffff81661602>] ? __ip_local_out+0xa2/0xb0 [46934.330104] [<ffffffff81661640>] ip_local_out_sk+0x30/0x40 [46934.330105] [<ffffffff81662a66>] ip_send_skb+0x16/0x50 [46934.330106] [<ffffffff81662ad3>] ip_push_pending_frames+0x33/0x40 [46934.330107] [<ffffffff8168854c>] raw_sendmsg+0x88c/0xa30 [46934.330110] [<ffffffff81612b31>] ? skb_recv_datagram+0x41/0x60 [46934.330111] [<ffffffff816875a9>] ? raw_recvmsg+0xa9/0x1f0 [46934.330113] [<ffffffff816978d4>] inet_sendmsg+0x74/0xc0 [46934.330114] [<ffffffff81697a9b>] ? inet_recvmsg+0x8b/0xb0 [46934.330115] bond0: Adding slave eth2 [46934.330116] [<ffffffff8160357c>] sock_sendmsg+0x9c/0xe0 [46934.330118] [<ffffffff81603248>] ? move_addr_to_kernel.part.20+0x28/0x80 [46934.330121] [<ffffffff811b4477>] ? might_fault+0x47/0x50 [46934.330122] [<ffffffff816039b9>] ___sys_sendmsg+0x3a9/0x3c0 [46934.330125] [<ffffffff8144a14a>] ? n_tty_write+0x3aa/0x530 [46934.330127] [<ffffffff810d1ae4>] ? __wake_up+0x44/0x50 [46934.330129] [<ffffffff81242b38>] ? fsnotify+0x238/0x310 [46934.330130] [<ffffffff816048a1>] __sys_sendmsg+0x51/0x90 [46934.330131] [<ffffffff816048f2>] SyS_sendmsg+0x12/0x20 [46934.330134] [<ffffffff81738b29>] system_call_fastpath+0x16/0x1b [46934.330144] Code: 48 8b 10 4c 89 ee 4c 89 ff e8 aa bc ff ff 31 c0 e9 1a ff ff ff 0f 1f 00 4c 89 ee 4c 89 ff e8 65 fb ff ff 31 d2 4c 89 ee 4c 89 ff <f7> b3 64 09 00 00 e8 02 bd ff ff 31 c0 e9 f2 fe ff ff 0f 1f 00 [46934.330146] RIP [<ffffffffa0198c33>] bond_start_xmit+0x1c3/0x450 [bonding] [46934.330146] RSP <ffff88005b72b7f8> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> Fixes: 278b208375 ("bonding: initial RCU conversion") Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13Merge branch 'r8169-net'David S. Miller
Hayes Wang says: ==================== r8169: fix rx vlan There are two issues for hw rx vlan. The patches are used to fix them. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13r8169: fix setting rx vlanhayeswang
The setting should depend on the new features not the current one. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13r8169: fix the default setting of rx vlanhayeswang
If the parameter "features" of __rtl8169_set_features() is equal to dev->features, the variable "changed" is alwayes 0, and nothing would be changed. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13parisc: Implement new LWS CAS supporting 64 bit operations.Guy Martin
The current LWS cas only works correctly for 32bit. The new LWS allows for CAS operations of variable size. Signed-off-by: Guy Martin <gmsoft@tuxicoman.be> Cc: <stable@vger.kernel.org> # 3.13+ Signed-off-by: Helge Deller <deller@gmx.de>
2014-09-13vfs: fix bad hashing of dentriesLinus Torvalds
Josef Bacik found a performance regression between 3.2 and 3.10 and narrowed it down to commit bfcfaa77bdf0 ("vfs: use 'unsigned long' accesses for dcache name comparison and hashing"). He reports: "The test case is essentially for (i = 0; i < 1000000; i++) mkdir("a$i"); On xfs on a fio card this goes at about 20k dir/sec with 3.2, and 12k dir/sec with 3.10. This is because we spend waaaaay more time in __d_lookup on 3.10 than in 3.2. The new hashing function for strings is suboptimal for < sizeof(unsigned long) string names (and hell even > sizeof(unsigned long) string names that I've tested). I broke out the old hashing function and the new one into a userspace helper to get real numbers and this is what I'm getting: Old hash table had 1000000 entries, 0 dupes, 0 max dupes New hash table had 12628 entries, 987372 dupes, 900 max dupes We had 11400 buckets with a p50 of 30 dupes, p90 of 240 dupes, p99 of 567 dupes for the new hash My test does the hash, and then does the d_hash into a integer pointer array the same size as the dentry hash table on my system, and then just increments the value at the address we got to see how many entries we overlap with. As you can see the old hash function ended up with all 1 million entries in their own bucket, whereas the new one they are only distributed among ~12.5k buckets, which is why we're using so much more CPU in __d_lookup". The reason for this hash regression is two-fold: - On 64-bit architectures the down-mixing of the original 64-bit word-at-a-time hash into the final 32-bit hash value is very simplistic and suboptimal, and just adds the two 32-bit parts together. In particular, because there is no bit shuffling and the mixing boundary is also a byte boundary, similar character patterns in the low and high word easily end up just canceling each other out. - the old byte-at-a-time hash mixed each byte into the final hash as it hashed the path component name, resulting in the low bits of the hash generally being a good source of hash data. That is not true for the word-at-a-time case, and the hash data is distributed among all the bits. The fix is the same in both cases: do a better job of mixing the bits up and using as much of the hash data as possible. We already have the "hash_32|64()" functions to do that. Reported-by: Josef Bacik <jbacik@fb.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-13Make hash_64() use a 64-bit multiply when appropriateLinus Torvalds
The hash_64() function historically does the multiply by the GOLDEN_RATIO_PRIME_64 number with explicit shifts and adds, because unlike the 32-bit case, gcc seems unable to turn the constant multiply into the more appropriate shift and adds when required. However, that means that we generate those shifts and adds even when the architecture has a fast multiplier, and could just do it better in hardware. Use the now-cleaned-up CONFIG_ARCH_HAS_FAST_MULTIPLIER (together with "is it a 64-bit architecture") to decide whether to use an integer multiply or the explicit sequence of shift/add instructions. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-13Make ARCH_HAS_FAST_MULTIPLIER a real config variableLinus Torvalds
It used to be an ad-hoc hack defined by the x86 version of <asm/bitops.h> that enabled a couple of library routines to know whether an integer multiply is faster than repeated shifts and additions. This just makes it use the real Kconfig system instead, and makes x86 (which was the only architecture that did this) select the option. NOTE! Even for x86, this really is kind of wrong. If we cared, we would probably not enable this for builds optimized for netburst (P4), where shifts-and-adds are generally faster than multiplies. This patch does *not* change that kind of logic, though, it is purely a syntactic change with no code changes. This was triggered by the fact that we have other places that really want to know "do I want to expand multiples by constants by hand or not", particularly the hash generation code. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-13Merge tag 'dm-3.17-fix2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fix from Mike Snitzer: "Fix a race in the DM cache target that caused dirty blocks to be marked as clean. This could cause no writeback to occur or spurious dirty block counts" * tag 'dm-3.17-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: fix race causing dirty blocks to be marked as clean
2014-09-13drivers: net: cpsw: dual_emac: in suspend/resume bring down/up all the netdevMugunthan V N
During suspend and resume in Dual EMAC, second port is not working as in suspend/resume only the first slave netdev is closed and opened. So bring down and up all the interfaces that are up during suspend/resume. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13ASoC: rockchip-i2s: dt: swap tx and rx channed request number in exampleJianqun
Reference to RK3288 TRM, fix an error channel id for i2s tx and rx Table 10-1 DMAC_BUS Request Mapping Table Req number Source Polarity 0 I2S tx High level 1 I2S rx High level Tested on RK3288 board. Signed-off-by: Jianqun <jay.xu@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-13Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A small collection of fixes for the current rc series. This contains: - Two small blk-mq patches from Rob Elliott, cleaning up error case at init time. - A fix from Ming Lei, fixing SG merging for blk-mq where QUEUE_FLAG_SG_NO_MERGE is the default. - A dev_t minor lifetime fix from Keith, fixing an issue where a minor might be reused before all references to it were gone. - Fix from Alan Stern where an unbalanced queue bypass caused SCSI some headaches when it does a series of add/del on devices without fully registrering the queue. - A fix from me for improving the scaling of tag depth in blk-mq if we are short on memory" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: scale depth and rq map appropriate if low on memory Block: fix unbalanced bypass-disable in blk_register_queue block: Fix dev_t minor allocation lifetime blk-mq: cleanup after blk_mq_init_rq_map failures blk-mq: pass along blk_mq_alloc_tag_set return values blk-merge: fix blk_recount_segments
2014-09-13ASoC: rockchip-i2s: fix registers' property of rockchip i2s controllerJianqun
Reference rockchip I2S controller TRM, modify some registers' property I2S_FIFOLR: read / write, but not volatile, not precious I2S_INTSR: read / write I2S_CLR: volatile, register value will be cleared by read Test on RK3288 with max98090. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-13ASoC: rockchip-i2s: fix master mode set bit errorJianqun
Fix error format set to I2S master or slave mode. Test on RK3288 board with max98090. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-13spi: davinci: request cs_gpio's from probeGrygorii Strashko
Now CS GPIOs are requested from struct spi_master.setup() callback and that causes failures when Client SPI device is getting accessed through SPIDEV driver. The failure happens, because .setup() callback may be called many times from IOCTL handler and when it's called second time gpio_request() will fail and return -EBUSY. Hence, fix it by moving CS GPIOs requesting code in .probe(). Reported-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-13spi: dw: don't use mrst prefix anymoreAndy Shevchenko
Since driver is used on other platforms and debugfs stuff would be useful there as well let's substitute mrst_ by dw_ where it suits. Additionally let's use SPI master device name when print registers dump. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-13Merge branch 'topic/checkpatch' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-dw
2014-09-13spi: dw-mid: remove FSF address and update copyrightAndy Shevchenko
The FSF address is subject to change, thus remove it from the file. While here, update a copyright line. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-13spi: dw-mid: remove redundant dmac memberAndy Shevchenko
Instead of using that member we prefer to use dma_dev which represents actual struct device of the DMA device. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-13spi: dw-mid: remove Moorestown supportAndy Shevchenko
The support of the Moorestown was removed [1] from kernel long time ago. This is just a follow up of that change. [1] http://www.spinics.net/lists/platform-driver-x86/msg02948.html Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-13spi: dw-mid: check that DMA was inited before exitAndy Shevchenko
If the driver was compiled with DMA support, but DMA channels weren't acquired by some reason, mid_spi_dma_exit() will crash the kernel. Fixes: 7063c0d942a1 (spi/dw_spi: add DMA support) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-13spi: dw: remove FSF addressAndy Shevchenko
There is no need to keep FSF address in the head of the file. While here, fix few typos in the header. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-12Merge tag 'stable/for-linus-3.17-b-rc4-arm-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen ARM bugfix from Stefano Stabellini: "The patches fix the "xen_add_mach_to_phys_entry: cannot add" bug that has been affecting xen on arm and arm64 guests since 3.16. They require a few hypervisor side changes that just went in xen-unstable. A couple of days ago David sent out a pull request with a few other Xen fixes (it is already in master). Sorry we didn't synchronized better among us" * tag 'stable/for-linus-3.17-b-rc4-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/arm: remove mach_to_phys rbtree xen/arm: reimplement xen_dma_unmap_page & friends xen/arm: introduce XENFEAT_grant_map_identity
2014-09-12drivers: net: b44: Fix typo in returning multicast statsMark Einon
nstat->multicast refers to received packets, not transmitted as is returned here. Change it so that received packet stats are given. Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12Merge tag 'master-2014-09-11' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-09-11 Please pull this batch of fixes intended for the 3.17 stream: For the mac80211 bits, Johannes says: "Two more fixes for mac80211 - one of them addresses a long-standing issue that we only found when using vendor events more frequently; the other addresses some bad information being reported in userspace that people were starting to actually look at." For the iwlwifi bits, Emmanuel says: "I re-enable scheduled scan on firmware that contain the fix for the bug that Linus reported. A few trivial fixes: endianity issues, the same DTIM period fix that I did in mac80211. Eyal fixes a few issues we identified with EAPOL, we now send them just as if they were management frames, this solves interrop issues. Johannes has another set of trivial fixes, while Luca fixes the way we configure the filters in the firmware. Last but not least, a new device is added by Oren." Emmanuel was traveling, resulting in his pull to be a bit larger than I would have liked to see at this point. FWIW, I have asked Emmanuel to be much more strict for any more pull requests in this cycle. In addition to the above, Sujith Manoharan reverts an earlier ath9k patch. The earlier change was found to allow for the device to sleep too long and miss beacons. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12Merge tag 'linux-can-fixes-for-3.17-20140911' of ↵David S. Miller
git://gitorious.org/linux-can/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2014-09-11 this is a pull request for the current release cycle of a single patch. The patch by David Jander fixes a scheduling while atomic problem in the flexcan driver, that was introduced by me in v3.14-rc6. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12ipv6: clean up anycast when an interface is destroyedSabrina Dubroca
If we try to rmmod the driver for an interface while sockets with setsockopt(JOIN_ANYCAST) are alive, some refcounts aren't cleaned up and we get stuck on: unregister_netdevice: waiting for ens3 to become free. Usage count = 1 If we LEAVE_ANYCAST/close everything before rmmod'ing, there is no problem. We need to perform a cleanup similar to the one for multicast in addrconf_ifdown(how == 1). Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12Merge branch 'arc_emac'David S. Miller
Beniamino Galvani says: ==================== net: arc_emac: fix tx issues the patches below solve some issues found in the tx ring reclaim strategy currently implemented in the arc_emac driver. Without these patches a simple outgoing UDP flow blocks almost immediately with the socket send buffer full, until some new rx packets trigger a clean of the tx ring. Everything seems to work fine on a Radxa Rock with this fix applied. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12net: arc_emac: prevent reuse of unreclaimed tx descriptorsBeniamino Galvani
This patch changes the logic in tx path to ensure that tx descriptors are reused for transmission only after they have been reclaimed by arc_emac_tx_clean(). Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12net: arc_emac: enable tx interruptsBeniamino Galvani
In the current implementation the cleaning of tx ring is done by the NAPI poll handler, which is scheduled after rx interrupts. Thus, in absence of received packets the reclaim of used tx buffers is never executed, blocking further transmission. This can be easily reproduced starting the transmission of a UDP flow with iperf, which blocks almost immediately because skbs are not returned to the stack and the socket send buffer becomes full. The patch enables tx interrupts so that the tx reclaim is scheduled after completed transmissions. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12alarmtimer: Lock k_itimer during timer callbackRichard Larocque
Locks the k_itimer's it_lock member when handling the alarm timer's expiry callback. The regular posix timers defined in posix-timers.c have this lock held during timout processing because their callbacks are routed through posix_timer_fn(). The alarm timers follow a different path, so they ought to grab the lock somewhere else. Cc: stable@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Sharvil Nanavati <sharvil@google.com> Signed-off-by: Richard Larocque <rlarocque@google.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-09-12alarmtimer: Do not signal SIGEV_NONE timersRichard Larocque
Avoids sending a signal to alarm timers created with sigev_notify set to SIGEV_NONE by checking for that special case in the timeout callback. The regular posix timers avoid sending signals to SIGEV_NONE timers by not scheduling any callbacks for them in the first place. Although it would be possible to do something similar for alarm timers, it's simpler to handle this as a special case in the timeout. Prior to this patch, the alarm timer would ignore the sigev_notify value and try to deliver signals to the process anyway. Even worse, the sanity check for the value of sigev_signo is skipped when SIGEV_NONE was specified, so the signal number could be bogus. If sigev_signo was an unitialized value (as it often would be if SIGEV_NONE is used), then it's hard to predict which signal will be sent. Cc: stable@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Sharvil Nanavati <sharvil@google.com> Signed-off-by: Richard Larocque <rlarocque@google.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-09-12alarmtimer: Return relative times in timer_gettimeRichard Larocque
Returns the time remaining for an alarm timer, rather than the time at which it is scheduled to expire. If the timer has already expired or it is not currently scheduled, the it_value's members are set to zero. This new behavior matches that of the other posix-timers and the POSIX specifications. This is a change in user-visible behavior, and may break existing applications. Hopefully, few users rely on the old incorrect behavior. Cc: stable@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Sharvil Nanavati <sharvil@google.com> Signed-off-by: Richard Larocque <rlarocque@google.com> [jstultz: minor style tweak] Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-09-12jiffies: Fix timeval conversion to jiffiesAndrew Hunter
timeval_to_jiffies tried to round a timeval up to an integral number of jiffies, but the logic for doing so was incorrect: intervals corresponding to exactly N jiffies would become N+1. This manifested itself particularly repeatedly stopping/starting an itimer: setitimer(ITIMER_PROF, &val, NULL); setitimer(ITIMER_PROF, NULL, &val); would add a full tick to val, _even if it was exactly representable in terms of jiffies_ (say, the result of a previous rounding.) Doing this repeatedly would cause unbounded growth in val. So fix the math. Here's what was wrong with the conversion: we essentially computed (eliding seconds) jiffies = usec * (NSEC_PER_USEC/TICK_NSEC) by using scaling arithmetic, which took the best approximation of NSEC_PER_USEC/TICK_NSEC with denominator of 2^USEC_JIFFIE_SC = x/(2^USEC_JIFFIE_SC), and computed: jiffies = (usec * x) >> USEC_JIFFIE_SC and rounded this calculation up in the intermediate form (since we can't necessarily exactly represent TICK_NSEC in usec.) But the scaling arithmetic is a (very slight) *over*approximation of the true value; that is, instead of dividing by (1 usec/ 1 jiffie), we effectively divided by (1 usec/1 jiffie)-epsilon (rounding down). This would normally be fine, but we want to round timeouts up, and we did so by adding 2^USEC_JIFFIE_SC - 1 before the shift; this would be fine if our division was exact, but dividing this by the slightly smaller factor was equivalent to adding just _over_ 1 to the final result (instead of just _under_ 1, as desired.) In particular, with HZ=1000, we consistently computed that 10000 usec was 11 jiffies; the same was true for any exact multiple of TICK_NSEC. We could possibly still round in the intermediate form, adding something less than 2^USEC_JIFFIE_SC - 1, but easier still is to convert usec->nsec, round in nanoseconds, and then convert using time*spec*_to_jiffies. This adds one constant multiplication, and is not observably slower in microbenchmarks on recent x86 hardware. Tested: the following program: int main() { struct itimerval zero = {{0, 0}, {0, 0}}; /* Initially set to 10 ms. */ struct itimerval initial = zero; initial.it_interval.tv_usec = 10000; setitimer(ITIMER_PROF, &initial, NULL); /* Save and restore several times. */ for (size_t i = 0; i < 10; ++i) { struct itimerval prev; setitimer(ITIMER_PROF, &zero, &prev); /* on old kernels, this goes up by TICK_USEC every iteration */ printf("previous value: %ld %ld %ld %ld\n", prev.it_interval.tv_sec, prev.it_interval.tv_usec, prev.it_value.tv_sec, prev.it_value.tv_usec); setitimer(ITIMER_PROF, &prev, NULL); } return 0; } Cc: stable@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Turner <pjt@google.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Reviewed-by: Paul Turner <pjt@google.com> Reported-by: Aaron Jacobs <jacobsa@google.com> Signed-off-by: Andrew Hunter <ahh@google.com> [jstultz: Tweaked to apply to 3.17-rc] Signed-off-by: John Stultz <john.stultz@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-15 09:26:39 +0000