summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-07-19Merge branch 'pci/controller/hyperv'Bjorn Helgaas
- Return zero, not garbage, when reading PCI_INTERRUPT_PIN from a Hyper-V device (Wei Liu) * pci/controller/hyperv: PCI: hv: Return zero, not garbage, when reading PCI_INTERRUPT_PIN
2024-07-19Merge branch 'pci/controller/exynos'Bjorn Helgaas
- Use devm_clk_bulk_get_all_enable() to simplify clock setup (Shradha Todi) * pci/controller/exynos: PCI: exynos: Adapt to use bulk clock APIs
2024-07-19Merge branch 'pci/controller/dra7xx'Bjorn Helgaas
- Correct the dra7xx_pcie_cpu_addr_fixup() parameter name, which takes a CPU address but called it "pci_addr" (Niklas Cassel) * pci/controller/dra7xx: PCI: dra7xx: Fix dra7xx_pcie_cpu_addr_fixup() parameter name
2024-07-19Merge branch 'pci/controller/artpec6'Bjorn Helgaas
- Correct the artpec6_pcie_cpu_addr_fixup() parameter name, which takes a CPU address but called it "pci_addr" (Niklas Cassel) * pci/controller/artpec6: PCI: artpec6: Fix artpec6_pcie_cpu_addr_fixup() parameter name
2024-07-19Merge branch 'pci/controller/al'Bjorn Helgaas
- Check IORESOURCE_BUS existence to avoid NULL pointer dereference (Aleksandr Mishin) * pci/controller/al: PCI: al: Check IORESOURCE_BUS existence during probe
2024-07-19Merge branch 'pci/controller/dwc'Bjorn Helgaas
- Use msleep() in DWC core instead of usleep_range() for ~100 ms sleep (Konrad Dybcio) - Fix iATU slot management to avoid using the wrong slot after PERST# assert/deassert, which could potentially cause DMA to go the wrong place (Frank Li) - Consolidate dw_pcie_prog_outbound_atu() arguments into a struct to ease adding new functionality like initiating Message TLPs (Yoshihiro Shimoda) - Add support for endpoints to initiate PCIe messages (Yoshihiro Shimoda) - Add #defines for PCIe INTx messages (Yoshihiro Shimoda) - Add support for endpoints to initiate PCIe PME_Turn_Off messages for system suspend (Frank Li) - Add dw_pcie_ep_linkdown() to reinitialize registers that are lost when the link goes down (Manivannan Sadhasivam) - Use dw_pcie_ep_linkdown() to reinitialize qcom non-sticky registers that are lost when the link goes down (Manivannan Sadhasivam) - Enforce DWC limitation that 64-bit BARs must start with the even numbered BAR (Niklas Cassel) * pci/controller/dwc: PCI: dwc: ep: Enforce DWC specific 64-bit BAR limitation PCI: layerscape-ep: Use the generic dw_pcie_ep_linkdown() API to handle Link Down event PCI: qcom-ep: Use the generic dw_pcie_ep_linkdown() API to handle Link Down event PCI: dwc: ep: Remove dw_pcie_ep_init_notify() wrapper PCI: dwc: ep: Add a generic dw_pcie_ep_linkdown() API to handle Link Down event PCI: dwc: Add generic MSG TLP support for sending PME_Turn_Off when system suspend PCI: Add PCIE_MSG_CODE_PME_TURN_OFF message macro PCI: Add PCIE_MSG_CODE_ASSERT_INTx message macros PCI: dwc: Add outbound MSG TLPs support PCI: dwc: Consolidate args of dw_pcie_prog_outbound_atu() into a structure PCI: dwc: Fix index 0 incorrectly being interpreted as a free ATU slot PCI: dwc: Use msleep() in dw_pcie_wait_for_link()
2024-07-19Merge branch 'pci/controller/gpio'Bjorn Helgaas
- Include <linux/irqchip/chained_irq.h> in dra7xx to avoid implicitly including it elsewhere (Andy Shevchenko) - Remove unused <linux/of_gpio.h> from aardvark and dwc drivers (dra7xx, meson, qcom, tegra194) (Andy Shevchenko) - Convert kirin to use scoped for_each_available_child_of_node() to ease future error exits (Javier Carrasco) - Convert imx6 and kirin to use the agnostic GPIO API to simplify GPIO setup and remove usage of the deprecated of_gpio.h API (Andy Shevchenko) * pci/controller/gpio: PCI: kirin: Convert to use agnostic GPIO API PCI: kirin: Convert kirin_pcie_parse_port() to scoped iterator PCI: imx6: Convert to use agnostic GPIO API PCI: dwc: Remove unused of_gpio.h inclusion PCI: aardvark: Remove unused of_gpio.h inclusion PCI: dra7xx: Add missing chained IRQ header inclusion
2024-07-19Merge branch 'pci/endpoint'Bjorn Helgaas
- Remove unused struct pci_epf_group.type_group (Christophe JAILLET) - Use cached epc_features instead of pci_epc_get_features() to avoid having to check for failure (potential NULL pointer dereference) (Manivannan Sadhasivam) - Drop pointless local msix_capable variable in pci_epf_test_alloc_space() (Manivannan Sadhasivam) - Rename struct pci_epc_event_ops.core_init to .epc_init, since "core" is no longer meaningful here (Manivannan Sadhasivam) - Rename pci_epc_bme_notify(), pci_epf_mhi_bme(), pci_epc_bme_notify() to spell out "bus_master_enable" instead of "bme" (Manivannan Sadhasivam) - Factor pci_epf_test_clear_bar() and pci_epf_test_free_space() out of pci_epf_test_unbind() so they can be reused elsewhere (Manivannan Sadhasivam) - Move DMA initialization to the pci_epf_mhi_epc_init() callback so endpoint drivers do this uniformly (Manivannan Sadhasivam) - Add endpoint testing for Link Down events (Manivannan Sadhasivam) - Add 'epc_deinit' event so endpoints that can be reset via PERST# (qcom, tegra194) can notify EPF drivers when this happens (Manivannan Sadhasivam) - Make pci_epc_class constant (Greg Kroah-Hartman) - Fix vpci_scan_bus() error checking to print error for failure (not success) and clean up after failure (Dan Carpenter) - Fix epf_ntb_epc_cleanup() error handling to clean up scratchpad BARs and clean up in mirror order of allocation (Dan Carpenter) - Add rk3588, which requires 64KB BAR alignment, to pci_endpoint_test (Niklas Cassel) - Use memcpy_toio()/memcpy_fromio() for endpoint BAR tests to improve performance (Niklas Cassel) - Set DMA mask to 48 bits always to simplify endpoint test, since there's there's no need to check for error or to fallback to 32 bits (Frank Li) - Suggest using programmable Vendor/Device ID (when supported) to use pci_endpoint_test without having to add new entries (Yoshihiro Shimoda) - Remove unused pci_endpoint_test_bar_{readl,writel}() (Jiapeng Chong) - Remove 'linkup' and add 'add_cfs' to the endpoint function driver 'ops' documentation to match the code (Alexander Stein) - * pci/endpoint: Documentation: PCI: pci-endpoint: Fix EPF ops list misc: pci_endpoint_test: Remove unused pci_endpoint_test_bar_{readl,writel} functions misc: pci_endpoint_test: Document policy about adding pci_device_id misc: pci_endpoint_test: Refactor dma_set_mask_and_coherent() logic misc: pci_endpoint_test: Use memcpy_toio()/memcpy_fromio() for BAR tests misc: pci_endpoint_test: Add support for Rockchip rk3588 PCI: endpoint: Fix error handling in epf_ntb_epc_cleanup() PCI: endpoint: Clean up error handling in vpci_scan_bus() PCI: endpoint: Make pci_epc_class struct constant PCI: endpoint: Introduce 'epc_deinit' event and notify the EPF drivers PCI: endpoint: pci-epf-test: Handle Link Down event PCI: endpoint: pci-epf-{mhi/test}: Move DMA initialization to EPC init callback PCI: endpoint: pci-epf-test: Refactor pci_epf_test_unbind() function PCI: endpoint: Rename BME to Bus Master Enable PCI: endpoint: Rename core_init() callback in 'struct pci_epc_event_ops' to epc_init() PCI: endpoint: pci-epf-test: Use 'msix_capable' flag directly in pci_epf_test_alloc_space() PCI: endpoint: pci-epf-test: Make use of cached 'epc_features' in pci_epf_test_core_init() PCI: endpoint: Remove unused field in struct pci_epf_group
2024-07-19Merge branch 'pci/dt-bindings'Bjorn Helgaas
- Add "apb", "sys", "pmc", "msg", "err" for Endpoint descriptions as well as for Root Complexes (Niklas Cassel) - Add "tx_inta", "tx_intb", "tx_intc", "tx_intd" for interrupt signals triggered in response to PCIe Assert_INTx messages (Niklas Cassel) - Refactor rockchip-dw-pcie binding to move generic properties to a new rockchip-dw-pcie-common binding that can be shared by both RC and EP mode (Niklas Cassel) - Fix rockchip-dw-pcie description of INTx signals (Niklas Cassel) - Add rockchip-dw-pcie description of Endpoint controller (Niklas Cassel) - Avoid xilinx-versal-cpm overlapping of bridge registers and 32-bit BAR addresses (Thippeswamy Havalige) - Add qcom Operating Performance Points (OPP) table (Krishna chaitanya chundru) - Add a picture of mediatek,mt7621-pcie topology (Sergio Paracuellos) - Add a generic "ats-supported" property so the OS can discover whether a Root Complex supports ATS (Jean-Philippe Brucker) - Make the qcom,pcie-x1e80100 MHI register region mandatory (Abel Vesa) * pci/dt-bindings: dt-bindings: PCI: qcom: x1e80100: Make the MHI reg region mandatory dt-bindings: PCI: generic: Add ats-supported property dt-bindings: PCI: mediatek,mt7621-pcie: Add PCIe host topology ASCII graph dt-bindings: PCI: qcom: Add OPP table dt-bindings: PCI: xilinx-cpm: Fix overlapping of bridge register and 32-bit BAR addresses dt-bindings: PCI: rockchip: Add DesignWare based PCIe Endpoint controller dt-bindings: PCI: rockchip-dw-pcie: Fix description of legacy IRQ dt-bindings: PCI: rockchip-dw-pcie: Prepare for Endpoint mode support dt-bindings: PCI: snps,dw-pcie-ep: Add tx_int{a,b,c,d} legacy IRQs dt-bindings: PCI: snps,dw-pcie-ep: Add vendor specific interrupt-names dt-bindings: PCI: snps,dw-pcie-ep: Add vendor specific reg-name
2024-07-19Merge branch 'pci/resource'Bjorn Helgaas
- Rename find_resource() to find_resource_space() to make it more descriptive for exporting outside resource.c (Ilpo Järvinen) - Document find_resource_space() and the resource_constraint struct it uses (Ilpo Järvinen) - Add typedef resource_alignf to make it simpler to declare allocation constraint alignf callbacks (Ilpo Järvinen) - Open-code the no-constraint simple alignment case to make the simple_align_resource() default callback unnecessary (Ilpo Järvinen) - Export find_resource_space() because PCI bridge window allocation needs to learn whether there's space for a window (Ilpo Järvinen) - Fix a double-counting problem in PCI calculate_memsize() that led to allocating larger windows each time a bus was removed and rescanned (Ilpo Järvinen) - When we don't have space to allocate larger bridge windows, allocate windows only large enough for the downstream devices to prevent cases where a device worked originally, but not after being removed and re-added (Ilpo Järvinen) * pci/resource: PCI: Relax bridge window tail sizing rules PCI: Make minimum bridge window alignment reference more obvious PCI: Fix resource double counting on remove & rescan resource: Export find_resource_space() resource: Handle simple alignment inside __find_resource_space() resource: Use typedef for alignf callback resource: Document find_resource_space() and resource_constraint resource: Rename find_resource() to find_resource_space()
2024-07-19Merge branch 'pci/reset'Bjorn Helgaas
- Warn about doing a Secondary Bus Reset without holding the device lock (Dan Williams) - Lock bridge in addition to downstream hierarchy before doing a Secondary Bus Reset (Dan Williams) * pci/reset: PCI: Add missing bridge lock to pci_bus_lock() PCI: Warn on missing cfg_access_lock during secondary bus reset
2024-07-19Merge branch 'pci/hotplug'Bjorn Helgaas
- Detect if a device was removed or replaced during system sleep so we don't assume a new device is the one that used to be there. This uses Vendor/Device/Subsystem/Class/Revision and Device Serial Number (if implemented), so it's not fool-proof and drivers may know how to detect more cases (Lukas Wunner) - Add missing MODULE_DESCRIPTION() macro (Jeff Johnson) * pci/hotplug: PCI: acpiphp: Add missing MODULE_DESCRIPTION() macro PCI: pciehp: Detect device replacement during system sleep
2024-07-19Merge branch 'pci/err'Bjorn Helgaas
- Disable AER and DPC during suspend so that if they share an interrupt with PME and errors occur during suspend, the AER or DPC interrupt doesn't cause spurious wakeups (Kai-Heng Feng) * pci/err: PCI/DPC: Disable DPC service on suspend PCI/AER: Disable AER service on suspend
2024-07-19Merge branch 'pci/enumeration'Bjorn Helgaas
- Move the PRESERVE_BOOT_CONFIG ACPI _DSM evaluation from drivers/acpi to drivers/pci so we can unify with similar DT functionality (Vidya Sagar) - Add of_pci_preserve_config() to check for a DT "linux,pci-probe-only" property on a per-host bridge basis in addition to a global basis (Vidya Sagar) - Unify ACPI PRESERVE_BOOT_CONFIG _DSM and DT "linux,pci-probe-only" in a generic pci_preserve_config() path (Vidya Sagar) * pci/enumeration: PCI: Use preserve_config in place of pci_flags PCI: Unify ACPI and DT 'preserve config' support PCI: of: Add of_pci_preserve_config() for per-host bridge support PCI: Move PRESERVE_BOOT_CONFIG _DSM evaluation to pci_register_host_bridge()
2024-07-19Merge branch 'pci/dpc'Bjorn Helgaas
- If there's a device below a bridge, prevent a use-after-free by holding a reference to the device while waiting for the secondary bus to be ready in case the device is concurrently removed, e.g., by DPC (Lukas Wunner) * pci/dpc: PCI/DPC: Fix use-after-free on concurrent DPC and hot-removal
2024-07-19Merge branch 'pci/devres'Bjorn Helgaas
- Add pcim_add_mapping_to_legacy_table() and pcim_remove_mapping_from_legacy_table() helper functions to simplify devres iomap table (Philipp Stanner) - Reimplement devres that take a bit mask of BARs in a way that can be used to map partial BARs as well as entire BARs (Philipp Stanner) - Deprecate pcim_iomap_table() and pcim_iomap_regions_request_all() in favor of pcim_* request plus pcim_* mapping (Philipp Stanner) - Add pcim_request_region(), a managed interface to request a single BAR (Philipp Stanner) - Use the existing pci_is_enabled() interface to replace the struct devres.enabled bit (Philipp Stanner) - Move the struct pci_devres.pinned bit to struct pci_dev (Philipp Stanner) - Reimplement pcim_set_mwi() so it uses its own devres cleanup callback instead of a special-purpose bit in struct pci_devres (Philipp Stanner) - Add pcim_intx(), which is unambiguously managed, unlike pci_intx(), which is managed if pcim_enable_device() has been called but unmanaged otherwise (Philipp Stanner) - Remove pcim_release(), which is no longer needed after previous cleanups of pcim_set_mwi() and pci_intx() (Philipp Stanner) - Add pcim_iomap_range(), a managed interface to map part of a BAR (Philipp Stanner) - Fix vboxvideo leak by using the new pcim_iomap_range() instead of the unmanaged pci_iomap_range() (Philipp Stanner) * pci/devres: drm/vboxvideo: fix mapping leaks PCI: Add managed pcim_iomap_range() PCI: Remove legacy pcim_release() PCI: Add managed pcim_intx() PCI: Give pcim_set_mwi() its own devres cleanup callback PCI: Move struct pci_devres.pinned bit to struct pci_dev PCI: Remove struct pci_devres.enabled status bit PCI: Document hybrid devres hazards PCI: Add managed pcim_request_region() PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all() PCI: Add managed partial-BAR request and map infrastructure PCI: Add devres helpers for iomap table PCI: Add and use devres helper for bit masks
2024-07-19Merge branch 'pci/acs'Bjorn Helgaas
- Add ACS quirk for Broadcom BCM5760X NIC, which doesn't allow peer-to-peer transactions between functions, but doesn't advertise ACS support (Ajit Khaparde) - Add "pci=config_acs=" kernel command-line parameter to relax default ACS settings to enable peer-to-peer configurations. Requires expert knowledge of topology and ACS operation (Vidya Sagar) * pci/acs: PCI: Extend ACS configurability PCI: Add ACS quirk for Broadcom BCM5760X NIC
2024-07-19PCI: loongson: Enable MSI in LS7A Root ComplexHuacai Chen
The LS7A chipset can be used as part of a PCIe Root Complex with Loongson-3C6000 and similar CPUs. In this case, DEV_LS7A_PCIE_PORT5 has a PCI_CLASS_BRIDGE_HOST class code, and it is a Type 0 Function whose config space provides access to Root Complex registers. The DEV_LS7A_PCIE_PORT5 has an MSI Capability, and its MSI Enable bit must be set before other devices below the Root Complex can use MSI. This is not the standard PCI behavior of MSI Enable, so the normal PCI MSI code does not set it. Set the DEV_LS7A_PCIE_PORT5 MSI Enable bit via a quirk so other devices below the Root Complex can use MSI. [kwilczynski: exit early to reduce indentation; commit log] Link: https://lore.kernel.org/linux-pci/20240612065315.2048110-1-chenhuacai@loongson.cn Signed-off-by: Sheng Wu <wusheng@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2024-07-19ALSA: hda: tas2781: mark const variables as __maybe_unusedArnd Bergmann
An earlier patch changed the DECLARE_TLV_DB_SCALE declaration, but now there are additional static const variables that cause the same build warnings: In file included from sound/pci/hda/tas2781_hda_i2c.c:23: include/sound/tas2781-tlv.h:23:28: error: 'tas2563_dvc_table' defined but not used [-Werror=unused-const-variable=] 23 | static const unsigned char tas2563_dvc_table[][4] = { | ^~~~~~~~~~~~~~~~~ In file included from include/sound/tlv.h:10, from sound/pci/hda/tas2781_hda_i2c.c:22: include/sound/tas2781-tlv.h:20:35: error: 'tas2563_dvc_tlv' defined but not used [-Werror=unused-const-variable=] 20 | static const DECLARE_TLV_DB_SCALE(tas2563_dvc_tlv, -12150, 50, 1); | ^~~~~~~~~~~~~~~ Mark them all as unused as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20240719095640.3741247-1-arnd@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-07-19gpio: virtuser: avoid non-constant format stringArnd Bergmann
Using a string variable as an sprintf format is potentially dangerous, and gcc can warn about this: drivers/gpio/gpio-virtuser.c: In function 'gpio_virtuser_dbgfs_init_line_attrs': drivers/gpio/gpio-virtuser.c:808:9: error: format not a string literal and no format arguments [-Werror=format-security] 808 | sprintf(data->consumer, id); | ^~~~~~~ Change it to a simpler strscpy() instead to just copy it and check the destination buffer size. Fixes: 91581c4b3f29 ("gpio: virtuser: new virtual testing driver for the GPIO API") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20240719144422.2082394-1-arnd@kernel.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-07-19ALSA: usb-audio: Fix microphone sound on HD webcam.wangdicheng
I own an external usb Webcam, HD webcam, which had low mic volume and inconsistent sound quality. Video works as expected. (snip) [ 95.473820][ 1] [ T73] usb 5-2.2: new high-speed USB device number 7 using xhci_hcd [ 95.773974][ 1] [ T73] usb 5-2.2: New USB device found, idVendor=1bcf, idProduct=2281, bcdDevice= 0.05 [ 95.783445][ 1] [ T73] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 95.791872][ 1] [ T73] usb 5-2.2: Product: HD webcam [ 95.797001][ 1] [ T73] usb 5-2.2: Manufacturer: Sunplus IT Co [ 95.802996][ 1] [ T73] usb 5-2.2: SerialNumber: 20200513 [ 96.092610][ 2] [ T3680] usb 5-2.2: Warning! Unlikely big volume range (=4096), cval->res is probably wrong. [ 96.102436][ 2] [ T3680] usb 5-2.2: [5] FU [Mic Capture Volume] ch = 1, val = 0/4096/1 Set up quirk cval->res to 16 for 256 levels, Set GET_SAMPLE_RATE quirk flag to stop trying to get the sample rate. Confirmed that happened anyway later due to the backoff mechanism, After 3 failures. All audio stream on device interfaces share the same values, apart from wMaxPacketSize and tSamFreq : bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 1 Audio Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 3 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 1 bSubframeSize 2 bBitResolution 16 bSamFreqType 1 Discrete tSamFreq[ 0] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0064 1x 100 bytes bInterval 4 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 0 Undefined wLockDelay 0x0000 (snip) Testing patch provides consistent good sound recording quality and volume range. (snip) [ 95.473820][ 1] [ T73] usb 5-2.2: new high-speed USB device number 7 using xhci_hcd [ 95.773974][ 1] [ T73] usb 5-2.2: New USB device found, idVendor=1bcf, idProduct=2281, bcdDevice= 0.05 [ 95.783445][ 1] [ T73] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 95.791872][ 1] [ T73] usb 5-2.2: Product: HD webcam [ 95.797001][ 1] [ T73] usb 5-2.2: Manufacturer: Sunplus IT Co [ 95.802996][ 1] [ T73] usb 5-2.2: SerialNumber: 20200513 [ 96.110630][ 3] [ T3680] usbcore: registered new interface driver snd-usb-audio [ 96.114329][ 7] [ T3677] usb 5-2.2: Found UVC 1.00 device HD webcam (1bcf:2281) [ 96.167555][ 7] [ T3677] usbcore: registered new interface driver uvcvideo Signed-off-by: wangdicheng <wangdicheng@kylinos.cn> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20240719020906.8078-1-wangdich9700@163.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-07-19eth: fbnic: don't build the driver when skb has more than 21 fragsJakub Kicinski
Similarly to commit 0e03c643dc93 ("eth: fbnic: fix s390 build."), the driver won't build if skb_shared_info has more than 25 frags assuming a 64B cache line and 21 frags assuming a 128B cache line. (512 - 48 - 64) / 16 = 25 (512 - 48 - 128) / 16 = 21 Fixes: 0cb4c0a13723 ("eth: fbnic: Implement Rx queue alloc/start/stop/free") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20240717161600.1291544-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-19ARM: sa1100: make match function take a const pointerGreg Kroah-Hartman
In commit d69d80484598 ("driver core: have match() callback in struct bus_type take a const *"), the match callback for busses was changed to take a const pointer to struct device_driver. Unfortunately I missed fixing up the sa1111 code, and was only noticed after-the-fact by the kernel test robot. Resolve this issue by properly changing the sa111_match() function. Cc: Russell King <linux@armlinux.org.uk> Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *") Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20240712093916.2121096-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-19drm/stm: add COMMON_CLK dependencyArnd Bergmann
The added lvds driver and a change in the dsi driver resulted in failed builds when COMMON_CLK is disabled: x86_64-linux-ld: drivers/gpu/drm/stm/dw_mipi_dsi-stm.o: in function `dw_mipi_dsi_stm_remove': dw_mipi_dsi-stm.c:(.text+0x51e): undefined reference to `clk_hw_unregister' x86_64-linux-ld: drivers/gpu/drm/stm/lvds.o: in function `lvds_remove': lvds.c:(.text+0xe3): undefined reference to `of_clk_del_provider' x86_64-linux-ld: lvds.c:(.text+0xec): undefined reference to `clk_hw_unregister' x86_64-linux-ld: drivers/gpu/drm/stm/lvds.o: in function `lvds_pll_config': lvds.c:(.text+0xb5d): undefined reference to `clk_hw_get_rate' x86_64-linux-ld: drivers/gpu/drm/stm/lvds.o: in function `lvds_probe': lvds.c:(.text+0x1476): undefined reference to `clk_hw_register' x86_64-linux-ld: lvds.c:(.text+0x148b): undefined reference to `of_clk_hw_simple_get' x86_64-linux-ld: lvds.c:(.text+0x1493): undefined reference to `of_clk_add_hw_provider' x86_64-linux-ld: lvds.c:(.text+0x1535): undefined reference to `clk_hw_unregister' Add this as a dependency for the stm driver itself, since it will be required in practice anyway. Fixes: 185f99b61442 ("drm/stm: dsi: expose DSI PHY internal clock") Fixes: aca1cbc1c986 ("drm/stm: lvds: add new STM32 LVDS Display Interface Transmitter driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240719075454.3595358-1-arnd@kernel.org Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
2024-07-19dm vdo: fix a minor formatting issue in vdo.rstMasatake YAMATO
Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: Matthew Sakai <msakai@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-19dm vdo int-map: fix kerneldoc formattingMatthew Sakai
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202407141607.M3E2XQ0Z-lkp@intel.com/ Signed-off-by: Matthew Sakai <msakai@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-19dm vdo repair: add missing kerneldoc fieldsMatthew Sakai
Also remove trivial comment for increment_recovery_point. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9518 Signed-off-by: Matthew Sakai <msakai@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-19dm: Constify struct dm_block_validatorChristophe JAILLET
'struct dm_block_validator' are not modified in these drivers. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig, as an example: Before: ====== text data bss dec hex filename 32047 920 16 32983 80d7 drivers/md/dm-cache-metadata.o After: ===== text data bss dec hex filename 32075 896 16 32987 80db drivers/md/dm-cache-metadata.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-19dm-integrity: introduce the Inline modeMikulas Patocka
This commit introduces a new 'I' mode for dm-integrity. The 'I' mode may be selected if the underlying device has non-power-of-2 sector size. In this mode, dm-integrity will store integrity data directly in device's sectors and it will not use journal. This mode improves performance and reduces flash wear because there would be no journal writes. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-07-19drm/panic: Remove build time dependency with FRAMEBUFFER_CONSOLEJocelyn Falempe
Now that fbcon has the skip_panic option, there is no more conflicts between drm_panic and fbcon. Remove the build time dependency, so they can be both enabled. Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240717090102.968152-4-jfalempe@redhat.com
2024-07-19drm/fb-helper: Set skip_panic if the drm driver supports drm panicJocelyn Falempe
fb_info->skip_panic flag prevents fbcon from writing to the framebuffer during a kernel panic. So set it when the drm driver implements drm panic, to avoid overwriting the panic screen. Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240717090102.968152-3-jfalempe@redhat.com
2024-07-19fbcon: Add an option to disable fbcon in panicJocelyn Falempe
This is required to avoid conflict between DRM_PANIC, and fbcon. If a drm device already handle panic with drm_panic, it should set the skip_panic field in fb_info, so that fbcon will stay quiet, and not overwrite the panic_screen. Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240717090102.968152-3-jfalempe@redhat.com
2024-07-19drm/panic: Add drm_panic_is_enabled()Jocelyn Falempe
It allows to check if the drm device supports drm_panic. Prepare the work to have better integration with fbcon and vtconsole. Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240717090102.968152-2-jfalempe@redhat.com
2024-07-19drm/stm: ltdc: remove reload interruptYannick Fertre
The reload interrupt is not used by the driver. To avoid unnecessary calls of the interrupt routine, don't enable it. Solve small typo and add mask to simplify the driver. Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240712131453.98597-1-yannick.fertre@foss.st.com Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
2024-07-19drm/stm: ltdc: add mask for lxcr registerYannick Fertre
The purpose of this mask is to simplify writing to the lxcr register and not to forget any fields. Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240712131423.98405-1-yannick.fertre@foss.st.com Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
2024-07-19drm/stm: ltdc: reset plane transparency after plane disableYannick Fertre
The plane's opacity should be reseted while the plane is disabled. It prevents from seeing a possible global or layer background color set earlier. Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240712131344.98113-1-yannick.fertre@foss.st.com Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
2024-07-19drm/mgag200: Implement struct drm_crtc_funcs.get_vblank_timestampThomas Zimmermann
Implement struct drm_crtc_funcs.get_vblank_timestamp with the DRM helper drm_crtc_vblank_helper_get_vblank_timestamp() with its helper get_scanout_position. Read the scanout position from the MGAREG_VCOUNT register. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240718104551.575912-8-tzimmermann@suse.de
2024-07-19drm/mgag200: Add vblank supportThomas Zimmermann
There's no VBLANK interrupt on Matrox chipsets. The workaround that is being used here and in other free Matrox drivers is to program <linecomp> to the value of <vblkstr> and enable the VLINE interrupt. This triggers an interrupt at the time when VBLANK begins. VLINE uses separate registers for enabling and clearing pending interrupts. No extra synchronization between irq handler and the rest of the driver is required. v6: - clear VLINE status bit before registering IRQ (Jocelyn) v5: - disable all interrupts before registering IRQ (Jocelyn) - don't read from ICLEAR (Jocelyn) v4: - recreate patch on latest upstream - use devm_request_irq() for managed cleanup - fail if vblanking cannot be initialized - rename register constants (Sam, Emil) - clear interrupt before registering handler (Ville) - move <linecomp> programming into separate commit - set <linecomp> to <vblkstr> - fix typo in commit message v3: - set <linecomp> to <vdisplay> + 1 to trigger at VBLANK - expand comment on linecomp v2: - only signal vblank on CRTC 0 - use constants for registers and fields - set VLINECLR before enabling interrupt - test against STATUS and IEN in irq handler - coding-style fixes Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240718104551.575912-7-tzimmermann@suse.de
2024-07-19drm/xe/vf: Fix register value lookupMichal Wajdeczko
We should use the number of actual entries stored in the runtime register buffer, not the maximum number of entries that this buffer can hold, otherwise bsearch() may fail and we may miss the data and wrongly report unexpected access to some registers. Fixes: 4edadc41a3a4 ("drm/xe/vf: Use register values obtained from the PF") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Piotr Piórkowski <piotr.piorkowski@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240718203155.486-1-michal.wajdeczko@intel.com
2024-07-19drm/mgag200: Add dedicted variable for <linecomp> fieldThomas Zimmermann
Replace the line-compare value of <vdispend> with a dedicated variable <linecomp>. Improves readability and prepares for vblank support. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240718104551.575912-6-tzimmermann@suse.de
2024-07-19drm/mgag200: Add dedicated variables for blanking fieldsThomas Zimmermann
Represent fields for horizontal and vertical blanking with <hblkstr>, <hblkend>, <vblkstr> and <vblkend>. Aligns the code with the Matrox programming manuals. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240718104551.575912-5-tzimmermann@suse.de
2024-07-19drm/mgag200: Use adjusted mode values for CRTCsThomas Zimmermann
Use the values with the crtc_ prefix from struct drm_display_mode to program hardware. The DRM core adjusted these values to the requirements of CRTC hardware. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240718104551.575912-4-tzimmermann@suse.de
2024-07-19drm/mgag200: Align register field names with documentationThomas Zimmermann
In mgag200_set_mode_regs(), align variable names with the field names given in the Matrox programming manuals. Makes the code and docs grep- able. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240718104551.575912-3-tzimmermann@suse.de
2024-07-19drm/mgag200: Use hexadecimal register indecesThomas Zimmermann
In mgag200_set_mode_regs(), use hexadecimal indices for accessing registers. Aligns the code with the register indices in the Matrox programming manuals. Also convert to lower-case hexadecimal values. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240718104551.575912-2-tzimmermann@suse.de
2024-07-19arm64: qcom: don't select HAVE_PWRCTL when PCI=nArnd Bergmann
The new HAVE_PWRCTL option is defined in the PCI subsystem, so selecting it unconditionally when PCI is disabled causes a harmless warning: WARNING: unmet direct dependencies detected for HAVE_PWRCTL Depends on [n]: PCI [=n] Selected by [y]: - ARCH_QCOM [=y] Add 'if PCI' in the qualcomm platform to hide the warning. Fixes: ed70aaac7c35 ("Kconfig: reduce the amount of power sequencing noise") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-07-19drm/xe: Fix use after free when client stats are capturedUmesh Nerlige Ramappa
xe_file_close triggers an asynchronous queue cleanup and then frees up the xef object. Since queue cleanup flushes all pending jobs and the KMD stores client usage stats into the xef object after jobs are flushed, we see a use-after-free for the xef object. Resolve this by taking a reference to xef from xe_exec_queue. While at it, revert an earlier change that contained a partial work around for this issue. v2: - Take a ref to xef even for the VM bind queue (Matt) - Squash patches relevant to that fix and work around (Lucas) v3: Fix typo (Lucas) Fixes: ce62827bc294 ("drm/xe: Do not access xe file when updating exec queue run_ticks") Fixes: 6109f24f87d7 ("drm/xe: Add helper to accumulate exec queue runtime") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1908 Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240718210548.3580382-5-umesh.nerlige.ramappa@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-07-19drm/xe: Take a ref to xe file when user creates a VMUmesh Nerlige Ramappa
Take a reference to xef when user creates the VM and put the reference when user destroys the VM. Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240718210548.3580382-4-umesh.nerlige.ramappa@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-07-19drm/xe: Add ref counting for xe_fileUmesh Nerlige Ramappa
Add ref counting for xe_file. v2: - Add kernel doc for exported functions (Matt) - Instead of xe_file_destroy, export the get/put helpers (Lucas) v3: Fixup the kernel-doc format and description (Matt, Lucas) Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240718210548.3580382-3-umesh.nerlige.ramappa@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-07-19drm/xe: Move part of xe_file cleanup to a helperUmesh Nerlige Ramappa
In order to make xe_file ref counted, move destruction of xe_file members to a helper. v2: Move xe_vm_close_and_put back into xe_file_close (Matt) Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240718210548.3580382-2-umesh.nerlige.ramappa@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-07-19drm/ast: Fix black screen after resumeJammy Huang
Suspend will disable pcie device. Thus, resume should do full hw initialization again. Add some APIs to ast_drm_thaw() before ast_post_gpu() to fix the issue. v2: - fix function-call arguments Fixes: 5b71707dd13c ("drm/ast: Enable and unlock device access early during init") Reported-by: Cary Garrett <cogarre@gmail.com> Closes: https://lore.kernel.org/dri-devel/8ce1e1cc351153a890b65e62fed93b54ccd43f6a.camel@gmail.com/ Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.6+ Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240718030352.654155-1-jammy_huang@aspeedtech.com
generated by cgit (git 2.34.1) at 2025-09-16 03:17:26 +0000