| Age | Commit message (Collapse) | Author |
|---|
|
The xa_store() may fail due to memory allocation failure because there
is no guarantee that the index NVME_CSI_NVM is already used. This fix
introduces a new function to handle the error path.
Fixes: cc115cbe12d9 ("nvme: always initialize known command effects")
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
envent -> event.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The recently added WARN() for deprecated #address-cells and #size-cells
triggered a WARN when of_platform_populate() (which calls
of_address_to_resource()) is used on nodes with non-translatable
addresses. This case is expected to return an error.
Rework the bus matching to allow no match and make the default require
an #address-cells property. That should be safe to do as any platform
missing #address-cells would have a warning already.
Fixes: 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells handling")
Tested-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://lore.kernel.org/r/20250110215030.3637845-2-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
non-translatable address
of_address_to_resource() on a non-translatable address should return an
error. Additionally, this case also triggers a spurious WARN for
missing #address-cells/#size-cells.
Link: https://lore.kernel.org/r/20250110215030.3637845-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are three small serial driver fixes tree. They resolve some
reported issues:
- stm32 break control fix
- 8250 runtime pm usage counter fix
- imx driver locking fix
All have been in my tree and linux-next for three weeks now, with no
reported issues"
* tag 'tty-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: stm32: use port lock wrappers for break control
serial: imx: Use uart_port_lock_irq() instead of uart_port_lock()
tty: serial: 8250: Fix another runtime PM usage counter underflow
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.13-rc7.
Included in here are:
- usb serial new device ids
- typec bugfixes for reported issues
- dwc3 driver fixes
- chipidea driver fixes
- gadget driver fixes
- other minor fixes for reported problems.
All of these have been in linux-next for a while, with no reported
issues"
* tag 'usb-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Neoway N723-EA support
USB: serial: option: add MeiG Smart SRM815
USB: serial: cp210x: add Phoenix Contact UPS Device
usb: typec: fix pm usage counter imbalance in ucsi_ccg_sync_control()
usb-storage: Add max sectors quirk for Nokia 208
usb: gadget: midi2: Reverse-select at the right place
usb: gadget: f_fs: Remove WARN_ON in functionfs_bind
USB: core: Disable LPM only for non-suspended ports
usb: fix reference leak in usb_new_device()
usb: typec: tcpci: fix NULL pointer issue on shared irq case
usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null
usb: chipidea: ci_hdrc_imx: decrement device's refcount in .remove() and in the error path of .probe()
usb: typec: ucsi: Set orientation as none when connector is unplugged
usb: gadget: configfs: Ignore trailing LF for user strings to cdev
USB: usblp: return error when setting unsupported protocol
usb: gadget: f_uac2: Fix incorrect setting of bNumEndpoints
usb: typec: tcpm/tcpci_maxim: fix error code in max_contaminant_read_resistance_kohm()
usb: host: xhci-plat: set skip_phy_initialization if software node has XHCI_SKIP_PHY_INIT property
usb: dwc3-am62: Disable autosuspend during remove
usb: dwc3: gadget: fix writing NYET threshold
|
|
Pull kvm fixes from Paolo Bonzini:
"The largest part here is for KVM/PPC, where a NULL pointer dereference
was introduced in the 6.13 merge window and is now fixed.
There's some "holiday-induced lateness", as the s390 submaintainer put
it, but otherwise things looks fine.
s390:
- fix a latent bug when the kernel is compiled in debug mode
- two small UCONTROL fixes and their selftests
arm64:
- always check page state in hyp_ack_unshare()
- align set_id_regs selftest with the fact that ASIDBITS field is RO
- various vPMU fixes for bugs that only affect nested virt
PPC e500:
- Fix a mostly impossible (but just wrong) case where IRQs were never
re-enabled
- Observe host permissions instead of mapping readonly host pages as
guest-writable. This fixes a NULL-pointer dereference in 6.13
- Replace brittle VMA-based attempts at building huge shadow TLB
entries with PTE lookups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: e500: perform hugepage check after looking up the PFN
KVM: e500: map readonly host pages for read
KVM: e500: track host-writability of pages
KVM: e500: use shadow TLB entry as witness for writability
KVM: e500: always restore irqs
KVM: s390: selftests: Add has device attr check to uc_attr_mem_limit selftest
KVM: s390: selftests: Add ucontrol gis routing test
KVM: s390: Reject KVM_SET_GSI_ROUTING on ucontrol VMs
KVM: s390: selftests: Add ucontrol flic attr selftests
KVM: s390: Reject setting flic pfault attributes on ucontrol VMs
KVM: s390: vsie: fix virtual/physical address in unpin_scb()
KVM: arm64: Only apply PMCR_EL0.P to the guest range of counters
KVM: arm64: nv: Reload PMU events upon MDCR_EL2.HPME change
KVM: arm64: Use KVM_REQ_RELOAD_PMU to handle PMCR_EL0.E change
KVM: arm64: Add unified helper for reprogramming counters by mask
KVM: arm64: Always check the state from hyp_ack_unshare()
KVM: arm64: Fix set_id_regs selftest for ASIDBITS becoming unwritable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Fix a #GP in the perf user callchain code caused by a race between
uprobe freeing the task and the bpf profiler unwinding the task's
user stack
* tag 'perf_urgent_for_v6.13_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes: Fix race in uprobe_free_utask
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Check whether shadow stack is active before using the ptrace regset
getter
- Remove a wrong BUG_ON in the early static call code which breaks Xen
PVH when booting as dom0
* tag 'x86_urgent_for_v6.13_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Ensure shadow stack is active before "getting" registers
x86/static-call: Remove early_boot_irqs_disabled check to fix Xen PVH dom0
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: three small bugfixes
Fix a latent bug when the kernel is compiled in debug mode.
Two small UCONTROL fixes and their selftests.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.13, part #3
- Always check page state in hyp_ack_unshare()
- Align set_id_regs selftest with the fact that ASIDBITS field is RO
- Various vPMU fixes for bugs that only affect nested virt
|
|
The new __kvm_faultin_pfn() function is upset by the fact that e500
KVM ignores host page permissions - __kvm_faultin requires a "writable"
outgoing argument, but e500 KVM is passing NULL.
While a simple fix would be possible that simply allows writable to
be NULL, it is quite ugly to have e500 KVM ignore completely the host
permissions and map readonly host pages as guest-writable. Merge a more
complete fix and remove the VMA-based attempts at building huge shadow TLB
entries. Using a PTE lookup, similar to what is done for x86, is better
and works with remap_pfn_range() because it does not assume that VM_PFNMAP
areas are contiguous. Note that the same incorrect logic is there in
ARM's get_vma_page_shift() and RISC-V's kvm_riscv_gstage_ioremap().
Fortunately, for e500 most of the code is already there; it just has to
be changed to compute the range from find_linux_pte()'s output rather
than find_vma(). The new code works for both VM_PFNMAP and hugetlb
mappings, so the latter is removed.
Patches 2-5 were tested by the reporter, Christian Zigotzky. Since
the difference with v1 is minimal, I am going to send it to Linus
today.
|
|
e500 KVM tries to bypass __kvm_faultin_pfn() in order to map VM_PFNMAP
VMAs as huge pages. This is a Bad Idea because VM_PFNMAP VMAs could
become noncontiguous as a result of callsto remap_pfn_range().
Instead, use the already existing host PTE lookup to retrieve a
valid host-side mapping level after __kvm_faultin_pfn() has
returned. Then find the largest size that will satisfy the
guest's request while staying within a single host PTE.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The new __kvm_faultin_pfn() function is upset by the fact that e500 KVM
ignores host page permissions - __kvm_faultin requires a "writable"
outgoing argument, but e500 KVM is nonchalantly passing NULL.
If the host page permissions do not include writability, the shadow
TLB entry is forcibly mapped read-only.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add the possibility of marking a page so that the UW and SW bits are
force-cleared. This is stored in the private info so that it persists
across multiple calls to kvmppc_e500_setup_stlbe.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvmppc_e500_ref_setup is returning whether the guest TLB entry is writable,
which is than passed to kvm_release_faultin_page. This makes little sense
for two reasons: first, because the function sets up the private data for
the page and the return value feels like it has been bolted on the side;
second, because what really matters is whether the _shadow_ TLB entry is
writable. If it is not writable, the page can be released as non-dirty.
Shift from using tlbe_is_writable(gtlbe) to doing the same check on
the shadow TLB entry.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If find_linux_pte fails, IRQs will not be restored. This is unlikely
to happen in practice since it would have been reported as hanging
hosts, but it should of course be fixed anyway.
Cc: stable@vger.kernel.org
Reported-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The H7606W laptop has almost the exact same codec setup as the GA403
and so the same quirks apply to it.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250111022754.177551-2-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The GA605W laptop has almost the exact same codec setup as the GA403
and so the same quirks apply to it.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250111022754.177551-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
"Fix to free trace_kprobe objects at a failure path in
__trace_kprobe_create() function. This fixes a memory leak"
* tag 'probes-fixes-v6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix to free objects when failed to copy a symbol
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"One patch to fix error handling in drivetemp driver"
* tag 'hwmon-for-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (drivetemp) Fix driver producing garbage data when SCSI errors occur
|
|
Pull block fix from Jens Axboe:
"A single fix for a use-after-free in the BFQ IO scheduler"
* tag 'block-6.13-20250111' of git://git.kernel.dk/linux:
block, bfq: fix waker_bfqq UAF after bfq_split_bfqq()
|
|
Pull io_uring fixes from Jens Axboe:
- Fix for multishot timeout updates only using the updated value for
the first invocation, not subsequent ones
- Silence a false positive lockdep warning
- Fix the eventfd signaling and putting RCU logic
- Fix fault injected SQPOLL setup not clearing the task pointer in the
error path
- Fix local task_work looking at the SQPOLL thread rather than just
signaling the safe variant. Again one of those theoretical issues,
which should be closed up none the less.
* tag 'io_uring-6.13-20250111' of git://git.kernel.dk/linux:
io_uring: don't touch sqd->thread off tw add
io_uring/sqpoll: zero sqd->thread on tctx errors
io_uring/eventfd: ensure io_eventfd_signal() defers another RCU period
io_uring: silence false positive warnings
io_uring/timeout: fix multishot updates
|
|
Pull smb client fix from Steve French:
- fix unneeded session setup retry due to stale password e.g. for DFS
automounts
* tag '6.13-rc6-SMB3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: sync the root session and superblock context passwords before automounting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Over the Christmas break a couple of devicetree fixes came in for
Rockchips, Qualcomm and NXP/i.MX. These add some missing board
specific properties, address build time warnings,
The USB/TOG supoprt on X1 Elite regressed, so two earlier DT changes
get reverted for now.
Aside from the devicetree fixes, there is One build fix for the stm32
firewall driver, and a defconfig change to enable SPDIF support for
i.MX"
* tag 'soc-fixes-6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firewall: remove misplaced semicolon from stm32_firewall_get_firewall
arm64: dts: rockchip: add hevc power domain clock to rk3328
arm64: dts: rockchip: Fix the SD card detection on NanoPi R6C/R6S
arm64: dts: qcom: sa8775p: fix the secure device bootup issue
Revert "arm64: dts: qcom: x1e80100: enable OTG on USB-C controllers"
Revert "arm64: dts: qcom: x1e80100-crd: enable otg on usb ports"
arm64: dts: qcom: x1e80100: Fix up BAR space size for PCIe6a
Revert "arm64: dts: qcom: x1e78100-t14s: enable otg on usb-c ports"
ARM: dts: imxrt1050: Fix clocks for mmc
ARM: imx_v6_v7_defconfig: enable SND_SOC_SPDIF
arm64: dts: imx95: correct the address length of netcmix_blk_ctrl
arm64: dts: imx8-ss-audio: add fallback compatible string fsl,imx6ull-esai for esai
arm64: dts: rockchip: rename rfkill label for Radxa ROCK 5B
arm64: dts: rockchip: add reset-names for combphy on rk3568
arm64: dts: qcom: sa8775p: Fix the size of 'addr_space' regions
|
|
Commit c814bf958926 ("powerpc/selftests: Use timersub() for
gettimeofday()"), got the order of arguments to timersub() wrong,
leading to a negative time delta being reported, eg:
test: gettimeofday
tags: git_version:v6.12-rc5-409-gdddf291c3030
time = -3.297781
success: gettimeofday
The correct order is minuend, subtrahend, which in this case is end,
start. Which gives:
test: gettimeofday
tags: git_version:v6.12-rc5-409-gdddf291c3030-dirty
time = 3.300650
success: gettimeofday
Fixes: c814bf958926 ("powerpc/selftests: Use timersub() for gettimeofday()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218114347.428108-1-mpe@ellerman.id.au
|
|
Use IS_ENABLED() for the device tree checks, so that more code is
checked by the compiler without having to build all the different
configurations.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218113159.422821-1-mpe@ellerman.id.au
|
|
Power Hypervisor can possibily allocate MMIO window intersecting with
Dynamic DMA Window (DDW) range, which is over 32-bit addressing.
These MMIO pages needs to be marked as reserved so that IOMMU doesn't map
DMA buffers in this range.
The current code is not marking these pages correctly which is resulting
in LPAR to OOPS while booting. The stack is at below
BUG: Unable to handle kernel data access on read at 0xc00800005cd40000
Faulting instruction address: 0xc00000000005cdac
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: af_packet rfkill ibmveth(X) lpfc(+) nvmet_fc nvmet nvme_keyring crct10dif_vpmsum nvme_fc nvme_fabrics nvme_core be2net(+) nvme_auth rtc_generic nfsd auth_rpcgss nfs_acl lockd grace sunrpc fuse configfs ip_tables x_tables xfs libcrc32c dm_service_time ibmvfc(X) scsi_transport_fc vmx_crypto gf128mul crc32c_vpmsum dm_mirror dm_region_hash dm_log dm_multipath dm_mod sd_mod scsi_dh_emc scsi_dh_rdac scsi_dh_alua t10_pi crc64_rocksoft_generic crc64_rocksoft sg crc64 scsi_mod
Supported: Yes, External
CPU: 8 PID: 241 Comm: kworker/8:1 Kdump: loaded Not tainted 6.4.0-150600.23.14-default #1 SLE15-SP6 b44ee71c81261b9e4bab5e0cde1f2ed891d5359b
Hardware name: IBM,9080-M9S POWER9 (raw) 0x4e2103 0xf000005 of:IBM,FW950.B0 (VH950_149) hv:phyp pSeries
Workqueue: events work_for_cpu_fn
NIP: c00000000005cdac LR: c00000000005e830 CTR: 0000000000000000
REGS: c00001400c9ff770 TRAP: 0300 Not tainted (6.4.0-150600.23.14-default)
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24228448 XER: 00000001
CFAR: c00000000005cdd4 DAR: c00800005cd40000 DSISR: 40000000 IRQMASK: 0
GPR00: c00000000005e830 c00001400c9ffa10 c000000001987d00 c00001400c4fe800
GPR04: 0000080000000000 0000000000000001 0000000004000000 0000000000800000
GPR08: 0000000004000000 0000000000000001 c00800005cd40000 ffffffffffffffff
GPR12: 0000000084228882 c00000000a4c4f00 0000000000000010 0000080000000000
GPR16: c00001400c4fe800 0000000004000000 0800000000000000 c00000006088b800
GPR20: c00001401a7be980 c00001400eff3800 c000000002a2da68 000000000000002b
GPR24: c0000000026793a8 c000000002679368 000000000000002a c0000000026793c8
GPR28: 000008007effffff 0000080000000000 0000000000800000 c00001400c4fe800
NIP [c00000000005cdac] iommu_table_reserve_pages+0xac/0x100
LR [c00000000005e830] iommu_init_table+0x80/0x1e0
Call Trace:
[c00001400c9ffa10] [c00000000005e810] iommu_init_table+0x60/0x1e0 (unreliable)
[c00001400c9ffa90] [c00000000010356c] iommu_bypass_supported_pSeriesLP+0x9cc/0xe40
[c00001400c9ffc30] [c00000000005c300] dma_iommu_dma_supported+0xf0/0x230
[c00001400c9ffcb0] [c00000000024b0c4] dma_supported+0x44/0x90
[c00001400c9ffcd0] [c00000000024b14c] dma_set_mask+0x3c/0x80
[c00001400c9ffd00] [c0080000555b715c] be_probe+0xc4/0xb90 [be2net]
[c00001400c9ffdc0] [c000000000986f3c] local_pci_probe+0x6c/0x110
[c00001400c9ffe40] [c000000000188f28] work_for_cpu_fn+0x38/0x60
[c00001400c9ffe70] [c00000000018e454] process_one_work+0x314/0x620
[c00001400c9fff10] [c00000000018f280] worker_thread+0x2b0/0x620
[c00001400c9fff90] [c00000000019bb18] kthread+0x148/0x150
[c00001400c9fffe0] [c00000000000ded8] start_kernel_thread+0x14/0x18
There are 2 issues in the code
1. The index is "int" while the address is "unsigned long". This results in
negative value when setting the bitmap.
2. The DMA offset is page shifted but the MMIO range is used as-is (64-bit
address). MMIO address needs to be page shifted as well.
Fixes: 3c33066a2190 ("powerpc/kernel/iommu: Add new iommu_table_in_use() helper")
Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241206210039.93172-1-gbatra@linux.ibm.com
|
|
Add a documentation file
(Documentation/nvme/nvme-pci-endpoint-target.rst) for the new NVMe PCI
endpoint target driver. This provides an overview of the driver
requirements, capabilities and limitations. A user guide describing how
to setup a NVMe PCI endpoint device using this driver is also provided.
This document is made accessible also from the PCI endpoint
documentation using a link. Furthermore, since the existing nvme
documentation was not accessible from the top documentation index, an
index file is added to Documentation/nvme and this index listed as
"NVMe Subsystem" in the "Storage interfaces" section of the subsystem
API index.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Implement a PCI target driver using the PCI endpoint framework. This
requires hardware with a PCI controller capable of executing in endpoint
mode.
The PCI endpoint framework is used to set up a PCI endpoint function
and its BAR compatible with a NVMe PCI controller. The framework is also
used to map local memory to the PCI address space to execute MMIO
accesses for retrieving NVMe commands from submission queues and posting
completion entries to completion queues. If supported, DMA is used for
command retreival and command data transfers, based on the PCI address
segments indicated by the command using either PRPs or SGLs.
The NVMe target driver relies on the NVMe target core code to execute
all commands isssued by the host. The PCI target driver is mainly
responsible for the following:
- Initialization and teardown of the endpoint device and its backend
PCI target controller. The PCI target controller is created using a
subsystem and a port defined through configfs. The port used must be
initialized with the "pci" transport type. The target controller is
allocated and initialized when the PCI endpoint is started by binding
it to the endpoint PCI device (nvmet_pci_epf_epc_init() function).
- Manage the endpoint controller state according to the PCI link state
and the actions of the host (e.g. checking the CC.EN register) and
propagate these actions to the PCI target controller. Polling of the
controller enable/disable is done using a delayed work scheduled
every 5ms (nvmet_pci_epf_poll_cc() function). This work is started
whenever the PCI link comes up (nvmet_pci_epf_link_up() notifier
function) and stopped when the PCI link comes down
(nvmet_pci_epf_link_down() notifier function).
nvmet_pci_epf_poll_cc() enables and disables the PCI controller using
the functions nvmet_pci_epf_enable_ctrl() and
nvmet_pci_epf_disable_ctrl(). The controller admin queue is created
using nvmet_pci_epf_create_cq(), which calls nvmet_cq_create(), and
nvmet_pci_epf_create_sq() which uses nvmet_sq_create().
nvmet_pci_epf_disable_ctrl() always resets the PCI controller to its
initial state so that nvmet_pci_epf_enable_ctrl() can be called
again. This ensures correct operation if, for instance, the host
reboots causing the PCI link to be temporarily down.
- Manage the controller admin and I/O submission queues using local
memory. Commands are obtained from submission queues using a work
item that constantly polls the doorbells of all submissions queues
(nvmet_pci_epf_poll_sqs() function). This work is started whenever
the controller is enabled (nvmet_pci_epf_enable_ctrl() function) and
stopped when the controller is disabled (nvmet_pci_epf_disable_ctrl()
function). When new commands are submitted by the host, DMA transfers
are used to retrieve the commands.
- Initiate the execution of all admin and I/O commands using the target
core code, by calling a requests execute() function. All commands are
individually handled using a per-command work item
(nvmet_pci_epf_iod_work() function). A command overall execution
includes: initializing a struct nvmet_req request for the command,
using nvmet_req_transfer_len() to get a command data transfer length,
parse the command PRPs or SGLs to get the PCI address segments of
the command data buffer, retrieve data from the host (if the command
is a write command), call req->execute() to execute the command and
transfer data to the host (for read commands).
- Handle the completions of commands as notified by the
->queue_response() operation of the PCI target controller
(nvmet_pci_epf_queue_response() function). Completed commands are
added to a list of completed command for their CQ. Each CQ list of
completed command is processed using a work item
(nvmet_pci_epf_cq_work() function) which posts entries for the
completed commands in the CQ memory and raise an IRQ to the host to
signal the completion. IRQ coalescing is supported as mandated by the
NVMe base specification for PCI controllers. Of note is that
completion entries are transmitted to the host using MMIO, after
mapping the completion queue memory to the host PCI address space.
Unlike for retrieving commands from SQs, DMA is not used as it
degrades performance due to the transfer serialization needed (which
delays completion entries transmission).
The configuration of a NVMe PCI endpoint controller is done using
configfs. First the NVMe PCI target controller configuration must be
done to set up a subsystem and a port with the "pci" addr_trtype
attribute. The subsystem can be setup using a file or block device
backed namespace or using a passthrough NVMe device. After this, the
PCI endpoint can be configured and bound to the PCI endpoint controller
to start the NVMe endpoint controller.
In order to not overcomplicate this initial implementation of an
endpoint PCI target controller driver, protection information is not
for now supported. If the PCI controller port and namespace are
configured with protection information support, an error will be
returned when the controller is created and initialized when the
endpoint function is started. Protection information support will be
added in a follow-up patch series.
Using a Rock5B board (Rockchip RK3588 SoC, PCI Gen3x4 endpoint
controller) with a target PCI controller setup with 4 I/O queues and a
null_blk block device as a namespace, the maximum performance using fio
was measured at 131 KIOPS for random 4K reads and up to 2.8 GB/S
throughput. Some data points are:
Rnd read, 4KB, QD=1, 1 job : IOPS=16.9k, BW=66.2MiB/s (69.4MB/s)
Rnd read, 4KB, QD=32, 1 job : IOPS=78.5k, BW=307MiB/s (322MB/s)
Rnd read, 4KB, QD=32, 4 jobs: IOPS=131k, BW=511MiB/s (536MB/s)
Seq read, 512KB, QD=32, 1 job : IOPS=5381, BW=2691MiB/s (2821MB/s)
The NVMe PCI endpoint target driver is not intended for production use.
It is a tool for learning NVMe, exploring existing features and testing
implementations of new NVMe features.
Co-developed-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
NVMe base specification v2.1 mandates support for the arbitration
feature (NVME_FEAT_ARBITRATION). Introduce the data structure
struct nvmet_feat_arbitration to define the high, medium and low
priority weight fields and the arbitration burst field of this feature
and implement the functions nvmet_get_feat_arbitration() and
nvmet_set_feat_arbitration() functions to get and set these fields.
Since there is no generic way to implement support for the arbitration
feature, these functions respectively use the controller get_feature()
and set_feature() operations to process the feature with the help of
the controller driver. If the controller driver does not implement these
operations and a get feature command or a set feature command for this
feature is received, the command is failed with an invalid field error.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The NVMe base specifications v2.1 mandate supporting the interrupt
config feature (NVME_FEAT_IRQ_CONFIG) for PCI controllers. Introduce the
data structure struct nvmet_feat_irq_config to define the coalescing
disabled (cd) and interrupt vector (iv) fields of this feature and
implement the functions nvmet_get_feat_irq_config() and
nvmet_set_feat_irq_config() functions to get and set these fields. These
functions respectively use the controller get_feature() and
set_feature() operations to fill and handle the fields of struct
nvmet_feat_irq_config.
Support for this feature is prohibited for fabrics controllers. If a get
feature command or a set feature command for this feature is received
for a fabrics controller, the command is failed with an invalid field
error.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The NVMe base specifications v2.1 mandate Supporting the interrupt
coalescing feature (NVME_FEAT_IRQ_COALESCE) for PCI controllers.
Introduce the data structure struct nvmet_feat_irq_coalesce to define
the time and threshold (thr) fields of this feature and implement the
functions nvmet_get_feat_irq_coalesce() and
nvmet_set_feat_irq_coalesce() to get and set this feature. These
functions respectively use the controller get_feature() and
set_feature() operations to fill and handle the fields of struct
nvmet_feat_irq_coalesce.
While the Linux kernel nvme driver does not use this feature and thus
will not complain if it is not implemented, other major OSes fail
initializing the NVMe device if this feature support is missing.
Support for this feature is prohibited for fabrics controllers. If a get
feature or set feature command for this feature is received for a
fabrics controller, the command is failed with an invalid field error.
Suggested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The NVMe specifications mandate support for the host identifier
set_features for controllers that also supports reservations. Satisfy
this requirement by implementing handling of the NVME_FEAT_HOST_ID
feature for the nvme_set_features command. This implementation is for
now effective only for PCI target controllers. For other controller
types, the set features command is failed with a NVME_SC_CMD_SEQ_ERROR
status as before.
As noted in the code, 128 bits host identifiers are supported since the
NVMe base specifications version 2.1 indicate in section 5.1.25.1.28.1
that "The controller may support a 64-bit Host Identifier...".
The RHII (Reservations and Host Identifier Interaction) bit of the
controller attribute (ctratt) field of the identify controller data is
also set to indicate that a host ID of "0" is supported but that the
host ID must be a non-zero value to use reservations.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The implementation of some features cannot always be done generically by
the target core code. Arbitraion and IRQ coalescing features are
examples of such features: their implementation must be provided (at
least partially) by the target controller driver.
Introduce the set_feature() and get_feature() controller fabrics
operations (in struct nvmet_fabrics_ops) to allow supporting such
features.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Support for SGL is optional for the PCI transport. Modify
nvmet_req_init() to not require the NVME_CMD_SGL_METABUF command flag to
be set if the target controller transport type is NVMF_TRTYPE_PCI.
In addition to this, the NVMe base specification v2.1 mandate that all
admin commands use PRP, that is, have CDW0.PSDT cleared to 0. Modify
nvmet_parse_admin_cmd() to check this.
Finally, modify nvmet_check_transfer_len() and
nvmet_check_data_len_lte() to return the appropriate error status
depending on the command using SGL or PRP. Since for fabrics
nvmet_req_init() checks that a command uses SGL, always, this change
affects only PCI target controllers.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The I/O submission queue management admin commands
(nvme_admin_delete_sq, nvme_admin_create_sq, nvme_admin_delete_cq,
and nvme_admin_create_cq) are mandatory admin commands for I/O
controllers using the PCI transport, that is, support for these commands
is mandatory for a a PCI target I/O controller.
Implement support for these commands by adding the functions
nvmet_execute_delete_sq(), nvmet_execute_create_sq(),
nvmet_execute_delete_cq() and nvmet_execute_create_cq() to set as the
execute method of requests for these commands. These functions will
return an invalid opcode error for any controller that is not a PCI
target controller. Support for the I/O queue management commands is also
reported in the command effect log of PCI target controllers (using
nvmet_get_cmd_effects_admin()).
Each management command is backed by a controller fabric operation
that can be defined by a PCI target controller driver to setup I/O
queues using nvmet_sq_create() and nvmet_cq_create() or delete I/O
queues using nvmet_sq_destroy().
As noted in a comment in nvmet_execute_create_sq(), we do not yet
support sharing a single CQ between multiple SQs.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Introduce the new functions nvmet_sq_create() and nvmet_cq_create() to
allow a target driver to initialize and setup admin and IO queues
directly, without needing to execute connect fabrics commands.
The helper functions nvmet_check_cqid() and nvmet_check_sqid() are
implemented to check the correctness of SQ and CQ IDs when
nvmet_sq_create() and nvmet_cq_create() are called.
nvmet_sq_create() and nvmet_cq_create() are primarily intended for use
with PCI target controller drivers and thus are not well integrated
with the current queue creation of fabrics controllers using the connect
command. These fabrices drivers are not modified to use these functions.
This simple implementation of SQ and CQ management for PCI target
controller drivers does not allow multiple SQs to share the same CQ,
similarly to other fabrics transports. This is a specification
violation. A more involved set of changes will follow to add support for
this required completion queue sharing feature.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add the new function nvmet_req_transfer_len() to parse a request command
to extract the transfer length of the command. This function
implementation relies on multiple helper functions for parsing I/O
commands (nvmet_io_cmd_transfer_len()), admin commands
(nvmet_admin_cmd_data_len()) and fabrics connect commands
(nvmet_connect_cmd_data_len).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Introduce struct nvmet_alloc_ctrl_args to define the arguments for
the function nvmet_alloc_ctrl() to avoid the need for passing a pointer
to a struct nvmet_req as an argument. This new data structure aggregates
together the arguments that were passed to nvmet_alloc_ctrl()
(subsysnqn, hostnqn and kato), together with the struct nvmet_req fields
used by nvmet_alloc_ctrl(), that is, the fields port, p2p_client, and
ops as input and the result and error_loc fields as output, as well as a
status field. nvmet_alloc_ctrl() is also changed to return a pointer
to the allocated and initialized controller structure instead of a
status code, as the status is now returned through the status field of
struct nvmet_alloc_ctrl_args.
The function nvmet_setup_p2p_ns_map() is changed to not take a pointer
to a struct nvmet_req as argument, instead, directly specify the
p2p_client device pointer needed as argument.
The code in nvmet_execute_admin_connect() that initializes a new target
controller after allocating it is moved into nvmet_alloc_ctrl().
The code that sets up an admin queue for the controller (and the call
to nvmet_install_queue()) remains in nvmet_execute_admin_connect().
Finally, nvmet_alloc_ctrl() is also exported to allow target drivers to
use this function directly to allocate and initialize a new controller
structure without the need to rely on a fabrics connect command request.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Define the transport type NVMF_TRTYPE_PCI for PCI endpoint targets.
This transport type is defined using the value 0 which is reserved in
the NVMe base specifications v2.1 (Figure 294). Given that struct
nvmet_port are zeroed out on creation, to avoid having this transsport
type becoming the new default, nvmet_referral_make() and
nvmet_ports_make() are modified to initialize a port discovery address
transport type field (disc_addr.trtype) to NVMF_TRTYPE_MAX.
Any port using this transport type is also skipped and not reported in
the discovery log page (nvmet_execute_disc_get_log_page()).
The helper function nvmet_is_pci_ctrl() is also introduced to check if
a target controller uses the PCI transport.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Allow a target driver to attach private data to a target controller by
adding the new field drvdata to struct nvmet_ctrl.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In order to have a logically better organized implementation of the
effects log page, split out reporting the supported admin commands from
nvmet_get_cmd_effects_nvm() into the new function
nvmet_get_cmd_effects_admin().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Make the function nvmet_update_cc() available to target drivers by
exporting it. To also facilitate the manipulation of the cc register
bits, move the inline helper functions nvmet_cc_en(), nvmet_cc_css(),
nvmet_cc_mps(), nvmet_cc_ams(), nvmet_cc_shn(), nvmet_cc_iosqes(), and
nvmet_cc_iocqes() from core.c to nvmet.h so that these functions can be
reused in target controller drivers.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Define the new vendor_id and subsys_vendor_id configfs attribute for
target subsystems. These attributes are respectively reported as the
vid field and as the ssvid field of the identify controller data of
a target controllers using the subsystem for which these attributes
are set.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Move the declaration of all helper functions converting NVMe command
opcodes and status codes into strings from drivers/nvme/host/nvme.h
into include/linux/nvme.h, together with the commands definitions.
This allows NVMe target drivers to call these functions without having
to include a host header file.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The nvme_poll_cq() function currently returns the number of CQEs
found, However, only one caller, nvme_poll(), requires a boolean
value to check whether any CQE was completed. The other callers do
not use the return value at all.
To better reflect its usage, update the return type of nvme_poll_cq()
from int to bool.
Signed-off-by: Yongsoo Joo <ysjoo@kookmin.ac.kr>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The xa_store() may fail due to memory allocation failure because there
is no guarantee that the index csi is already used. This fix adds an
error check of the return value of xa_store() in nvme_get_effects_log().
Fixes: 1cf7a12e09aa ("nvme: use an xarray to lookup the Commands Supported and Effects log")
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Since day-1 we are assigning the queue io_cpu very naively. We always
base the queue id (controller scope) and assign it its matching cpu
from the online mask. This works fine when the number of queues match
the number of cpu cores.
The problem starts when we have less queues than cpu cores. First, we
should take into account the mq_map and select a cpu within the cpus
that are assigned to this queue by the mq_map in order to minimize cross
numa cpu bouncing.
Second, even worse is that we don't take into account multiple
controllers may have assigned queues to a given cpu. As a result we may
simply compund more and more queues on the same set of cpus, which is
suboptimal.
We fix this by introducing global per-cpu counters that tracks the
number of queues assigned to each cpu, and we select the least used cpu
based on the mq_map and the per-cpu counters, and assign it as the queue
io_cpu.
The behavior for a single controller is slightly optimized by selecting
better cpu candidates by consulting with the mq_map, and multiple
controllers are spreading queues among cpu cores much better, resulting
in lower average cpu load, and less likelihood to hit hotspots.
Note that the accounting is not 100% perfect, but we don't need to be,
we're simply putting our best effort to select the best candidate cpu
core that we find at any given point.
Another byproduct is that every controller reset/reconnect may change
the queues io_cpu mapping, based on the current LRU accounting scheme.
Here is the baseline queue io_cpu assignment for 4 controllers, 2 queues
per controller, and 4 cpus on the host:
nvme1: queue 0: using cpu 0
nvme1: queue 1: using cpu 1
nvme2: queue 0: using cpu 0
nvme2: queue 1: using cpu 1
nvme3: queue 0: using cpu 0
nvme3: queue 1: using cpu 1
nvme4: queue 0: using cpu 0
nvme4: queue 1: using cpu 1
And this is the fixed io_cpu assignment:
nvme1: queue 0: using cpu 0
nvme1: queue 1: using cpu 2
nvme2: queue 0: using cpu 1
nvme2: queue 1: using cpu 3
nvme3: queue 0: using cpu 0
nvme3: queue 1: using cpu 2
nvme4: queue 0: using cpu 1
nvme4: queue 1: using cpu 3
Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Suggested-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[fixed kbuild reported errors]
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Commit in a fixes tag attempted to fix the issue in the following
sequence of calls:
do_output
-> ovs_vport_send
-> dev_queue_xmit
-> __dev_queue_xmit
-> netdev_core_pick_tx
-> skb_tx_hash
When device is unregistering, the 'dev->real_num_tx_queues' goes to
zero and the 'while (unlikely(hash >= qcount))' loop inside the
'skb_tx_hash' becomes infinite, locking up the core forever.
But unfortunately, checking just the carrier status is not enough to
fix the issue, because some devices may still be in unregistering
state while reporting carrier status OK.
One example of such device is a net/dummy. It sets carrier ON
on start, but it doesn't implement .ndo_stop to set the carrier off.
And it makes sense, because dummy doesn't really have a carrier.
Therefore, while this device is unregistering, it's still easy to hit
the infinite loop in the skb_tx_hash() from the OVS datapath. There
might be other drivers that do the same, but dummy by itself is
important for the OVS ecosystem, because it is frequently used as a
packet sink for tcpdump while debugging OVS deployments. And when the
issue is hit, the only way to recover is to reboot.
Fix that by also checking if the device is running. The running
state is handled by the net core during unregistering, so it covers
unregistering case better, and we don't really need to send packets
to devices that are not running anyway.
While only checking the running state might be enough, the carrier
check is preserved. The running and the carrier states seem disjoined
throughout the code and different drivers. And other core functions
like __dev_direct_xmit() check both before attempting to transmit
a packet. So, it seems safer to check both flags in OVS as well.
Fixes: 066b86787fa3 ("net: openvswitch: fix race on port output")
Reported-by: Friedrich Weber <f.weber@proxmox.com>
Closes: https://mail.openvswitch.org/pipermail/ovs-discuss/2025-January/053423.html
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Tested-by: Friedrich Weber <f.weber@proxmox.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250109122225.4034688-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
