summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-29ARM: at91/dt: fix phy address in sama5xmb to match the reg propertyBoris BREZILLON
Fix phy0 address to match the reg property defined in phy0 node. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29net/cadence/macb: fix invalid 0 return if no phy is discovered on mii initBoris BREZILLON
Replace misleading -1 (-EPERM) by a more appropriate return code (-ENXIO) in macb_mii_probe function. Save macb_mii_probe return before branching to err_out_unregister to avoid erronous 0 return. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29bridge: inherit slave devices needed_headroomFlorian Fainelli
Some slave devices may have set a dev->needed_headroom value which is different than the default one, most likely in order to prepend a hardware descriptor in front of the Ethernet frame to send. Whenever a new slave is added to a bridge, ensure that we update the needed_headroom value accordingly to account for the slave needed_headroom value. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29net: sctp: reorder sctp_globals to reduce cacheline usageDaniel Borkmann
Reduce cacheline usage from 2 to 1 cacheline for sctp_globals structure. By reordering elements, we can close gaps and simply achieve the following: Current situation: /* size: 80, cachelines: 2, members: 10 */ /* sum members: 57, holes: 4, sum holes: 16 */ /* padding: 7 */ /* last cacheline: 16 bytes */ Afterwards: /* size: 64, cachelines: 1, members: 10 */ /* padding: 7 */ Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29net: mdio-sun4i: Convert to devm_* apiJisheng Zhang
Use devm_ioremap_resource instead of of_iomap() and devm_kzalloc() instead of kmalloc() to make cleanup paths simpler. This patch also fixes the resource leak caused by missing corresponding iounamp() of the of_iomap(). Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29sfc: Add support for Solarflare SFC9100 familyBen Hutchings
This adds support for the EF10 network controller architecture and the SFC9100 family, starting with SFC9120 'Farmingdale', and bumps the driver version to 4.0. New features in the SFC9100 family include: - Flexible allocation of internal resources to PCIe physical and virtual functions under firmware control - RX event merging to reduce DMA writes at high packet rates - Integrated RX timestamping - PIO buffers for lower TX latency - Firmware-driven data path that supports additional offload features and filter types - Delivery of packets between functions and to multiple recipients, allowing firmware to implement a vswitch - Multiple RX flow hash (RSS) contexts with their own hash keys and indirection tables - 40G MAC (single port only) ...not all of which are enabled in this initial driver or the initial firmware release. Much of the new code is by Jon Cooper. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/pcie/trans.c
2013-08-29sfc: Make efx_mcdi_{init,fini}() call efx_mcdi_drv_attach()Ben Hutchings
This should be done during MCDI initialisation for any NIC. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29sfc: Allocate NVRAM partition ID range for PHY imagesMatthew Slattery
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29sfc: Add EF10 register and structure definitionsBen Hutchings
Also update comments and assertions in io.h: - EF10 does not have a general BIU collector and does not have the bug affecting TIMER_COMMAND_REG[0] on Falcon/Siena - The WPTR field moved within RX_DESC_UPD_REG and TX_DESC_UPD_REG. Adjust efx_writed_page() accordingly Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29sfc: Extend struct efx_tx_buffer to allow pushing option descriptorsBen Hutchings
The TX path firmware for EF10 supports 'option descriptors' to control offloads and various other features. Add a flag and field for these in struct efx_tx_buffer, and don't treat them as DMA descriptors on completion. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29sfc: Use a global count of active queues instead of pending drainsAlexandre Rames
On EF10, the firmware will initiate a queue flush in certain error cases. We need to accept that flush events might appear at any time after a queue has been initialised, not just when we try to flush them. We can handle Falcon-architecture in just the same way. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29sfc: Prepare for RX scatter on EF10Jon Cooper
RX DMA scatter is always enabled on EF10. Adjust the common RX completion handling to allow for this. RX completion events on EF10 include the length used from a single descriptor, not the cumulative length used. Add a field to struct efx_rx_queue to hold the cumulative length. [bwh: Also fix a related comment] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29sfc: Initialise IRQ moderation for all NIC types from efx_init_eventq()Ben Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29sfc: Allow efx_nic_type::dimension_resources to failBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29sfc: Allow event queue initialisation to failJon Cooper
On EF10, event queue initialisation requires an MCDI request which may return failure. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29sfc: Document conditions for multicast replication vs filter replacementBen Hutchings
Add the efx_filter_is_mc_recip() function to decide whether a filter is for a multicast recipient and can coexist with other filters with the same match values. Update efx_filter_insert_filter() kernel-doc to explain the conditions for this. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29sfc: Implement asynchronous MCDI requestsBen Hutchings
This will allow use of MCDI from the data path, in particular for accelerated RFS. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29sfc: Remove unnecessary use of atomic_tBen Hutchings
We can set, get and compare-and-exchange without using atomic_t. Change efx_mcdi_iface::state to the enum type we really wanted it to be. Suggested-by: David Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29sfc: Refactor efx_mcdi_rpc_start() and efx_mcdi_copyin()Ben Hutchings
Preparation for asynchronous MCDI requests. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29sfc: Add support for new board sensorsBen Hutchings
Add support for power and current sensors, which need to be named differently in sysfs. Power sensors also require values to be scaled between MCDI and sysfs, and have no minimum value. Add definitions of the power, current, fan, and additional temperature and voltage sensors found on SFA6902F, SFN7022F and SFN7122F. (Includes a bug fix from Andrew Jackson.) Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29ixgbe: add support for older QSFP active DA cablesEmil Tantilov
This patch adds support for QSFP active direct attach (DA) cables which pre-date SFF-8436 v3.6. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: include QSFP PHY types in ixgbe_is_sfp()Emil Tantilov
This patch makes sure that QSFP+ modules use the SFP+ code path for setting up link. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: add 1Gbps support for QSFP+Emil Tantilov
This patch adds GB speed support for QSFP+ modules. Autonegotiation is not supported with QSFP+. The user will have to set the desired speed on both link partners using ethtool advertise setting. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: fix SFF data dumps of SFP+ modules from an offsetEmil Tantilov
This patch fixes the read loop for the I2C data to account for the offset. Also includes a whitespace cleanup and removes ret_val as it is not needed. CC: Ben Hutchings <bhutchings@solarflare.com> Reported-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: cleanup some log messagesDon Skidmore
Some minor log messages cleanup, changing the level one message is logged, adding a bit of detail to another and put all the text on one line. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: zero out mailbox buffer on initEmil Tantilov
This patch initializes the msgbuf array to 0 in order to avoid using random numbers from the memory as MAC address for the VF. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: fix link test when connected to 1Gbps link partnerEmil Tantilov
This patch is a partial reverse of: commit dfcc4615f09c33454bc553567f7c7506cae60cb9 Author: Jacob Keller <jacob.e.keller@intel.com> Date: Thu Nov 8 07:07:08 2012 +0000 ixgbe: ethtool ixgbe_diag_test cleanup Specifically forcing the laser before the link check can lead to inconsistent results because it does not guarantee that the link will be negotiated correctly. Such is the case when dual speed SFP+ module is connected to a gigabit link partner. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: fix incorrect limit value in ring transverseDon Skidmore
We were transversing the tx_ring with IXGBE_NUM_RX_QUEUES. Now this define happens to have the correct value but this is misleading and a change later could easily make this no longer true. I updated it to netdev->num_tx_queues like we use in ixgbe_get_strings(). Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: Check return value on eeprom readsMark Rustad
This patch fixes the possible use of uninitialized memory by checking the return value on eeprom reads. These issues were identified by static analysis. In many cases error messages will be produced so that corrupted eeprom issues will be more visible. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: disable link when adapter goes downJacob Keller
This patch fixes an issue with the 82599 adapter where it can potentially keep link lights up when the adapter has gone down. The patch adds a function which ensures link is disabled, and calls this function when the adapter transitions to a down state. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next Ben Hutchings says: ==================== 1. Further cleanup and refactoring in preparation for EF10. 2. Remove ethtool stats that are always zero on Falcon boards. 3. Add an ethtool stat for merged TX completions. 4. Prepare to support merged RX completions. 5. Prepare to support more hwmon sensors. 6. Add support for new events that are generated by EF10 firmware. 7. Update MC reboot detection for EF10. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Included changes: - set the protocol field in the skb structure according to the encapsulated payload - make the gateway component send a uevent in case of "gw client mode" de-selection - increment version number - minor code rearrangement Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29qlcnic: underflow in qlcnic_validate_max_tx_rings()Dan Carpenter
This function checks the upper bound but it doesn't check for negative numbers: if (txq > QLCNIC_MAX_TX_RINGS) { I've solved this by making "txq" a u32 type. I chose that because ->tx_count in the ethtool_channels struct is a __u32. This bug was added in aa4a1f7df7 ('qlcnic: Enable Tx queue changes using ethtool for 82xx Series adapter.'). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29Merge branch 'xen-netback'David S. Miller
Wei Liu says: ==================== xen-netback: switch to NAPI + kthread 1:1 model This series implements NAPI + kthread 1:1 model for Xen netback. This model - provides better scheduling fairness among vifs - is prerequisite for implementing multiqueue for Xen network driver The second patch has the real meat: - make use of NAPI to mitigate interrupt - kthreads are not bound to CPUs any more, so that we can take advantage of backend scheduler and trust it to do the right thing Benchmark is done on a Dell T3400 workstation with 4 cores, running 4 DomUs. Netserver runs in Dom0. DomUs do netperf to Dom0 with following command: /root/netperf -H Dom0 -fm -l120 IRQs are distributed to 4 cores by hand in the new model, while in the old model vifs are automatically distributed to 4 kthreads. * New model %Cpu0 : 0.5 us, 20.3 sy, 0.0 ni, 28.9 id, 0.0 wa, 0.0 hi, 24.4 si, 25.9 st %Cpu1 : 0.5 us, 17.8 sy, 0.0 ni, 28.8 id, 0.0 wa, 0.0 hi, 27.7 si, 25.1 st %Cpu2 : 0.5 us, 18.8 sy, 0.0 ni, 30.7 id, 0.0 wa, 0.0 hi, 22.9 si, 27.1 st %Cpu3 : 0.0 us, 20.1 sy, 0.0 ni, 30.4 id, 0.0 wa, 0.0 hi, 22.7 si, 26.8 st Throughputs: 2027.89 2025.95 2018.57 2016.23 aggregated: 8088.64 * Old model %Cpu0 : 0.5 us, 68.8 sy, 0.0 ni, 16.1 id, 0.5 wa, 0.0 hi, 2.8 si, 11.5 st %Cpu1 : 0.4 us, 45.1 sy, 0.0 ni, 31.1 id, 0.4 wa, 0.0 hi, 2.1 si, 20.9 st %Cpu2 : 0.9 us, 44.8 sy, 0.0 ni, 30.9 id, 0.0 wa, 0.0 hi, 1.3 si, 22.2 st %Cpu3 : 0.8 us, 46.4 sy, 0.0 ni, 28.3 id, 1.3 wa, 0.0 hi, 2.1 si, 21.1 st Throughputs: 1899.14 2280.43 1963.33 1893.47 aggregated: 8036.37 We can see that the impact is mainly on CPU usage. The new model moves processing from kthread to NAPI (software interrupt). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29xen-netback: rename functionsWei Liu
As we move to 1:1 model and melt xen_netbk and xenvif together, it would be better to use single prefix for all functions in xen-netback. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29xen-netback: switch to NAPI + kthread 1:1 modelWei Liu
This patch implements 1:1 model netback. NAPI and kthread are utilized to do the weight-lifting job: - NAPI is used for guest side TX (host side RX) - kthread is used for guest side RX (host side TX) Xenvif and xen_netbk are made into one structure to reduce code size. This model provides better scheduling fairness among vifs. It is also prerequisite for implementing multiqueue for Xen netback. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29xen-netback: remove page tracking facilityWei Liu
The data flow from DomU to DomU on the same host in current copying scheme with tracking facility: copy DomU --------> Dom0 DomU | ^ |____________________________| copy The page in Dom0 is a page with valid MFN. So we can always copy from page Dom0, thus removing the need for a tracking facility. copy copy DomU --------> Dom0 -------> DomU Simple iperf test shows no performance regression (obviously we copy twice either way): W/ tracking: ~5.3Gb/s W/o tracking: ~5.4Gb/s Signed-off-by: Wei Liu <wei.liu2@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Matt Wilson <msw@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28cw1200: When debug is enabled, display all wakeup conditions for the ↵Solomon Peachy
wait_event_interruptible_timeout() call. When trying to debug an interrupt delivery problem I noticed that not all of the wakeup conditions on the worker thread were included in the debug message. This patch rectifies that. Signed-off-by: Solomon Peachy <pizza@shaftnet.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-28cw1200: Display the correct default reference clock.Solomon Peachy
This is purely a cosmetic bug. Signed-off-by: Solomon Peachy <pizza@shaftnet.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-28rt2800usb: Add WLI-UC-G300HP's Product ID.Masami Ichikawa
Support Bufallo WLI-UC-G300HP. Signed-off-by: Masami Ichikawa <masami256@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-28ath9k: Enable D3/L1 ASPM fix for AR9462Sujith Manoharan
AR9462 requires this HW fix for ASPM to work properly. Also, since WARegVal is used only for the AR8003 family, use AR_SREV_9300_20_OR_LATER. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-28ath9k: Remove unused ANI commandsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-28mwifiex: break a long line into two linesBing Zhao
It exceeded 80 characters. Split it into two lines. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-28Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-08-28Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-08-28ath9k: ar9003_eeprom.c:3618 fix variable name typoJohn W. Linville
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c: In function 'ar9003_hw_ant_ctrl_apply': >> drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3618: warning: 'regval' is used uninitialized in this function It seems obvious that 'regval' should have been 'value'... Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/trans.c net/mac80211/ibss.c
2013-08-28batman-adv: send GW_DEL event when the gw client mode is deselectedAntonio Quartulli
Whenever the GW client mode is deselected, a DEL event has to be sent in order to tell userspace that the current gateway has been lost. Send the uevent on state change only if a gateway was currently selected. Reported-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-08-28batman-adv: Start new development cycleSimon Wunderlich
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
generated by cgit (git 2.34.1) at 2025-09-11 21:54:17 +0000