summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-07-23claw: A claw device is a group of just 2 ccw devicesUrsula Braun
When creating a claw device, just 2 subchannels have to be grouped. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: avoid loop if ipa command response is missingUrsula Braun
If qeth issues an ipa command, but for some reasons the response never comes back, qeth reaches a timeout. Reset the irq_pending flag of the write channel in timeout handling code and trigger a recovery to avoid endless looping for the following ipa command. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: serialize sysfs-triggered device configurationsUrsula Braun
This patch serializes device removal and other sysfs-triggered configurations by moving removal of sysfs-attributes to the beginning of the remove functions. And it serializes online/offline setting and discipline-switching (causing reestablishing of the net_device) by making use of a new discipline mutex. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: Clear mac_bits field when switching between Layer 2 and Layer 3Carsten Otte
This patch fixes a problem that occurs when switching from layer 3 to layer 2 mode. Resetting this mac_bits makes sure that we retrieve our mac address from the card, otherwise the interface simply would'nt work. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: IP address takeover flag settingKlaus-Dieter Wacker
The qeth IP address flag setting is possible when device is offline. When setting device online afterwards the current set IP addresses have to be correctly registered with the device regarding the IP address takeover attribute. Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23iwlwifi: remove spurious semicolonsJohannes Berg
defines shouldn't be terminated with a semicolon, the code using them should supply it. Luckily these are not used in a context where it matters. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlwifi: reduce beacon fill conditionsJohannes Berg
Since the ibss_beacon variable will only be filled in the appropriate modes, there's no reason to be checking the mode again. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlwifi: read multiple MAC addressesWey-Yi Guy
Some devices may have multiple MAC addresses in their EEPROM, read them and advertise them to cfg80211. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-07-23iwlwifi: make iwl_mac_beacon_update staticJohannes Berg
This function is only needed in the same file it is defined in, i.e. iwl-core.c Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlagn: fix firmware loading TLV error pathJohannes Berg
gcc complains about the firmware loading: iwl-agn.c: In function ‘iwlagn_load_firmware’: iwl-agn.c:1860: warning: ‘tlv_len’ may be used uninitialized in this function iwl-agn.c:1861: warning: ‘tlv_type’ may be used uninitialized in this function iwl-agn.c:1862: warning: ‘tlv_data’ may be used uninitialized in this function This is almost correct but we do do break out of the TLV parsing loop when setting ret. However, the code is hard to follow, and clearly even the compiler is having issues with it too. Additionally, however, the current code is wrong. If there is a TLV length check error, the code will report invalid TLV after parsing: ... because "len" will still be non-zero as we broke out of the loop. So to remove the warning and fix that issue, make the code easier to read by doing length checking with an error label. As a result, we can completely remove the "ret" variable. Also, while at it, remove the "fixed_tlv_size" variable since each TLV type has its own specified length, it just happens that we have only variable length, flags (0 length) and u32 TLVs right now. It should still be checked with more explicit length checks to make it easier to understand. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlwifi: add TLV to specify the size of phy calibration tableWey-Yi Guy
Different devices have different size of phy calibration table; add new TLV to specify the size. If the TLV is not part of uCode header, the default table size will be used to make sure the backward compatibilities. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlagn: add bluetooth stats to debugfsWey-Yi Guy
For WiFi/BT combo devices, add bluetooth statistics counter read function to debugfs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlagn: Add support for bluetooth statistics notificationWey-Yi Guy
WiFi/BT combo devices has different statistics notification structure, adding the support here to make sure the structure align correctly. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlagn: add .cfg flag to idenfity the need for bt statisticsWey-Yi Guy
Only WiFi/BT combo devices need to use bluetooth version of statistics notification; adding the flag in .cfg file to indicate the need for using different data structure. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlagn: add statistic notification structure for WiFi/BT devicesWey-Yi Guy
If its WiFi/BT combo device, the statistics notification sent by uCode will include the additional BT related statistics counters. Adding new data structure to support the new layout. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23netfilter: iptables: use skb->len for accountingChangli Gao
Use skb->len for accounting as xt_quota does. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-07-23netfilter: ip6tables: use skb->len for accountingChangli Gao
ipv6_hdr(skb)->payload_len is ZERO and can't be used for accounting, if the payload is a Jumbo Payload specified in RFC2675. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-07-23xt_quota: report initial quota value instead of current value to userspaceChangli Gao
We should copy the initial value to userspace for iptables-save and to allow removal of specific quota rules. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-07-23netfilter: xt_quota: use per-rule spin lockChangli Gao
Use per-rule spin lock to improve the scalability. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-07-23netfilter: arptables: use arp_hdr_len()Changli Gao
use arp_hdr_len(). Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-07-23netfilter: nf_nat_core: merge the same linesChangli Gao
proto->unique_tuple() will be called finally, if the previous calls fail. This patch checks the false condition of (range->flags &IP_NAT_RANGE_PROTO_RANDOM) instead to avoid duplicate line of code: proto->unique_tuple(). Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-07-23netfilter: add xt_cpu matchEric Dumazet
In some situations a CPU match permits a better spreading of connections, or select targets only for a given cpu. With Remote Packet Steering or multiqueue NIC and appropriate IRQ affinities, we can distribute trafic on available cpus, per session. (all RX packets for a given flow is handled by a given cpu) Some legacy applications being not SMP friendly, one way to scale a server is to run multiple copies of them. Instead of randomly choosing an instance, we can use the cpu number as a key so that softirq handler for a whole instance is running on a single cpu, maximizing cache effects in TCP/UDP stacks. Using NAT for example, a four ways machine might run four copies of server application, using a separate listening port for each instance, but still presenting an unique external port : iptables -t nat -A PREROUTING -p tcp --dport 80 -m cpu --cpu 0 \ -j REDIRECT --to-port 8080 iptables -t nat -A PREROUTING -p tcp --dport 80 -m cpu --cpu 1 \ -j REDIRECT --to-port 8081 iptables -t nat -A PREROUTING -p tcp --dport 80 -m cpu --cpu 2 \ -j REDIRECT --to-port 8082 iptables -t nat -A PREROUTING -p tcp --dport 80 -m cpu --cpu 3 \ -j REDIRECT --to-port 8083 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-07-23IPVS: make FTP work with full NAT supportHannes Eder
Use nf_conntrack/nf_nat code to do the packet mangling and the TCP sequence adjusting. The function 'ip_vs_skb_replace' is now dead code, so it is removed. To SNAT FTP, use something like: % iptables -t nat -A POSTROUTING -m ipvs --vaddr 192.168.100.30/32 \ --vport 21 -j SNAT --to-source 192.168.10.10 and for the data connections in passive mode: % iptables -t nat -A POSTROUTING -m ipvs --vaddr 192.168.100.30/32 \ --vportctl 21 -j SNAT --to-source 192.168.10.10 using '-m state --state RELATED' would also works. Make sure the kernel modules ip_vs_ftp, nf_conntrack_ftp, and nf_nat_ftp are loaded. [ up-port and minor fixes by Simon Horman <horms@verge.net.au> ] Signed-off-by: Hannes Eder <heder@google.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-07-23IPVS: make friends with nf_conntrackHannes Eder
Update the nf_conntrack tuple in reply direction, as we will see traffic from the real server (RIP) to the client (CIP). Once this is done we can use netfilters SNAT in POSTROUTING, especially with xt_ipvs, to do source NAT, e.g.: % iptables -t nat -A POSTROUTING -m ipvs --vaddr 192.168.100.30/32 --vport 80 \ -j SNAT --to-source 192.168.10.10 [ minor fixes by Simon Horman <horms@verge.net.au> ] Signed-off-by: Hannes Eder <heder@google.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-07-23netfilter: xt_ipvs (netfilter matcher for IPVS)Hannes Eder
This implements the kernel-space side of the netfilter matcher xt_ipvs. [ minor fixes by Simon Horman <horms@verge.net.au> ] Signed-off-by: Hannes Eder <heder@google.com> Signed-off-by: Simon Horman <horms@verge.net.au> [ Patrick: added xt_ipvs.h to Kbuild ] Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-07-22wimax/i2400m: Add PID & VID for Intel WiMAX 6250Alexey Shvetsov
This version of intel wimax device was found in my IBM ThinkPad x201 Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
2010-07-22stmmac: handle allocation errors in setup functionsDan Carpenter
If the allocations fail in either dwmac1000_setup() or dwmac100_setup() then return NULL. These are called from stmmac_mac_device_setup(). The check for NULL returns in stmmac_mac_device_setup() needed to be moved forward a couple lines. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-22caif: precedence bugDan Carpenter
Negate has precedence over comparison so the original assert only checked that "rfml->fragment_size" was larger than 1 or 0. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-22bonding: don't lock when copying/clearing VLAN list on slaveJay Vosburgh
When copying VLAN information to or removing from a slave during slave addition or removal, the bonding code currently holds the bond->lock for write to prevent concurrent modification of the vlan_list / vlgrp. This is unnecessary, as all of these operations occur under RTNL. Holding the bond->lock also caused might_sleep issues for some drivers' ndo_vlan_* functions. This patch removes the extra locking. Problem reported by Michael Chan <mchan@broadcom.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-22bonding: change test for presence of VLANsJay Vosburgh
After commit ad1afb00393915a51c21b1ae8704562bf036855f ("vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)") it is now regular practice for a VLAN "add vid" for VLAN 0 to arrive prior to any VLAN registration or creation of a vlan_group. This patch updates the bonding code that tests for the presence of VLANs configured above bonding. The new logic tests for bond->vlgrp to determine if a registration has occured, instead of testing that bonding's internal vlan_list is empty. The old code would panic when vlan_list was not empty, but vlgrp was still NULL (because only an "add vid" for VLAN 0 had occured). Bonding still adds VLAN 0 to its internal list so that 802.1p frames are handled correctly on transmit when non-VLAN accelerated slaves are members of the bond. The test against bond->vlan_list remains in bond_dev_queue_xmit for this reason. Modification to the bond->vlgrp now occurs under lock (in addition to RTNL), because not all inspections of it occur under RTNL. Additionally, because 8021q will never issue a "kill vid" for VLAN 0, there is now logic in bond_uninit to release any remaining entries from vlan_list. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Pedro Garcia <pedro.netdev@dondevamos.com> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-22net/fec: restore interrupt mask after software-reset in fec_stop()Wolfram Sang
After the change from mdio polling to irq, it became necessary to restore the interrupt mask after resetting the chip in fec_stop(). Otherwise, with all irqs disabled, no communication with the PHY will be possible after e.g. un-/replugging the cable and the device gets stalled. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-223c59x: handle pci_iomap() errorsKulikov Vasiliy
pci_iomap() can fail, handle this case and return -ENOMEM from probe function. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-22net: RTA_MARK additionEric Dumazet
Add a new rt attribute, RTA_MARK, and use it in rt_fill_info()/inet_rtm_getroute() to support following commands : ip route get 192.168.20.110 mark NUMBER ip route get 192.168.20.108 from 192.168.20.110 iif eth1 mark NUMBER ip route list cache [192.168.20.110] mark NUMBER Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-22ipv6: Don't add routes to ipv6 disabled interfaces.Brian Haley
If the interface has IPv6 disabled, don't add a multicast or link-local route since we won't be adding a link-local address. Reported-by: Mahesh Kelkar <maheshkelkar@gmail.com> Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-22net: Fix skb_copy_expand() handling of ->csum_startDavid S. Miller
It should only be adjusted if ip_summed == CHECKSUM_PARTIAL. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-22net: Fix corruption of skb csum field in pskb_expand_head() of net/core/skbuff.cAndrea Shepard
Make pskb_expand_head() check ip_summed to make sure csum_start is really csum_start and not csum before adjusting it. This fixes a bug I encountered using a Sun Quad-Fast Ethernet card and VLANs. On my configuration, the sunhme driver produces skbs with differing amounts of headroom on receive depending on the packet size. See line 2030 of drivers/net/sunhme.c; packets smaller than RX_COPY_THRESHOLD have 52 bytes of headroom but packets larger than that cutoff have only 20 bytes. When these packets reach the VLAN driver, vlan_check_reorder_header() calls skb_cow(), which, if the packet has less than NET_SKB_PAD (== 32) bytes of headroom, uses pskb_expand_head() to make more. Then, pskb_expand_head() needs to adjust a lot of offsets into the skb, including csum_start. Since csum_start is a union with csum, if the packet has a valid csum value this will corrupt it, which was the effect I observed. The sunhme hardware computes receive checksums, so the skbs would be created by the driver with ip_summed == CHECKSUM_COMPLETE and a valid csum field, and then pskb_expand_head() would corrupt the csum field, leading to an "hw csum error" message later on, for example in icmp_rcv() for pings larger than the sunhme RX_COPY_THRESHOLD. On the basis of the comment at the beginning of include/linux/skbuff.h, I believe that the csum_start skb field is only meaningful if ip_csummed is CSUM_PARTIAL, so this patch makes pskb_expand_head() adjust it only in that case to avoid corrupting a valid csum value. Please see my more in-depth disucssion of tracking down this bug for more details if you like: http://puellavulnerata.livejournal.com/112186.html http://puellavulnerata.livejournal.com/112567.html http://puellavulnerata.livejournal.com/112891.html http://puellavulnerata.livejournal.com/113096.html http://puellavulnerata.livejournal.com/113591.html I am not subscribed to this list, so please CC me on replies. Signed-off-by: Andrea Shepard <andrea@persephoneslair.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-22macvtap: Limit packet queue lengthHerbert Xu
Mark Wagner reported OOM symptoms when sending UDP traffic over a macvtap link to a kvm receiver. This appears to be caused by the fact that macvtap packet queues are unlimited in length. This means that if the receiver can't keep up with the rate of flow, then we will hit OOM. Of course it gets worse if the OOM killer then decides to kill the receiver. This patch imposes a cap on the packet queue length, in the same way as the tuntap driver, using the device TX queue length. Please note that macvtap currently has no way of giving congestion notification, that means the software device TX queue cannot be used and packets will always be dropped once the macvtap driver queue fills up. This shouldn't be a great problem for the scenario where macvtap is used to feed a kvm receiver, as the traffic is most likely external in origin so congestion notification can't be applied anyway. Of course, if anybody decides to complain about guest-to-guest UDP packet loss down the track, then we may have to revisit this. Incidentally, this patch also fixes a real memory leak when macvtap_get_queue fails. Chris Wright noticed that for this patch to work, we need a non-zero TX queue length. This patch includes his work to change the default macvtap TX queue length to 500. Reported-by: Mark Wagner <mwagner@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-22CAN: Add Flexcan CAN controller driverMarc Kleine-Budde
This core is found on some Freescale SoCs and also some Coldfire SoCs. Support for Coldfire is missing though at the moment as they have an older revision of the core which does not have RX FIFO support. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2010-07-21r6040: Fix args to phy_mii_ioctl().David S. Miller
Reported by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-21vhost net: Fix warning.David S. Miller
Reported by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-21net: remove last uses of __attribute__((packed))Gustavo F. Padovan
Network code uses the __packed macro instead of __attribute__((packed)). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-21irda: Use __packed annotation instead IRDA_PACKED macroGustavo F. Padovan
Remove IRDA_PACKED macro, which maps to __attribute__((packed)). IRDA is one of the last users of __attribute__((packet)). Networking code uses __packed now. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-21drivers/net/irda: use for_each_pci_dev()Kulikov Vasiliy
Use for_each_pci_dev() to simplify the code. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-21drivers/net/qlge: Use pr_<level>, shrink text a bitJoe Perches
Add and use a few neatening macros Remove PFX Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Convert printk(KERN_ERR to pr_err( $ size drivers/net/qlge/built-in.o.* text data bss dec hex filename 116456 2312 25712 144480 23460 drivers/net/qlge/built-in.o.old 114909 2312 25728 142949 22e65 drivers/net/qlge/built-in.o.new Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-21ixgbe/igb: catch invalid VF settingsAndy Gospodarek
Some ixgbe cards put an invalid VF device ID in the PCIe SR-IOV capability. The ixgbe driver is only valid for PFs or non SR-IOV hardware. It seems that the same problem could occur on igb hardware as well, so if we discover we are trying to initialize a VF in ixbge_probe or igb_probe, print an error and exit. Based on a patch for ixgbe from Chris Wright <chrisw@sous-sol.org>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Cc: Chris Wright <chrisw@sous-sol.org> Acked-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-21mac80211: proper IBSS lockingJohannes Berg
IBSS has never had locking, instead relying on some memory barriers etc. That's hard to get right, and I think we had it wrong too until the previous patch. Since this is not performance sensitive, it doesn't make sense to have the maintenance overhead of that, so add proper locking. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-21mac80211: fix IBSS lockdep complaintJohannes Berg
Bob reported a lockdep complaint originating in the mac80211 IBSS code due to the common work struct patch. The reason is that the IBSS and station mode code have different locking orders for the cfg80211 wdev lock and the work struct (where "locking" implies running/canceling). Fix this by simply not canceling the work in the IBSS code, it is not necessary since when the REQ_RUN bit is cleared, the work will run without effect if it runs. When the interface is set down, it is flushed anyway, so there's no concern about it running after memory has been invalidated either. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=16419 Additionally, looking into this I noticed that there's a small window while the IBSS is torn down in which the work may be rescheduled and the REQ_RUN bit be set again after leave() has cleared it when a scan finishes at exactly the same time. Avoid that by setting the ssid_len to zero before clearing REQ_RUN which signals to the scan finish code that this interface is not active. Reported-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-21mac80211: refuse shared key auth when WEP is unavailableJohannes Berg
When WEP is not available, we should reject shared key authentication because it could never succeed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-21cfg80211: fix race between sysfs and cfg80211Maxime Bizon
device_add() is called before adding the phy to the cfg80211 device list. So if a userspace program uses sysfs uevents to detect new phy devices, and queries nl80211 to get phy info, it can get ENODEV even though the phy exists in sysfs. An easy workaround is to hold the cfg80211 mutex until the phy is present in sysfs/cfg80211/debugfs. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-21b43: silence phy_n sparse warningsLarry Finger
drivers/net/wireless/b43/phy_n.c:512:53: warning: cast truncates bits from constant value (ffff0fff becomes fff) drivers/net/wireless/b43/phy_n.c:765:66: warning: cast truncates bits from constant value (ffff7fff becomes 7fff) drivers/net/wireless/b43/phy_n.c:1012:38: warning: cast truncates bits from constant value (ffff00ff becomes ff) drivers/net/wireless/b43/phy_n.c:1119:38: warning: cast truncates bits from constant value (ffff0fff becomes fff) drivers/net/wireless/b43/phy_n.c:2458:56: warning: cast truncates bits from constant value (ffff7fff becomes 7fff) drivers/net/wireless/b43/phy_n.c:2933:38: warning: cast truncates bits from constant value (ffff0fff becomes fff) drivers/net/wireless/b43/phy_n.c:3294:57: warning: cast truncates bits from constant value (ffff3fff becomes 3fff) Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-14 13:47:52 +0000