summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-07-24Merge branch 'linux-4.13' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
nouveau regression fixes. * 'linux-4.13' of git://github.com/skeggsb/linux: drm/nouveau/kms: remove call to drm_crtc_vblank_off() during unload/suspend drm/nouveau/kms/nv50: update vblank state in response to modeset actions drm/nouveau/disp: add tv encoders to output resource mapping drm/nouveau/i2c/gf119-: add support for address-only transactions
2017-07-23Merge tag 'iio-fixes-for-4.13a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes for the 4.13 cycle. * ad2s1210 - Fix negative angular velocity reads (identified by a gcc 7 warning) * aspeed-adc - Wait for initialization sequence to finish before enabling channels. Without it no channels work. * axp288 - Revert a patch that dropped some bogus register mods. No one is entirely sure why but it breaks charging on some devices. - Fix GPADC pin read returning 0. Turns out a small sleep is needed. * bmc150 - Make sure device is restored to normal state after suspend / resume cycle. Otherwise, simple sysfs reads are broken. * tsl2563 - fix wrong event code. * st-accel - add spi 3-wire support. Needed to fix the lsm303agr accelerometer which only had 3 wires in all cases. Side effect is to enable optional 3-wire support for other devices. * st-pressure - disable multiread by default for LPS22HB (only effects SPI) * sun4i-gpadc-iio - fix unbalanced irq enable / disable * vf610 - Fix VALT slection for REFSEL bits - ensures we are using the right reference pins.
2017-07-23Merge 4.13-rc2 into staging-nextGreg Kroah-Hartman
This resolves a merge issue and gets the vmbox drm driver into this branch to be able to start taking fixes for it... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-24drm/nouveau/kms: remove call to drm_crtc_vblank_off() during unload/suspendBen Skeggs
These on()/off() calls should be done as a result of modesetting actions, and as we shut down all heads already on unload/suspend, it's pointless to call off() again. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-07-24drm/nouveau/kms/nv50: update vblank state in response to modeset actionsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-07-24drm/nouveau/disp: add tv encoders to output resource mappingBen Skeggs
We don't support them on G80, but we need to add them to the mapping to avoid triggering a WARN_ON() on GPUs where the ports are present. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-07-24drm/nouveau/i2c/gf119-: add support for address-only transactionsBen Skeggs
Since switching the I2C-over-AUX helpers, there have been regressions on some display combinations due to us not having support for "address only" transactions. This commits enables support for them for GF119 and newer. Earlier GPUs have been reverted to a custom I2C-over-AUX algorithm. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-07-24drm/rockchip: fix Kconfig dependenciesArnd Bergmann
A bug that I had fixed earlier just came back, with CONFIG_EXTCON=m, the rockchip drm driver will fail to link: drivers/gpu/drm/rockchip/cdn-dp-core.o: In function `cdn_dp_get_port_lanes': cdn-dp-core.c:(.text.cdn_dp_get_port_lanes+0x30): undefined reference to `extcon_get_state' cdn-dp-core.c:(.text.cdn_dp_get_port_lanes+0x6c): undefined reference to `extcon_get_property' drivers/gpu/drm/rockchip/cdn-dp-core.o: In function `cdn_dp_check_sink_connection': cdn-dp-core.c:(.text.cdn_dp_check_sink_connection+0x80): undefined reference to `extcon_get_state' drivers/gpu/drm/rockchip/cdn-dp-core.o: In function `cdn_dp_enable': cdn-dp-core.c:(.text.cdn_dp_enable+0x748): undefined reference to `extcon_get_property' The problem is that that the sub-drivers are now all linked into the main rockchip drm module, which breaks all the Kconfig dependencies that are specified in the options for those sub-drivers. This clarifies the dependency to ensure that we can only turn on the DP driver when EXTCON is reachable. As the 'select' statements can now cause additional options to become built-in when they should be loadable modules, I'm moving those into the main driver config option. The dependency on DRM_ROCKCHIP can be reduced into a single 'if' statement here for brevity, but this has no functional effect. Fixes: b6705157b2db ("drm/rockchip: add extcon dependency for DP") Fixes: 8820b68bd378 ("drm/rockchip: Refactor the component match logic.") Link: https://patchwork.kernel.org/patch/9648761/ Acked-by: Guenter Roeck <groeck@chromium.org> Tested-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Yao <mark.yao@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170721211214.3386387-1-arnd@arndb.de
2017-07-23Linux 4.13-rc2v4.13-rc2Linus Torvalds
2017-07-23Properly alphabetize MAINTAINERS fileLinus Torvalds
This adds a perl script to actually parse the MAINTAINERS file, clean up some whitespace in it, warn about errors in it, and then properly sort the end result. My perl-fu is atrocious, so the script has basically been created by randomly putting various characters in a pile, mixing them around, and then looking it the end result does anything interesting when used as a perl script. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-23Fix up MAINTAINERS file problemsLinus Torvalds
Prepping for scripting the MAINTAINERS file cleanup (and possible split) showed a couple of cases where the headers for a couple of entries were bogus. There's a few different kinds of bogosities: - the X-GENE SOC EDAC case was confused and split over two lines - there were four entries for "GREYBUS PROTOCOLS DRIVERS" that were all different things. - the NOKIA N900 CAMERA SUPPORT" was duplicated all of which were more obvious when you started doing associative arrays in perl to track these things by the header (so that we can alphabetize this thing properly, and so that we might split it up by the data too). Cc: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-23parisc: regenerate defconfig filesHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2017-07-23parisc: pdc_stable: constify attribute_group structures.Arvind Yadav
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2017-07-23parisc: Merge millicode routines via linker scriptHelge Deller
When compiling the 4.13-rc kernel I got those linker errors: libgcc2.c:(.text+0x110): relocation truncated to fit: R_PARISC_PCREL22F against symbol `$$divU' defined in .text.div section in /usr/lib/gcc/hppa64-linux-gnu/4.9.2/libgcc.a(_divU.o) hppa64-linux-gnu-ld: /usr/lib/gcc/hppa64-linux-gnu/4.9.2/libgcc.a(_moddi3.o)(.text+0x174): cannot reach $$divU Avoid such errors by bundling the millicode routines in the linker script. Signed-off-by: Helge Deller <deller@gmx.de>
2017-07-23parisc: Disable further stack checks when panic occurs during stack checkHelge Deller
Before the irq handler detects a low stack and then panics the kernel, disable further stack checks to avoid recursive panics. Reported-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2017-07-23Merge tag 'for-linus-4.13b-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Some fixes and cleanups for running under Xen" * tag 'for-linus-4.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: don't online new memory initially xen/x86: fix cpu hotplug xen/grant-table: log the lack of grants xen/x86: Don't BUG on CPU0 offlining
2017-07-23cgroup: fix error return value from cgroup_subtree_control()Tejun Heo
While refactoring, f7b2814bb9b6 ("cgroup: factor out cgroup_{apply|finalize}_control() from cgroup_subtree_control_write()") broke error return value from the function. The return value from the last operation is always overridden to zero. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-23iio: aspeed-adc: wait for initial sequence.Mykola Kostenok
This patch enables adc engine at initialization time and waits for the initial sequence completion before enabling adc channels. Without this code adc channels are not functional and shows zeros for all connected channels. Tested on mellanox msn platform. v1 -> v2: Pointed by Rick Altherr: - Wait init sequence code enabled by bool from OF match table. Signed-off-by: Mykola Kostenok <c_mykolak@mellanox.com> Reviewed-by: Rick Altherr <raltherr@google.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-23IB/ipoib: Notify on modify QP failure only when relevantErez Shitrit
Modify QP can fail and it can be acceptable, like when moving from RST to ERR state, all the rest are not acceptable and a message to the log should be printed. The current code prints on all failures and many messages like: "Failed to modify QP to ERROR state" appear, even when supported by the state machine of the QP object. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23Revert "IB/core: Allow QP state transition from reset to error"Leon Romanovsky
The commit ebc9ca43e1d5 ("IB/core: Allow QP state transition from reset to error") allowed transition from Reset to Error state for the QPs. This behavior doesn't follow the IBTA specification 1.3, which in 10.3.1 QUEUE PAIR AND EE CONTEXT STATES section. The quote from the spec: "An error can be forced from any state, except Reset, with the Modify QP/EE Verb." Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2017-07-23IB/ipoib: Remove double pointer assigningLeon Romanovsky
There is no need to assign "p" pointer twice. This patch fixes the following smatch warning: drivers/infiniband/ulp/ipoib/ipoib_cm.c:517 ipoib_cm_rx_handler() warn: missing break? reassigning 'p->id' Fixes: 839fcaba355a ("IPoIB: Connected mode experimental support") Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2017-07-23IB/ipoib: Clean error paths in add portLeon Romanovsky
Refactor error paths in ipoib_add_port() function. The code flow ensures that the function terminates on every error flow and it makes redundant all "else" cases. The functions are called during the flow are returning "result < 0", in case of error, so there is no need to check it explicitly. Fixes: 58e9cc90cda7 ("IB/IPoIB: Fix bad error flow in ipoib_add_port()") Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2017-07-23IB/ipoib: Add get statistics support to SRIOV VFFeras Daoud
Add SRIOV VF support to get traffic statistics. Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23IB/ipoib: Add multicast packets statisticsAlex Vesker
Update the multicast counter when multicast packets are received and provide this information through ethtool support. Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23IB/ipoib: Set IPOIB_NEIGH_TBL_FLUSH after flushed completion initializationFeras Daoud
Set IPOIB_NEIGH_TBL_FLUSH bit after initializing the neighbor flushed completion, otherwise the garbage collector may signal a completion while it is not initialized yet. Fixes: b63b70d87741 ("IPoIB: Use a private hash table for path lookup in xmit path") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23IB/ipoib: Prevent setting negative values to max_nonsrq_conn_qpAlex Vesker
Don't allow negative values to max_nonsrq_conn_qp. There is no functional impact on a negative value but it is logicically incorrect. Fixes: 68e995a29572 ("IPoIB/cm: Add connected mode support for devices without SRQs") Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23IB/ipoib: Make sure no in-flight joins while leaving that mcastErez Shitrit
While cleaning neighs and there is a send-only mcast neigh, the driver should wait to finish its join process before trying to remove it. Without this patch, we will see messages like: "ipoib_mcast_leave on an in-flight join" and unexpected results in the join_complete. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23IB/ipoib: Use cancel_delayed_work_sync when neededErez Shitrit
The work mcast_task can re-queue itself, so instead of doing cancel && flush_workqueue, that still can leave a queued task on the air, use cancel_delayed_work_sync. Also, no need to use lock over the cancel, the original lock was due to bit assignment setting (IPOIB_MCAST_RUN) that is not in use anymore. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23IB/ipoib: Fix race between light events and interface restartFeras Daoud
A potential race between light_event and interface restart may attach multicast group to an already attached QP. Scenario: light_event flow goes through ipoib_mcast_dev_flush function, if a context switch occurs before calling ipoib_mcast_remove_list, then we may face a situation where the broadcast of the priv is null and the corresponding QP is not detached yet. If an "interface restart" runs during the previous context switch, the following scenario occurs: When the device goes up, ipoib_ib_dev_up function will be called, it will send a new registration request to the broadcast group and then attach the group to the QP that was not detached before. IPOIB_FLUSH_LIGHT INTERFACE RESTART __ipoib_ib_dev_flush | | | | | | | ipoib_mcast_dev_flush | Move mcast list and broadcast to remove_list | | | | | Context Switch--> | | ipoib_ib_dev_down | | | | | ipoib_ib_dev_up | | | | | ipoib_mcast_join_task | allocate new broadcast | | | | | Attach QP to multicast group | | | | | <--Context Switch ipoib_mcast_leave Detach QP from multicast group Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23xen/balloon: don't online new memory initiallyJuergen Gross
When setting up the Xenstore watch for the memory target size the new watch will fire at once. Don't try to reach the configured target size by onlining new memory in this case, as the current memory size will be smaller in almost all cases due to e.g. BIOS reserved pages. Onlining new memory will lead to more problems e.g. undesired conflicts with NVMe devices meant to be operated as block devices. Instead remember the difference between target size and current size when the watch fires for the first time and apply it to any further size changes, too. In order to avoid races between balloon.c and xen-balloon.c init calls do the xen-balloon.c initialization from balloon.c. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-07-23xen/x86: fix cpu hotplugJuergen Gross
Commit dc6416f1d711eb4c1726e845d653235dcaae12e1 ("xen/x86: Call cpu_startup_entry(CPUHP_AP_ONLINE_IDLE) from xen_play_dead()") introduced an error leading to a stack overflow of the idle task when a cpu was brought offline/online many times: by calling cpu_startup_entry() instead of returning at the end of xen_play_dead() do_idle() would be entered again and again. Don't use cpu_startup_entry(), but cpuhp_online_idle() instead allowing to return from xen_play_dead(). Cc: <stable@vger.kernel.org> # 4.12 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-07-23xen/grant-table: log the lack of grantsWengang Wang
log a message when we enter this situation: 1) we already allocated the max number of available grants from hypervisor and 2) we still need more (but the request fails because of 1)). Sometimes the lack of grants causes IO hangs in xen_blkfront devices. Adding this log would help debuging. Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-07-23xen/x86: Don't BUG on CPU0 offliningVitaly Kuznetsov
CONFIG_BOOTPARAM_HOTPLUG_CPU0 allows to offline CPU0 but Xen HVM guests BUG() in xen_teardown_timer(). Remove the BUG_ON(), this is probably a leftover from ancient times when CPU0 hotplug was impossible, it works just fine for HVM. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-07-22iio: Convert to using %pOF instead of full_nameRob Herring
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: linux-iio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-22Staging: iio: adc: ad7280a.c: Fixed Macro argument reuseJaya Durga
CHECK: Macro argument reuse 'addr' - possible side-effects? convert AD7280A_DEVADDR to ad7280a_devaddr static function to fix checkpath check v3: small style changes Signed-off-by: Jaya Durga <rjdurga@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-22dt-bindings: iio: humidity: hts221: support active-low interruptsLorenzo Bianconi
Update hts221 device binding with active-low interrupts support (IRQ_TYPE_LEVEL_LOW and IRQ_TYPE_EDGE_FALLING). Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-22iio: humidity: hts221: support active-low interruptsLorenzo Bianconi
Add support for active low interrupts (IRQF_TRIGGER_LOW and IRQF_TRIGGER_FALLING). Configure the device as active high or low according to the requested irq line. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-22iio: humidity: hts221: squash hts221_power_on/off in hts221_set_enableLorenzo Bianconi
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-22iio: humidity: hts221: avoid useless ODR reconfigurationLorenzo Bianconi
Configure sensor ODR just in hts221_write_raw() in order to avoid to set device sample rate multiple times. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-22iio: humidity: hts221: do not overwrite reserved data during power-downLorenzo Bianconi
GENMASK(6, 3) in CTRL_REG1 and GENMASK(6, 2) in CTRL_REG2 are marked reserved. Do not changed the original value (not declared in the datasheet) during power-down/suspend routines. Fixes: e4a70e3e7d84 (iio: humidity: add support to hts221 rh/temp device) Fixes: b7079eeac5da (iio: humidity: hts221: add power management support) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-22iio: humidity: hts221: move BDU configuration in probe routineLorenzo Bianconi
Enable Block Data Update in hts221_probe() in order to avoid to reconfigure it every time the sensor is enabled Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-22iio: humidity: hts221: refactor write_with_mask codeLorenzo Bianconi
Move bit-shift in hts221_write_with_mask() instead of coding the shift depth in the configured value. That change will be necessary to fix an issue in device power-down procedure. Simplify hts221_avg_list table management Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-22iio: chemical: ccs811: Add support for AMS CCS811 VOC sensorNarcisa Ana Maria Vasile
Add support for CCS811 VOC sensor. This patch adds support for reading current and voltage across the sensor and TVOC and equivalent CO2 values. Scale and offset values have been computed according to datasheet: - For current: raw value is in microamps => 0.001 scale to convert to milliamps - For voltage: 1.65V = 1023, therefore 1650mV = 1023 => 1650.0/1023 = 1.612903 scale to convert to millivolts - For eCO2: raw value range is from 400ppm to 8192ppm. => (val - 400) * (100 - 0) / (8192 - 400) + 0 = (val - 400) * 0.01283367 => offset: -400, scale = 0.012834 to get a percentage value -For TVOC: raw value range is from 0ppb to 1187ppb. => (val - 0) * 100 / (1187 - 0) + 0 = val * 0.0842459 => scale = 0.084246 for getting a percentage value Cc: Daniel Baluta <daniel.baluta@gmail.com> Cc: Alison Schofield <amsfield22@gmail.com> Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-22nbd: only set sndtimeo if we have a timeout setJosef Bacik
A user reported that he was getting immediate disconnects with my sndtimeo patch applied. This is because by default the OSS nbd client doesn't set a timeout, so we end up setting the sndtimeo to 0, which of course means we have send errors a lot. Instead only set our sndtimeo if the user specified a timeout, otherwise we'll just wait forever like we did previously. Fixes: dc88e34d69d8 ("nbd: set sk->sk_sndtimeo for our sockets") Reported-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-22nbd: take tx_lock before disconnectingJosef Bacik
We need to take the tx_lock so we don't interleave our disconnect request between real data going down the wire. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-22nbd: allow multiple disconnects to be sentJosef Bacik
There's no reason to limit ourselves to one disconnect message per socket. Sometimes networks do strange things, might as well let sysadmins hit the panic button as much as they want. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-22Merge tag 'hwmon-for-linus-v4.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Avoid buffer overruns in applesmc driver" * tag 'hwmon-for-linus-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (applesmc) Avoid buffer overruns
2017-07-22Merge tag 'tty-4.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small tty and serial driver fixes for 4.13-rc2. Nothing huge at all, a revert of a patch that turned out to break things, a fix up for a new tty ioctl we added in 4.13-rc1 to get the uapi definition correct, and a few minor serial driver fixes for reported issues. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix TIOCGPTPEER ioctl definition tty: hide unused pty_get_peer function tty: serial: lpuart: Fix the logic for detecting the 32-bit type UART serial: imx: Prevent TX buffer PIO write when a DMA has been started Revert "serial: imx-serial - move DMA buffer configuration to DT" serial: sh-sci: Uninitialized variables in sysfs files serial: st-asc: Potential error pointer dereference
2017-07-22Merge tag 'char-misc-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 4.13-rc2. All fix reported problems with 4.13-rc1 or older kernels (like the binder fixes). Full details in the shortlog. All have been in linux-next with no reported issues" * tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: w1: omap-hdq: fix error return code in omap_hdq_probe() regmap: regmap-w1: Fix build troubles w1: Fix slave count on 1-Wire bus (resend) mux: mux-core: unregister mux_class in mux_exit() mux: remove the Kconfig question for the subsystem nvmem: rockchip-efuse: amend compatible rk322x-efuse to rk3228-efuse drivers/fsi: fix fsi_slave_mode prototype fsi: core: register with postcore_initcall thunderbolt: Correct access permissions for active NVM contents vmbus: re-enable channel tasklet spmi: pmic-arb: Always allocate ppid_to_apid table MAINTAINERS: Add entry for SPMI subsystem spmi: Include OF based modalias in device uevent binder: Use wake up hint for synchronous transactions. binder: use group leader instead of open thread Revert "android: binder: Sanity check at binder ioctl"
2017-07-22Merge tag 'usb-4.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 4.13-rc2. The usual batch, gadget fixes for reported issues, as well as xhci fixes, and a small random collection of other fixes for reported issues. All have been in linux-next with no reported issues" * tag 'usb-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) xhci: fix memleak in xhci_run() usb: xhci: fix spinlock recursion for USB2 test mode xhci: fix 20000ms port resume timeout usb: xhci: Issue stop EP command only when the EP state is running xhci: Bad Ethernet performance plugged in ASM1042A host xhci: Fix NULL pointer dereference when cleaning up streams for removed host usb: renesas_usbhs: gadget: disable all eps when the driver stops usb: renesas_usbhs: fix usbhsc_resume() for !USBHSF_RUNTIME_PWCTRL usb: gadget: udc: renesas_usb3: protect usb3_ep->started in usb3_start_pipen() usb: gadget: udc: renesas_usb3: fix zlp transfer by the dmac usb: gadget: udc: renesas_usb3: fix free size in renesas_usb3_dma_free_prd() usb: gadget: f_uac2: endianness fixes. usb: gadget: f_uac1: endianness fixes. include: usb: audio: specify exact endiannes of descriptors usb: gadget: udc: start_udc() can be static usb: dwc2: gadget: On USB RESET reset device address to zero usb: storage: return on error to avoid a null pointer dereference usb: typec: include linux/device.h in ucsi.h USB: cdc-acm: add device-id for quirky printer usb: dwc3: gadget: only unmap requests from DMA if mapped ...
generated by cgit (git 2.34.1) at 2025-09-21 08:06:04 +0000