summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-07-14Merge tag 'pci-v4.13-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - fix a typo that broke Rockchip enumeration - fix a new memory leak in the ARM host bridge failure path * tag 'pci-v4.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: rockchip: Check for pci_scan_root_bus_bridge() failure correctly ARM/PCI: Fix pcibios_init_resource() struct pci_host_bridge leak
2017-07-14Merge tag 'befs-v4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/luisbg/linux-befs Pull single befs fix from Luis de Bethencourt: "Very little activity in the befs file system this time since I'm busy settling into a new job" * tag 'befs-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/luisbg/linux-befs: befs: add kernel-doc formatting for befs_bt_read_super()
2017-07-14dma-buf/fence: Avoid use of uninitialised timestampChris Wilson
[ 236.821534] WARNING: kmemcheck: Caught 64-bit read from uninitialized memory (ffff8802538683d0) [ 236.828642] 420000001e7f0000000000000000000000080000000000000000000000000000 [ 236.839543] i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u [ 236.850420] ^ [ 236.854123] RIP: 0010:[<ffffffff81396f07>] [<ffffffff81396f07>] fence_signal+0x17/0xd0 [ 236.861313] RSP: 0018:ffff88024acd7ba0 EFLAGS: 00010282 [ 236.865027] RAX: ffffffff812f6a90 RBX: ffff8802527ca800 RCX: ffff880252cb30e0 [ 236.868801] RDX: ffff88024ac5d918 RSI: ffff880252f780e0 RDI: ffff880253868380 [ 236.872579] RBP: ffff88024acd7bc0 R08: ffff88024acd7be0 R09: 0000000000000000 [ 236.876407] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880253868380 [ 236.880185] R13: ffff8802538684d0 R14: ffff880253868380 R15: ffff88024cd48e00 [ 236.883983] FS: 00007f1646d1a740(0000) GS:ffff88025d000000(0000) knlGS:0000000000000000 [ 236.890959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 236.894702] CR2: ffff880251360318 CR3: 000000024ad21000 CR4: 00000000001406f0 [ 236.898481] [<ffffffff8130d1ad>] i915_gem_request_retire+0x1cd/0x230 [ 236.902439] [<ffffffff8130e2b3>] i915_gem_request_alloc+0xa3/0x2f0 [ 236.906435] [<ffffffff812fb1bd>] i915_gem_do_execbuffer.isra.41+0xb6d/0x18b0 [ 236.910434] [<ffffffff812fc265>] i915_gem_execbuffer2+0x95/0x1e0 [ 236.914390] [<ffffffff812ad625>] drm_ioctl+0x1e5/0x460 [ 236.918275] [<ffffffff8110d4cf>] do_vfs_ioctl+0x8f/0x5c0 [ 236.922168] [<ffffffff8110da3c>] SyS_ioctl+0x3c/0x70 [ 236.926090] [<ffffffff814b7a5f>] entry_SYSCALL_64_fastpath+0x17/0x93 [ 236.930045] [<ffffffffffffffff>] 0xffffffffffffffff We only set the timestamp before we mark the fence as signaled. It is done before to avoid observers having a window in which they may see the fence as complete but no timestamp. Having it does incur a potential for the timestamp to be written twice, and even for it to be corrupted if the u64 write is not atomic. Instead use a new bit to record the presence of the timestamp, and teach the readers to wait until it is set if the fence is complete. There still remains a race where the timestamp for the signaled fence may be shown before the fence is reported as signaled, but that's a pre-existing error. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Daniel Vetter <daniel.vetter@intel.com> Reported-by: Rafael Antognolli <rafael.antognolli@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170214124001.1930-1-chris@chris-wilson.co.uk
2017-07-14Btrfs: fix unexpected return value of bio_readpage_errorLiu Bo
With blk_status_t conversion (that are now present in master), bio_readpage_error() may return 1 as now ->submit_bio_hook() may not set %ret if it runs without problems. This fixes that unexpected return value by changing btrfs_check_repairable() to return a bool instead of updating %ret, and patch is applicable to both codebases with and without blk_status_t. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-07-14btrfs: btrfs_create_repair_bio never fails, skip error handlingDavid Sterba
As the function uses the non-failing bio allocation, we can remove error handling from the callers as well. Signed-off-by: David Sterba <dsterba@suse.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-07-14btrfs: cloned bios must not be iterated by bio_for_each_segment_allDavid Sterba
We've started using cloned bios more in 4.13, there are some specifics regarding the iteration. Filipe found [1] that the raid56 iterated a cloned bio using bio_for_each_segment_all, which is incorrect. The cloned bios have wrong bi_vcnt and this could lead to silent corruptions. This patch adds assertions to all remaining bio_for_each_segment_all cases. [1] https://patchwork.kernel.org/patch/9838535/ Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-07-14Merge branch 'next/filipe' into for-4.13-part2David Sterba
- incremental send fixes - raid56 corruption fix (cloned bio iteration)
2017-07-14drm: add helper functions for YCBCR420 handlingShashank Sharma
This patch adds helper functions for YCBCR 420 handling. These functions do: - check if a given video mode is YCBCR 420 only mode. - check if a given video mode is YCBCR 420 also mode. V2: Added YCBCR functions as helpers in DRM layer, instead of keeping it in I915 layer. V3: Added handling for YCBCR-420 only modes too. V4: EXPORT_SYMBOL(drm_find_hdmi_output_type) V5: Addressed review comments from Danvet: - %s/drm_find_hdmi_output_type/drm_display_info_hdmi_output_type - %s/drm_can_support_ycbcr_output/drm_display_supports_ycbcr_output - %s/drm_can_support_this_ycbcr_output/ drm_display_supports_this_ycbcr_output - pass drm_display_info instead of drm_connector for consistency - For drm_get_highest_quality_ycbcr_supported doc, move the variable description above, and then the function description. V6: Add only YCBCR420 helpers (Ville) V7: Addressed review comments from Ville - Remove cea_vic_valid() check. - Fix indentation. - Make input parameters to helpers, const. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-9-git-send-email-shashank.sharma@intel.com [vsyrjala: Fix sparse indentation warn] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-07-14drm/edid: parse ycbcr 420 deep color informationShashank Sharma
CEA-861-F spec adds ycbcr420 deep color support information in hf-vsdb block. This patch extends the existing hf-vsdb parsing function by adding parsing of ycbcr420 deep color support from the EDID and adding it into display information stored. V2: Rebase V3: Rebase V4: Moved definition of y420_dc_modes into this patch, where its used (Ville) V5: Optimize function, if(conditions) not reqd (Ville) V6: Rebase V7: Rebase Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-8-git-send-email-shashank.sharma@intel.com [vsyrjala: Fix sparse indentation warn] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-07-14drm/edid: parse YCBCR420 videomodes from EDIDShashank Sharma
HDMI 2.0 spec adds support for YCBCR420 sub-sampled output. CEA-861-F adds two new blocks in EDID's CEA extension blocks, to provide information about sink's YCBCR420 output capabilities. These blocks are: - YCBCR420vdb(YCBCR 420 video data block): This block contains VICs of video modes, which can be sopported only in YCBCR420 output mode (Not in RGB/YCBCR444/422. Its like a normal SVD block, valid for YCBCR420 modes only. - YCBCR420cmdb(YCBCR 420 capability map data block): This block gives information about video modes which can support YCBCR420 output mode also (along with RGB,YCBCR444/422 etc) This block contains a bitmap index of normal svd videomodes, which can support YCBCR420 output too. So if bit 0 from first vcb byte is set, first video mode in the svd list can support YCBCR420 output too. Bit 1 means second video mode from svd list can support YCBCR420 output too, and so on. This patch adds two bitmaps in display's hdmi_info structure, one each for VCB and VDB modes. If the source is HDMI 2.0 capable, this patch adds: - VDB modes (YCBCR 420 only modes) in connector's mode list, also makes an entry in the vdb_bitmap per vic. - VCB modes (YCBCR 420 also modes) only entry in the vcb_bitmap. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jose Abreu <joabreu@synopsys.com> Cc: Emil Velikov <emil.l.velikov@gmail.com> V2: Addressed Review comments from Emil: - Use 1ULL<<i instead of 1<<i to make sure the output is 64bit. - Use the suggested method for updating dbmap. - Add documentation for YCBCR420_vcb_map to fix kbuild warning. Review comments from Ville: - Do not expose the YCBCR420 flags in uabi layer, keep it internal. - Save a map of YCBCR420 modes for future reference. - Check db length before trying to parse extended tag. - Add a warning if there are > 64 modes in capability map block. - Use y420cmdb in function names and macros while dealing with vcb to be aligned with spec. - Move the display information parsing block ahead of mode parsing blocks. V3: Addressed design/review comments from Ville - Do not add flags in video modes, else we have to expose them to user - There should not be a UABI change, and kernel should detect the choice of the output based on type of mode, and the bitmaps. - Use standard bitops from kernel bitmap header, instead of calculating bit positions manually. V4: Addressed review comments from Ville: - s/ycbcr_420_vdb/y420vdb - s/ycbcr_420_vcb/y420cmdb - Be less verbose on description of do_y420vdb_modes - Move newmode variable in the loop scope. - Use svd_to_vic() to get a VIC, instead of 0x7f - Remove bitmap description for CMDB modes & VDB modes - Dont add connector->ycbcr_420_allowed check for cmdb modes - Remove 'len' variable, in is_y420cmdb function, which is used only once - Add length check in is_y420vdb function - Remove unnecessary if (!db) check in function parse_y420cmdb_bitmap - Do not add print about YCBCR 420 modes - Fix indentation in few places - Move ycbcr420_dc_modes in next patch, where its used - Add a separate patch for movement of drm_add_display_info() V5: Addressed review comments from Ville: - Add the patch which cleans up the current EXTENDED_TAG usage - Make y420_cmdb_map u64 - Do not block ycbcr420 modes while parsing the EDID, rather add a separate helper function to prune ycbcr420-only modes from connector's probed modes. V6: Rebase V7: Move this patch after the 420_only validation patch (Ville) V8: Addressed review comments from Ville - use cea_vic_valid check before adding cmdb/vdb modes - add check for i < 64 while adding cmdb modes - use 1ULL while checking bitmap Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1500028426-14883-1-git-send-email-shashank.sharma@intel.com [vsyrjala: Fix checkpatch complaints and indentation] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-07-14drm: add helper to validate YCBCR420 modesShashank Sharma
YCBCR420 modes are supported only on HDMI 2.0 capable sources. This patch adds: - A drm helper to validate YCBCR420-only mode on a particular connector. This function will help pruning the YCBCR420-only modes from the connector's modelist. - A bool variable (ycbcr_420_allowed) in the drm connector structure. While handling the EDID from HDMI 2.0 sinks, its important to know if the source is capable of handling YCBCR420 output, so that no YCBCR 420 modes will be listed for sources which can't handle it. A driver should set this variable if it wants to see YCBCR420 modes in the modedb. V5: Introduced the patch in series. V6: Squashed two patches (validate YCBCR420 and add YCBCR420 identifier) V7: Addressed review comments from Vile: - Move this patch before we add 420 modes from EDID. - No need for drm_valid_cea_vic() check, function back to non-static. - Update MODE_STATUS with NO_420 condition. - Introduce y420_vdb_modes variable in this patch Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-6-git-send-email-shashank.sharma@intel.com [vsyrjala: Drop the now bogus EXPORT_SYMBOL(drm_valid_cea_vic)] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-07-14drm/edid: cleanup patch for CEA extended-tag macroShashank Sharma
CEA-861-F introduces extended tag codes for EDID extension blocks, which indicates the actual type of the data block. The code for using exteded tag is 0x7, whereas in the existing code, the corresponding macro is named as "VIDEO_CAPABILITY_BLOCK" This patch renames the macro and usages from "VIDEO_CAPABILITY_BLOCK" to "USE_EXTENDED_TAG" V2: Add extended tag code check for video capabilitiy block (ville) V3: Ville: - Use suggested names for macros - Check the block length first, before checking the extended tag V4: Fix commit message (David) V5: Introduced this patch into HDMI-YCBCR-output series V6: Rebase V7: Rebase Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-5-git-send-email-shashank.sharma@intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-07-14drm/edid: parse sink information before CEA blocksShashank Sharma
CEA-861-F adds ycbcr capability map block, for HDMI 2.0 sinks. This block contains a map of indexes of CEA modes, which can support YCBCR 420 output also. To avoid multiple parsing of same CEA block, let's parse the sink information and get this map, before parsing CEA modes. This patch moves the call to drm_add_display_info function, before the mode parsing block. V4: Introduced new patch in the series V5: Move this patch before 4:2:0 parsing patch (ville) Added r-b from Ville V6: Rebase V7: Rebase Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-4-git-send-email-shashank.sharma@intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-07-14drm/edid: complete CEA modedb(VIC 1-107)Shashank Sharma
CEA-861-F specs defines new video modes to be used with HDMI 2.0 EDIDs. The VIC range has been extended from 1-64 to 1-107. Our existing CEA modedb contains only 64 modes (VIC=1 to VIC=64). Now to be able to parse new CEA modes using the existing methods, we have to complete the modedb (VIC=65 onwards). This patch adds: - Timings for existing CEA video modes (from VIC=65 till VIC=92) - Newly added 4k modes (from VIC=93 to VIC=107). The patch was originaly discussed and reviewed here: https://patchwork.freedesktop.org/patch/135810/ Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> V2: Rebase V3: Rebase V4: Added native bit handling as per CEA-861-F spec (Ville) V5: Fix timings for VIC 77:1920x1080 and 104:3840x2160p (Ville) Remove unnecessary paranthesis from function svd_to_vic (Ville) Added r-b (Neil) V6: Rebase V7: Fix indentation for modes from VIC 80 Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-3-git-send-email-shashank.sharma@intel.com [vsyrjala: Fix up remaining formatting/indentation issues] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-07-14drm: handle HDMI 2.0 VICs in AVI info-framesShashank Sharma
HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64). For any other mode, the VIC filed in AVI infoframes should be 0. HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is extended to (VIC 1-107). This patch adds a bool input variable, which indicates if the connected sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a HDMI 2.0 VIC to a HDMI 1.4 sink. This patch touches all drm drivers, who are callers of this function drm_hdmi_avi_infoframe_from_display_mode but to make sure there is no change in current behavior, is_hdmi2 is kept as false. In case of I915 driver, this patch: - checks if the connected display is HDMI 2.0. - HDMI infoframes carry one of this two type of information: - VIC for 4K modes for HDMI 1.4 sinks - S3D information for S3D modes As CEA-861-F has already defined VICs for 4K videomodes, this patch doesn't allow sending HDMI infoframes for HDMI 2.0 sinks, until the mode is 3D. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jose Abreu <jose.abreu@synopsys.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Daniel Vetter <daniel.vetter@intel.com> PS: This patch touches a few lines in few files, which were already above 80 char, so checkpatch gives 80 char warning again. - gpu/drm/omapdrm/omap_encoder.c - gpu/drm/i915/intel_sdvo.c V2: Rebase, Added r-b from Andrzej V3: Addressed review comment from Ville: - Do not send VICs in both AVI-IF and HDMI-IF send only one of it. V4: Rebase V5: Added r-b from Neil. Addressed review comments from Ville - Do not block HDMI vendor IF, instead check for VIC while handling AVI infoframes V6: Rebase V7: Rebase Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-2-git-send-email-shashank.sharma@intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-07-14sparc64: Measure receiver forward progress to avoid send mondo timeoutJane Chu
A large sun4v SPARC system may have moments of intensive xcall activities, usually caused by unmapping many pages on many CPUs concurrently. This can flood receivers with CPU mondo interrupts for an extended period, causing some unlucky senders to hit send-mondo timeout. This problem gets worse as cpu count increases because sometimes mappings must be invalidated on all CPUs, and sometimes all CPUs may gang up on a single CPU. But a busy system is not a broken system. In the above scenario, as long as the receiver is making forward progress processing mondo interrupts, the sender should continue to retry. This patch implements the receiver's forward progress meter by introducing a per cpu counter 'cpu_mondo_counter[cpu]' where 'cpu' is in the range of 0..NR_CPUS. The receiver increments its counter as soon as it receives a mondo and the sender tracks the receiver's counter. If the receiver has stopped making forward progress when the retry limit is reached, the sender declares send-mondo-timeout and panic; otherwise, the receiver is allowed to keep making forward progress. In addition, it's been observed that PCIe hotplug events generate Correctable Errors that are handled by hypervisor and then OS. Hypervisor 'borrows' a guest cpu strand briefly to provide the service. If the cpu strand is simultaneously the only cpu targeted by a mondo, it may not be available for the mondo in 20msec, causing SUN4V mondo timeout. It appears that 1 second is the agreed wait time between hypervisor and guest OS, this patch makes the adjustment. Orabug: 25476541 Orabug: 26417466 Signed-off-by: Jane Chu <jane.chu@oracle.com> Reviewed-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com> Reviewed-by: Rob Gardner <rob.gardner@oracle.com> Reviewed-by: Thomas Tai <thomas.tai@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14drm/tinydrm: Add RePaper e-ink driverNoralf Trønnes
This adds support for the Pervasive Displays RePaper branded displays. The controller code is taken from the userspace driver available through repaper.org. Only the V231 film is supported since the others are EOL. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: http://patchwork.freedesktop.org/patch/msgid/1496934875-51984-5-git-send-email-noralf@tronnes.org
2017-07-14drm/tinydrm: Add tinydrm_xrgb8888_to_gray8() helperNoralf Trønnes
Drm has no monochrome or greyscale support so add a conversion from the common format XR24. Also reorder includes into the common order. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: http://patchwork.freedesktop.org/patch/msgid/1496934875-51984-4-git-send-email-noralf@tronnes.org
2017-07-14dt-bindings: Add Pervasive Displays RePaper bindingsNoralf Trønnes
Add device-tree binding documentation for the 1.44", 1.9", 2.0" and 2.7" display panels. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: http://patchwork.freedesktop.org/patch/msgid/1496934875-51984-3-git-send-email-noralf@tronnes.org
2017-07-14of: Add vendor prefix for Pervasive DisplaysNoralf Trønnes
Pervasive Displays Inc. designs, develops, and manufactures low-power electrophoretic (e-ink) display modules and supporting electronics for commercial and industrial display applications. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: http://patchwork.freedesktop.org/patch/msgid/1496934875-51984-2-git-send-email-noralf@tronnes.org
2017-07-14sctp: fix an array overflow when all ext chunks are setXin Long
Marcelo noticed an array overflow caused by commit c28445c3cb07 ("sctp: add reconf_enable in asoc ep and netns"), in which sctp would add SCTP_CID_RECONF into extensions when reconf_enable is set in sctp_make_init and sctp_make_init_ack. Then now when all ext chunks are set, 4 ext chunk ids can be put into extensions array while extensions array size is 3. It would cause a kernel panic because of this overflow. This patch is to fix it by defining extensions array size is 4 in both sctp_make_init and sctp_make_init_ack. Fixes: c28445c3cb07 ("sctp: add reconf_enable in asoc ep and netns") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14liquidio: fix possible eeprom format string overflowArnd Bergmann
gcc reports that the temporary buffer for computing the string length may be too small here: drivers/net/ethernet/cavium/liquidio/lio_ethtool.c: In function 'lio_get_eeprom_len': /drivers/net/ethernet/cavium/liquidio/lio_ethtool.c:345:21: error: 'sprintf' may write a terminating nul past the end of the destination [-Werror=format-overflow=] len = sprintf(buf, "boardname:%s serialnum:%s maj:%lld min:%lld\n", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/cavium/liquidio/lio_ethtool.c:345:6: note: 'sprintf' output between 35 and 167 bytes into a destination of size 128 len = sprintf(buf, "boardname:%s serialnum:%s maj:%lld min:%lld\n", This extends it to 192 bytes, which is certainly enough. As far as I could tell, there are no other constraints that require a specific maximum size. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14vmxnet3: avoid format strint overflow warningArnd Bergmann
gcc-7 notices that "-event-%d" could be more than 11 characters long if we had larger 'vector' numbers: drivers/net/vmxnet3/vmxnet3_drv.c: In function 'vmxnet3_activate_dev': drivers/net/vmxnet3/vmxnet3_drv.c:2095:40: error: 'sprintf' may write a terminating nul past the end of the destination [-Werror=format-overflow=] sprintf(intr->event_msi_vector_name, "%s-event-%d", ^~~~~~~~~~~~~ drivers/net/vmxnet3/vmxnet3_drv.c:2095:3: note: 'sprintf' output between 9 and 33 bytes into a destination of size 32 The current code is safe, but making the string a little longer is harmless and lets gcc see that it's ok. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14net: thunder_bgx: avoid format string overflow warningArnd Bergmann
gcc warns that the temporary buffer might be too small here: drivers/net/ethernet/cavium/thunder/thunder_bgx.c: In function 'bgx_probe': drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1020:16: error: '%d' directive writing between 1 and 10 bytes into a region of size between 9 and 11 [-Werror=format-overflow=] sprintf(str, "BGX%d LMAC%d mode", bgx->bgx_id, lmacid); ^~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1020:16: note: directive argument in the range [0, 2147483647] drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1020:3: note: 'sprintf' output between 16 and 27 bytes into a destination of size 20 This probably can't happen, but it can't hurt to make it long enough for the theoretical limit. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14bnx2x: fix format overflow warningArnd Bergmann
gcc notices that large queue numbers would overflow the queue name string: drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c: In function 'bnx2x_get_strings': drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c:3165:25: error: '%d' directive writing between 1 and 10 bytes into a region of size 5 [-Werror=format-overflow=] drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c:3165:25: note: directive argument in the range [0, 2147483647] drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c:3165:5: note: 'sprintf' output between 2 and 11 bytes into a destination of size 5 There is a hard limit in place that makes the number at most two digits, so the code is fine. This changes it to use snprintf() to truncate instead of overflowing, which shuts up that warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14net: niu: fix format string overflow warning:Arnd Bergmann
We get a warning for the port_name string that might be longer than six characters if we had more than 10 ports: drivers/net/ethernet/sun/niu.c: In function 'niu_put_parent': drivers/net/ethernet/sun/niu.c:9563:21: error: '%d' directive writing between 1 and 3 bytes into a region of size 2 [-Werror=format-overflow=] sprintf(port_name, "port%d", port); ^~~~~~~~ drivers/net/ethernet/sun/niu.c:9563:21: note: directive argument in the range [0, 255] drivers/net/ethernet/sun/niu.c:9563:2: note: 'sprintf' output between 6 and 8 bytes into a destination of size 6 sprintf(port_name, "port%d", port); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/sun/niu.c: In function 'niu_pci_init_one': drivers/net/ethernet/sun/niu.c:9538:22: error: '%d' directive writing between 1 and 3 bytes into a region of size 2 [-Werror=format-overflow=] sprintf(port_name, "port%d", port); ^~~~~~~~ drivers/net/ethernet/sun/niu.c:9538:22: note: directive argument in the range [0, 255] drivers/net/ethernet/sun/niu.c:9538:3: note: 'sprintf' output between 6 and 8 bytes into a destination of size 6 While we know that the port number is small, there is no harm in making the format string two bytes longer to avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14isdn: divert: fix sprintf buffer overflow warningArnd Bergmann
One string we pass into the cs->info buffer might be too long, as pointed out by gcc: drivers/isdn/divert/isdn_divert.c: In function 'll_callback': drivers/isdn/divert/isdn_divert.c:488:22: error: '%d' directive writing between 1 and 3 bytes into a region of size between 1 and 69 [-Werror=format-overflow=] sprintf(cs->info, "%d 0x%lx %s %s %s %s 0x%x 0x%x %d %d %s\n", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/isdn/divert/isdn_divert.c:488:22: note: directive argument in the range [0, 255] drivers/isdn/divert/isdn_divert.c:488:4: note: 'sprintf' output 25 or more bytes (assuming 129) into a destination of size 90 This is unlikely to actually cause problems, so let's use snprintf as a simple workaround to shut up the warning and truncate the buffer instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14net: qcom/emac: fix double free of SGMII IRQ during shutdownTimur Tabi
If the interface is not up, then don't try to close it during a shutdown. This avoids possible double free of the IRQ, which can happen during a shutdown. Fixes: 03eb3eb4d4d5 ("net: qcom/emac: add shutdown function") Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14smsc95xx: use ethtool_op_get_ts_info()Petr Kulhavy
This change enables the use of SW timestamping on Raspberry PI. smsc95xx uses the usbnet transmit function usbnet_start_xmit(), which implements software timestamping. However the SOF_TIMESTAMPING_TX_SOFTWARE capability was missing and only SOF_TIMESTAMPING_RX_SOFTWARE was announced. By using ethtool_op_get_ts_info() as get_ts_info() also the SOF_TIMESTAMPING_TX_SOFTWARE is announced. Signed-off-by: Petr Kulhavy <brain@jikos.cz> Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14net sched actions: rename act_get_notify() to tcf_get_notify()Roman Mashak
Make name consistent with other TC event notification routines, such as tcf_add_notify() and tcf_del_notify() Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14net/packet: Fix Tx queue selection for AF_PACKETIván Briano
When PACKET_QDISC_BYPASS is not used, Tx queue selection will be done before the packet is enqueued, taking into account any mappings set by a queuing discipline such as mqprio without hardware offloading. This selection may be affected by a previously saved queue_mapping, either on the Rx path, or done before the packet reaches the device, as it's currently the case for AF_PACKET. In order for queue selection to work as expected when using traffic control, there can't be another selection done before that point is reached, so move the call to packet_pick_tx_queue to packet_direct_xmit, leaving the default xmit path as it was before PACKET_QDISC_BYPASS was introduced. A forward declaration of packet_pick_tx_queue() is introduced to avoid the need to reorder the functions within the file. Fixes: d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option") Signed-off-by: Iván Briano <ivan.briano@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14net: bridge: fix dest lookup when vlan proto doesn't matchNikolay Aleksandrov
With 802.1ad support the vlan_ingress code started checking for vlan protocol mismatch which causes the current tag to be inserted and the bridge vlan protocol & pvid to be set. The vlan tag insertion changes the skb mac_header and thus the lookup mac dest pointer which was loaded prior to calling br_allowed_ingress in br_handle_frame_finish is VLAN_HLEN bytes off now, pointing to the last two bytes of the destination mac and the first four of the source mac causing lookups to always fail and broadcasting all such packets to all ports. Same thing happens for locally originated packets when passing via br_dev_xmit. So load the dest pointer after the vlan checks and possible skb change. Fixes: 8580e2117c06 ("bridge: Prepare for 802.1ad vlan filtering support") Reported-by: Anitha Narasimha Murthy <anitha@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14cxgb4: ptp_clock_register() returns error pointersGanesh Goudar
Check ptp_clock_register() return not only for NULL but also for error pointers, and also nullify adapter->ptp_clock if ptp_clock_register() fails. Fixes: 9c33e4208bce ("cxgb4: Add PTP Hardware Clock (PHC) support") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14net: hns: add acpi function of xge led controlLiuJian
The current code only support DT method to control xge led. This patch is the implementation of acpi method to control xge led. Signed-off-by: LiuJian <liujian56@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14netpoll: shut up a kernel warning on refcountWANG Cong
When we convert atomic_t to refcount_t, a new kernel warning on "increment on 0" is introduced in the netpoll code, zap_completion_queue(). In fact for this special case, we know the refcount is 0 and we just have to set it to 1 to satisfy the following dev_kfree_skb_any(), so we can just use refcount_set(..., 1) instead. Fixes: 633547973ffc ("net: convert sk_buff.users from atomic_t to refcount_t") Reported-by: Dave Jones <davej@codemonkey.org.uk> Cc: Reshetova, Elena <elena.reshetova@intel.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14cdc_ncm: Set NTB format again after altsetting switch for Huawei devicesEnrico Mioso
Some firmwares in Huawei E3372H devices have been observed to switch back to NTB 32-bit format after altsetting switch. This patch implements a driver flag to check for the device settings and set NTB format to 16-bit again if needed. The flag has been activated for devices controlled by the huawei_cdc_ncm.c driver. V1->V2: - fixed broken error checks - some corrections to the commit message V2->V3: - variable name changes, to clarify what's happening - check (and possibly set) the NTB format later in the common bind code path Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Reported-and-tested-by: Christian Panton <christian@panton.org> Reviewed-by: Bjørn Mork <bjorn@mork.no> CC: Bjørn Mork <bjorn@mork.no> CC: Christian Panton <christian@panton.org> CC: linux-usb@vger.kernel.org CC: netdev@vger.kernel.org CC: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14drm/amd/powerplay: add profile mode for vega10.Rex Zhu
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-07-14mdio: mux: fix parsing mux registers outside of the PHY address rangeMartin Blumenstingl
mdio_mux_init parses the child nodes of the MDIO mux. When using "mdio-mux-mmioreg" the child nodes are describing the register value that is written to switch between the MDIO busses. The change which makes the error messages more verbose changed the parsing of the "reg" property from a simple of_property_read_u32 call to of_mdio_parse_addr. On a Khadas VIM (based on the Meson GXL SoC, which uses mdio-mux-mmioreg) this prevents registering the MDIO mux (because the "reg" values on the MDIO mux child nodes are 0x2009087f and 0xe40908ff) and leads to the following errors: mdio-mux-mmioreg c883455c.eth-phy-mux: /soc/periphs@c8834000/eth-phy-mux/mdio@e40908ff PHY address -469169921 is too large mdio-mux-mmioreg c883455c.eth-phy-mux: Error: Failed to find reg for child /soc/periphs@c8834000/eth-phy-mux/mdio@e40908ff mdio-mux-mmioreg c883455c.eth-phy-mux: /soc/periphs@c8834000/eth-phy-mux/mdio@2009087f PHY address 537462911 is too large mdio-mux-mmioreg c883455c.eth-phy-mux: Error: Failed to find reg for child /soc/periphs@c8834000/eth-phy-mux/mdio@2009087f mdio-mux-mmioreg c883455c.eth-phy-mux: Error: No acceptable child buses found mdio-mux-mmioreg c883455c.eth-phy-mux: failed to register mdio-mux bus /soc/periphs@c8834000/eth-phy-mux (as a result of that ethernet is not working, because the PHY which is connected through the mux' child MDIO bus, which is not being registered). Fix this by reverting the change from of_mdio_parse_addr to of_mdio_parse_addr. Fixes: 342fa1964439 ("mdio: mux: make child bus walking more permissive and errors more verbose") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14drm/amdgpu: fix amdgpu_bo_gpu_accessible()Christian König
The test was relaxed a bit to much. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-and-Tested-by: Roger He <Hongbo.He@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-07-14drm/amdgpu: map VM BOs for CPU based updates only onceChristian König
No need to try to map them every time. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-07-14drm/amdgpu: make sure BOs are always kunmappedChristian König
When a BO is moved or destroyed it shouldn't be kmapped any more. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-07-14drm/amdgpu: flush the HDP only once for CPU based VM updatesChristian König
No need to do this after every single update. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-07-14drm/amdgpu: trace setting VM page tables with the CPU as wellChristian König
Handy for debugging. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-07-14drm/amdgpu: remove VM shadow WARN_ONsAlex Deucher
Printing a warning into the logs that we will certainly run into a BUG() is completely nonsense, the BUG() is more than noisy enough. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-07-14drm/amdgpu: fix amdgpu_vm_bo_waitChristian König
We need to wait with the correct owner on unmap operations or otherwise can run into VM faults. Also always wait for the page directory since this is where the reservation object comes from. So rename the function to amdgpu_vm_wait_pd instead as well. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-07-14drm/amdgpu: fix VM flush for CPU based updatesChristian König
We don't have any update fence in that case, so the need for flushing isn't detected automatically. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-07-14drm/amdgpu/gfx: keep all compute queues on the same pipeAlex Deucher
Spreading them causes performance regressions using compute queues on Polaris 11. Cc: Jim Qu <jim.qu@amd.com> Acked-by: Jim Qu <Jim.Qu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-07-14drm/amd/amdgpu: fix si_enable_smc_cac() failed issueJim Qu
Signed-off-by: Jim Qu <Jim.Qu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-07-14drm/amdgpu: Off by one sanity checksDan Carpenter
This is just future proofing code, not something that can be triggered in real life. We're testing to make sure we don't shift wrap when we do "1ull << i" so "i" has to be in the 0-63 range. If it's 64 then we have gone too far. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-07-14drm/amdgpu: implement si_read_bios_from_romAlex Deucher
This allows us to read the vbios image directly from ROM. This is already implemented for other asics, but was not yet available for SI. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-12 20:51:57 +0000