summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-09-20ARM: dts: am335x-lxm: get rid of phy_id propertyGrygorii Strashko
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-20ARM: dts: am335x-moxa-uc-8100-me-t: get rid of phy_id propertyGrygorii Strashko
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-20ARM: dts: am335x-nano: get rid of phy_id propertyGrygorii Strashko
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-20ARM: dts: am335x-pdu001: get rid of phy_id propertyGrygorii Strashko
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-20ARM: dts: am335x-pepper: get rid of phy_id propertyGrygorii Strashko
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-20ARM: dts: am335x-shc: get rid of phy_id propertyGrygorii Strashko
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-20Merge branch 'am335x-evm-port-fix' into omap-for-v4.20/dtTony Lindgren
2018-09-20ARM: dts: am335x-evm: fix number of cpswGrygorii Strashko
am335x-evm has only one CPSW external port physically wired, but DT defines 2 ext. ports. As result, PHY connection failure reported for the second ext. port. Update DT to reflect am335x-evm board HW configuration, and, while here, switch to use phy-handle instead of phy_id. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-20ARM: dts: mvebu: Add device tree for db-88f6820-amc boardChris Packham
This board is a plugin card for some of Marvell's switch development kits. It's similar to the non-amc board except that it has no SATA support. [gregory: fix DTC warning and use the new partition binding] Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-09-20ARM: dts: mvebu: db-xc3-24g4: use new style nand bindingChris Packham
Update the nand flash binding to the new style. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-09-20ARM: dts: mvebu: db-dxbc2: use new style nand bindingChris Packham
Update the nand flash binding to the new style. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-09-20ARM: dts: mvebu: 98dx3236: Rename nand controller nodeChris Packham
Update the 98dx3236 SoC and dependent boards to use "nand-controller" instead of "nand". Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-09-20ARM: dts: aspeed: Adding Facebook TiogaPass BMCVijay Khemka
Initial introduction of Facebook TiogaPass family equipped with Aspeed 2500 BMC SoC. TiogaPass is a x86 server development kit with a ASPEED ast2500 BMC manufactured by Facebook. Specifically, This adds the TiogaPass platform device tree file including the flash layout used by the TiogaPass BMC machines. Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-09-20ARM: dts: aspeed: Add HXT StarDragon 4800 REP2 BMCYuan Yao
The HXT StarDragon 4800 REP2 (Reference Evaluation Platform) is an aarch64 ARMv8 server platform with an ast2520 BMC. Signed-off-by: Yuan Yao <yao.yuan@linaro.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-09-20ARM: dts: stm32: update rtc st,syscfg property on stm32h743Amelie Delaunay
To fit with latest rtc driver updates, rtc st,syscfg property must contain the control register offset of pwrcfg and the mask corresponding to the DBP (Disable Backup Protection) bit. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-09-20ARM: dts: stm32: Remove cd-inverted property for stm32f746-discoPatrice Chotard
Remove cd-inverted property and update cd-gpios active level accordingly Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-09-20ARM: dts: stm32: Remove cd-inverted property for stm32f769-discoPatrice Chotard
Remove cd-inverted property and update cd-gpios active level accordingly Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-09-20ARM: dts: stm32: Remove cd-inverted property for stm32f469-discoPatrice Chotard
Remove cd-inverted property and update cd-gpios active level accordingly Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-09-20ARM: dts: stm32: Remove cd-inverted property for stm32429i-evalPatrice Chotard
Remove cd-inverted property and update cd-gpios active level accordingly Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-09-20ARM: dts: stm32: Add clk-lse node's label on stm32f429Patrice Chotard
Add missing clk_lse label for node clk-lse. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-09-19arm: dts: sama5d2: Update coresight bindings for hardware portsSuzuki K Poulose
Switch to the new coresight bindings for hardware ports Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-19ARM: s3c24xx: Restore proper usage of pr_info/pr_contCedric Roux
Fix wrong usage of pr_info introduced by the commit e728e4f20100 ("ARM: s3c24xx: formatting cleanup in mach-mini2440.c"). Since the idea is to print on a single line, pr_cont has to be used. Signed-off-by: Cedric Roux <sed@free.fr> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-09-19ARM: dts: at91: sama5d27_som1_ek: add adc regulatorsEugen Hristev
Add fixed regulators for the ADC. This board does not have a programmable PMIC, but fixed regulators. Adding them to DT so the ADC can probe correctly. Tested-by: Swapna Gurumani <swapna.gurumani@microchip.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-19ARM: dts: atmel: Fix I2C and SPI bus warningsRob Herring
dtc has new checks for I2C and SPI buses. Fix the warnings in node names and unit-addresses. arch/arm/boot/dts/at91-dvk_som60.dtb: Warning (i2c_bus_reg): /ahb/apb/i2c@f0018000/eeprom@87: I2C bus unit address format error, expected "57" arch/arm/boot/dts/at91-dvk_som60.dtb: Warning (i2c_bus_reg): /ahb/apb/i2c@f0018000/ft5426@56: I2C bus unit address format error, expected "38" arch/arm/boot/dts/at91-vinco.dtb: Warning (i2c_bus_reg): /ahb/apb/i2c@f8024000/rtc@64: I2C bus unit address format error, expected "32" arch/arm/boot/dts/at91sam9260ek.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1" arch/arm/boot/dts/at91sam9g20ek_2mmc.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1" arch/arm/boot/dts/at91sam9g20ek.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1" arch/arm/boot/dts/at91sam9261ek.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/tsc2046@0: SPI bus unit address format error, expected "2" Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-19arm: dts: hip04: Update coresight bindings for hardware portsSuzuki K Poulose
Switch to the new the hardware port bindings. Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-09-19arm64: dts: Add devicetree support for HiKey970 boardManivannan Sadhasivam
Add devicetree support for HiKey970 development board which based on Hi3670 SoC and is also one of the 96Boards Consumer Edition and AI platform. Only UART6 is enabled which is the default console required by the 96Boards Consumer Edition Specification. This patch has been tested on HiKey970 Board. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-09-19dt-bindings: arm: hisilicon: Add binding for HiKey970 boardManivannan Sadhasivam
Add devicetree binding for HiKey970 board. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-09-19arm64: dts: Add devicetree for Hisilicon Hi3670 SoCManivannan Sadhasivam
Add initial devicetree support for Hisilicon Hi3670 SoC which is similar to Hi3660 SoC with NPU support. This SoC has Octal core BigLittle CPUs in two clusters(4 * A53 & 4 * A73). Only UART6 has been added for console support which is pre configured by the bootloader. A fixed clock is sourcing the UART6 which will get replaced by the clock driver when available. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-09-19dt-bindings: arm: hisilicon: Add binding for Hi3670 SoCManivannan Sadhasivam
Add devicetree binding for Hi3670 SoC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-09-19arm64: dts: hi6220: Update coresight bindings for hardware portsSuzuki K Poulose
Switch to updated coresight bindings for hw ports. Cc: xuwei5@hisilicon.com Cc: lipengcheng8@huawei.com Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-09-19arm64: dts: hisilicon: Add missing clocks property for CPUsViresh Kumar
The clocks property should either be present for all the CPUs of a cluster or none. If these are present only for a subset of CPUs of a cluster then things will start falling apart as soon as the CPUs are brought online in a different order. For example, this will happen because the operating system looks for such properties in the CPU node it is trying to bring up, so that it can register a cooling device. Add missing clocks property. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-09-19arm64: dts: renesas: r8a779{7|8}0: add CMT supportSergei Shtylyov
Describe CMTs in the R8A779{7|8}0 device trees. Based on the original (and large) patches by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-19arm64: dts: renesas: gen3: use 400kHz for I2C DVFS busWolfram Sang
The PMIC and EEPROM can operate at 400kHz, so use this speed. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-19arm64: dts: renesas: r8a77980: Attach the SYS-DMAC to the IPMMUMagnus Damm
For R-Car V3H hook up SYS-DMAC1 and SYS-DMAC2 to IPMMU-DS1 to match information in the R-Car Gen3 Rev.1.00 (April 2018) datasheet. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-19arm64: dts: renesas: r8a77990: Attach the SYS-DMAC to the IPMMUMagnus Damm
For R-Car E3 hook up SYS-DMAC0, SYS-DMAC1 and SYS-DMAC2 to IPMMU-DS0 and IPMMU-DS1 in same way as for R-Car H3. This follows the R-Car Gen3 Rev.1.00 (April 2018) datasheet. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-18arm64: dts: ti: k3-am6: Add Device Management Security Controller supportNishanth Menon
Add TISCI compatible System controller for AM6 SoCs. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2018-09-18arm64: dts: ti: am654: Add secure proxy instance for main domainNishanth Menon
Add secure proxy instance for Main domain Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2018-09-18arm64: dts: ti: am654: Add uart nodesNishanth Menon
Add uart nodes for AM654 device tree components. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2018-09-18arm64: dts: ti: k3-am65: Change #address-cells and #size-cells of ↵Kishon Vijay Abraham I
interconnect to 2 AM65 has two PCIe controllers and each PCIe controller has '2' address spaces one within the 4GB address space of the SoC and the other above the 4GB address space of the SoC (cbass_main) in addition to the register space. The size of the address space above the 4GB SoC address space is 4GB. These address ranges will be used by CPU/DMA to access the PCIe address space. In order to represent the address space above the 4GB SoC address space and to represent the size of this address space as 4GB, change address-cells and size-cells of interconnect to 2. Since OSPI has similar need in MCU Domain Memory Map, change address-cells and size-cells of cbass_mcu interconnect also to 2. Fixes: ea47eed33a3fe3d919 ("arm64: dts: ti: Add Support for AM654 SoC") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Vignesh R <vigneshr@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2018-09-18ARM: dts: xilinx: Fix I2C and SPI bus warningsRob Herring
dtc has new checks for I2C and SPI buses. Fix the warnings in node names and unit-addresses. arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@52: I2C bus unit address format error, expected "34" arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@53: I2C bus unit address format error, expected "35" arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@54: I2C bus unit address format error, expected "36" arch/arm/boot/dts/zynq-zc770-xm013.dtb: Warning (spi_bus_reg): /amba/spi@e0006000/eeprom@0: SPI bus unit address format error, expected "2" arch/arm/boot/dts/zynq-zc770-xm010.dtb: Warning (spi_bus_reg): /amba/spi@e0007000/flash@0: SPI bus unit address format error, expected "1" Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-17ARM: dts: socfpga: add timer resets for SoCFPGA platformDinh Nguyen
Add the resets property for all the timers on the Cyclone5/Arria5/Arria10 platforms. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-09-17arm64: dts: rockchip: Fix I2C bus unit-address error on rk3399-puma-haikouRob Herring
dtc has new checks for I2C buses. Fix the warnings in unit-addresses. arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dtb: Warning (i2c_bus_reg): /i2c@ff3d0000/codec@0a: I2C bus unit address format error, expected "a" Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-rockchip@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-09-17ARM: dts: rockchip: Fix erroneous SPI bus dtc warnings on rk3036Rob Herring
dtc has new checks for SPI buses. The rk3036 dts file has a node named spi' which causes false positive warnings. As the node is a pinctrl child node, change the node name to be 'spi-pins' to fix the warnings. arch/arm/boot/dts/rk3036-evb.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #address-cells for SPI bus arch/arm/boot/dts/rk3036-kylin.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #address-cells for SPI bus arch/arm/boot/dts/rk3036-evb.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #size-cells for SPI bus arch/arm/boot/dts/rk3036-kylin.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #size-cells for SPI bus Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-rockchip@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-09-17arm64: dts: renesas: ebisu: Add HDMI and CVBS inputJacopo Mondi
Add HDMI and CVBS inputs device nodes to R-Car E3 Ebisu board. Both HDMI and CVBS inputs are connected to an ADV7482 video decoder hooked to the SoC CSI-2 receiver port. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-14arm64: dts: meson: Fix erroneous SPI bus warningsRob Herring
dtc has new checks for SPI buses. The meson dts files have a node named spi' which causes false positive warnings. As the node is a pinctrl child node, change the node name to be 'spi-pins' to fix the warnings. arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb: Warning (spi_bus_bridge): /soc/periphs@c8834000/pinctrl@4b0/spi: incorrect #address-cells for SPI bus Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: linux-amlogic@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-14arm64: dts: renesas: Remove unneeded status from thermal nodesGeert Uytterhoeven
The thermal device is supposed to be always enabled. As the default value of the status property is "okay", there is no need to make this explicit in SoC-specific .dtsi files where no override is involved. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-14ARM: dts: r9a06g032: Correct UART and add all other UARTsPhil Edworthy
- UART0 was missing the bus clock ("apb_pclk"). - Use recently accepted r9a06g032 and rzn1 compat strings. - Add all the other UARTs. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> [simon: updated changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-14ARM: dts: sun9i: Fix I2C bus warningsRob Herring
dtc has new checks for I2C buses. The sun9i-a80 dts file has a node named 'i2c' which causes a false positive warning. As the node is a RSB bus, correct the node name to be 'rsb' to fix the warnings. arch/arm/boot/dts/sun9i-a80-cubieboard4.dtb: Warning (i2c_bus_reg): /soc/i2c@8003400/codec@e89:reg: I2C address must be less than 10-bits, got "0xe89" arch/arm/boot/dts/sun9i-a80-cubieboard4.dtb: Warning (i2c_bus_reg): /soc/i2c@8003400/pmic@745:reg: I2C address must be less than 10-bits, got "0x745" arch/arm/boot/dts/sun9i-a80-optimus.dtb: Warning (i2c_bus_reg): /soc/i2c@8003400/codec@e89:reg: I2C address must be less than 10-bits, got "0xe89" arch/arm/boot/dts/sun9i-a80-optimus.dtb: Warning (i2c_bus_reg): /soc/i2c@8003400/pmic@745:reg: I2C address must be less than 10-bits, got "0x745" Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-09-14ARM: dts: sunxi: Fix I2C bus warningsRob Herring
dtc has new checks for I2C buses. Fix the warnings in unit-addresses. arch/arm/boot/dts/sun8i-a23-gt90h-v4.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2ac00/touchscreen@0: I2C bus unit address format error, expected "40" arch/arm/boot/dts/sun8i-a23-inet86dz.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2ac00/touchscreen@0: I2C bus unit address format error, expected "40" arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2ac00/touchscreen@0: I2C bus unit address format error, expected "40" arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2ac00/touchscreen@0: I2C bus unit address format error, expected "40" arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2ac00/touchscreen@0: I2C bus unit address format error, expected "40" arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2ac00/touchscreen@0: missing or empty reg property arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2ac00/touchscreen@0: missing or empty reg property arch/arm/boot/dts/sun8i-a33-q8-tablet.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2ac00/touchscreen@0: missing or empty reg property arch/arm/boot/dts/sun5i-a13-utoo-p66.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2b000/touchscreen: I2C bus unit address format error, expected "40" arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2b000/touchscreen: missing or empty reg property arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2b000/touchscreen: missing or empty reg property arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2b000/touchscreen: missing or empty reg property arch/arm/boot/dts/sun5i-a13-q8-tablet.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2b000/touchscreen: missing or empty reg property Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-09-13ARM: dts: socfpga: Fix I2C bus unit-address errorDinh Nguyen
dtc has new checks for I2C buses. Fix the warnings in unit-addresses. arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dtb: Warning (i2c_bus_reg): /soc/i2c@ffc04000/adxl345@0: I2C bus unit address format error, expected "53" Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 05:40:59 +0000