summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-12-14Merge tag 's390-5.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - Add support for the hugetlb_cma command line option to allocate gigantic hugepages using CMA - Add arch_get_random_long() support. - Add ap bus userspace notifications. - Increase default size of vmalloc area to 512GB and otherwise let it increase dynamically by the size of physical memory. This should fix all occurrences where the vmalloc area was not large enough. - Completely get rid of set_fs() (aka select SET_FS) and rework address space handling while doing that; making address space handling much more simple. - Reimplement getcpu vdso syscall in C. - Add support for extended SCLP responses (> 4k). This allows e.g. to handle also potential large system configurations. - Simplify KASAN by removing 3-level page table support and only supporting 4-levels from now on. - Improve debug-ability of the kernel decompressor code, which now prints also stack traces and symbols in case of problems to the console. - Remove more power management leftovers. - Other various fixes and improvements all over the place. * tag 's390-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (62 commits) s390/mm: add support to allocate gigantic hugepages using CMA s390/crypto: add arch_get_random_long() support s390/smp: perform initial CPU reset also for SMT siblings s390/mm: use invalid asce for user space when switching to init_mm s390/idle: fix accounting with machine checks s390/idle: add missing mt_cycles calculation s390/boot: add build-id to decompressor s390/kexec_file: fix diag308 subcode when loading crash kernel s390/cio: fix use-after-free in ccw_device_destroy_console s390/cio: remove pm support from ccw bus driver s390/cio: remove pm support from css-bus driver s390/cio: remove pm support from IO subchannel drivers s390/cio: remove pm support from chsc subchannel driver s390/vmur: remove unused pm related functions s390/tape: remove unsupported PM functions s390/cio: remove pm support from eadm-sch drivers s390: remove pm support from console drivers s390/dasd: remove unused pm related functions s390/zfcp: remove pm support from zfcp driver s390/ap: let bus_register() add the AP bus sysfs attributes ...
2020-12-14Merge tag 'm68k-for-v5.11-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - fix WARNING splat in pmac_zilog driver - fix ADB input device regression - assume maintainership for adb-iop and via-macii - minor fixes and improvements - defconfig updates * tag 'm68k-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: MAINTAINERS: Update m68k Mac entry macintosh/adb-iop: Send correct poll command macintosh/adb-iop: Always wait for reply message from IOP m68k: Fix WARNING splat in pmac_zilog driver m68k: Add a missing ELF_DETAILS in link script m68k: Drop redundant NOTES in link script m68k: mac: Update Kconfig help m68k: mac: Remove redundant VIA register writes m68k: mac: Remove dead code m68k: mac: Refactor iop_preinit() and iop_init() m68k: defconfig: Enable KUnit tests m68k: defconfig: Update defconfigs for v5.10-rc1 m68k: Remove unused mach_max_dma_address m68k: Avoid xchg() warning
2020-12-14Merge branch 'radeon-fixes' (Radeon and amdgpu fixes)Linus Torvalds
Merge radeon and amdgpu fixes for boot problems. The drm merge ended up causing my AMD workstation to not boot. When reporting this, Alex Deucher correctly blamed commit 28a68f828266 ("drm/radeon/ttm: use multihop") and pointed to these two fixes that were already in the drm-misc tree: 95e3d610d35c ("drm/radeon: fix check order in radeon_bo_move") aefec40938e4 ("drm/amdgpu: fix check order in amdgpu_bo_move") Since I hate doing merges with a known-bad base, I've cherry-picked these fixes into a branch of their own, just to be able to continue my merge window. The original commits will eventually come in as duplicates through the normal channels, but in the meantime we have a tree that isn't broken with basically every AMD GPU out there. Acked-by: Alex Deucher <alexdeucher@gmail.com> * cherry-picked from the drm-misc tree: drm/radeon: fix check order in radeon_bo_move drm/amdgpu: fix check order in amdgpu_bo_move
2020-12-14drm/radeon: fix check order in radeon_bo_moveChristian König
Reorder the code to fix checking if blitting is available. Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 28a68f828266 ("drm/radeon/ttm: use multihop") Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/403847/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-14drm/amdgpu: fix check order in amdgpu_bo_moveChristian König
Reorder the code to fix checking if blitting is available. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/401019/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextJakub Kicinski
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next 1) Missing dependencies in NFT_BRIDGE_REJECT, from Randy Dunlap. 2) Use atomic_inc_return() instead of atomic_add_return() in IPVS, from Yejune Deng. 3) Simplify check for overquota in xt_nfacct, from Kaixu Xia. 4) Move nfnl_acct_list away from struct net, from Miao Wang. 5) Pass actual sk in reject actions, from Jan Engelhardt. 6) Add timeout and protoinfo to ctnetlink destroy events, from Florian Westphal. 7) Four patches to generalize set infrastructure to support for multiple expressions per set element. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next: netfilter: nftables: netlink support for several set element expressions netfilter: nftables: generalize set extension to support for several expressions netfilter: nftables: move nft_expr before nft_set netfilter: nftables: generalize set expressions support netfilter: ctnetlink: add timeout and protoinfo to destroy events netfilter: use actual socket sk for REJECT action netfilter: nfnl_acct: remove data from struct net netfilter: Remove unnecessary conversion to bool ipvs: replace atomic_add_return() netfilter: nft_reject_bridge: fix build errors due to code movement ==================== Link: https://lore.kernel.org/r/20201212230513.3465-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-12-14 1) Expose bpf_sk_storage_*() helpers to iterator programs, from Florent Revest. 2) Add AF_XDP selftests based on veth devs to BPF selftests, from Weqaar Janjua. 3) Support for finding BTF based kernel attach targets through libbpf's bpf_program__set_attach_target() API, from Andrii Nakryiko. 4) Permit pointers on stack for helper calls in the verifier, from Yonghong Song. 5) Fix overflows in hash map elem size after rlimit removal, from Eric Dumazet. 6) Get rid of direct invocation of llc in BPF selftests, from Andrew Delgadillo. 7) Fix xsk_recvmsg() to reorder socket state check before access, from Björn Töpel. 8) Add new libbpf API helper to retrieve ring buffer epoll fd, from Brendan Jackman. 9) Batch of minor BPF selftest improvements all over the place, from Florian Lehner, KP Singh, Jiri Olsa and various others. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (31 commits) selftests/bpf: Add a test for ptr_to_map_value on stack for helper access bpf: Permits pointers on stack for helper calls libbpf: Expose libbpf ring_buffer epoll_fd selftests/bpf: Add set_attach_target() API selftest for module target libbpf: Support modules in bpf_program__set_attach_target() API selftests/bpf: Silence ima_setup.sh when not running in verbose mode. selftests/bpf: Drop the need for LLVM's llc selftests/bpf: fix bpf_testmod.ko recompilation logic samples/bpf: Fix possible hang in xdpsock with multiple threads selftests/bpf: Make selftest compilation work on clang 11 selftests/bpf: Xsk selftests - adding xdpxceiver to .gitignore selftests/bpf: Drop tcp-{client,server}.py from Makefile selftests/bpf: Xsk selftests - Bi-directional Sockets - SKB, DRV selftests/bpf: Xsk selftests - Socket Teardown - SKB, DRV selftests/bpf: Xsk selftests - DRV POLL, NOPOLL selftests/bpf: Xsk selftests - SKB POLL, NOPOLL selftests/bpf: Xsk selftests framework bpf: Only provide bpf_sock_from_file with CONFIG_NET bpf: Return -ENOTSUPP when attaching to non-kernel BTF xsk: Validate socket state in xsk_recvmsg, prior touching socket members ... ==================== Link: https://lore.kernel.org/r/20201214214316.20642-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14Input: da7280 - fix spelling mistake "sequemce" -> "sequence"Colin Ian King
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201214223109.82924-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-14Input: cyapa_gen6 - fix out-of-bounds stack accessArnd Bergmann
gcc -Warray-bounds warns about a serious bug in cyapa_pip_retrieve_data_structure: drivers/input/mouse/cyapa_gen6.c: In function 'cyapa_pip_retrieve_data_structure.constprop': include/linux/unaligned/access_ok.h:40:17: warning: array subscript -1 is outside array bounds of 'struct retrieve_data_struct_cmd[1]' [-Warray-bounds] 40 | *((__le16 *)p) = cpu_to_le16(val); drivers/input/mouse/cyapa_gen6.c:569:13: note: while referencing 'cmd' 569 | } __packed cmd; | ^~~ Apparently the '-2' was added to the pointer instead of the value, writing garbage into the stack next to this variable. Fixes: c2c06c41f700 ("Input: cyapa - add gen6 device module support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201026161332.3708389-1-arnd@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-14libceph: drop ceph_auth_{create,update}_authorizer()Ilya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph, ceph: make use of __ceph_auth_get_authorizer() in msgr1Ilya Dryomov
This shouldn't cause any functional changes. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph, ceph: implement msgr2.1 protocol (crc and secure modes)Ilya Dryomov
Implement msgr2.1 wire protocol, available since nautilus 14.2.11 and octopus 15.2.5. msgr2.0 wire protocol is not implemented -- it has several security, integrity and robustness issues and therefore considered deprecated. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: introduce connection modes and ms_mode optionIlya Dryomov
msgr2 supports two connection modes: crc (plain) and secure (on-wire encryption). Connection mode is picked by server based on input from client. Introduce ms_mode option: ms_mode=legacy - msgr1 (default) ms_mode=crc - crc mode, if denied fail ms_mode=secure - secure mode, if denied fail ms_mode=prefer-crc - crc mode, if denied agree to secure mode ms_mode=prefer-secure - secure mode, if denied agree to crc mode ms_mode affects all connections, we don't separate connections to mons like it's done in userspace with ms_client_mode vs ms_mon_client_mode. For now the default is legacy, to be flipped to prefer-crc after some time. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph, rbd: ignore addr->type while comparing in some casesIlya Dryomov
For libceph, this ensures that libceph instance sharing (share option) continues to work. For rbd, this avoids blocklisting alive lock owners (locker addr is always LEGACY, while watcher addr is ANY in nautilus). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph, ceph: get and handle cluster maps with addrvecsIlya Dryomov
In preparation for msgr2, make the cluster send us maps with addrvecs including both LEGACY and MSGR2 addrs instead of a single LEGACY addr. This means advertising support for SERVER_NAUTILUS and also some older features: SERVER_MIMIC, MONENC and MONNAMES. MONNAMES and MONENC are actually pre-argonaut, we just never updated ceph_monmap_decode() for them. Decoding is unconditional, see commit 23c625ce3065 ("libceph: assume argonaut on the server side"). SERVER_MIMIC doesn't bear any meaning for the kernel client. Since ceph_decode_entity_addrvec() is guarded by encoding version checks (and in msgr2 case it is guarded implicitly by the fact that server is speaking msgr2), we assume MSG_ADDR2 for it. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: factor out finish_auth()Ilya Dryomov
In preparation for msgr2, factor out finish_auth() so it is suitable for both existing MAuth message based authentication and upcoming msgr2 authentication exchange. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: drop ac->ops->name fieldIlya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: amend cephx init_protocol() and build_request()Ilya Dryomov
In msgr2, initial authentication happens with an exchange of msgr2 control frames -- MAuth message and struct ceph_mon_request_header aren't used. Make that optional. Stop reporting cephx protocol as "x". Use "cephx" instead. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph, ceph: incorporate nautilus cephx changesIlya Dryomov
- request service tickets together with auth ticket. Currently we get auth ticket via CEPHX_GET_AUTH_SESSION_KEY op and then request service tickets via CEPHX_GET_PRINCIPAL_SESSION_KEY op in a separate message. Since nautilus, desired service tickets are shared togther with auth ticket in CEPHX_GET_AUTH_SESSION_KEY reply. - propagate session key and connection secret, if any. In preparation for msgr2, update handle_reply() and verify_authorizer_reply() auth ops to propagate session key and connection secret. Since nautilus, if secure mode is negotiated, connection secret is shared either in CEPHX_GET_AUTH_SESSION_KEY reply (for mons) or in a final authorizer reply (for osds and mdses). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: safer en/decoding of cephx requests and repliesIlya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: more insight into ticket expiry and invalidationIlya Dryomov
Make it clear that "need" is a union of "missing" and "have, but up for renewal" and dout when the ticket goes missing due to expiry or invalidation by client. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: move msgr1 protocol specific fields to its own structIlya Dryomov
A couple whitespace fixups, no functional changes. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: move msgr1 protocol implementation to its own fileIlya Dryomov
A pure move, no other changes. Note that ceph_tcp_recv{msg,page}() and ceph_tcp_send{msg,page}() helpers are also moved. msgr2 will bring its own, more efficient, variants based on iov_iter. Switching msgr1 to them was considered but decided against to avoid subtle regressions. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: separate msgr1 protocol implementationIlya Dryomov
In preparation for msgr2, define internal messenger <-> protocol interface (as opposed to external messenger <-> client interface, which is struct ceph_connection_operations) consisting of try_read(), try_write(), revoke(), revoke_incoming(), opened(), reset_session() and reset_protocol() ops. The semantics are exactly the same as they are now. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: export remaining protocol independent infrastructureIlya Dryomov
In preparation for msgr2, make all protocol independent functions in messenger.c global. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: export zero_pageIlya Dryomov
In preparation for msgr2, make zero_page global. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: rename and export con->flags bitsIlya Dryomov
In preparation for msgr2, move the defines to the header file. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: rename and export con->state statesIlya Dryomov
In preparation for msgr2, rename msgr1 specific states and move the defines to the header file. Also drop state transition comments. They don't cover all possible transitions (e.g. NEGOTIATING -> STANDBY, etc) and currently do more harm than good. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: make con->state an intIlya Dryomov
unsigned long is a leftover from when con->state used to be a set of bits managed with set_bit(), clear_bit(), etc. Save a bit of memory. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: don't export ceph_messenger_{init_fini}() to modulesIlya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: make sure our addr->port is zero and addr->nonce is non-zeroIlya Dryomov
Our messenger instance addr->port is normally zero -- anything else is nonsensical because as a client we connect to multiple servers and don't listen on any port. However, a user can supply an arbitrary addr:port via ip option and the port is currently preserved. Zero it. Conversely, make sure our addr->nonce is non-zero. A zero nonce is special: in combination with a zero port, it is used to blocklist the entire ip. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: factor out ceph_con_get_out_msg()Ilya Dryomov
Move the logic of grabbing the next message from the queue into its own function. Like ceph_con_in_msg_alloc(), this is protocol independent. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: change ceph_con_in_msg_alloc() to take hdrIlya Dryomov
ceph_con_in_msg_alloc() is protocol independent, but con->in_hdr (and struct ceph_msg_header in general) is msgr1 specific. While the struct is deeply ingrained inside and outside the messenger, con->in_hdr field can be separated. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: change ceph_msg_data_cursor_init() to take cursorIlya Dryomov
Make it possible to have local cursors and embed them outside struct ceph_msg. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: handle discarding acked and requeued messages separatelyIlya Dryomov
Make it easier to follow and remove dependency on msgr1 specific CEPH_MSGR_TAG_SEQ. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: drop msg->ack_stamp fieldIlya Dryomov
It is set in process_ack() but never used. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: remove redundant session reset log messageIlya Dryomov
Stick with pr_info message because session reset isn't an error most of the time. When it is (i.e. if the server denies the reconnect attempt), we get a bunch of other pr_err messages. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: clear con->peer_global_seq on RESETSESSIONIlya Dryomov
con->peer_global_seq is part of session state. Clear it when the server tells us to reset, not just in ceph_con_close(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: rename reset_connection() to ceph_con_reset_session()Ilya Dryomov
With just session reset bits left, rename appropriately. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: split protocol reset bits out of reset_connection()Ilya Dryomov
Move protocol reset bits into ceph_con_reset_protocol(), leaving just session reset bits. Note that con->out_skip is now reset on faults. This fixes a crash in the case of a stateful session getting a fault while in the middle of revoking a message. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: don't call reset_connection() on version/feature mismatchesIlya Dryomov
A fault due to a version mismatch or a feature set mismatch used to be treated differently from other faults: the connection would get closed without trying to reconnect and there was a ->bad_proto() connection op for notifying about that. This changed a long time ago, see commits 6384bb8b8e88 ("libceph: kill bad_proto ceph connection op") and 0fa6ebc600bc ("libceph: fix protocol feature mismatch failure path"). Nowadays these aren't any different from other faults (i.e. we try to reconnect even though the mismatch won't resolve until the server is replaced). reset_connection() calls there are rather confusing because reset_connection() resets a session together an individual instance of the protocol. This is cleaned up in the next patch. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: lower exponential backoff delayIlya Dryomov
The current setting allows the backoff to climb up to 5 minutes. This is too high -- it becomes hard to tell whether the client is stuck on something or just in backoff. In userspace, ms_max_backoff is defaulted to 15 seconds. Let's do the same. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph: include middle_len in process_message() doutIlya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14ceph: implement updated ceph_mds_request_head structureJeff Layton
When we added the btime feature in mainline ceph, we had to extend struct ceph_mds_request_args so that it could be set. Implement the same in the kernel client. Rename ceph_mds_request_head with a _old extension, and a union ceph_mds_request_args_ext to allow for the extended size of the new header format. Add the appropriate code to handle both formats in struct create_request_message and key the behavior on whether the peer supports CEPH_FEATURE_FS_BTIME. The gid_list field in the payload is now populated from the saved credential. For now, we don't add any support for setting the btime via setattr, but this does enable us to add that in the future. [ idryomov: break unnecessarily long lines ] Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14ceph: clean up argument lists to __prepare_send_request and __send_requestJeff Layton
We can always get the mdsc from the session, so there's no need to pass it in as a separate argument. Pass the session to __prepare_send_request as well, to prepare for later patches that will need to access it. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14ceph: take a cred reference instead of tracking individual uid/gidJeff Layton
Replace req->r_uid/r_gid with an r_cred pointer and take a reference to that at the point where we previously would sample the two. Use that to populate the uid and gid in the header and release the reference when the request is freed. This should enable us to later add support for sending supplementary group lists in MDS requests. [ idryomov: break unnecessarily long lines ] Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14ceph: don't reach into request header for readdir infoJeff Layton
We already have a pointer to the argument struct in req->r_args. Use that instead of groveling around in the ceph_mds_request_head. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14ceph: set osdmap epoch for setxattrXiubo Li
When setting the file/dir layout, it may need data pool info. So in mds server, it needs to check the osdmap. At present, if mds doesn't find the data pool specified, it will try to get the latest osdmap. Now if pass the osd epoch for setxattr, the mds server can only check this epoch of osdmap. URL: https://tracker.ceph.com/issues/48504 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14ceph: remove redundant assignment to variable iColin Ian King
The variable i is being initialized with a value that is never read and it is being updated later with a new value in a for-loop. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14ceph: add ceph.caps vxattrLuis Henriques
Add a new vxattr that allows userspace to list the caps for a specific directory or file. [ jlayton: change format delimiter to '/' ] Signed-off-by: Luis Henriques <lhenriques@suse.de> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-13 21:39:00 +0000