| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fix an infinite loop when bkey_i->k.u64s is 0.
This only happens in userspace, where 'bcachefs list_journal' can print
the entire contents of the journal, and non-dirty entries aren't
validated.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
- Don't print a checksum error when we first read a journal entry: we
print a checksum error later if we'll be using the journal entry.
- Continuing with the theme of of improving error messages and grouping
errors into a single log message per error, print a single 'checksum
error' message per journal entry, and use bch2_journal_ptr_to_text()
to print out where on the device it was.
- Factor out checksum error messages and checking for missing journal
entries into helpers, bch2_journal_read() has gotten obnoxiously big.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fix a small regression from the "run recovery passes" rewrite, which
enabled async recovery passes.
This fixes getting stuck in a loop in recovery.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Other repair code seems to be doing commits themselves, but
check_key_has_snapshot() does not.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fix a missing wakeup in
'bcachefs set-file-option' -> xattr option update -> inode_write
this was missing because the wakeup needs to happen after transaction
commit. Also, add a 'kick' counter, to make sure we don't miss a wakeup
that occured right after we finished checking the rebalance_work btree.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a version of bch2_kthread_io_clock_wait() that only schedules once -
behaving more like schedule_timeout().
This will be used for fixing rebalance wakeups.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Also, don't error out in bucket_ref_update_err(): we don't want to
return -BCH_ERR_cannot_rewind_recovery if it's not an insert, if it's an
overwrite we continue.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Repair code will do updates on older snapshot versions, so needs the
correct annotation.
Reported-by: syzbot+42581416dba62b364750@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If we're doing a reflink copy of existing reflinked data, we may only
set REFLINK_P_MAY_UPDATE_OPTIONS if it was set on the reflink pointer
we're copying from.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Large folios aren't supported without TRANSPARENT_HUGEPAGE
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We can't unlock a should_be_locked path unless we're in a transaction
restart.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Different versions differ on the size of the blacklist range; it is
theoretically possible that we could end up with blacklisted journal
sequence numbers newer than the newest seq we find in the journal, and
pick a new start seq that's blacklisted.
Explicitly check for this in bch2_fs_journal_start().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We don't want to change the bucket gen, on gen mismatch: it's possible
to have multiple btree nodes with different gens in the same bucket that
we want to keep, if we have to recover from btree node scan.
It's also not necessary to set g->gen_valid; add a comment to that
effect.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This was lost in the giant recovery pass rework - but it's used heavily
by bcachefs subcommand utilities.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When we go to allocate and find taht a bucket in the freespace btree is
actually allocated, we're supposed to return nonzero to tell the
allocator to skip it.
This fixes an emergency read only due to a bucket/ptr gen mismatch - we
also don't return the correct bucket gen when this happens.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fixes: 010c89468134 ("bcachefs: Check for casefolded dirents in non casefolded dirs")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If path->should_be_locked is true, that means user code (of the btree
API) has seen, in this transaction, something guarded by the node this
path has locked, and we have to keep it locked until the end of the
transaction.
Assert that we're not violating this; should_be_locked should also be
cleared only in _very_ special situations.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Simplify the "do we need to keep this locked?" checks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're adding new should_be_locked assertions: it's going to be illegal
to unlock a should_be_locked path when trans->locked is true.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're adding new should_be_locked assertions, also add a comment
explaining why clearing should_be_locked is safe here.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Small additional optimization over the previous patch, bringing us
closer to the original behaviour, except when we need to clone to avoid
a transaction restart.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Avoid transaction restarts due to failure to upgrade - we can traverse a
new iterator without a transaction restart.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
btree_path_get_locks, on failure, shouldn't unlock if we're not issuing
a transaction restart: we might drop locks we're not supposed to (if
path->should_be_locked is set).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Small helper to improve locking assertions.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_path_put_nokeep() was intended for paths we wouldn't need to
preserve for a transaction restart - it always frees them right away
when the ref hits 0.
But since paths are shared, freeing unconditionally is a bug, the path
might have been used elsewhere and have should_be_locked set, i.e. we
need to keep it locked until the end of the transaction.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We need to delay checksumming the journal write; we don't know the
blocksize until after we allocate the write.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Separate tracepoint message generation and other slowpath code into
non-inline functions, and use bch2_trans_log_str() instead of using a
printbuf for our journal message.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The data update path doesn't need a printbuf for its log message - this
will help reduce stack usage.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reduce stack usage - bkey_buf has a 96 byte buffer on the stack, but the
btree_trans bump allocator works just fine here.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
- Convert to a 'fs_str' tracepoint that just emits as a string: this
lets us build up the tracepoint with a printbuf, using our pretty
printers, and they're much easier to manage
- Include locks_held, before and after
- Include the btree node pointer we failed on (error pointer, null, or
real node)
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a flag for tracking whether a directory has case-insensitive
descendents - so that overlayfs can disallow mounting, even though the
filesystem supports case insensitivity.
This is a new on disk format version, with a (cheap) upgrade to ensure
the flag is correctly set on existing inodes.
Create, rename and fssetxattr are all plumbed to ensure the new flag is
set, and we've got new fsck code that hooks into check_inode(0.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Move a fsck.c helper into inode.c, eliminate some duplicate and organize
the inode lookup helpers.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a better helper for printing out paths of inodes when we don't know
the subvolume, for fsck.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bi_casefold only makes sense for directories, and since it's one of the
variable length fields setting it unnecessarily wastes space.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
There is one in for_each_btree_key_max().
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
There's no reason to be running this inside our transaction; it forces
us to copy the key we're updating to a temporary, which we'd like to
skip.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It used to be that we had a fixed maximum number of btree paths to work
with - 64.
That's no longer the case, so bch2_extent_atomic_end() doesn't have to
be as strict.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Accounting has gotten quite heavy, and there's lots of redundancy in
accounting updates within a transaction, as we often add/delete multiple
extents that touch the same accountign counters.
This will reduce the amount of data that we journal, and reduce pressure
downstream on the btree write buffer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
There can be a lot of rendundancy in accounting updates within a single
btree transaction.
Split out accounting updates so that they can be deduped, in the next
commit.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
