summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-07-19bnx2: Call pci_enable_msix() with actual number of vectors.Michael Chan
Based on original patch by Breno Leitão <leitao@linux.vnet.ibm.com>. Allocate the actual number of vectors and make use of fewer vectors if pci_enable_msix() returns > 0. We must allocate one additional vector for the cnic driver. Cc: Breno Leitão <leitao@linux.vnet.ibm.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19bnx2: Use proper counter for net_device_stats->multicast.Michael Chan
We were using the wrong tx multicast counter instead of the rx multicast counter. Reported-by: Peter Snellman <peter.snellman@cinnober.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19ixgbe: fix version string for ixgbeDon Skidmore
Bump the version string to better reflect what is in the driver. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19ixgbe: use GFP_ATOMIC when allocating FCoE DDP context from the dma poolYi Zou
The FCoE protocol stack may hold a lock when this gets called. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19ixgbe: properly toggling netdev feature flags when disabling FCoEYi Zou
When FCoE is disabled, there is a race condition that FCoE offload is turned off but the FCoE protocol driver is still queuing I/O thinking offload support still exists. This patch toggles off corresponding FCoE netdev feature flags and notify the FCoE stack first, allowing FCoE protocol stack driver to update its flags upon NETDEV_FEAT_CHANGE so no I/O will be using offload. Also, indicate FCoE offload flags in vlan_features in ixgbe_probe once and do not toggle them in ixgbe_fcoe_enable/disable so when FCoE is created on the VLAN interface, vlan_transfer_features() would properly update the VLAN netdev features flag and notify the FCoE protocol driver for NETDEV_FEAT_CHANGE. Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19ixgbe: drop support for UDP in RSS hash generationAlexander Duyck
This change removes UDP from the supported protocols for RSS hashing. The reason for removing this protocol is because IP fragmentation was causing a network flow to be broken into two streams, one for fragmented, and one for non-fragmented and this in turn was causing out-of-order issues. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19ixgbe: dcb, set DPF bit when PFC is enabledJohn Fastabend
Set the DPF bit when PFC is enabled. This will discard PFC frames so they do not get passed up the stack. The DPF bit is set for flow control, but not priority flow control this brings pfc inline with fc. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19e1000: allow option to limit number of descriptors down to 48 per ringAlexander Duyck
This change makes it possible to limit the number of descriptors down to 48 per ring. The reason for this change is to address a variation on hardware errata 10 for 82546GB in which descriptors will be lost if more than 32 descriptors are fetched and the PCI-X MRBC is 512. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19drivers/net/82596.c: fix warningAndrew Morton
drivers/net/82596.c: In function 'i596_open': drivers/net/82596.c:1044: warning: label 'err_irq_dev' defined but not used Caused by "82596: free resources on error" Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19ks8842: Fix ks8842_tx_frame() for 16bit case.David S. Miller
As reported by Andrew: drivers/net/ks8842.c: In function 'ks8842_handle_rx': drivers/net/ks8842.c:428: warning: 'status' may be used uninitialized in this function Just use the 32-bit status for all reads, and delete the useless cast to 'int' when reading a u16 into 'len'. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19net: this_cpu_xxx conversionsEric Dumazet
Use modern this_cpu_xxx() api, saving few bytes on x86 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19smsc911x: Add spinlocks around registers accessCatalin Marinas
On SMP systems, the SMSC911x registers may be accessed by multiple CPUs and this seems to put the chip in an inconsistent state. The patch adds spinlocks to the smsc911x_reg_read, smsc911x_reg_write, smsc911x_rx_readfifo and smsc911x_tx_writefifo functions. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19bonding: avoid a warningEric Dumazet
drivers/net/bonding/bond_main.c:179:12: warning: ‘disable_netpoll’ defined but not used Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19net: Removing dead ARCH_PNX010XChristoph Egger
ARCH_PNX010X doesn't exist in Kconfig, therefore removing all references for it from the source code/Kconfig. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19net-next: vmxnet3 fixes [5/5] Respect the interrupt type in VM configurationShreyas Bhatewara
Respect the interrupt type set in VM configuration. When interrupt type is not auto, do not ignore the interrupt type set from VM configuration. Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19net-next: vmxnet3 fixes [4/5] Do not reset when the device is not openedShreyas Bhatewara
Hold rtnl_lock to get the right link state. While asynchronously resetting the device, hold rtnl_lock to get the right value from netif_running. If a reset is scheduled, and the device goes thru close and open, it may happen that reset and open may run in parallel. Holding rtnl_lock will avoid this. Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19tcp: fix crash in tcp_xmit_retransmit_queueIlpo Järvinen
It can happen that there are no packets in queue while calling tcp_xmit_retransmit_queue(). tcp_write_queue_head() then returns NULL and that gets deref'ed to get sacked into a local var. There is no work to do if no packets are outstanding so we just exit early. This oops was introduced by 08ebd1721ab8fd (tcp: remove tp->lost_out guard to make joining diff nicer). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Reported-by: Lennart Schulte <lennart.schulte@nets.rwth-aachen.de> Tested-by: Lennart Schulte <lennart.schulte@nets.rwth-aachen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-07-19net: 64bit stats for netdev_queueEric Dumazet
Since struct netdev_queue tx_bytes/tx_packets/tx_dropped are already protected by _xmit_lock, its easy to convert these fields to u64 instead of unsigned long. This completes 64bit stats for devices using them (vlan, macvlan, ...) Strictly, we could avoid the locking in dev_txq_stats_fold() on 64bit arches, but its slow path and we prefer keep it simple. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19bonding: fix bond_inet6addr_event()Eric Dumazet
After commit ad1afb0039391 (vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)), bond_inet6addr_event() might be called with a NULL bond->vlgrp pointer, and a non empty bond->vlan_list. vlan_group_get_device() is dereferencing a NULL pointer. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19s2io: Remove unnecessary memset of netdev private dataTobias Klauser
The memory for the private data is allocated using kzalloc in alloc_etherdev (or alloc_netdev_mq respectively) so there is no need to set it to 0 again. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-18sch_atm: Convert to use standard list_head facilities.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-18net: support time stamping in phy devices.Richard Cochran
This patch adds a new networking option to allow hardware time stamps from PHY devices. When enabled, likely candidates among incoming and outgoing network packets are offered to the PHY driver for possible time stamping. When accepted by the PHY driver, incoming packets are deferred for later delivery by the driver. The patch also adds phylib driver methods for the SIOCSHWTSTAMP ioctl and callbacks for transmit and receive time stamping. Drivers may optionally implement these functions. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-18net: added a BPF to help drivers detect PTP packets.Richard Cochran
Certain kinds of hardware time stamping units in both MACs and PHYs have the limitation that they can only time stamp PTP packets. Drivers for such hardware are left with the task of correctly matching skbs to time stamps. This patch adds a BPF that drivers can use to classify PTP packets when needed. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-18net: preserve ifreq parameter when calling generic phy_mii_ioctl().Richard Cochran
The phy_mii_ioctl() function unnecessarily throws away the original ifreq. We need access to the ifreq in order to support PHYs that can perform hardware time stamping. Two maverick drivers filter the ioctl commands passed to phy_mii_ioctl(). This is unnecessary since phylib will check the command in any case. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-18net: add driver hook for tx time stamping.Richard Cochran
This patch adds a hook for transmit time stamps. The transmit hook allows a software fallback for transmit time stamps, for MACs lacking time stamping hardware. Using the hook will still require adding an inline function call to each MAC driver. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-18vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)Pedro Garcia
- Without the 8021q module loaded in the kernel, all 802.1p packets (VLAN 0 but QoS tagging) are silently discarded (as expected, as the protocol is not loaded). - Without this patch in 8021q module, these packets are forwarded to the module, but they are discarded also if VLAN 0 is not configured, which should not be the default behaviour, as VLAN 0 is not really a VLANed packet but a 802.1p packet. Defining VLAN 0 makes it almost impossible to communicate with mixed 802.1p and non 802.1p devices on the same network due to arp table issues. - Changed logic to skip vlan specific code in vlan_skb_recv if VLAN is 0 and we have not defined a VLAN with ID 0, but we accept the packet with the encapsulated proto and pass it later to netif_rx. - In the vlan device event handler, added some logic to add VLAN 0 to HW filter in devices that support it (this prevented any traffic in VLAN 0 to reach the stack in e1000e with HW filter under 2.6.35, and probably also with other HW filtered cards, so we fix it here). - In the vlan unregister logic, prevent the elimination of VLAN 0 in devices with HW filter. - The default behaviour is to ignore the VLAN 0 tagging and accept the packet as if it was not tagged, but we can still define a VLAN 0 if desired (so it is backwards compatible). Signed-off-by: Pedro Garcia <pedro.netdev@dondevamos.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-18net: Remove MAX_SOCK_ADDR constantTetsuo Handa
MAX_SOCK_ADDR is no longer used because commit 230b1839 "net: Use standard structures for generic socket address structures." replaced "char address[MAX_SOCK_ADDR];" with "struct sockaddr_storage address;". Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-18arcnet: fix signed bug in probe functionDan Carpenter
probe_irq_off() returns the first irq found or if two irqs are found then it returns the negative of the first irq found. We can cast dev->irq to an int so that the test for negative values works. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-18net: dccp: fix sign bugKulikov Vasiliy
'gap' is unsigned, so this code is wrong: gap = -new_head; ... if (gap > 0) { ... } Make 'gap' signed. The semantic patch that finds this problem (many false-positive results): (http://coccinelle.lip6.fr/) // <smpl> @ r1 @ identifier f; @@ int f(...) { ... } @@ identifier r1.f; type T; unsigned T x; @@ *x = f(...) ... *x > 0 Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-18IPv6: fix CoA check in RH2 input handler (mip6_rthdr_input())Arnaud Ebalard
The input handler for Type 2 Routing Header (mip6_rthdr_input()) checks if the CoA in the packet matches the CoA in the XFRM state. Current check is buggy: it compares the adddress in the Type 2 Routing Header, i.e. the HoA, against the expected CoA in the state. The comparison should be made against the address in the destination field of the IPv6 header. The bug remained unnoticed because the main (and possibly only current) user of the code (UMIP MIPv6 Daemon) initializes the XFRM state with the unspecified address, i.e. explicitly allows everything. Yoshifuji-san, can you ack that one? Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-18qlcnic: fix pci resource leakAmit Kumar Salecha
pci_get_domain_bus_and_slot: caller must decrement the reference count by calling pci_dev_put(). Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-18net-next: vmxnet3 fixes [3/5] Initialize link state at probe timeShreyas Bhatewara
This change initializes the state of link at the time when driver is loaded. The ethtool output for 'link detected' and 'link speed' is thus valid even before the interface is brought up. Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-18bnx2: use device model DMA APIStanislaw Gruszka
Use DMA API as PCI equivalents will be deprecated. This change also allow to allocate with GFP_KERNEL in some places. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-18bnx2: allocate with GFP_KERNEL flag on RX path initStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-17iwlwifi: "recover_from_tx_stall" function for 4965Wey-Yi Guy
"Recover from tx stall" function is available for all devices except 4965, here add the functionality to 4965. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-17iwlwifi: more statistics counter for agn in debugfsWey-Yi Guy
Display "wait_for_silence_timeout_cnt" for _agn devices in debugfs as part of uCode statistics Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-17iwlwifi: additional statistic debug counterWey-Yi Guy
Add wait_for_silence_timeout_cnt to statistics_dbg structure Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-16ibmveth: lost IRQ while closing/opening device leads to service lossRobert Jennings
The order of freeing the IRQ and freeing the device in firmware in ibmveth_close can cause the adapter to become unusable after a subsequent ibmveth_open. Only a reboot of the OS will make the network device usable again. This is seen when cycling the adapter up and down while there is network activity. There is a window where an IRQ will be left unserviced (H_EOI will not be called). The solution is to make a VIO_IRQ_DISABLE h_call, free the device with firmware, and then call free_irq. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-16Merge branch 'vhost-net' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2010-07-16mac80211: improve error checking if WEP fails to initJohn W. Linville
Do this by poisoning the values of wep_tx_tfm and wep_rx_tfm if either crypto allocation fails. Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-16orinoco_usb: potential null dereferenceDan Carpenter
Smatch complains that "upriv->read_urb" gets dereferenced before checking for NULL. It turns out that it's possible for "upriv->read_urb" to be NULL so I added checks around the dereferences. Also I remove an "if (upriv->bap_buf != NULL)" check because "kfree(NULL) is OK. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-16ath9k_hw: Fix AR9003 MPDU delimeter CRC check for middle subframesLuis R. Rodriguez
An A-MPDU may contain several subframes each containing its own CRC for the data. Each subframe also has a respective CRC for the MPDU length and 4 reserved bits (aka delimeter CRC). AR9003 will ACK frames that have a valid data CRC but have failed to pass the CRC for the MPDU length, if and only if the subframe is not the last subframe in an A-MPDU and if an OFDM phy OFDM reset error has been caught. Discarding those subframes results in packet loss under heavy stress conditions, an example being UDP video. Since the frames are ACK'd by hardware we need to let these frames through and process them as valid frames. Cc: Tushit Jain <tushit.jain@atheros.com> Cc: Kyungwan Nam <kyungwan.nam@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-16mac80211: skip HT parsing if HW does not support HTChristian Lamparter
This patch will also fix the odd freeze which occurred when minstrel_ht connects to an 802.11n network with legacy hardware. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-16ath9k_htc: make ath9k_htc_tx_aggr_oper() staticLuis R. Rodriguez
This fixes this sparse complaint: CHECK drivers/net/wireless/ath/ath9k/htc_drv_main.c drivers/net/wireless/ath/ath9k/htc_drv_main.c:441:5: warning: symbol 'ath9k_htc_tx_aggr_oper' was not declared. Should it be static? Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-16rt2x00: Fix lockdep warning in rt2x00lib_probe_dev()Stephen Boyd
The rt2x00dev->intf_work workqueue is never initialized when a driver is probed for a non-existent device (in this case rt2500usb). On such a path we call rt2x00lib_remove_dev() to free any resources initialized during the probe before we use INIT_WORK to initialize the workqueue. This causes lockdep to get confused since the lock used in the workqueue hasn't been initialized yet but is now being acquired during cancel_work_sync() called by rt2x00lib_remove_dev(). Fix this by initializing the workqueue first before we attempt to probe the device. This should make lockdep happy and avoid breaking any assumptions about how the library cleans up after a probe fails. phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 2027, comm: modprobe Not tainted 2.6.35-rc5+ #60 Call Trace: [<ffffffff8105fe59>] register_lock_class+0x152/0x31f [<ffffffff81344a00>] ? usb_control_msg+0xd5/0x111 [<ffffffff81061bde>] __lock_acquire+0xce/0xcf4 [<ffffffff8105f6fd>] ? trace_hardirqs_off+0xd/0xf [<ffffffff81492aef>] ? _raw_spin_unlock_irqrestore+0x33/0x41 [<ffffffff810628d5>] lock_acquire+0xd1/0xf7 [<ffffffff8104f037>] ? __cancel_work_timer+0x99/0x17e [<ffffffff8104f06e>] __cancel_work_timer+0xd0/0x17e [<ffffffff8104f037>] ? __cancel_work_timer+0x99/0x17e [<ffffffff8104f136>] cancel_work_sync+0xb/0xd [<ffffffffa0096675>] rt2x00lib_remove_dev+0x25/0xb0 [rt2x00lib] [<ffffffffa0096bf7>] rt2x00lib_probe_dev+0x380/0x3ed [rt2x00lib] [<ffffffff811d78a7>] ? __raw_spin_lock_init+0x31/0x52 [<ffffffffa00bbd2c>] ? T.676+0xe/0x10 [rt2x00usb] [<ffffffffa00bbe4f>] rt2x00usb_probe+0x121/0x15e [rt2x00usb] [<ffffffff813468bd>] usb_probe_interface+0x151/0x19e [<ffffffff812ea08e>] driver_probe_device+0xa7/0x136 [<ffffffff812ea167>] __driver_attach+0x4a/0x66 [<ffffffff812ea11d>] ? __driver_attach+0x0/0x66 [<ffffffff812e96ca>] bus_for_each_dev+0x54/0x89 [<ffffffff812e9efd>] driver_attach+0x19/0x1b [<ffffffff812e9b64>] bus_add_driver+0xb4/0x204 [<ffffffff812ea41b>] driver_register+0x98/0x109 [<ffffffff813465dd>] usb_register_driver+0xb2/0x173 [<ffffffffa00ca000>] ? rt2500usb_init+0x0/0x20 [rt2500usb] [<ffffffffa00ca01e>] rt2500usb_init+0x1e/0x20 [rt2500usb] [<ffffffff81000203>] do_one_initcall+0x6d/0x17a [<ffffffff8106cae8>] sys_init_module+0x9c/0x1e0 [<ffffffff8100296b>] system_call_fastpath+0x16/0x1b Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-16netfilter: correct CHECKSUM header and export itMichael S. Tsirkin
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-07-16vhost: avoid pr_err on condition guest can triggerMichael S. Tsirkin
Guest can trigger packet truncation by posting a very short buffer and disabling buffer merging. Convert pr_err to pr_debug to avoid log from filling up when this happens. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-15cxgb4vf: fix SGE resource resource deallocation bugCasey Leedom
Fix SGE resource resource deallocation bug. Forgot to increment the RXQ and TXQ cursors in the loop ... Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-15ipmr: Don't leak memory if fib lookup fails.Ben Greear
This was detected using two mcast router tables. The pimreg for the second interface did not have a specific mrule, so packets received by it were handled by the default table, which had nothing configured. This caused the ipmr_fib_lookup to fail, causing the memory leak. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-15 14:28:38 +0000