| Age | Commit message (Collapse) | Author |
|---|
|
Previously kernel message can show that in which function we do the
injection, but unfortunately, most of the caller are the same, for
tracking more information of injection path, it needs to show upper
caller's name. This patch supports that ability.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Similar as f2fs_write_inode, f2fs_write_inline_data just
mark inode page dirty, so it's no need to write inline data
under read lock of cp_rwsem.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patches adds bitmaps to represent empty or full NAT blocks containing
free nid entries.
If we can find valid crc|cp_ver in the last block of checkpoint pack, we'll
use these bitmaps when building free nids. In order to avoid checkpointing
burden, up-to-date bitmaps will be flushed only during umount time. So,
normally we can get this gain, but when power-cut happens, we rely on fsck.f2fs
which recovers this bitmap again.
After this patch, we build free nids from nid #0 at mount time to make more
full NAT blocks, but in runtime, we check empty NAT blocks to load free nids
without loading any NAT pages from disk.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch replace rw semaphore extent_tree_lock with mutex lock
for no read cases with this lock.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When more than one data blocks are allocated, the F2FS_MAP_UNWRITTEN/MAPPED
flags will be overlapped by F2FS_MAP_NEW at the later times.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
proc A: proc B:
- writeback_sb_inodes
- __writeback_single_inode
- do_writepages
- f2fs_write_node_pages
- f2fs_balance_fs_bg - write_checkpoint
- build_free_nids - flush_nat_entries
- __build_free_nids - __flush_nat_entry_set
- ra_meta_pages - get_next_nat_page
- current_nat_addr - set_to_next_nat
[do nat_bitmap checking] - f2fs_change_bit
For proc A, nat_bitmap and nat_bitmap_mir would be compared without lock_op and
nm_i->nat_tree_lock, while proc B is changing nat_bitmap/nat_bitmap_ver in cp.
So it is normal for nat_bitmap/nat_bitmap diffrence under such scenario.
This patch fix this by removing the monitoring point.
[Fix: 599a09b f2fs: check in-memory nat version bitmap]
Signed-off-by: Hou Pengyang <houpengyang@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
To avoid such stale(fops, blk, len) info in f2fs_lookup_extent_tree_end tp
dio-23095 [005] ...1 17878.856859: f2fs_lookup_extent_tree_end:
dev = (259,30), ino = 856, pgofs = 0,
ext_info(fofs: 3441207040, blk: 4294967232, len: 3481143808)
Signed-off-by: Hou Pengyang <houpengyang@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Since has_not_enough_free_secs(sbi, 0, 0) must be true if has_not_enough_
free_secs(sbi, sec_freed, 0) is true, write_checkpoint is sure to execute in
both conditions.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
For converntional zones, we don't need to align discard commands to exact zone
size.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
We don't need to wait for each discard commands when unmounting the image.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
We have a kernel thread to issue discard commands, so we can increase the
number of batched discard sections. By default, now it becomes 4GB range.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adds MAX_DISCARD_BLOCKS() to avoid issuing too much large single
discard command.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Unfortunately, the nla policy was defined to have HWSIM_ATTR_RADIO_NAME
as an NLA_STRING, rather than NLA_NUL_STRING, so we can't use it as a
NUL-terminated string in the kernel.
Rather than break the API, kasprintf() the string to a new buffer to
guarantee NUL termination.
Reported-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Geminilake HDMI codec 0x280d is similar to previous platforms, so add it with
similar ops as previous.
Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
It's handy for userspace emulators like QEMU.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Yuval Mintz says:
====================
qed: Bug fixes
Patch #1 addresses a day-one race which is dependent on the number of Vfs
[I.e., more child VFs from a single PF make it more probable].
Patch #2 corrects a race that got introduced in the last set of fixes for
qed, one that would happen each time PF transitions to UP state.
I've built & tested those against current net-next.
Please consider applying the series there.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 653d2ffd6405 ("qed*: Fix link indication race") introduced another
race - one of the inner functions called from the link-change flow is
explicitly using the slowpath context dedicated PTT instead of gaining
that PTT from the caller. Since this flow can now be called from
a different context as well, we're in risk of the PTT breaking.
Fixes: 653d2ffd6405 ("qed*: Fix link indication race")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A PF syncronizes all IOV activity relating to its VFs
by using a single workqueue handling the work.
The workqueue would reach a bitmask of pending VF events
and act upon each in turn.
Problem is that the indication of a VF message [which sets
the 'vf event' bit for that VF] arrives and is set in
the slowpath attention context, which isn't syncronized with
the processing of the events.
When multiple VFs are present, it's possible that PF would
lose the indication of one of the VF's pending evens, leading
that VF to later timeout.
Instead of adding locks/barriers, simply move from a bitmask
into a per-VF indication inside that VF entry in the PF database.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains netfilter fixes for you net tree,
they are:
1) Missing ct zone size in the nft_ct initialization path, patch
from Florian Westphal.
2) Two patches for netfilter uapi headers, one to remove unnecessary
sysctl.h inclusion and another to fix compilation of xt_hashlimit.h
in userspace, from Dmitry V. Levin.
3) Patch to fix a sloppy change in nf_ct_expect that incorrectly
simplified nf_ct_expect_related_report() in the previous nf-next
batch. This also includes another patch for __nf_ct_expect_check()
to report success by returning 0 to keep it consistent with other
existing functions. From Jarno Rajahalme.
4) The ->walk() iterator of the new bitmap set type goes over the real
bitmap size, this results in incorrect dumps when NFTA_SET_USERDATA
is used.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Define a pr_fmt() for hibernate.c and convert all of the explicit
printk() calls into corresponding pr_*() so that they use the
pr_fmt() format.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The power_down() routine in the core hibernation code is not exactly
straightforward (to put it lightly), so clean it up to make it avoid
invoking itself recursively, among other things.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After commit 9908859acaa9 (cpuidle/menu: add per CPU PM QoS resume
latency consideration) the cpuidle menu governor calls
dev_pm_qos_read_value() on CPU devices to read the current resume
latency QoS constraint values for them. That function takes a spinlock
to prevent the device's power.qos pointer from becoming NULL during
the access which is a problem for the RT patchset where spinlocks are
converted into mutexes and the idle loop stops working.
However, it is not even necessary for the menu governor to take
that spinlock, because the power.qos pointer accessed under it
cannot be modified during the access anyway.
For this reason, introduce a "raw" routine for accessing device
QoS resume latency constraints without locking and use it in the
menu governor.
Fixes: 9908859acaa9 (cpuidle/menu: add per CPU PM QoS resume latency consideration)
Acked-by: Alex Shi <alex.shi@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Tracing is limited to 100 characters and this message passes
the limit when there are a few buffered frames. Shorten it.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
iwlwifi now supports RSS and can't let mac80211 track the
PS state based on the Rx frames since they can come out of
order. iwlwifi is now advertising AP_LINK_PS, and uses
explicit notifications to teach mac80211 about the PS state
of the stations and the PS poll / uAPSD trigger frames
coming our way from the peers.
Because of that, the TIM stopped being maintained in
mac80211. I tried to fix this in commit c68df2e7be0c
("mac80211: allow using AP_LINK_PS with mac80211-generated TIM IE")
but that was later reverted by Felix in commit 6c18a6b4e799
("Revert "mac80211: allow using AP_LINK_PS with mac80211-generated TIM IE")
since it broke drivers that do not implement set_tim.
Since none of the drivers that set AP_LINK_PS have the
set_tim() handler set besides iwlwifi, I can bail out in
__sta_info_recalc_tim if AP_LINK_PS AND .set_tim is not
implemented.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When running a BA session, the driver (or the hardware) already takes
care of retransmitting failed frames, since it has to keep the receiver
reorder window in sync.
Adding another layer of retransmit around that does not improve
anything. In fact, it can only lead to some strong reordering with huge
latency.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
mac80211_hwsim initializes a hrtimer with clockid
CLOCK_MONOTONIC_RAW. That's not supported.
Use CLOCK_MONOTONIC instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When RX aggregation starts, transmitter may continue send frames
with SN smaller than SSN until the AddBA response is received.
However, the reorder buffer is already initialized at this point,
which will cause the drop of such frames as duplicates since the
head SN of the reorder buffer is set to the SSN, which is bigger.
Cc: stable@vger.kernel.org
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The issue was found when entering suspend and resume.
It triggers a warning in:
mac80211/key.c: ieee80211_enable_keys()
...
WARN_ON_ONCE(sdata->crypto_tx_tailroom_needed_cnt ||
sdata->crypto_tx_tailroom_pending_dec);
...
It points out sdata->crypto_tx_tailroom_pending_dec isn't cleaned up successfully
in a delayed_work during suspend. Add a flush_delayed_work to fix it.
Cc: stable@vger.kernel.org
Signed-off-by: Matt Chen <matt.chen@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When adding per-CPU statistics, which added statistics back
to mac80211 for the fast-RX path, I evidently forgot to add
the "stats->packets++" line. The reason for that is likely
that I didn't see it since it's done in defragmentation for
the regular RX path.
Add the missing line to properly count received packets in
the fast-RX case.
Fixes: c9c5962b56c1 ("mac80211: enable collecting station statistics per-CPU")
Reported-by: Oren Givon <oren.givon@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add compat ioctl support to dma-buf. This lets one to use DMA_BUF_IOCTL_SYNC
ioctl from 32bit application on 64bit kernel. Data structures for both 32
and 64bit modes are same, so there is no need for additional translation
layer.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1487683261-2655-1-git-send-email-m.szyprowski@samsung.com
|
|
On this machine, the micmute button is connected to Line2 of the
codec and the micmute led is connected to GPIO2 of the codec.
After applying this quirk, both hotkey and led work well.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When we're used as a fallback algorithm, we should propagate
the NEED_FALLBACK bit when searching for the underlying ECB mode.
This just happens to fix a hang too because otherwise the search
may end up loading the same module that triggered this XTS creation.
Cc: stable@vger.kernel.org #4.10
Fixes: f1c131b45410 ("crypto: xts - Convert to skcipher")
Reported-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds crypto_requires_off which is an extension of
crypto_requires_sync for similar bits such as NEED_FALLBACK.
Cc: stable@vger.kernel.org #4.10
Suggested-by: Marcelo Cerri <marcelo.cerri@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
If NO_DMA=y:
ERROR: "bad_dma_ops" [drivers/crypto/mediatek/mtk-crypto.ko] undefined!
Add a dependency on HAS_DMA to fix this.
Fixes: 7dee9f618790d0b7 ("crypto: mediatek - remove ARM dependencies")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
on HAS_DMA
If NO_DMA=y:
ERROR: "bad_dma_ops" [drivers/crypto/atmel-tdes.ko] undefined!
ERROR: "bad_dma_ops" [drivers/crypto/atmel-sha.ko] undefined!
Add dependencies on HAS_DMA to fix this.
Fixes: ceb4afb3086ab08f ("crypto: atmel - refine Kconfig dependencies")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The exit path when curr->head cannot be allocated fails to kfree the
earlier allocated curr. Fix this by kfree'ing it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix the following smatch errors
cptvf_reqmanager.c:333 do_post_process() warn: variable dereferenced
before check 'cptvf'
cptvf_main.c:825 cptvf_remove() error: we previously assumed 'cptvf'
could be null
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: George Cherian <george.cherian@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
l2tp_ip_backlog_recv may not return -1 if the packet gets dropped.
The return value is passed up to ip_local_deliver_finish, which treats
negative values as an IP protocol number for resubmission.
Signed-off-by: Paul Hüber <phueber@kernsp.in>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix xfrm_neigh_lookup to provide dst->path to the
neigh_lookup dst_ops method.
When skb is provided, the IP address in packet should already
match the dst->path address family. But for the non-skb case,
we should consider the last tunnel address as nexthop address.
Fixes: f894cbf847c9 ("net: Add optional SKB arg to dst_ops->neigh_lookup().")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current annotation is wrong as it says that we're only called
under spinlock. In fact it should be marked as under either
spinlock or RCU read lock.
Fixes: da20420f83ea ("rhashtable: Add nested tables")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Dan Carpenter reported a use before NULL check bug in the function
bucket_table_free. In fact we don't need the NULL check at all as
no caller can provide a NULL argument. So this patch fixes this by
simply removing it.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
nla_memdup_cookie was overwriting err value, declared at function
scope and earlier initialized with result of ->init(). At success
nla_memdup_cookie() returns 0, and thus module refcnt decremented,
although the action was installed.
$ sudo tc actions add action pass index 1 cookie 1234
$ sudo tc actions ls action gact
action order 0: gact action pass
random type none pass val 0
index 1 ref 1 bind 0
$
$ lsmod
Module Size Used by
act_gact 16384 0
...
$
$ sudo rmmod act_gact
[ 52.310283] ------------[ cut here ]------------
[ 52.312551] WARNING: CPU: 1 PID: 455 at kernel/module.c:1113
module_put+0x99/0xa0
[ 52.316278] Modules linked in: act_gact(-) crct10dif_pclmul crc32_pclmul
ghash_clmulni_intel psmouse pcbc evbug aesni_intel aes_x86_64 crypto_simd
serio_raw glue_helper pcspkr cryptd
[ 52.322285] CPU: 1 PID: 455 Comm: rmmod Not tainted 4.10.0+ #11
[ 52.324261] Call Trace:
[ 52.325132] dump_stack+0x63/0x87
[ 52.326236] __warn+0xd1/0xf0
[ 52.326260] warn_slowpath_null+0x1d/0x20
[ 52.326260] module_put+0x99/0xa0
[ 52.326260] tcf_hashinfo_destroy+0x7f/0x90
[ 52.326260] gact_exit_net+0x27/0x40 [act_gact]
[ 52.326260] ops_exit_list.isra.6+0x38/0x60
[ 52.326260] unregister_pernet_operations+0x90/0xe0
[ 52.326260] unregister_pernet_subsys+0x21/0x30
[ 52.326260] tcf_unregister_action+0x68/0xa0
[ 52.326260] gact_cleanup_module+0x17/0xa0f [act_gact]
[ 52.326260] SyS_delete_module+0x1ba/0x220
[ 52.326260] entry_SYSCALL_64_fastpath+0x1e/0xad
[ 52.326260] RIP: 0033:0x7f527ffae367
[ 52.326260] RSP: 002b:00007ffeb402a598 EFLAGS: 00000202 ORIG_RAX:
00000000000000b0
[ 52.326260] RAX: ffffffffffffffda RBX: 0000559b069912a0 RCX: 00007f527ffae367
[ 52.326260] RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559b06991308
[ 52.326260] RBP: 0000000000000003 R08: 00007f5280264420 R09: 00007ffeb4029511
[ 52.326260] R10: 000000000000087b R11: 0000000000000202 R12: 00007ffeb4029580
[ 52.326260] R13: 0000000000000000 R14: 0000000000000000 R15: 0000559b069912a0
[ 52.354856] ---[ end trace 90d89401542b0db6 ]---
$
With the fix:
$ sudo modprobe act_gact
$ lsmod
Module Size Used by
act_gact 16384 0
...
$ sudo tc actions add action pass index 1 cookie 1234
$ sudo tc actions ls action gact
action order 0: gact action pass
random type none pass val 0
index 1 ref 1 bind 0
$
$ lsmod
Module Size Used by
act_gact 16384 1
...
$ sudo rmmod act_gact
rmmod: ERROR: Module act_gact is in use
$
$ sudo /home/mrv/bin/tc actions del action gact index 1
$ sudo rmmod act_gact
$ lsmod
Module Size Used by
$
Fixes: 1045ba77a ("net sched actions: Add support for user cookies")
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Calls made through the in-kernel interface can end up getting stuck because
of a missed variable update in a loop in rxrpc_recvmsg_data(). The problem
is like this:
(1) A new packet comes in and doesn't cause a notification to be given to
the client as there's still another packet in the ring - the
assumption being that if the client will keep drawing off data until
the ring is empty.
(2) The client is in rxrpc_recvmsg_data(), inside the big while loop that
iterates through the packets. This copies the window pointers into
variables rather than using the information in the call struct
because:
(a) MSG_PEEK might be in effect;
(b) we need a barrier after reading call->rx_top to pair with the
barrier in the softirq routine that loads the buffer.
(3) The reading of call->rx_top is done outside of the loop, and top is
never updated whilst we're in the loop. This means that even through
there's a new packet available, we don't see it and may return -EFAULT
to the caller - who will happily return to the scheduler and await the
next notification.
(4) No further notifications are forthcoming until there's an abort as the
ring isn't empty.
The fix is to move the read of call->rx_top inside the loop - but it needs
to be done before the condition is checked.
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When tc actions are loaded as a module and no actions have been installed,
flushing them would result in actions removed from the memory, but modules
reference count not being decremented, so that the modules would not be
unloaded.
Following is example with GACT action:
% sudo modprobe act_gact
% lsmod
Module Size Used by
act_gact 16384 0
%
% sudo tc actions ls action gact
%
% sudo tc actions flush action gact
% lsmod
Module Size Used by
act_gact 16384 1
% sudo tc actions flush action gact
% lsmod
Module Size Used by
act_gact 16384 2
% sudo rmmod act_gact
rmmod: ERROR: Module act_gact is in use
....
After the fix:
% lsmod
Module Size Used by
act_gact 16384 0
%
% sudo tc actions add action pass index 1
% sudo tc actions add action pass index 2
% sudo tc actions add action pass index 3
% lsmod
Module Size Used by
act_gact 16384 3
%
% sudo tc actions flush action gact
% lsmod
Module Size Used by
act_gact 16384 0
%
% sudo tc actions flush action gact
% lsmod
Module Size Used by
act_gact 16384 0
% sudo rmmod act_gact
% lsmod
Module Size Used by
%
Fixes: f97017cdefef ("net-sched: Fix actions flushing")
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This allows to enable and run the accompanying test (test_parman)
without dependencies on other users of parman.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 5e1859fbcc3c ("ipv4: ipmr: various fixes and cleanups") fixed
the issue for ipv4 ipmr:
ip_mroute_setsockopt() & ip_mroute_getsockopt() should not
access/set raw_sk(sk)->ipmr_table before making sure the socket
is a raw socket, and protocol is IGMP
The same fix should be done for ipv6 ipmr as well.
This patch can fix the panic caused by overwriting the same offset
as ipmr_table as in raw_sk(sk) when accessing other type's socket
by ip_mroute_setsockopt().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit b8607805dd15 ("sctp: not copying duplicate addrs to the assoc's
bind address list") tried to check for duplicate address before copying
to asoc's bind_addr list from global addr list.
But all the addrs' sin_ports in global addr list are 0 while the addrs'
sin_ports are bp->port in asoc's bind_addr list. It means even if it's
a duplicate address, af->cmp_addr will still return 0 as the their
sin_ports are different.
This patch is to fix it by setting the sin_port for addr param with
bp->port before comparing the addrs.
Fixes: b8607805dd15 ("sctp: not copying duplicate addrs to the assoc's bind address list")
Reported-by: Wei Chen <weichen@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch introduces two counters for ABORT_TASK success +
failure under:
/sys/kernel/config/target/core/$HBA/$DEV/statistics/scsi_tgt_dev/
that are useful for diagnosing various backend device latency
and front fabric issues.
Normally when folks see alot of aborts_complete happening,
it means the backend device I/O completion latency is high,
and not returning completions fast enough before host side
timeouts trigger.
And normally when folks see alot of aborts_no_task, it means
completions are being posted by target-core into fabric driver
code, but the responses aren't making it back to the host.
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
Due to the long standing checks in iscsit_snmp_get_tiqn()
that assume conn->sess->tpg dereference of tpg->tpg_tiqn
for iscsit_collect_login_stats() usage, some of the early
login failure cases like ISCSI_LOGIN_STATUS_TGT_FORBIDDEN
where not getting incremented, due to sess->tpg assignment
happening later in iscsi_login_zero_tsih_s2().
Instead, use the earlier conn->tpg assignment done by
iscsi_target_locate_portal() -> iscsit_get_tpg_from_np()
so the existing counters are incremented correctly for
the various early login failure cases.
Also, go ahead and drop the old rate limiting check in
iscsit_collect_login_stats(), so we get the true number
of failed login attempts in the existing statistics.
Reported-by: Ryan Stiles <ras@datera.io>
Cc: Ryan Stiles <ras@datera.io>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
