summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-08-25io_uring: hand code io_accept() fd installingPavel Begunkov
Make io_accept() to handle file descriptor allocations and installation. A preparation patch for bypassing file tables. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/5b73d204caa0ce979ccb98136695b60f52a3d98c.1629888991.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-25io_uring: openat directly into fixed fd tablePavel Begunkov
Instead of opening a file into a process's file table as usual and then registering the fd within io_uring, some users may want to skip the first step and place it directly into io_uring's fixed file table. This patch adds such a capability for IORING_OP_OPENAT and IORING_OP_OPENAT2. The behaviour is controlled by setting sqe->file_index, where 0 implies the old behaviour using normal file tables. If non-zero value is specified, then it will behave as described and place the file into a fixed file slot sqe->file_index - 1. A file table should be already created, the slot should be valid and empty, otherwise the operation will fail. Keep the error codes consistent with IORING_OP_FILES_UPDATE, ENXIO and EINVAL on inappropriate fixed tables, and return EBADF on collision with already registered file. Note: IOSQE_FIXED_FILE can't be used to switch between modes, because accept takes a file, and it already uses the flag with a different meaning. Suggested-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/e9b33d1163286f51ea707f87d95bd596dada1e65.1629888991.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-25net: add accept helper not installing fdPavel Begunkov
Introduce and reuse a helper that acts similarly to __sys_accept4_file() but returns struct file instead of installing file descriptor. Will be used by io_uring. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Acked-by: David S. Miller <davem@davemloft.net> Link: https://lore.kernel.org/r/c57b9e8e818d93683a3d24f8ca50ca038d1da8c4.1629888991.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-25Partially revert "arm64/mm: drop HAVE_ARCH_PFN_VALID"Will Deacon
This partially reverts commit 16c9afc776608324ca71c0bc354987bab532f51d. Alex Bee reports a regression in 5.14 on their RK3328 SoC when configuring the PL330 DMA controller: | ------------[ cut here ]------------ | WARNING: CPU: 2 PID: 373 at kernel/dma/mapping.c:235 dma_map_resource+0x68/0xc0 | Modules linked in: spi_rockchip(+) fuse | CPU: 2 PID: 373 Comm: systemd-udevd Not tainted 5.14.0-rc7 #1 | Hardware name: Pine64 Rock64 (DT) | pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--) | pc : dma_map_resource+0x68/0xc0 | lr : pl330_prep_slave_fifo+0x78/0xd0 This appears to be because dma_map_resource() is being called for a physical address which does not correspond to a memory address yet does have a valid 'struct page' due to the way in which the vmemmap is constructed. Prior to 16c9afc77660 ("arm64/mm: drop HAVE_ARCH_PFN_VALID"), the arm64 implementation of pfn_valid() called memblock_is_memory() to return 'false' for such regions and the DMA mapping request would proceed. However, now that we are using the generic implementation where only the presence of the memory map entry is considered, we return 'true' and erroneously fail with DMA_MAPPING_ERROR because we identify the region as DRAM. Although fixing this in the DMA mapping code is arguably the right fix, it is a risky, cross-architecture change at this stage in the cycle. So just revert arm64 back to its old pfn_valid() implementation for v5.14. The change to the generic pfn_valid() code is preserved from the original patch, so as to avoid impacting other architectures. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Christoph Hellwig <hch@lst.de> Reported-by: Alex Bee <knaerzche@gmail.com> Link: https://lore.kernel.org/r/d3a3c828-b777-faf8-e901-904995688437@gmail.com Signed-off-by: Will Deacon <will@kernel.org>
2021-08-25net/sched: ets: fix crash when flipping from 'strict' to 'quantum'Davide Caratti
While running kselftests, Hangbin observed that sch_ets.sh often crashes, and splats like the following one are seen in the output of 'dmesg': BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 159f12067 P4D 159f12067 PUD 159f13067 PMD 0 Oops: 0000 [#1] SMP NOPTI CPU: 2 PID: 921 Comm: tc Not tainted 5.14.0-rc6+ #458 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:__list_del_entry_valid+0x2d/0x50 Code: 48 8b 57 08 48 b9 00 01 00 00 00 00 ad de 48 39 c8 0f 84 ac 6e 5b 00 48 b9 22 01 00 00 00 00 ad de 48 39 ca 0f 84 cf 6e 5b 00 <48> 8b 32 48 39 fe 0f 85 af 6e 5b 00 48 8b 50 08 48 39 f2 0f 85 94 RSP: 0018:ffffb2da005c3890 EFLAGS: 00010217 RAX: 0000000000000000 RBX: ffff9073ba23f800 RCX: dead000000000122 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff9073ba23fbc8 RBP: ffff9073ba23f890 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: dead000000000100 R13: ffff9073ba23fb00 R14: 0000000000000002 R15: 0000000000000002 FS: 00007f93e5564e40(0000) GS:ffff9073bba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000014ad34000 CR4: 0000000000350ee0 Call Trace: ets_qdisc_reset+0x6e/0x100 [sch_ets] qdisc_reset+0x49/0x1d0 tbf_reset+0x15/0x60 [sch_tbf] qdisc_reset+0x49/0x1d0 dev_reset_queue.constprop.42+0x2f/0x90 dev_deactivate_many+0x1d3/0x3d0 dev_deactivate+0x56/0x90 qdisc_graft+0x47e/0x5a0 tc_get_qdisc+0x1db/0x3e0 rtnetlink_rcv_msg+0x164/0x4c0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1a5/0x280 netlink_sendmsg+0x242/0x480 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1f2/0x260 ___sys_sendmsg+0x7c/0xc0 __sys_sendmsg+0x57/0xa0 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f93e44b8338 Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 43 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55 RSP: 002b:00007ffc0db737a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000061255c06 RCX: 00007f93e44b8338 RDX: 0000000000000000 RSI: 00007ffc0db73810 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 000000000000000b R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000687880 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: sch_ets sch_tbf dummy rfkill iTCO_wdt iTCO_vendor_support intel_rapl_msr intel_rapl_common joydev i2c_i801 pcspkr i2c_smbus lpc_ich virtio_balloon ip_tables xfs libcrc32c crct10dif_pclmul crc32_pclmul crc32c_intel ahci libahci ghash_clmulni_intel libata serio_raw virtio_blk virtio_console virtio_net net_failover failover sunrpc dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 When the change() function decreases the value of 'nstrict', we must take into account that packets might be already enqueued on a class that flips from 'strict' to 'quantum': otherwise that class will not be added to the bandwidth-sharing list. Then, a call to ets_qdisc_reset() will attempt to do list_del(&alist) with 'alist' filled with zero, hence the NULL pointer dereference. For classes flipping from 'strict' to 'quantum', initialize an empty list and eventually add it to the bandwidth-sharing list, if there are packets already enqueued. In this way, the kernel will: a) prevent crashing as described above. b) avoid retaining the backlog packets (for an arbitrarily long time) in case no packet is enqueued after a change from 'strict' to 'quantum'. Reported-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: dcc68b4d8084 ("net: sch_ets: Add a new Qdisc") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25qede: Fix memset corruptionShai Malin
Thanks to Kees Cook who detected the problem of memset that starting from not the first member, but sized for the whole struct. The better change will be to remove the redundant memset and to clear only the msix_cnt member. Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Reported-by: Kees Cook <keescook@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25net: stmmac: fix kernel panic due to NULL pointer dereference of buf->xdpSong Yoong Siang
Ensure a valid XSK buffer before proceed to free the xdp buffer. The following kernel panic is observed without this patch: RIP: 0010:xp_free+0x5/0x40 Call Trace: stmmac_napi_poll_rxtx+0x332/0xb30 [stmmac] ? stmmac_tx_timer+0x3c/0xb0 [stmmac] net_rx_action+0x13d/0x3d0 __do_softirq+0xfc/0x2fb ? smpboot_register_percpu_thread+0xe0/0xe0 run_ksoftirqd+0x32/0x70 smpboot_thread_fn+0x1d8/0x2c0 kthread+0x169/0x1a0 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30 ---[ end trace 0000000000000002 ]--- Fixes: bba2556efad6 ("net: stmmac: Enable RX via AF_XDP zero-copy") Cc: <stable@vger.kernel.org> # 5.13.x Suggested-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25net: stmmac: fix kernel panic due to NULL pointer dereference of xsk_poolSong Yoong Siang
After free xsk_pool, there is possibility that napi polling is still running in the middle, thus causes a kernel crash due to kernel NULL pointer dereference of rx_q->xsk_pool and tx_q->xsk_pool. Fix this by changing the XDP pool setup sequence to: 1. disable napi before free xsk_pool 2. enable napi after init xsk_pool The following kernel panic is observed without this patch: RIP: 0010:xsk_uses_need_wakeup+0x5/0x10 Call Trace: stmmac_napi_poll_rxtx+0x3a9/0xae0 [stmmac] __napi_poll+0x27/0x130 net_rx_action+0x233/0x280 __do_softirq+0xe2/0x2b6 run_ksoftirqd+0x1a/0x20 smpboot_thread_fn+0xac/0x140 ? sort_range+0x20/0x20 kthread+0x124/0x150 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 ---[ end trace a77c8956b79ac107 ]--- Fixes: bba2556efad6 ("net: stmmac: Enable RX via AF_XDP zero-copy") Cc: <stable@vger.kernel.org> # 5.13.x Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25x86/build: Move the install rule to arch/x86/MakefileMasahiro Yamada
Currently, the install target in arch/x86/Makefile descends into arch/x86/boot/Makefile to invoke the shell script, but there is no good reason to do so. arch/x86/Makefile can run the shell script directly. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20210729140023.442101-2-masahiroy@kernel.org
2021-08-25x86/build: Remove the left-over bzlilo targetMasahiro Yamada
Commit f279b49f13bd ("x86/boot: Modernize genimage script; hdimage+EFI support") removed the bzlilo target from arch/x86/boot/Makefile. Remove the left-over from arch/x86/Makefile. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20210729140023.442101-1-masahiroy@kernel.org
2021-08-25net: macb: Add a NULL check on desc_ptpHarini Katakam
macb_ptp_desc will not return NULL under most circumstances with correct Kconfig and IP design config register. But for the sake of the extreme corner case, check for NULL when using the helper. In case of rx_tstamp, no action is necessary except to return (similar to timestamp disabled) and warn. In case of TX, return -EINVAL to let the skb be free. Perform this check before marking skb in progress. Fixes coverity warning: (4) Event dereference: Dereferencing a null pointer "desc_ptp" Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25net: stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warningsMichael Riesch
This reverts commit 2c896fb02e7f65299646f295a007bda043e0f382 "net: stmmac: dwmac-rk: add pd_gmac support for rk3399" and fixes unbalanced pm_runtime_enable warnings. In the commit to be reverted, support for power management was introduced to the Rockchip glue code. Later, power management support was introduced to the stmmac core code, resulting in multiple invocations of pm_runtime_{enable,disable,get_sync,put_sync}. The multiple invocations happen in rk_gmac_powerup and stmmac_{dvr_probe, resume} as well as in rk_gmac_powerdown and stmmac_{dvr_remove, suspend}, respectively, which are always called in conjunction. Fixes: 5ec55823438e850c91c6b92aec93fb04ebde29e2 ("net: stmmac: add clocks management for gmac driver") Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25KVM: s390: generate kvm hypercall functionsHeiko Carstens
Generate kvm hypercall functions with a macro instead of duplicating the more or less identical code seven times. This also reduces number of lines of code. However the main purpose is to get rid of as many as possible open coded error prone register asm constructs in s390 architecture code. For the only user of kvm_hypercall identical code is created before/after this patch (drivers/s390/virtio/virtio_ccw.c). Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Link: https://lore.kernel.org/r/20210713145713.2815167-1-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/sclp: add tracing of SCLP interactionsPeter Oberparleiter
Add tracing of interactions between the SCLP base driver, firmware and other drivers to support problem determination in case of SCLP-related issues. For that purpose this patch introduces two new s390dbf debug areas: - sclp: An abbreviated log of all common interactions - sclp_err: A full log of failed or abnormal interactions Tracing of full SCCB contents can be enabled for the sclp area by setting its debug level to maximum (6). Overview of added trace events: * Firmware interaction: - SRV1: Service call about to be issued - SRV2: Service call was issued - INT: Interrupt received * Driver interaction: - RQAD: Request was added - RQOK: Request success - RQAB: Request aborted - RQTM: Request timed out - REG: Event listener registered - UREG: Event listener unregistered - EVNT: Event callback - STCG: State-change callback * Abnormal events: - TMO: A timeout occurred - UNEX: Unexpected SCCB completion * Other (not traced at default level): - SYN1: Synchronous wait start - SYN2: Synchronous wait end Since the SCLP interface is used by console drivers this patch also moves s390dbf printks outside the critical section protected by debug area locks to prevent a potential deadlock that would otherwise be introduced between console_owner --> sclp_lock --> sclp_debug.lock. Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/debug: add early tracing supportPeter Oberparleiter
Debug areas can currently only be used after s390dbf initialization which occurs as a postcore_initcall. This is too late for tracing earlier code such as that related to console_init(). This patch introduces a macro for defining a statically initialized debug area that can be used to trace very early code. The macro is made available for built-in code only because modules are never running during early boot. Example usage: 1. Define static debug area: DEFINE_STATIC_DEBUG_INFO(my_debug, "my_debug", 4, 1, 16, &debug_hex_ascii_view); 2. Add trace entry: debug_event(&my_debug, 0, "DATA", 4); Note: The debug area is automatically registered in debugfs during boot. A driver must not call any of the debug_register()/_unregister() functions on a static debug_info_t! Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/debug: fix debug area life cyclePeter Oberparleiter
Currently allocation and registration of s390dbf debug areas are tied together. As a result, a debug area cannot be unregistered and re-registered while any process has an associated debugfs file open. Fix this by splitting alloc/release from register/unregister. Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/debug: keep debug data on resizePeter Oberparleiter
Any previously recorded s390dbf debug data is reset when a debug area is resized using the 'pages' sysfs attribute. This can make live-debugging unnecessarily complex. Fix this by copying existing debug data to the newly allocated debug area when resizing. Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/diag: make restart_part2 a local labelHeiko Carstens
Avoid that the "restart_part2" label, which is in the middle of a function, appears in /proc/kallsyms. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/mm,pageattr: fix walk_pte_level() early exitHeiko Carstens
In case of splitting to 4k mapping the early exit in walk_pte_level() must only be taken iff flags is equal to SET_MEMORY_4K. Currently the early exit is taken if the flag is set, and also others might be set. This may lead to the situation that a mapping is split but other changes are not done, like e.g. setting pages to R/W. There is currently no such caller, but there might be in the future. Fixes: b3e1a00c8fa4 ("s390/mm: implement set_memory_4k()") Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390: fix typo in linker scriptHeiko Carstens
Rename amod31 to amode31 like it was supposed to be. Fixes: c78d0c7484f0 ("s390: rename dma section to amode31") Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390: remove do_signal() prototype and do_notify_resume() functionSven Schnelle
Both are no longer used since the conversion to generic entry, therefore remove them. Fixes: 56e62a737028 ("s390: convert to generic entry") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/crypto: fix all kernel-doc warnings in vfio_ap_ops.cRandy Dunlap
The 0day bot reported some kernel-doc warnings in this file so clean up all of the kernel-doc and use proper kernel-doc formatting. There are no more kernel-doc errors or warnings reported in this file. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Tony Krowiak <akrowiak@linux.ibm.com> Cc: Halil Pasic <pasic@linux.ibm.com> Cc: Jason Herne <jjherne@linux.ibm.com> Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: linux-s390@vger.kernel.org Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Link: https://lore.kernel.org/r/20210806050149.9614-1-rdunlap@infradead.org Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/pci: improve DMA translation init and exitNiklas Schnelle
Currently zpci_dma_init_device()/zpci_dma_exit_device() is called as part of zpci_enable_device()/zpci_disable_device() and errors for zpci_dma_exit_device() are always ignored even if we could abort. Improve upon this by moving zpci_dma_exit_device() out of zpci_disable_device() and check for errors whenever we have a way to abort the current operation. Note that for example in zpci_event_hard_deconfigured() the device is expected to be gone so we really can't abort and proceed even in case of error. Similarly move the cc == 3 special case out of zpci_unregister_ioat() and into the callers allowing to abort when finding an already disabled devices precludes proceeding with the operation. While we are at it log IOAT register/unregister errors in the s390 debugfs log, Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/pci: simplify CLP List PCI handlingNiklas Schnelle
Currently clp_get_state() and clp_refresh_fh() awkwardly use the clp_list_pci() callback mechanism to find the entry for a specific FID and update its zdev, respectively return its state. This is both needlessly complex and means we are always going through the entire PCI function list even if the FID has already been found. Instead lets introduce a clp_find_pci() function to find a specific entry and share the CLP List PCI request handling code with clp_list_pci(). With that in place we can also easily make the function handle a simple out parameter instead of directly altering the zdev allowing easier access to the updated function handle by the caller. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/pci: handle FH state mismatch only on disableNiklas Schnelle
Instead of always treating CLP_RC_SETPCIFN_ALRDY as success and blindly updating the function handle restrict this special handling to the disable case by moving it into zpci_disable_device() and still treating it as an error while also updating the function handle such that a subsequent zpci_disable_device() succeeds or the caller can ignore the error when aborting is not an option such as for zPCI event 0x304. Also print this occurrence to the log such that an admin can tell why a disable operation returned an error. A mismatch between the state of the underlying device and our view of it can naturally happen when the device suddenly enters the error state but we haven't gotten the error notification yet, it must not happen on enable though. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/pci: fix misleading rc in clp_set_pci_fn()Niklas Schnelle
Currently clp_set_pci_fn() always returns 0 as long as the CLP request itself succeeds even if the operation itself returns a response code other than CLP_RC_OK or CLP_RC_SETPCIFN_ALRDY. This is highly misleading because calling code assumes that a zero rc means that the operation was successful. Fix this by returning the response code or cc on failure with the exception of the special handling for CLP_RC_SETPCIFN_ALRDY. Also let's not assume that the returned function handle for CLP_RC_SETPCIFN_ALRDY is 0, we don't need it anyway. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/boot: factor out offset_vmlinux_info() functionAlexander Gordeev
Move offsetting all of vmlinux_info fields to a separate function for better readability. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/kasan: fix large PMD pages address alignment checkAlexander Gordeev
It is currently possible to initialize a large PMD page when the address is not aligned on page boundary. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/zcrypt: remove gratuitious NULL check in .remove() callbacksJulian Wiedmann
As .remove() is only called after a successful .probe() call, we can trust that the drvdata is valid. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/ap: use the common driver-data pointerJulian Wiedmann
The device struct provides a pointer for driver-private data. Use this in the zcrypt drivers (as vfio_ap already does), and then remove the custom pointer from the AP device structs. As really_probe() will always clear the drvdata pointer on error, we no longer have to do so ourselves. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/ap: use the common device_driver pointerJulian Wiedmann
The device struct itself already contains a pointer to its driver. Use this consistently, instead of duplicating it. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/pci: reset zdev->zbus on registration failureNiklas Schnelle
On failure to register a struct zpci_dev with a struct zpci_bus we left a dangling pointer in zdev->zbus. As zpci_create_device() bails if zpci_bus_device_register() fails this is of no consequence but still bad practice. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/pci: cleanup resources only if necessaryNiklas Schnelle
It's currently safe to call zpci_cleanup_bus_resources() even if the resources were never created but it makes no sense so check zdev->has_resources before we call zpci_cleanup_bus_resources() in zpci_release_device(). Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25Revert "USB: serial: ch341: fix character loss at high transfer rates"Johan Hovold
This reverts commit 3c18e9baee0ef97510dcda78c82285f52626764b. These devices do not appear to send a zero-length packet when the transfer size is a multiple of the bulk-endpoint max-packet size. This means that incoming data may not be processed by the driver until a short packet is received or the receive buffer is full. Revert back to using endpoint-sized receive buffers to avoid stalled reads. Reported-by: Paul Größel <pb.g@gmx.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=214131 Fixes: 3c18e9baee0e ("USB: serial: ch341: fix character loss at high transfer rates") Cc: stable@vger.kernel.org Cc: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/r/20210824121926.19311-1-johan@kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2021-08-24riscv: dts: microchip: Add ethernet0 to the aliases nodeBin Meng
U-Boot expects this alias to be in place in order to fix up the mac address of the ethernet node. Note on the Icicle Kit board, currently only emac1 is enabled so it becomes the 'ethernet0'. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-08-24riscv: dts: microchip: Use 'local-mac-address' for emac1Bin Meng
Per the DT spec, 'local-mac-address' is used to specify MAC address that was assigned to the network device, while 'mac-address' is used to specify the MAC address that was last used by the boot program, and shall be used only if the value differs from 'local-mac-address' property value. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: conor dooley <conor.dooley@microchip.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-08-24riscv: Ensure the value of FP registers in the core dump file is up to dateVincent Chen
The value of FP registers in the core dump file comes from the thread.fstate. However, kernel saves the FP registers to the thread.fstate only before scheduling out the process. If no process switch happens during the exception handling process, kernel will not have a chance to save the latest value of FP registers to thread.fstate. It will cause the value of FP registers in the core dump file may be incorrect. To solve this problem, this patch force lets kernel save the FP register into the thread.fstate if the target task_struct equals the current. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Fixes: b8c8a9590e4f ("RISC-V: Add FP register ptrace support for gdb.") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-08-24scsi: core: Fix hang of freezing queue between blocking and running deviceLi Jinlin
We found a hang, the steps to reproduce are as follows: 1. blocking device via scsi_device_set_state() 2. dd if=/dev/sda of=/mnt/t.log bs=1M count=10 3. echo none > /sys/block/sda/queue/scheduler 4. echo "running" >/sys/block/sda/device/state Step 3 and 4 should complete after step 4, but they hang. CPU#0 CPU#1 CPU#2 --------------- ---------------- ---------------- Step 1: blocking device Step 2: dd xxxx ^^^^^^ get request q_usage_counter++ Step 3: switching scheculer elv_iosched_store elevator_switch blk_mq_freeze_queue blk_freeze_queue > blk_freeze_queue_start ^^^^^^ mq_freeze_depth++ > blk_mq_run_hw_queues ^^^^^^ can't run queue when dev blocked > blk_mq_freeze_queue_wait ^^^^^^ Hang here!!! wait q_usage_counter==0 Step 4: running device store_state_field scsi_rescan_device scsi_attach_vpd scsi_vpd_inquiry __scsi_execute blk_get_request blk_mq_alloc_request blk_queue_enter ^^^^^^ Hang here!!! wait mq_freeze_depth==0 blk_mq_run_hw_queues ^^^^^^ dispatch IO, q_usage_counter will reduce to zero blk_mq_unfreeze_queue ^^^^^ mq_freeze_depth-- To fix this, we need to run queue before rescanning device when the device state changes to SDEV_RUNNING. Link: https://lore.kernel.org/r/20210824025921.3277629-1-lijinlin3@huawei.com Fixes: f0f82e2476f6 ("scsi: core: Fix capacity set to zero after offlinining device") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Li Jinlin <lijinlin3@huawei.com> Signed-off-by: Qiu Laibin <qiulaibin@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24net: phy: mediatek: add the missing suspend/resume callbacksDENG Qingfang
Without suspend/resume callbacks, the PHY cannot be powered down/up administratively. Fixes: e40d2cca0189 ("net: phy: add MediaTek Gigabit Ethernet PHY driver") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210823044422.164184-1-dqfext@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24mq-deadline: Fix request accountingBart Van Assche
The block layer may call the I/O scheduler .finish_request() callback without having called the .insert_requests() callback. Make sure that the mq-deadline I/O statistics are correct if the block layer inserts an I/O request that bypasses the I/O scheduler. This patch prevents that lower priority I/O is delayed longer than necessary for mixed I/O priority workloads. Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com> Fixes: 08a9ad8bf607 ("block/mq-deadline: Add cgroup support") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210824170520.1659173-1-bvanassche@acm.org Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-24spi: davinci: invoke chipselect callbackMatija Glavinic Pecotic
Davinci needs to configure chipselect on transfer. Fixes: 4a07b8bcd503 ("spi: bitbang: Make chipselect callback optional") Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Link: https://lore.kernel.org/r/735fb7b0-82aa-5b9b-85e4-53f0c348cc0e@nokia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-24spi: sprd: fill offset only to RD_CMD register for reading from slave deviceChunyan Zhang
RD_CMD can accept slave address offset only, higher bits are reserved. Writing the whole slave address including slave base seems unnecessary. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20210824070212.2089255-3-zhang.lyra@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-24spi: sprd: Make sure offset not equal to slave address sizeChunyan Zhang
The slave register offset shouldn't equal to the max slave address which ADI can support to access. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20210824070212.2089255-2-zhang.lyra@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-24spi: sprd: Pass offset instead of physical address to adi_read/_write()Chunyan Zhang
The register offset would be added a physical address base and then pass to the function sprd_adt_read()/_write() each time before calling them. So we can do that within these two functions instead, that would make the code more clear. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20210824070212.2089255-1-zhang.lyra@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "Several small fixes, the first three are significant: - mlx5 crash unloading drivers with a rare HW config - missing userspace reporting for the new dmabuf objects - random rxe failure due to missing memory zeroing - static checker/etc reports: missing spin lock init, null pointer deref on error, extra unlock on error path, memory allocation under spinlock, missing IRQ vector cleanup - kconfig typo in the new irdma driver" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/rxe: Zero out index member of struct rxe_queue RDMA/efa: Free IRQ vectors on error flow RDMA/rxe: Fix memory allocation while in a spin lock RDMA/bnxt_re: Remove unpaired rtnl unlock in bnxt_re_dev_init() IB/hfi1: Fix possible null-pointer dereference in _extend_sdma_tx_descs() RDMA/irdma: Use correct kconfig symbol for AUXILIARY_BUS RDMA/bnxt_re: Add missing spin lock initialization RDMA/uverbs: Track dmabuf memory regions RDMA/mlx5: Fix crash when unbind multiport slave
2021-08-24blk-zoned: allow BLKREPORTZONE without CAP_SYS_ADMINNiklas Cassel
A user space process should not need the CAP_SYS_ADMIN capability set in order to perform a BLKREPORTZONE ioctl. Getting the zone report is required in order to get the write pointer. Neither read() nor write() requires CAP_SYS_ADMIN, so it is reasonable that a user space process that can read/write from/to the device, also can get the write pointer. (Since e.g. writes have to be at the write pointer.) Fixes: 3ed05a987e0f ("blk-zoned: implement ioctls") Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Aravind Ramesh <aravind.ramesh@wdc.com> Reviewed-by: Adam Manzanares <a.manzanares@samsung.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: stable@vger.kernel.org # v4.10+ Link: https://lore.kernel.org/r/20210811110505.29649-3-Niklas.Cassel@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-24blk-zoned: allow zone management send operations without CAP_SYS_ADMINNiklas Cassel
Zone management send operations (BLKRESETZONE, BLKOPENZONE, BLKCLOSEZONE and BLKFINISHZONE) should be allowed under the same permissions as write(). (write() does not require CAP_SYS_ADMIN). Additionally, other ioctls like BLKSECDISCARD and BLKZEROOUT only check if the fd was successfully opened with FMODE_WRITE. (They do not require CAP_SYS_ADMIN). Currently, zone management send operations require both CAP_SYS_ADMIN and that the fd was successfully opened with FMODE_WRITE. Remove the CAP_SYS_ADMIN requirement, so that zone management send operations match the access control requirement of write(), BLKSECDISCARD and BLKZEROOUT. Fixes: 3ed05a987e0f ("blk-zoned: implement ioctls") Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Aravind Ramesh <aravind.ramesh@wdc.com> Reviewed-by: Adam Manzanares <a.manzanares@samsung.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: stable@vger.kernel.org # v4.10+ Link: https://lore.kernel.org/r/20210811110505.29649-2-Niklas.Cassel@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-24include:libata: fix boolreturn.cocci warningsJing Yangyang
./include/linux/libata.h:1462:8-9:WARNING: return of 0/1 in function 'ata_is_host_link' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Jing Yangyang <jing.yangyang@zte.com.cn> Link: https://lore.kernel.org/r/20210824060702.59006-1-deng.changcheng@zte.com.cn Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-24block: mark blkdev_fsync staticChristoph Hellwig
blkdev_fsync is only used inside of block_dev.c since the removal of the raw drіver. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210824151823.1575100-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-24block: refine the disk_live check in del_gendiskChristoph Hellwig
hidden gendisks will never be marked live. Fixes: 40b3a52ffc5b ("block: add a sanity check for a live disk in del_gendisk") Reported-by: Bruno Goncalves <bgoncalv@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210824144310.1487816-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-12 12:28:46 +0000