summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-09-30ARC: [plat*] enables MODULE*Vineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARCv2: fix local_save_flagsVineet Gupta
Commit d9676fa152c83b ("ARCv2: Enable LOCKDEP"), changed local_save_flags() to not return raw STATUS32 but encoded in the form such that it could be fed directly to CLRI/SETI instructions. However the STATUS32.E[] was not captured correctly as it corresponds to bits [4:1] in the register and not [3:0] Fixes: d9676fa152c83b ("ARCv2: Enable LOCKDEP") Cc: Evgeny Voevodin <evgeny.voevodin@intel.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARC: CONFIG_NODES_SHIFT fix default valuesNoam Camus
Seem like values assigned as absolute number and not and shift value, i.e. should be 0 for one node (2^0) and 1 for couple of nodes (2^1) Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARCv2: intc: Use kflag if STATUS32.IE must be resetYuriy Kolerov
In the end of "arc_init_IRQ" STATUS32.IE flag is going to be affected by "flag" instruction but "flag" never touches IE flag on ARCv2. So "kflag" instruction must be used instead of "flag". Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com> Cc: stable@vger.kernel.org #4.2+ Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARC: .exit.* sections can be discarded in .eh_frame regimeVineet Gupta
We used to keep the .exit.* sections as linker would fail in final link due to references from .debug_frame which itself could not be discardrd due to the forced "write,alloc" attributes for it. | LD init/built-in.o | `.exit.text' referenced in section `.debug_frame' of arch/arc/built-in.o: defined in discarded section `.exit.text' of arch/arc/built-in.o | Makefile:949: recipe for target 'vmlinux' failed With .debug_frame now retired, this hack is no longer needed. kernel binary is now a little bit smaller as well. closes STAR 9000549913 Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARC: dw2 unwind: enable cfi pseudo ops in string libVineet Gupta
This uses a new set of annoations viz. ENTRY_CFI/END_CFI to enabel cfi ops generation. Note that we didn't change the normal ENTRY/EXIT as we don't actually want unwind info in the trap/exception/interrutp handlers which use these, as unwinder then gets confused (it keeps recursing vs. stopping). Semantically these are leaf routines and unwinding should stop when it hits those routines. Before ------ 28.52% 1.19% 9929 hackbench libuClibc-1.0.17.so [.] __write_nocancel | ---__write_nocancel |--8.95%--EV_Trap | --8.25%--sys_write | |--3.93%--sock_write_iter ... |--2.62%--memset <==== [LEAF entry as no unwind info] ^^^^^^ After ----- 29.46% 1.24% 13622 hackbench libuClibc-1.0.17.so [.] __write_nocancel | ---__write_nocancel |--9.31%--EV_Trap | --8.62%--sys_write | |--4.17%--sock_write_iter ... |--6.19%--sys_write | --6.19%--sock_write_iter | unix_stream_sendmsg | |--1.62%--sock_alloc_send_pskb | |--0.89%--sock_def_readable | |--0.88%--_raw_spin_unlock_irqrestore | |--0.69%--memset | | ^^^^^^ <==== [now in proper callframe] | | | --0.52%--skb_copy_datagram_from_iter Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARC: dw2 unwind: add infrastructure for adding cfi pseudo ops to asmVineet Gupta
1. detect whether binutils supports the cfi pseudo ops 2. define conditional macros to generate the ops 3. define new ENTRY_CFI/END_CFI to annotate hand asm code. - Needed because we don't want to emit dwarf info in general ENTRY/END used by lowest level trap/exception/interrutp handlers as unwinder gets confused trying to unwind out of them. We want unwinder to instead stop when it hits onfo those routines - These provide minimal start/end cfi ops assuming routine doesn't touch stack memory/regs Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARC: entry: make ret_from_system_call local labelVineet Gupta
This essentially removes ENTRY() assembler annotation for this symbol since it didn't have a pairing END() This in ahead of introducing cfi pseudo ops in ENTRY/END which expects paired cfi_startproc/cfi_endproc | ../arch/arc/kernel/entry.S: Assembler messages: | ../arch/arc/kernel/entry.S:270: Error: previous CFI entry not closed (missing .cfi_endproc) | ../scripts/Makefile.build:326: recipe for target 'arch/arc/kernel/entry-arcv2.o' failed | make[4]: *** [arch/arc/kernel/entry-arcv2.o] Error 1 Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARC: dw2 unwind: don't force dwarf 2Vineet Gupta
In .debug_frame based unwinding regime, we used to force -gdwarf-2 since kernel unwinder only claimed to handle dwarf 2. This changed since commit 6d0d506012c93d ("ARC: dw2 unwind: Don't bail for CIE.version != 1") which added some support beyond dwarf 2, atleast to handle CIE != 1 The ill-effect of -gdwarf-2 is that it forces generation of .debug_* sections, which bloats loadable modules .ko files. For the curious, this doesn't affect vmlinx binary since linker script discards .debug_* but same discard is not yet implemented for modules. So it seems we can drop the -gdwarf-2 toggle, which should not be needed anyways given that we now use .eh_frame based unwinding. I've verified using GNU 2016.09-engo10 that the actual unwind info is not different with or w/o this toggle - but the debug_* sections are gone for good. before ----- arc-linux-readelf -S q_proc.ko-unwinding-1-eh_frame-switch | grep debug [15] .debug_info PROGBITS 00000000 000300 00d08d 00 0 0 1 [16] .rela.debug_info RELA 00000000 0162a0 008844 0c I 29 15 4 [17] .debug_abbrev PROGBITS 00000000 00d38d 0005f8 00 0 0 1 [18] .debug_loc PROGBITS 00000000 00d985 000070 00 0 0 1 [19] .rela.debug_loc RELA 00000000 01eae4 0000c0 0c I 29 18 4 [20] .debug_aranges PROGBITS 00000000 00d9f5 000040 00 0 0 1 [21] .rela.debug_arang RELA 00000000 01eba4 000030 0c I 29 20 4 [22] .debug_ranges PROGBITS 00000000 00da35 000018 00 0 0 1 [23] .rela.debug_range RELA 00000000 01ebd4 000030 0c I 29 22 4 [24] .debug_line PROGBITS 00000000 00da4d 000b5b 00 0 0 1 [25] .rela.debug_line RELA 00000000 01ec04 0000cc 0c I 29 24 4 [26] .debug_str PROGBITS 00000000 00e5a8 007831 01 MS 0 0 1 after ---- Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARC: dw2 unwind: switch to .eh_frame based unwindingVineet Gupta
So finally after almost 8 years of dealing with .debug_frame, we are finally switching to .eh_frame. The reason being stripped kernel binaries had non-functional unwinder as .debug_frame was gone. Also, in general .eh_frame seems more common way of doing unwinding. This also folds a revert of f52e126cc747 ("ARC: unwind: ensure that .debug_frame is generated (vs. .eh_frame)") to ensure that we start getting .eh_frame Reported-by: Daniel Mentz <danielmentz@google.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARC: dw2 unwind: factor CIE specifics for .eh_frame/.debug_frameVineet Gupta
This paves way for switching to .eh_frame based unwindiing Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARC: module: support R_ARC_32_PCREL relocationVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30arc: perf: Enable generic "cache-references" and "cache-misses" eventsAlexey Brodkin
We used to live with PERF_COUNT_HW_CACHE_REFERENCES and PERF_COUNT_HW_CACHE_REFERENCES not specified on ARC. Those events are actually aliases to 2 cache events that we do support and so this change sets "cache-reference" and "cache-misses" events in the same way as "L1-dcache-loads" and L1-dcache-load-misses. And while at it adding debug info for cache events as well as doing a subtle fix in HW events debug info - config value is much better represented by hex so we may see not only event index but as well other control bits set (if they exist). Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARC: [plat-eznps] add missing atomic_fetch_xxx operationsNoam Camus
Build brekeage since last changes to generic atomic operations. Added couple of missing macros which are now mandatory Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARCv2: Implement atomic64 based on LLOCKD/SCONDD instructionsVineet Gupta
ARCv2 ISA provides 64-bit exclusive load/stores so use them to implement the 64-bit atomics and elide the spinlock based generic 64-bit atomics boot tested with atomic64 self-test (and GOD bless the person who wrote them, I realized my inline assmebly is sloppy as hell) Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARCv2: Support dynamic peripheral address space in HS38 rel 3.0 coresVineet Gupta
HS release 3.0 provides for even more flexibility in specifying the volatile address space for mapping peripherals. With HS 2.1 @start was made flexible / programmable - with HS 3.0 even @end can be setup (vs. fixed to 0xFFFF_FFFF before). So add code to reflect that and while at it remove an unused struct defintion Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARCv2: identify HS38 rel 3.0 coresVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARCv2: Add support for ZeBu Emulation platform for HS coresVineet Gupta
The cool thing is that same kernel image can run on - nsim OSCI simulation platform - SDPlite FPGA setups Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30arc: Add "model" properly in device tree description of all boardsAlexey Brodkin
As it was discussed quite some time ago (see https://lkml.org/lkml/2015/11/5/862) it's a good practice to add "model" property in .dts. Moreover as per ePAPR "model" property is required and should look like "manufacturer,model" so we do here. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Jonas Gorski <jonas.gorski@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh@kernel.org> Cc: Christian Ruppert <christian.ruppert@alitech.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30netfilter: xt_hashlimit: Fix link error in 32bit arch because of 64bit divisionVishwanath Pai
Division of 64bit integers will cause linker error undefined reference to `__udivdi3'. Fix this by replacing divisions with div64_64 Fixes: 11d5f15723c9 ("netfilter: xt_hashlimit: Create revision 2 to ...") Signed-off-by: Vishwanath Pai <vpai@akamai.com> Acked-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-09-30netfilter: accommodate different kconfig in nf_set_hooks_headAaron Conole
When CONFIG_NETFILTER_INGRESS is unset (or no), we need to handle the request for registration properly by dropping the hook. This releases the entry during the set. Fixes: e3b37f11e6e4 ("netfilter: replace list_head with single linked list") Signed-off-by: Aaron Conole <aconole@bytheb.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-09-30netfilter: Fix potential null pointer dereferenceAaron Conole
It's possible for nf_hook_entry_head to return NULL. If two nf_unregister_net_hook calls happen simultaneously with a single hook entry in the list, both will enter the nf_hook_mutex critical section. The first will successfully delete the head, but the second will see this NULL pointer and attempt to dereference. This fix ensures that no null pointer dereference could occur when such a condition happens. Fixes: e3b37f11e6e4 ("netfilter: replace list_head with single linked list") Signed-off-by: Aaron Conole <aconole@bytheb.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-09-30DT: dmaengine: rcar-dmac: document R8A7743/5 supportSergei Shtylyov
Renesas RZ/G SoC also have the R-Car gen2/3 compatible DMA controllers. Document RZ/G1[ME] (also known as R8A774[35]) SoC bindings. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-30dmaengine: fsldma: Unmap region obtained by of_iomapArvind Yadav
Free memory mapping, if probe is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-30dmaengine: jz4780: fix resource leaks on error exit returnColin Ian King
In two cases when jz4780_dma_setup_hwdesc fails, there is a memory leak on the allocated desc and associated DMA pools on the error exit return path. Fix this by free'ing the resources before returning. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-30dma-debug: fix ia64 build, use PHYS_PFNNiklas Söderlund
kbuild test robot reports: lib/dma-debug.c: In function 'debug_dma_map_resource': >> lib/dma-debug.c:1541:16: error: implicit declaration of function '__phys_to_pfn' [-Werror=implicit-function-declaration] entry->pfn = __phys_to_pfn(addr); ^~~~~~~~~~~~~ ia64 does not provide __phys_to_pfn(), use the PHYS_PFN() alias. Fixes: 0e74b34dfc3318bf ("dma-debug: add support for resource mappings") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-30dmaengine: coh901318: fix integer overflow when shifting more than 32 placesColin Ian King
Currently U300_DMA_CHANNELS is set to 40, meaning that the shift of 1 can be more than 32 places, which leads to a 32 bit integer overflow. Fix this by using 1ULL instead of 1 before shifting it. Also add braces on the for-loop to keep with coding style conventions. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-30autofs: Fix automounts by using current_real_cred()->uidEric W. Biederman
Seth Forshee reports that in 4.8-rcN some automounts are failing because the requesting the automount changed. The relevant call path is: follow_automount() ->d_automount autofs4_d_automount autofs4_mount_wait autofs4_wait In autofs4_wait wq_uid and wq_gid are set to current_uid() and current_gid respectively. With follow_automount now overriding creds uid that we export to userspace changes and that breaks existing setups. To remove the regression set wq_uid and wq_gid from current_real_cred()->uid and current_real_cred()->gid respectively. This restores the current behavior as current->real_cred is identical to current->cred except when override creds are used. Cc: stable@vger.kernel.org Fixes: aeaa4a79ff6a ("fs: Call d_automount with the filesystems creds") Reported-by: Seth Forshee <seth.forshee@canonical.com> Tested-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-09-30mnt: Add a per mount namespace limit on the number of mountsEric W. Biederman
CAI Qian <caiqian@redhat.com> pointed out that the semantics of shared subtrees make it possible to create an exponentially increasing number of mounts in a mount namespace. mkdir /tmp/1 /tmp/2 mount --make-rshared / for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done Will create create 2^20 or 1048576 mounts, which is a practical problem as some people have managed to hit this by accident. As such CVE-2016-6213 was assigned. Ian Kent <raven@themaw.net> described the situation for autofs users as follows: > The number of mounts for direct mount maps is usually not very large because of > the way they are implemented, large direct mount maps can have performance > problems. There can be anywhere from a few (likely case a few hundred) to less > than 10000, plus mounts that have been triggered and not yet expired. > > Indirect mounts have one autofs mount at the root plus the number of mounts that > have been triggered and not yet expired. > > The number of autofs indirect map entries can range from a few to the common > case of several thousand and in rare cases up to between 30000 and 50000. I've > not heard of people with maps larger than 50000 entries. > > The larger the number of map entries the greater the possibility for a large > number of active mounts so it's not hard to expect cases of a 1000 or somewhat > more active mounts. So I am setting the default number of mounts allowed per mount namespace at 100,000. This is more than enough for any use case I know of, but small enough to quickly stop an exponential increase in mounts. Which should be perfect to catch misconfigurations and malfunctioning programs. For anyone who needs a higher limit this can be changed by writing to the new /proc/sys/fs/mount-max sysctl. Tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-09-30dmaengine: edma: avoid uninitialized variable useArnd Bergmann
If edma_read_slot() gets an invalid argument, it does not set a result, as found by "gcc -Wmaybe-uninitialized" drivers/dma/edma.c: In function 'dma_ccerr_handler': drivers/dma/edma.c:1499:21: error: 'p.a_b_cnt' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/dma/edma.c:1499:21: error: 'p.ccnt' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (p.a_b_cnt == 0 && p.ccnt == 0) { If we change the function to return an error in this case, we can handle the failure more gracefully and treat this the same way as a null slot that we already catch. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-30MAINTAINERS: Switch to kernel.org email address for Javi MerinoJavi Merino
Change my email address to my kernel.org account instead of the ARM one. Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-30f2fs: fix to avoid race condition when updating sbi flagChao Yu
Making updating of sbi flag atomic by using {test,set,clear}_bit, otherwise in concurrency scenario, the flag could be updated incorrectly. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-30f2fs: put directory inodes before checkpoint in roll-forward recoveryJaegeuk Kim
Before checkpoint, we'd be better drop any inodes. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-30f2fs: use crc and cp version to determine roll-forward recoveryJaegeuk Kim
Previously, we used cp_version only to detect recoverable dnodes. In order to avoid same garbage cp_version, we needed to truncate the next dnode during checkpoint, resulting in additional discard or data write. If we can distinguish this by using crc in addition to cp_version, we can remove this overhead. There is backward compatibility concern where it changes node_footer layout. So, this patch introduces a new checkpoint flag, CP_CRC_RECOVERY_FLAG, to detect new layout. New layout will be activated only when this flag is set. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-30Merge tag 'asoc-v4.9' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v4.9 Apart from the cleanups done by Morimoto-san this has very much been a driver focused release with very little generic change: - A big factoring out of the simple-card code to allow it to be shared more with the rcar generic card from Kuninori Morimoto. - Removal of some operations duplicated on the CODEC level, again by Kuninori Morimoto. - Lots more machine support for x86 systems. - New drivers for Nuvoton NAU88C10, Realtek RT5660 and RT5663.
2016-09-30Merge remote-tracking branches 'spi/topic/ti-qspi', 'spi/topic/tools', ↵Mark Brown
'spi/topic/txx9' and 'spi/topic/xlp' into spi-next
2016-09-30Merge remote-tracking branches 'spi/topic/rspi', 'spi/topic/sc18is602', ↵Mark Brown
'spi/topic/sh-msiof', 'spi/topic/spidev-test' and 'spi/topic/st-ssc4' into spi-next
2016-09-30Merge remote-tracking branches 'spi/topic/octeon', 'spi/topic/pic32-sqi', ↵Mark Brown
'spi/topic/pxa2xx' and 'spi/topic/qup' into spi-next
2016-09-30Merge remote-tracking branches 'spi/topic/fsl-espi', 'spi/topic/imx', ↵Mark Brown
'spi/topic/jcore', 'spi/topic/loopback' and 'spi/topic/meson' into spi-next
2016-09-30Merge remote-tracking branches 'spi/topic/bcm', 'spi/topic/dw' and ↵Mark Brown
'spi/topic/fsl-dspi' into spi-next
2016-09-30Merge remote-tracking branch 'spi/topic/dma' into spi-nextMark Brown
2016-09-30Merge remote-tracking branch 'spi/topic/core' into spi-nextMark Brown
2016-09-30Merge remote-tracking branch 'spi/fix/spidev' into spi-linusMark Brown
2016-09-30Merge remote-tracking branch 'regulator/topic/tps80031' into regulator-nextMark Brown
2016-09-30Merge remote-tracking branches 'regulator/topic/of', ↵Mark Brown
'regulator/topic/pv88080', 'regulator/topic/rk808', 'regulator/topic/set-voltage' and 'regulator/topic/tps65218' into regulator-next
2016-09-30Merge remote-tracking branches 'regulator/topic/bulk', ↵Mark Brown
'regulator/topic/dbx500', 'regulator/topic/hi6421', 'regulator/topic/load' and 'regulator/topic/ltc3676' into regulator-next
2016-09-30Merge remote-tracking branch 'regulator/fix/tps65910' into regulator-linusMark Brown
2016-09-30gpio: stmpe: use BIT() macroLinus Walleij
Avoid custom (1 << bits) shifting by consequently using the BIT() macro from <linux/bitops.h>. Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-30gpio: stmpe: forbid unused lines to be mapped as IRQsLinus Walleij
Exploit the new mechanism for masking off disallowed IRQs added by Mika Westerberg to properly manage the STMPE "norequest mask" to disallow also mapping said lines as IRQs. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-30PCI/AER: Fix aer_probe() kernel-doc commentCao jin
0516c8bcd252 ("PCI: PCIe portdrv: Simplily probe callback of service drivers") removed the "id" argument of aer_probe() but neglected to remove the kernel-doc comment. Update the comment. [bhelgaas: changelog] Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit (git 2.34.1) at 2025-09-12 15:50:08 +0000