summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-04-19mlxsw: core_env: Fix driver initialization with old firmwareIdo Schimmel
The driver queries the Management Capabilities Mask (MCAM) register during initialization to understand if it can read up to 128 bytes from transceiver modules. However, not all firmware versions support this register, leading to the driver failing to load. Fix by treating an error in the register query as an indication that the feature is not supported. Fixes: 1f4aea1f72da ("mlxsw: core_env: Read transceiver module EEPROM in 128 bytes chunks") Reported-by: Tim 'mithro' Ansell <me@mith.ro> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/0afa8b2e8bac178f5f88211344429176dcc72281.1713446092.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-19mlxsw: core: Unregister EMAD trap using FORWARD actionIdo Schimmel
The device's manual (PRM - Programmer's Reference Manual) classifies the trap that is used to deliver EMAD responses as an "event trap". Among other things, it means that the only actions that can be associated with the trap are TRAP and FORWARD (NOP). Currently, during driver de-initialization the driver unregisters the trap by setting its action to DISCARD, which violates the above guideline. Future firmware versions will prevent such misuses by returning an error. This does not prevent the driver from working, but an error will be printed to the kernel log during module removal / devlink reload: mlxsw_spectrum 0000:03:00.0: Reg cmd access status failed (status=7(bad parameter)) mlxsw_spectrum 0000:03:00.0: Reg cmd access failed (reg_id=7003(hpkt),type=write) Suppress the error message by aligning the driver to the manual and use a FORWARD (NOP) action when unregistering the trap. Fixes: 4ec14b7634b2 ("mlxsw: Add interface to access registers and process events") Cc: Jiri Pirko <jiri@resnulli.us> Cc: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/753a89e14008fde08cb4a2c1e5f537b81d8eb2d6.1713446092.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-19net: bcmasp: fix memory leak when bringing down interfaceJustin Chen
When bringing down the TX rings we flush the rings but forget to reclaimed the flushed packets. This leads to a memory leak since we do not free the dma mapped buffers. This also leads to tx control block corruption when bringing down the interface for power management. Fixes: 490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller") Signed-off-by: Justin Chen <justin.chen@broadcom.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240418180541.2271719-1-justin.chen@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-19udp: preserve the connected status if only UDP cmsgYick Xie
If "udp_cmsg_send()" returned 0 (i.e. only UDP cmsg), "connected" should not be set to 0. Otherwise it stops the connected socket from using the cached route. Fixes: 2e8de8576343 ("udp: add gso segment cmsg") Signed-off-by: Yick Xie <yick.xie@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240418170610.867084-1-yick.xie@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-19ksmbd: add continuous availability share parameterNamjae Jeon
If capabilities of the share is not SMB2_SHARE_CAP_CONTINUOUS_AVAILABILITY, ksmbd should not grant a persistent handle to the client. This patch add continuous availability share parameter to control it. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-04-19ksmbd: common: use struct_group_attr instead of struct_group for ↵Namjae Jeon
network_open_info 4byte padding cause the connection issue with the applications of MacOS. smb2_close response size increases by 4 bytes by padding, And the smb client of MacOS check it and stop the connection. This patch use struct_group_attr instead of struct_group for network_open_info to use __packed to avoid padding. Fixes: 0015eb6e1238 ("smb: client, common: fix fortify warnings") Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-04-19ksmbd: clear RENAME_NOREPLACE before calling vfs_renameMarios Makassikis
File overwrite case is explicitly handled, so it is not necessary to pass RENAME_NOREPLACE to vfs_rename. Clearing the flag fixes rename operations when the share is a ntfs-3g mount. The latter uses an older version of fuse with no support for flags in the ->rename op. Cc: stable@vger.kernel.org Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-04-19ksmbd: validate request buffer size in smb2_allocate_rsp_buf()Namjae Jeon
The response buffer should be allocated in smb2_allocate_rsp_buf before validating request. But the fields in payload as well as smb2 header is used in smb2_allocate_rsp_buf(). This patch add simple buffer size validation to avoid potencial out-of-bounds in request buffer. Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-04-19ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_bufNamjae Jeon
If ->ProtocolId is SMB2_TRANSFORM_PROTO_NUM, smb2 request size validation could be skipped. if request size is smaller than sizeof(struct smb2_query_info_req), slab-out-of-bounds read can happen in smb2_allocate_rsp_buf(). This patch allocate response buffer after decrypting transform request. smb3_decrypt_req() will validate transform request size and avoid slab-out-of-bound in smb2_allocate_rsp_buf(). Reported-by: Norbert Szetei <norbert@doyensec.com> Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-04-19Merge tag 'perf-tools-fixes-for-v6.9-2024-04-19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Namhyung Kim: "A random set of small bug fixes: - Fix perf annotate TUI when used with data type profiling - Work around BPF verifier about sighand lock checking And a set of kernel header synchronization" * tag 'perf-tools-fixes-for-v6.9-2024-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: tools/include: Sync arm64 asm/cputype.h with the kernel sources tools/include: Sync asm-generic/bitops/fls.h with the kernel sources tools/include: Sync x86 asm/msr-index.h with the kernel sources tools/include: Sync x86 asm/irq_vectors.h with the kernel sources tools/include: Sync x86 CPU feature headers with the kernel sources tools/include: Sync uapi/sound/asound.h with the kernel sources tools/include: Sync uapi/linux/kvm.h and asm/kvm.h with the kernel sources tools/include: Sync uapi/linux/fs.h with the kernel sources tools/include: Sync uapi/drm/i915_drm.h with the kernel sources perf lock contention: Add a missing NULL check perf annotate: Make sure to call symbol__annotate2() in TUI
2024-04-19Merge tag 'hardening-v6.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening fixes from Kees Cook: - Correctly disable UBSAN configs in configs/hardening (Nathan Chancellor) - Add missing signed integer overflow trap types to arm64 handler * tag 'hardening-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: ubsan: Add awareness of signed integer overflow traps configs/hardening: Disable CONFIG_UBSAN_SIGNED_WRAP configs/hardening: Fix disabling UBSAN configurations
2024-04-19smb: client: fix rename(2) regression against sambaPaulo Alcantara
After commit 2c7d399e551c ("smb: client: reuse file lease key in compound operations") the client started reusing lease keys for rename, unlink and set path size operations to prevent it from breaking its own leases and thus causing unnecessary lease breaks to same connection. The implementation relies on positive dentries and cifsInodeInfo::lease_granted to decide whether reusing lease keys for the compound requests. cifsInodeInfo::lease_granted was introduced by commit 0ab95c2510b6 ("Defer close only when lease is enabled.") to indicate whether lease caching is granted for a specific file, but that can only happen until file is open, so cifsInodeInfo::lease_granted was left uninitialised in ->alloc_inode and then client started sending random lease keys for files that hadn't any leases. This fixes the following test case against samba: mount.cifs //srv/share /mnt/1 -o ...,nosharesock mount.cifs //srv/share /mnt/2 -o ...,nosharesock touch /mnt/1/foo; tail -f /mnt/1/foo & pid=$! mv /mnt/2/foo /mnt/2/bar # fails with -EIO kill $pid Fixes: 0ab95c2510b6 ("Defer close only when lease is enabled.") Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-04-19Merge tag 'for-linus-iommufd' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd Pull iommufd fixes from Jason Gunthorpe: "Two fixes for the selftests: - CONFIG_IOMMUFD_TEST needs CONFIG_IOMMUFD_DRIVER to work - The kconfig fragment sshould include fault injection so the fault injection test can work" * tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: iommufd: Add config needed for iommufd_fail_nth iommufd: Add missing IOMMUFD_DRIVER kconfig for the selftest
2024-04-19cifs: Add tracing for the cifs_tcon struct refcountingDavid Howells
Add tracing for the refcounting/lifecycle of the cifs_tcon struct, marking different events with different labels and giving each tcon its own debug ID so that the tracelines corresponding to individual tcons can be distinguished. This can be enabled with: echo 1 >/sys/kernel/debug/tracing/events/cifs/smb3_tcon_ref/enable Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2024-04-19Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: - Add a missing mutex_destroy() in rxe - Enhance the debugging print for cm_destroy failures to help debug these - Fix mlx5 MAD processing in cases where multiport devices are running in switchedev mode * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/mlx5: Fix port number for counter query in multi-port configuration RDMA/cm: Print the old state when cm_destroy_id gets timeout RDMA/rxe: Fix the problem "mutex_destroy missing"
2024-04-19cifs: Fix reacquisition of volume cookie on still-live connectionDavid Howells
During mount, cifs_mount_get_tcon() gets a tcon resource connection record and then attaches an fscache volume cookie to it. However, it does this irrespective of whether or not the tcon returned from cifs_get_tcon() is a new record or one that's already in use. This leads to a warning about a volume cookie collision and a leaked volume cookie because tcon->fscache gets reset. Fix this be adding a mutex and a "we've already tried this" flag and only doing it once for the lifetime of the tcon. [!] Note: Looking at cifs_mount_get_tcon(), a more general solution may actually be required. Reacquiring the volume cookie isn't the only thing that function does: it also partially reinitialises the tcon record without any locking - which may cause live filesystem ops already using the tcon through a previous mount to malfunction. This can be reproduced simply by something like: mount //example.com/test /xfstest.test -o user=shares,pass=xxx,fsc mount //example.com/test /mnt -o user=shares,pass=xxx,fsc Fixes: 70431bfd825d ("cifs: Support fscache indexing rewrite") Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> cc: Shyam Prasad N <sprasad@microsoft.com> cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2024-04-19Merge tag '9p-fixes-for-6.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs Pull fs/9p fixes from Eric Van Hensbergen: "This contains a reversion of one of the original 6.9 patches which seems to have been the cause of most of the instability. It also incorporates several fixes to legacy support and cache fixes. There are few additional changes to improve stability, but I want another week of testing before sending them upstream" * tag '9p-fixes-for-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: fs/9p: drop inodes immediately on non-.L too fs/9p: Revert "fs/9p: fix dups even in uncached mode" fs/9p: remove erroneous nlink init from legacy stat2inode 9p: explicitly deny setlease attempts fs/9p: fix the cache always being enabled on files with qid flags fs/9p: translate O_TRUNC into OTRUNC fs/9p: only translate RWX permissions for plain 9P2000
2024-04-19Merge tag 'fuse-fixes-6.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: - Fix two bugs in the new passthrough mode - Fix a statx bug introduced in v6.6 - Fix code documentation * tag 'fuse-fixes-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: cuse: add kernel-doc comments to cuse_process_init_reply() fuse: fix leaked ENOSYS error on first statx call fuse: fix parallel dio write on file open in passthrough mode fuse: fix wrong ff->iomode state changes from parallel dio write
2024-04-19Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Fix a kernel fault during page table walking in huge_pte_alloc() with PTABLE_LEVELS=5 due to using p4d_offset() instead of p4d_alloc() - head.S fix and cleanup to disable the MMU before toggling the HCR_EL2.E2H bit when entering the kernel with the MMU on from the EFI stub. Changing this bit (currently from VHE to nVHE) causes some system registers as well as page table descriptors to be interpreted differently, potentially resulting in spurious MMU faults - Fix translation fault in swsusp_save() accessing MEMBLOCK_NOMAP memory ranges due to kernel_page_present() returning true in most configurations other than rodata_full == true, CONFIG_DEBUG_PAGEALLOC=y or CONFIG_KFENCE=y * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: hibernate: Fix level3 translation fault in swsusp_save() arm64/head: Disable MMU at EL2 before clearing HCR_EL2.E2H arm64/head: Drop unnecessary pre-disable-MMU workaround arm64/hugetlb: Fix page table walk in huge_pte_alloc()
2024-04-19Merge tag 's390-6.9-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Alexander Gordeev: - Fix NULL pointer dereference in program check handler - Fake IRBs are important events relevant for problem analysis. Add traces when queueing and delivering - Fix a race condition in ccw_device_set_online() that can cause the online process to fail - Deferred condition code 1 response indicates that I/O was not started and should be retried. The current QDIO implementation handles a cc1 response as an error, resulting in a failed QDIO setup. Fix that by retrying the setup when a cc1 response is received * tag 's390-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: Fix NULL pointer dereference s390/cio: log fake IRB events s390/cio: fix race condition during online processing s390/qdio: handle deferred cc1
2024-04-19Merge tag 'bootconfig-fixes-v6.9-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull bootconfig fixes from Masami Hiramatsu: - Fix potential static_command_line buffer overrun. Currently we allocate the memory for static_command_line based on "boot_command_line", but it will copy "command_line" into it. So we use the length of "command_line" instead of "boot_command_line" (as we previously did) - Use memblock_free_late() in xbc_exit() instead of memblock_free() after the buddy system is initialized - Fix a kerneldoc warning * tag 'bootconfig-fixes-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: bootconfig: Fix the kerneldoc of _xbc_exit() bootconfig: use memblock_free_late to free xbc memory to buddy init/main.c: Fix potential static_command_line memory overflow
2024-04-19drm/i915: Enable per-lane DP drive settings for bxt/glkVille Syrjälä
Now the bxt/glk PHY code is ready for per-lane drive settings so enable it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412175818.29217-9-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-19drm/i915/dpio: Program bxt/glk PHY TX registers per-laneVille Syrjälä
Program each bxt/glk PHY TX lane with its own settings instead of blasting them all with the same stuff via group access. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412175818.29217-8-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-19drm/i915/dpio: s/ddi/dpio/ for bxt/glk PHY stuffVille Syrjälä
Since all of this lives in intel_dpio_phy.c let's rename the bxt/glk functions to have bxt_dpio_phy_ namespace. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412175818.29217-7-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-19drm/i915/dpio: Use intel_de_rmw() for BXT DPIO latency optim setupVille Syrjälä
Replace the hand rolled intel_de_rmw() with the real thing. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412175818.29217-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-19drm/i915/dpio: Introdude bxt_ddi_phy_rmw_grp()Ville Syrjälä
Add a helper to do the "read from one per-lane register and write to the group register" rmw cycle. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412175818.29217-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-19drm/i915/dpio: Extract bxt_dpio_phy_regs.hVille Syrjälä
Extract the BXT/GLK DPIO PHY register definitions into their own file. v2: Adjust gvt accordingly Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417151232.32175-1-ville.syrjala@linux.intel.com
2024-04-19drm/i915/dpio: Add per-lane PHY TX register definitons for bxt/glkVille Syrjälä
Add consistent definitions for the per-lane PHY TX registers on bxt/glk. The current situation is a slight mess with some registers having a LN0 define, while others have a parametrized per-lane definition. v2: Adjust gvt accordingly Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417151211.32135-1-ville.syrjala@linux.intel.com
2024-04-19drm/i915/dpio: Clean up bxt/glk PHY registersVille Syrjälä
Use REG_BIT() & co. for the bxt/glk PHY register definitons. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412175818.29217-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-19Merge tag 'thermal-6.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fix from Rafael Wysocki: "This prevents the thermal debug code from attempting to divide by zero and corrects trip point statistics (Rafael Wysocki)" * tag 'thermal-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/debugfs: Add missing count increment to thermal_debug_tz_trip_up()
2024-04-19Merge tag 'sound-6.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Things look calm and normal, we got handful HD-audio-related small fixes and a fix for MIDI 2.0 UMP handling" * tag 'sound-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: seq: ump: Fix conversion from MIDI2 to MIDI1 UMP messages ALSA: hda/realtek - Enable audio jacks of Haier Boyue G42 with ALC269VC ALSA: hda/realtek: Add quirks for Huawei Matebook D14 NBLB-WAX9N ALSA: hda/realtek: Fix volumn control of ThinkBook 16P Gen4 ALSA: hda/realtek: Fixes for Asus GU605M and GA403U sound ALSA: hda/tas2781: Add new vendor_id and subsystem_id to support ThinkPad ICE-1 ALSA: hda/tas2781: correct the register for pow calibrated data ALSA: hda/realtek: Add quirk for HP SnowWhite laptops
2024-04-19Merge tag 'drm-fixes-2024-04-19' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Regular week of fixes, seems to be about right for this time in the release cycle, amdgpu, and nouveau are the main one with some scattered fixes otherwise. ttm: - Stop pooling cached NUMA pages amdgpu: - Fix invalid resource->start check - USB-C DSC fix - Fix a potential UAF in VA IOCTL - Fix visible VRAM handling during faults amdkfd: - Fix memory leak in create_process failure radeon: - Silence UBSAN warnings from variable sized arrays nouveau: - dp: Don't probe DP ports twice - nv04: Fix OOB access - nv50: Disable AUX bus for disconnected DP ports - nvkm: Fix instmem race condition panel: - Don't unregister DSI devices in several drivers v3d: - Fix enabled_ns increment xe: - Fix bo leak on error path during fb init - Fix use-after-free due to order vm is put and destroyed" * tag 'drm-fixes-2024-04-19' of https://gitlab.freedesktop.org/drm/kernel: drm/radeon: silence UBSAN warning (v3) drm/radeon: make -fstrict-flex-arrays=3 happy drm/amdgpu: fix visible VRAM handling during faults drm/amdgpu: validate the parameters of bo mapping operations more clearly Revert "drm/amd/display: fix USB-C flag update after enc10 feature init" drm/amdkfd: Fix memory leak in create_process failure drm/amdgpu: remove invalid resource->start check v2 drm/xe/vm: prevent UAF with asid based lookup drm/xe: Fix bo leak in intel_fb_bo_framebuffer_init drm/panel: novatek-nt36682e: don't unregister DSI device drm/panel: visionox-rm69299: don't unregister DSI device drm/nouveau/dp: Don't probe eDP ports twice harder drm/nouveau/kms/nv50-: Disable AUX bus for disconnected DP ports drm/v3d: Don't increment `enabled_ns` twice drm/vmwgfx: Sort primary plane formats by order of preference drm/vmwgfx: Fix crtc's atomic check conditional drm/vmwgfx: Fix prime import/export drm/ttm: stop pooling cached NUMA pages v2 drm: nv04: Fix out of bounds access nouveau: fix instmem race condition around ptr stores
2024-04-19Merge tag 'mm-hotfixes-stable-2024-04-18-14-41' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "15 hotfixes. 9 are cc:stable and the remainder address post-6.8 issues or aren't considered suitable for backporting. There are a significant number of fixups for this cycle's page_owner changes (series "page_owner: print stacks and their outstanding allocations"). Apart from that, singleton changes all over, mainly in MM" * tag 'mm-hotfixes-stable-2024-04-18-14-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: nilfs2: fix OOB in nilfs_set_de_type MAINTAINERS: update Naoya Horiguchi's email address fork: defer linking file vma until vma is fully initialized mm/shmem: inline shmem_is_huge() for disabled transparent hugepages mm,page_owner: defer enablement of static branch Squashfs: check the inode number is not the invalid value of zero mm,swapops: update check in is_pfn_swap_entry for hwpoison entries mm/memory-failure: fix deadlock when hugetlb_optimize_vmemmap is enabled mm/userfaultfd: allow hugetlb change protection upon poison entry mm,page_owner: fix printing of stack records mm,page_owner: fix accounting of pages when migrating mm,page_owner: fix refcount imbalance mm,page_owner: update metadata for tail pages userfaultfd: change src_folio after ensuring it's unpinned in UFFDIO_MOVE mm/madvise: make MADV_POPULATE_(READ|WRITE) handle VM_FAULT_RETRY properly
2024-04-19drm/atomic-helper: fix parameter order in drm_format_conv_state_copy() callLucas Stach
Old and new state parameters are swapped, so the old state was cleared instead of the new duplicated state. Fixes: 903674588a48 ("drm/atomic-helper: Add format-conversion state to shadow-plane state") Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Leonard Göhrs <l.goehrs@pengutronix.de> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: <stable@vger.kernel.org> # v6.8+ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240404081756.2714424-1-l.stach@pengutronix.de
2024-04-19arm64: hibernate: Fix level3 translation fault in swsusp_save()Yaxiong Tian
On arm64 machines, swsusp_save() faults if it attempts to access MEMBLOCK_NOMAP memory ranges. This can be reproduced in QEMU using UEFI when booting with rodata=off debug_pagealloc=off and CONFIG_KFENCE=n: Unable to handle kernel paging request at virtual address ffffff8000000000 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault Data abort info: ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=00000000eeb0b000 [ffffff8000000000] pgd=180000217fff9803, p4d=180000217fff9803, pud=180000217fff9803, pmd=180000217fff8803, pte=0000000000000000 Internal error: Oops: 0000000096000007 [#1] SMP Internal error: Oops: 0000000096000007 [#1] SMP Modules linked in: xt_multiport ipt_REJECT nf_reject_ipv4 xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_filter bpfilter rfkill at803x snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg dwmac_generic stmmac_platform snd_hda_codec stmmac joydev pcs_xpcs snd_hda_core phylink ppdev lp parport ramoops reed_solomon ip_tables x_tables nls_iso8859_1 vfat multipath linear amdgpu amdxcp drm_exec gpu_sched drm_buddy hid_generic usbhid hid radeon video drm_suballoc_helper drm_ttm_helper ttm i2c_algo_bit drm_display_helper cec drm_kms_helper drm CPU: 0 PID: 3663 Comm: systemd-sleep Not tainted 6.6.2+ #76 Source Version: 4e22ed63a0a48e7a7cff9b98b7806d8d4add7dc0 Hardware name: Greatwall GW-XXXXXX-XXX/GW-XXXXXX-XXX, BIOS KunLun BIOS V4.0 01/19/2021 pstate: 600003c5 (nZCv DAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : swsusp_save+0x280/0x538 lr : swsusp_save+0x280/0x538 sp : ffffffa034a3fa40 x29: ffffffa034a3fa40 x28: ffffff8000001000 x27: 0000000000000000 x26: ffffff8001400000 x25: ffffffc08113e248 x24: 0000000000000000 x23: 0000000000080000 x22: ffffffc08113e280 x21: 00000000000c69f2 x20: ffffff8000000000 x19: ffffffc081ae2500 x18: 0000000000000000 x17: 6666662074736420 x16: 3030303030303030 x15: 3038666666666666 x14: 0000000000000b69 x13: ffffff9f89088530 x12: 00000000ffffffea x11: 00000000ffff7fff x10: 00000000ffff7fff x9 : ffffffc08193f0d0 x8 : 00000000000bffe8 x7 : c0000000ffff7fff x6 : 0000000000000001 x5 : ffffffa0fff09dc8 x4 : 0000000000000000 x3 : 0000000000000027 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 000000000000004e Call trace: swsusp_save+0x280/0x538 swsusp_arch_suspend+0x148/0x190 hibernation_snapshot+0x240/0x39c hibernate+0xc4/0x378 state_store+0xf0/0x10c kobj_attr_store+0x14/0x24 The reason is swsusp_save() -> copy_data_pages() -> page_is_saveable() -> kernel_page_present() assuming that a page is always present when can_set_direct_map() is false (all of rodata_full, debug_pagealloc_enabled() and arm64_kfence_can_set_direct_map() false), irrespective of the MEMBLOCK_NOMAP ranges. Such MEMBLOCK_NOMAP regions should not be saved during hibernation. This problem was introduced by changes to the pfn_valid() logic in commit a7d9f306ba70 ("arm64: drop pfn_valid_within() and simplify pfn_valid()"). Similar to other architectures, drop the !can_set_direct_map() check in kernel_page_present() so that page_is_savable() skips such pages. Fixes: a7d9f306ba70 ("arm64: drop pfn_valid_within() and simplify pfn_valid()") Cc: <stable@vger.kernel.org> # 5.14.x Suggested-by: Mike Rapoport <rppt@kernel.org> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Co-developed-by: xiongxin <xiongxin@kylinos.cn> Signed-off-by: xiongxin <xiongxin@kylinos.cn> Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Link: https://lore.kernel.org/r/20240417025248.386622-1-tianyaxiong@kylinos.cn [catalin.marinas@arm.com: rework commit message] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-04-19drm/i915/dg2: wait for HuC load completion before running selftestsDaniele Ceraolo Spurio
On DG2, submissions to VCS engines tied to a gem context are blocked until the HuC is loaded. Since some selftests do use a gem context, wait for the HuC load to complete before running the tests to avoid contamination. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10564 Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240410201505.894594-1-daniele.ceraolospurio@intel.com
2024-04-19drm/xe: Define all possible engines in media IP descriptorsMatt Roper
Rather than trying to identify exactly which engines are available on each platform in the IP descriptor, just include the list of all media engines that the IP could theoretically support (i.e., 8 VCS + 4 VECS). We still rely on the media fuse registers to tell us which specific engine instances are actually present on a given platform, so there shouldn't be any functional change. This will help prevent mistakes with engine numbering (for example ambiguity about whether the 2nd VCS engine on a platform with exactly two engines is numbered "VCS1" or "VCS2") and will also future-proof the code a bit more in case new SKUs or platform refreshes extend the engine list in the future. Note that the media fuse register technically has an 8-bit field for VECS engine presence starting on Xe2. However there's still no MMIO register range reserved for VE engines above VECS3, so VE0-VE3 is still consider the "maximum" VE engine mask that the driver can support for now. Bspec: 52614, 52615, 62567 Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417152621.3357990-2-matthew.d.roper@intel.com
2024-04-19drm/i915/dp_mst: Enable HBLANK expansion quirk for UHBR ratesImre Deak
Enabling the 5k@60Hz uncompressed mode on the MediaTek/Dell U3224KBA monitor results in a blank screen, at least on MTL platforms on UHBR link rates with some (<30) uncompressed bpp values. Enabling compression fixes the problem, so do that for now. Windows enables DSC always if the sink supports it and forcing it to enable the mode without compression leads to the same problem above (which suggests a panel issue with uncompressed mode). The same 5k mode on non-UHBR link rates is not affected and lower resolution modes are not affected either. The problem is similar to the one fixed by the HBLANK expansion quirk on Synaptics hubs, with the difference that the problematic mode has a longer HBLANK duration. Also the monitor doesn't report supporting HBLANK expansion; either its internal MST hub does the expansion internally - similarly to the Synaptics hub - or the issue has another root cause, but still related to the mode's short HBLANK duration. Enable the quirk for the monitor adjusting the detection for the above differences. v2: Rebase on drm_dp_128132b_supported() change. Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417142217.457902-1-imre.deak@intel.com
2024-04-19drm/i915/dp_mst: Make HBLANK expansion quirk work for logical portsImre Deak
The DPCD OUI of the logical port on a Dell UHBR monitor - on which the AUX device is used to enable DSC - is all 0. To detect if the HBLANK expansion quirk is required for this monitor use the OUI of the port's parent instead. Since in the above case the DPCD of both the logical port and the parent port reports being a sink device (vs. branch device) type, read the proper sink/branch OUI based on the DPCD device type. This is required by a follow-up patch enabling the quirk for the above Dell monitor. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-11-imre.deak@intel.com
2024-04-19drm/dp_mst: Add drm_dp_mst_aux_for_parent()Imre Deak
Add a function to get the AUX device of the parent of an MST port, used by a follow-up i915 patch in the patchset. v2: Move drm_dp_mst_aux_for_parent() forward declaration to this patch (Ankit) Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-10-imre.deak@intel.com
2024-04-19drm/dp_mst: Factor out drm_dp_mst_port_is_logical()Imre Deak
Factor out a function to check if an MST port is logical, used by a follow-up i915 patch in the patchset. v2: Move drm_dp_mst_aux_for_parent() forward declaration to the next patch. (Ankit) Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-9-imre.deak@intel.com
2024-04-19drm/dp: Add drm_dp_128b132b_supported()Imre Deak
Factor out a function to check for 128b/132b channel coding support used by a follow-up patch in the patchset. v2: s/drm_dp_uhbr_channel_coding_supported()/drm_dp128b132b_supported() (Jani) Cc: dri-devel@lists.freedesktop.org Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Manasi Navare <navaremanasi@chromium.org> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417141936.457796-1-imre.deak@intel.com
2024-04-19drm/i915/dp_mst: Sanitize calculating the DSC DPT bpp limitImre Deak
Instead of checking each compressed bpp value against the maximum DSC/DPT bpp, simplify things by calculating the maximum bpp upfront and limiting the range of bpps looped over using this maximum. While at it add a comment about the origin of the DSC/DPT bpp limit. Bspec: 49259, 68912 Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-7-imre.deak@intel.com
2024-04-19drm/i915/dp_mst: Account with the DSC DPT bpp limit on MTLImre Deak
The DPT/DSC bpp limit should be accounted for on MTL platforms as well, do so. Bspec: 49259 Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-6-imre.deak@intel.com
2024-04-19drm/i915/dp_mst: Account for channel coding efficiency in the DSC DPT bpp limitImre Deak
The DSC DPT interface BW limit check should take into account the link clock's (aka DDI clock in bspec) channel coding efficiency overhead. Bspec suggests that the FEC overhead needs to be applied, however HW people claim this isn't the case, nor is any overhead applicable. However based on testing various 5k/6k modes both on the DELL U3224KBA monitor and the Unigraf UCD-500 CTS test device, both the channel coding efficiency (which includes the FEC overhead) and an additional 3% overhead must be accounted for to get these modes working. Bspec: 49259 v2: - Apply an additional 3% overhead, add a commit log and code comment about these overheads and the relation to the Bspec BW limit formula. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-5-imre.deak@intel.com
2024-04-19Merge tag 'usb-serial-6.9-rc5' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial device ids for 6.9-rc5 Here are some new modem device ids for 6.9-rc5. All have been in linux-next with no reported issues. * tag 'usb-serial-6.9-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Telit FN920C04 rmnet compositions USB: serial: option: add Rolling RW101-GL and RW135-GL support USB: serial: option: add Lonsung U8300/U9300 product USB: serial: option: add support for Fibocom FM650/FG650 USB: serial: option: support Quectel EM060K sub-models USB: serial: option: add Fibocom FM135-GL variants
2024-04-19blk-iocost: do not WARN if iocg was already offlinedLi Nan
In iocg_pay_debt(), warn is triggered if 'active_list' is empty, which is intended to confirm iocg is active when it has debt. However, warn can be triggered during a blkcg or disk removal, if iocg_waitq_timer_fn() is run at that time: WARNING: CPU: 0 PID: 2344971 at block/blk-iocost.c:1402 iocg_pay_debt+0x14c/0x190 Call trace: iocg_pay_debt+0x14c/0x190 iocg_kick_waitq+0x438/0x4c0 iocg_waitq_timer_fn+0xd8/0x130 __run_hrtimer+0x144/0x45c __hrtimer_run_queues+0x16c/0x244 hrtimer_interrupt+0x2cc/0x7b0 The warn in this situation is meaningless. Since this iocg is being removed, the state of the 'active_list' is irrelevant, and 'waitq_timer' is canceled after removing 'active_list' in ioc_pd_free(), which ensures iocg is freed after iocg_waitq_timer_fn() returns. Therefore, add the check if iocg was already offlined to avoid warn when removing a blkcg or disk. Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20240419093257.3004211-1-linan666@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-19drm/i915/dp_mst: Fix BW limit check when calculating DSC DPT bppImre Deak
The DSC DPT bpp limit check should only fail if the available DPT BW is less than the required BW, fix the check accordingly. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-4-imre.deak@intel.com
2024-04-19drm/i915/dp_mst: Fix symbol clock when calculating the DSC DPT bpp limitImre Deak
The expected link symbol clock unit when calculating the DSC DPT bpp limit is kSymbols/sec, aligning with the dotclock's kPixels/sec unit based on the crtc clock. As opposed to this port_clock is used - which has a 10 kbits/sec unit - with the resulting symbol clock in 10 kSymbols/sec units (disregarding the rounding error for the 13.5Gbps rate). Fix the calculation using the expected 10x factor. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-3-imre.deak@intel.com
2024-04-19drm/i915/dp: Fix DSC line buffer depth programmingImre Deak
Fix the calculation of the DSC line buffer depth. This is limited both by the source's and sink's maximum line buffer depth, but the former one was not taken into account. On all Intel platform's the source's maximum buffer depth is 13, so the overall limit is simply the minimum of the source/sink's limit, regardless of the DSC version. This leaves the DSI DSC line buffer depth calculation as-is, trusting VBT. On DSC version 1.2 for sinks reporting a maximum line buffer depth of 16 the line buffer depth was incorrectly programmed as 0, leading to a corruption in color gradients / lines on the decompressed screen image. Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Manasi Navare <navaremanasi@chromium.org> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-2-imre.deak@intel.com
generated by cgit (git 2.34.1) at 2025-09-12 21:29:00 +0000