summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-07-05ARM: OMAP: omap_common_late_init may be unusedArnd Bergmann
Some OMAP SoCs use this function while others do not, and that causes a warning when building multi_v7_defconfig. Marking the function __maybe_unused silences the harmless warning without the need to add complex #ifdef logic. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Tony Lindgren <tony@atomide.com>
2013-07-05ARM: sti: move DEBUG_STI_UART into alphabetical orderArnd Bergmann
This was accidentally added in the wrong place, messing up the ordering of the file. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-07-05ARM: OMAP: build mach-omap code only if neededArnd Bergmann
If we build a kernel with CONFIG_ARCH_OMAP2PLUS enabled but all of the individual SoCs disabled, we run into a large number of link errors because if incorrect dependencies: arch/arm/mach-omap2/built-in.o: In function `_add_initiator_dep': arch/arm/mach-omap2/omap_hwmod.c:691: undefined reference to `clkdm_add_sleepdep' arch/arm/mach-omap2/built-in.o: In function `_del_initiator_dep': arch/arm/mach-omap2/omap_hwmod.c:720: undefined reference to `clkdm_del_sleepdep' arch/arm/mach-omap2/built-in.o: In function `_enable': arch/arm/mach-omap2/omap_hwmod.c:2145: undefined reference to `clkdm_in_hwsup' arch/arm/mach-omap2/omap_hwmod.c:2147: undefined reference to `clkdm_hwmod_enable' arch/arm/mach-omap2/omap_hwmod.c:2191: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/omap_hwmod.c:2146: undefined reference to `clkdm_missing_idle_reporting' arch/arm/mach-omap2/built-in.o: In function `_idle': arch/arm/mach-omap2/omap_hwmod.c:2235: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/built-in.o: In function `_shutdown': arch/arm/mach-omap2/omap_hwmod.c:2338: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/built-in.o: In function `omap_hwmod_get_context_loss_count': arch/arm/mach-omap2/omap_hwmod.c:4071: undefined reference to `pwrdm_get_context_loss_count' arch/arm/mach-omap2/built-in.o: In function `omap_pm_clkdms_setup': arch/arm/mach-omap2/pm.c:114: undefined reference to `clkdm_allow_idle' arch/arm/mach-omap2/pm.c:117: undefined reference to `clkdm_sleep' arch/arm/mach-omap2/built-in.o: In function `omap2_common_pm_late_init': arch/arm/mach-omap2/pm.c:294: undefined reference to `omap_voltage_late_init' arch/arm/mach-omap2/built-in.o: In function `omap2_gpio_dev_init': arch/arm/mach-omap2/gpio.c:133: undefined reference to `pwrdm_can_ever_lose_context' We can avoid this if we make CONFIG_ARCH_OMAP2PLUS a silent option that gets enabled any time that one of the SoC versions is enabled. Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-07-05ARM: zynq: use DT_MACHINE_STARTArnd Bergmann
The zynq platform code only supports DT based booting, so we should use DT_MACHINE_START rather than MACHINE_START. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Michal Simek <michal.simek@xilinx.com>
2013-07-05ARM: omap5: omap5 has SCU and TWDArnd Bergmann
These are selected by omap4 but used in common omap4/5 SMP code, so building an omap5-only kernel is actually broken without this patch. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Tony Lindgren <tony@atomide.com>
2013-07-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto update from Herbert Xu: - Do not idle omap device between crypto operations in one session. - Added sha224/sha384 shims for SSSE3. - More optimisations for camellia-aesni-avx2. - Removed defunct blowfish/twofish AVX2 implementations. - Added unaligned buffer self-tests. - Added PCLMULQDQ optimisation for CRCT10DIF. - Added support for Freescale's DCP co-processor - Misc fixes. * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (44 commits) crypto: testmgr - test hash implementations with unaligned buffers crypto: testmgr - test AEADs with unaligned buffers crypto: testmgr - test skciphers with unaligned buffers crypto: testmgr - check that entries in alg_test_descs are in correct order Revert "crypto: twofish - add AVX2/x86_64 assembler implementation of twofish cipher" Revert "crypto: blowfish - add AVX2/x86_64 implementation of blowfish cipher" crypto: camellia-aesni-avx2 - tune assembly code for more performance hwrng: bcm2835 - fix MODULE_LICENSE tag hwrng: nomadik - use clk_prepare_enable() crypto: picoxcell - replace strict_strtoul() with kstrtoul() crypto: dcp - Staticize local symbols crypto: dcp - Use NULL instead of 0 crypto: dcp - Use devm_* APIs crypto: dcp - Remove redundant platform_set_drvdata() hwrng: use platform_{get,set}_drvdata() crypto: omap-aes - Don't idle/start AES device between Encrypt operations crypto: crct10dif - Use PTR_RET crypto: ux500 - Cocci spatch "resource_size.spatch" crypto: sha256_ssse3 - add sha224 support crypto: sha512_ssse3 - add sha384 support ...
2013-07-05Merge tag 'upstream-3.11-rc1' of git://git.infradead.org/linux-ubiLinus Torvalds
Pull ubi fixes from Artem Bityutskiy: "A couple of fixes and clean-ups, allow for assigning user-defined UBI device numbers when attaching MTD devices by using the "mtd=" module parameter" * tag 'upstream-3.11-rc1' of git://git.infradead.org/linux-ubi: UBI: support ubi_num on mtd.ubi command line UBI: fastmap break out of used PEB search UBI: document UBI_IOCVOLUP better in user header UBI: do not abort init when ubi.mtd devices cannot be found UBI: drop redundant "UBI error" string
2013-07-05Merge tag 'upstream-3.11-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull ubifs fix from Artem Bityutskiy: "Only a single patch which fixes a message" * tag 'upstream-3.11-rc1' of git://git.infradead.org/linux-ubifs: UBIFS: correct mount message
2013-07-05mmc: bcm281xx SDHCI driverChristian Daudt
Add SDHCI driver for the Broadcom 281xx SoCs. Still missing: - power managemement Signed-off-by: Christian Daudt <csd@broadcom.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: sdhci: add card_event callback to sdhciChristian Daudt
Add a card_event callback to sdhci so that clients can provide their own card_event to be called when card_detect is triggered. Signed-off-by: Christian Daudt <csd@broadcom.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: core: Fixup Oops for SDIO shutdownUlf Hansson
Commit "mmc: core: Handle card shutdown from mmc_bus" introduced an Oops in the shutdown sequence for SDIO. The drv pointer, does not exist for SDIO since the probing of the SDIO card from the mmc_bus perspective is expected to fail by returning -ENODEV. This patch adds the proper check for the pointer before calling it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reported-by: Stephen Warren <swarren@wwwdotorg.org> Reported-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Tested-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: sdhci-pci: add another device idAdrian Hunter
Add another PCI device id for an eMMC host controller. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: esdhc: Fix bug when writing to SDHCI_HOST_CONTROL registerOded Gabbay
The P2020 has a non-standard implementation of the SDHCI_HOST_CONTROL register. This patch adds a QUIRK in the SDHCI header to signal that a host controller has a non-standard SDHCI_HOST_CONTROL register. The patch adds a check to the function esdhc_writeb in file sdhci-of-esdhc.c, where it checks if the write is done to the SDHCI_HOST_CONTROL register and th host has the above mentioned QUIRK, then the function simply returns instead of writing to the register. The patch also detects if the processor is P2020 (by looking in dev tree) and if so, adds the QUIRK to the host->quirk2 Signed-off-by: Oded Gabbay <ogabbay@advaoptical.com> Reviewed-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: esdhc: Add support for 8-bit bus width and non-removable cardOded Gabbay
This patch adds support of connecting an MMC media using an 8-bit bus width connection to Freescale's P2020 H/W SDHC controller. During the probe function, the generic function mmc_of_parse is called to detect whether the controller is configured with 8-bit bus width. Also, the generic function detects if the non-removable property is set in the device tree. The function esdhc_pltfm_bus_width was added because the bus width configuration is platform specific. Signed-off-by: Oded Gabbay <ogabbay@advaoptical.com> Reviewed-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: core: production year for eMMC 4.41 and laterRomain Izard
The field containing the production date in the CID register only uses 4 bits to encode the year, starting from 1997 in the original standard. In 2013, the production year field contains 0, and the kernel reports a 1997 production date. The eMMC 4.51 specification adds a new interpretation rule. For all devices implementing the 4.41 specification or later, the production year field will be interpreted as a value between 2010 and 2025, with 0 corresponding to 2013. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: omap: remove unnecessary #if 0'sLuciano Coelho
In commit 3451c067 (mmc: omap: add DMA engine support), some #if 0's were used to comment out parts of the code. This has been in the code for over a year and are not needed anymore (and the commented-out code doesn't even compile). Remove them. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: sdhci: fix ctrl_2 on super-speed selectionGiuseppe CAVALLARO
This patch fixes the HC ctrl_2 programming where, in case of SDR104 and HS200, we have to write 100b in the the UHS Mode bits. We wrote 101b that is reserved from Arasan Specs. Reported-by: Youssef Triki <youssef.triki@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: dw_mmc-pltfm: add Rockchip variantHeiko Stübner
Cortex-A9 SoCs from Rockchip use a slightly modified variant of dw_mmc controllers that seems to require the SDMMC_CMD_USE_HOLD_REG bit to always be set. There also seem to be no other modifications (additional register etc) present, so to keep the footprint low, add this small variant to the pltfm driver. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: dw_mmc-pltfm: move probe and remove below dt match tableHeiko Stübner
In a subsquent patch probe will need to do some handling of data from the dt match table. So to prevent the need for forward declarations, move probe and remove below the match table. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: dw_mmc-pltfm: remove static from dw_mci_pltfm_removeHeiko Stübner
dw_mci_pltfm_remove gets exported and used by dw_mmc-exynos, so should not be static. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: sdhci-acpi: add support for eMMC hardware reset for HID 80860F14Adrian Hunter
Add support for eMMC hardware reset for HID 80860F14. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: sdhci-pci: add support for eMMC hardware reset for BYT eMMC.Adrian Hunter
Add support for eMMC hardware reset for BYT eMMC. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05hrtimers: Move SMP function call to thread contextThomas Gleixner
smp_call_function_* must not be called from softirq context. But clock_was_set() which calls on_each_cpu() is called from softirq context to implement a delayed clock_was_set() for the timer interrupt handler. Though that almost never gets invoked. A recent change in the resume code uses the softirq based delayed clock_was_set to support Xens resume mechanism. linux-next contains a new warning which warns if smp_call_function_* is called from softirq context which gets triggered by that Xen change. Fix this by moving the delayed clock_was_set() call to a work context. Reported-and-tested-by: Artem Savkov <artem.savkov@gmail.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com>, Cc: Konrad Wilk <konrad.wilk@oracle.com> Cc: John Stultz <john.stultz@linaro.org> Cc: xen-devel@lists.xen.org Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-07-05lustre: kill the pointless wrapperAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-05helper for reading ->d_countAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-05[media] stb0899: restore minimal rate to 5MbaudsMauro Carvalho Chehab
According with Manu Abraham, stb0899 seek algorithm is broken for symbol rates bellow to 5Mbauds. So, revert those patches: 55b3318 [media] stb0899: allow minimum symbol rate of 2000000 2eeed77 [media] stb0899: allow minimum symbol rate of 1000000 Requested-by: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-07-05ALSA: hdspm - Added some comments and control register documentationMartin Dausel
Signed-off-by: Martin Dausel <martin.dausel@iosono-sound.com> Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - Use snd_ctl_enum_info() in snd_hdspm_info_autosync_refAdrian Knoth
Also use snd_ctl_enum_info() to fill the autosync text fields on AES32 and MADI cards (only users of snd_hdspm_info_autosync_ref). Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - Use snd_ctl_enum_info() for texts_autosyncAdrian Knoth
Also use snd_ctl_enum_info() to fill the autosync enumerated controls. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - Use snd_ctl_enum_info for most text arraysAdrian Knoth
Use snd_ctl_enum_info() to fill most of the enumerated controls. More non-trivial occurrences will follow in separate commits. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - AES32: Enable TCO supportAdrian Knoth
This patch finally enables TCO support on RME AES(32) cards. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - AES32: Report external sample rate to userspaceAdrian Knoth
This patch adds a new ALSA control to read the external sample rate from userspace on RME AES(32) cards. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - Introduce hdspm_external_rate_to_enum() helper functionAdrian Knoth
This patch refactors the code to query the external sample rate and its translation into the corresponding enum into a helper function to prevent future code duplication. A later commit will make use of this new helper function. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - AES32: Include TCO and Sync-In in proc outputAdrian Knoth
Also report TCO status and Sync-In via /proc/ on AES(32) cards. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - AES32: Enable TCO/Sync-In in snd_hdspm_put_sync_ref()Adrian Knoth
This patch enables the user to select "TCO" and "Sync In" as a preferred sync reference on RME AES(32) cards. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - AES32: Enable TCO input in hdspm_external_sample_rate()Adrian Knoth
This patch adds support to read the TCO sample rate in hdspm_external_sample_rate() on RME AES(32) cards. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - AES32: Ignore float/int format bitAdrian Knoth
As mentioned in the comment, the AES32 cards must not set the format bit, since it is used to indicate the preferred sync setting instead. We hence simply skip the corresponding part in the hw_params function. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - Enable AES32 in hdspm_get_tco_sample_rateAdrian Knoth
This patch adds AES32 specific code to hdspm_get_tco_sample_rate to query the TCO sample rate. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - Enable AES32 in hdspm_get_wc_sample_rateAdrian Knoth
This patch adds AES32 specific code to hdspm_get_wc_sample_rate() to query the wordclock frequency. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - Add prototype declarationsAdrian Knoth
This patch only introduces prototype declarations, no real change. The functions themselves are already present. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - Introduce hdspm_get_aes_sample_rate()Adrian Knoth
Helper function to return the AES sample rate class. This class needs to be translated via HDSPM_bit2freq() to get the more common representation. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - AES32: Add TCO and Sync-In text entriesAdrian Knoth
Provide the text for the two new clock options "TCO" and "Sync In" on AES32 cards. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - AIO: Drop superfluous HDSPM_AUTOSYNC_REFAdrian Knoth
The HDSPM_AUTOSYNC_REF macro is only implemented for MADI and AES32 cards, so it doesn't make sense to call it on AIO boards. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - Cosmetics, no real changeAdrian Knoth
This patch does nothing, it's sole intent is to clean up the code. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - AES32: Fix TCO sync check reportingAdrian Knoth
HDSPM_tco_lock and HDSPM_tcoLock were too close, so the previous code didn't honour the difference between the two. Let's be more verbose and use HDSPM_tcoLockMadi for MADI cards, HDSPM_tcoLockAes for AES(32) and fix the code that makes use of both. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - Create TCO readout functionAdrian Knoth
This patch separates the TCO bits from snd_hdspm_proc_read_madi(), so the new function can later be shared between MADI and AES32 cards. It's essentially only moving code around, no new functionality. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - Fix S/PDIF Sync status and frequency on RME AIOAdrian Knoth
This is a left-over mistake from old code, the correct register offset is provided in kcontrol->private_value, not in the index. Cf. RayDAT case, where it has already been corrected. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - Add support for AEBs on RME AIOAdrian Knoth
AIO cards allow to use AEB (Analogue Expansion Boards) to add four input and/or output channels. This patch adds the necessary code to detect and enable the additional I/O channels. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - Enable AD/DA/PH gains and S/PDIF-Input select on AIOAdrian Knoth
This patch uses the newly introduced HDSPM_CONTROL_TRISTATE functions to create and expose the following ALSA controls: - Gain selection for Input, Output and Phones (HiGain, +4dBu, -10dbV) - S/PDIF Input select (Coaxial, Optical, Internal) Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ALSA: hdspm - Introduce generic AIO tristate controlAdrian Knoth
AIO cards offer at least four individual settings options with three states each. Those settings are represented as two bits in the settings register with the following meaning: 0*some_base_bit --> Option value 0 1*some_base_bit --> Option value 1 2*some_base_bit --> Option value 2 3*some_base_bit --> mask to select the two involved bits This patch adds a generic ALSA control macro for such a value-to-bit pattern mapping. It will be used in a later commit to expose four new controls. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit (git 2.34.1) at 2025-10-01 11:42:48 +0000