| Age | Commit message (Collapse) | Author |
|---|
|
fixed statements should start on a tabstop
Signed-off-by: Darryl T. Agostinelli <dagostinelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
fixed block comments use * on subsequent lines
Signed-off-by: Darryl T. Agostinelli <dagostinelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
conflicts with LED namespace
Adding led support for phy causes namespace conflicts for some
phy drivers.
The rtl871 driver declared an enum for representing LED states. The enum
contains constant LED_OFF which conflicted with declaration found in
linux/leds.h. LED_OFF changed to LED_STATE_OFF
In order to avoid a possible future collision LED_ON was changed to
LED_STATE_ON as well.
Signed-off-by: Zach Brown <zach.brown@ni.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As suggested by Joe Perches, rx_sts is not
used anywhere and could be removed.
Signed-off-by: Martin Alonso <martin.alonso@zoho.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Private functions in ks7010_sdio.c can be declared static.
Fixes sparse warnings 'was not declared. Should it be static?'.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes the following checkpatch.pl warning in p80211netdev.h:
WARNING: line over 80 characters
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes the following checkpatch.pl warning in p80211netdev.h:
WARNING: do not add new typedefs
It applies for typedef p80211_frmrx_t
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes the following checkpatch.pl warning in p80211netdev.h:
WARNING: do not add new typedefs
It applies for typedef netdevice_t
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Example corrected output:
$ pwd
/sys/bus/visorbus/devices/visorbus1
$ cat client_bus_info
Client device / client driver info for s-Par Console partition
(vbus #1):
chipset visorchipset kernel ver. 4.8.0-rc6-ARCH+
clientbus visorbus kernel ver. 4.8.0-rc6-ARCH+
[2]keyboard visorinput kernel ver. 4.8.0-rc6-ARCH+
[3]mouse visorinput kernel ver. 4.8.0-rc6-ARCH+
$ cat ../visorbus2/client_bus_info
Client device / client driver info for s-Par IOVM partition
(vbus #2):
chipset visorchipset kernel ver. 4.8.0-rc6-ARCH+
clientbus visorbus kernel ver. 4.8.0-rc6-ARCH+
[0]ultravnic visornic kernel ver. 4.8.0-rc6-ARCH+
[1]ultravnic visornic kernel ver. 4.8.0-rc6-ARCH+
[2]sparvhba visorhba kernel ver. 4.8.0-rc6-ARCH+
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Previously, the lines describing devices controlled by the visorinput,
visornic, and visorhba drivers (keyboard, mouse, ultravnic, sparvhba) would
be missing from the vbus channel header. This is important info that is
collected as part of s-Par livedumps, and can be examined via
/sys/bus/visorbus/devices/visorbus<n>/client_bus_info, e.g.:
$ pwd
/sys/bus/visorbus/devices
$ cat visorbus1/client_bus_info
Client device / client driver info for s-Par Console eartition
(vbus #4294967295):
chipset visorchipset kernel ver. 4.8.0-rc6-ARCH+
clientbus visorbus kernel ver. 4.8.0-rc6-ARCH+
-> [2]keyboard visorinput kernel ver. 4.8.0-rc6-ARCH+
-> [3]mouse visorinput kernel ver. 4.8.0-rc6-ARCH+
$ cat visorbus2/client_bus_info
Client device / client driver info for s-Par IOVM eartition
(vbus #4294967295):
chipset visorchipset kernel ver. 4.8.0-rc6-ARCH+
clientbus visorbus kernel ver. 4.8.0-rc6-ARCH+
-> [0]ultravnic visornic kernel ver. 4.8.0-rc6-ARCH+
-> [1]ultravnic visornic kernel ver. 4.8.0-rc6-ARCH+
-> [2]sparvhba visorhba kernel ver. 4.8.0-rc6-ARCH+
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Several implicit unsigned --> signed int conversions were corrected.
No runtime effects were observed here, nevertheless implicit conversions
between integral types can lead to unexpected behavior.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the created tc actions list is reversed against the order
set by the user.
Change the actions list order to be the same as was set by the user.
This patch doesn't affect dump actions behavior.
For dumping, action->order parameter is used so the list order doesn't
matter.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for the first two members of the Renesas RZ/G family, RZ/G1M/E
(also known as R8A7743/5). The Ether core is the same as in the R-Car gen2
SoCs, so will share the code/data with them...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jiri Pirko says:
====================
fib offload: switch to notifier
The goal of this patchset is to allow driver to propagate all prefixes
configured in kernel down HW. This is necessary for routing to work
as expected. If we don't do that HW might forward prefixes known to kernel
incorrectly. Take an example when default route is set in switch HW and there
is an IP address set on a management (non-switch) port.
Currently, only FIB entries related to the switch port netdev are
offloaded using switchdev ops. This model is not extendable so the
first patch introduces a replacement: notifier to propagate FIB entry
additions and removals to whoever is interested.
The second patch introduces couple of helpers to deal with RTNH_F_OFFLOAD
flags. Currently it is set in switchdev core. There the assumption is
that only one offload device exists. But for FIB notifier, we assume
multiple offload devices. So the patch introduces a per FIB entry
reference counter and helpers use it in order to achieve this:
0 means RTNH_F_OFFLOAD is not set, no device offloads this entry
n means RTNH_F_OFFLOAD is set and the entry is offloaded by n devices
Patches 3 and 4 convert mlxsw and rocker to adopt this new way, registering
one notifier block for each asic instance. Both of these patches also
implement internal "abort" mechanism.
Using switchdev ops, "abort" is called by switchdev core whenever there is
an error during FIB entry add offload. This leads to removal of all
offloaded entries on system by fib_trie code.
Now the new notifier assumes the driver takes care of the abort action.
Here's why:
1) The fact that one HW cannot offload an entry does not mean that the
others can't do it. So let only one entity to abort and leave the rest
to work happily.
2) The driver knows what to in order to properly abort. For example,
currently abort is broken for mlxsw, as for Spectrum there is a need
to set 0.0.0.0/0 trap in RALUE register.
The fifth patch removes the old, no longer used FIB offload infrastructure.
The last patch reflects the changes into switchdev documentation file.
---
v2->v3:
-patch 3/6
-fixed offload inc/dec to be done in fib4_entry_init/fini and only
in case !trap as suggested by Ido
v1->v2:
-patch 3/6:
-fixed lpm tree setup and binding for abort and pointed out by Ido
-do nexthop checks as suggested by Ido
-fix use after free during abort
-patch 6/6:
-fixed texts as suggested by Ido
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is to reflect the change of FIB offload infrastructure from
switchdev objects to FIB notifier.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since this is now taken care of by FIB notifier, remove the code, with
all unused dependencies.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Until now, in order to offload a FIB entry to HW we use switchdev op.
Use the newly introduced FIB notifier infrasturucture to process
FIB entries to offload the in HW.
Abort mechanism is now handled within the rocker driver.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Until now, in order to offload a FIB entry to HW we use switchdev op.
However that has limits. Mainly in case we need to make the HW aware of
all route prefixes configured in kernel. HW needs to know those in order
to properly trap appropriate packets and pass the to kernel to do
the forwarding. Abort mechanism is now handled within the mlxsw driver.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These helpers are to be used in case someone offloads the FIB entry. The
result is that if the entry is offloaded to at least one device, the
offload flag is set.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This allows to pass information about added/deleted FIB entries/rules to
whoever is interested. This is done in a very similar way as devinet
notifies address additions/removals.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Trival fix, dev_err messages are missing a \n, so add it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The current code use the encapsulation key id value as the mask of that
parameter which is wrong. Fix that by using a full mask.
Fixes: bc3103f1ed40 ('net/sched: cls_flower: Classify packet in ip tunnels')
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Amir Vadai <amir@vadai.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 9f12cea96f47f98d612a0a0b84f950a0163731bf.
Mark writes:
Unfortunately, this patch will result in erroneous stack traces
on some architectures. Sorry about this; I should have verified
this more thoroughly before sending the series out.
Please drop the patch at your earliest convenience.
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
An "unnecessary" 'else' was removed due to complains from checkpatch.pl
as it is preceded by a 'return', however the 'else' branch is necessary
as an earlier branch of the 'if' falls through. By removing the 'else',
that route now hits the 'break' and the 'while' loop exits prematurely.
This commit reverts that change and puts the original 'else' back in
place.
Signed-off-by: Matthew Kilgore <mattkilgore12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
The udl damage handler is supposed to render 'height' lines, but its
iterator has an obvious typo that makes it miss most lines if the
rectangle does not cover 0/0.
Fix the damage handler to correctly render all lines.
This is a fallout from:
commit e375882406d0cc24030746638592004755ed4ae0
Author: Noralf Trønnes <noralf@tronnes.org>
Date: Thu Apr 28 17:18:37 2016 +0200
drm/udl: Use drm_fb_helper deferred_io support
Tested-by: poma <poma@gmail.com>
Cc: stable@vger.kernel.org # 4.7+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
To get more coverage, enable COMPILE_TEST for this driver.
When compile testing eDMA or omap-dma, select also the ti-dma-crossbar so
it is also covered by the compile testing.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
To get more coverage, enable COMPILE_TEST for this driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
To get more coverage, enable COMPILE_TEST for this driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
Use pointers to static constant variables for crossbar type and for DMA
offset configuration.
Fixes compiler warnings on 64bit architectures:
drivers/dma/ti-dma-crossbar.c: In function ‘ti_dra7_xbar_probe’:
drivers/dma/ti-dma-crossbar.c:398:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
xbar->dma_offset = (u32)match->data;
^
drivers/dma/ti-dma-crossbar.c: In function ‘ti_dma_xbar_probe’:
drivers/dma/ti-dma-crossbar.c:431:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
switch ((u32)match->data) {
^
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
The correct type is int and not for the third parameter of
of_find_property().
Fixes compilation for 64bit architectures (x86_64, aarch64).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
The DMAengine driver for omap-dma use three function calls from the
plat-omap legacy driver. When the DMAengine driver is built when ARCH_OMAP
is not set, the compilation will fail due to missing symbols.
Add empty inline functions to allow the DMAengine driver to be compiled
with COMPILE_TEST.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
The clear_bits() helper is not used by the driver so it can be removed.
powerpc architecture defines the set_bits() in
arch/powerpc/include/asm/bitops.h which results failed compile testing on
powerpc architecture:
>> drivers/dma/edma.c:415:20: error: conflicting types for 'set_bits'
static inline void set_bits(int offset, int len, unsigned long *p)
^~~~~~~~
In file included from include/linux/bitops.h:36:0,
from include/linux/kernel.h:10,
from include/linux/list.h:8,
from include/linux/kobject.h:20,
from include/linux/device.h:17,
from include/linux/dmaengine.h:20,
from drivers/dma/edma.c:16:
arch/powerpc/include/asm/bitops.h:75:14: note: previous definition of 'set_bits' was here
DEFINE_BITOP(set_bits, or, "")
^
arch/powerpc/include/asm/bitops.h:58:24: note: in definition of macro 'DEFINE_BITOP'
static __inline__ void fn(unsigned long mask, \
^~
>> drivers/dma/edma.c:421:20: error: conflicting types for 'clear_bits'
static inline void clear_bits(int offset, int len, unsigned long *p)
^~~~~~~~~~
In file included from include/linux/bitops.h:36:0,
from include/linux/kernel.h:10,
from include/linux/list.h:8,
from include/linux/kobject.h:20,
from include/linux/device.h:17,
from include/linux/dmaengine.h:20,
from drivers/dma/edma.c:16:
arch/powerpc/include/asm/bitops.h:76:14: note: previous definition of 'clear_bits' was here
DEFINE_BITOP(clear_bits, andc, "")
^
arch/powerpc/include/asm/bitops.h:58:24: note: in definition of macro 'DEFINE_BITOP'
static __inline__ void fn(unsigned long mask, \
^~
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
The correct type is int and not for the third parameter of
of_find_property().
Fixes compilation for 64bit architectures (x86_64, aarch64).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
Use pointers to static constant variables for eDMA binding
type (legacy vs TPCC).
Fixes the following warning when compiling the driver for 64bit
architectures (x86_64 for example):
drivers/dma/edma.c:2185:16: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
if (match && (u32)match->data == EDMA_BINDING_TPCC)
^
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
1GbE Intel Wired LAN Driver Updates 2016-09-27
This series contains updates to igb and igbvf.
Wei Yongjun makes a function static to shut up sparse.
Todd bumps the igb and igbvf version, which is long overdue.
Jake fixes an issue where the PPS SYS_WRAP interrupt was not re-enabled
after a reset, which resulted in disabling of the PPS signaling.
v2: dropped patch 5 of the original series, since the PCI quirk patch
needs to be reworked by Alex and Sasha to address issues that Bjorn
Helgaas and Alex Williamson brought up.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MODULE_DEVICE_TABLE() were missing from the driver for the of_device_id
structures.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
put_cpu_var takes the percpu data, not the data returned from
get_cpu_var.
This doesn't change the behavior.
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
put_cpu_var takes the percpu data, not the data returned from
get_cpu_var.
This doesn't change the behavior.
Cc: Tejun Heo <tj@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a reset occurs, the PPS SYS_WRAP interrupt was not re-enabled which
resulted in disabling of the PPS signaling. Fix this by recording when
the interrupt is on and ensuring that we re-enable it every time we
reset.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Bump igb version to match other igb drivers.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Bump version to match other igbvf drivers.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Fixes the following sparse warning:
drivers/net/ethernet/intel/igb/igb_ethtool.c:2707:5: warning:
symbol 'igb_rxnfc_write_vlan_prio_filter' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
nouveau: couple of fixes.
* 'linux-4.8' of git://github.com/skeggsb/linux:
drm/nouveau: Revert "bus: remove cpu_coherent flag"
drm/nouveau/fifo/nv04: avoid ramht race against cookie insertion
|
|
into drm-fixes
two amd fixes.
* 'drm-fixes-4.8' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/si/dpm: add workaround for for Jet parts
drm/amdgpu: disable CRTCs before teardown
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"Three late fixes for cgroup: Two cpuset ones, one trivial and the
other pretty obscure, and a cgroup core fix for a bug which impacts
cgroup v2 namespace users"
* 'for-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fix invalid controller enable rejections with cgroup namespace
cpuset: fix non static symbol warning
cpuset: handle race between CPU hotplug and cpuset_hotplug_work
|
|
Save the position of the error reporting capability so it doesn't need to
be rediscovered during error handling.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Lukas Wunner <lukas@wunner.de>
|
|
When handling AER events, we previously allocated a struct aer_err_info,
processed the error, and freed the struct. But aer_isr_one_error() is
serialized by rpc_mutex, so we never need more than one copy of the struct,
and the struct is only about 70 bytes, so we're not saving much by
allocating it dynamically.
Embed a struct aer_err_info directly in struct aer_rpc, which is allocated
at probe-time by aer_probe().
[bhelgaas: changelog]
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Change '/sys/bus/event_sources' to the correct path which is
'/sys/bus/event_source'.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If the vgic hasn't been created and initialized, we shouldn't attempt to
look at its data structures or flush/sync anything to the GIC hardware.
This fixes an issue reported by Alexander Graf when using a userspace
irqchip.
Fixes: 0919e84c0fc1 ("KVM: arm/arm64: vgic-new: Add IRQ sync/flush framework")
Cc: stable@vger.kernel.org
Reported-by: Alexander Graf <agraf@suse.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
|
