| Age | Commit message (Collapse) | Author |
|---|
|
Bkeys have gotten a lot bigger since this code was written and now are
often formatted across multiple lines - while the reason a bkey is
invalid will still be short and fit on a single line. This patch prints
the error bfore the bkey, making it a bit more readable.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
journal_iters_fix() was incorrectly rewinding iterators past keys they
had already returned, leading to those keys being double counted in the
bch2_gc() path - oops.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
btree updates before going RW are expensive if they're in random order,
since they use the list of keys for journal replay to insert, which is
just a gap buffer.
This patch improves the bucket invalidate path so that if
bch2_check_lrus() hasn't finished it only prints warnings instead of
doing an emergency shutdown, which means we can now set BCH_FS_MAY_GO_RW
before bch2_check_lrus().
Also, the filesystem state bits are reorganized a bit.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This adds a new superblock field for persisting counters
and adds a sysfs interface in counters/ exposing these counters.
The superblock field is ignored by older versions letting us avoid
an on disk version bump.
Each sysfs file outputs a counter that tracks since filesystem
creation and a counter for the current mount session.
Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Delete some obsolete tracepoints, organize alloc tracepoints better,
make a few tracepoints more consistent.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
We shouldn't kick journal reclaim unnecessarily, it's got its own timer
for that.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Can't take btree node locks while holding btree_reserve_cache_lock - it
would be nice if we could check this with lockdep.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
We're seeing occasional firings of the assertion in the key cache
shutdown code that nr_dirty == 0, which means we must sometimes be doing
transaction commits after we've gone read only.
Cleanups & changes:
- BCH_FS_ALLOC_CLEAN renamed to BCH_FS_CLEAN_SHUTDOWN
- new helper bch2_btree_interior_updates_flush(), which returns true if
it had to wait
- bch2_btree_flush_writes() now also returns true if there were btree
writes in flight
- __bch2_fs_read_only now checks if btree writes were in flight in the
shutdown loop: btree write completion does a transaction update, to
update the pointer in the parent node
- assert that !BCH_FS_CLEAN_SHUTDOWN in __bch2_trans_commit
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
hash_check_key() was incorrectly handling transaction restarts - switch
it to for_each_btree_key_norestart().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
If we allocate a buffer that's a bit bigger than necessary the
transaction commit path will be much less likely to have to reallocate -
which requires a transaction restart.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This adds bch2_btree_iter_peek_all_levels(), which returns keys from
every level of the btree - interior nodes included - in monotonically
increasing order, soon to be used by the backpointers check & repair
code.
- BTREE_ITER_ALL_LEVELS can now be passed to for_each_btree_key() to
iterate thusly, much like BTREE_ITER_SLOTS
- The existing algorithm in bch2_btree_iter_advance() doesn't work with
peek_all_levels(): we have to defer the actual advancing until the
next time we call peek, where we have the btree path traversed and
uptodate. So, we add an advanced bit to btree_iter; when
BTREE_ITER_ALL_LEVELS is set bch2_btree_iter_advanced() just marks
the iterator as advanced.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds two new helpers to btree_iter.c for changing the level of a
path up or down - to be used by the new
bch2_btree_iter_peek_all_levels().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
The new backpointers code will be using bch2_btree_iter_peek_slot() on
interior nodes - this patch updates peek_slot() to make that work.
- Pass the correct level to bch2_journal_keys_peek_slot()
- We should only set BTREE_ITER_CACHED or BTREE_ITER_WITH_KEY_CACHE
when using bch2_trans_iter_init(), not bch2_trans_node_iter_init()
- Update assertions
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Previously, btree_update_interior.c passed keys to bch2_trans_mark_*
that hadn't been fully initialized - they didn't have the key field
filled out, just the value.
With backpointers, we need to make sure keys are fully initialized
before marking them - because the backpointer points back to the
original key.
This patch tweaks the interior update paths to fix this.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
For backpointers, we'll need the full key location - that means btree_id
and btree level. This patch plumbs it through.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
We have string names for d_type; use it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This improves some of our warnings and assertions - they imply possible
filesystem inconsistencies, so they should be calling
bch2_fs_inconsistent().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This option was useful when the replicas mechism was new and still being
debugged, but hasn't been used in ages - let's delete it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
dirents
A user reported an error where we hit an assertion due to deleting a key
in an internal snapshot node, when deleting a dirent that points to a
nonexisting inode.
We try to avoid doing updates to keys for internal snapshot nodes, but
upon inspection of the places where we remove dirents in fsck it appears
BTREE_UPDATE_INTERNAL_SNAPSHOT_NODE is correct for all of them: either
the target dirent doesn't exist, or it's a directory with multiple
dirents pointing to it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
In journal replay, we weren't immediately dropping journal pins when we
start doing updates that ewern't from journal replay - leading to
journal reclaim getting stuck.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This adds error logging to a bunch of functions in fsck.c - in fsck,
reduntant error messages is probably better than not enough.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
If the dirent an inode points to doesn't exist, we shouldn't be
returning an error - just 0/false.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
When we detect a filesystem inconsistency, we should include the
relevent keys in the error message. This patch adds a parameter to pass
the key with the lru entry to bch2_lru_delete(), so that it can be
printed.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
When many journal replay keys have been overwritten,
bch2_journal_keys_peek() was taking excessively long to scan before it
found a key to return.
Fix this by introducing bch2_journal_keys_peek_upto() which takes a
parameter for the end of the range we want, so that we can terminate the
search much sooner, and replace all uses of bch2_journal_keys_peek()
with peek_upto() or peek_slot().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Error messages should always print out the full key when available -
this gives us a starting point when looking through the journal to debug
what went wrong.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
It's an error if a bucket is in state BCH_DATA_cached but not on the LRU
btree - i.e io_time[READ] == 0 - so, make sure it's set before adding
it.
Also, make some of the LRU code a bit clearer and more direct.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This gets us better error messages.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This patch updates bch2_open_buckets_to_text() to include the device and
bucket the open_bucket owns.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
In journal_entry_add(), we were repeatedly scanning the journal entries
radix tree to scan for old entries that can be freed, with O(n^2)
behaviour. This patch tweaks things to remember the previous last_seq,
so we don't have to scan for entries to free from the start.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
We start doing allocations before the GC thread is created, which means
we need to check for that to avoid a null ptr deref.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
We now pass a rw argument to .key_invalid methods so they can trigger
assertions for updates but not on existing keys. We shouldn't trigger
these extra assertions in journal replay - this patch changes the
transaction commit path accordingly.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
- We weren't clearing the LRU btree
- bch2_alloc_read() runs before bch2_check_alloc_key() deletes alloc
keys for devices/buckets that don't exists, so it needs to check for
that
- bch2_check_lrus() needs to check that buckets exists
- improve some error messages
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
These showed up when building for mips.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
New helper, for deleting extents.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
With backpointers this doesn't work anymore - backpointers always need
to be updated to point to the new extent position.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
We need to ensure that work structs in bch_fs always get initialized -
otherwise an error in filesystem initialization can pop a warning in the
workqueue code when we try to cancel a work struct that wasn't
initialized.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Previously, the journal read path used a linked list for storing the
journal entries we read from disk. But there's been a bug that's been
causing journal_flush_delay to incorrectly be set to 0, leading to far
more journal entries than is normal being written out, which then means
filesystems are no longer able to start due to the O(n^2) behaviour of
inserting into/searching that linked list.
Fix this by switching to a radix tree.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
When there weren't any keys in the journal there's no need to allocate
the buffer - but doing that causes a spurious -ENOMEM.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Previously, we were missing accounting for buckets in need_gc_gens and
need_discard states. This matters because buckets in those states need
other btree operations done before they can be used, so they can't be
conuted when checking current number of free buckets against the
allocation watermark.
Also, we weren't directly counting free buckets at all. Now, data type 0
== BCH_DATA_free, and free buckets are counted; this means we can get
rid of the separate (poorly defined) count of unavailable buckets.
This is a new on disk format version, with upgrade and fsck required for
the accounting changes.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
We're currently debugging an issue with discards not getting run; this
patch adds a manual trigger so we can then watch the tracepoint while it
runs.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
- We were failing to start topology repair, because we hadn't set the
superblock flag indicating it needed to run
- set_node_min() forget to update the btree node's key
- bch2_gc_alloc_reset() didn't reset data type, leading to inserting an
invalid key that was empty but had nonzero data type
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This gets us better error messages.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
.key_invalid is a better place for this assertion.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
In the future printbufs will be mempool-ified, so we shouldn't be using
more than one at a time if we don't have to.
This also fixes an extra trailing newline.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
We've been seeing this error in fsck and we weren't able to track down
where it came from - but now that .key_invalid methods take a rw
argument, we can safely check for this.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
In check_extents() and check_dirents(), we're working towards only
handling transaction restarts in one place, at the top level - but we're
not there yet. check_i_sectors() and check_subdir_count() handle
transaction restarts locally, which means the iterator for the
dirent/extent is left unlocked (should_be_locked == 0), leading to
asserts popping when we go to do updates.
This patch hacks around this for now, until we can delete the offending
code.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This adds a new parameter to .key_invalid() methods for whether the key
is being read or written; the idea being that methods can do more
aggressive checks when a key is newly created and being written, when we
wouldn't want to delete the key because of those checks.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
- Move checks for whether the device & bucket are valid from the
.key_invalid method to bch2_check_alloc_key(). This is because
.key_invalid() is called on keys that may no longer exist (post
journal replay), which is a problem when removing/resizing devices.
- We weren't checking the need_discard btree to ensure that every set
bucket has a corresponding alloc key. This refactors the code for
checking the freespace btree, so that it now checks both.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
