| Age | Commit message (Collapse) | Author |
|---|
|
Since the dynamic preemption has been enabled for PREEMPT_RT we have now
CONFIG_PREEMPT and CONFIG_PREEMPT_RT set simultaneously. This affects
the vermagic strings which comes now PREEMPT with PREEMPT_RT enabled.
The PREEMPT_RT module usually can not be loaded on a PREEMPT kernel
because some symbols are missing.
However if the symbols are fine then it continues and it crashes later.
The problem is that the struct module has a different layout and the
num_exentries or init members are at a different position leading to a
crash later on. This is not necessary caught by the size check in
elf_validity_cache_index_mod() because the mem member has an alignment
requirement of __module_memory_align which is big enough keep the total
size unchanged. Therefore we should keep the string accurate instead of
removing it.
Move the PREEMPT_RT check before the PREEMPT so that it takes precedence
if both symbols are enabled.
Fixes: 35772d627b55c ("sched: Enable PREEMPT_DYNAMIC for PREEMPT_RT")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Link: https://lore.kernel.org/r/20241205160602.3lIAsJRT@linutronix.de
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
|
|
Remove hard-coded strings by using the str_on_off() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241220191705.1446-2-thorsten.blum@linux.dev
|
|
|
|
Pull KVM x86 fixes from Paolo Bonzini:
- Disable AVIC on SNP-enabled systems that don't allow writes to the
virtual APIC page, as such hosts will hit unexpected RMP #PFs in the
host when running VMs of any flavor.
- Fix a WARN in the hypercall completion path due to KVM trying to
determine if a guest with protected register state is in 64-bit mode
(KVM's ABI is to assume such guests only make hypercalls in 64-bit
mode).
- Allow the guest to write to supported bits in MSR_AMD64_DE_CFG to fix
a regression with Windows guests, and because KVM's read-only
behavior appears to be entirely made up.
- Treat TDP MMU faults as spurious if the faulting access is allowed
given the existing SPTE. This fixes a benign WARN (other than the
WARN itself) due to unexpectedly replacing a writable SPTE with a
read-only SPTE.
- Emit a warning when KVM is configured with ignore_msrs=1 and also to
hide the MSRs that the guest is looking for from the kernel logs.
ignore_msrs can trick guests into assuming that certain processor
features are present, and this in turn leads to bogus bug reports.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: let it be known that ignore_msrs is a bad idea
KVM: VMX: don't include '<linux/find.h>' directly
KVM: x86/mmu: Treat TDP MMU faults as spurious if access is already allowed
KVM: SVM: Allow guest writes to set MSR_AMD64_DE_CFG bits
KVM: x86: Play nice with protected guests in complete_hypercall_exit()
KVM: SVM: Disable AVIC on SNP-enabled system without HvInUseWrAllowed feature
|
|
KVM x86 fixes for 6.13:
- Disable AVIC on SNP-enabled systems that don't allow writes to the virtual
APIC page, as such hosts will hit unexpected RMP #PFs in the host when
running VMs of any flavor.
- Fix a WARN in the hypercall completion path due to KVM trying to determine
if a guest with protected register state is in 64-bit mode (KVM's ABI is to
assume such guests only make hypercalls in 64-bit mode).
- Allow the guest to write to supported bits in MSR_AMD64_DE_CFG to fix a
regression with Windows guests, and because KVM's read-only behavior appears
to be entirely made up.
- Treat TDP MMU faults as spurious if the faulting access is allowed given the
existing SPTE. This fixes a benign WARN (other than the WARN itself) due to
unexpectedly replacing a writable SPTE with a read-only SPTE.
|
|
When running KVM with ignore_msrs=1 and report_ignored_msrs=0, the user has
no clue that that the guest is being lied to. This may cause bug reports
such as https://gitlab.com/qemu-project/qemu/-/issues/2571, where enabling
a CPUID bit in QEMU caused Linux guests to try reading MSR_CU_DEF_ERR; and
being lied about the existence of MSR_CU_DEF_ERR caused the guest to assume
other things about the local APIC which were not true:
Sep 14 12:02:53 kernel: mce: [Firmware Bug]: Your BIOS is not setting up LVT offset 0x2 for deferred error IRQs correctly.
Sep 14 12:02:53 kernel: unchecked MSR access error: RDMSR from 0x852 at rIP: 0xffffffffb548ffa7 (native_read_msr+0x7/0x40)
Sep 14 12:02:53 kernel: Call Trace:
...
Sep 14 12:02:53 kernel: native_apic_msr_read+0x20/0x30
Sep 14 12:02:53 kernel: setup_APIC_eilvt+0x47/0x110
Sep 14 12:02:53 kernel: mce_amd_feature_init+0x485/0x4e0
...
Sep 14 12:02:53 kernel: [Firmware Bug]: cpu 0, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu
Without reported_ignored_msrs=0 at least the host kernel log will contain
enough information to avoid going on a wild goose chase. But if reports
about individual MSR accesses are being silenced too, at least complain
loudly the first time a VM is started.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The header clearly states that it does not want to be included directly,
only via '<linux/bitmap.h>'. Replace the include accordingly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Message-ID: <20241217070539.2433-2-wsa+renesas@sang-engineering.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Disable #address-cells/#size-cells warning on coreboot (Chromebooks)
platforms
- Add missing root #address-cells/#size-cells in default empty DT
- Fix uninitialized variable in of_irq_parse_one()
- Fix interrupt-map cell length check in of_irq_parse_imap_parent()
- Fix refcount handling in __of_get_dma_parent()
- Fix error path in of_parse_phandle_with_args_map()
- Fix dma-ranges handling with flags cells
- Drop explicit fw_devlink handling of 'interrupt-parent'
- Fix "compression" typo in fixed-partitions binding
- Unify "fsl,liodn" property type definitions
* tag 'devicetree-fixes-for-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Add coreboot firmware to excluded default cells list
of/irq: Fix using uninitialized variable @addr_len in API of_irq_parse_one()
of/irq: Fix interrupt-map cell length check in of_irq_parse_imap_parent()
of: Fix refcount leakage for OF node returned by __of_get_dma_parent()
of: Fix error path in of_parse_phandle_with_args_map()
dt-bindings: mtd: fixed-partitions: Fix "compression" typo
of: Add #address-cells/#size-cells in the device-tree root empty node
dt-bindings: Unify "fsl,liodn" type definitions
of: address: Preserve the flags portion on 1:1 dma-ranges mapping
of/unittest: Add empty dma-ranges address translation tests
of: property: fw_devlink: Do not use interrupt-parent directly
|
|
It claims the issue is only relevant for shared descriptor tables which
is of no concern for POSIX (but then is POSIX of concern to anyone
today?), which I presume predates standarized threading.
The comment also mentions the following systems:
- OpenBSD installing a larval file -- they moved away from it, file is
installed late and EBUSY is returned on conflict
- FreeBSD returning EBADF -- reworked to install the file early like
OpenBSD used to do
- NetBSD "deadlocks in amusing ways" -- their solution looks
Solaris-inspired (not a compliment) and I would not be particularly
surprised if it indeed deadlocked, in amusing ways or otherwise
I don't believe mentioning any of these adds anything and the statement
about the issue not being POSIX-relevant is outdated.
dup2 description in POSIX still does not mention the problem.
Just shorten the comment and be done with it.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20241205154743.1586584-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fix grammar and spelling in the propagate_umount() function.
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241204081218.12141-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Replace the hardcoded value `7` in `put_fc_log()` with `ARRAY_SIZE`.
This improves maintainability by ensuring the loop adapts to changes
in the buffer size.
Signed-off-by: Guo Weikang <guoweikang.kernel@gmail.com>
Link: https://lore.kernel.org/r/20241202081146.1031780-1-guoweikang.kernel@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The routine is used in link_path_walk() for every path component.
To my reading the entire point of the fence was to grab a fully
populated mnt_idmap, but that's already going to happen with mere
consume fence.
Eliminates an actual fence on arm64.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20241130051712.1036527-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The fput() of file rcS might not have completed causing issues when
executing the file.
rcS is opened in do_populate_rootfs before executed. At the end of
do_populate_rootfs() flush_delayed_fput() is called. Now
do_populate_rootfs() assumes that all fput()s caused by
do_populate_rootfs() have completed.
But flush_delayed_fput() can only ensure that fput() on the current
delayed_fput_list has finished. Any file that has been removed from
delayed_fput_list asynchronously in the meantime might not have
completed causing the exec to fail.
do_populate_rootfs delayed_fput_list delayed_fput execve
fput() a
fput() a->b
fput() a->b->rcS
__fput(a)
fput() c
fput() c->d
__fput(b)
flush_delayed_fput
__fput(c)
__fput(d)
__fput(b)
__fput(b) execve(rcS)
Ensure that all delayed work is done by calling flush_delayed_work() in
flush_delayed_fput() explicitly.
Signed-off-by: Chen Lin <chen.lin5@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Link: https://lore.kernel.org/r/20241023135850067m3w2R0UXESiVCYz_wdAoT@zte.com.cn
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: Yang Tao <yang.tao172@zte.com.cn>
Cc: Xu Xin <xu.xin16@zte.com.cn>
[brauner: rewrite commit message]
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We are attempting to eliminate page->index, so use page->private
instead.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20241125175443.2911738-1-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use proc_douintvec_minmax() instead of proc_dointvec_minmax() to handle
sysctl_nr_open, because its data type is unsigned int, not int.
Fixes: 9b80a184eaad ("fs/file: more unsigned file descriptors")
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Link: https://lore.kernel.org/r/20241124034636.325337-1-alexjlzheng@tencent.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Mateusz Guzik <mjguzik@gmail.com> says:
quote:
When utilized it dodges strlen() in vfs_readlink(), giving about 1.5%
speed up when issuing readlink on /initrd.img on ext4.
The size is stored in a union with i_devices, which is never looked at
unless the inode is for a device.
ext4 and tmpfs are patched, other filesystems can also get there with
some more work.
benchmark:
plug into will-it-scale into tests/readlink1.c:
char *testcase_description = "readlink /initrd.img";
void testcase(unsigned long long *iterations, unsigned long nr)
{
char *tmplink = "/initrd.img";
char buf[1024];
while (1) {
int error = readlink(tmplink, buf, sizeof(buf));
assert(error > 0);
(*iterations)++;
}
}
* patches from https://lore.kernel.org/r/20241120112037.822078-1-mjguzik@gmail.com:
tmpfs: use inode_set_cached_link()
ext4: use inode_set_cached_link()
vfs: support caching symlink lengths in inodes
Link: https://lore.kernel.org/r/20241120112037.822078-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20241120112037.822078-4-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add some kernel-doc notation to structs in fiemap header files
then pull that into Documentation/filesystems/fiemap.rst
instead of duplicating the header file structs in fiemap.rst.
This helps to future-proof fiemap.rst against struct changes.
Add missing flags documentation from header files into fiemap.rst
for FIEMAP_FLAG_CACHE and FIEMAP_EXTENT_SHARED.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20241121011352.201907-1-rdunlap@infradead.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20241120112037.822078-3-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Annotation already used to be there, but got lost in 52ac39e5db5148f7
("seqlock: seqcount_t: Implement all read APIs as statement expressions").
Does not look like it was intentional.
Without it gcc 12 decides to compile the following in path_init:
nd->m_seq = __read_seqcount_begin(&mount_lock.seqcount);
nd->r_seq = __read_seqcount_begin(&rename_lock.seqcount);
into 2 cases of conditional jumps forward if the value is even, aka
branch prediction miss by default in the common case on x86-64.
With the patch jumps are only for odd values.
before:
[snip]
mov 0x104fe96(%rip),%eax # 0xffffffff82409680 <mount_lock>
test $0x1,%al
je 0xffffffff813b97fa <path_init+122>
pause
mov 0x104fe8a(%rip),%eax # 0xffffffff82409680 <mount_lock>
test $0x1,%al
jne 0xffffffff813b97ee <path_init+110>
mov %eax,0x48(%rbx)
mov 0x104fdfd(%rip),%eax # 0xffffffff82409600 <rename_lock>
test $0x1,%al
je 0xffffffff813b9813 <path_init+147>
pause
mov 0x104fdf1(%rip),%eax # 0xffffffff82409600 <rename_lock>
test $0x1,%al
jne 0xffffffff813b9807 <path_init+135>
[/snip]
after:
[snip]
mov 0x104fec6(%rip),%eax # 0xffffffff82409680 <mount_lock>
test $0x1,%al
jne 0xffffffff813b99af <path_init+607>
mov %eax,0x48(%rbx)
mov 0x104fe35(%rip),%eax # 0xffffffff82409600 <rename_lock>
test $0x1,%al
jne 0xffffffff813b999d <path_init+589>
[/snip]
Interestingly .text gets slightly smaller (as reported by size(1)):
before: 20702563
after: 20702429
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20230727180355.813995-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When utilized it dodges strlen() in vfs_readlink(), giving about 1.5%
speed up when issuing readlink on /initrd.img on ext4.
Filesystems opt in by calling inode_set_cached_link() when creating an
inode.
The size is stored in a new union utilizing the same space as i_devices,
thus avoiding growing the struct or taking up any more space.
Churn-wise the current readlink_copy() helper is patched to accept the
size instead of calculating it.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20241120112037.822078-2-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Christian Brauner <brauner@kernel.org> says:
Allow bind-mounting pidfds. Similar to nsfs let's allow bind-mounts for
pidfds. This allows pidfds to be safely recovered and checked for
process recycling.
Instead of checking d_ops for both nsfs and pidfs we could in a
follow-up patch add a flag argument to struct dentry_operations that
functions similar to file_operations->fop_flags.
* patches from https://lore.kernel.org/r/20241219-work-pidfs-mount-v1-0-dbc56198b839@kernel.org:
selftests: add pidfd bind-mount tests
pidfs: allow bind-mounts
Link: https://lore.kernel.org/r/20241219-work-pidfs-mount-v1-0-dbc56198b839@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Link: https://lore.kernel.org/r/20241219-work-pidfs-mount-v1-2-dbc56198b839@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Allow bind-mounting pidfds. Similar to nsfs let's allow bind-mounts for
pidfds. This allows pidfds to be safely recovered and checked for
process recycling.
Link: https://lore.kernel.org/r/20241219-work-pidfs-mount-v1-1-dbc56198b839@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Two more small fixes, correcting the cacheline size on Raspberry Pi 5
and fixing a logic mistake in the microchip mpfs firmware driver"
* tag 'soc-fixes-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
firmware: microchip: fix UL_IAP lock check in mpfs_auto_update_state()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"25 hotfixes. 16 are cc:stable. 19 are MM and 6 are non-MM.
The usual bunch of singletons and doubletons - please see the relevant
changelogs for details"
* tag 'mm-hotfixes-stable-2024-12-21-12-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (25 commits)
mm: huge_memory: handle strsep not finding delimiter
alloc_tag: fix set_codetag_empty() when !CONFIG_MEM_ALLOC_PROFILING_DEBUG
alloc_tag: fix module allocation tags populated area calculation
mm/codetag: clear tags before swap
mm/vmstat: fix a W=1 clang compiler warning
mm: convert partially_mapped set/clear operations to be atomic
nilfs2: fix buffer head leaks in calls to truncate_inode_pages()
vmalloc: fix accounting with i915
mm/page_alloc: don't call pfn_to_page() on possibly non-existent PFN in split_large_buddy()
fork: avoid inappropriate uprobe access to invalid mm
nilfs2: prevent use of deleted inode
zram: fix uninitialized ZRAM not releasing backing device
zram: refuse to use zero sized block device as backing device
mm: use clear_user_(high)page() for arch with special user folio handling
mm: introduce cpu_icache_is_aliasing() across all architectures
mm: add RCU annotation to pte_offset_map(_lock)
mm: correctly reference merged VMA
mm: use aligned address in copy_user_gigantic_page()
mm: use aligned address in clear_gigantic_page()
mm: shmem: fix ShmemHugePages at swapout
...
|
|
My tests run an allyesconfig build and it failed with the following errors:
LD [M] samples/kfifo/dma-example.ko
ld.lld: error: undefined symbol: nec7210_board_reset
ld.lld: error: undefined symbol: nec7210_read
ld.lld: error: undefined symbol: nec7210_write
It appears that some modules call the function nec7210_board_reset()
that is defined in nec7210.c. In an allyesconfig build, these other
modules are built in. But the file that holds nec7210_board_reset()
has:
obj-m += nec7210.o
Where that "-m" means it only gets built as a module. With the other
modules built in, they have no access to nec7210_board_reset() and the build
fails.
This isn't the only function. After fixing that one, I hit another:
ld.lld: error: undefined symbol: push_gpib_event
ld.lld: error: undefined symbol: gpib_match_device_path
Where push_gpib_event() was also used outside of the file it was defined
in, and that file too only was built as a module.
Since the directory that nec7210.c is only traversed when
CONFIG_GPIB_NEC7210 is set, and the directory with gpib_common.c is only
traversed when CONFIG_GPIB_COMMON is set, use those configs as the
option to build those modules. When it is an allyesconfig, then they
will both be built in and their functions will be available to the other
modules that are also built in.
Fixes: 3ba84ac69b53e ("staging: gpib: Add nec7210 GPIB chip driver")
Fixes: 9dde4559e9395 ("staging: gpib: Add GPIB common core driver")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove stale code in usr/include/headers_check.pl
- Fix issues in the user-mode-linux Debian package
- Fix false-positive "export twice" errors in modpost
* tag 'kbuild-fixes-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: distinguish same module paths from different dump files
kbuild: deb-pkg: Do not install maint scripts for arch 'um'
kbuild: deb-pkg: add debarch for ARCH=um
kbuild: Drop support for include/asm-<arch> in headers_check.pl
|
|
Pull BPF fixes from Daniel Borkmann:
- Fix inlining of bpf_get_smp_processor_id helper for !CONFIG_SMP
systems (Andrea Righi)
- Fix BPF USDT selftests helper code to use asm constraint "m" for
LoongArch (Tiezhu Yang)
- Fix BPF selftest compilation error in get_uprobe_offset when
PROCMAP_QUERY is not defined (Jerome Marchand)
- Fix BPF bpf_skb_change_tail helper when used in context of BPF
sockmap to handle negative skb header offsets (Cong Wang)
- Several fixes to BPF sockmap code, among others, in the area of
socket buffer accounting (Levi Zim, Zijian Zhang, Cong Wang)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test bpf_skb_change_tail() in TC ingress
selftests/bpf: Introduce socket_helpers.h for TC tests
selftests/bpf: Add a BPF selftest for bpf_skb_change_tail()
bpf: Check negative offsets in __bpf_skb_min_len()
tcp_bpf: Fix copied value in tcp_bpf_sendmsg
skmsg: Return copied bytes in sk_msg_memcopy_from_iter
tcp_bpf: Add sk_rmem_alloc related logic for tcp_bpf ingress redirection
tcp_bpf: Charge receive socket buffer in bpf_tcp_ingress()
selftests/bpf: Fix compilation error in get_uprobe_offset()
selftests/bpf: Use asm constraint "m" for LoongArch
bpf: Fix bpf_get_smp_processor_id() on !CONFIG_SMP
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fix a clang build issue with mediatec vcodec
- add missing variable initialization to dib3000mb write function
* tag 'media/v6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: mediatek: vcodec: mark vdec_vp9_slice_map_counts_eob_coef noinline
media: dvb-frontends: dib3000mb: fix uninit-value in dib3000_write_reg
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Krzysztof Wilczyński:
"Two small patches that are important for fixing boot time hang on
Intel JHL7540 'Titan Ridge' platforms equipped with a Thunderbolt
controller.
The boot time issue manifests itself when a PCI Express bandwidth
control is unnecessarily enabled on the Thunderbolt controller
downstream ports, which only supports a link speed of 2.5 GT/s in
accordance with USB4 v2 specification (p. 671, sec. 11.2.1, "PCIe
Physical Layer Logical Sub-block").
As such, there is no need to enable bandwidth control on such
downstream port links, which also works around the issue.
Both patches were tested by the original reporter on the hardware on
which the failure origin golly manifested itself. Both fixes were
proven to resolve the reported boot hang issue, and both patches have
been in linux-next this week with no reported problems"
* tag 'pci-v6.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/bwctrl: Enable only if more than one speed is supported
PCI: Honor Max Link Speed when determining supported speeds
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix some amd-pstate driver issues:
- Detect preferred core support in amd-pstate before driver
registration to avoid initialization ordering issues (K Prateek
Nayak)
- Fix issues with with boost numerator handling in amd-pstate leading
to inconsistently programmed CPPC max performance values (Mario
Limonciello)"
* tag 'pm-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Use boost numerator for upper bound of frequencies
cpufreq/amd-pstate: Store the boost numerator as highest perf again
cpufreq/amd-pstate: Detect preferred core support before driver registration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Fix two issues with the user thermal thresholds feature introduced in
this development cycle (Daniel Lezcano)"
* tag 'thermal-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/thresholds: Fix boundaries and detection routine
thermal/thresholds: Fix uapi header macros leading to a compilation error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Unbreak ACPI EC support on LoongArch that has been broken earlier in
this development cycle (Huacai Chen)"
* tag 'acpi-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Enable EC support on LoongArch by default
|
|
Pull smb client fixes from Steve French:
- fix regression in display of write stats
- fix rmmod failure with network namespaces
- two minor cleanups
* tag '6.13-rc3-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: fix bytes written value in /proc/fs/cifs/Stats
smb: client: fix TCP timers deadlock after rmmod
smb: client: Deduplicate "select NETFS_SUPPORT" in Kconfig
smb: use macros instead of constants for leasekey size and default cifsattrs value
|
|
Pull NFS client fixes from Trond Myklebust:
- NFS/pnfs: Fix a live lock between recalled layouts and layoutget
- Fix a build warning about an undeclared symbol 'nfs_idmap_cache_timeout'
* tag 'nfs-for-6.13-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
fs/nfs: fix missing declaration of nfs_idmap_cache_timeout
NFS/pnfs: Fix a live lock between recalled layouts and layoutget
|
|
Pull ceph fixes from Ilya Dryomov:
"A handful of important CephFS fixes from Max, Alex and myself: memory
corruption due to a buffer overrun, potential infinite loop and
several memory leaks on the error paths. All but one marked for
stable"
* tag 'ceph-for-6.13-rc4' of https://github.com/ceph/ceph-client:
ceph: allocate sparse_ext map only for sparse reads
ceph: fix memory leak in ceph_direct_read_write()
ceph: improve error handling and short/overflow-read logic in __ceph_sync_read()
ceph: validate snapdirname option length when mounting
ceph: give up on paths longer than PATH_MAX
ceph: fix memory leaks in __ceph_sync_read()
|
|
Switch to generating a private list of interior nodes to delete, instead
of using the equivalence class in the global data structure.
This eliminates possible races with snapshot creation, and is much
cleaner - it'll let us delete a lot of janky code for calculating and
maintaining the equivalence classes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When deleting dead snapshots, we move keys from redundant interior
snapshot nodes to child nodes - unless there's already a key, in which
case the ancestor key is deleted.
Previously, we tracked via equiv_seen whether the child snapshot had a
key, but this was tricky w.r.t. transaction restarts, and not
transactionally safe w.r.t. updates in the child snapshot.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This breaks when the trigger is inserting updates for the same btree, as
the inode trigger now does.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Originally, we ran insert triggers before overwrite so that if an extent
was being moved (by fallocate insert/collapse range), the bucket sector
count wouldn't hit 0 partway through, and so we don't trigger state
changes caused by that too soon.
But this is better solved by just moving the data type change to the
alloc trigger itself, where it's already called.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Normally, whitouts (KEY_TYPE_whitout) are filtered from btree lookups,
since they exist only to represent deletions of keys in ancestor
snapshots - except, they should not be filtered in
BTREE_ITER_all_snapshots mode, so that e.g. snapshot deletion can clean
them up.
This means that that the key cache has to store whiteouts, and key cache
fills cannot filter them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In BTREE_ITER_all_snapshots mode, we're required to only return keys
where the snapshot field matches the iterator position -
BTREE_ITER_filter_snapshots requires pulling keys into the key cache
from ancestor snapshots, so we have to check for that.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Change to match bch2_btree_trans_peek_updates() calling convention.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Now handled in one place.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
check_inode_hash_info_matches_root()
Clang 18 and newer warns (or errors with CONFIG_WERROR=y):
fs/bcachefs/str_hash.c:164:2: error: label followed by a declaration is a C23 extension [-Werror,-Wc23-extensions]
164 | struct bch_inode_unpacked inode;
| ^
In Clang 17 and prior, this is an unconditional hard error:
fs/bcachefs/str_hash.c:164:2: error: expected expression
164 | struct bch_inode_unpacked inode;
| ^
fs/bcachefs/str_hash.c:165:30: error: use of undeclared identifier 'inode'
165 | ret = bch2_inode_unpack(k, &inode);
| ^
fs/bcachefs/str_hash.c:169:55: error: use of undeclared identifier 'inode'
169 | struct bch_hash_info hash2 = bch2_hash_info_init(c, &inode);
| ^
fs/bcachefs/str_hash.c:171:40: error: use of undeclared identifier 'inode'
171 | ret = repair_inode_hash_info(trans, &inode);
| ^
Add an empty statement between the label and the declaration to fix the
warning/error without disturbing the code too much.
Fixes: 2519d3b0d656 ("bcachefs: bch2_str_hash_check_key() now checks inode hash info")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412092339.QB7hffGC-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_snapshot_equiv() is going away; convert users that just wanted to
know if the snapshot exists to something better
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
