Age | Commit message (Collapse) | Author |
|
This sensors are currently controlled from userspace, ideally
we will add full drivers in the future.
Signed-off-by: Heiko Schocher <hs@denx.de>
Link: https://patch.msgid.link/20250719063355.73111-3-hs@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add documentation for spi based ABB sensors, which are
currently operated from userspace.
Signed-off-by: Heiko Schocher <hs@denx.de>
Link: https://patch.msgid.link/20250719063355.73111-2-hs@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The glitch was detected in the high frequency of the HP playback.
This patch adjusts the DAC dither setting to avoid this situation
for almost all cases.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://patch.msgid.link/20250721034728.1396238-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the missing op in the device description to avoid issues with jack
detection.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250721063039.2234279-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update the MAINTAINERS file to reflect the following changes for two Intel
platform drivers:
- Tony has agreed to take over maintainership of the Intel In-Field Scan
(IFS) driver, and is now listed as the new maintainer.
- Remove myself as the maintainer for the Slim BootLoader (SBL) firmware
update driver and mark it as Orphan. To the best of my knowledge, there
is no one familiar with SBL who can take over this role.
These changes are being made as I will soon be leaving Intel.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20250714164643.3879784-1-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
For the sake of consistency, use my kernel.org address in all Contact
records in sysfs-bus-acpi and in the MAINTAINERS records related to
ACPI and PNP.
Signed-off-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://patch.msgid.link/2796086.mvXUDI8C0e@rjwysocki.net
|
|
For the sake of consistency, use my kernel.org address in all Contact
records in sysfs-devices-power and sysfs-power, and in the power-domain
DT binding.
Signed-off-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://patch.msgid.link/5911353.DvuYhMxLoT@rjwysocki.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Merge devfreq updates for v6.17 from Chanwoo Choi:
"- Clean devfreq core and fix bugs
: Replace sscanf with kstrtoul
: Remove redundant devfreq_get_freq_range() on adding devfreq driver
: Check missing NULL pointer check on removing devfreq driver
: Limit max_freq and min_freq to avoid unreachable value
: Fix wrong index on trans_stat sysfs node
- Use devm_* managed function for clock control on sun81-a33-mbus driver
- Add HiSilicon uncore frequencye scaling driver for for HiSilicon Kunpeng SoCs
: The uncore domain includes shared system resources such as interconnects
and L3 cache, and its frequency has a significant impact on system performance
and power consumption. The driver provides the following functions:
- Support to scale frequency scaling with governor and user setting
- Support to query CPUs whose performance is closely related to the uncore domain
- Communication with the platform controller via an ACPI PCC mailbox
to perform actual frequency changes"
* tag 'devfreq-next-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: Add HiSilicon uncore frequency scaling driver
PM / devfreq: Allow devfreq driver to add custom sysfs ABIs
PM / devfreq: sun8i-a33-mbus: Simplify by using more devm functions
PM / devfreq: Fix a index typo in trans_stat
PM / devfreq: Check governor before using governor->name
PM / devfreq: Remove redundant devfreq_get_freq_range() calling in devfreq_add_device()
PM / devfreq: Limit max_freq with scaling_min_freq
PM / devfreq: governor: Replace sscanf() with kstrtoul() in set_freq_store()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge an operating performance points (OPP) update for 6.17 from Viresh
Kumar:
"- Minor cleanup in Rust bindings (Abhinav Ananthu)."
* tag 'opp-updates-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
rust: opp: use c_* types via kernel prelude
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge CPUFreq updates for 6.17 from Viresh Kumar:
"- tegra124: Allow building as a module (Aaron Kling).
- Minor cleanups for Rust cpufreq and cpumask APIs and fix MAINTAINERS
entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, and Lukas Bulwahn).
- Minor cleanups for miscellaneous cpufreq drivers (Arnd Bergmann, Dan
Carpenter, Krzysztof Kozlowski, Sven Peter, and Svyatoslav Ryhel)."
* tag 'cpufreq-arm-updates-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
drivers: cpufreq: add Tegra114 support
rust: cpumask: Replace `MaybeUninit` and `mem::zeroed` with `Opaque` APIs
cpufreq: tegra124: Allow building as a module
cpufreq: dt: Add register helper
cpufreq: Export disable_cpufreq()
cpufreq: armada-8k: Fix off by one in armada_8k_cpufreq_free_table()
cpufreq: armada-8k: make both cpu masks static
rust: cpufreq: use c_ types from kernel prelude
rust: cpufreq: Ensure C ABI compatibility in all unsafe
cpufreq: brcmstb-avs: Fully open-code compatible for grepping
cpufreq: apple: drop default ARCH_APPLE in Kconfig
MAINTAINERS: adjust file entry in CPU HOTPLUG
|
|
Check that gpfifo.post() exists before trying to call it.
Fixes: 862450a85b85 ("drm/nouveau/gf100-: track chan progress with non-WFI semaphore release")
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Closes: https://lore.kernel.org/lkml/aElJIo9_Se6tAR1a@audible.transient.net/
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Closes: https://lore.kernel.org/all/CALjTZvZgH0N43rMTcZiDVSX93PFL680hsYPwtp8=Ja1OWPvZ1A@mail.gmail.com/
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Link: https://lore.kernel.org/r/20250714025923.29591-1-bskeggs@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
We need the USB/Thunderbolt fixes in here for other patches to be on top
of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Synch HD-audio changes landed in 6.16-rc7.
Mostly for file rename tracking.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The mute LED on the HP Pavilion Laptop 15-eg0xxx,
which uses the ALC287 codec, didn't work.
This patch fixes the issue by enabling the ALC287_FIXUP_HP_GPIO_LED quirk.
Tested on a physical device, the LED now works as intended.
Signed-off-by: Dawid Rezler <dawidrezler.patches@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250720154907.80815-2-dawidrezler.patches@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Now that the oldest supported binutils version is 2.30, the macros that
emit the SHA-512 instructions as '.inst' words are no longer needed. So
drop them. No change in the generated machine code.
Changed from the original patch by Ard Biesheuvel:
(https://lore.kernel.org/r/20250515142702.2592942-2-ardb+git@google.com):
- Reduced scope to just SHA-512
- Added comment that explains why "sha3" is used instead of "sha2"
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250718220706.475240-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
The assembly code that does all 80 rounds of SHA-1 is highly repetitive.
Replace it with 20 expansions of a macro that does 4 rounds, using the
macro arguments and .if directives to handle the slight variations
between rounds. This reduces the length of sha1-ni-asm.S by 129 lines
while still producing the exact same object file. This mirrors
sha256-ni-asm.S which uses this same strategy.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250718191900.42877-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
- Store the previous state in %xmm8-%xmm9 instead of spilling it to the
stack. There are plenty of unused XMM registers here, so there is no
reason to spill to the stack. (While 32-bit code is limited to
%xmm0-%xmm7, this is 64-bit code, so it's free to use %xmm8-%xmm15.)
- Remove the unnecessary check for nblocks == 0. sha1_ni_transform() is
always passed a positive nblocks.
- To get an XMM register with 'e' in the high dword and the rest zeroes,
just zeroize the register using pxor, then load 'e'. Previously the
code loaded 'e', then zeroized the lower dwords by AND-ing with a
constant, which was slightly less efficient.
- Instead of computing &DATA_PTR[NBLOCKS << 6] and stopping when
DATA_PTR reaches that value, instead just decrement NBLOCKS on each
iteration and stop when it reaches 0. This is fewer instructions.
- Rename DIGEST_PTR to STATE_PTR. It points to the SHA-1 internal
state, not a SHA-1 digest value.
This commit shrinks the code size of sha1_ni_transform() from 624 bytes
to 589 bytes and also shrinks rodata by 16 bytes.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250718191900.42877-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Improve crc32c() performance on lengths >= 512 bytes by using
crc32_lsb_vpclmul_avx512() instead of crc32c_x86_3way(), when the CPU
supports VPCLMULQDQ and has a "good" implementation of AVX-512. For now
that means AMD Zen 4 and later, and Intel Sapphire Rapids and later.
Pass crc32_lsb_vpclmul_avx512() the table of constants needed to make it
use the CRC-32C polynomial.
Rationale: VPCLMULQDQ performance has improved on newer CPUs, making
crc32_lsb_vpclmul_avx512() faster than crc32c_x86_3way(), even though
crc32_lsb_vpclmul_avx512() is designed for generic 32-bit CRCs and does
not utilize x86_64's dedicated CRC-32C instructions.
Performance results for len=4096 using crc_kunit:
CPU Before (MB/s) After (MB/s)
====================== ============= ============
AMD Zen 4 (Genoa) 19868 28618
AMD Zen 5 (Ryzen AI 9 365) 24080 46940
AMD Zen 5 (Turin) 29566 58468
Intel Sapphire Rapids 22340 73794
Intel Emerald Rapids 24696 78666
Performance results for len=512 using crc_kunit:
CPU Before (MB/s) After (MB/s)
====================== ============= ============
AMD Zen 4 (Genoa) 7251 7758
AMD Zen 5 (Ryzen AI 9 365) 17481 19135
AMD Zen 5 (Turin) 21332 25424
Intel Sapphire Rapids 18886 29312
Intel Emerald Rapids 19675 29045
That being said, in the above benchmarks the ZMM registers are "warm",
so they don't quite tell the whole story. While significantly improved
from older Intel CPUs, Intel still has ~2000 ns of ZMM warm-up time
where 512-bit instructions execute 4 times more slowly than they
normally do. In contrast, AMD does better and has virtually zero ZMM
warm-up time (at most ~60 ns). Thus, while this change is always
beneficial on AMD, strictly speaking there are cases in which it is not
beneficial on Intel, e.g. a small number of 512-byte messages with
"cold" ZMM registers. But typically, it is beneficial even on Intel.
Note that on AMD Zen 3--5, crc32c() performance could be further
improved with implementations that interleave crc32q and VPCLMULQDQ
instructions. Unfortunately, it appears that a different such
implementation would be optimal on *each* of these microarchitectures.
Such improvements are left for future work. This commit just improves
the way that we choose the implementations we already have.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250719224938.126512-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Reorganize the crc-pclmul static_call initialization to place more of
the logic in the *_mod_init_arch() functions instead of in the
INIT_CRC_PCLMUL macro. This provides the flexibility to do more than a
single static_call update for each CPU feature check. Right away,
optimize crc64_mod_init_arch() to check the CPU features just once
instead of twice, doing both the crc64_msb and crc64_lsb static_call
updates together. A later commit will also use this to initialize an
additional static_key when crc32_lsb_vpclmul_avx512() is enabled.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250719224938.126512-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
If smb2_create_link() is called with ReplaceIfExists set and the name
does exist then a deadlock will happen.
ksmbd_vfs_kern_path_locked() will return with success and the parent
directory will be locked. ksmbd_vfs_remove_file() will then remove the
file. ksmbd_vfs_link() will then be called while the parent is still
locked. It will try to lock the same parent and will deadlock.
This patch moves the ksmbd_vfs_kern_path_unlock() call to *before*
ksmbd_vfs_link() and then simplifies the code, removing the file_present
flag variable.
Signed-off-by: NeilBrown <neil@brown.name>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
ksmbd_vfs_kern_path_locked() first tries to look up the path with the
given case. When this fails, if caseless is set, it loops over the
components in the path, opening the relevant directory and searching
for a name which matches. This name is copied over the original and the
the process repeats. Each time a lookup with the newly updated path is
repeated from the top (vfs_path_lookup()).
When the last component has been case-corrected the simplest next step
is to repeat the original lookup with ksmbd_vfs_path_lookup_locked().
If this works it gives exactly what we want, if it fails it gives the
correct failure.
This observation allows the code to be simplified, in particular
removing the ksmbd_vfs_lock_parent() call.
This patch also removes the duplication of name and filepath (two
names for the one thing) and calls path_put(parent_path) sooner so
parent_path can be passed directly to vfs_path_lookup avoiding the need
to store it temporarily in path and then copying into parent_path.
This patch removes one user of ksmbd_vfs_lock_parent() which will
simplify a future patch.
Signed-off-by: NeilBrown <neil@brown.name>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In process_query_dir_entries(), instead of locking the directory,
performing a lookup, then unlocking, we can simply call
lookup_one_unlocked(). That takes locks the directory only when needed.
This removes the only users of lock_dir() and unlock_dir() so they can
be removed.
Signed-off-by: NeilBrown <neil@brown.name>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix timerlat with use of FORTIFY_SOURCE
FORTIFY_SOURCE was added to the stack tracer where it compares the
entry->caller array to having entry->size elements.
timerlat has the following:
memcpy(&entry->caller, fstack->calls, size);
entry->size = size;
Which triggers FORTIFY_SOURCE as the caller is populated before the
entry->size is initialized.
Swap the order to satisfy FORTIFY_SOURCE logic.
- Add down_write(trace_event_sem) when adding trace events in modules
Trace events being added to the ftrace_events array are protected by
the trace_event_sem semaphore. But when loading modules that have
trace events, the addition of the events are not protected by the
semaphore and loading two modules that have events at the same time
can corrupt the list.
Also add a lockdep_assert_held(trace_event_sem) to
_trace_add_event_dirs() to confirm it is held when iterating the
list.
* tag 'trace-v6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Add down_write(trace_event_sem) when adding trace event
tracing/osnoise: Fix crash in timerlat_dump_stack()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"omap:
- add missing error check
- fix PM disable in probe error path
stm32:
- unmap DMA buffer on transfer failure
- use correct device when mapping and unmapping during transfers"
* tag 'i2c-for-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: unmap DMA mapped buffer
i2c: stm32: fix the device used for the DMA map
i2c: omap: Fix an error handling path in omap_i2c_probe()
i2c: omap: Handle omap_i2c_init() errors in omap_i2c_probe()
|
|
During probe, when the block layer registers a request queue, it
defaults to the mq-deadline I/O scheduler if the device is single-queue
and the mq-deadline module is available. To determine availability, the
elevator_set_default() invokes elevator_find_get(), which increments the
module's reference count. However, this reference is never released,
resulting in a module reference leak that prevents the mq-deadline module
from being unloaded.
This patch fixes the issue by ensuring the acquired module reference is
properly released.
Fixes: 1e44bedbc921 ("block: unifying elevator change")
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250719132722.769536-1-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a dependency for IO_URING for the GCOV_PROFILE_URING symbol.
Without this patch the EXPERT config menu ends with
"Enable IO uring support" and the menu prompts for
GCOV_PROFILE_URING and IO_URING_MOCK_FILE are not subordinate to it.
This causes all of the EXPERT Kconfig options that follow
GCOV_PROFILE_URING to be display in the "upper" menu (General setup),
just following the EXPERT menu.
Fixes: 1802656ef890 ("io_uring: add GCOV_PROFILE_URING Kconfig option")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: io-uring@vger.kernel.org
Link: https://lore.kernel.org/r/20250720010456.2945344-1-rdunlap@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 bug fix from Thomas Gleixner:
"A single fix for a GCC wreckage, which emits a KCSAN instrumentation
call in __sev_es_nmi_complete() despite the function being annotated
with 'noinstr'.
As all functions in that source file are noinstr, exclude the whole
file from KCSAN in the Makefile to cure it"
* tag 'x86-urgent-2025-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Work around broken noinstr on GCC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Thomas Gleixner:
"A single fix for the futex selftest code to make 32-bit user space
work correctly on 64-bit kernels.
sys_futex_wait() expects a struct __kernel_timespec for the timeout,
but the selftest uses struct timespec, which is the original 32-bit
non 2038 compliant variant.
Fix it up by converting the callsite supplied timespec to a
__kernel_timespec and hand that into the syscall"
* tag 'locking-urgent-2025-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/futex: Convert 32-bit timespec to 64-bit version for 32-bit compatibility mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single fix for the scheduler.
A recent commit changed the runqueue counter nr_uninterruptible to an
unsigned int. Due to the fact that the counters are not updated on
migration of a uninterruptble task to a different CPU, these counters
can exceed INT_MAX.
The counter is cast to long in the load average calculation, which
means that the cast expands into negative space resulting in bogus
load average values.
Convert it back to unsigned long to fix this.
* tag 'sched-urgent-2025-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Change nr_uninterruptible type to unsigned long
|
|
When introduced, the IoRequest doc-tests did depend on infrastructure
added in subsequent patches, hence they temporarily had to be disabled.
Now that we have the corresponding platform device infrastructure,
enable them.
Link: https://lore.kernel.org/r/DBG39YMN2TX6.1VR4PEQSI8PSG@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The previous patches have added the abstractions for Resources and the
ability to map them and therefore read and write the underlying memory .
The only thing missing to make this accessible for platform devices is
to provide accessors that return instances of IoRequest<'a>. These
ensure that the resource are valid only for the lifetime of the platform
device, and that the platform device is in the Bound state.
Therefore, add these accessors. Also make it possible to retrieve
resources from platform devices in Rust using either a name or an index.
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250717-topics-tyr-platform_iomem-v15-3-beca780b77e3@collabora.com
[ Remove #[expect(dead_code)] from IoRequest::new() and move SAFETY
comments right on top of unsafe blocks to avoid clippy warnings for
some (older) clippy versions. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add a generic iomem abstraction to safely read and write ioremapped
regions. This abstraction requires a previously acquired IoRequest
instance. This makes it so that both the resource and the device match,
or, in other words, that the resource is indeed a valid resource for a
given bound device.
A subsequent patch will add the ability to retrieve IoRequest instances
from platform devices.
The reads and writes are done through IoRaw, and are thus checked either
at compile-time, if the size of the region is known at that point, or at
runtime otherwise.
Non-exclusive access to the underlying memory region is made possible to
cater to cases where overlapped regions are unavoidable.
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250717-topics-tyr-platform_iomem-v15-2-beca780b77e3@collabora.com
[ Add #[expect(dead_code)] to avoid a temporary warning, remove
unnecessary OF_ID_TABLE constants in doc-tests and ignore doc-tests
for now to avoid a temporary build failure. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
In preparation for ioremap support, add a Rust abstraction for struct
resource.
A future commit will introduce the Rust API to ioremap a resource from a
platform device. The current abstraction, therefore, adds only the
minimum API needed to get that done.
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Co-developed-by: Fiona Behrens <me@kloenk.dev>
Signed-off-by: Fiona Behrens <me@kloenk.dev>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250717-topics-tyr-platform_iomem-v15-1-beca780b77e3@collabora.com
[ Capitalize safety comments and end it with a period. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
If the btree node is encrypted, this caused us to initialize
found_btree_node from the encrypted header.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Select use CONFIG_SYSFB only if EFI is enabled (Michael Kelley)
- An assorted set of fixes to remove warnings for missing export.h
header inclusion (Naman Jain)
- An assorted set of fixes for when Linux run as the root partition
for Microsoft Hypervisor (Mukesh Rathor, Nuno Das Neves, Stanislav
Kinsburskii)
- Fix the check for HYPERVISOR_CALLBACK_VECTOR (Naman Jain)
- Fix fcopy tool to handle irregularities with size of ring buffer
(Naman Jain)
- Fix incorrect file path conversion in fcopy tool (Yasumasa Suenaga)
* tag 'hyperv-fixes-signed-20250718' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
tools/hv: fcopy: Fix irregularities with size of ring buffer
PCI: hv: Use the correct hypercall for unmasking interrupts on nested
x86/hyperv: Expose hv_map_msi_interrupt()
Drivers: hv: Use nested hypercall for post message and signal event
x86/hyperv: Clean up hv_map/unmap_interrupt() return values
x86/hyperv: Fix usage of cpu_online_mask to get valid cpu
PCI: hv: Don't load the driver for baremetal root partition
net: mana: Fix warnings for missing export.h header inclusion
PCI: hv: Fix warnings for missing export.h header inclusion
clocksource: hyper-v: Fix warnings for missing export.h header inclusion
x86/hyperv: Fix warnings for missing export.h header inclusion
Drivers: hv: Fix warnings for missing export.h header inclusion
Drivers: hv: Fix the check for HYPERVISOR_CALLBACK_VECTOR
tools/hv: fcopy: Fix incorrect file path conversion
Drivers: hv: Select CONFIG_SYSFB only if EFI is enabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some USB and Thunderbolt driver fixes for reported problems
for 6.16-rc6. Included in here are:
- Thunderbolt fixes for some much-reported issues
- dwc2 driver fixes
- dwc3 driver fixes
- new usb-serial driver device ids
- gadgetfs configfs fix
- musb driver fix
- USB hub driver fix
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: hub: Don't try to recover devices lost during warm reset.
usb: dwc2: gadget: Fix enter to hibernation for UTMI+ PHY
usb: dwc3: qcom: Don't leave BCR asserted
USB: serial: option: add Telit Cinterion FE910C04 (ECM) composition
USB: serial: ftdi_sio: add support for NDI EMGUIDE GEMINI
usb: gadget: configfs: Fix OOB read on empty string write
usb: musb: fix gadget state on disconnect
USB: serial: option: add Foxconn T99W640
thunderbolt: Fix bit masking in tb_dp_port_set_hops()
thunderbolt: Fix wake on connect at runtime
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are two serial driver fixes for 6.16-rc6 that do:
- fix for the serial core OF resource leak
- pch_uart driver fix for a "incorrect variable" issue
Both of these have been in linux-next for over a week with no reported
problems"
* tag 'tty-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
pch_uart: Fix dma_sync_sg_for_device() nents value
serial: core: fix OF node leak
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small driver fixes for the vchiq_arm staging driver:
- reverts of previous changes that turned out to caused problems.
- change to prevent a resource leak
All of these have been in linux-next this week with no reported
problems"
* tag 'staging-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_arm: Make vchiq_shutdown never fail
Revert "staging: vchiq_arm: Create keep-alive thread during probe"
Revert "staging: vchiq_arm: Improve initial VCHIQ connect"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO fixes from Greg KH:
"Here are some char/misc/iio and other driver fixes for 6.16-rc7.
Included in here are:
- IIO driver fixes for reported problems
- Interconnect driver fixes for reported problems
- nvmem driver fixes
- bunch of comedi driver fixes for long-term bugs
- Kconfig dependancy fixes for mux drivers
- other small driver fixes for reported problems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (35 commits)
nvmem: layouts: u-boot-env: remove crc32 endianness conversion
misc: amd-sbi: Explicitly clear in/out arg "mb_in_out"
misc: amd-sbi: Address copy_to/from_user() warning reported in smatch
misc: amd-sbi: Address potential integer overflow issue reported in smatch
comedi: comedi_test: Fix possible deletion of uninitialized timers
comedi: Fix initialization of data for instructions that write to subdevice
comedi: Fix use of uninitialized data in insn_rw_emulate_bits()
comedi: das6402: Fix bit shift out of bounds
comedi: aio_iiro_16: Fix bit shift out of bounds
comedi: pcl812: Fix bit shift out of bounds
comedi: das16m1: Fix bit shift out of bounds
comedi: Fix some signed shift left operations
comedi: Fail COMEDI_INSNLIST ioctl if n_insns is too large
nvmem: imx-ocotp: fix MAC address byte length
MAINTAINERS: add miscdevice Rust abstractions
mux: mmio: Fix missing CONFIG_REGMAP_MMIO
iio: dac: ad3530r: Fix incorrect masking for channels 4-7 in powerdown mode
iio: adc: ad7380: fix adi,gain-milli property parsing
iio: adc: ad7949: use spi_is_bpw_supported()
iio: accel: fxls8962af: Fix use after free in fxls8962af_fifo_flush
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"A fix adding missing validation that 8 bit I/O mode is actually
supported for the specific device when attempting to use it.
Anything that runs into this should already have been having problems,
enforcing this should just make things safer and more obvious"
* tag 'spi-fix-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Add check for 8-bit transfer with 8 IO mode support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"A fix for a memory leak when we get an error during regmap init for a
bus that uses free_on_exit to clean up device specific data"
* tag 'regmap-fix-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: fix potential memory leak of regmap_bus
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
- just a small fixup to the xpad driver correcting the recent addition
of the Acer NGR200 controller
* tag 'input-for-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - set correct controller type for Acer NGR200
|
|
Add KUnit tests for the seq_buf API to ensure its correctness and
prevent future regressions, covering the following functions:
- seq_buf_init()
- DECLARE_SEQ_BUF()
- seq_buf_clear()
- seq_buf_puts()
- seq_buf_putc()
- seq_buf_printf()
- seq_buf_get_buf()
- seq_buf_commit()
$ tools/testing/kunit/kunit.py run seq_buf
=================== seq_buf (9 subtests) ===================
[PASSED] seq_buf_init_test
[PASSED] seq_buf_declare_test
[PASSED] seq_buf_clear_test
[PASSED] seq_buf_puts_test
[PASSED] seq_buf_puts_overflow_test
[PASSED] seq_buf_putc_test
[PASSED] seq_buf_printf_test
[PASSED] seq_buf_printf_overflow_test
[PASSED] seq_buf_get_buf_commit_test
===================== [PASSED] seq_buf =====================
Link: https://lore.kernel.org/r/20250717085156.work.363-kees@kernel.org
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The controller should have been set as XTYPE_XBOX360 and not XTYPE_XBOX.
Also the entry is in the wrong place. Fix it.
Reported-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Nilton Perim Neto <niltonperimneto@gmail.com>
Link: https://lore.kernel.org/r/20250708033126.26216-2-niltonperimneto@gmail.com
Fixes: 22c69d786ef8 ("Input: xpad - support Acer NGR 200 Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Since 6ee9b3d84775 ("kasan: remove kasan_find_vm_area() to prevent
possible deadlock"), more detailed info about the vmalloc mapping and the
origin was dropped due to potential deadlocks.
While fixing the deadlock is necessary, that patch was too quick in
killing an otherwise useful feature, and did no due-diligence in
understanding if an alternative option is available.
Restore printing more helpful vmalloc allocation info in KASAN reports
with the help of vmalloc_dump_obj(). Example report:
| BUG: KASAN: vmalloc-out-of-bounds in vmalloc_oob+0x4c9/0x610
| Read of size 1 at addr ffffc900002fd7f3 by task kunit_try_catch/493
|
| CPU: [...]
| Call Trace:
| <TASK>
| dump_stack_lvl+0xa8/0xf0
| print_report+0x17e/0x810
| kasan_report+0x155/0x190
| vmalloc_oob+0x4c9/0x610
| [...]
|
| The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900002fd000 allocated at vmalloc_oob+0x36/0x610
| The buggy address belongs to the physical page:
| page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x126364
| flags: 0x200000000000000(node=0|zone=2)
| raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000
| raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
| page dumped because: kasan: bad access detected
|
| [..]
Link: https://lkml.kernel.org/r/20250716152448.3877201-1-elver@google.com
Fixes: 6ee9b3d84775 ("kasan: remove kasan_find_vm_area() to prevent possible deadlock")
Signed-off-by: Marco Elver <elver@google.com>
Suggested-by: Uladzislau Rezki <urezki@gmail.com>
Acked-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: Yunseong Kim <ysk@kzalloc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After a recent change in clang to expose uninitialized warnings from const
variables [1], there is a false positive warning from the if statement in
advisor_mode_show().
mm/ksm.c:3687:11: error: variable 'output' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
3687 | else if (ksm_advisor == KSM_ADVISOR_SCAN_TIME)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mm/ksm.c:3690:33: note: uninitialized use occurs here
3690 | return sysfs_emit(buf, "%s\n", output);
| ^~~~~~
Rewrite the if statement to implicitly make KSM_ADVISOR_NONE the else
branch so that it is obvious to the compiler that ksm_advisor can only be
KSM_ADVISOR_NONE or KSM_ADVISOR_SCAN_TIME due to the assignments in
advisor_mode_store().
Link: https://lkml.kernel.org/r/20250715-ksm-fix-clang-21-uninit-warning-v1-1-f443feb4bfc4@kernel.org
Fixes: 66790e9a735b ("mm/ksm: add sysfs knobs for advisor")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/2100
Link: https://github.com/llvm/llvm-project/commit/2464313eef01c5b1edf0eccf57a32cdee01472c7 [1]
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Jérôme has moved on from RH and has not been looking at HMM patches for
some time. I've made the most changes to the core code in the recent
period and Leon is now working on the HMM side from the RDMA ODP.
Link: https://lkml.kernel.org/r/0-v1-a1df5219c7a3+1d981-hmm_maintainers_jgg@nvidia.com
Closes: https://lore.kernel.org/all/39d43309-9f34-48bc-a9ad-108c607ba175@samsung.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Leon Romanovsky <leon@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To prevent inodes with invalid file types from tripping through the vfs
and causing malfunctions or assertion failures, add a missing sanity check
when reading an inode from a block device. If the file type is not valid,
treat it as a filesystem error.
Link: https://lkml.kernel.org/r/20250710134952.29862-1-konishi.ryusuke@gmail.com
Fixes: 05fe58fdc10d ("nilfs2: inode operations")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+895c23f6917da440ed0d@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=895c23f6917da440ed0d
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
PID_FMT does not have an offset field, so folio_split() tests are not
performed. Add PID_FMT_OFFSET with an offset field and use it to perform
folio_split() tests.
Link: https://lkml.kernel.org/r/20250709012800.3225727-1-ziy@nvidia.com
Fixes: 80a5c494c89f ("selftests/mm: add tests for folio_split(), buddy allocator like split")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Donet Tom <donettom@linux.ibm.com>
Tested-by : Donet Tom <donettom@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|