| Age | Commit message (Collapse) | Author |
|---|
|
The bnxt_queue_{start | stop}() access vnic_info as much as allocated,
which indicates bp->nr_vnics.
So, it should not reach bp->vnic_info[bp->nr_vnics].
Fixes: 661958552eda ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250316025837.939527-1-ap420073@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Lei Chen reported a bug with CLOCK_MONOTONIC_COARSE having inconsistencies
when NTP is adjusting the clock frequency.
This has gone seemingly undetected for ~15 years, illustrating a clear gap
in our testing.
The skew_consistency test is intended to catch this sort of problem, but
was focused on only evaluating CLOCK_MONOTONIC, and thus missed the problem
on CLOCK_MONOTONIC_COARSE.
So adjust the test to run with all clockids for 60 seconds each instead of
10 minutes with just CLOCK_MONOTONIC.
Reported-by: Lei Chen <lei.chen@smartx.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250320200306.1712599-2-jstultz@google.com
Closes: https://lore.kernel.org/lkml/20250310030004.3705801-1-lei.chen@smartx.com/
|
|
Lei Chen raised an issue with CLOCK_MONOTONIC_COARSE seeing time
inconsistencies.
Lei tracked down that this was being caused by the adjustment
tk->tkr_mono.xtime_nsec -= offset;
which is made to compensate for the unaccumulated cycles in offset when the
multiplicator is adjusted forward, so that the non-_COARSE clockids don't
see inconsistencies.
However, the _COARSE clockid getter functions use the adjusted xtime_nsec
value directly and do not compensate the negative offset via the
clocksource delta multiplied with the new multiplicator. In that case the
caller can observe time going backwards in consecutive calls.
By design, this negative adjustment should be fine, because the logic run
from timekeeping_adjust() is done after it accumulated approximately
multiplicator * interval_cycles
into xtime_nsec. The accumulated value is always larger then the
mult_adj * offset
value, which is subtracted from xtime_nsec. Both operations are done
together under the tk_core.lock, so the net change to xtime_nsec is always
always be positive.
However, do_adjtimex() calls into timekeeping_advance() as well, to to
apply the NTP frequency adjustment immediately. In this case,
timekeeping_advance() does not return early when the offset is smaller then
interval_cycles. In that case there is no time accumulated into
xtime_nsec. But the subsequent call into timekeeping_adjust(), which
modifies the multiplicator, subtracts from xtime_nsec to correct
for the new multiplicator.
Here because there was no accumulation, xtime_nsec becomes smaller than
before, which opens a window up to the next accumulation, where the _COARSE
clockid getters, which don't compensate for the offset, can observe the
inconsistency.
To fix this, rework the timekeeping_advance() logic so that when invoked
from do_adjtimex(), the time is immediately forwarded to accumulate also
the sub-interval portion into xtime. That means the remaining offset
becomes zero and the subsequent multiplier adjustment therefore does not
modify xtime_nsec.
There is another related inconsistency. If xtime is forwarded due to the
instantaneous multiplier adjustment, the NTP error, which was accumulated
with the previous setting, becomes meaningless.
Therefore clear the NTP error as well, after forwarding the clock for the
instantaneous multiplier update.
Fixes: da15cfdae033 ("time: Introduce CLOCK_REALTIME_COARSE")
Reported-by: Lei Chen <lei.chen@smartx.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250320200306.1712599-1-jstultz@google.com
Closes: https://lore.kernel.org/lkml/20250310030004.3705801-1-lei.chen@smartx.com/
|
|
When adding a socket option support in MPTCP, both the get and set parts
are supposed to be implemented.
IP(V6)_FREEBIND and IP(V6)_TRANSPARENT support for the setsockopt part
has been added a while ago, but it looks like the get part got
forgotten. It should have been present as a way to verify a setting has
been set as expected, and not to act differently from TCP or any other
socket types.
Everything was in place to expose it, just the last step was missing.
Only new code is added to cover these specific getsockopt(), that seems
safe.
Fixes: c9406a23c116 ("mptcp: sockopt: add SOL_IP freebind & transparent options")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-net-mptcp-fix-data-stream-corr-sockopt-v1-3-122dbb249db3@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When adding a socket option support in MPTCP, both the get and set parts
are supposed to be implemented.
IPV6_V6ONLY support for the setsockopt part has been added a while ago,
but it looks like the get part got forgotten. It should have been
present as a way to verify a setting has been set as expected, and not
to act differently from TCP or any other socket types.
Not supporting this getsockopt(IPV6_V6ONLY) blocks some apps which want
to check the default value, before doing extra actions. On Linux, the
default value is 0, but this can be changed with the net.ipv6.bindv6only
sysctl knob. On Windows, it is set to 1 by default. So supporting the
get part, like for all other socket options, is important.
Everything was in place to expose it, just the last step was missing.
Only new code is added to cover this specific getsockopt(), that seems
safe.
Fixes: c9b95a135987 ("mptcp: support IPV6_V6ONLY setsockopt")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/550
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-net-mptcp-fix-data-stream-corr-sockopt-v1-2-122dbb249db3@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Breno Leitao says:
====================
netconsole: Add support for userdata release
I am submitting a series of patches that introduce a new feature for the
netconsole subsystem, specifically the addition of the 'release' field
to the sysdata structure. This feature allows the kernel release/version
to be appended to the userdata dictionary in every message sent,
enhancing the information available for debugging and monitoring
purposes.
This complements the already supported release prepend feature, which
was added some time ago. The release prepend appends the release
information at the message header, which is not ideal for two reasons:
1) It is difficult to determine if a message includes this information,
making it hard and resource-intensive to parse.
2) When a message is fragmented, the release information is appended to
every message fragment, consuming valuable space in the packet.
The "release prepend" feature was created before the concept of userdata
and sysdata. Now that this format has proven successful, we are
implementing the release feature as part of this enhanced structure.
This patch series aims to improve the netconsole subsystem by providing
a more efficient and user-friendly way to include kernel release
information in messages. I believe these changes will significantly aid
in system analysis and troubleshooting.
Suggested-by: Manu Bretelle <chantr4@gmail.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
====================
Link: https://patch.msgid.link/20250314-netcons_release-v1-0-07979c4b86af@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add documentation explaining the kernel release auto-population feature
in netconsole.
This feature appends kernel version information to the userdata
dictionary in every message sent when enabled via the `release_enabled`
file in the configfs hierarchy.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-netcons_release-v1-6-07979c4b86af@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Expands the self-tests to include the 'release' feature in
sysdata.
Verifies that enabling the 'release' feature appends the
correct data and ensures that disabling it functions as expected.
When enabled, the message should have an item similar to in the
userdata: `release=$(uname -r)`
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-netcons_release-v1-5-07979c4b86af@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Append the init_utsname()->release to sysdata buffer before sending the
message in case the feature is set.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-netcons_release-v1-4-07979c4b86af@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This commit appends a common "sysdata" suffix to functions responsible
for appending data to sysdata.
This change enhances code clarity and prevents naming conflicts with
other "append" functions, particularly in anticipation of the upcoming
inclusion of the `release` field in the next patch.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-netcons_release-v1-3-07979c4b86af@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Implement the configfs helpers to show and set release_enabled configfs
directories under userdata.
When enabled, set the feature bit in netconsole_target->sysdata_fields.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-netcons_release-v1-2-07979c4b86af@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This commit adds a new feature to the sysdata structure, allowing the
kernel release/version to be appended as part of sysdata. Additionally,
it updates the logic to count this new field as a used entry when
enabled.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-netcons_release-v1-1-07979c4b86af@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The #if check causes a build failure when CONFIG_DEBUG_FS is turned
off:
In file included from drivers/net/ethernet/airoha/airoha_eth.c:17:
drivers/net/ethernet/airoha/airoha_eth.h:543:5: error: "CONFIG_DEBUG_FS" is not defined, evaluates to 0 [-Werror=undef]
543 | #if CONFIG_DEBUG_FS
| ^~~~~~~~~~~~~~~
Replace it with the correct #ifdef.
Fixes: 3fe15c640f38 ("net: airoha: Introduce PPE debugfs support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250314155009.4114308-1-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull io_uring fix from Jens Axboe:
"Single fix heading to stable, fixing an issue with io_req_msg_cleanup()
sometimes too eagerly clearing cleanup flags"
* tag 'io_uring-6.14-20250321' of git://git.kernel.dk/linux:
io_uring/net: don't clear REQ_F_NEED_CLEANUP unconditionally
|
|
The infamous mmap_lock taken in copy_from/to_user() can be often
problematic when it's called inside another mutex, as they might lead
to deadlocks.
In the case of ALSA timer code, the bad pattern is with
guard(mutex)(®ister_mutex) that covers copy_from/to_user() -- which
was mistakenly introduced at converting to guard(), and it had been
carefully worked around in the past.
This patch fixes those pieces simply by moving copy_from/to_user() out
of the register mutex lock again.
Fixes: 3923de04c817 ("ALSA: pcm: oss: Use guard() for setup")
Reported-by: syzbot+2b96f44164236dda0f3b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/67dd86c8.050a0220.25ae54.0059.GAE@google.com
Link: https://patch.msgid.link/20250321172653.14310-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Roopa has decided to withdraw as a bridge maintainer and Ido has agreed to
step up and co-maintain the bridge with me. He has been very helpful in
bridge patch reviews and has contributed a lot to the bridge over the
years. Add an entry for Roopa to CREDITS and also add bridge's headers
to its MAINTAINERS entry.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314100631.40999-1-razor@blackwall.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The void * cast in mctp_cb is unnecessary as it's already been done
at the start of the function.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/Z9PwOQeBSYlgZlHq@gondor.apana.org.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
pcie_bwctrl_select_speed() should take __fls() of the speed bit, not return
it as a raw value. Instead of directly returning 2.5GT/s speed bit, simply
assign the fallback speed (2.5GT/s) into supported_speeds variable to share
the normal return path that calls pcie_supported_speeds2target_speed() to
calculate __fls().
This code path is not very likely to execute because
pcie_get_supported_speeds() should provide valid ->supported_speeds but a
spec violating device could fail to synthesize any speed in
pcie_get_supported_speeds(). It could also happen in case the
supported_speeds intersection is empty (also a violation of the current
PCIe specs).
Link: https://lore.kernel.org/r/20250321163103.5145-1-ilpo.jarvinen@linux.intel.com
Fixes: de9a6c8d5dbf ("PCI/bwctrl: Add pcie_set_target_speed() to set PCIe Link Speed")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Heiner Kallweit says:
====================
net: phy: remove calls to devm_hwmon_sanitize_name
Since c909e68f8127 ("hwmon: (core) Use device name as a fallback in
devm_hwmon_device_register_with_info") we can simply provide NULL
as name argument.
====================
Link: https://patch.msgid.link/198f3cd0-6c39-4783-afe7-95576a4b8539@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since c909e68f8127 ("hwmon: (core) Use device name as a fallback in
devm_hwmon_device_register_with_info") we can simply provide NULL
as name argument.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/59c485e4-983c-42f6-9114-916703a62e3f@gmail.com
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since c909e68f8127 ("hwmon: (core) Use device name as a fallback in
devm_hwmon_device_register_with_info") we can simply provide NULL
as name argument.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/e34c4802-20ce-4556-a47c-812e602e8526@gmail.com
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since c909e68f8127 ("hwmon: (core) Use device name as a fallback in
devm_hwmon_device_register_with_info") we can simply provide NULL
as name argument.
Note that neither priv->hwmon_name nor priv->hwmon_dev are used
outside tja11xx_hwmon_register.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/4452cb7e-1a2f-4213-b49f-9de196be9204@gmail.com
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since c909e68f8127 ("hwmon: (core) Use device name as a fallback in
devm_hwmon_device_register_with_info") we can simply provide NULL
as name argument.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/6e8d26f4-8d0a-4c83-aec3-378847a377eb@gmail.com
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If the client should see an ENETDOWN when trying to connect to the data
server, it might still be able to talk to the metadata server through
another NIC. If so, report the error.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Propagate the NFS_MOUNT_NETUNREACH_FATAL flag to work with the pNFS
flexfiles client. In these circumstances, the client needs to treat the
ENETDOWN and ENETUNREACH errors as fatal, and should abandon the
attempted I/O.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Propagate the NFS_MOUNT_NETUNREACH_FATAL flag to work with the generic
NFS client. If the flag is set, the client will receive ENETDOWN and
ENETUNREACH errors from the RPC layer, and is expected to treat them as
being fatal.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If the NFS client was initially created in a container, and that
container is torn down, there is usually no possibity to go back and
destroy any NFS clients that are hung because their virtual network
devices have been unlinked.
Add a flag that tells the NFS client that in these circumstances, it
should treat ENETDOWN and ENETUNREACH errors as fatal to the NFS client.
The option defaults to being on when the mount happens from inside a net
namespace that is not "init_net".
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
|
|
PCIe hotplug can operate in poll mode without interrupt handlers using a
polling kthread only. eb34da60edee ("PCI: pciehp: Disable hotplug
interrupt during suspend") failed to consider that and enables HPIE
(Hot-Plug Interrupt Enable) unconditionally when resuming the Port.
Only set HPIE if non-poll mode is in use. This makes
pcie_enable_interrupt() match how pcie_enable_notification() already
handles HPIE.
Link: https://lore.kernel.org/r/20250321162114.3939-1-ilpo.jarvinen@linux.intel.com
Fixes: eb34da60edee ("PCI: pciehp: Disable hotplug interrupt during suspend")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
|
|
Certain IP blocks may strictly require/expect a nE mapping to function
correctly, while others may be fine without it (which is preferred for
performance reasons).
Allow specifying nonposted-mmio on a per-device basis.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250319-topic-nonposted_mmio-v1-2-dfb886fbd15f@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The nE memory attribute may be utilized by various implementations,
not limited to Apple Silicon platforms.
Drop the early CONFIG_ARCH_APPLE check.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250319-topic-nonposted_mmio-v1-1-dfb886fbd15f@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Ordering of the individual properties inside each property group benefits
from applying natural sort order [1] by the property names, because it
results in more logical and more usable property lists, similarly to what's
already the case with the alpha-numerical ordering of the nodes without
unit addresses.
Let's have this clearly specified in the DTS coding style, and let's expand
the provided node example a bit, to actually show the results of applying
natural sort order.
Applying strict alpha-numerical ordering can result in property lists that
are suboptimal from the usability standpoint. For the provided example,
which stems from a real-world DT, [2][3][4] applying strict alpha-numerical
ordering produces the following undesirable result:
vdd-0v9-supply = <&board_vreg1>;
vdd-12v-supply = <&board_vreg3>;
vdd-1v8-supply = <&board_vreg4>;
vdd-3v3-supply = <&board_vreg2>;
Having the properties sorted in natural order by their associated voltages
is more logical, more usable, and a bit more consistent.
[1] https://en.wikipedia.org/wiki/Natural_sort_order
[2] https://lore.kernel.org/linux-rockchip/b39cfd7490d8194f053bf3971f13a43472d1769e.1740941097.git.dsimic@manjaro.org/
[3] https://lore.kernel.org/linux-rockchip/174104113599.8946.16805724674396090918.b4-ty@sntech.de/
[4] https://lore.kernel.org/linux-rockchip/757afa87255212dfa5abf4c0e31deb08@manjaro.org/
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/6468619098f94d8acb00de0431c414c5fcfbbdbf.1742532899.git.dsimic@manjaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Update feature list for smu_v13_0_6 to show vcn & smu deep
sleep feature enable status
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The 'flags' parameter, which specifies memory allocation behavior while
creating a sync entry,
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c:162: warning: Function parameter or struct member 'flags' not described in 'amdgpu_sync_fence'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On chips without native IP discovery support, use the fw binary
if available, otherwise we can continue without it.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Flora Cui <flora.cui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
vega10/vega12/vega20/raven/raven2/picasso/arcturus/aldebaran
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Few of the metrics data for smu_v13_0_12 has not been reported
in Q10 format, remove UQ10 to UINT conversion for those
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Few of the metrics data for smu_v13_0_6 has not been reported
in Q10 format, remove UQ10 to UINT conversion for those
v2: Move smu_v13_0_12 changes to separate patch(Kevin)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit updates the VM flush implementation for the SDMA engine.
- Added a new function `sdma_v4_4_2_get_invalidate_req` to construct the VM_INVALIDATE_ENG0_REQ
register value for the specified VMID and flush type. This function ensures that all relevant
page table cache levels (L1 PTEs, L2 PTEs, and L2 PDEs) are invalidated.
- Modified the `sdma_v4_4_2_ring_emit_vm_flush` function to use the new `sdma_v4_4_2_get_invalidate_req`
function. The updated function emits the necessary register writes and waits to perform a VM flush
for the specified VMID. It updates the PTB address registers and issues a VM invalidation request
using the specified VM invalidation engine.
- Included the necessary header file `gc/gc_9_0_sh_mask.h` to provide access to the required register
definitions.
v2: vm flush by the vm inalidation packet (Lijo)
v3: code stle and define thh macro for the vm invalidation packet (Christian)
v4: Format definition sdma vm invalidate packet (Lijo)
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
TLB flush
- Modify the VM invalidation engine allocation logic to handle SDMA page rings.
SDMA page rings now share the VM invalidation engine with SDMA gfx rings instead of
allocating a separate engine. This change ensures efficient resource management and
avoids the issue of insufficient VM invalidation engines.
- Add synchronization for GPU TLB flush operations in gmc_v9_0.c.
Use spin_lock and spin_unlock to ensure thread safety and prevent race conditions
during TLB flush operations. This improves the stability and reliability of the driver,
especially in multi-threaded environments.
v2: replace the sdma ring check with a function `amdgpu_sdma_is_page_queue`
to check if a ring is an SDMA page queue.(Lijo)
v3: Add GC version check, only enabled on GC9.4.3/9.4.4/9.5.0
v4: Fix code style and add more detailed description (Christian)
v5: Remove dependency on vm_inv_eng loop order, explicitly lookup shared inv_eng(Christian/Lijo)
v6: Added search shared ring function amdgpu_sdma_get_shared_ring (Lijo)
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Increase the maximum number of rings supported by the AMDGPU driver from 133 to 149.
This change is necessary to enable support for the SDMA page ring.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In the case of injecting uncorrected error with background workload,
the deferred error among uncorrected errors need to be specified
by checking the deferred and poison bits of status register.
v2: refine checking for deferred error
v2: log possiable DEs among CEs
v2: generate CPER records for DEs among UEs
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable the cleaner shader for GFX11.5.0/11.5.1 GPUs to provide data
isolation between GPU workloads. The cleaner shader is responsible for
clearing the Local Data Store (LDS), Vector General Purpose Registers
(VGPRs), and Scalar General Purpose Registers (SGPRs), which helps
prevent data leakage and ensures accurate computation results.
This update extends cleaner shader support to GFX11.5.0/11.5.1 GPUs,
previously available for GFX11.0.3. It enhances security by clearing GPU
memory between processes and maintains a consistent GPU state across KGD
and KFD workloads.
Cc: Mario Sopena-Novales <mario.novales@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Follow the same logic as the other IP types.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable pipes on both MECs for MES.
Fixes: 745f46b6a99f ("drm/amdgpu: enable mes v12 self test")
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Leftover from MES bring up. There is no production
MES support for MES 10.x. The rest of the MES 10.x
code has already been removed so drop this.
Acked-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Break when we get to the end of the supported pipes
rather than continuing the loop.
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The gfx and page queues are per instance, so track them
per instance.
v2: drop extra parameter (Lijo)
Fixes: fdbfaaaae06b ("drm/amdgpu: Improve SDMA reset logic with guilty queue tracking")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move the kfd suspend/resume code into the caller. That
is where the KFD is likely to detect a reset so on the KFD
side there is no need to call them. Also add a mutex to
lock the actual reset sequence.
v2: make the locking per instance
Fixes: bac38ca8c475 ("drm/amdkfd: implement per queue sdma reset for gfx 9.4+")
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
I can't count how often I had to remove this nonsense.
Probably doesn't need an explanation any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
