summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-11-30ARM: dts: mmp2: fix TWSI2Lubomir Rintel
Marvell keeps their MMP2 datasheet secret, but there are good clues that TWSI2 is not on 0xd4025000 on that platform, not does it use IRQ 58. In fact, the IRQ 58 on MMP2 seems to be a signal processor: arch/arm/mach-mmp/irqs.h:#define IRQ_MMP2_MSP 58 I'm taking a somewhat educated guess that is probably a copy & paste error from PXA168 or PXA910 and that the real controller in fact hides at address 0xd4031000 and uses an interrupt line multiplexed via IRQ 17. I'm also copying some properties from TWSI1 that were missing or incorrect. Tested on a OLPC XO 1.75 machine, where the RTC is on TWSI2. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30ARM: dts: mmp2: add MMC controllersLubomir Rintel
There's apparently four of them on a MMP2. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30ARM: dts: mmp2: add clock to the timerLubomir Rintel
The timer needs the timer clock to be enabled, otherwise it stops ticking. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30ARM: dts: mmp2: give gpio node a nameLubomir Rintel
This will be useful for boards that actually use GPIO pins. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30ARM: dts: mmp2: fix the gpio interrupt cell numberLubomir Rintel
gpio-pxa uses two cell to encode the interrupt source: the pin number and the trigger type. Adjust the device node accordingly. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30dt-bindings: mrvl,mmp-timer: add clockLubomir Rintel
The timer needs the timer clock to be enabled, otherwise it stops ticking. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30Merge tag 'socfpga_dts_updates_for_v5.0' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt SoCFPGA DTS updates for v5.0 - Use SPDX license identifier for all SoCFPGA DTS files. - Remove dma-mask property as it has been deprecated. - Use tabs in DTS files. - Use the specific "altr,stratix10-rst-mgr" property for the Stratix10 reset manager. * tag 'socfpga_dts_updates_for_v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: stratix10: use "altr,stratix10-rst-mgr" binding ARM: dts: socfpga: use tabs for indentation arm: dts: socfpga: remove dma-mask property arm: dts: socfpga*.dts*: use SPDX-License-Identifier Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30Merge tag 'renesas-arm64-dt-for-v4.21' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Renesas ARM64 Based SoC DT Updates for v4.21 * H3 (r8a7795) SoC: - Remove unneeded sound #address/size-cells * M3-W (r8a7796) SoC: - Describe CMT (Compare Match Timer) devices in DT - Describe I2C-DVFS device node in DT * M3-N (r8a77965) SoC: - Describe CAN, CANFD and LVDS in DT * R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs: - Describe CPU topology, capacity and cooling maps in DT - Add SSIU support to R-Car audio * R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs: - Extend register range of HSUSB device to match documentation * R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based Salvator-X, Salvator-XS and ULCB boards: - Switch eMMC bus to 1V8 * R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based Salvator-X and Salvator-XS boards: - Describe USB3.0 xHCI host and prerepheral devices as companions * R-Car E3 (r8a77990) SoC: - Add thermal support - Add support for interupt controller for external devices (INTC-EX) - Describe all SCIF devices and SYS-DMA for I2C and MSIOF devices * R-Car E3 (r8a77990) based Ebisu board: - Enable SDHI, CAN, CANFD, audio and USB3.0 - Describe serial console pins * R-Car E3 (r8a77990) based Ebisu and R-Car D3 (r8a77995) based Draak board: - Enable USB2.0 peripheral device * R-Car M3-N (r8a77965), E3 (r8a77990) and V3H (r8a77980) SoCs: - Connect EtherAVB to IPMMU * R-Car V3M (r8a77970) and V3H (r8a77980) SoCs: - Describe TMU (timer unit), PWM timer controller and MSIOF devides in DT - Add thermal support * RZ/G2M (r8a774a1) SoC: - Use clock and power index macros - Describe VIN, CSI-2 and CAN devices in DT * tag 'renesas-arm64-dt-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (40 commits) arm64: dts: renesas: Add all CPUs in cooling maps arm64: dts: renesas: r8a77990: add thermal device support arm64: dts: renesas: r8a77990: Enable I2C DMA arm64: dts: renesas: r8a7796: Add CMT device nodes arm64: dts: renesas: r8a7796: add SSIU support for sound arm64: dts: renesas: r8a77990: Add I2C-DVFS device node arm64: dts: renesas: r8a77990: ebisu: Add and enable CAN,FD device nodes arm64: dts: renesas: r8a77965: Add CAN and CANFD controller nodes arm64: dts: renesas: r8a77990: ebisu: Add and enable PCIe device node arm64: dts: renesas: Add CPU capacity-dmips-mhz arm64: dts: renesas: Add CPU topology on R-Car Gen3 SoCs arm64: dts: renesas: r8a774a1: Replace clock magic numbers arm64: dts: renesas: r8a774a1: Replace power magic numbers arm64: dts: renesas: r8a7795: add SSIU support for sound arm64: dts: renesas: r8a77990: Fix VIN endpoint numbering arm64: dts: renesas: ebisu: Add and enable SDHI device nodes arm64: dts: renesas: ebisu: Add serial console pins arm64: dts: renesas: Switch eMMC bus to 1V8 on Salvator-X and ULCB arm64: dts: renesas: r8a77990: Add all HSCIF nodes arm64: dts: renesas: r8a779{7|8}0: add TMU support ... Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30Merge tag 'renesas-arm-dt-for-v4.21' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Renesas ARM Based SoC DT Updates for v4.21 * RZ/N1D (r9a06g032) SoC: - Correct GIC DT node name - Enable pin controller * RZ/G1C (r8a77470) iWave g23S single board computer - Add QSPI flash support - Add pinctl support for EtherAVB - Enable CMT0 (Renesas R-Car Compare Match Timer) - Enable RWDT (Renesas Watchdog Timer) - Enable uSD and eMMC support * RZ/G1C (r8a77470) SoC: - Describe USB-DMAC and I2C devices in DT * R-Mobile A1 (r8a7740), Emma Mobile EV2 (emev2) and SH-Mobile AG5 (sh72a0) SoCs: - Include SoC name in DTSI * R-Car H2 (r8a7790) based lager, and R-Car M2-W (r8a7791) based koelsch and porter boards: - Disable unconnected LVDS encoders * tag 'renesas-arm-dt-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: dts: r9a06g032: Correct the GIC DT node name ARM: dts: iwg23s-sbc: Add QSPI flash support ARM: dts: r8a77470: Add QSPI support ARM: dts: iwg23s-sbc: Add pinctl support for EtherAVB ARM: dts: iwg23s-sbc: Enable cmt0 ARM: dts: r8a77470: Add CMT SoC specific support ARM: dts: r8a77470: Add USB-DMAC device nodes ARM: dts: iwg23s-sbc: Enable watchdog support ARM: dts: r8a77470: Add watchdog support to SoC dtsi ARM: dts: r8a7740, emev2, sh73a0: Include SoC name in DTSI ARM: dts: r8a779[01]: Disable unconnected LVDS encoders ARM: dts: iwg23s-sbc: Add uSD and eMMC support ARM: dts: r8a77470: Add SDHI1 support ARM: dts: r8a77470: Add SDHI0 support ARM: dts: r8a77470: Add I2C[0123] support ARM: dts: r9a06g032: Add pinctrl node Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30Merge tag 'v4.21-rockchip-dts64-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt New dts for Gru-Scarlet (tablet device), default backlight brightness for all Gru devices, rk3399 spi dma properties, some improvements for the rk3399-sapphire board (fan, chosen, backlight), hs200 mode for the emmc on the rock64 and declaring all cpu cores in the cooling maps instead of just cpu0. * tag 'v4.21-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add all CPUs in cooling maps arm64: dts: rockchip: add Gru Scarlet devicetrees arm64: dts: rockchip: move backlight from rk3399 sapphire to excavator arm64: dts: rockchip: Use default brightness table for rk3399-gru arm64: dts: rockchip: add chosen node on rk3399-sapphire arm64: dts: rockchip: enable HS200 for eMMC on rock64 arm64: dts: rockchip: add fan on rk3399-sapphire board arm64: dts: rockchip: add rk3399 SPI DMAs Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30Merge tag 'v4.21-rockchip-dts32-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Powerdomain and QoS nodes for rk3066 and rk3188. A fix for a rock2 regulator name and referencing all cpus in the cooling maps instead of only cpu0. * tag 'v4.21-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add all CPUs in cooling maps ARM: dts: rockchip: Fix rk3288-rock2 vcc_flash name ARM: dts: rockchip: add rk3066/rk3188 power-domains ARM: dts: rockchip: add qos nodes found on rk3066 and rk3188 dt-bindings: add power-domain header for RK3066 SoCs dt-bindings: add power-domain header for RK3188 SoCs Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30Merge tag 'vexpress-updates-4.20' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt ARMv7 Vexpress updates for v4.20 Single patch to use updated coresight graph bindings thereby removing loads of dtc warnings * tag 'vexpress-updates-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: ARM: dts: vexpress/TC2: Update entries to match latest coresight bindings Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30ARM: dts: BCM5301X: Describe Northstar pins mux controllerRafał Miłecki
This describes hardware & will allow referencing pin functions. The first usage is UART1 which allows supporting devices using it. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-11-30ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2René Kjellerup
It is wireless home router based on BCM4708A0 with BCM4360 + BCM4331 wireless chipsets. The BCM4331 5GHz chip currently isn't supported only due to missing compatible firmware. Signed-off-by: Rene Kjellerup <rk.katana.steel@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-11-30arm64: dts: marvell: armada37xx: Add emmc/sdio pinctrl definitionDing Tao
Add emmc/sdio pinctrl definition for marvell armada37xx SoCs. Signed-off-by: Ding Tao <miyatsu@qq.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-11-30arm64: dts: clearfog-gt-8k: enable mini-PCIe CON2 USBBaruch Siach
Deassert the reset and wireless disable signals on the CON2 mini-PCIe socket. That allows the host to detect USB devices on the mini-PCIe socket. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-11-30arm64: dts: clearfog-gt-8k: 1G eth PHY reset signalBaruch Siach
This reset signal controls the Marvell 1512 1G PHY. Note that current implementation queries the PHY over the MDIO bus (get_phy_device() call from of_mdiobus_register_phy()) before reset signal deassert. If the PHY reset signal is asserted at boot time, PHY registration fails. So current code relies on the bootloader to deassert the reset signal. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-11-30arm64: dts: clearfog-gt-8k: fix USB regulator gpio polarityBaruch Siach
The fixed regulator driver ignores the gpio flags, so this change has no practical effect in the current implementation. Fix it anyway to correct the hardware description. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-11-30arm64: dts: qcom: msm8998: Fix compatible of scm nodeBjorn Andersson
The scm binding and driver was updated to rely on the fallback to the default qcom,scm for any modern SoC and as such both are required. Add the default compatible to make the scm instance probe. Fixes: d850156a226a ("arm64: dts: qcom: msm8998: Add firmware node") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-30arm64: dts: renesas: r8a7795-es1: Add missing power domains to IPMMU nodesGeert Uytterhoeven
While commit 3b7e7848f0e88b36 ("arm64: dts: renesas: r8a7795: Add IPMMU device nodes") for R-Car H3 ES2.0 did include power-domains properties, they were forgotten in the counterpart for older R-Car H3 ES1.x SoCs. Fixes: e4b9a493df45075b ("arm64: dts: renesas: r8a7795-es1: Add IPMMU device nodes") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-30arm64: dts: renesas: r8a77965: Remove non-existent IPMMU-IRGeert Uytterhoeven
The R-Car Gen3 HardWare Manual Errata for Rev. 1.00 (Aug 24, 2018) removed the IPMMU-IR IOMMU instance on R-Car M3-N, as this SoC does not have an Image Processing Unit (IMP-X5) nor the A3IR power domain. Fixes: 55697cbb44e4f7ea ("arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-30arm64: dts: allwinner: a64: pinebook: enable power suppliesVasily Khoruzhick
Pinebook has ACIN connector and 10000 mAh battery. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Oskari Lemmela <oskari@lemmela.net> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-11-30arm64: dts: allwinner: a64: sopine-baseboard: enable power suppliesOskari Lemmela
AXP803 ACIN pins are routed from SOM to the DC jack on the baseboard. AXP803 charger pins BATSENSE, LOADSENSE, N_BATDRV, LX_CHG, VIN_CHG and IPSOUT are connected via PMOS driver to SOM VBAT pins. VBAT and AXP803 TS pins are routed to the baseboard 3-pin battery connector. Signed-off-by: Oskari Lemmela <oskari@lemmela.net> Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-11-30arm64: dts: allwinner: axp803: add AC and battery power suppliesOskari Lemmela
Parts of the AXP803 are compatible with their counterparts on the AXP813. Add DT nodes ADC, GPIO, AC and battery power supplies. Signed-off-by: Oskari Lemmela <oskari@lemmela.net> Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-11-30ARM: dts: axp81x: add AC power supply subnodeOskari Lemmela
Add AC power supply subnode for AXP81X PMIC. Signed-off-by: Oskari Lemmela <oskari@lemmela.net> Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-11-29arm64: dts: qcom: msm8998: Add SDC2 control pinsJeffrey Hugo
The SDC2 control pins are typically used to manage sleep. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-29arm64: dts: qcom: msm8998-mtp: Add external SDJeffrey Hugo
The externally accessible SD card slot on the MTP is driven by SDCC2. Wire it up for use. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-29arm64: dts: qcom: msm8998: Add SDCC2Jeffrey Hugo
SDCC2 is typically used as the controller for an external SD card slot. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-29arm64: dts: qcom: msm8998: correct xo clock nameJeffrey Hugo
The root parent clock of most msm8998 clock is the "xo" clock. The DT node is incorrectly named "xo_board", which prevents Linux from correctly parsing the clock tree, resulting in most clocks being unparented and unable to be manipulated. The end result is that we can't turn on clocks for peripherals like SD, so init usually fails. Fixes: 4807c71cc688 (arm64: dts: Add msm8998 SoC and MTP board support) Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-29Merge branch 'qcs404-topic-revised' into arm64-for-4.21-3Andy Gross
2018-11-29Merge branch 'arm64-for-4.21' into arm64-for-4.21-3Andy Gross
2018-11-29Merge tag 'qcom-fixes-for-4.20-rc1' into arm64-for-4.21-3Andy Gross
Qualcomm ARM64 DT Fixes for 4.20-rc1 * Fix reserved gpio ranges for SDM845 and MSM8998
2018-11-29arm64: dts: meson-gx: Add Internal Clock Measurer nodeNeil Armstrong
The Amlogic Meson GX SoCs embeds a clock measurer IP to measure the internal clock paths frequencies. This patch adds the node in the top-level meson-gx dtsi. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: amlogic: Add all CPUs in cooling mapsViresh Kumar
Each CPU can (and does) participate in cooling down the system but the DT only captures a handful of them, normally CPU0, in the cooling maps. Things work by chance currently as under normal circumstances its the first CPU of each cluster which is used by the operating systems to probe the cooling devices. But as soon as this CPU ordering changes and any other CPU is used to bring up the cooling device, we will start seeing failures. Also the DT is rather incomplete when we list only one CPU in the cooling maps, as the hardware doesn't have any such limitations. Update cooling maps to include all devices affected by individual trip points. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson: add libretech aml-s805x-ac boardNeil Armstrong
Add Libretech aml-s805x-ac board (aka 'La Frite') support Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29dt-bindings: arm: amlogic: add libretech aml-s805x-ac bindingsJerome Brunet
Add bindings for the Libretech aml-s805x-ac board, aka 'La Frite'. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29dt-bindings: arm: amlogic: Add Phicomm N1He Yangxuan
Add bindings documentation for the Phicomm N1. Signed-off-by: He Yangxuan <yangxuan8282@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29dt-bindings: Add vendor prefix for PHICOMM Co., Ltd.He Yangxuan
PHICOMM Co., Ltd. is a hardware provider headquartered in Shanghai, it's product includes router and smart devices. Signed-off-by: He Yangxuan <yangxuan8282@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson-gxl: add support for phicomm n1He Yangxuan
This patch adds support for the Phicomm N1. This device based on P230 reference design. And this box doesn't have cvbs, so disable related section in device tree. Signed-off-by: He Yangxuan <yangxuan8282@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson: consistently disable pin biasJerome Brunet
On Amlogic chipsets, the bias set through pinconf applies to the pad itself, not only the GPIO function. This means that even when we change the function of the pad from GPIO to anything else, the bias previously set still applies. As we have seen with the eMMC, depending on the bias type and the function, it may trigger problems. The underlying issue is that we inherit whatever was left by previous user of the pad (pinconf, u-boot or the ROM code). As a consequence, the actual setup we will get is undefined. There is nothing mentioned in the documentation about pad bias and pinmux function, however leaving it undefined is not an option. This change consistently disable the pad bias for every pinmux functions. It seems to work well, we can only assume that the necessary bias (if any) is already provided by the pin function itself. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson: disable pad bias for mmc pinmuxesJerome Brunet
In some cases (such as a boot from SPI) the bootloader or the ROM code may leave a bias pull-down on the mmc pins. If so the MMC will fail during the initialisation. Explicitly disabling the pinmux solves the problem. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson: remove extra subnode in mmc clk_gate pinmuxJerome Brunet
In the pinmux of the mmc clk_gate nodes, we define 2 subnodes. One for the function definition, the other for the bias. This is not necessary since we can define the function and the bias in the same subnode. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson: s400: add bcm bluetooth deviceJerome Brunet
Add broadcom bluetooth device on the s400 Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson: p230: disable advertisement EEE for GbE.He Yangxuan
This patch disable EEE advertisement for P230 board (DWMAC + RTL8211F). If not disable it, the network connection is not stable, will got issues like throughput drop or broken link. Signed-off-by: He Yangxuan <yangxuan8282@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson-axg: enable SCPIJerome Brunet
Enable SCPI on the axg platform, with cpu clock and hwmon (core temperature) support Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29Documentation: bindings: Add missing Amlogic SCPI sensor bindingsJerome Brunet
amlogic,meson-gxbb-scpi-sensors is both the driver and DT but is not documented. Just add it to amlogic's scpi documentation Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson-axg: correct sram shared mem unit-addressJerome Brunet
Correct the unit-address in the node name of the SRAM shared memory Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson-axg: fix mailbox addressJerome Brunet
MHU mailbox address is wrong. Fixing it enables the mailboxes on the A113. These mailboxes are needed for SCPI Fixes: 9d59b708500f ("arm64: dts: meson-axg: add initial A113D SoC DT support") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supplyNeil Armstrong
The hdmi_5v regulator must be enabled to provide power to the physical HDMI PHY and enables the HDMI 5V presence loopback for the monitor. Fixes: b409f625a6d5 ("ARM64: dts: meson-gx: Add HDMI_5V regulator on selected boards") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson-axg: add secure monitorJerome Brunet
Add the secure monitor device to the axg platform. With this, we can read the SoC serial number. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
generated by cgit (git 2.34.1) at 2025-09-19 09:23:41 +0000