| Age | Commit message (Collapse) | Author |
|---|
|
Add the virtio_rtc module and driver core. The virtio_rtc module implements
a driver compatible with the proposed Virtio RTC device specification.
The Virtio RTC (Real Time Clock) device provides information about current
time. The device can provide different clocks, e.g. for the UTC or TAI time
standards, or for physical time elapsed since some past epoch. The driver
can read the clocks with simple or more accurate methods.
Implement the core, which interacts with the Virtio RTC device. Apart from
this, the core does not expose functionality outside of the virtio_rtc
module. Follow-up patches will expose PTP clocks and an RTC Class device.
Provide synchronous messaging, which is enough for the expected time
synchronization use cases through PTP clocks (similar to ptp_kvm) or RTC
Class device.
Signed-off-by: Peter Hilber <quic_philber@quicinc.com>
Message-Id: <20250509160734.1772-2-quic_philber@quicinc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Use the bvec_kmap_local helper rather than digging into the bvec
internals.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20250501142244.2888227-1-hch@lst.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct kvec *", but the returned type will be
"struct iovec *". These have the same allocation size, so there is no
bug:
struct kvec {
void *iov_base; /* and that should *never* hold a userland pointer */
size_t iov_len;
};
struct iovec
{
void __user *iov_base; /* BSD uses caddr_t (1003.1g requires void *) */
__kernel_size_t iov_len; /* Must be size_t (1003.1g) */
};
Adjust the allocation type to match the assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Message-Id: <20250426062214.work.334-kees@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The result size returned by virtio_pci_admin_dev_parts_get() is 8 bytes
larger than the actual result data size. This occurs because the
result_sg_size field of the command is filled with the result length
from virtqueue_get_buf(), which includes both the data size and an
additional 8 bytes of status.
This oversized result size causes two issues:
1. The state transferred to the destination includes 8 bytes of extra
data at the end.
2. The allocated buffer in the kernel may be smaller than the returned
size, leading to failures when reading beyond the allocated size.
The commit fixes this by subtracting the status size from the result of
virtqueue_get_buf().
This fix has been tested through live migrations with virtio-net,
virtio-net-transitional, and virtio-blk devices.
Fixes: 704806ca400e ("virtio: Extend the admin command to include the result size")
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <1745318025-23103-1-git-send-email-israelr@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
PCI region request functions such as pci_request_region() currently have
the problem of becoming sometimes managed functions, if
pcim_enable_device() instead of pci_enable_device() was called. The PCI
subsystem wants to remove this deprecated behavior from its interfaces.
octeopn_ep enables its device with pcim_enable_device() (for VF. PF uses
manual management), but does so only to get automatic disablement. The
driver wants to manage its PCI resources for VF manually, without devres.
The easiest way not to use automatic resource management at all is by
also handling device enable- and disablement manually.
Replace pcim_enable_device() with pci_enable_device(). Add the necessary
calls to pci_disable_device().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Acked-by: Vamsi Attunuru <vattunuru@marvell.com>
Message-Id: <20250508085134.24084-2-phasta@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Philipp Stanner <<a href="mailto:phasta@kernel.org" target="_blank">phasta@kernel.org</a>><br>
Acked-by: Vamsi Attunuru <<a href="mailto:vattunuru@marvell.com" target="_blank">vattunuru@marvell.com</a>><br>
|
|
This reverts commit d6e020819612a4a06207af858e0978be4d3e3140.
The IS_DGFX check was put in place because error capture of buffer
objects is expected to be broken on devices with VRAM.
Userspace fix[1] to the impacted media driver has been submitted, merged
and a new driver release is out as 25.2.3 where the capture flag is
dropped on DG1 thus unblocking the usage of media driver on DG1.
[1] https://github.com/intel/media-driver/commit/93c07d9b4b96a78bab21f6acd4eb863f4313ea4a
Cc: stable@vger.kernel.org # v6.0+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250522064127.24293-1-joonas.lahtinen@linux.intel.com
[Joonas: Update message to point out the merged userspace fix]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit d2dc30e0aa252830f908c8e793d3139d51321370)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The intel-media-driver is currently broken on DG1 because
it uses EXEC_CAPTURE with recovarable contexts. Relax the
check to allow that.
I've also submitted a fix for the intel-media-driver:
https://github.com/intel/media-driver/pull/1920
Cc: stable@vger.kernel.org # v6.0+
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Testcase: igt/gem_exec_capture/capture-invisible
Fixes: 71b1669ea9bd ("drm/i915/uapi: tweak error capture on recoverable contexts")
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250411144313.11660-2-ville.syrjala@linux.intel.com
(cherry picked from commit d6e020819612a4a06207af858e0978be4d3e3140)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Reported an IO hang and unrecoverable error in our testing environment.
After careful research, we found that bch_allocator_thread is stuck,
the call stack is as follows:
[<0>] __switch_to+0xbc/0x108
[<0>] __closure_sync+0x7c/0xbc [bcache]
[<0>] bch_prio_write+0x430/0x448 [bcache]
[<0>] bch_allocator_thread+0xb44/0xb70 [bcache]
[<0>] kthread+0x124/0x130
[<0>] ret_from_fork+0x10/0x18
Moreover, the RESERVE_BTREE type bucket slot are empty and journal_full
occurs at the same time.
When the cache disk is first used, the sb.nJournal_buckets defaults to 0.
So, only 8 RESERVE_BTREE type buckets are reserved. If RESERVE_BTREE type
buckets used up or btree_check_reserve() failed when request handle btree
split, the request will be repeatedly retried and wait for alloc thread to
fill in.
After the alloc thread fills the buckets, it will call bch_prio_write().
If journal_full occurs simultaneously at this time, journal_reclaim() and
btree_flush_write() will be called sequentially, journal_write cannot be
completed.
This is a low probability event, we believe that reserve more RESERVE_BTREE
buckets can avoid the worst situation.
Fixes: 682811b3ce1a ("bcache: fix for allocator and register thread race")
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Coly Li <colyli@kernel.org>
Link: https://lore.kernel.org/r/20250527051601.74407-4-colyli@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove constants MAX_NEED_GC and MAX_SAVE_PRIO in btree.c that have been unused
since initial commit.
Signed-off-by: Robert Pang <robertpang@google.com>
Signed-off-by: Coly Li <colyli@kernel.org>
Link: https://lore.kernel.org/r/20250527051601.74407-3-colyli@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
1. LINE#1794 - LINE#1887 is some codes about function of
bch_cache_set_alloc().
2. LINE#2078 - LINE#2142 is some codes about function of
register_cache_set().
3. register_cache_set() will call bch_cache_set_alloc() in LINE#2098.
1794 struct cache_set *bch_cache_set_alloc(struct cache_sb *sb)
1795 {
...
1860 if (!(c->devices = kcalloc(c->nr_uuids, sizeof(void *), GFP_KERNEL)) ||
1861 mempool_init_slab_pool(&c->search, 32, bch_search_cache) ||
1862 mempool_init_kmalloc_pool(&c->bio_meta, 2,
1863 sizeof(struct bbio) + sizeof(struct bio_vec) *
1864 bucket_pages(c)) ||
1865 mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size) ||
1866 bioset_init(&c->bio_split, 4, offsetof(struct bbio, bio),
1867 BIOSET_NEED_BVECS|BIOSET_NEED_RESCUER) ||
1868 !(c->uuids = alloc_bucket_pages(GFP_KERNEL, c)) ||
1869 !(c->moving_gc_wq = alloc_workqueue("bcache_gc",
1870 WQ_MEM_RECLAIM, 0)) ||
1871 bch_journal_alloc(c) ||
1872 bch_btree_cache_alloc(c) ||
1873 bch_open_buckets_alloc(c) ||
1874 bch_bset_sort_state_init(&c->sort, ilog2(c->btree_pages)))
1875 goto err;
^^^^^^^^
1876
...
1883 return c;
1884 err:
1885 bch_cache_set_unregister(c);
^^^^^^^^^^^^^^^^^^^^^^^^^^^
1886 return NULL;
1887 }
...
2078 static const char *register_cache_set(struct cache *ca)
2079 {
...
2098 c = bch_cache_set_alloc(&ca->sb);
2099 if (!c)
2100 return err;
^^^^^^^^^^
...
2128 ca->set = c;
2129 ca->set->cache[ca->sb.nr_this_dev] = ca;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...
2138 return NULL;
2139 err:
2140 bch_cache_set_unregister(c);
2141 return err;
2142 }
(1) If LINE#1860 - LINE#1874 is true, then do 'goto err'(LINE#1875) and
call bch_cache_set_unregister()(LINE#1885).
(2) As (1) return NULL(LINE#1886), LINE#2098 - LINE#2100 would return.
(3) As (2) has returned, LINE#2128 - LINE#2129 would do *not* give the
value to c->cache[], it means that c->cache[] is NULL.
LINE#1624 - LINE#1665 is some codes about function of cache_set_flush().
As (1), in LINE#1885 call
bch_cache_set_unregister()
---> bch_cache_set_stop()
---> closure_queue()
-.-> cache_set_flush() (as below LINE#1624)
1624 static void cache_set_flush(struct closure *cl)
1625 {
...
1654 for_each_cache(ca, c, i)
1655 if (ca->alloc_thread)
^^
1656 kthread_stop(ca->alloc_thread);
...
1665 }
(4) In LINE#1655 ca is NULL(see (3)) in cache_set_flush() then the
kernel crash occurred as below:
[ 846.712887] bcache: register_cache() error drbd6: cannot allocate memory
[ 846.713242] bcache: register_bcache() error : failed to register device
[ 846.713336] bcache: cache_set_free() Cache set 2f84bdc1-498a-4f2f-98a7-01946bf54287 unregistered
[ 846.713768] BUG: unable to handle kernel NULL pointer dereference at 00000000000009f8
[ 846.714790] PGD 0 P4D 0
[ 846.715129] Oops: 0000 [#1] SMP PTI
[ 846.715472] CPU: 19 PID: 5057 Comm: kworker/19:16 Kdump: loaded Tainted: G OE --------- - - 4.18.0-147.5.1.el8_1.5es.3.x86_64 #1
[ 846.716082] Hardware name: ESPAN GI-25212/X11DPL-i, BIOS 2.1 06/15/2018
[ 846.716451] Workqueue: events cache_set_flush [bcache]
[ 846.716808] RIP: 0010:cache_set_flush+0xc9/0x1b0 [bcache]
[ 846.717155] Code: 00 4c 89 a5 b0 03 00 00 48 8b 85 68 f6 ff ff a8 08 0f 84 88 00 00 00 31 db 66 83 bd 3c f7 ff ff 00 48 8b 85 48 ff ff ff 74 28 <48> 8b b8 f8 09 00 00 48 85 ff 74 05 e8 b6 58 a2 e1 0f b7 95 3c f7
[ 846.718026] RSP: 0018:ffffb56dcf85fe70 EFLAGS: 00010202
[ 846.718372] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 846.718725] RDX: 0000000000000001 RSI: 0000000040000001 RDI: 0000000000000000
[ 846.719076] RBP: ffffa0ccc0f20df8 R08: ffffa0ce1fedb118 R09: 000073746e657665
[ 846.719428] R10: 8080808080808080 R11: 0000000000000000 R12: ffffa0ce1fee8700
[ 846.719779] R13: ffffa0ccc0f211a8 R14: ffffa0cd1b902840 R15: ffffa0ccc0f20e00
[ 846.720132] FS: 0000000000000000(0000) GS:ffffa0ce1fec0000(0000) knlGS:0000000000000000
[ 846.720726] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 846.721073] CR2: 00000000000009f8 CR3: 00000008ba00a005 CR4: 00000000007606e0
[ 846.721426] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 846.721778] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 846.722131] PKRU: 55555554
[ 846.722467] Call Trace:
[ 846.722814] process_one_work+0x1a7/0x3b0
[ 846.723157] worker_thread+0x30/0x390
[ 846.723501] ? create_worker+0x1a0/0x1a0
[ 846.723844] kthread+0x112/0x130
[ 846.724184] ? kthread_flush_work_fn+0x10/0x10
[ 846.724535] ret_from_fork+0x35/0x40
Now, check whether that ca is NULL in LINE#1655 to fix the issue.
Signed-off-by: Linggang Zeng <linggang.zeng@easystack.cn>
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Coly Li <colyli@kernel.org>
Link: https://lore.kernel.org/r/20250527051601.74407-2-colyli@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the `#[cfg(CONFIG_OF)]` attribute to the top of the documentation test
block and hide it. This applies the condition to the entire test and improves
readability.
Placing configuration flags like `CONFIG_OF` at the top serves as a clear
indicator of the conditions under which the example is valid, effectively
acting like configuration metadata for the example itself.
Suggested-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/9d93c783cc4419f16dd8942a4359d74bc0149203.1748323971.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The controls between the tas5717 and tas5733 should not be shared since
the biquad and register setup is not identical. For example, writing to
0x5c on the tas5717 modifies ch2_bq[10] while on the tas5733 this is
ch1_cross_bq[3].
see https://www.ti.com/lit/ds/symlink/tas5733l.pdf and
https://www.ti.com/lit/ds/symlink/tas5717.pdf for more details on the
register maps.
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
Link: https://patch.msgid.link/20250527-tas5733-biquad-fix-v1-1-0d3d941700bb@openpixelsystems.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the first cpu_node = of_cpu_device_node_get() fails then the cleanup.h
code will try to free "state_node" but it hasn't been initialized yet.
Declare the device_nodes where they are initialized to fix this.
Fixes: 5836ebeb4a2b ("cpuidle: psci: Avoid initializing faux device if no DT idle states are present")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aDVRcfU8O8sez1x7@stanley.mountain
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The error code is not set correctly on if kasprintf() fails. On the
first iteration it would return -EINVAL and subsequent iterations
would return success. Set it to -ENOMEM.
In real life, this allocation will not fail and if it did the system
will not boot so this change is mostly to silence static checker warnings
more than anything else.
Fixes: 04f53540f791 ("ACPI: MRRM: Add /sys files to describe memory ranges")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aDVTfEm-Jch7FuHG@stanley.mountain
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Call acpi_put_table() before returning the error code.
Fixes: e54b1dc1c4f0 ("ACPI: APEI: EINJ: Remove redundant calls to einj_get_available_error_type()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aDVRBok33LZhXcId@stanley.mountain
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add bindings for the SOPHGO SG2042 SPI-NOR flash controller,
which is compatible with SOPHGO SG2044.
Signed-off-by: Zixian Zeng <sycamoremoon376@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://patch.msgid.link/20250525-sfg-spifmc-v2-1-a3732b6f5ab4@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the zoned mode there's a bug in the extent buffer tree conversion to
xarray. The reference for eb is dropped and code continues but the
references get dropped by releasing the batch.
Reported-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/linux-btrfs/202505191521.435b97ac-lkp@intel.com/
Fixes: 19d7f65f032f ("btrfs: convert the buffer_radix to an xarray")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
* for-next/vdso:
arm64: vdso: Use __arch_counter_get_cntvct()
|
|
* for-next/sme-fixes: (35 commits)
arm64/fpsimd: Allow CONFIG_ARM64_SME to be selected
arm64/fpsimd: ptrace: Gracefully handle errors
arm64/fpsimd: ptrace: Mandate SVE payload for streaming-mode state
arm64/fpsimd: ptrace: Do not present register data for inactive mode
arm64/fpsimd: ptrace: Save task state before generating SVE header
arm64/fpsimd: ptrace/prctl: Ensure VL changes leave task in a valid state
arm64/fpsimd: ptrace/prctl: Ensure VL changes do not resurrect stale data
arm64/fpsimd: Make clone() compatible with ZA lazy saving
arm64/fpsimd: Clear PSTATE.SM during clone()
arm64/fpsimd: Consistently preserve FPSIMD state during clone()
arm64/fpsimd: Remove redundant task->mm check
arm64/fpsimd: signal: Use SMSTOP behaviour in setup_return()
arm64/fpsimd: Add task_smstop_sm()
arm64/fpsimd: Factor out {sve,sme}_state_size() helpers
arm64/fpsimd: Clarify sve_sync_*() functions
arm64/fpsimd: ptrace: Consistently handle partial writes to NT_ARM_(S)SVE
arm64/fpsimd: signal: Consistently read FPSIMD context
arm64/fpsimd: signal: Mandate SVE payload for streaming-mode state
arm64/fpsimd: signal: Clear PSTATE.SM when restoring FPSIMD frame only
arm64/fpsimd: Do not discard modified SVE state
...
|
|
* for-next/selftests:
kselftest/arm64: Set default OUTPUT path when undefined
kselftest/arm64: fp-ptrace: Adjust to new inactive mode behaviour
kselftest/arm64: fp-ptrace: Adjust to new VL change behaviour
kselftest/arm64: tpidr2: Adjust to new clone() behaviour
kselftest/arm64: fp-ptrace: Fix expected FPMR value when PSTATE.SM is changed
|
|
* for-next/psci:
firmware: psci: Fix refcount leak in psci_dt_init
|
|
* for-next/perf:
perf/arm-cmn: Add CMN S3 ACPI binding
perf/arm-cmn: Initialise cmn->cpu earlier
perf/amlogic: Replace smp_processor_id() with raw_smp_processor_id() in meson_ddr_pmu_create()
perf/arm-cmn: Fix REQ2/SNP2 mixup
perf: Do not enable by default during compile testing
perf: arm-ni: Fix missing platform_set_drvdata()
perf: arm-ni: Unregister PMUs on probe failure
perf/arm-cmn: Remove CMN-600 DTC domain special case
|
|
* for-next/mm:
arm64/boot: Disallow BSS exports to startup code
arm64/boot: Move global CPU override variables out of BSS
arm64/boot: Move init_pgdir[] and init_idmap_pgdir[] into __pi_ namespace
arm64: mm: Drop redundant check in pmd_trans_huge()
arm64/mm: Permit lazy_mmu_mode to be nested
arm64/mm: Disable barrier batching in interrupt contexts
arm64/mm: Batch barriers when updating kernel mappings
mm/vmalloc: Enter lazy mmu mode while manipulating vmalloc ptes
arm64/mm: Support huge pte-mapped pages in vmap
mm/vmalloc: Gracefully unmap huge ptes
mm/vmalloc: Warn on improper use of vunmap_range()
arm64/mm: Hoist barriers out of set_ptes_anysz() loop
arm64: hugetlb: Use __set_ptes_anysz() and __ptep_get_and_clear_anysz()
arm64/mm: Refactor __set_ptes() and __ptep_get_and_clear()
mm/page_table_check: Batch-check pmds/puds just like ptes
arm64: hugetlb: Refine tlb maintenance scope
arm64: hugetlb: Cleanup huge_pte size discovery mechanisms
arm64: pageattr: Explicitly bail out when changing permissions for vmalloc_huge mappings
arm64: Support ARM64_VA_BITS=52 when setting ARCH_MMAP_RND_BITS_MAX
arm64/mm: Remove randomization of the linear map
|
|
* for-next/misc:
arm64/cpuinfo: only show one cpu's info in c_show()
arm64: Extend pr_crit message on invalid FDT
arm64: Kconfig: remove unnecessary selection of CRC32
arm64: Add missing includes for mem_encrypt
|
|
Merge in for-next/fixes, as subsequent improvements to our early PI
code that disallow BSS exports depend on the 'arm64_use_ng_mappings'
fix here.
* for-next/fixes:
arm64: cpufeature: Move arm64_use_ng_mappings to the .data section to prevent wrong idmap generation
arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays
|
|
* for-next/entry:
arm64: el2_setup.h: Make __init_el2_fgt labels consistent, again
arm64: Update comment regarding values in __boot_cpu_mode
arm64/mm: Re-organise setting up FEAT_S1PIE registers PIRE0_EL1 and PIR_EL1
arm64: enable PREEMPT_LAZY
|
|
* for-next/efi:
arm64/fpsimd: Avoid unnecessary per-CPU buffers for EFI runtime calls
|
|
* for-next/cpufeature:
arm64: cputype: Add cputype definition for HIP12
arm64: Expose AIDR_EL1 via sysfs
arm64/cpufeature: Add missing id_aa64mmfr4 feature reg update
|
|
* for-next/acpi:
firmware: SDEI: Allow sdei initialization without ACPI_APEI_GHES
|
|
Fixes a probe failure that occurs when dual SPI controllers are
enabled and INTx interrupts are used. Reduces the minimum required
number of interrupt vectors to 1 and registers a shared ISR when
the allocated vectors are fewer than the number of controllers.
This change ensures that the probe succeeds even with limited
vectors, restoring INTx functionality when multiple SPI
controllers are present.
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Link: https://patch.msgid.link/20250527103244.26861-1-thangaraj.s@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
get_coeff() returns –EINVAL when no table entry matches.
The driver then uses that value as an index into coeff_div[],
causing an OOB access.
To fix lets abort the hw_params call instead.
Fixes: de2b3119f9f7 ("ASoC: codecs: add support for ES8375")
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Link: https://patch.msgid.link/20250526191820.72577-1-qasdev00@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver gets regulator supplies in probe path with
devm_regulator_bulk_get(), so should not call regulator_bulk_free() in
error and remove paths to avoid double free.
Fixes: 216d04139a6d ("ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250526-b4-b4-asoc-wcd9395-vdd-px-fixes-v1-3-0b8a2993b7d3@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Last user of wcd937x_priv->buck_supply was removed in
commit 216d04139a6d ("ASoC: codecs: wcd937x: Remove separate handling
for vdd-buck supply").
Fixes: 216d04139a6d ("ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250526-b4-b4-asoc-wcd9395-vdd-px-fixes-v1-2-0b8a2993b7d3@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver gets and enables all regulator supplies in probe path
(wcd9335_parse_dt() and wcd9335_power_on_reset()), but does not cleanup
in final error paths and in unbind (missing remove() callback). This
leads to leaked memory and unbalanced regulator enable count during
probe errors or unbind.
Fix this by converting entire code into devm_regulator_bulk_get_enable()
which also greatly simplifies the code.
Fixes: 20aedafdf492 ("ASoC: wcd9335: add support to wcd9335 codec")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250526-b4-b4-asoc-wcd9395-vdd-px-fixes-v1-1-0b8a2993b7d3@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Corrected "sages" to "messages" in the bitmap allocation description.
Fixed "competed" to "completed" in the recv path datagram handling section.
Corrected "privatee" to "private" in the multipath RDS section.
Fixed "mutlipath" to "multipath" in the transport capabilities description.
These changes improve documentation clarity and maintain consistency.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250522074413.3634446-1-alok.a.tiwari@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A representor netdev does not correspond to real hardware that needs to
be updated when setting the MAC address. The default eth_mac_addr() is
sufficient for simply updating the netdev's MAC address with validation.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747898036-1121904-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Subbaraya Sundeep says:
====================
octeontx2-pf: Do not detect MACSEC block based on silicon
Out of various silicon variants of CN10K series some have hardware
MACSEC block for offloading MACSEC operations and some do not.
AF driver already has the information of whether MACSEC is present
or not on running silicon. Hence fetch that information from
AF via mailbox message.
====================
Link: https://patch.msgid.link/1747894516-4565-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The presence of MACSEC block is currently figured out based
on the running silicon variant. This may not be correct all
the times since the MACSEC block can be fused out. Hence get
the macsec info from AF via mailbox.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747894548-4657-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
MACSEC block may be fused out on some silicons hence modify
get_hw_cap mailbox message to set a capability flag in its
response message based on MACSEC block availability.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747894528-4611-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In commit 7ead4405e06f ("xsk: convert xdp_copy_frags_from_zc() to use
page_pool_dev_alloc()"), when converting from netmem to page, I missed a
call to page_address() around skb_frag_page(frag) to get the virtual
address of the page. This commit uses skb_frag_address() helper to fix
the issue.
Fixes: 7ead4405e06f ("xsk: convert xdp_copy_frags_from_zc() to use page_pool_dev_alloc()")
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20250522040115.5057-1-minhquangbui99@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Syzkaller reports the following issue:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:578
__mutex_lock+0x106/0xe80 kernel/locking/mutex.c:746
team_change_rx_flags+0x38/0x220 drivers/net/team/team_core.c:1781
dev_change_rx_flags net/core/dev.c:9145 [inline]
__dev_set_promiscuity+0x3f8/0x590 net/core/dev.c:9189
netif_set_promiscuity+0x50/0xe0 net/core/dev.c:9201
dev_set_promiscuity+0x126/0x260 net/core/dev_api.c:286 packet_dev_mc net/packet/af_packet.c:3698 [inline]
packet_dev_mclist_delete net/packet/af_packet.c:3722 [inline]
packet_notifier+0x292/0xa60 net/packet/af_packet.c:4247
notifier_call_chain+0x1b3/0x3e0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2214 [inline]
call_netdevice_notifiers net/core/dev.c:2228 [inline]
unregister_netdevice_many_notify+0x15d8/0x2330 net/core/dev.c:11972
rtnl_delete_link net/core/rtnetlink.c:3522 [inline]
rtnl_dellink+0x488/0x710 net/core/rtnetlink.c:3564
rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6955
netlink_rcv_skb+0x219/0x490 net/netlink/af_netlink.c:2534
Calling `PACKET_ADD_MEMBERSHIP` on an ops-locked device can trigger
the `NETDEV_UNREGISTER` notifier, which may require disabling promiscuous
and/or allmulti mode. Both of these operations require acquiring
the netdev instance lock.
Move the call to `packet_dev_mc` outside of the RCU critical section.
The `mclist` modifications (add, del, flush, unregister) are protected by
the RTNL, not the RCU. The RCU only protects the `sklist` and its
associated `sks`. The delayed operation on the `mclist` entry remains
within the RTNL.
Reported-by: syzbot+b191b5ccad8d7a986286@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b191b5ccad8d7a986286
Fixes: ad7c7b2172c3 ("net: hold netdev instance lock during sysfs operations")
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250522031129.3247266-1-stfomichev@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Michal Luczaj says:
====================
vsock: SOCK_LINGER rework
Change vsock's lingerning to wait on close() until all data is sent, i.e.
until workers picked all the packets for processing.
v5: https://lore.kernel.org/r/20250521-vsock-linger-v5-0-94827860d1d6@rbox.co
v4: https://lore.kernel.org/r/20250501-vsock-linger-v4-0-beabbd8a0847@rbox.co
v3: https://lore.kernel.org/r/20250430-vsock-linger-v3-0-ddbe73b53457@rbox.co
v2: https://lore.kernel.org/r/20250421-vsock-linger-v2-0-fe9febd64668@rbox.co
v1: https://lore.kernel.org/r/20250407-vsock-linger-v1-0-1458038e3492@rbox.co
Signed-off-by: Michal Luczaj <mhal@rbox.co>
====================
Link: https://patch.msgid.link/20250522-vsock-linger-v6-0-2ad00b0e447e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There was an issue with SO_LINGER: instead of blocking until all queued
messages for the socket have been successfully sent (or the linger timeout
has been reached), close() would block until packets were handled by the
peer.
Add a test to alert on close() lingering when it should not.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250522-vsock-linger-v6-5-2ad00b0e447e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a helper function that sets SO_LINGER. Adapt the caller.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250522-vsock-linger-v6-4-2ad00b0e447e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Distill the virtio_vsock_sock::bytes_unsent checking loop (ioctl SIOCOUTQ)
and move it to utils. Tweak the comment.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250522-vsock-linger-v6-3-2ad00b0e447e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Lingering should be transport-independent in the long run. In preparation
for supporting other transports, as well as the linger on shutdown(), move
code to core.
Generalize by querying vsock_transport::unsent_bytes(), guard against the
callback being unimplemented. Do not pass sk_lingertime explicitly. Pull
SOCK_LINGER check into vsock_linger().
Flatten the function. Remove the nested block by inverting the condition:
return early on !timeout.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250522-vsock-linger-v6-2-2ad00b0e447e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently vsock's lingering effectively boils down to waiting (or timing
out) until packets are consumed or dropped by the peer; be it by receiving
the data, closing or shutting down the connection.
To align with the semantics described in the SO_LINGER section of man
socket(7) and to mimic AF_INET's behaviour more closely, change the logic
of a lingering close(): instead of waiting for all data to be handled,
block until data is considered sent from the vsock's transport point of
view. That is until worker picks the packets for processing and decrements
virtio_vsock_sock::bytes_unsent down to 0.
Note that (some interpretation of) lingering was always limited to
transports that called virtio_transport_wait_close() on transport release.
This does not change, i.e. under Hyper-V and VMCI no lingering would be
observed.
The implementation does not adhere strictly to man page's interpretation of
SO_LINGER: shutdown() will not trigger the lingering. This follows AF_INET.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250522-vsock-linger-v6-1-2ad00b0e447e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for the MaxLinear MxL86110 Gigabit Ethernet PHY, a low-power,
cost-optimized transceiver supporting 10/100/1000 Mbps over twisted-pair
copper, compliant with IEEE 802.3.
The driver implements basic features such as:
- Device initialization
- RGMII interface timing configuration
- Wake-on-LAN support
- LED initialization and control via /sys/class/leds
This driver has been tested on multiple Variscite boards, including:
- VAR-SOM-MX93 (i.MX93)
- VAR-SOM-MX8M-PLUS (i.MX8MP)
Example boot log showing driver probe:
[ 7.692101] imx-dwmac 428a0000.ethernet eth0:
PHY [stmmac-0:00] driver [MXL86110 Gigabit Ethernet] (irq=POLL)
Signed-off-by: Stefano Radaelli <stefano.radaelli21@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250521212821.593057-1-stefano.radaelli21@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Jason A. Donenfeld says:
====================
wireguard updates for 6.16
This small series contains mostly cleanups and one new feature:
1) Kees' __nonstring annotation comes to wireguard.
2) Two selftest fixes, one to help with compilation on gcc 15, and one
removing stale config options.
3) Adoption of NLA_POLICY_MASK.
4) Jordan has added the ability to run:
# wg set ... peer ... allowed-ips -192.168.1.0/24
Which will remove the allowed IP for that peer. Previously you had to
replace all the IPs non-atomically, or move it to a dummy peer
atomically, which wasn't very clean.
====================
Link: https://patch.msgid.link/20250521212707.1767879-1-Jason@zx2c4.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
GCC 15 defaults to C23, which bash can't compile under, so specify gnu17
explicitly.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250521212707.1767879-6-Jason@zx2c4.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
