summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-12-21compiler.h: Fix annotation macro misplacement with ClangJosh Poimboeuf
When building with Clang and CONFIG_TRACE_BRANCH_PROFILING, there are a lot of unreachable warnings, like: arch/x86/kernel/traps.o: warning: objtool: handle_xfd_event()+0x134: unreachable instruction Without an input to the inline asm, 'volatile' is ignored for some reason and Clang feels free to move the reachable() annotation away from its intended location. Fix that by re-adding the counter value to the inputs. Fixes: f1069a8756b9 ("compiler.h: Avoid using inline asm operand modifiers") Fixes: c199f64ff93c ("instrumentation.h: Avoid using inline asm operand modifiers") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/0417e96909b97a406323409210de7bf13df0b170.1636410380.git.jpoimboe@redhat.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: x86@kernel.org Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Miroslav Benes <mbenes@suse.cz>
2021-12-21uapi: Fix undefined __always_inline on non-glibc systemsIsmael Luceno
This macro is defined by glibc itself, which makes the issue go unnoticed on those systems. On non-glibc systems it causes build failures on several utilities and libraries, like bpftool and objtool. Fixes: 1d509f2a6ebc ("x86/insn: Support big endian cross-compiles") Fixes: 2d7ce0e8a704 ("tools/virtio: more stubs") Fixes: 3fb321fde22d ("selftests/net: ipv6 flowlabel") Fixes: 50b3ed57dee9 ("selftests/bpf: test bpf flow dissection") Fixes: 9cacf81f8161 ("bpf: Remove extra lock_sock for TCP_ZEROCOPY_RECEIVE") Fixes: a4b2061242ec ("tools include uapi: Grab a copy of linux/in.h") Fixes: b12d6ec09730 ("bpf: btf: add btf print functionality") Fixes: c0dd967818a2 ("tools, include: Grab a copy of linux/erspan.h") Fixes: c4b6014e8bb0 ("tools: Add copy of perf_event.h to tools/include/linux/") Signed-off-by: Ismael Luceno <ismael@iodev.co.uk> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20211115134647.1921-1-ismael@iodev.co.uk Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com>
2021-12-21Bluetooth: btusb: Add two more Bluetooth parts for WCN6855Zijun Hu
Add USB IDs (0x10ab, 0x9309) and (0x10ab, 0x9409) to usb_device_id table for WCN6855. * /sys/kernel/debug/usb/devices T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=10ab ProdID=9309 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=10ab ProdID=9409 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-12-21Bluetooth: L2CAP: Fix using wrong modeLuiz Augusto von Dentz
If user has a set to use SOCK_STREAM the socket would default to L2CAP_MODE_ERTM which later needs to be adjusted if the destination address is LE which doesn't support such mode. Fixes: 15f02b9105625 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-21Bluetooth: hci_sync: Fix not always pausing advertising when necessaryLuiz Augusto von Dentz
hci_pause_advertising_sync shall always pause advertising until hci_resume_advertising_sync but instance 0x00 doesn't count in adv_instance_cnt so it was causing it to be skipped. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-21Bluetooth: mgmt: Make use of mgmt_send_event_skb in MGMT_EV_DEVICE_CONNECTEDLuiz Augusto von Dentz
This makes use of mgmt_alloc_skb to build MGMT_EV_DEVICE_CONNECTED so the data is copied directly to skb that is then sent using mgmt_send_event_skb eliminating the necessity of intermediary buffers. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-21Bluetooth: mgmt: Make use of mgmt_send_event_skb in MGMT_EV_DEVICE_FOUNDLuiz Augusto von Dentz
This makes use of mgmt_alloc_skb to build MGMT_EV_DEVICE_FOUND so the data is copied directly to skb that is then sent using mgmt_send_event_skb eliminating the necessity of intermediary buffers. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-21Merge tag 'pm-5.16-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix a recent regression causing the loop in dpm_prepare() to become infinite if one of the device ->prepare() callbacks returns an error" * tag 'pm-5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: sleep: Fix error handling in dpm_prepare()
2021-12-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: - Fix for compilation of selftests on non-x86 architectures - Fix for kvm_run->if_flag on SEV-ES - Fix for page table use-after-free if yielding during exit_mm() - Improve behavior when userspace starts a nested guest with invalid state - Fix missed wakeup with assigned devices but no VT-d posted interrupts - Do not tell userspace to save/restore an unsupported PMU MSR * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: Wake vCPU when delivering posted IRQ even if vCPU == this vCPU KVM: selftests: Add test to verify TRIPLE_FAULT on invalid L2 guest state KVM: VMX: Fix stale docs for kvm-intel.emulate_invalid_guest_state KVM: nVMX: Synthesize TRIPLE_FAULT for L2 if emulation is required KVM: VMX: Always clear vmx->fail on emulation_required selftests: KVM: Fix non-x86 compiling KVM: x86: Always set kvm_run->if_flag KVM: x86/mmu: Don't advance iterator after restart due to yielding KVM: x86: remove PMU FIXED_CTR3 from msrs_to_save_all
2021-12-21parisc: Fix mask used to select futex spinlockJohn David Anglin
The address bits used to select the futex spinlock need to match those used in the LWS code in syscall.S. The mask 0x3f8 only selects 7 bits. It should select 8 bits. This change fixes the glibc nptl/tst-cond24 and nptl/tst-cond25 tests. Signed-off-by: John David Anglin <dave.anglin@bell.net> Fixes: 53a42b6324b8 ("parisc: Switch to more fine grained lws locks") Cc: stable@vger.kernel.org # 5.10+ Signed-off-by: Helge Deller <deller@gmx.de>
2021-12-21parisc: Correct completer in lws startJohn David Anglin
The completer in the "or,ev %r1,%r30,%r30" instruction is reversed, so we are not clipping the LWS number when we are called from a 32-bit process (W=0). We need to nulify the following depdi instruction when the least-significant bit of %r30 is 1. If the %r20 register is not clipped, a user process could perform a LWS call that would branch to an undefined location in the kernel and potentially crash the machine. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.19+ Signed-off-by: Helge Deller <deller@gmx.de>
2021-12-21Merge tag 'nfsd-5.16-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fix from Chuck Lever: "Address a buffer overrun reported by Anatoly Trosinenko" * tag 'nfsd-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: NFSD: Fix READDIR buffer overflow
2021-12-21drm/i915/guc: Request RP0 before loading firmwareVinay Belgaumkar
By default, GT (and GuC) run at RPn. Requesting for RP0 before firmware load can speed up DMA and HuC auth as well. In addition to writing to 0xA008, we also need to enable swreq in 0xA024 so that Punit will pay heed to our request. SLPC will restore the frequency back to RPn after initialization, but we need to manually do that for the non-SLPC path. We don't need a manual override in the SLPC disabled case, just use the intel_rps_set function to ensure consistent RPS state. Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211216233022.21351-1-vinay.belgaumkar@intel.com
2021-12-21platform/x86: apple-gmux: use resource_size() with resWang Qing
This should be (res->end - res->start + 1) here actually, use resource_size() derectly. Signed-off-by: Wang Qing <wangqing@vivo.com> Link: https://lore.kernel.org/r/1639484316-75873-1-git-send-email-wangqing@vivo.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-12-21platform/x86: amd-pmc: only use callbacks for suspendMario Limonciello
This driver is intended to be used exclusively for suspend to idle so callbacks to send OS_HINT during hibernate and S5 will set OS_HINT at the wrong time leading to an undefined behavior. Cc: stable@vger.kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20211210143529.10594-1-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-12-21platform/mellanox: mlxbf-pmc: Fix an IS_ERR() vs NULL bug in ↵Miaoqian Lin
mlxbf_pmc_map_counters The devm_ioremap() function returns NULL on error, it doesn't return error pointers. Also according to doc of device_property_read_u64_array, values in info array are properties of device or NULL. Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20211210070753.10761-1-linmq006@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-12-21rtw88: support SAR via kernel common APIZong-Zhe Yang
Register cfg80211_sar_capa with type NL80211_SAR_TYPE_POWER and four frequency ranges for configurations in unit of 0.25 dBm. And handle callback set_sar_specs. Originally, TX power has three main parameters, i.e. power base, power by rate, and power limit. The formula can be simply considered as TX power = power base + min(power by rate, power limit). With the support of SAR which can be treated as another power limit, there is one more parameter for TX power. And the formula will evolve into TX power = power base + min(power by rate, power limit, power sar). Besides, debugfs tx_pwr_tbl is also refined to show SAR information. The following is an example for the difference. Before supporting SAR, ----------------------------------- ... path rate pwr base (byr lmt ) rem A CCK_1M 66(0x42) 78 -12 ( 12 -12) 0 A CCK_2M 66(0x42) 78 -12 ( 8 -12) 0 ... ----------------------------------- After supporting SAR and making some configurations, ----------------------------------- ... path rate pwr base (byr lmt sar ) rem A CCK_1M 62(0x3e) 78 -16 ( 12 -12 -16) 0 A CCK_2M 62(0x3e) 78 -16 ( 8 -12 -16) 0 ... ----------------------------------- Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211220093656.65312-1-pkshih@realtek.com
2021-12-21rtw88: 8822c: add ieee80211_ops::hw_scanPo-Hao Huang
Declare this function allows us to use customized scanning policy. By doing so we can be more time efficient on each scan. In order to make existing coex mechanism work as usual, firmware notifies driver on each channel switch event, then decide antenna ownership based on the current channel/band. Do note that this new mechanism affects throughput more than the sw_scan we used to have, but the overall average throughput is not affected since each scan take less time. Since the firmware size is limited, we only support probe requests with custom IEs length under 128 bytes for now, if any user space tools requires more than that, we'll introduce related changes afterwards. For backward compatibility, we fallback to sw_scan when using older firmware that does not support this feature. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211221085010.39421-1-pkshih@realtek.com
2021-12-21Merge tag 'iwlwifi-next-for-kalle-2021-12-21-v2' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next wlwifi patches for v5.17 v2 * Support for Time-Aware-SAR (TAS) as read from the BIOS; * Fix scan timeout issue when 6GHz is enabled; * Work continues for new HW family Bz; * Support for Optimized Connectivity Experience (OCE) scan; * A bunch of FW debugging improvements and fixes; * Fix one 32-bit compilation issue; * Some RX changes for new HW family * Some fixes for 6 GHz scan; * Fix SAR table fixes with newer platforms; * Fix early restart crash; * Small fix in the debugging code; * Add new Killer device IDs; * Datapath updates for Bz family continues; * A couple of important fixes in iwlmei; * Some other small fixes, clean-ups and improvements.
2021-12-21KVM: VMX: Wake vCPU when delivering posted IRQ even if vCPU == this vCPUSean Christopherson
Drop a check that guards triggering a posted interrupt on the currently running vCPU, and more importantly guards waking the target vCPU if triggering a posted interrupt fails because the vCPU isn't IN_GUEST_MODE. If a vIRQ is delivered from asynchronous context, the target vCPU can be the currently running vCPU and can also be blocking, in which case skipping kvm_vcpu_wake_up() is effectively dropping what is supposed to be a wake event for the vCPU. The "do nothing" logic when "vcpu == running_vcpu" mostly works only because the majority of calls to ->deliver_posted_interrupt(), especially when using posted interrupts, come from synchronous KVM context. But if a device is exposed to the guest using vfio-pci passthrough, the VFIO IRQ and vCPU are bound to the same pCPU, and the IRQ is _not_ configured to use posted interrupts, wake events from the device will be delivered to KVM from IRQ context, e.g. vfio_msihandler() | |-> eventfd_signal() | |-> ... | |-> irqfd_wakeup() | |->kvm_arch_set_irq_inatomic() | |-> kvm_irq_delivery_to_apic_fast() | |-> kvm_apic_set_irq() This also aligns the non-nested and nested usage of triggering posted interrupts, and will allow for additional cleanups. Fixes: 379a3c8ee444 ("KVM: VMX: Optimize posted-interrupt delivery for timer fastpath") Cc: stable@vger.kernel.org Reported-by: Longpeng (Mike) <longpeng2@huawei.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20211208015236.1616697-18-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - NULL pointer dereference fix in Vivaldi driver (Jiasheng Jiang) - regression fix for device probing in Holtek driver (Benjamin Tissoires) * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: potential dereference of null pointer HID: holtek: fix mouse probing
2021-12-21fm10k: Fix syntax errors in commentsXiang wangx
Delete the redundant word 'by'. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21igbvf: Refactor traceKaren Sornek
Refactoring "PF still resetting" message, because previous version looked like a bug - it informed about changes that worked as designed but might confuse users. Changes requested to make message more user-friendly. Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21igb: remove never changed variable `ret_val'Jason Wang
The variable used for return status in `igb_write_xmdio_reg' function is never changed and this function is just need return 0. Thus, the `ret_val' can be removed and return 0 at the end of the `igb_write_xmdio_reg' function. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21igc: Remove obsolete defineSasha Neftin
'MII_CR_FULL_DUPLEX' define not in use. This patch comes to tidy up obsolete define. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21igc: Remove obsolete maskSasha Neftin
'IGC_CTRL_EXT_LINK_MODE_MASK' not in use. This patch comes to tidy up obsolete define. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21igc: Remove obsolete nvm typeSasha Neftin
i225 devices use only spi nvm type. This patch comes to tidy up obsolete nvm types. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21igc: Remove unused phy typeSasha Neftin
_phy_none type not in use. Clean up the code accordingly, and get rid of the unused enum line Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21igc: Remove unused _I_PHY_ID defineSasha Neftin
_I_PHY_ID not in use. Clean up the code accordingly, and get rid of the unused define Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: support crosstimestamping on E822 devices if supportedJacob Keller
E822 devices on supported platforms can generate a cross timestamp between the platform ART and the device time. This process allows for very precise measurement of the difference between the PTP hardware clock and the platform time. This is only supported if we know the TSC frequency relative to ART, so we do not enable this unless the boot CPU has a known TSC frequency (as required by convert_art_ns_to_tsc). Because PCIe PTM support is not available on all platforms, introduce CONFIG_ICE_HWTS and make it depend on X86 where we know the support exists. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: exit bypass mode once hardware finishes timestamp calibrationJacob Keller
Once the E822 device has sent and received one packet, the hardware computes the internal delay of the PHY using a process known as Vernier calibration. This calibration calculates a more accurate offset for the Tx and Rx timestamps. To make use of this offset, we need to exit the bypass mode. This cannot be done until the PHY has completed offset calibration, as indicated by the offset valid bits. To handle this, introduce a kthread work item which will poll the offset valid bits every few milliseconds seeing if it is safe to exit bypass mode. Once we have finished calibrating the offsets, we can program the total Tx and Rx offset registers and turn off the bypass bit. This allows the hardware to include the more precise vernier calibration offset, and improves the timestamp precision. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: ensure the hardware Clock Generation Unit is configuredJacob Keller
The E822 device has a Clock Generation Unit (CGU) responsible for determining the clock frequency that drives the timers. Ensure this function is initialized when bringing up the PTP support, so that the clock has a known frequency. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: implement basic E822 PTP supportJacob Keller
Implement support for the basic operations needed to enable the PTP hardware clock on E822 devices. This includes implementations for the various PHY access functions, as well as the ability to start and stop the PHY timers. This is different from the E810 device because the configuration depends on link speed, so we cannot just start the PHYs immediately. We must wait until the link is up to get proper values for the speed based initialization. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: convert clk_freq capability into time_refJacob Keller
Convert the clk_freq value into the associated time_ref frequency value for E822 devices. This simplifies determining the time reference value for the clock. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: introduce ice_ptp_init_phc functionJacob Keller
When we enable support for E822 devices, there are some additional steps required to initialize the PTP hardware clock. To make this easier to implement as device-specific behavior, refactor the register setups in ice_ptp_init_owner to a new ice_ptp_init_phc function defined in ice_ptp_hw.c This function will have a common section, and an e810 specific sub-implementation. This will enable easily extending the functionality to cover the E822 specific setup required to initialize the hardware clock generation unit. It also makes it clear which steps are E810 specific vs which ones are necessary for all ice devices. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: use 'int err' instead of 'int status' in ice_ptp_hw.cJacob Keller
The ice_ptp_hw.c file introduced a bunch of uses of "int status" instead of the more traditional "int err" or "int ret". These are actually traditional Linux error codes (as opposed to the recently removed ice_status enumeration values). We're about to add a bunch of new functions to ice_ptp_hw.c. It's normally preferred in the ice driver to use "int ret" or "int err" when dealing with error code values. Instead of making the new functions use "int status" lets just fix all of ice_ptp_hw.c to use "int err". This will match the new functions and ensures a consistent style across at least the PTP related files. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: PTP: move setting of tstamp_configJacob Keller
The tstamp_config structure is being set inside of ice_ptp_cfg_timestamp, which is the function used to set Tx and Rx timestamping during initialization. This function is also used in order to set the PHY port timestamping status. However, it makes sense to always set the tstamp_config directly whenever the ice_set_tx_tstamp or ice_set_rx_tstamp functions are called. Move assignment of tstamp_config into the related functions and out of ice_ptp_cfg_timestamp. Now that we assign the timestamp mode in the relevant functions, we no longer modify the config value in ice_set_timestamp_mode. In turn, we no longer want to copy that config value into the PF cached structure. Instead, this is now the source of truth for actual configuration. On success of ice_set_timestamp_mode, copy the real configured mode back to report it out to userspace. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: introduce ice_base_incval functionJacob Keller
A future change will add additional possible increment values for the E822 device support. To handle this, we want to look up the increment value to use instead of hard coding it to the nominal value for E810 devices. Introduce ice_base_incval as a function to get the best nominal increment value to use. For now, it just returns the E810 value, but will be refactored in the future to look up the value based on the device type and configured clock frequency. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: Fix E810 PTP reset flowKarol Kolacinski
The PF reset does not reset PHC and PHY clocks so it's unnecessary to stop them and reinitialize after the reset. Configuring timestamping changes the VSI fields so it needs to be performed after VSIs are initialized, which was not done in case of a reset. Suggested-by: Patrick Talbert <ptalbert@redhat.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pasi Vaananen <pvaanane@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21Merge tag 'mac80211-next-for-net-next-2021-12-21' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time we have: * ndo_fill_forward_path support in mac80211, to let drivers use it * association comeback notification for userspace, to be able to react more sensibly to long delays * support for background radar detection hardware in some chipsets * SA Query Procedures offload on the AP side * more logging if we find problems with HT/VHT/HE * various cleanups and minor fixes Conflicts: net/wireless/reg.c: e08ebd6d7b90 ("cfg80211: Acquire wiphy mutex on regulatory work") 701fdfe348f7 ("cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface") https://lore.kernel.org/r/20211221111950.57ecc6a7@canb.auug.org.au drivers/net/wireless/ath/ath10k/wmi.c: 7f599aeccbd2 ("cfg80211: Use the HE operation IE to determine a 6GHz BSS channel") 3bf2537ec2e3 ("ath10k: drop beacon and probe response which leak from other channel") https://lore.kernel.org/r/20211221115004.1cd6b262@canb.auug.org.au * tag 'mac80211-next-for-net-next-2021-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (32 commits) cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface rfkill: allow to get the software rfkill state cfg80211: refactor cfg80211_get_ies_channel_number() nl82011: clarify interface combinations wrt. channels nl80211: Add support to offload SA Query procedures for AP SME device nl80211: Add support to set AP settings flags with single attribute mac80211: add more HT/VHT/HE state logging cfg80211: Use the HE operation IE to determine a 6GHz BSS channel cfg80211: rename offchannel_chain structs to background_chain to avoid confusion with ETSI standard mac80211: Notify cfg80211 about association comeback cfg80211: Add support for notifying association comeback mac80211: introduce channel switch disconnect function cfg80211: Fix order of enum nl80211_band_iftype_attr documentation cfg80211: simplify cfg80211_chandef_valid() mac80211: Remove a couple of obsolete TODO mac80211: fix FEC flag in radio tap header mac80211: use coarse boottime for airtime fairness code ieee80211: change HE nominal packet padding value defines cfg80211: use ieee80211_bss_get_elem() instead of _get_ie() mac80211: Use memset_after() to clear tx status ... ==================== Link: https://lore.kernel.org/r/20211221112532.28708-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-21usb: typec: ucsi: Only check the contract if there is a connectionHeikki Krogerus
The driver must make sure there is an actual connection before checking details about the USB Power Delivery contract. Those details are not valid unless there is a connection. This fixes NULL pointer dereference that is caused by an attempt to register bogus partner alternate mode that the firmware on some platform may report before the actual connection. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215117 Fixes: 6cbe4b2d5a3f ("usb: typec: ucsi: Check the partner alt modes always if there is PD contract") Reported-by: Chris Hixon <linux-kernel-bugs@hixontech.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/eb34f98f-00ef-3238-2daa-80481116035d@leemhuis.info/ Link: https://lore.kernel.org/r/20211221140352.45501-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-21gpio: virtio: remove timeoutVincent Whitchurch
The driver imposes an arbitrary one second timeout on virtio requests, but the specification doesn't prevent the virtio device from taking longer to process requests, so remove this timeout to support all systems and device implementations. Fixes: 3a29355a22c0275fe86 ("gpio: Add virtio-gpio driver") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-12-21Merge tag 'qcom-dts-for-5.17' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm DeviceTree updates for v5.17 To SDX55 this introduces the description of the IPA, PCIe PHY and PCIe endpoint controller, as well as enables these for the FN960 device. The SDX65 5G platform is introduced, currently with definitions necessary to boot to a shell. The undocumented property "input-name" is dropped throughout the dts files, dwc3 nodes throughout gains more specific compatibles and lastly building of the Dragonboard 410c DTB on ARM32 is enabled, in addition to its normal operation in 64-bit mode. * tag 'qcom-dts-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: Drop input-name property ARM: dts: qcom: sdx65: Add pincontrol node ARM: dts: qcom: Add SDX65 platform and MTP board support dt-bindings: arm: qcom: Document SDX65 platform and boards dt-bindings: clock: Add SDX65 GCC clock bindings ARM: dts: qcom: Build apq8016-sbc/DragonBoard 410c DTB on ARM32 ARM: dts: qcom: sdx55-t55: Enable IPA ARM: dts: qcom: sdx55-fn980: Enable IPA ARM: dts: qcom: sdx55-fn980: Enable PCIe EP ARM: dts: qcom: sdx55: Add support for PCIe EP ARM: dts: qcom: sdx55-fn980: Enable PCIE0 PHY ARM: dts: qcom: sdx55: Add support for PCIe PHY ARM: dts: qcom: update USB nodes with new platform specific compatible Link: https://lore.kernel.org/r/20211221042154.3621955-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-21ipmi: Fix UAF when uninstall ipmi_si and ipmi_msghandler moduleWu Bo
Hi, When testing install and uninstall of ipmi_si.ko and ipmi_msghandler.ko, the system crashed. The log as follows: [ 141.087026] BUG: unable to handle kernel paging request at ffffffffc09b3a5a [ 141.087241] PGD 8fe4c0d067 P4D 8fe4c0d067 PUD 8fe4c0f067 PMD 103ad89067 PTE 0 [ 141.087464] Oops: 0010 [#1] SMP NOPTI [ 141.087580] CPU: 67 PID: 668 Comm: kworker/67:1 Kdump: loaded Not tainted 4.18.0.x86_64 #47 [ 141.088009] Workqueue: events 0xffffffffc09b3a40 [ 141.088009] RIP: 0010:0xffffffffc09b3a5a [ 141.088009] Code: Bad RIP value. [ 141.088009] RSP: 0018:ffffb9094e2c3e88 EFLAGS: 00010246 [ 141.088009] RAX: 0000000000000000 RBX: ffff9abfdb1f04a0 RCX: 0000000000000000 [ 141.088009] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 141.088009] RBP: 0000000000000000 R08: ffff9abfffee3cb8 R09: 00000000000002e1 [ 141.088009] R10: ffffb9094cb73d90 R11: 00000000000f4240 R12: ffff9abfffee8700 [ 141.088009] R13: 0000000000000000 R14: ffff9abfdb1f04a0 R15: ffff9abfdb1f04a8 [ 141.088009] FS: 0000000000000000(0000) GS:ffff9abfffec0000(0000) knlGS:0000000000000000 [ 141.088009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 141.088009] CR2: ffffffffc09b3a30 CR3: 0000008fe4c0a001 CR4: 00000000007606e0 [ 141.088009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 141.088009] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 141.088009] PKRU: 55555554 [ 141.088009] Call Trace: [ 141.088009] ? process_one_work+0x195/0x390 [ 141.088009] ? worker_thread+0x30/0x390 [ 141.088009] ? process_one_work+0x390/0x390 [ 141.088009] ? kthread+0x10d/0x130 [ 141.088009] ? kthread_flush_work_fn+0x10/0x10 [ 141.088009] ? ret_from_fork+0x35/0x40] BUG: unable to handle kernel paging request at ffffffffc0b28a5a [ 200.223240] PGD 97fe00d067 P4D 97fe00d067 PUD 97fe00f067 PMD a580cbf067 PTE 0 [ 200.223464] Oops: 0010 [#1] SMP NOPTI [ 200.223579] CPU: 63 PID: 664 Comm: kworker/63:1 Kdump: loaded Not tainted 4.18.0.x86_64 #46 [ 200.224008] Workqueue: events 0xffffffffc0b28a40 [ 200.224008] RIP: 0010:0xffffffffc0b28a5a [ 200.224008] Code: Bad RIP value. [ 200.224008] RSP: 0018:ffffbf3c8e2a3e88 EFLAGS: 00010246 [ 200.224008] RAX: 0000000000000000 RBX: ffffa0799ad6bca0 RCX: 0000000000000000 [ 200.224008] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 200.224008] RBP: 0000000000000000 R08: ffff9fe43fde3cb8 R09: 00000000000000d5 [ 200.224008] R10: ffffbf3c8cb53d90 R11: 00000000000f4240 R12: ffff9fe43fde8700 [ 200.224008] R13: 0000000000000000 R14: ffffa0799ad6bca0 R15: ffffa0799ad6bca8 [ 200.224008] FS: 0000000000000000(0000) GS:ffff9fe43fdc0000(0000) knlGS:0000000000000000 [ 200.224008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.224008] CR2: ffffffffc0b28a30 CR3: 00000097fe00a002 CR4: 00000000007606e0 [ 200.224008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 200.224008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 200.224008] PKRU: 55555554 [ 200.224008] Call Trace: [ 200.224008] ? process_one_work+0x195/0x390 [ 200.224008] ? worker_thread+0x30/0x390 [ 200.224008] ? process_one_work+0x390/0x390 [ 200.224008] ? kthread+0x10d/0x130 [ 200.224008] ? kthread_flush_work_fn+0x10/0x10 [ 200.224008] ? ret_from_fork+0x35/0x40 [ 200.224008] kernel fault(0x1) notification starting on CPU 63 [ 200.224008] kernel fault(0x1) notification finished on CPU 63 [ 200.224008] CR2: ffffffffc0b28a5a [ 200.224008] ---[ end trace c82a412d93f57412 ]--- The reason is as follows: T1: rmmod ipmi_si. ->ipmi_unregister_smi() -> ipmi_bmc_unregister() -> __ipmi_bmc_unregister() -> kref_put(&bmc->usecount, cleanup_bmc_device); -> schedule_work(&bmc->remove_work); T2: rmmod ipmi_msghandler. ipmi_msghander module uninstalled, and the module space will be freed. T3: bmc->remove_work doing cleanup the bmc resource. -> cleanup_bmc_work() -> platform_device_unregister(&bmc->pdev); -> platform_device_del(pdev); -> device_del(&pdev->dev); -> kobject_uevent(&dev->kobj, KOBJ_REMOVE); -> kobject_uevent_env() -> dev_uevent() -> if (dev->type && dev->type->name) 'dev->type'(bmc_device_type) pointer space has freed when uninstall ipmi_msghander module, 'dev->type->name' cause the system crash. drivers/char/ipmi/ipmi_msghandler.c: 2820 static const struct device_type bmc_device_type = { 2821 .groups = bmc_dev_attr_groups, 2822 }; Steps to reproduce: Add a time delay in cleanup_bmc_work() function, and uninstall ipmi_si and ipmi_msghandler module. 2910 static void cleanup_bmc_work(struct work_struct *work) 2911 { 2912 struct bmc_device *bmc = container_of(work, struct bmc_device, 2913 remove_work); 2914 int id = bmc->pdev.id; /* Unregister overwrites id */ 2915 2916 msleep(3000); <--- 2917 platform_device_unregister(&bmc->pdev); 2918 ida_simple_remove(&ipmi_bmc_ida, id); 2919 } Use 'remove_work_wq' instead of 'system_wq' to solve this issues. Fixes: b2cfd8ab4add ("ipmi: Rework device id and guid handling to catch changing BMCs") Signed-off-by: Wu Bo <wubo40@huawei.com> Message-Id: <1640070034-56671-1-git-send-email-wubo40@huawei.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-12-21Merge tag 'qcom-drivers-for-5.17' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for v5.17 This introduces RPM power-domain support for the SM8450, SM6125 and QCM2290 platforms. It them clean up the platform-based naming of the resources definitions throughout the RPMh PD driver. The last-level cache controller driver gains SM8350 support. The RPM sleep stats driver gains support for several older systems that had a slightly different memory layout for this information. The socinfo gains SM8450, SM6350 and SM7227 definitions. In addition to the DeviceTree binding updates related to these changes new compatibles was added to describe the SM8450 and the Kryo 780 CPU. Lastly a few typo and style fixes are introduced. * tag 'qcom-drivers-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits) soc: qcom: rpmh-rsc: Fix typo in a comment soc: qcom: socinfo: Add SM6350 and SM7225 dt-bindings: arm: msm: Don't mark LLCC interrupt as required dt-bindings: firmware: scm: Add SM6350 compatible dt-bindings: arm: msm: Add LLCC for SM6350 soc: qcom: rpmhpd: Sort power-domain definitions and lists soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280 soc: qcom: rpmhpd: Rename rpmhpd struct names soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao soc: qcom: socinfo: add SM8450 ID soc: qcom: rpmhpd: Add SM8450 power domains dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding soc: qcom: smem: Update max processor count dt-bindings: arm: qcom: Document SM8450 SoC and boards dt-bindings: firmware: scm: Add SM8450 compatible dt-bindings: arm: cpus: Add kryo780 compatible soc: qcom: rpmpd: Add support for sm6125 dt-bindings: qcom-rpmpd: Add sm6125 power domains soc: qcom: aoss: constify static struct thermal_cooling_device_ops PM: AVS: qcom-cpr: Use div64_ul instead of do_div ... Link: https://lore.kernel.org/r/20211221040452.3620633-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-21drm/i915: Add ww ctx to i915_gem_object_trylockMaarten Lankhorst
This is required for i915_gem_evict_vm, to be able to evict the entire VM, including objects that are already locked to the current ww ctx. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211216142749.1966107-12-maarten.lankhorst@linux.intel.com
2021-12-21drm/i915: Require object lock when freeing pages during destructionMaarten Lankhorst
TTM already requires this, and we require it for delayed destroy. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211216142749.1966107-11-maarten.lankhorst@linux.intel.com
2021-12-21drm/i915: Trylock the object when shrinkingMaarten Lankhorst
We're working on requiring the obj->resv lock during unbind, fix the shrinker to take the object lock. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211216142749.1966107-10-maarten.lankhorst@linux.intel.com
2021-12-21mmc: mmci: stm32: clear DLYB_CR after sending tuning commandYann Gautier
During test campaign, and especially after several unbind/bind sequences, it has been seen that the SD-card on SDMMC1 thread could freeze. The freeze always appear on a CMD23 following a CMD19. Checking SDMMC internal registers shows that the tuning command (CMD19) has failed. The freeze is then due to the delay block involved in the tuning sequence. To correct this, clear the delay block register DLYB_CR register after the tuning commands. Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Fixes: 1103f807a3b9 ("mmc: mmci_sdmmc: Add execute tuning with delay block") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211215141727.4901-4-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-21arm64: exynos: Enable Exynos Multi-Core Timer driverMarek Szyprowski
Some ARM64 Exynos SoCs have MCT timer block, e.g. Exynos850 and Exynos5433. CLKSRC_EXYNOS_MCT option is not visible unless COMPILE_TEST is enabled. Select CLKSRC_EXYNOS_MCT option for ARM64 ARCH_EXYNOS like it's done in arch/arm/mach-exynos/Kconfig, to enable MCT timer support for ARM64 Exynos SoCs. Even though ARM architected timer is available on all ARM64 SoCs, and used for managing timer hardware and clock source events, MCT timer still can be used as a wakeup source, as stated in commitae460fd9164b ("clocksource/drivers/exynos_mct: Prioritise Arm arch timer on arm64"). It's also nice to be able to test available MCT IP-core. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20211101193531.15078-3-semen.protsenko@linaro.org Link: https://lore.kernel.org/r/20211220165004.17005-2-krzysztof.kozlowski@canonical.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit (git 2.34.1) at 2025-09-20 17:46:02 +0000