summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-20bnx2x: Change DCB context handlingDmitry Kravkov
After notification that DCBX configuration has ended arrived to the driver, the driver configured the FW/HW in sleepless context. As a result, it was possible to reach a race (mostly with CNIC registration) in which the configuration will return a timeout, failing to set the DCBX results correctly. This patch moves the configuration following the DCBX end into the slowpath RTNL task (i.e., sleepless context protected by the RTNL lock), allowing the configuration to cope with such races. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20bnx2x: dropless flow control not always functionalDmitry Kravkov
Since commit 3deb816 "bnx2x: Add a periodic task for link PHY events" link state changes can be detected not only via the attention flow but also from the periodic task. If the link state will change in such a manner (i.e., via the periodic task), dropless flow-control will not be configured. This patch remedies the issue, adding the missing configuration to all required flows. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20ipv6: drop packets with multiple fragmentation headersHannes Frederic Sowa
It is not allowed for an ipv6 packet to contain multiple fragmentation headers. So discard packets which were already reassembled by fragmentation logic and send back a parameter problem icmp. The updates for RFC 6980 will come in later, I have to do a bit more research here. Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20ipv6: remove max_addresses check from ipv6_create_tempaddrHannes Frederic Sowa
Because of the max_addresses check attackers were able to disable privacy extensions on an interface by creating enough autoconfigured addresses: <http://seclists.org/oss-sec/2012/q4/292> But the check is not actually needed: max_addresses protects the kernel to install too many ipv6 addresses on an interface and guards addrconf_prefix_rcv to install further addresses as soon as this limit is reached. We only generate temporary addresses in direct response of a new address showing up. As soon as we filled up the maximum number of addresses of an interface, we stop installing more addresses and thus also stop generating more temp addresses. Even if the attacker tries to generate a lot of temporary addresses by announcing a prefix and removing it again (lifetime == 0) we won't install more temp addresses, because the temporary addresses do count to the maximum number of addresses, thus we would stop installing new autoconfigured addresses when the limit is reached. This patch fixes CVE-2013-0343 (but other layer-2 attacks are still possible). Thanks to Ding Tianhong to bring this topic up again. Cc: Ding Tianhong <dingtianhong@huawei.com> Cc: George Kargiotakis <kargig@void.gr> Cc: P J P <ppandit@redhat.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-19Merge tag 'iio-fixes-for-3.11c' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Third round of IIO fixes for the 3.11 series. Only one fix in this pull request. A straight forward incorrect read address in the adjd_s311 driver.
2013-08-20Merge branch 'security-fixes' into fixesRussell King
2013-08-19proc: more readdir conversion bug-fixesLinus Torvalds
In the previous commit, Richard Genoud fixed proc_root_readdir(), which had lost the check for whether all of the non-process /proc entries had been returned or not. But that in turn exposed _another_ bug, namely that the original readdir conversion patch had yet another problem: it had lost the return value of proc_readdir_de(), so now checking whether it had completed successfully or not didn't actually work right anyway. This reinstates the non-zero return for the "end of base entries" that had also gotten lost in commit f0c3b5093add ("[readdir] convert procfs"). So now you get all the base entries *and* you get all the process entries, regardless of getdents buffer size. (Side note: the Linux "getdents" manual page actually has a nice example application for testing getdents, which can be easily modified to use different buffers. Who knew? Man-pages can be useful) Reported-by: Emmanuel Benisty <benisty.e@gmail.com> Reported-by: Marc Dionne <marc.c.dionne@gmail.com> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-20ARM: 7816/1: CONFIG_KUSER_HELPERS: fix help textNicolas Pitre
Commit f6f91b0d9fd9 ("ARM: allow kuser helpers to be removed from the vector page") introduced some help text for the CONFIG_KUSER_HELPERS option which is rather contradictory. Let's fix that, and improve it a little. Cc: <stable@vger.kernel.org> Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-20ARM: 7815/1: kexec: offline non panic CPUs on Kdump panicVijaya Kumar K
In case of normal kexec kernel load, all cpu's are offlined before calling machine_kexec().But in case crash panic cpus are relaxed in machine_crash_nonpanic_core() SMP function but not offlined. When crash kernel is loaded with kexec and on panic trigger machine_kexec() checks for number of cpus online. If more than one cpu is online machine_kexec() fails to load with below error kexec: error: multiple CPUs still online In machine_crash_nonpanic_core() SMP function, offline CPU before cpu_relax Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-20ARM: 7819/1: fiq: Cast the first argument of flush_icache_range()Fabio Estevam
Commit 2ba85e7af4 (ARM: Fix FIQ code on VIVT CPUs) causes the following build warning: arch/arm/kernel/fiq.c:92:3: warning: passing argument 1 of 'cpu_cache.coherent_kern_range' makes integer from pointer without a cast [enabled by default] Cast it as '(unsigned long)base' to avoid the warning. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-19ARM: ux500: set coherent_dma_mask for dma40Fabio Baltieri
Set coherent_dma_mask to DMA_BIT_MASK(32) for dma40 platform_device, as without this DMA allocations were failing with the error: dma40 dma40.0: coherent DMA mask is unset when booting without device-tree. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-19ARM: ux500: remove u8500_secondary_startup from INIT section.Srinivas Kandagatla
This patch removes u8500_secondary_startup from _INIT section, there are two reason for this removal. 1. discarding such a small code does not save much, given the RAM sizes. 2. Having this code discarded, creates corruption issue when we boot smp-kernel with nr_cpus=1 or with single cpu node in DT. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-19ARM: ux500: add restart support via prcmuFabio Baltieri
Add necessary code to restart ux500 based machines using prcmu_system_reset(). Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-19iio: adjd_s311: Fix non-scan mode data readPeter Meerwald
forgot to convert channel index to data register Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-19Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-08-19proc: return on proc_readdir errorRichard Genoud
Commit f0c3b5093add ("[readdir] convert procfs") introduced a bug on the listing of the proc file-system. The return value of proc_readdir() isn't tested anymore in the proc_root_readdir function. This lead to an "interesting" behaviour when we are using the getdents() system call with a buffer too small: instead of failing, it returns the first entries of /proc (enough to fill the given buffer), plus the PID directories. This is not triggered on glibc (as getdents is called with a 32KB buffer), but on uclibc, the buffer size is only 1KB, thus some proc entries are missing. See https://lkml.org/lkml/2013/8/12/288 for more background. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-19ARM: davinci: nand: specify ecc strengthSekhar Nori
Starting with kernel v3.5, it is mandatory to specify ECC strength when using hardware ECC. Without this, kernel panics with a warning of the sort: Driver must set ecc.strength when using hardware ECC ------------[ cut here ]------------ kernel BUG at drivers/mtd/nand/nand_base.c:3519! Fix this by specifying ECC strength for the boards which were missing this. Reported-by: Holger Freyther <holger@freyther.de> Cc: <stable@vger.kernel.org> #v3.5+ Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixesLinus Torvalds
Pull gfs2 fixes from Steven Whitehouse: "Out of these five patches, the one for ensuring that the number of revokes is not exceeded, and the one for checking the glock is not already held in gfs2_getxattr are the two most important. The latter can be triggered by selinux. The other three patches are very small and fix mostly fairly trivial issues" * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: Check for glock already held in gfs2_getxattr GFS2: alloc_workqueue() doesn't return an ERR_PTR GFS2: don't overrun reserved revokes GFS2: WQ_NON_REENTRANT is meaningless and going away GFS2: Fix typo in gfs2_create_inode()
2013-08-19Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Two AMD microcode loader fixes and an OLPC firmware support fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, microcode, AMD: Fix early microcode loading x86, microcode, AMD: Make cpu_has_amd_erratum() use the correct struct cpuinfo_x86 x86: Don't clear olpc_ofw_header when sentinel is detected
2013-08-19Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Three small fixlets" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: nohz: fix compile warning in tick_nohz_init() nohz: Do not warn about unstable tsc unless user uses nohz_full sched_clock: Fix integer overflow
2013-08-19Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Bit late with these, was under the weather for a a few days, nothing too crazy: Some radeon regression fixes, one intel regression fix, and one fix to avoid a warn with i915 when used with dma-buf" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: unpin backing storage in dmabuf_unmap drm/radeon: fix WREG32_OR macro setting bits in a register drm/radeon/r7xx: fix copy paste typo in golden register setup drm/i915: Don't deref pipe->cpu_transcoder in the hangcheck code drm/radeon: fix UVD message buffer validation
2013-08-19kernel: fix new kernel-doc warning in wait.cRandy Dunlap
Fix new kernel-doc warnings in kernel/wait.c: Warning(kernel/wait.c:374): No description found for parameter 'p' Warning(kernel/wait.c:374): Excess function parameter 'word' description in 'wake_up_atomic_t' Warning(kernel/wait.c:374): Excess function parameter 'bit' description in 'wake_up_atomic_t' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-19libata: apply behavioral quirks to sil3826 PMPTerry Suereth
Fixing support for the Silicon Image 3826 port multiplier, by applying to it the same quirks applied to the Silicon Image 3726. Specifically fixes the repeated timeout/reset process which previously afflicted the 3726, as described from line 290. Slightly based on notes from: https://bugzilla.redhat.com/show_bug.cgi?id=890237 Signed-off-by: Terry Suereth <terry.suereth@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-08-19GFS2: Check for glock already held in gfs2_getxattrSteven Whitehouse
Since the introduction of atomic_open, gfs2_getxattr can be called with the glock already held, so we need to allow for this. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Reported-by: David Teigland <teigland@redhat.com> Tested-by: David Teigland <teigland@redhat.com>
2013-08-19GFS2: alloc_workqueue() doesn't return an ERR_PTRDan Carpenter
alloc_workqueue() returns a NULL on error, it doesn't return an ERR_PTR. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-08-19GFS2: don't overrun reserved revokesBenjamin Marzinski
When run during fsync, a gfs2_log_flush could happen between the time when gfs2_ail_flush checked the number of blocks to revoke, and when it actually started the transaction to do those revokes. This occassionally caused it to need more revokes than it reserved, causing gfs2 to crash. Instead of just reserving enough revokes to handle the blocks that currently need them, this patch makes gfs2_ail_flush reserve the maximum number of revokes it can, without increasing the total number of reserved log blocks. This patch also passes the number of reserved revokes to __gfs2_ail_flush() so that it doesn't go over its limit and cause a crash like we're seeing. Non-fsync calls to __gfs2_ail_flush will still cause a BUG() necessary revokes are skipped. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-08-19GFS2: WQ_NON_REENTRANT is meaningless and going awayTejun Heo
dbf2576e37 ("workqueue: make all workqueues non-reentrant") made WQ_NON_REENTRANT no-op and the flag is going away. Remove its usages. This patch doesn't introduce any behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: cluster-devel@redhat.com
2013-08-19GFS2: Fix typo in gfs2_create_inode()Steven Whitehouse
PTR_RET should be PTR_ERR Reported-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-08-19Merge tag 'drm-intel-fixes-2013-08-15' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel * tag 'drm-intel-fixes-2013-08-15' of git://people.freedesktop.org/~danvet/drm-intel: (153 commits) drm/i915: Don't deref pipe->cpu_transcoder in the hangcheck code
2013-08-19drm/i915: unpin backing storage in dmabuf_unmapDaniel Vetter
This fixes a WARN in i915_gem_free_object when the obj->pages_pin_count isn't 0. v2: Add locking to unmap, noticed by Chris Wilson. Note that even though we call unmap with our own dev->struct_mutex held that won't result in an immediate deadlock since we never go through the dma_buf interfaces for our own, reimported buffers. But it's still easy to blow up and anger lockdep, but that's already the case with our ->map implementation. Fixing this for real will involve per dma-buf ww mutex locking by the callers. And lots of fun. So go with the duct-tape approach for now. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reported-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Tested-by: Armin K. <krejzi@email.com> (v1) Tested-by: Dave Airlie <airlied@redhat.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-19Merge branch 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linuxDave Airlie
Just two small fixes for radeon. One fixes an array overrun that can cause garbage to get written to registers on some r7xx boards, the other is a small UVD fix. Also one audio regresion * 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix WREG32_OR macro setting bits in a register drm/radeon/r7xx: fix copy paste typo in golden register setup drm/radeon: fix UVD message buffer validation
2013-08-18Linux 3.11-rc6v3.11-rc6Linus Torvalds
2013-08-19ARM: dts: Add USB host node for Exynos4Dongjin Kim
This patch adds EHCI and OHCI host device nodes for Exynos4. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: add audio clock controller for exynos5420Andrew Bresticker
This adds device-tree bindings for the audio subsystem clock controller on Exynos 5420. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/57712 Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Correct the /include entry on exynos5420 dtsi filePadmavathi Venna
This patch corrects the /include to #include on exynos5420 Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Add MFC node for exynos 5420Arun Kumar K
The patch adds MFC nodes for exynos 5420. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Update 5250 MFC nodeArun Kumar K
The patch adds the MFC clock entry for the 5250 SoC. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Remove unsused MFC clock from exynos4Arun Kumar K
Removes the unused sclk_mfc from exynos4 dtsi file. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Update clocks entry in MFC binding documentationArun Kumar K
MFC driver is updated to use only one clock instead of two. Correcting this in the binding documentation. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Hook up internal PHY on ArndaleMark Brown
While the Linux driver stack is capable of figuring this out for itself document the fact that we really do use the internal PHY even with the directly wired hub on the board to save anyone else having to work this out for themselves. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Enable USB hub on ArndaleMark Brown
The Arndale has a SMSC USB3503 connected in hardware only mode like a PHY, support it using the usb-nop-xceiv binding. Note that due to a regrettable decision to use a regulator to represent the reset signal this uses a fixed voltage regulator to do that, there is a plan to use the reset controller binding once that is merged so it does not seem worthwhile to fix the usb-nop-xceiv driver at this point. Signed-off-by: Mark Brown <broonie@linaro.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Add secure-firmware boot support for OrigenQaud boardTushar Behera
OrigenQuad board boots with secure firmware support. Enable support for reading smc commands. The binding has been updated as per the documentation provided in Documentation/devicetree/bindings/arm/samsung-boards.txt. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-18drm/i915: Invalidate TLBs for the rings after a resetChris Wilson
After any "soft gfx reset" we must manually invalidate the TLBs associated with each ring. Empirically, it seems that a suspend/resume or D3-D0 cycle count as a "soft reset". The symptom is that the hardware would fail to note the new address for its status page, and so it would continue to write the shadow registers and breadcrumbs into the old physical address (now used by something completely different, scary). Whereas the driver would read the new status page and never see any progress, it would appear that the GPU hung immediately upon resume. Based on a patch by naresh kumar kachhi <naresh.kumar.kacchi@intel.com> Reported-by: Thiago Macieira <thiago@kde.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64725 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Thiago Macieira <thiago@kde.org> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-18Revert "hp-wmi: Enable hotkeys on some systems"Matthew Garrett
This reverts commit b253c9d1d858a3f115f791ee4fe2b9399ae7dbbd. It's still causing problems on some systems. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-08-18sony-laptop: Fix reporting of gfx_switch_statusDaniel Serpell
Signed-off-by: Daniel Serpell <daniel.serpell@gmail.com> Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-08-18sony-laptop: return a negative error code in sonypi_compat_init()Wei Yongjun
Return -1 in the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-08-19ARM: dts: Add pin state information for DP HPD support to Exynos5420Vikas Sajjan
Add pin state information for DP HPD support that requires pin configuration support using pinctrl interface. Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Add DP controller DT node to exynos5420 SoCVikas Sajjan
Adds DP controller DT node to exynos5420 SoC Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Update DP controller DT Node for Exynos5 based SoCsVikas Sajjan
Moves the properties of DP controller to exynos5.dtsi which are common across exynos5 SoCs like Exynos5250 and Exynos5420. The PHY DP Node is based on Jingoo Han's <jg1.han@samsung.com> patch at https://patchwork.linuxtv.org/patch/19189/ Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Add FIMD DT node to exynos5420 DTS filesVikas Sajjan
Adds FIMD DT node to exynos5420 based SMDK. Also adds display-timimg information node. Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit (git 2.34.1) at 2025-09-15 17:33:48 +0000