summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-08-24mmc: sdhci-tegra: Enable MMC_CAP2_ALT_GPT_TEGRADmitry Osipenko
Tegra20/30/114/124 Android devices place GPT at a non-standard location. Enable GPT entry scanning at that location. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20210820004536.15791-5-digetx@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-24mmc: block: Support alternative_gpt_sector() operationDmitry Osipenko
Support generic alternative_gpt_sector() block device operation. It calculates location of GPT entry for eMMC of NVIDIA Tegra Android devices. Add new MMC_CAP2_ALT_GPT_TEGRA flag that enables scanning of alternative GPT sector and add raw_boot_mult field to mmc_ext_csd which allows to get size of the boot partitions that is needed for the calculation. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20210820004536.15791-4-digetx@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-24partitions/efi: Support non-standard GPT locationDmitry Osipenko
Support looking up GPT at a non-standard location specified by a block device driver. Acked-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20210820004536.15791-3-digetx@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-24block: Add alternative_gpt_sector() operationDmitry Osipenko
Add alternative_gpt_sector() block device operation which specifies alternative location of a GPT entry. This allows us to support Android devices that have GPT entry at a non-standard location and can't be repartitioned easily. Reviewed-by: Christoph Hellwig <hch@lst.de> Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20210820004536.15791-2-digetx@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-24drm/amdgpu: Fix build with missing pm_suspend_target_state module exportBorislav Petkov
Building a randconfig here triggered: ERROR: modpost: "pm_suspend_target_state" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! because the module export of that symbol happens in kernel/power/suspend.c which is enabled with CONFIG_SUSPEND. The ifdef guards in amdgpu_acpi_is_s0ix_supported(), however, test for CONFIG_PM_SLEEP which is defined like this: config PM_SLEEP def_bool y depends on SUSPEND || HIBERNATE_CALLBACKS and that randconfig has: # CONFIG_SUSPEND is not set CONFIG_HIBERNATE_CALLBACKS=y leading to the module export missing. Change the ifdeffery to depend directly on CONFIG_SUSPEND. Fixes: 5706cb3c910c ("drm/amdgpu: fix checking pmops when PM_SLEEP is not enabled") Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/YSP6Lv53QV0cOAsd@zn.tnic Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-08-24bio: fix page leak bio_add_hw_page failurePavel Begunkov
__bio_iov_append_get_pages() doesn't put not appended pages on bio_add_hw_page() failure, so potentially leaking them, fix it. Also, do the same for __bio_iov_iter_get_pages(), even though it looks like it can't be triggered by userspace in this case. Fixes: 0512a75b98f8 ("block: Introduce REQ_OP_ZONE_APPEND") Cc: stable@vger.kernel.org # 5.8+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/1edfa6a2ffd66d55e6345a477df5387d2c1415d0.1626653825.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-24USB: serial: option: add new VID/PID to support Fibocom FG150Zhengjun Zhang
Fibocom FG150 is a 5G module based on Qualcomm SDX55 platform, support Sub-6G band. Here are the outputs of lsusb -v and usb-devices: > T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 > D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 > P: Vendor=2cb7 ProdID=010b Rev=04.14 > S: Manufacturer=Fibocom > S: Product=Fibocom Modem_SN:XXXXXXXX > S: SerialNumber=XXXXXXXX > C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA > I: If#=0x0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host > I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host > I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) > I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) > Bus 002 Device 002: ID 2cb7:010b Fibocom Fibocom Modem_SN:XXXXXXXX > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 3.20 > bDeviceClass 0 > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 9 > idVendor 0x2cb7 Fibocom > idProduct 0x010b > bcdDevice 4.14 > iManufacturer 1 Fibocom > iProduct 2 Fibocom Modem_SN:XXXXXXXX > iSerial 3 XXXXXXXX > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 0x00e6 > bNumInterfaces 5 > bConfigurationValue 1 > iConfiguration 4 RNDIS_DUN_DIAG_ADB > bmAttributes 0xa0 > (Bus Powered) > Remote Wakeup > MaxPower 896mA > Interface Association: > bLength 8 > bDescriptorType 11 > bFirstInterface 0 > bInterfaceCount 2 > bFunctionClass 239 Miscellaneous Device > bFunctionSubClass 4 > bFunctionProtocol 1 > iFunction 7 RNDIS > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 239 Miscellaneous Device > bInterfaceSubClass 4 > bInterfaceProtocol 1 > iInterface 0 > ** UNRECOGNIZED: 05 24 00 10 01 > ** UNRECOGNIZED: 05 24 01 00 01 > ** UNRECOGNIZED: 04 24 02 00 > ** UNRECOGNIZED: 05 24 06 00 01 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0008 1x 8 bytes > bInterval 9 > bMaxBurst 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 1 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 10 CDC Data > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x8e EP 14 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 6 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x0f EP 15 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 6 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 2 > bAlternateSetting 0 > bNumEndpoints 3 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > ** UNRECOGNIZED: 05 24 00 10 01 > ** UNRECOGNIZED: 05 24 01 00 00 > ** UNRECOGNIZED: 04 24 02 02 > ** UNRECOGNIZED: 05 24 06 00 00 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x83 EP 3 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x000a 1x 10 bytes > bInterval 9 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x82 EP 2 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x01 EP 1 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 3 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 255 Vendor Specific Subclass > bInterfaceProtocol 48 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x84 EP 4 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 EP 2 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 4 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 66 > bInterfaceProtocol 1 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x03 EP 3 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x85 EP 5 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Binary Object Store Descriptor: > bLength 5 > bDescriptorType 15 > wTotalLength 0x0016 > bNumDeviceCaps 2 > USB 2.0 Extension Device Capability: > bLength 7 > bDescriptorType 16 > bDevCapabilityType 2 > bmAttributes 0x00000006 > BESL Link Power Management (LPM) Supported > SuperSpeed USB Device Capability: > bLength 10 > bDescriptorType 16 > bDevCapabilityType 3 > bmAttributes 0x00 > wSpeedsSupported 0x000f > Device can operate at Low Speed (1Mbps) > Device can operate at Full Speed (12Mbps) > Device can operate at High Speed (480Mbps) > Device can operate at SuperSpeed (5Gbps) > bFunctionalitySupport 1 > Lowest fully-functional device speed is Full Speed (12Mbps) > bU1DevExitLat 1 micro seconds > bU2DevExitLat 500 micro seconds > Device Status: 0x0000 > (Bus Powered) Signed-off-by: Zhengjun Zhang <zhangzhengjun@aicrobo.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2021-08-24block: remove CONFIG_DEBUG_BLOCK_EXT_DEVTChristoph Hellwig
This might have been a neat debug aid when the extended dev_t was added, but that time is long gone. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210824075216.1179406-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-24block: remove a pointless call to MINOR() in device_add_diskChristoph Hellwig
blk_alloc_ext_minor already returns just a minor number, so no need to mask the high bits. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210824075216.1179406-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-24fs: clean up after mandatory file locking support removalLukas Bulwahn
Commit 3efee0567b4a ("fs: remove mandatory file locking support") removes some operations in functions rw_verify_area(). As these functions are now simplified, do some syntactic clean-up as follow-up to the removal as well, which was pointed out by compiler warnings and static analysis. No functional change. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Jeff Layton <jlayton@kernel.org>
2021-08-24net: dsa: mv88e6xxx: Update mv88e6393x serdes errataNathan Rossi
In early erratas this issue only covered port 0 when changing from [x]MII (rev A 3.6). In subsequent errata versions this errata changed to cover the additional "Hardware reset in CPU managed mode" condition, and removed the note specifying that it only applied to port 0. In designs where the device is configured with CPU managed mode (CPU_MGD), on reset all SERDES ports (p0, p9, p10) have a stuck power down bit and require this initial power up procedure. As such apply this errata to all three SERDES ports of the mv88e6393x. Signed-off-by: Nathan Rossi <nathan.rossi@digi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24ipv6: correct comments about fib6_node sernumzhang kai
correct comments in set and get fn_sernum Signed-off-by: zhang kai <zhangkaiheb@126.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24x86/kaslr: Have process_mem_region() return a booleanJing Yangyang
Fix the following coccicheck warning: ./arch/x86/boot/compressed/kaslr.c:671:10-11:WARNING:return of 0/1 in function 'process_mem_region' with return type bool Generated by: scripts/coccinelle/misc/boolreturn.cocci Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Jing Yangyang <jing.yangyang@zte.com.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20210824070515.61065-1-deng.changcheng@zte.com.cn
2021-08-24x86/mce: Defer processing of early errorsBorislav Petkov
When a fatal machine check results in a system reset, Linux does not clear the error(s) from machine check bank(s) - hardware preserves the machine check banks across a warm reset. During initialization of the kernel after the reboot, Linux reads, logs, and clears all machine check banks. But there is a problem. In: 5de97c9f6d85 ("x86/mce: Factor out and deprecate the /dev/mcelog driver") the call to mce_register_decode_chain() moved later in the boot sequence. This means that /dev/mcelog doesn't see those early error logs. This was partially fixed by: cd9c57cad3fe ("x86/MCE: Dump MCE to dmesg if no consumers") which made sure that the logs were not lost completely by printing to the console. But parsing console logs is error prone. Users of /dev/mcelog should expect to find any early errors logged to standard places. Add a new flag MCP_QUEUE_LOG to machine_check_poll() to be used in early machine check initialization to indicate that any errors found should just be queued to genpool. When mcheck_late_init() is called it will call mce_schedule_work() to actually log and flush any errors queued in the genpool. [ Based on an original patch, commit message by and completely productized by Tony Luck. ] Fixes: 5de97c9f6d85 ("x86/mce: Factor out and deprecate the /dev/mcelog driver") Reported-by: Sumanth Kamatala <skamatala@juniper.net> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20210824003129.GA1642753@agluck-desk2.amr.corp.intel.com
2021-08-24qed: Fix the VF msix vectors flowShai Malin
For VFs we should return with an error in case we didn't get the exact number of msix vectors as we requested. Not doing that will lead to a crash when starting queues for this VF. Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24platform-msi: Add ABI to show msi_irqs of platform devicesBarry Song
PCI devices expose the associated MSI interrupts via sysfs, but platform devices which utilize MSI interrupts do not. This information is important for user space tools to optimize affinity settings. Utilize the generic MSI sysfs facility to expose this information for platform MSI. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210813035628.6844-3-21cnbao@gmail.com
2021-08-24genirq/msi: Move MSI sysfs handling from PCI to MSI coreBarry Song
Move PCI's MSI sysfs code to the irq core so that other busses such as platform can reuse it. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210813035628.6844-2-21cnbao@gmail.com
2021-08-24genirq/cpuhotplug: Demote debug printk to KERN_DEBUGLee Jones
This sort of information is only generally useful when debugging. No need to have these sprinkled through the kernel log otherwise. Real world problem: During pre-release testing these have an affect on performance on real products. To the point where so much logging builds up, that it sets off the watchdog(s) on some high profile consumer devices. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210816134817.1503661-1-lee.jones@linaro.org
2021-08-23ucounts: Increase ucounts reference counter before the security hookAlexey Gladkov
We need to increment the ucounts reference counter befor security_prepare_creds() because this function may fail and abort_creds() will try to decrement this reference. [ 96.465056][ T8641] FAULT_INJECTION: forcing a failure. [ 96.465056][ T8641] name fail_page_alloc, interval 1, probability 0, space 0, times 0 [ 96.478453][ T8641] CPU: 1 PID: 8641 Comm: syz-executor668 Not tainted 5.14.0-rc6-syzkaller #0 [ 96.487215][ T8641] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ 96.497254][ T8641] Call Trace: [ 96.500517][ T8641] dump_stack_lvl+0x1d3/0x29f [ 96.505758][ T8641] ? show_regs_print_info+0x12/0x12 [ 96.510944][ T8641] ? log_buf_vmcoreinfo_setup+0x498/0x498 [ 96.516652][ T8641] should_fail+0x384/0x4b0 [ 96.521141][ T8641] prepare_alloc_pages+0x1d1/0x5a0 [ 96.526236][ T8641] __alloc_pages+0x14d/0x5f0 [ 96.530808][ T8641] ? __rmqueue_pcplist+0x2030/0x2030 [ 96.536073][ T8641] ? lockdep_hardirqs_on_prepare+0x3e2/0x750 [ 96.542056][ T8641] ? alloc_pages+0x3f3/0x500 [ 96.546635][ T8641] allocate_slab+0xf1/0x540 [ 96.551120][ T8641] ___slab_alloc+0x1cf/0x350 [ 96.555689][ T8641] ? kzalloc+0x1d/0x30 [ 96.559740][ T8641] __kmalloc+0x2e7/0x390 [ 96.563980][ T8641] ? kzalloc+0x1d/0x30 [ 96.568029][ T8641] kzalloc+0x1d/0x30 [ 96.571903][ T8641] security_prepare_creds+0x46/0x220 [ 96.577174][ T8641] prepare_creds+0x411/0x640 [ 96.581747][ T8641] __sys_setfsuid+0xe2/0x3a0 [ 96.586333][ T8641] do_syscall_64+0x3d/0xb0 [ 96.590739][ T8641] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 96.596611][ T8641] RIP: 0033:0x445a69 [ 96.600483][ T8641] Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 11 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 [ 96.620152][ T8641] RSP: 002b:00007f1054173318 EFLAGS: 00000246 ORIG_RAX: 000000000000007a [ 96.628543][ T8641] RAX: ffffffffffffffda RBX: 00000000004ca4c8 RCX: 0000000000445a69 [ 96.636600][ T8641] RDX: 0000000000000010 RSI: 00007f10541732f0 RDI: 0000000000000000 [ 96.644550][ T8641] RBP: 00000000004ca4c0 R08: 0000000000000001 R09: 0000000000000000 [ 96.652500][ T8641] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004ca4cc [ 96.660631][ T8641] R13: 00007fffffe0b62f R14: 00007f1054173400 R15: 0000000000022000 Fixes: 905ae01c4ae2 ("Add a reference to ucounts for each cred") Reported-by: syzbot+01985d7909f9468f013c@syzkaller.appspotmail.com Signed-off-by: Alexey Gladkov <legion@kernel.org> Link: https://lkml.kernel.org/r/97433b1742c3331f02ad92de5a4f07d673c90613.1629735352.git.legion@kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2021-08-23ucounts: Fix regression preventing increasing of rlimits in init_user_nsEric W. Biederman
"Ma, XinjianX" <xinjianx.ma@intel.com> reported: > When lkp team run kernel selftests, we found after these series of patches, testcase mqueue: mq_perf_tests > in kselftest failed with following message. > > # selftests: mqueue: mq_perf_tests > # > # Initial system state: > # Using queue path: /mq_perf_tests > # RLIMIT_MSGQUEUE(soft): 819200 > # RLIMIT_MSGQUEUE(hard): 819200 > # Maximum Message Size: 8192 > # Maximum Queue Size: 10 > # Nice value: 0 > # > # Adjusted system state for testing: > # RLIMIT_MSGQUEUE(soft): (unlimited) > # RLIMIT_MSGQUEUE(hard): (unlimited) > # Maximum Message Size: 16777216 > # Maximum Queue Size: 65530 > # Nice value: -20 > # Continuous mode: (disabled) > # CPUs to pin: 3 > # ./mq_perf_tests: mq_open() at 296: Too many open files > not ok 2 selftests: mqueue: mq_perf_tests # exit=1 > ``` > > Test env: > rootfs: debian-10 > gcc version: 9 After investigation the problem turned out to be that ucount_max for the rlimits in init_user_ns was being set to the initial rlimit value. The practical problem is that ucount_max provides a limit that applications inside the user namespace can not exceed. Which means in practice that rlimits that have been converted to use the ucount infrastructure were not able to exceend their initial rlimits. Solve this by setting the relevant values of ucount_max to RLIM_INIFINITY. A limit in init_user_ns is pointless so the code should allow the values to grow as large as possible without riscking an underflow or an overflow. As the ltp test case was a bit of a pain I have reproduced the rlimit failure and tested the fix with the following little C program: > #include <stdio.h> > #include <fcntl.h> > #include <sys/stat.h> > #include <mqueue.h> > #include <sys/time.h> > #include <sys/resource.h> > #include <errno.h> > #include <string.h> > #include <stdlib.h> > #include <limits.h> > #include <unistd.h> > > int main(int argc, char **argv) > { > struct mq_attr mq_attr; > struct rlimit rlim; > mqd_t mqd; > int ret; > > ret = getrlimit(RLIMIT_MSGQUEUE, &rlim); > if (ret != 0) { > fprintf(stderr, "getrlimit(RLIMIT_MSGQUEUE) failed: %s\n", strerror(errno)); > exit(EXIT_FAILURE); > } > printf("RLIMIT_MSGQUEUE %lu %lu\n", > rlim.rlim_cur, rlim.rlim_max); > rlim.rlim_cur = RLIM_INFINITY; > rlim.rlim_max = RLIM_INFINITY; > ret = setrlimit(RLIMIT_MSGQUEUE, &rlim); > if (ret != 0) { > fprintf(stderr, "setrlimit(RLIMIT_MSGQUEUE, RLIM_INFINITY) failed: %s\n", strerror(errno)); > exit(EXIT_FAILURE); > } > > memset(&mq_attr, 0, sizeof(struct mq_attr)); > mq_attr.mq_maxmsg = 65536 - 1; > mq_attr.mq_msgsize = 16*1024*1024 - 1; > > mqd = mq_open("/mq_rlimit_test", O_RDONLY|O_CREAT, 0600, &mq_attr); > if (mqd == (mqd_t)-1) { > fprintf(stderr, "mq_open failed: %s\n", strerror(errno)); > exit(EXIT_FAILURE); > } > ret = mq_close(mqd); > if (ret) { > fprintf(stderr, "mq_close failed; %s\n", strerror(errno)); > exit(EXIT_FAILURE); > } > > return EXIT_SUCCESS; > } Fixes: 6e52a9f0532f ("Reimplement RLIMIT_MSGQUEUE on top of ucounts") Fixes: d7c9e99aee48 ("Reimplement RLIMIT_MEMLOCK on top of ucounts") Fixes: d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of ucounts") Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts") Reported-by: kernel test robot lkp@intel.com Acked-by: Alexey Gladkov <legion@kernel.org> Link: https://lkml.kernel.org/r/87eeajswfc.fsf_-_@disp2133 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-08-23bpf: Fix ringbuf helper function compatibilityDaniel Borkmann
Commit 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it") extended check_map_func_compatibility() by enforcing map -> helper function match, but not helper -> map type match. Due to this all of the bpf_ringbuf_*() helper functions could be used with a wrong map type such as array or hash map, leading to invalid access due to type confusion. Also, both BPF_FUNC_ringbuf_{submit,discard} have ARG_PTR_TO_ALLOC_MEM as argument and not a BPF map. Therefore, their check_map_func_compatibility() presence is incorrect since it's only for map type checking. Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it") Reported-by: Ryota Shiga (Flatt Security) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-08-23io_uring: add support for IORING_OP_LINKATDmitry Kadashev
IORING_OP_LINKAT behaves like linkat(2) and takes the same flags and arguments. In some internal places 'hardlink' is used instead of 'link' to avoid confusion with the SQE links. Name 'link' conflicts with the existing 'link' member of io_kiocb. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/io-uring/20210514145259.wtl4xcsp52woi6ab@wittgenstein/ Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20210708063447.3556403-12-dkadashev@gmail.com [axboe: add splice_fd_in check] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23io_uring: add support for IORING_OP_SYMLINKATDmitry Kadashev
IORING_OP_SYMLINKAT behaves like symlinkat(2) and takes the same flags and arguments. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/io-uring/20210514145259.wtl4xcsp52woi6ab@wittgenstein/ Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20210708063447.3556403-11-dkadashev@gmail.com [axboe: add splice_fd_in check] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23bio: improve kerneldoc documentation for bio_alloc_kiocb()Jens Axboe
We're missing a description for the 'nr_vecs' parameter. While in there, clarify that freeing a bio allocated through this function must be done from process context. Fixes: 1cbbd31c4ada ("bio: add allocation cache abstraction") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23block: provide bio_clear_hipri() helperJens Axboe
Any case that turns off REQ_HIPRI must also clear BIO_PERCPU_CACHE, as non-polled IO may complete through hard/soft IRQ and hence isn't safe for our polled bio alloc cache. Provide a helper that does just that, and use it in the merging code as well if we split a bio and turn off polling. Fixes: be863b9e4348 ("block: clear BIO_PERCPU_CACHE flag if polling isn't supported") Reported-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23block: use the percpu bio cache in __blkdev_direct_IOChristoph Hellwig
Use bio_alloc_kiocb to dip into the percpu cache of bios when the caller asks for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23io_uring: enable use of bio alloc cacheJens Axboe
Mark polled IO as being safe for dipping into the bio allocation cache, in case the targeted bio_set has it enabled. This brings an IOPOLL gen2 Optane QD=128 workload from ~3.2M IOPS to ~3.5M IOPS. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23block: clear BIO_PERCPU_CACHE flag if polling isn't supportedJens Axboe
The bio alloc cache relies on the fact that a polled bio will complete in process context, clear the cacheable flag if we disable polling for a given bio. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23bio: add allocation cache abstractionJens Axboe
Add a per-cpu bio_set cache for bio allocations, enabling us to quickly recycle them instead of going through the slab allocator. This cache isn't IRQ safe, and hence is only really suitable for polled IO. Very simple - keeps a count of bio's in the cache, and maintains a max of 512 with a slack of 64. If we get above max + slack, we drop slack number of bio's. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23fs: add kiocb alloc cache flagJens Axboe
If this kiocb can safely use the polled bio allocation cache, then this flag must be set. Generally this can be set for polled IO, where we will not see IRQ completions of the request. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23bio: optimize initialization of a bioJens Axboe
The memset() used is measurably slower in targeted benchmarks, wasting about 1% of the total runtime, or 50% of the (later) hot path cached bio alloc. Get rid of it and fill in the bio manually. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23io_uring: fix io_try_cancel_userdata race for iowqPavel Begunkov
WARNING: CPU: 1 PID: 5870 at fs/io_uring.c:5975 io_try_cancel_userdata+0x30f/0x540 fs/io_uring.c:5975 CPU: 0 PID: 5870 Comm: iou-wrk-5860 Not tainted 5.14.0-rc6-next-20210820-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:io_try_cancel_userdata+0x30f/0x540 fs/io_uring.c:5975 Call Trace: io_async_cancel fs/io_uring.c:6014 [inline] io_issue_sqe+0x22d5/0x65a0 fs/io_uring.c:6407 io_wq_submit_work+0x1dc/0x300 fs/io_uring.c:6511 io_worker_handle_work+0xa45/0x1840 fs/io-wq.c:533 io_wqe_worker+0x2cc/0xbb0 fs/io-wq.c:582 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 io_try_cancel_userdata() can be called from io_async_cancel() executing in the io-wq context, so the warning fires, which is there to alert anyone accessing task->io_uring->io_wq in a racy way. However, io_wq_put_and_exit() always first waits for all threads to complete, so the only detail left is to zero tctx->io_wq after the context is removed. note: one little assumption is that when IO_WQ_WORK_CANCEL, the executor won't touch ->io_wq, because io_wq_destroy() might cancel left pending requests in such a way. Cc: stable@vger.kernel.org Reported-by: syzbot+b0c9d1588ae92866515f@syzkaller.appspotmail.com Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/dfdd37a80cfa9ffd3e59538929c99cdd55d8699e.1629721757.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23io_uring: add support for IORING_OP_MKDIRATDmitry Kadashev
IORING_OP_MKDIRAT behaves like mkdirat(2) and takes the same flags and arguments. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20210708063447.3556403-10-dkadashev@gmail.com [axboe: add splice_fd_in check] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23namei: update do_*() helpers to return intsDmitry Kadashev
Update the following to return int rather than long, for uniformity with the rest of the do_* helpers in namei.c: * do_rmdir() * do_unlinkat() * do_mkdirat() * do_mknodat() * do_symlinkat() Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/io-uring/20210514143202.dmzfcgz5hnauy7ze@wittgenstein/ Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20210708063447.3556403-9-dkadashev@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23namei: make do_linkat() take struct filenameDmitry Kadashev
Pass in the struct filename pointers instead of the user string, for uniformity with do_renameat2, do_unlinkat, do_mknodat, etc. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/io-uring/20210330071700.kpjoyp5zlni7uejm@wittgenstein/ Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20210708063447.3556403-8-dkadashev@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23namei: add getname_uflags()Dmitry Kadashev
There are a couple of places where we already open-code the (flags & AT_EMPTY_PATH) check and io_uring will likely add another one in the future. Let's just add a simple helper getname_uflags() that handles this directly and use it. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/io-uring/20210415100815.edrn4a7cy26wkowe@wittgenstein/ Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20210708063447.3556403-7-dkadashev@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23namei: make do_symlinkat() take struct filenameDmitry Kadashev
Pass in the struct filename pointers instead of the user string, for uniformity with the recently converted do_mkdnodat(), do_unlinkat(), do_renameat(), do_mkdirat(). Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/io-uring/20210330071700.kpjoyp5zlni7uejm@wittgenstein/ Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20210708063447.3556403-6-dkadashev@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23namei: make do_mknodat() take struct filenameDmitry Kadashev
Pass in the struct filename pointers instead of the user string, for uniformity with the recently converted do_unlinkat(), do_renameat(), do_mkdirat(). Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/io-uring/20210330071700.kpjoyp5zlni7uejm@wittgenstein/ Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20210708063447.3556403-5-dkadashev@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23namei: make do_mkdirat() take struct filenameDmitry Kadashev
Pass in the struct filename pointers instead of the user string, and update the three callers to do the same. This is heavily based on commit dbea8d345177 ("fs: make do_renameat2() take struct filename"). This behaves like do_unlinkat() and do_renameat2(). Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20210708063447.3556403-4-dkadashev@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23namei: change filename_parentat() calling conventionsDmitry Kadashev
Since commit 5c31b6cedb675 ("namei: saner calling conventions for filename_parentat()") filename_parentat() had the following behavior WRT the passed in struct filename *: * On error the name is consumed (putname() is called on it); * On success the name is returned back as the return value; Now there is a need for filename_create() and filename_lookup() variants that do not consume the passed filename, and following the same "consume the name only on error" semantics is proven to be hard to reason about and result in confusing code. Hence this preparation change splits filename_parentat() into two: one that always consumes the name and another that never consumes the name. This will allow to implement two filename_create() variants in the same way, and is a consistent and hopefully easier to reason about approach. Link: https://lore.kernel.org/io-uring/CAOKbgA7MiqZAq3t-HDCpSGUFfco4hMA9ArAE-74fTpU+EkvKPw@mail.gmail.com/ Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com> Link: https://lore.kernel.org/r/20210708063447.3556403-3-dkadashev@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23namei: ignore ERR/NULL names in putname()Dmitry Kadashev
Supporting ERR/NULL names in putname() makes callers code cleaner, and is what some other path walking functions already support for the same reason. This also removes a few existing IS_ERR checks before putname(). Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/io-uring/CAHk-=wgCac9hBsYzKMpHk0EbLgQaXR=OUAjHaBtaY+G8A9KhFg@mail.gmail.com/ Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com> Link: https://lore.kernel.org/r/20210708063447.3556403-2-dkadashev@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23io_uring: IRQ rw completion batchingPavel Begunkov
Employ inline completion logic for read/write completions done via io_req_task_complete(). If ->uring_lock is contended, just do normal request completion, but if not, make tctx_task_work() to grab the lock and do batched inline completions in io_req_task_complete(). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/94589c3ce69eaed86a21bb1ec696407a54fab1aa.1629286357.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23io_uring: batch task work lockingPavel Begunkov
Many task_work handlers either grab ->uring_lock, or may benefit from having it. Move locking logic out of individual handlers to a lazy approach controlled by tctx_task_work(), so we don't keep doing tons of mutex lock/unlock. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/d6a34e147f2507a2f3e2fa1e38a9c541dcad3929.1629286357.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23io_uring: flush completions for fallbacksPavel Begunkov
io_fallback_req_func() doesn't expect anyone creating inline completions, and no one currently does that. Teach the function to flush completions preparing for further changes. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/8b941516921f72e1a64d58932d671736892d7fff.1629286357.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23io_uring: add ->splice_fd_in checksPavel Begunkov
->splice_fd_in is used only by splice/tee, but no other request checks it for validity. Add the check for most of request types excluding reads/writes/sends/recvs, we don't want overhead for them and can leave them be as is until the field is actually used. Cc: stable@vger.kernel.org Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/f44bc2acd6777d932de3d71a5692235b5b2b7397.1629451684.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23io_uring: add clarifying comment for io_cqring_ev_posted()Jens Axboe
We've previously had an issue where overflow flush unconditionally calls io_cqring_ev_posted() even if it didn't flush any events to the ring, causing wake and eventfd increment where no new events are available. Some applications don't like that, see commit b18032bb0a88 for details. This came up in discussion for another patch recently, hence add a comment detailing what the relationship between calling the events posted helper and CQ ring entries is. Link: https://lore.kernel.org/io-uring/77a44fce-c831-16a6-8e80-9aee77f496a2@kernel.dk/ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23io_uring: place fixed tables under memcg limitsPavel Begunkov
Fixed tables may be large enough, place all of them together with allocated tags under memcg limits. Cc: stable@vger.kernel.org Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/b3ac9f5da9821bb59837b5fe25e8ef4be982218c.1629451684.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23io_uring: limit fixed table size by RLIMIT_NOFILEPavel Begunkov
Limit the number of files in io_uring fixed tables by RLIMIT_NOFILE, that's the first and the simpliest restriction that we should impose. Cc: stable@vger.kernel.org Suggested-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/b2756c340aed7d6c0b302c26dab50c6c5907f4ce.1629451684.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23io_uring: fix lack of protection for compl_nrHao Xu
coml_nr in ctx_flush_and_put() is not protected by uring_lock, this may cause problems when accessing in parallel: say coml_nr > 0 ctx_flush_and put other context if (compl_nr) get mutex coml_nr > 0 do flush coml_nr = 0 release mutex get mutex do flush (*) release mutex in (*) place, we call io_cqring_ev_posted() and users likely get no events there. To avoid spurious events, re-check the value when under the lock. Fixes: 2c32395d8111 ("io_uring: fix __tctx_task_work() ctx race") Signed-off-by: Hao Xu <haoxu@linux.alibaba.com> Link: https://lore.kernel.org/r/20210820221954.61815-1-haoxu@linux.alibaba.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23io_uring: Add register support for non-4k PAGE_SIZEwangyangbo
Now allocated rsrc table uses PAGE_SIZE as the size of 2nd-level, and accessing this table relies on each level index from fixed TABLE_SHIFT (12 - 3) in 4k page case. In order to correctly work in non-4k page, define TABLE_SHIFT as non-fixed (PAGE_SHIFT - shift of data) for 2nd-level table entry number. Signed-off-by: wangyangbo <wangyangbo@uniontech.com> Link: https://lore.kernel.org/r/20210819055657.27327-1-wangyangbo@uniontech.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-12 14:25:17 +0000