| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This is the usual mix of updates for drivers that are used on (mostly
ARM) SoCs with no other top-level subsystem tree, including:
- The SCMI firmware subsystem gains support for version 3.2 of the
specification and updates to the notification code
- Feature updates for Tegra and Qualcomm platforms for added hardware
support
- A number of platforms get soc_device additions for identifying
newly added chips from Renesas, Qualcomm, Mediatek and Google
- Trivial improvements for firmware and memory drivers amongst
others, in particular 'const' annotations throughout multiple
subsystems"
* tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
tee: make tee_bus_type const
soc: qcom: aoss: add missing kerneldoc for qmp members
soc: qcom: geni-se: drop unused kerneldoc struct geni_wrapper param
soc: qcom: spm: fix building with CONFIG_REGULATOR=n
bus: ti-sysc: constify the struct device_type usage
memory: stm32-fmc2-ebi: keep power domain on
memory: stm32-fmc2-ebi: add MP25 RIF support
memory: stm32-fmc2-ebi: add MP25 support
memory: stm32-fmc2-ebi: check regmap_read return value
dt-bindings: memory-controller: st,stm32: add MP25 support
dt-bindings: bus: imx-weim: convert to YAML
watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
MAINTAINERS: Update SCMI entry with HWMON driver
MAINTAINERS: samsung: gs101: match patches touching Google Tensor SoC
memory: tegra: Fix indentation
memory: tegra: Add BPMP and ICC info for DLA clients
memory: tegra: Correct DLA client names
dt-bindings: memory: renesas,rpc-if: Document R-Car V4M support
firmware: arm_scmi: Update the supported clock protocol version
...
|
|
Pull SoC device tree updates from Arnd Bergmann:
"There is very little going on with new SoC support this time, all the
new chips are variations of others that we already support, and they
are all based on ARMv8 cores:
- Mediatek MT7981B (Filogic 820) and MT7988A (Filogic 880) are
networking SoCs designed to be used in wireless routers, similar to
the already supported MT7986A (Filogic 830).
- NXP i.MX8DXP is a variant of i.MX8QXP, with two CPU cores less.
These are used in many embedded and industrial applications.
- Renesas R8A779G2 (R-Car V4H ES2.0) and R8A779H0 (R-Car V4M) are
automotive SoCs.
- TI J722S is another automotive variant of its K3 family, related to
the AM62 series.
There are a total of 7 new arm32 machines and 45 arm64 ones, including
- Two Android phones based on the old Tegra30 chip
- Two machines using Cortex-A53 SoCs from Allwinner, a mini PC and a
SoM development board
- A set-top box using Amlogic Meson G12A S905X2
- Eight embedded board using NXP i.MX6/8/9
- Three machines using Mediatek network router chips
- Ten Chromebooks, all based on Mediatek MT8186
- One development board based on Mediatek MT8395 (Genio 1200)
- Seven tablets and phones based on Qualcomm SoCs, most of them from
Samsung.
- A third development board for Qualcomm SM8550 (Snapdragon 8 Gen 2)
- Three variants of the "White Hawk" board for Renesas automotive
SoCs
- Ten Rockchips RK35xx based machines, including NAS, Tablet, Game
console and industrial form factors.
- Three evaluation boards for TI K3 based SoCs
The other changes are mainly the usual feature additions for existing
hardware, cleanups, and dtc compile time fixes. One notable change is
the inclusion of PowerVR SGX GPU nodes on TI SoCs"
* tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (824 commits)
riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig
riscv: dts: starfive: jh7100: fix root clock names
ARM: dts: samsung: exynos4412: decrease memory to account for unusable region
arm64: dts: qcom: sm8250-xiaomi-elish: set rotation
arm64: dts: qcom: sm8650: Fix SPMI channels size
arm64: dts: qcom: sm8550: Fix SPMI channels size
arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure
arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector
dt-bindings: soc: renesas: renesas-soc: Add pattern for gray-hawk
dtc: Enable dtc interrupt_provider check
arm64: dts: st: add video encoder support to stm32mp255
arm64: dts: st: add video decoder support to stm32mp255
ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk
ARM: dts: stm32: enable CRC on stm32mp135f-dk
ARM: dts: stm32: add CRC on stm32mp131
ARM: dts: add stm32f769-disco-mb1166-reva09
ARM: dts: stm32: add display support on stm32f769-disco
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
ARM: dts: stm32: add DSI support on stm32f769
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Make the Zorro bus type constant
- defconfig updates
* tag 'm68k-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: defconfig: Update defconfigs for v6.8-rc1
zorro: Make zorro_bus_type const
|
|
- Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and separate
files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150, SM8250, SM8350,
SM8450, SM8550 for easier reviewing (Krzysztof Kozlowski)
- Allow 'required-opps' DT property for SoCs that require a minimum
performance level for the power domain (Johan Hovold)
- Remove requirement for 'msi-map-mask' DT property since it depends on how
MSIs are mapped (Johan Hovold)
- Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because their PHY
configuration isn't tuned for L0s, which results in many Correctable
Errors (Johan Hovold)
- Enable BDF to SID translation by disabling bypass mode (Manivannan
Sadhasivam)
- Add DT binding and driver support for X1E80100 (Abel Vesa)
* pci/controller/qcom:
PCI: qcom: Add X1E80100 PCIe support
dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
PCI: qcom: Enable BDF to SID translation properly
PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p
dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
dt-bindings: PCI: qcom: Allow 'required-opps'
dt-bindings: PCI: qcom,pcie-sa8775p: Move SA8775p to dedicated schema
dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to dedicated schema
dt-bindings: PCI: qcom,pcie-sc8180x: Move SC8180X to dedicated schema
dt-bindings: PCI: qcom,pcie-sc8280xp: Move SC8280XP to dedicated schema
dt-bindings: PCI: qcom,pcie-sm8350: Move SM8350 to dedicated schema
dt-bindings: PCI: qcom,pcie-sm8150: Move SM8150 to dedicated schema
dt-bindings: PCI: qcom,pcie-sm8250: Move SM8250 to dedicated schema
dt-bindings: PCI: qcom,pcie-sm8450: Move SM8450 to dedicated schema
dt-bindings: PCI: qcom,pcie-sm8550: Move SM8550 to dedicated schema
|
|
- Replace variant switches with drvdata clock descriptions and clk_bulk API
(Frank Li)
- Replace variant switches with drvdata PHY flag for devm_phy_get() (Frank
Li)
- Replace variant switches with drvdata HAS_RESET flags for handling resets
(Frank Li)
- Replace variant switches with drvdata for LTSSM control bits (Frank Li)
- Replace variant switches with drvdata for controller Root Complex vs
Endpoint modes (Frank Li)
- Replace variant switches with drvdata .init_phy() callback pointers
(Frank Li)
- Drop dt-binding redundant duplicate clock check (Frank Li)
- reg/reg-name (Frank Li)
- Drop addr_space retrieval code since dw_pcie_ep_init() already does it
(Frank Li)
- Add epc_features to drvdata (Frank Li)
- Add iMX95 Root Complex and Endpoint support and dt-binding compatible
strings (Frank Li)
* pci/controller/imx:
PCI: imx6: Add iMX95 Endpoint (EP) support
dt-bindings: imx6q-pcie: Add iMX95 pcie endpoint compatible string
PCI: imx6: Add epc_features in imx6_pcie_drvdata
PCI: imx6: Clean up addr_space retrieval code
PCI: imx6: Add iMX95 PCIe Root Complex support
dt-bindings: imx6q-pcie: Add imx95 pcie compatible string
dt-bindings: imx6q-pcie: Restruct reg and reg-name
dt-bindings: imx6q-pcie: Clean up duplicate clocks check
PCI: imx6: Simplify switch-case logic by introducing init_phy() callback
PCI: imx6: Simplify configure_type() by using mode_off and mode_mask
PCI: imx6: Simplify ltssm_enable() by using ltssm_off and ltssm_mask
PCI: imx6: Simplify reset handling by using *_FLAG_HAS_*_RESET
PCI: imx6: Simplify PHY handling by using IMX6_PCIE_FLAG_HAS_PHYDRV
PCI: imx6: Simplify clock handling by using clk_bulk*() function
|
|
- Fix ring buffer size at 16KB (not 4 pages), which reduces memory usage by
128KBytes with 64KB pages (Michael Kelley)
* pci/controller/hyperv:
PCI: hv: Fix ring buffer size calculation
|
|
- Fall back to allocating 64-bit MSI DMA address if unable to allocate a
32-bit address (Ajay Agarwal)
* pci/controller/dwc:
PCI: dwc: endpoint: Fix advertised resizable BAR size
PCI: dwc: Strengthen the MSI address allocation logic
|
|
- Clear the ARI Capability Next Function Number of the last function
(Jasko-EXT Wojciech)
* pci/controller/cadence:
PCI: cadence: Clear the ARI Capability Next Function Number of the last function
|
|
- Fix polling for MDIO write completion, which previously used the wrong
access width so it always indicated "completed" (Jonathan Bell)
* pci/controller/broadcom:
PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling
|
|
- Make pcie_port_bus_type const (Ricardo B. Marliere)
* pci/misc:
PCI: Make pcie_port_bus_type const
|
|
- Make pci_epf_bus_type const (Ricardo B. Marliere)
- Update pci_epf_alloc_space() interface and move bar_fixed_size[] testing
from pci_epf_test_alloc_space() and pci_epf_configure_bar() into it
(Niklas Cassel)
- Drop redundant size & alignment checking from epf_ntb_db_bar_init() since
pci_epf_alloc_space() already does it (Niklas Cassel)
- Fix ntb_register_device() name leak in error path (Yang Yingliang)
- Return actual error code for pci_vntb_probe() failure (Yang Yingliang)
- Prefix sysfs function names with "pci_epf_mhi_", e.g.,
"/sys/kernel/config/functions/pci_epf_mhi_sdx55", to leave room for other
endpoint functions (Manivannan Sadhasivam)
- Add EPF MHI support for SA8775P SoC (Mrinmay Sarkar)
- Consolidate endpoint BAR hardware description in new struct
pci_epc_bar_desc (Niklas Cassel)
- Drop only_64bit on reserved BARs (Niklas Cassel)
* pci/endpoint:
PCI: endpoint: Drop only_64bit on reserved BARs
PCI: endpoint: Clean up hardware description for BARs
PCI: epf-mhi: Add support for SA8775P SoC
PCI: epf-mhi: Add "pci_epf_mhi_" prefix to the function names
PCI: epf-vntb: Return actual error code during pci_vntb_probe() failure
NTB: fix possible name leak in ntb_register_device()
PCI: endpoint: pci-epf-vntb: Remove superfluous checks for pci_epf_alloc_space() API
PCI: endpoint: pci-epf-test: Remove superfluous checks for pci_epf_alloc_space() API
PCI: endpoint: Improve pci_epf_alloc_space() API
PCI: endpoint: Refactor pci_epf_alloc_space() API
PCI: endpoint: Make pci_epf_bus_type const
|
|
- Avoid Secondary Bus Reset on the LSI / Agere FW643, which allows it to be
assigned to VMs with VFIO, at the cost of leaking FW643 state between VMs
(Edmund Raile)
* pci/virtualization:
PCI: Mark LSI FW643 to avoid bus reset
|
|
- Compile pci-sysfs.c only if CONFIG_SYSFS=y, which reduces kernel size by
~120KB when it's disabled (Lukas Wunner)
- Remove obsolete pci_cleanup_rom() declaration (Lukas Wunner)
- Rework pci_dev_resource_resize_attr(n) macros to call a function instead
of duplicating most of the body, which saves about 2.5KB of text (Ilpo
Järvinen)
* pci/sysfs:
PCI/sysfs: Demacrofy pci_dev_resource_resize_attr(n) functions
PCI: Remove obsolete pci_cleanup_rom() declaration
PCI/sysfs: Compile pci-sysfs.c only if CONFIG_SYSFS=y
# Conflicts:
# drivers/pci/Makefile
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Various virtual vs physical address usage fixes
- Fix error handling in Processor Activity Instrumentation device
driver, and export number of counters with a sysfs file
- Allow for multiple events when Processor Activity Instrumentation
counters are monitored in system wide sampling
- Change multiplier and shift values of the Time-of-Day clock source to
improve steering precision
- Remove a couple of unneeded GFP_DMA flags from allocations
- Disable mmap alignment if randomize_va_space is also disabled, to
avoid a too small heap
- Various changes to allow s390 to be compiled with LLVM=1, since
ld.lld and llvm-objcopy will have proper s390 support witch clang 19
- Add __uninitialized macro to Compiler Attributes. This is helpful
with s390's FPU code where some users have up to 520 byte stack
frames. Clearing such stack frames (if INIT_STACK_ALL_PATTERN or
INIT_STACK_ALL_ZERO is enabled) before they are used contradicts the
intention (performance improvement) of such code sections.
- Convert switch_to() to an out-of-line function, and use the generic
switch_to header file
- Replace the usage of s390's debug feature with pr_debug() calls
within the zcrypt device driver
- Improve hotplug support of the Adjunct Processor device driver
- Improve retry handling in the zcrypt device driver
- Various changes to the in-kernel FPU code:
- Make in-kernel FPU sections preemptible
- Convert various larger inline assemblies and assembler files to
C, mainly by using singe instruction inline assemblies. This
increases readability, but also allows makes it easier to add
proper instrumentation hooks
- Cleanup of the header files
- Provide fast variants of csum_partial() and
csum_partial_copy_nocheck() based on vector instructions
- Introduce and use a lock to synchronize accesses to zpci device data
structures to avoid inconsistent states caused by concurrent accesses
- Compile the kernel without -fPIE. This addresses the following
problems if the kernel is compiled with -fPIE:
- It uses dynamic symbols (.dynsym), for which the linker refuses
to allow more than 64k sections. This can break features which
use '-ffunction-sections' and '-fdata-sections', including
kpatch-build and function granular KASLR
- It unnecessarily uses GOT relocations, adding an extra layer of
indirection for many memory accesses
- Fix shared_cpu_list for CPU private L2 caches, which incorrectly were
reported as globally shared
* tag 's390-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (117 commits)
s390/tools: handle rela R_390_GOTPCDBL/R_390_GOTOFF64
s390/cache: prevent rebuild of shared_cpu_list
s390/crypto: remove retry loop with sleep from PAES pkey invocation
s390/pkey: improve pkey retry behavior
s390/zcrypt: improve zcrypt retry behavior
s390/zcrypt: introduce retries on in-kernel send CPRB functions
s390/ap: introduce mutex to lock the AP bus scan
s390/ap: rework ap_scan_bus() to return true on config change
s390/ap: clarify AP scan bus related functions and variables
s390/ap: rearm APQNs bindings complete completion
s390/configs: increase number of LOCKDEP_BITS
s390/vfio-ap: handle hardware checkstop state on queue reset operation
s390/pai: change sampling event assignment for PMU device driver
s390/boot: fix minor comment style damages
s390/boot: do not check for zero-termination relocation entry
s390/boot: make type of __vmlinux_relocs_64_start|end consistent
s390/boot: sanitize kaslr_adjust_relocs() function prototype
s390/boot: simplify GOT handling
s390: vmlinux.lds.S: fix .got.plt assertion
s390/boot: workaround current 'llvm-objdump -t -j ...' behavior
...
|
|
- Fix error handling path in switchtec_pci_probe() (Christophe JAILLET)
* pci/switchtec:
PCI: switchtec: Fix an error handling path in switchtec_pci_probe()
|
|
- Disable use of D3cold on Asus B1400 PCI-NVMe bridges because some BIOSes
can't power them back on, replacing a more general ACPI sleep quirk
(Daniel Drake)
- Allow runtime PM when the driver enables it but doesn't need any runtime
PM callbacks (Raag Jadav)
- Drain runtime-idle callbacks before driver removal to avoid races between
.remove() and .runtime_idle(), which caused intermittent page faults when
the rtsx .runtime_idle() accessed registers that its .remove() had
already unmapped (Rafael J. Wysocki)
* pci/pm:
PCI/PM: Drain runtime-idle callbacks before driver removal
PCI/PM: Allow runtime PM with no PM callbacks at all
Revert "ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default"
PCI: Disable D3cold on Asus B1400 PCI-NVMe bridge
|
|
- Fix a sleeping issue in a RCU read section (Christophe JAILLET)
* pci/p2pdma:
PCI/P2PDMA: Fix a sleeping issue in a RCU read section
|
|
- Collect interrupt-related code in irq.c (Ilpo Järvinen)
- Mark 3ware-9650SE Root Port Extended Tags as broken (Jörg Wedekind)
* pci/enumeration:
PCI: Mark 3ware-9650SE Root Port Extended Tags as broken
PCI: Place interrupt related code into irq.c
# Conflicts:
# drivers/pci/Makefile
|
|
- After a DPC event, print all logged TLP Prefixes instead of printing the
first prefix several times (Ilpo Järvinen)
- Ignore the expected Surprise Down error that may cause a DPC event when
hot-removing a device (Smita Koralahalli)
- Add an RP PIO log size quirk for Intel Raptor Lake Root Ports, which
still don't advertise the correct log size, which prevented logging of RP
PIO Log registers when DPC is triggered (Paul Menzel)
* pci/dpc:
PCI/DPC: Quirk PIO log size for Intel Raptor Lake Root Ports
PCI/DPC: Ignore Surprise Down error on hot removal
PCI/DPC: Print all TLP Prefixes, not just the first
|
|
- Unmap MMIO mappings in pci_iounmap() to avoid a leak when
ARCH_HAS_GENERIC_IOPORT_MAP is defined (Philipp Stanner)
- Move pci_iomap.c to drivers/pci/ since it's all PCI-related (Philipp
Stanner)
- Move other PCI-related devres code from lib/devres.c to drivers/pci/
(Philipp Stanner)
- Move other devres code from pci.c to devres.c (Philipp Stanner)
* pci/devres:
PCI: Move devres code from pci.c to devres.c
PCI: Move PCI-specific devres code to drivers/pci/
PCI: Move pci_iomap.c to drivers/pci/
pci_iounmap(): Fix MMIO mapping leak
|
|
- Collect ASPM-related code into aspm.c (David E. Box)
- Save and restore ASPM L1 PM Substates configuration so these states
continue working after suspend/resume (David E. Box)
- Move the ASPM L1.2-related LTR save/restore next to the ASPM save/restore
(David E. Box)
- Move the required L1 disable before L1 Substate configuration into
pci_restore_aspm_l1ss_state() (Bjorn Helgaas)
- Update save_save when ASPM config is changed, so a .slot_reset() during
error recovery restores the changed config, not the .probe()-time config
(Vidya Sagar)
* pci/aspm:
PCI/ASPM: Update save_state when configuration changes
PCI/ASPM: Disable L1 before configuring L1 Substates
PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state()
PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
PCI/ASPM: Move pci_save_ltr_state() to aspm.c
PCI/ASPM: Always build aspm.c
PCI/ASPM: Move pci_configure_ltr() to aspm.c
|
|
- Fix sysfs paths in aer_rootport_total_err_* documentation (Johan Hovold)
- Block runtime suspend while handling AER errors (Stanislaw Gruszka)
- Add a generic Header Log structure and reader shared by AER and DPC (Ilpo
Järvinen)
* pci/aer:
PCI/AER: Generalize TLP Header Log reading
PCI/AER: Use explicit register size for PCI_ERR_CAP
PCI/AER: Block runtime suspend when handling errors
PCI/AER: Clean up version indentation in ABI docs
PCI/AER: Fix rootport attribute paths in ABI docs
|
|
This patch fixes to check on the right return value if it was the last
callback. The rv variable got overwritten by the return of
copy_result_to_user(). Fixing it by introducing a second variable for
the return value and don't let rv being overwritten.
Cc: stable@vger.kernel.org
Fixes: 61bed0baa4db ("fs: dlm: use a non-static queue for callbacks")
Reported-by: Valentin Vidić <vvidic@valentin-vidic.from.hr>
Closes: https://lore.kernel.org/gfs2/Ze4qSvzGJDt5yxC3@valentin-vidic.from.hr
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Many PCIe device drivers save the configuration state of their device
during probe and restore it when their .slot_reset() hook is called during
PCIe error recovery.
If the ASPM configuration is changed after the driver's probe is called and
before an error event occurs, .slot_reset() restores the ASPM configuration
to what it was at the time of probe, not to what it was just before the
occurrence of the error event. This leads to a mismatch in ASPM
configuration between the device and its upstream device.
Update the saved configuration of the device when the ASPM configuration
changes.
Link: https://lore.kernel.org/r/20240222174436.3565146-1-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[bhelgaas: commit log, rebase to pci/aspm, rename to
pci_update_aspm_saved_state() since it updates only LNKCTL, update only
ASPMC and CLKREQ_EN in LNKCTL]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
|
|
Per PCIe r6.1, sec 5.5.4, L1 must be disabled while setting ASPM L1 PM
Substates enable bits. Previously this was enforced by clearing
PCI_EXP_LNKCTL_ASPMC before calling pci_restore_aspm_l1ss_state().
Move the L1 (and L0s, although that doesn't seem required) disable into
pci_restore_aspm_l1ss_state() itself so it's closer to the code that
depends on it.
Link: https://lore.kernel.org/r/20240223213733.GA115410@bhelgaas
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
ASPM state is saved and restored from pci_save/restore_pcie_state(). Since
the LTR Capability is linked with ASPM, move the LTR save and restore calls
there as well. No functional change intended.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240128233212.1139663-6-david.e.box@linux.intel.com
Link: https://lore.kernel.org/r/20240223205851.114931-6-helgaas@kernel.org
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
- Continuing work by Ard Biesheuvel to improve the x86 early startup
code, with the long-term goal to make it position independent:
- Get rid of early accesses to global objects, either by moving
them to the stack, deferring the access until later, or dropping
the globals entirely
- Move all code that runs early via the 1:1 mapping into
.head.text, and move code that does not out of it, so that build
time checks can be added later to ensure that no inadvertent
absolute references were emitted into code that does not
tolerate them
- Remove fixup_pointer() and occurrences of __pa_symbol(), which
rely on the compiler emitting absolute references, which is not
guaranteed
- Improve the early console code
- Add early console message about ignored NMIs, so that users are at
least warned about their existence - even if we cannot do anything
about them
- Improve the kexec code's kernel load address handling
- Enable more X86S (simplified x86) bits
- Simplify early boot GDT handling
- Micro-optimize the boot code a bit
- Misc cleanups
* tag 'x86-boot-2024-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/sev: Move early startup code into .head.text section
x86/sme: Move early SME kernel encryption handling into .head.text
x86/boot: Move mem_encrypt= parsing to the decompressor
efi/libstub: Add generic support for parsing mem_encrypt=
x86/startup_64: Simplify virtual switch on primary boot
x86/startup_64: Simplify calculation of initial page table address
x86/startup_64: Defer assignment of 5-level paging global variables
x86/startup_64: Simplify CR4 handling in startup code
x86/boot: Use 32-bit XOR to clear registers
efi/x86: Set the PE/COFF header's NX compat flag unconditionally
x86/boot/64: Load the final kernel GDT during early boot directly, remove startup_gdt[]
x86/boot/64: Use RIP_REL_REF() to access early_top_pgt[]
x86/boot/64: Use RIP_REL_REF() to access early page tables
x86/boot/64: Use RIP_REL_REF() to access '__supported_pte_mask'
x86/boot/64: Use RIP_REL_REF() to access early_dynamic_pgts[]
x86/boot/64: Use RIP_REL_REF() to assign 'phys_base'
x86/boot/64: Simplify global variable accesses in GDT/IDT programming
x86/trampoline: Bypass compat mode in trampoline_start64() if not needed
kexec: Allocate kernel above bzImage's pref_address
x86/boot: Add a message about ignored early NMIs
...
|
|
4ff116d0d5fd ("PCI/ASPM: Save L1 PM Substates Capability for
suspend/resume") restored the L1 PM Substates Capability after resume,
which reduced power consumption by making the ASPM L1.x states work after
resume.
a7152be79b62 ("Revert "PCI/ASPM: Save L1 PM Substates Capability for
suspend/resume"") reverted 4ff116d0d5fd because resume failed on some
systems, so power consumption after resume increased again.
a7152be79b62 mentioned that we restore L1 PM substate configuration even
though ASPM L1 may already be enabled. This is due the fact that the
pci_restore_aspm_l1ss_state() was called before pci_restore_pcie_state().
Save and restore the L1 PM Substates Capability, following PCIe r6.1, sec
5.5.4 more closely by:
1) Do not restore ASPM configuration in pci_restore_pcie_state() but
do that after PCIe capability is restored in pci_restore_aspm_state()
following PCIe r6.1, sec 5.5.4.
2) If BIOS reenables L1SS, particularly L1.2, we need to clear the
enables in the right order, downstream before upstream. Defer
restoring the L1SS config until we are at the downstream component.
Then update the config for both ends of the link in the prescribed
order.
3) Program ASPM L1 PM substate configuration before L1 enables.
4) Program ASPM L1 PM substate enables last, after rest of the fields
in the capability are programmed.
[bhelgaas: commit log, squash L1SS-related patches, do both LNKCTL restores
in pci_restore_pcie_state()]
Link: https://lore.kernel.org/r/20240128233212.1139663-3-david.e.box@linux.intel.com
Link: https://lore.kernel.org/r/20240128233212.1139663-4-david.e.box@linux.intel.com
Link: https://lore.kernel.org/r/20240223205851.114931-5-helgaas@kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217321
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216782
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216877
Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Co-developed-by: David E. Box <david.e.box@linux.intel.com>
Reported-by: Koba Ko <koba.ko@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Tasev Nikola <tasev.stefanoska@skynet.be> # Asus UX305FA
Cc: Mark Enriquez <enriquezmark36@gmail.com>
Cc: Thomas Witt <kernel@witt.link>
Cc: Werner Sembach <wse@tuxedocomputers.com>
Cc: Vidya Sagar <vidyas@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC fixup from Dave Hansen:
"Revert VERW fixed addressing patch.
The reverted commit is not x86/apic material and was cruft left over
from a merge.
I believe the sequence of events went something like this:
- The commit in question was added to x86/urgent
- x86/urgent was merged into x86/apic to resolve a conflict
- The commit was zapped from x86/urgent, but *not* from x86/apic
- x86/apic got pullled (yesterday)
I think we need to be a bit more vigilant when zapping things to make
sure none of the other branches are depending on the zapped material"
* tag 'x86-apic-2024-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "x86/bugs: Use fixed addressing for VERW operand"
|
|
When the trace_pipe_raw file is closed, there should be no new readers on
the file descriptor. This is mostly handled with the waking and wait_index
fields of the iterator. But there's still a slight race.
CPU 0 CPU 1
----- -----
wait_index++;
index = wait_index;
ring_buffer_wake_waiters();
wait_on_pipe()
ring_buffer_wait();
The ring_buffer_wait() will miss the wakeup from CPU 1. The problem is
that the ring_buffer_wait() needs the logic of:
prepare_to_wait();
if (!condition)
schedule();
Where the missing condition check is the iter->wait_index update.
Have the ring_buffer_wait() take a conditional callback function and a
data parameter that can be used within the wait_event_interruptible() of
the ring_buffer_wait() function.
In wait_on_pipe(), pass a condition function that will check if the
wait_index has been updated, if it has, it will return true to break out
of the wait_event_interruptible() loop.
Create a new field "closed" in the trace_iterator and set it in the
.flush() callback before calling ring_buffer_wake_waiters().
This will keep any new readers from waiting on a closed file descriptor.
Have the wait_on_pipe() condition callback also check the closed field.
Change the wait_index field of the trace_iterator to atomic_t. There's no
reason it needs to be 'long' and making it atomic and using
atomic_read_acquire() and atomic_fetch_inc_release() will provide the
necessary memory barriers.
Add a "woken" flag to tracing_buffers_splice_read() to exit the loop after
one more try to fetch data. That is, if it waited for data and something
woke it up, it should try to collect any new data and then exit back to
user space.
Link: https://lore.kernel.org/linux-trace-kernel/CAHk-=wgsNgewHFxZAJiAQznwPMqEtQmi1waeS2O1v6L4c_Um5A@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240312121703.557950713@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linke li <lilinke99@qq.com>
Cc: Rabin Vincent <rabin@rab.in>
Fixes: f3ddb74ad0790 ("tracing: Wake up ring buffer waiters on closing of the file")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Convert ring_buffer_wait() over to wait_event_interruptible(). The default
condition is to execute the wait loop inside __wait_event() just once.
This does not change the ring_buffer_wait() prototype yet, but
restructures the code so that it can take a "cond" and "data" parameter
and will call wait_event_interruptible() with a helper function as the
condition.
The helper function (rb_wait_cond) takes the cond function and data
parameters. It will first check if the buffer hit the watermark defined by
the "full" parameter and then call the passed in condition parameter. If
either are true, it returns true.
If rb_wait_cond() does not return true, it will set the appropriate
"waiters_pending" flag and returns false.
Link: https://lore.kernel.org/linux-trace-kernel/CAHk-=wgsNgewHFxZAJiAQznwPMqEtQmi1waeS2O1v6L4c_Um5A@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240312121703.399598519@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linke li <lilinke99@qq.com>
Cc: Rabin Vincent <rabin@rab.in>
Fixes: f3ddb74ad0790 ("tracing: Wake up ring buffer waiters on closing of the file")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The check for knowing if the poll should wait or not is basically the
exact same logic as rb_watermark_hit(). The only difference is that
rb_watermark_hit() also handles the !full case. But for the full case, the
logic is the same. Just call that instead of duplicating the code in
ring_buffer_poll_wait().
Link: https://lore.kernel.org/linux-trace-kernel/20240312131952.802267543@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
If a reader of the ring buffer is doing a poll, and waiting for the ring
buffer to hit a specific watermark, there could be a case where it gets
into an infinite ping-pong loop.
The poll code has:
rbwork->full_waiters_pending = true;
if (!cpu_buffer->shortest_full ||
cpu_buffer->shortest_full > full)
cpu_buffer->shortest_full = full;
The writer will see full_waiters_pending and check if the ring buffer is
filled over the percentage of the shortest_full value. If it is, it calls
an irq_work to wake up all the waiters.
But the code could get into a circular loop:
CPU 0 CPU 1
----- -----
[ Poll ]
[ shortest_full = 0 ]
rbwork->full_waiters_pending = true;
if (rbwork->full_waiters_pending &&
[ buffer percent ] > shortest_full) {
rbwork->wakeup_full = true;
[ queue_irqwork ]
cpu_buffer->shortest_full = full;
[ IRQ work ]
if (rbwork->wakeup_full) {
cpu_buffer->shortest_full = 0;
wakeup poll waiters;
[woken]
if ([ buffer percent ] > full)
break;
rbwork->full_waiters_pending = true;
if (rbwork->full_waiters_pending &&
[ buffer percent ] > shortest_full) {
rbwork->wakeup_full = true;
[ queue_irqwork ]
cpu_buffer->shortest_full = full;
[ IRQ work ]
if (rbwork->wakeup_full) {
cpu_buffer->shortest_full = 0;
wakeup poll waiters;
[woken]
[ Wash, rinse, repeat! ]
In the poll, the shortest_full needs to be set before the
full_pending_waiters, as once that is set, the writer will compare the
current shortest_full (which is incorrect) to decide to call the irq_work,
which will reset the shortest_full (expecting the readers to update it).
Also move the setting of full_waiters_pending after the check if the ring
buffer has the required percentage filled. There's no reason to tell the
writer to wake up waiters if there are no waiters.
Link: https://lore.kernel.org/linux-trace-kernel/20240312131952.630922155@goodmis.org
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 42fb0a1e84ff5 ("tracing/ring-buffer: Have polling block on watermark")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The rb_watermark_hit() checks if the amount of data in the ring buffer is
above the percentage level passed in by the "full" variable. If it is, it
returns true.
But it also sets the "shortest_full" field of the cpu_buffer that informs
writers that it needs to call the irq_work if the amount of data on the
ring buffer is above the requested amount.
The rb_watermark_hit() always sets the shortest_full even if the amount in
the ring buffer is what it wants. As it is not going to wait, because it
has what it wants, there's no reason to set shortest_full.
Link: https://lore.kernel.org/linux-trace-kernel/20240312115641.6aa8ba08@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 42fb0a1e84ff5 ("tracing/ring-buffer: Have polling block on watermark")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When pcm_runtime is adding platform components it will scan all
registered components. In case of DPCM FE/BE some DAI links will
configure dummy platform. However both dummy codec and dummy platform
are using "snd-soc-dummy" as component->name. Dummy codec should be
skipped when adding platforms otherwise there'll be overflow and UBSAN
complains.
Reported-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://msgid.link/r/20240305065606.3778642-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RFDS mitigation from Dave Hansen:
"RFDS is a CPU vulnerability that may allow a malicious userspace to
infer stale register values from kernel space. Kernel registers can
have all kinds of secrets in them so the mitigation is basically to
wait until the kernel is about to return to userspace and has user
values in the registers. At that point there is little chance of
kernel secrets ending up in the registers and the microarchitectural
state can be cleared.
This leverages some recent robustness fixes for the existing MDS
vulnerability. Both MDS and RFDS use the VERW instruction for
mitigation"
* tag 'rfds-for-linus-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM/x86: Export RFDS_NO and RFDS_CLEAR to guests
x86/rfds: Mitigate Register File Data Sampling (RFDS)
Documentation/hw-vuln: Add documentation for RFDS
x86/mmio: Disable KVM mitigation when X86_FEATURE_CLEAR_CPU_BUF is set
|
|
The sample rates set by the rockchip_i2s_tdm driver in master mode are
inaccurate up to 5% in several cases, due to the driver logic to configure
clocks and a nasty interaction with the Common Clock Framework.
To understand what happens, here is the relevant section of the clock tree
(slightly simplified), along with the names used in the driver:
vpll0 _OR_ vpll1 "mclk_root"
clk_i2s2_8ch_tx_src "mclk_parent"
clk_i2s2_8ch_tx_mux
clk_i2s2_8ch_tx "mclk" or "mclk_tx"
This is what happens when playing back e.g. at 192 kHz using
audio-graph-card (when recording the same applies, only s/tx/rx/):
0. at probe, rockchip_i2s_tdm_set_sysclk() stores the passed frequency in
i2s_tdm->mclk_tx_freq (*) which is 50176000, and that is never modified
afterwards
1. when playback is started, rockchip_i2s_tdm_hw_params() is called and
does the following two calls
2. rockchip_i2s_tdm_calibrate_mclk():
2a. selects mclk_root0 (vpll0) as a parent for mclk_parent
(mclk_tx_src), which is OK because the vpll0 rate is a good for
192000 (and sumbultiple) rates
2b. sets the mclk_root frequency based on ppm calibration computations
2c. sets mclk_tx_src to 49152000 (= 256 * 192000), which is also OK as
it is a multiple of the required bit clock
3. rockchip_i2s_tdm_set_mclk()
3a. calls clk_set_rate() to set the rate of mclk_tx (clk_i2s2_8ch_tx)
to the value of i2s_tdm->mclk_tx_freq (*), i.e. 50176000 which is
not a multiple of the sampling frequency -- this is not OK
3a1. clk_set_rate() reacts by reparenting clk_i2s2_8ch_tx_src to
vpll1 -- this is not OK because the default vpll1 rate can be
divided to get 44.1 kHz and related rates, not 192 kHz
The result is that the driver does a lot of ad-hoc decisions about clocks
and ends up in using the wrong parent at an unoptimal rate.
Step 0 is one part of the problem: unless the card driver calls set_sysclk
at each stream start, whatever rate is set in mclk_tx_freq during boot will
be taken and used until reboot. Moreover the driver does not care if its
value is not a multiple of any audio frequency.
Another part of the problem is that the whole reparenting and clock rate
setting logic is conflicting with the CCF algorithms to achieve largely the
same goal: selecting the best parent and setting the closest clock
rate. And it turns out that only calling once clk_set_rate() on
clk_i2s2_8ch_tx picks the correct vpll and sets the correct rate.
The fix is based on removing the custom logic in the driver to select the
parent and set the various clocks, and just let the Clock Framework do it
all. As a side effect, the set_sysclk() op becomes useless because we now
let the CCF compute the appropriate value for the sampling rate. It also
implies that the whole calibration logic is now dead code and so it is
removed along with the "PCM Clock Compensation in PPM" kcontrol, which has
always been broken anyway. The handling of the 4 optional clocks also
becomes dead code and is removed.
The actual rates have been tested playing 30 seconds of audio at various
sampling rates before and after this change using sox:
time play -r <sample_rate> -n synth 30 sine 950 gain -3
The time reported in the table below is the 'real' value reported by the
'time' command in the above command line.
rate before after
--------- ------ ------
8000 Hz 30.60s 30.63s
11025 Hz 30.45s 30.51s
16000 Hz 30.47s 30.50s
22050 Hz 30.78s 30.41s
32000 Hz 31.02s 30.43s
44100 Hz 30.78s 30.41s
48000 Hz 29.81s 30.45s
88200 Hz 30.78s 30.41s
96000 Hz 29.79s 30.42s
176400 Hz 27.40s 30.41s
192000 Hz 29.79s 30.42s
While the tests are running the clock tree confirms that:
* without the patch, vpll1 is always used and clk_i2s2_8ch_tx always
produces 50176000 Hz, which cannot be divided for most audio rates
except the slowest ones, generating inaccurate rates
* with the patch:
- for 192000 Hz vpll0 is used
- for 176400 Hz vpll1 is used
- clk_i2s2_8ch_tx always produces (256 * <rate>) Hz
Tested on the RK3308 using the internal audio codec.
Fixes: 081068fd6414 ("ASoC: rockchip: add support for i2s-tdm controller")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://msgid.link/r/20240305-rk3308-audio-codec-v4-1-312acdbe628f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
This was reverts commit 8009479ee919b9a91674f48050ccbff64eafedaa.
It was originally in x86/urgent, but was deemed wrong so got zapped.
But in the meantime, x86/urgent had been merged into x86/apic to
resolve a conflict. I didn't notice the merge so didn't zap it
from x86/apic and it managed to make it up with the x86/apic
material.
The reverted commit is known to cause some KASAN problems.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
|
|
The split of /reserved-memory handling between fdt.c and
of_reserved_mem.c makes for reading and restructuring the code
difficult. As of_reserved_mem.c is only built for
CONFIG_OF_EARLY_FLATTREE already, move all the code to one spot.
Acked-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com>
Link: https://lore.kernel.org/r/20240311181303.1516514-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
We make a few cancellation judgements based on ctx->rings, so let's
zero it afer deallocation for IORING_SETUP_NO_MMAP just like it's
done with the mmap case. Likely, it's not a real problem, but zeroing
is safer and better tested.
Cc: stable@vger.kernel.org
Fixes: 03d89a2de25bbc ("io_uring: support for user allocated memory for rings/sqes")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9ff6cdf91429b8a51699c210e1f6af6ea3f8bdcf.1710255382.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If read multishot is being invoked from the poll retry handler, then we
should return IOU_ISSUE_SKIP_COMPLETE rather than -EAGAIN. If not, then
a CQE will be posted with -EAGAIN rather than triggering the retry when
the file is flagged as readable again.
Cc: stable@vger.kernel.org
Reported-by: Sargun Dhillon <sargun@meta.com>
Fixes: fc68fcda04910 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Yu Chien Peter Lin <peterlin@andestech.com> says:
This patch series introduces the Andes PMU extension, which serves the
same purpose as Sscofpmf and Smcntrpmf. Its non-standard local interrupt
is assigned to bit 18 in the custom S-mode local interrupt enable and
pending registers (slie/slip), while the interrupt cause is (256 + 18).
* b4-shazam-merge:
riscv: andes: Support specifying symbolic firmware and hardware raw events
riscv: dts: renesas: Add Andes PMU extension for r9a07g043f
dt-bindings: riscv: Add Andes PMU extension description
perf: RISC-V: Introduce Andes PMU to support perf event sampling
perf: RISC-V: Eliminate redundant interrupt enable/disable operations
riscv: dts: renesas: r9a07g043f: Update compatible string to use Andes INTC
dt-bindings: riscv: Add Andes interrupt controller compatible string
riscv: errata: Rename defines for Andes
Link: https://lore.kernel.org/r/20240222083946.3977135-1-peterlin@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add the Andes AX45 JSON files that allows specifying symbolic event
names for the raw PMU events.
Signed-off-by: Locus Wei-Han Chen <locus84@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Charles Ci-Jyun Wu <dminus@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-11-peterlin@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
xandespmu stands for Andes Performance Monitor Unit extension.
Based on the added Andes PMU ISA string, the SBI PMU driver
will make use of the non-standard irq source.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240222083946.3977135-10-peterlin@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Document the ISA string for Andes Technology performance monitor
extension which provides counter overflow interrupt and mode
filtering mechanisms.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-9-peterlin@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Assign riscv_pmu_irq_num the value of (256 + 18) for the custome PMU
and add SSCOUNTOVF and SIP alternatives to ALT_SBI_PMU_OVERFLOW()
and ALT_SBI_PMU_OVF_CLEAR_PENDING() macros, respectively.
To make use of Andes PMU extension, "xandespmu" needs to be appended
to the riscv,isa-extensions for each cpu node in device-tree, and
make sure CONFIG_ANDES_CUSTOM_PMU is enabled.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Charles Ci-Jyun Wu <dminus@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Co-developed-by: Locus Wei-Han Chen <locus84@andestech.com>
Signed-off-by: Locus Wei-Han Chen <locus84@andestech.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-8-peterlin@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The interrupt enable/disable operations are already performed by the
IRQ chip functions riscv_intc_irq_unmask()/riscv_intc_irq_mask() during
enable_percpu_irq()/disable_percpu_irq(). It can be done only once.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-7-peterlin@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
