summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-05-17btrfs: handle memory allocation failure in btrfs_csum_one_bioJohannes Thumshirn
Since f8a53bb58ec7 ("btrfs: handle checksum generation in the storage layer") the failures of btrfs_csum_one_bio() are handled via bio_end_io(). This means, we can return BLK_STS_RESOURCE from btrfs_csum_one_bio() in case the allocation of the ordered sums fails. This also fixes a syzkaller report, where injecting a failure into the kvzalloc() call results in a BUG_ON(). Reported-by: syzbot+d8941552e21eac774778@syzkaller.appspotmail.com Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-05-17btrfs: scrub: try harder to mark RAID56 block groups read-onlyQu Wenruo
Currently we allow a block group not to be marked read-only for scrub. But for RAID56 block groups if we require the block group to be read-only, then we're allowed to use cached content from scrub stripe to reduce unnecessary RAID56 reads. So this patch would: - Make btrfs_inc_block_group_ro() try harder During my tests, for cases like btrfs/061 and btrfs/064, we can hit ENOSPC from btrfs_inc_block_group_ro() calls during scrub. The reason is if we only have one single data chunk, and trying to scrub it, we won't have any space left for any newer data writes. But this check should be done by the caller, especially for scrub cases we only temporarily mark the chunk read-only. And newer data writes would always try to allocate a new data chunk when needed. - Return error for scrub if we failed to mark a RAID56 chunk read-only Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-05-17gpiolib: fix allocation of mixed dynamic/static GPIOsAndreas Kemnade
If static allocation and dynamic allocation GPIOs are present, dynamic allocation pollutes the numberspace for static allocation, causing static allocation to fail. Enforce dynamic allocation above GPIO_DYNAMIC_BASE. Seen on a GTA04 when omap-gpio (static) and twl-gpio (dynamic) raced: [some successful registrations of omap_gpio instances] [ 2.553833] twl4030_gpio twl4030-gpio: gpio (irq 145) chaining IRQs 161..178 [ 2.561401] gpiochip_find_base: found new base at 160 [ 2.564392] gpio gpiochip5: (twl4030): added GPIO chardev (254:5) [ 2.564544] gpio gpiochip5: registered GPIOs 160 to 177 on twl4030 [...] [ 2.692169] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 2.697357] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 2.703643] gpiochip_find_base: found new base at 178 [ 2.704376] gpio gpiochip6: (omap-gpmc): added GPIO chardev (254:6) [ 2.704589] gpio gpiochip6: registered GPIOs 178 to 181 on omap-gpmc [...] [ 2.840393] gpio gpiochip7: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 2.849365] gpio gpiochip7: (gpio-160-191): GPIO integer space overlap, cannot add chip [ 2.857513] gpiochip_add_data_with_key: GPIOs 160..191 (gpio-160-191) failed to register, -16 [ 2.866149] omap_gpio 48310000.gpio: error -EBUSY: Could not register gpio chip On that device it is fixed invasively by commit 92bf78b33b0b4 ("gpio: omap: use dynamic allocation of base") but let's also fix that for devices where there is still a mixture of static and dynamic allocation. Fixes: 7b61212f2a07 ("gpiolib: Get rid of ARCH_NR_GPIOS") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: <christophe.leroy@csgroup.eu> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-05-17drm: panel-orientation-quirks: Change Air's quirk to support Air PlusMaya Matuszczyk
It turned out that Aya Neo Air Plus had a different board name than expected. This patch changes Aya Neo Air's quirk to account for that, as both devices share "Air" in DMI product name. Tested on Air claiming to be an Air Pro, and on Air Plus. Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230515184843.1552612-1-maccraft123mc@gmail.com
2023-05-17gpio: mockup: Fix mode of debugfs filesZev Weiss
This driver's debugfs files have had a read operation since commit 2a9e27408e12 ("gpio: mockup: rework debugfs interface"), but were still being created with write-only mode bits. Update them to indicate that the files can also be read. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Fixes: 2a9e27408e12 ("gpio: mockup: rework debugfs interface") Cc: stable@kernel.org # v5.1+ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-05-17mailmap: add entries for Nikolay AleksandrovNikolay Aleksandrov
Turns out I missed a few patches due to use of old addresses by senders. Add a mailmap entry with my old addresses. Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17igb: fix bit_shift to be in [1..8] rangeAleksandr Loktionov
In igb_hash_mc_addr() the expression: "mc_addr[4] >> 8 - bit_shift", right shifting "mc_addr[4]" shift by more than 7 bits always yields zero, so hash becomes not so different. Add initialization with bit_shift = 1 and add a loop condition to ensure bit_shift will be always in [1..8] range. Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony nguyen says: ==================== Intel Wired LAN Driver Updates 2023-05-16 This series contains updates to ice and iavf drivers. Ahmed adds setting of missed condition for statistics which caused incorrect reporting of values for ice. For iavf, he removes a call to set VLAN offloads during re-initialization which can cause incorrect values to be set. Dawid adds checks to ensure VF is ready to be reset before executing commands that will require it to be reset on ice. --- v2: Patch 2 - Redo commit message ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17net: dsa: mv88e6xxx: Fix mv88e6393x EPC write command offsetMarco Migliore
According to datasheet, the command opcode must be specified into bits [14:12] of the Extended Port Control register (EPC). Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marco Migliore <m.migliore@tiesse.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17cassini: Fix a memory leak in the error handling path of cas_init_one()Christophe JAILLET
cas_saturn_firmware_init() allocates some memory using vmalloc(). This memory is freed in the .remove() function but not it the error handling path of the probe. Add the missing vfree() to avoid a memory leak, should an error occur. Fixes: fcaa40669cd7 ("cassini: use request_firmware") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17tun: Fix memory leak for detached NAPI queue.Kuniyuki Iwashima
syzkaller reported [0] memory leaks of sk and skb related to the TUN device with no repro, but we can reproduce it easily with: struct ifreq ifr = {} int fd_tun, fd_tmp; char buf[4] = {}; fd_tun = openat(AT_FDCWD, "/dev/net/tun", O_WRONLY, 0); ifr.ifr_flags = IFF_TUN | IFF_NAPI | IFF_MULTI_QUEUE; ioctl(fd_tun, TUNSETIFF, &ifr); ifr.ifr_flags = IFF_DETACH_QUEUE; ioctl(fd_tun, TUNSETQUEUE, &ifr); fd_tmp = socket(AF_PACKET, SOCK_PACKET, 0); ifr.ifr_flags = IFF_UP; ioctl(fd_tmp, SIOCSIFFLAGS, &ifr); write(fd_tun, buf, sizeof(buf)); close(fd_tun); If we enable NAPI and multi-queue on a TUN device, we can put skb into tfile->sk.sk_write_queue after the queue is detached. We should prevent it by checking tfile->detached before queuing skb. Note this must be done under tfile->sk.sk_write_queue.lock because write() and ioctl(IFF_DETACH_QUEUE) can run concurrently. Otherwise, there would be a small race window: write() ioctl(IFF_DETACH_QUEUE) `- tun_get_user `- __tun_detach |- if (tfile->detached) |- tun_disable_queue | `-> false | `- tfile->detached = tun | `- tun_queue_purge |- spin_lock_bh(&queue->lock) `- __skb_queue_tail(queue, skb) Another solution is to call tun_queue_purge() when closing and reattaching the detached queue, but it could paper over another problems. Also, we do the same kind of test for IFF_NAPI_FRAGS. [0]: unreferenced object 0xffff88801edbc800 (size 2048): comm "syz-executor.1", pid 33269, jiffies 4295743834 (age 18.756s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<000000008c16ea3d>] __do_kmalloc_node mm/slab_common.c:965 [inline] [<000000008c16ea3d>] __kmalloc+0x4a/0x130 mm/slab_common.c:979 [<000000003addde56>] kmalloc include/linux/slab.h:563 [inline] [<000000003addde56>] sk_prot_alloc+0xef/0x1b0 net/core/sock.c:2035 [<000000003e20621f>] sk_alloc+0x36/0x2f0 net/core/sock.c:2088 [<0000000028e43843>] tun_chr_open+0x3d/0x190 drivers/net/tun.c:3438 [<000000001b0f1f28>] misc_open+0x1a6/0x1f0 drivers/char/misc.c:165 [<000000004376f706>] chrdev_open+0x111/0x300 fs/char_dev.c:414 [<00000000614d379f>] do_dentry_open+0x2f9/0x750 fs/open.c:920 [<000000008eb24774>] do_open fs/namei.c:3636 [inline] [<000000008eb24774>] path_openat+0x143f/0x1a30 fs/namei.c:3791 [<00000000955077b5>] do_filp_open+0xce/0x1c0 fs/namei.c:3818 [<00000000b78973b0>] do_sys_openat2+0xf0/0x260 fs/open.c:1356 [<00000000057be699>] do_sys_open fs/open.c:1372 [inline] [<00000000057be699>] __do_sys_openat fs/open.c:1388 [inline] [<00000000057be699>] __se_sys_openat fs/open.c:1383 [inline] [<00000000057be699>] __x64_sys_openat+0x83/0xf0 fs/open.c:1383 [<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80 [<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc unreferenced object 0xffff88802f671700 (size 240): comm "syz-executor.1", pid 33269, jiffies 4295743854 (age 18.736s) hex dump (first 32 bytes): 68 c9 db 1e 80 88 ff ff 68 c9 db 1e 80 88 ff ff h.......h....... 00 c0 7b 2f 80 88 ff ff 00 c8 db 1e 80 88 ff ff ..{/............ backtrace: [<00000000e9d9fdb6>] __alloc_skb+0x223/0x250 net/core/skbuff.c:644 [<000000002c3e4e0b>] alloc_skb include/linux/skbuff.h:1288 [inline] [<000000002c3e4e0b>] alloc_skb_with_frags+0x6f/0x350 net/core/skbuff.c:6378 [<00000000825f98d7>] sock_alloc_send_pskb+0x3ac/0x3e0 net/core/sock.c:2729 [<00000000e9eb3df3>] tun_alloc_skb drivers/net/tun.c:1529 [inline] [<00000000e9eb3df3>] tun_get_user+0x5e1/0x1f90 drivers/net/tun.c:1841 [<0000000053096912>] tun_chr_write_iter+0xac/0x120 drivers/net/tun.c:2035 [<00000000b9282ae0>] call_write_iter include/linux/fs.h:1868 [inline] [<00000000b9282ae0>] new_sync_write fs/read_write.c:491 [inline] [<00000000b9282ae0>] vfs_write+0x40f/0x530 fs/read_write.c:584 [<00000000524566e4>] ksys_write+0xa1/0x170 fs/read_write.c:637 [<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80 [<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fixes: cde8b15f1aab ("tuntap: add ioctl to attach or detach a file form tuntap device") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17Merge patch series "can: kvaser_pciefd: Bug fixes"Marc Kleine-Budde
Jimmy Assarsson <extja@kvaser.com> says: This patch series contains various bug fixes for the kvaser_pciefd driver. Link: https://lore.kernel.org/r/20230516134318.104279-1-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-17can: kvaser_pciefd: Disable interrupts in probe error pathJimmy Assarsson
Disable interrupts in error path of probe function. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20230516134318.104279-7-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-17can: kvaser_pciefd: Do not send EFLUSH command on TFD interruptJimmy Assarsson
Under certain circumstances we send two EFLUSH commands, resulting in two EFLUSH ack packets, while only expecting a single EFLUSH ack. This can cause the driver Tx flush completion to get out of sync. To avoid this problem, don't enable the "Transmit buffer flush done" (TFD) interrupt and remove the code handling it. Now we only send EFLUSH command after receiving status packet with "Init detected" (IDET) bit set. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20230516134318.104279-6-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-17can: kvaser_pciefd: Empty SRB buffer in probeJimmy Assarsson
Empty the "Shared receive buffer" (SRB) in probe, to assure we start in a known state, and don't process any irrelevant packets. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20230516134318.104279-5-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-17can: kvaser_pciefd: Call request_irq() before enabling interruptsJimmy Assarsson
Make sure the interrupt handler is registered before enabling interrupts. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20230516134318.104279-4-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-17can: kvaser_pciefd: Clear listen-only bit if not explicitly requestedJimmy Assarsson
The listen-only bit was never cleared, causing the controller to always use listen-only mode, if previously set. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20230516134318.104279-3-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-17can: kvaser_pciefd: Set CAN_STATE_STOPPED in kvaser_pciefd_stop()Jimmy Assarsson
Set can.state to CAN_STATE_STOPPED in kvaser_pciefd_stop(). Without this fix, wrong CAN state was repported after the interface was brought down. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20230516134318.104279-2-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-17dmaengine: ti: k3-udma: annotate pm function with __maybe_unusedVinod Koul
We get a warning when PM is not set: ../drivers/dma/ti/k3-udma.c:5552:12: warning: 'udma_pm_resume' defined but not used [-Wunused-function] 5552 | static int udma_pm_resume(struct device *dev) | ^~~~~~~~~~~~~~ ../drivers/dma/ti/k3-udma.c:5530:12: warning: 'udma_pm_suspend' defined but not used [-Wunused-function] 5530 | static int udma_pm_suspend(struct device *dev) | ^~~~~~~~~~~~~~~ Fix this by annotating pm function with __maybe_unused Fixes: fbe05149e40b ("dmaengine: ti: k3-udma: Add system suspend/resume support") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://lore.kernel.org/r/20230516174311.117264-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-17dmaengine: idxd: Fix passing freed memory in idxd_cdev_open()Harshit Mogalapalli
Smatch warns: drivers/dma/idxd/cdev.c:327: idxd_cdev_open() warn: 'sva' was already freed. When idxd_wq_set_pasid() fails, the current code unbinds sva and then goes to 'failed_set_pasid' where iommu_sva_unbind_device is called again causing the above warning. [ device_user_pasid_enabled(idxd) is still true when calling failed_set_pasid ] Fix this by removing additional unbind when idxd_wq_set_pasid() fails Fixes: b022f59725f0 ("dmaengine: idxd: add idxd_copy_cr() to copy user completion record during page fault handling") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Acked-by: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20230509060716.2830630-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-17wifi: b43: fix incorrect __packed annotationArnd Bergmann
clang warns about an unpacked structure inside of a packed one: drivers/net/wireless/broadcom/b43/b43.h:654:4: error: field data within 'struct b43_iv' is less aligned than 'union (unnamed union at /home/arnd/arm-soc/drivers/net/wireless/broadcom/b43/b43.h:651:2)' and is usually due to 'struct b43_iv' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access] The problem here is that the anonymous union has the default alignment from its members, apparently because the original author mixed up the placement of the __packed attribute by placing it next to the struct member rather than the union definition. As the struct itself is also marked as __packed, there is no need to mark its members, so just move the annotation to the inner type instead. As Michael noted, the same problem is present in b43legacy, so change both at the same time. Acked-by: Michael Büsch <m@bues.ch> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Link: https://lore.kernel.org/oe-kbuild-all/202305160749.ay1HAoyP-lkp@intel.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230516183442.536589-1-arnd@kernel.org
2023-05-17wifi: rtw88: sdio: Always use two consecutive bytes for word operationsMartin Blumenstingl
The Allwinner sunxi-mmc controller cannot handle word (16 bit) transfers. So and sdio_{read,write}w fails with messages like the following example using an RTL8822BS (but the same problems were also observed with RTL8822CS and RTL8723DS chips): rtw_8822bs mmc1:0001:1: Firmware version 27.2.0, H2C version 13 sunxi-mmc 4021000.mmc: unaligned scatterlist: os f80 length 2 sunxi-mmc 4021000.mmc: map DMA failed rtw_8822bs mmc1:0001:1: sdio read16 failed (0x10230): -22 Use two consecutive single byte accesses for word operations instead. It turns out that upon closer inspection this is also what the vendor driver does, even though it does have support for sdio_{read,write}w. So we can conclude that the rtw88 chips do support word access but only on SDIO controllers that also support it. Since there's no way to detect if the controller supports word access or not the rtw88 sdio driver switches to the easiest approach: avoiding word access. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Closes: https://lore.kernel.org/linux-wireless/527585e5-9cdd-66ed-c3af-6da162f4b720@lwfinger.net/ Reported-by: Rudi Heitbaum <rudi@heitbaum.com> Link: https://github.com/LibreELEC/LibreELEC.tv/pull/7837#issue-1708469467 Fixes: 65371a3f14e7 ("wifi: rtw88: sdio: Add HCI implementation for SDIO based chipsets") Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230515195043.572375-1-martin.blumenstingl@googlemail.com
2023-05-16Merge tag 'ipsec-2023-05-16' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2023-05-16 1) Don't check the policy default if we have an allow policy. Fix from Sabrina Dubroca. 2) Fix netdevice refount usage on offload. From Leon Romanovsky. 3) Use netdev_put instead of dev_puti to correctly release the netdev on failure in xfrm_dev_policy_add. From Leon Romanovsky. 4) Revert "Fix XFRM-I support for nested ESP tunnels" This broke Netfilter policy matching. From Martin Willi. 5) Reject optional tunnel/BEET mode templates in outbound policies on netlink and pfkey sockets. From Tobias Brunner. 6) Check if_id in inbound policy/secpath match to make it symetric to the outbound codepath. From Benedict Wong. * tag 'ipsec-2023-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec: xfrm: Check if_id in inbound policy/secpath match af_key: Reject optional tunnel/BEET mode templates in outbound policies xfrm: Reject optional tunnel/BEET mode templates in outbound policies Revert "Fix XFRM-I support for nested ESP tunnels" xfrm: Fix leak of dev tracker xfrm: release all offloaded policy memory xfrm: don't check the default policy if the policy allows the packet ==================== Link: https://lore.kernel.org/r/20230516052405.2677554-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-16Merge tag 'linux-can-fixes-for-6.4-20230515' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2023-05-15 The first 2 patches are by Oliver Hartkopp and allow the MSG_CMSG_COMPAT flag for isotp and j1939. The next patch is by Oliver Hartkopp, too and adds missing CAN XL support in can_put_echo_skb(). Geert Uytterhoeven's patch let's the bxcan driver depend on ARCH_STM32. The last 5 patches are from Dario Binacchi and also affect the bxcan driver. The bxcan driver hit mainline with v6.4-rc1 and was originally written for IP cores containing 2 CAN interfaces with shared resources. Dario's series updates the DT bindings and driver to support IP cores with a single CAN interface instance as well as adding the bxcan to the stm32f746's device tree. * tag 'linux-can-fixes-for-6.4-20230515' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: ARM: dts: stm32: add CAN support on stm32f746 can: bxcan: add support for single peripheral configuration ARM: dts: stm32: add pin map for CAN controller on stm32f7 ARM: dts: stm32f429: put can2 in secondary mode dt-bindings: net: can: add "st,can-secondary" property can: CAN_BXCAN should depend on ARCH_STM32 can: dev: fix missing CAN XL support in can_put_echo_skb() can: j1939: recvmsg(): allow MSG_CMSG_COMPAT flag can: isotp: recvmsg(): allow MSG_CMSG_COMPAT flag ==================== Link: https://lore.kernel.org/r/20230515204722.1000957-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-16devlink: Fix crash with CONFIG_NET_NS=nIdo Schimmel
'__net_initdata' becomes a no-op with CONFIG_NET_NS=y, but when this option is disabled it becomes '__initdata', which means the data can be freed after the initialization phase. This annotation is obviously incorrect for the devlink net device notifier block which is still registered after the initialization phase [1]. Fix this crash by removing the '__net_initdata' annotation. [1] general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [#1] PREEMPT SMP CPU: 3 PID: 117 Comm: (udev-worker) Not tainted 6.4.0-rc1-custom-gdf0acdc59b09 #64 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014 RIP: 0010:notifier_call_chain+0x58/0xc0 [...] Call Trace: <TASK> dev_set_mac_address+0x85/0x120 dev_set_mac_address_user+0x30/0x50 do_setlink+0x219/0x1270 rtnl_setlink+0xf7/0x1a0 rtnetlink_rcv_msg+0x142/0x390 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x188/0x270 netlink_sendmsg+0x214/0x470 __sys_sendto+0x12f/0x1a0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: e93c9378e33f ("devlink: change per-devlink netdev notifier to static one") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/netdev/600ddf9e-589a-2aa0-7b69-a438f833ca10@samsung.com/ Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230515162925.1144416-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-16scsi: core: Decrease scsi_device's iorequest_cnt if dispatch failedWenchao Hao
If scsi_dispatch_cmd() failed, the SCSI command was not sent to the target, scsi_queue_rq() would return BLK_STS_RESOURCE and the related request would be requeued. The timeout of this request would not fire, no one would increase iodone_cnt. The above flow would result the iodone_cnt smaller than iorequest_cnt. So decrease the iorequest_cnt if dispatch failed to workaround the issue. Signed-off-by: Wenchao Hao <haowenchao2@huawei.com> Reported-by: Ming Lei <ming.lei@redhat.com> Closes: https://lore.kernel.org/r/ZF+zB+bB7iqe0wGd@ovpn-8-17.pek2.redhat.com Link: https://lore.kernel.org/r/20230515070156.1790181-3-haowenchao2@huawei.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-16scsi: Revert "scsi: core: Do not increase scsi_device's iorequest_cnt if ↵Wenchao Hao
dispatch failed" The "atomic_inc(&cmd->device->iorequest_cnt)" in scsi_queue_rq() would cause kernel panic because cmd->device may be freed after returning from scsi_dispatch_cmd(). This reverts commit cfee29ffb45b1c9798011b19d454637d1b0fe87d. Signed-off-by: Wenchao Hao <haowenchao2@huawei.com> Reported-by: Ming Lei <ming.lei@redhat.com> Closes: https://lore.kernel.org/r/ZF+zB+bB7iqe0wGd@ovpn-8-17.pek2.redhat.com Link: https://lore.kernel.org/r/20230515070156.1790181-2-haowenchao2@huawei.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-16scsi: storvsc: Don't pass unused PFNs to Hyper-V hostMichael Kelley
In a SCSI request, storvsc pre-allocates space for up to MAX_PAGE_BUFFER_COUNT physical frame numbers to be passed to Hyper-V. If the size of the I/O request requires more PFNs, a separate memory area of exactly the correct size is dynamically allocated. But when the pre-allocated area is used, current code always passes MAX_PAGE_BUFFER_COUNT PFNs to Hyper-V, even if fewer are needed. While this doesn't break anything because the additional PFNs are always zero, more bytes than necessary are copied into the VMBus channel ring buffer. This takes CPU cycles and wastes space in the ring buffer. For a typical 4 Kbyte I/O that requires only a single PFN, 248 unnecessary bytes are copied. Fix this by setting the payload_sz based on the actual number of PFNs required, not the size of the pre-allocated space. Reported-by: John Starks <jostarks@microsoft.com> Fixes: 8f43710543ef ("scsi: storvsc: Support PAGE_SIZE larger than 4K") Signed-off-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1684171241-16209-1-git-send-email-mikelley@microsoft.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-17ASoC: rt5682: Disable jack detection interrupt during suspendMatthias Kaehlcke
The rt5682 driver switches its regmap to cache-only when the device suspends and back to regular mode on resume. When the jack detect interrupt fires rt5682_irq() schedules the jack detect work. This can result in invalid reads from the regmap in cache-only mode if the work runs before the device has resumed: [ 56.245502] rt5682 9-001a: ASoC: error at soc_component_read_no_lock on rt5682.9-001a for register: [0x000000f0] -16 Disable the jack detection interrupt during suspend and re-enable it on resume. The driver already schedules the jack detection work on resume, so any state change during suspend is still handled. This is essentially the same as commit f7d00a9be147 ("SoC: rt5682s: Disable jack detection interrupt during suspend") for the rt5682s. Cc: stable@kernel.org Signed-off-by: Matthias Kaehlcke <mka@chromium.org Reviewed-by: Douglas Anderson <dianders@chromium.org Reviewed-by: Stephen Boyd <swboyd@chromium.org Link: https://lore.kernel.org/r/20230516164629.1.Ibf79e94b3442eecc0054d2b478779cc512d967fc@changeid Signed-off-by: Mark Brown <broonie@kernel.org
2023-05-17ASoC: lpass: Fix for KASAN use_after_free out of boundsRavulapati Vishnu Vardhan Rao
When we run syzkaller we get below Out of Bounds error. "KASAN: slab-out-of-bounds Read in regcache_flat_read" Below is the backtrace of the issue: BUG: KASAN: slab-out-of-bounds in regcache_flat_read+0x10c/0x110 Read of size 4 at addr ffffff8088fbf714 by task syz-executor.4/14144 CPU: 6 PID: 14144 Comm: syz-executor.4 Tainted: G W Hardware name: Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+) (DT) Call trace: dump_backtrace+0x0/0x4ec show_stack+0x34/0x50 dump_stack_lvl+0xdc/0x11c print_address_description+0x30/0x2d8 kasan_report+0x178/0x1e4 __asan_report_load4_noabort+0x44/0x50 regcache_flat_read+0x10c/0x110 regcache_read+0xf8/0x5a0 _regmap_read+0x45c/0x86c _regmap_update_bits+0x128/0x290 regmap_update_bits_base+0xc0/0x15c snd_soc_component_update_bits+0xa8/0x22c snd_soc_component_write_field+0x68/0xd4 tx_macro_put_dec_enum+0x1d0/0x268 snd_ctl_elem_write+0x288/0x474 By Error checking and checking valid values issue gets rectifies. Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com Link: https://lore.kernel.org/r/20230511112532.16106-1-quic_visr@quicinc.com Signed-off-by: Mark Brown <broonie@kernel.org
2023-05-16scsi: ufs: core: Fix MCQ nr_hw_queuesPo-Wen Kao
Since MAXQ is 0-based value, add one to obtain number of hardware queues. Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com> Link: https://lore.kernel.org/r/20230504154454.26654-4-powen.kao@mediatek.com Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-16scsi: ufs: core: Rename symbol sizeof_utp_transfer_cmd_desc()Po-Wen Kao
Naming the functions after standard operators like sizeof() may cause confusion. Rename it to ufshcd_get_ucd_size(). Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com> Link: https://lore.kernel.org/r/20230504154454.26654-3-powen.kao@mediatek.com Suggested-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Ziqi Chen <quic_ziqichen@quicinc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-16scsi: ufs: core: Fix MCQ tag calculationPo-Wen Kao
The transfer command descriptor is allocated in ufshcd_memory_alloc() and referenced by the transfer request descriptor with stride size sizeof_utp_transfer_cmd_desc() instead of sizeof(struct utp_transfer_cmd_desc). Consequently, computing tag by address offset should also refer to the same stride. Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com> Link: https://lore.kernel.org/r/20230504154454.26654-2-powen.kao@mediatek.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Ziqi Chen <quic_ziqichen@quicinc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-16RDMA/efa: Fix unsupported page sizes in deviceYonatan Nachum
Device uses 4KB size blocks for user pages indirect list while the driver creates those blocks with the size of PAGE_SIZE of the kernel. On kernels with PAGE_SIZE different than 4KB (ARM RHEL), this leads to a failure on register MR with indirect list because of the miss communication between driver and device. Fixes: 40909f664d27 ("RDMA/efa: Add EFA verbs implementation") Link: https://lore.kernel.org/r/20230511115103.13876-1-ynachum@amazon.com Reviewed-by: Firas Jahjah <firasj@amazon.com> Reviewed-by: Michael Margolin <mrgolin@amazon.com> Signed-off-by: Yonatan Nachum <ynachum@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-16RDMA/rxe: Convert spin_{lock_bh,unlock_bh} to ↵Guoqing Jiang
spin_{lock_irqsave,unlock_irqrestore} We need to call spin_lock_irqsave()/spin_unlock_irqrestore() for state_lock in rxe, otherwsie the callchain: ib_post_send_mad -> spin_lock_irqsave -> ib_post_send -> rxe_post_send -> spin_lock_bh -> spin_unlock_bh -> spin_unlock_irqrestore Causes below traces during run block nvmeof-mp/001 test due to mismatched spinlock nesting: WARNING: CPU: 0 PID: 94794 at kernel/softirq.c:376 __local_bh_enable_ip+0xc2/0x140 [ ... ] CPU: 0 PID: 94794 Comm: kworker/u4:1 Tainted: G E 6.4.0-rc1 #9 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 Workqueue: rdma_cm cma_work_handler [rdma_cm] RIP: 0010:__local_bh_enable_ip+0xc2/0x140 Code: 48 85 c0 74 72 5b 41 5c 5d 31 c0 89 c2 89 c1 89 c6 89 c7 41 89 c0 e9 bd 0e 11 01 65 8b 05 f2 65 72 48 85 c0 0f 85 76 ff ff ff <0f> 0b e9 6f ff ff ff e8 d2 39 1c 00 eb 80 4c 89 e7 e8 68 ad 0a 00 RSP: 0018:ffffb7cf818539f0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000201 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000201 RDI: ffffffffc0f25f79 RBP: ffffb7cf81853a00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffc0f25f79 R13: ffff8db1f0fa6000 R14: ffff8db2c63ff000 R15: 00000000000000e8 FS: 0000000000000000(0000) GS:ffff8db33bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000559758db0f20 CR3: 0000000105124000 CR4: 00000000003506f0 Call Trace: <TASK> _raw_spin_unlock_bh+0x31/0x40 rxe_post_send+0x59/0x8b0 [rdma_rxe] ib_send_mad+0x26b/0x470 [ib_core] ib_post_send_mad+0x150/0xb40 [ib_core] ? cm_form_tid+0x5b/0x90 [ib_cm] ib_send_cm_req+0x7c8/0xb70 [ib_cm] rdma_connect_locked+0x433/0x940 [rdma_cm] nvme_rdma_cm_handler+0x5d7/0x9c0 [nvme_rdma] cma_cm_event_handler+0x4f/0x170 [rdma_cm] cma_work_handler+0x6a/0xe0 [rdma_cm] process_one_work+0x2a9/0x580 worker_thread+0x52/0x3f0 ? __pfx_worker_thread+0x10/0x10 kthread+0x109/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 0 PID: 94794 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x37/0x60 [ ... ] CPU: 0 PID: 94794 Comm: kworker/u4:1 Tainted: G W E 6.4.0-rc1 #9 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 Workqueue: rdma_cm cma_work_handler [rdma_cm] RIP: 0010:warn_bogus_irq_restore+0x37/0x60 Code: fb 01 77 36 83 e3 01 74 0e 48 8b 5d f8 c9 31 f6 89 f7 e9 ac ea 01 00 48 c7 c7 e0 52 33 b9 c6 05 bb 1c 69 01 01 e8 39 24 f0 fe <0f> 0b 48 8b 5d f8 c9 31 f6 89 f7 e9 89 ea 01 00 0f b6 f3 48 c7 c7 RSP: 0018:ffffb7cf81853a58 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffb7cf81853a60 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8db2cfb1a9e8 R13: ffff8db2cfb1a9d8 R14: ffff8db2c63ff000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8db33bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000559758db0f20 CR3: 0000000105124000 CR4: 00000000003506f0 Call Trace: <TASK> _raw_spin_unlock_irqrestore+0x91/0xa0 ib_send_mad+0x1e3/0x470 [ib_core] ib_post_send_mad+0x150/0xb40 [ib_core] ? cm_form_tid+0x5b/0x90 [ib_cm] ib_send_cm_req+0x7c8/0xb70 [ib_cm] rdma_connect_locked+0x433/0x940 [rdma_cm] nvme_rdma_cm_handler+0x5d7/0x9c0 [nvme_rdma] cma_cm_event_handler+0x4f/0x170 [rdma_cm] cma_work_handler+0x6a/0xe0 [rdma_cm] process_one_work+0x2a9/0x580 worker_thread+0x52/0x3f0 ? __pfx_worker_thread+0x10/0x10 kthread+0x109/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> Fixes: f605f26ea196 ("RDMA/rxe: Protect QP state with qp->state_lock") Link: https://lore.kernel.org/r/20230510035056.881196-1-guoqing.jiang@linux.dev Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-16power: supply: Fix logic checking if system is running from batteryMario Limonciello
The logic used for power_supply_is_system_supplied() counts all power supplies and assumes that the system is running from AC if there is either a non-battery power-supply reporting to be online or if no power-supplies exist at all. The second rule is for desktop systems, that don't have any battery/charger devices. These systems will incorrectly report to be powered from battery once a device scope power-supply is registered (e.g. a HID device), since these power-supplies increase the counter. Apart from HID devices, recent dGPUs provide UCSI power supplies on a desktop systems. The dGPU by default doesn't have anything plugged in so it's 'offline'. This makes power_supply_is_system_supplied() return 0 with a count of 1 meaning all drivers that use this get a wrong judgement. To fix this case adjust the logic to also examine the scope of the power supply. If the power supply is deemed a device power supply, then don't count it. Cc: Evan Quan <Evan.Quan@amd.com> Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-05-16RDMA/rxe: Fix double unlock in rxe_qp.cBob Pearson
A recent patch can cause a double spin_unlock_bh() in rxe_qp_to_attr() at line 715 in rxe_qp.c. Move the 2nd unlock into the if statement. Fixes: f605f26ea196 ("RDMA/rxe: Protect QP state with qp->state_lock") Link: https://lore.kernel.org/r/20230515201056.1591140-1-rpearsonhpe@gmail.com Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/27773078-40ce-414f-8b97-781954da9f25@kili.mountain Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-16Documentation/filesystems: ramfs-rootfs-initramfs: use :Author:Randy Dunlap
Use the :Author: markup instead of making it a chapter heading. This cleans up the table of contents for this file. Fixes: 7f46a240b0a1 ("[PATCH] ramfs, rootfs, and initramfs docs") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Rob Landley <rob@landley.net> Reviewed-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230508055928.3548-1-rdunlap@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2023-05-16Documentation/filesystems: sharedsubtree: add section headingsRandy Dunlap
Several of the sections are missing underlines. This makes the generated contents have missing entries, so add the underlines. Fixes: 16c01b20ae05 ("doc/filesystems: more mount cleanups") Fixes: 9cfcceea8f7e ("[PATCH] Complete description of shared subtrees.") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230508055938.6550-1-rdunlap@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2023-05-16docs: quickly-build-trimmed-linux: various small fixes and improvementsThorsten Leemhuis
* improve the short description of localmodconfig in the step-by-step guide while fixing its broken first sentence * briefly mention immutable Linux distributions * use '--shallow-exclude=v6.0' throughout the document * instead of "git reset --hard; git checkout ..." use "git checkout --force ..." in the step-by-step guide: this matches the TLDR and is one command less to execute. This led to a few small adjustments to the text and the flow in the surrounding area. * fix two thinkos in the section explaining full git clones Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info> Link: https://lore.kernel.org/r/6f4684b9a5d11d3adb04e0af3cfc60db8b28eeb2.1684140700.git.linux@leemhuis.info Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2023-05-16Documentation: use capitalization for chapters and acronymsRandy Dunlap
Use capital letters in acronyms for CD-ROM, FPGA, and PCMCIA. Use capital letter in the first word of chapter headings for Locking, Timers, and "Brief tutorial on CRC computation". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Moritz Fischer <mdf@kernel.org> Cc: Wu Hao <hao.wu@intel.com> Cc: Tom Rix <trix@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Will Deacon <will@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: Xu Yilun <yilun.xu@intel.com> Reviewed-by: Phillip Potter <phil@philpotter.co.uk> Link: https://lore.kernel.org/r/20230516001518.14514-1-rdunlap@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2023-05-16ALSA: hda: Fix Oops by 9.1 surround channel namesTakashi Iwai
get_line_out_pfx() may trigger an Oops by overflowing the static array with more than 8 channels. This was reported for MacBookPro 12,1 with Cirrus codec. As a workaround, extend for the 9.1 channels and also fix the potential Oops by unifying the code paths accessing the same array with the proper size check. Reported-by: Olliver Schinagl <oliver@schinagl.nl> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/64d95eb0-dbdb-cff8-a8b1-988dc22b24cd@schinagl.nl Link: https://lore.kernel.org/r/20230516184412.24078-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-05-16tools headers UAPI: Sync s390 syscall table file that wires up the ↵Arnaldo Carvalho de Melo
memfd_secret syscall To pick the changes in these csets: 7608f70adcb1ea69 ("s390: wire up memfd_secret system call") That add support for this new syscall in tools such as 'perf trace'. For instance, this is now possible (adapted from the x86_64 test output): # perf trace -v -e memfd_secret event qualifier tracepoint filter: (common_pid != 13375 && common_pid != 3713) && (id == 447) ^C# That is the filter expression attached to the raw_syscalls:sys_{enter,exit} tracepoints. $ grep memfd_secret tools/perf/arch/x86/entry/syscalls/syscall_64.tbl 447 common memfd_secret sys_memfd_secret $ This addresses this perf build warnings: Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl' diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: https://lore.kernel.org/lkml/ZGPMW0p++D1Jdvf6@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-16tools headers UAPI: Sync linux/prctl.h with the kernel sourcesArnaldo Carvalho de Melo
ddc65971bb677aa9 ("prctl: add PR_GET_AUXV to copy auxv to userspace") To pick the changes in: That don't result in any changes in tooling: $ tools/perf/trace/beauty/prctl_option.sh > before $ cp include/uapi/linux/prctl.h tools/include/uapi/linux/prctl.h $ tools/perf/trace/beauty/prctl_option.sh > after $ diff -u before after $ This actually adds a new prctl arg, but it has to be dealt with differently, as it is not in sequence with the other arguments. Just silences this perf tools build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h' diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-16perf metrics: Avoid segv with --topdown for metrics without a groupIan Rogers
Some metrics may not have a metric_group which can result in segvs with "perf stat --topdown". Add a condition for the no metric_group case. Fixes: 1647cd5b8802698f ("perf stat: Implement --topdown using json metrics") Reported-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230515224530.671331-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-16Merge tag 'asoc-fix-v6.4-rc2' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.4 More fixes that came in since the merge window, the bulk of which are for the SOF code, I suspect as a result of the wide usage, active development and large code size rather than huge quality problems. There's also a couple of MAINTAINERS updates and some new device quirks.
2023-05-16samples/bpf: Drop unnecessary fallthroughAndrii Nakryiko
__fallthrough is now not supported. Instead of renaming it to now-canonical ([0]) fallthrough pseudo-keyword, just get rid of it and equate 'h' case to default case, as both emit usage information and succeed. [0] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20230516001718.317177-1-andrii@kernel.org
2023-05-16mac80211_hwsim: fix memory leak in hwsim_new_radio_nlZhengchao Shao
When parse_pmsr_capa failed in hwsim_new_radio_nl, the memory resources applied for by pmsr_capa are not released. Add release processing to the incorrect path. Fixes: 92d13386ec55 ("mac80211_hwsim: add PMSR capability support") Reported-by: syzbot+904ce6fbb38532d9795c@syzkaller.appspotmail.com Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230515092227.2691437-1-shaozhengchao@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-05-16wifi: iwlwifi: mvm: Add locking to the rate read flowAriel Malamud
The rs_drv_get_rate flow reads the lq_sta to return the optimal rate for tx frames. This read flow is not protected thereby leaving a small window, a few instructions wide, open to contention by an asynchronous rate update. Indeed this race condition was hit and the update occurred in the middle of the read. Fix this by locking the lq_sta struct during read. Signed-off-by: Ariel Malamud <ariel.malamud@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230514120631.b52c9ed5c379.I15290b78e0d966c1b68278263776ca9de841d5fe@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-05-16wifi: iwlwifi: Don't use valid_links to iterate sta linksMiri Korenblit
This bitmap equals to zero when in a non-MLO mode, and then we won't be iterating on any link. Use for_each_sta_active_link() instead, as it handles also the case of non-MLO mode. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230514120631.f32a8c08730a.Ib02248cd0b7f2bc885f91005c3c110dd027f9dcd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-09-12 16:38:40 +0000