| Age | Commit message (Collapse) | Author |
|---|
|
When running large numbers of pppoe connections, a bucket size of 16 may
be too small and 256 may be more appropriate. This sacrifices some RAM
but should result in faster processing of incoming PPPoE frames.
On our systems we run upwards of 150 PPPoE connections at any point in
time, and we suspect we're starting to see the effects of this small
number of buckets.
The legal values according to pppoe.c is anything that when 8 is divided
by that results in a modulo of 0, ie, 1, 2, 4 and 8.
The size of the per-underlying-interface structure is:
sizeof(rwlock_t) + sizeof(pppox_sock*) * PPPOE_HASH_SIZE.
Assuming a 64-bit pointer this will result in just over a 2KiB structure
for PPPOE_HASH_BITS=8, which will likely result in a 4KiB allocation,
which for us at least is acceptable.
Not sure what the minimum allocation size is, and thus if values of 1
and 2 truly make sense. Default results in historic sizing and
behaviour.
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the system attempts to sleep while mtk_t7xx is not ready, the driver
cannot put the device to sleep:
[ 12.472918] mtk_t7xx 0000:57:00.0: [PM] Exiting suspend, modem in invalid state
[ 12.472936] mtk_t7xx 0000:57:00.0: PM: pci_pm_suspend(): t7xx_pci_pm_suspend+0x0/0x20 [mtk_t7xx] returns -14
[ 12.473678] mtk_t7xx 0000:57:00.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x1b0 returns -14
[ 12.473711] mtk_t7xx 0000:57:00.0: PM: failed to suspend async: error -14
[ 12.764776] PM: Some devices failed to suspend, or early wake event detected
Mediatek confirmed the device can take a rather long time to complete
its initialization, so wait for up to 20 seconds until init is done.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The cited commit added a stray colon to the 'v' option. That makes the
option work incorrectly.
ex:
tools/testing/selftests/net# ./fib_nexthops.sh -v
(should enable verbose mode, instead it shows help text due to missing arg)
Fixes: 5feba4727395 ("selftests: fib_nexthops: Make ping timeout configurable")
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The XPCS expects clause 73 (copper backplane) autoneg to follow the
ethtool autoneg bit. It actually did that until the blamed
commit inaptly replaced state->an_enabled (coming from ethtool) with
phylink_autoneg_inband() (coming from the device tree or struct
phylink_config), as part of an unrelated phylink_pcs API conversion.
Russell King suggests that state->an_enabled from the original code was
just a proxy for the ethtool Autoneg bit, and that the correct way of
restoring the functionality is to check for this bit in the advertising
mask.
Fixes: 11059740e616 ("net: pcs: xpcs: convert to phylink_pcs_ops")
Link: https://lore.kernel.org/netdev/ZGNt2MFeRolKGFck@shell.armlinux.org.uk/
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In suspend and resume cycle, the removal and rescan of device ends
up in NULL pointer dereference.
During driver initialization, if the ipc_imem_wwan_channel_init()
fails to get the valid device capabilities it returns an error and
further no resource (wwan struct) will be allocated. Now in this
situation if driver removal procedure is initiated it would result
in NULL pointer exception since unallocated wwan struct is dereferenced
inside ipc_wwan_deinit().
ipc_imem_run_state_worker() to handle the called functions return value
and to release the resource in failure case. It also reports the link
down event in failure cases. The user space application can handle this
event to do a device reset for restoring the device communication.
Fixes: 3670970dd8c6 ("net: iosm: shared memory IPC interface")
Reported-by: Samuel Wein PhD <sam@samwein.com>
Closes: https://lore.kernel.org/netdev/20230427140819.1310f4bd@kernel.org/T/
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot triggered the following splat [1], sending an empty message
through pppoe_sendmsg().
When VLAN_FLAG_REORDER_HDR flag is set, vlan_dev_hard_header()
does not push extra bytes for the VLAN header, because vlan is offloaded.
Unfortunately vlan_dev_hard_start_xmit() first reads veth->h_vlan_proto
before testing (vlan->flags & VLAN_FLAG_REORDER_HDR).
We need to swap the two conditions.
[1]
BUG: KMSAN: uninit-value in vlan_dev_hard_start_xmit+0x171/0x7f0 net/8021q/vlan_dev.c:111
vlan_dev_hard_start_xmit+0x171/0x7f0 net/8021q/vlan_dev.c:111
__netdev_start_xmit include/linux/netdevice.h:4883 [inline]
netdev_start_xmit include/linux/netdevice.h:4897 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x253/0xa20 net/core/dev.c:3596
__dev_queue_xmit+0x3c7f/0x5ac0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3053 [inline]
pppoe_sendmsg+0xa93/0xb80 drivers/net/ppp/pppoe.c:900
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0xa24/0xe40 net/socket.c:2501
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555
__sys_sendmmsg+0x411/0xa50 net/socket.c:2641
__do_sys_sendmmsg net/socket.c:2670 [inline]
__se_sys_sendmmsg net/socket.c:2667 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was created at:
slab_post_alloc_hook+0x12d/0xb60 mm/slab.h:774
slab_alloc_node mm/slub.c:3452 [inline]
kmem_cache_alloc_node+0x543/0xab0 mm/slub.c:3497
kmalloc_reserve+0x148/0x470 net/core/skbuff.c:520
__alloc_skb+0x3a7/0x850 net/core/skbuff.c:606
alloc_skb include/linux/skbuff.h:1277 [inline]
sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2583
pppoe_sendmsg+0x3af/0xb80 drivers/net/ppp/pppoe.c:867
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0xa24/0xe40 net/socket.c:2501
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555
__sys_sendmmsg+0x411/0xa50 net/socket.c:2641
__do_sys_sendmmsg net/socket.c:2670 [inline]
__se_sys_sendmmsg net/socket.c:2667 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
CPU: 0 PID: 29770 Comm: syz-executor.0 Not tainted 6.3.0-rc6-syzkaller-gc478e5b17829 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The commit 39d954200bf6 ("fprobe: Skip exit_handler if entry_handler returns
!0") introduced a hidden dependency of 'ret' local variable in the
fprobe_handler(), Smatch warns the `ret` can be accessed without
initialization.
kernel/trace/fprobe.c:59 fprobe_handler()
error: uninitialized symbol 'ret'.
kernel/trace/fprobe.c
49 fpr->entry_ip = ip;
50 if (fp->entry_data_size)
51 entry_data = fpr->data;
52 }
53
54 if (fp->entry_handler)
55 ret = fp->entry_handler(fp, ip, ftrace_get_regs(fregs), entry_data);
ret is only initialized if there is an ->entry_handler
56
57 /* If entry_handler returns !0, nmissed is not counted. */
58 if (rh) {
rh is only true if there is an ->exit_handler. Presumably if you have
and ->exit_handler that means you also have a ->entry_handler but Smatch
is not smart enough to figure it out.
--> 59 if (ret)
^^^
Warning here.
60 rethook_recycle(rh);
61 else
62 rethook_hook(rh, ftrace_get_regs(fregs), true);
63 }
64 out:
65 ftrace_test_recursion_unlock(bit);
66 }
Link: https://lore.kernel.org/all/168100731160.79534.374827110083836722.stgit@devnote2/
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/all/85429a5c-a4b9-499e-b6c0-cbd313291c49@kili.mountain
Fixes: 39d954200bf6 ("fprobe: Skip exit_handler if entry_handler returns !0")
Acked-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Turns out I missed a few patches due to use of old addresses by
senders. Add a mailmap entry with my old addresses.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: support dynamic interrupt allocation
Piotr Raczynski says:
This patchset reimplements MSIX interrupt allocation logic to allow dynamic
interrupt allocation after MSIX has been initially enabled. This allows
current and future features to allocate and free interrupts as needed and
will help to drastically decrease number of initially preallocated
interrupts (even down to the API hard limit of 1). Although this patchset
does not change behavior in terms of actual number of allocated interrupts
during probe, it will be subject to change.
First few patches prepares to introduce dynamic allocation by moving
interrupt allocation code to separate file and update allocation API used
in the driver to the currently preferred one.
Due to the current contract between ice and irdma driver which is directly
accessing msix entries allocated by ice driver, even after moving away from
older pci_enable_msix_range function, still keep msix_entries array for
irdma use.
Next patches refactors and removes redundant code from SRIOV related logic
as it also make it easier to move away from static allocation scheme.
Last patches actually enables dynamic allocation of MSIX interrupts. First,
introduce functions to allocate and free interrupts individually. This sets
ground for the rest of the changes even if that patch still allocates the
interrupts from the preallocated pool. Since this patch starts to keep
interrupt details in ice_q_vector structure we can get rid of functions
that calculates base vector number and register offset for the interrupt
as it is equal to the interrupt index. Only keep separate register offset
functions for the VF VSIs.
Next, replace homegrown interrupt tracker with much simpler xarray based
approach. As new API always allocate interrupts one by one, also track
interrupts in the same manner.
Lastly, extend the interrupt tracker to deal both with preallocated and
dynamically allocated vectors and use pci_msix_alloc_irq_at and
pci_msix_free_irq functions. Since not all architecture supports dynamic
allocation, check it before trying to allocate a new interrupt.
As previously mentioned, this patchset does not change number of initially
allocated interrupts during init phase but now it can and will likely be
changed.
Patch 1-3 -> move code around and use newer API
Patch 4-5 -> refactor and remove redundant SRIOV code
Patch 6 -> allocate every interrupt individually
Patch 7 -> replace homegrown interrupt tracker with xarray
Patch 8 -> allow dynamic interrupt allocation
---
v2:
Patch 4
- simplify ice_vsi_setup_vector_base and account for num_avail_sw_msix
Patch 8
- prevent q_vector leak in case vf ctrl VSI error
v1: https://lore.kernel.org/netdev/20230509170048.2235678-1-anthony.l.nguyen@intel.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In igb_hash_mc_addr() the expression:
"mc_addr[4] >> 8 - bit_shift", right shifting "mc_addr[4]"
shift by more than 7 bits always yields zero, so hash becomes not so different.
Add initialization with bit_shift = 1 and add a loop condition to ensure
bit_shift will be always in [1..8] range.
Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony nguyen says:
====================
Intel Wired LAN Driver Updates 2023-05-16
This series contains updates to ice and iavf drivers.
Ahmed adds setting of missed condition for statistics which caused
incorrect reporting of values for ice. For iavf, he removes a call to set
VLAN offloads during re-initialization which can cause incorrect values
to be set.
Dawid adds checks to ensure VF is ready to be reset before executing
commands that will require it to be reset on ice.
---
v2:
Patch 2
- Redo commit message
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Detect whether macsec secy is running on top of VLAN
which implies transmitting VLAN tag in clear text before
macsec SecTag. In this case configure hardware to insert
SecTag after VLAN tag.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to datasheet, the command opcode must be specified
into bits [14:12] of the Extended Port Control register (EPC).
Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Marco Migliore <m.migliore@tiesse.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
cas_saturn_firmware_init() allocates some memory using vmalloc(). This
memory is freed in the .remove() function but not it the error handling
path of the probe.
Add the missing vfree() to avoid a memory leak, should an error occur.
Fixes: fcaa40669cd7 ("cassini: use request_firmware")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In processing IPv6 segment routing header (SRH), several functions call
skb_dst_drop before ip6_route_input. However, ip6_route_input calls
skb_dst_drop within it, so there is no need to call skb_dst_drop in advance.
Signed-off-by: Yuya Tajima <yuya.tajimaa@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzkaller reported [0] memory leaks of sk and skb related to the TUN
device with no repro, but we can reproduce it easily with:
struct ifreq ifr = {}
int fd_tun, fd_tmp;
char buf[4] = {};
fd_tun = openat(AT_FDCWD, "/dev/net/tun", O_WRONLY, 0);
ifr.ifr_flags = IFF_TUN | IFF_NAPI | IFF_MULTI_QUEUE;
ioctl(fd_tun, TUNSETIFF, &ifr);
ifr.ifr_flags = IFF_DETACH_QUEUE;
ioctl(fd_tun, TUNSETQUEUE, &ifr);
fd_tmp = socket(AF_PACKET, SOCK_PACKET, 0);
ifr.ifr_flags = IFF_UP;
ioctl(fd_tmp, SIOCSIFFLAGS, &ifr);
write(fd_tun, buf, sizeof(buf));
close(fd_tun);
If we enable NAPI and multi-queue on a TUN device, we can put skb into
tfile->sk.sk_write_queue after the queue is detached. We should prevent
it by checking tfile->detached before queuing skb.
Note this must be done under tfile->sk.sk_write_queue.lock because write()
and ioctl(IFF_DETACH_QUEUE) can run concurrently. Otherwise, there would
be a small race window:
write() ioctl(IFF_DETACH_QUEUE)
`- tun_get_user `- __tun_detach
|- if (tfile->detached) |- tun_disable_queue
| `-> false | `- tfile->detached = tun
| `- tun_queue_purge
|- spin_lock_bh(&queue->lock)
`- __skb_queue_tail(queue, skb)
Another solution is to call tun_queue_purge() when closing and
reattaching the detached queue, but it could paper over another
problems. Also, we do the same kind of test for IFF_NAPI_FRAGS.
[0]:
unreferenced object 0xffff88801edbc800 (size 2048):
comm "syz-executor.1", pid 33269, jiffies 4295743834 (age 18.756s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace:
[<000000008c16ea3d>] __do_kmalloc_node mm/slab_common.c:965 [inline]
[<000000008c16ea3d>] __kmalloc+0x4a/0x130 mm/slab_common.c:979
[<000000003addde56>] kmalloc include/linux/slab.h:563 [inline]
[<000000003addde56>] sk_prot_alloc+0xef/0x1b0 net/core/sock.c:2035
[<000000003e20621f>] sk_alloc+0x36/0x2f0 net/core/sock.c:2088
[<0000000028e43843>] tun_chr_open+0x3d/0x190 drivers/net/tun.c:3438
[<000000001b0f1f28>] misc_open+0x1a6/0x1f0 drivers/char/misc.c:165
[<000000004376f706>] chrdev_open+0x111/0x300 fs/char_dev.c:414
[<00000000614d379f>] do_dentry_open+0x2f9/0x750 fs/open.c:920
[<000000008eb24774>] do_open fs/namei.c:3636 [inline]
[<000000008eb24774>] path_openat+0x143f/0x1a30 fs/namei.c:3791
[<00000000955077b5>] do_filp_open+0xce/0x1c0 fs/namei.c:3818
[<00000000b78973b0>] do_sys_openat2+0xf0/0x260 fs/open.c:1356
[<00000000057be699>] do_sys_open fs/open.c:1372 [inline]
[<00000000057be699>] __do_sys_openat fs/open.c:1388 [inline]
[<00000000057be699>] __se_sys_openat fs/open.c:1383 [inline]
[<00000000057be699>] __x64_sys_openat+0x83/0xf0 fs/open.c:1383
[<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80
[<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc
unreferenced object 0xffff88802f671700 (size 240):
comm "syz-executor.1", pid 33269, jiffies 4295743854 (age 18.736s)
hex dump (first 32 bytes):
68 c9 db 1e 80 88 ff ff 68 c9 db 1e 80 88 ff ff h.......h.......
00 c0 7b 2f 80 88 ff ff 00 c8 db 1e 80 88 ff ff ..{/............
backtrace:
[<00000000e9d9fdb6>] __alloc_skb+0x223/0x250 net/core/skbuff.c:644
[<000000002c3e4e0b>] alloc_skb include/linux/skbuff.h:1288 [inline]
[<000000002c3e4e0b>] alloc_skb_with_frags+0x6f/0x350 net/core/skbuff.c:6378
[<00000000825f98d7>] sock_alloc_send_pskb+0x3ac/0x3e0 net/core/sock.c:2729
[<00000000e9eb3df3>] tun_alloc_skb drivers/net/tun.c:1529 [inline]
[<00000000e9eb3df3>] tun_get_user+0x5e1/0x1f90 drivers/net/tun.c:1841
[<0000000053096912>] tun_chr_write_iter+0xac/0x120 drivers/net/tun.c:2035
[<00000000b9282ae0>] call_write_iter include/linux/fs.h:1868 [inline]
[<00000000b9282ae0>] new_sync_write fs/read_write.c:491 [inline]
[<00000000b9282ae0>] vfs_write+0x40f/0x530 fs/read_write.c:584
[<00000000524566e4>] ksys_write+0xa1/0x170 fs/read_write.c:637
[<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80
[<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fixes: cde8b15f1aab ("tuntap: add ioctl to attach or detach a file form tuntap device")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Merge branch 'tcp-io_uring-zc-opts'
Pavel Begunkov says:
====================
minor tcp io_uring zc optimisations
Patch 1 is a simple cleanup, patch 2 gives removes 2 atomics from the
io_uring zc TCP submission path, which yielded extra 0.5% for my
throughput CPU bound tests based on liburing/examples/send-zerocopy.c
====================
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
io_uring keeps a reference to ubuf_info during submission, so if
tcp_sendmsg_locked() sees msghdr::msg_ubuf in can be sure the buffer
will be kept alive and doesn't need to additionally pin it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move tcp_write_queue_tail() to SOCK_ZEROCOPY specific flag as zerocopy
setup for msghdr->ubuf_info doesn't need to peek into the last request.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jimmy Assarsson <extja@kvaser.com> says:
This patch series contains various bug fixes for the kvaser_pciefd
driver.
Link: https://lore.kernel.org/r/20230516134318.104279-1-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Disable interrupts in error path of probe function.
Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-7-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Under certain circumstances we send two EFLUSH commands, resulting in two
EFLUSH ack packets, while only expecting a single EFLUSH ack.
This can cause the driver Tx flush completion to get out of sync.
To avoid this problem, don't enable the "Transmit buffer flush done" (TFD)
interrupt and remove the code handling it.
Now we only send EFLUSH command after receiving status packet with
"Init detected" (IDET) bit set.
Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-6-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Empty the "Shared receive buffer" (SRB) in probe, to assure we start in a
known state, and don't process any irrelevant packets.
Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-5-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Make sure the interrupt handler is registered before enabling interrupts.
Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-4-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The listen-only bit was never cleared, causing the controller to
always use listen-only mode, if previously set.
Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-3-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Set can.state to CAN_STATE_STOPPED in kvaser_pciefd_stop().
Without this fix, wrong CAN state was repported after the interface was
brought down.
Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-2-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
clang warns about an unpacked structure inside of a packed one:
drivers/net/wireless/broadcom/b43/b43.h:654:4: error: field data within 'struct b43_iv' is less aligned than 'union (unnamed union at /home/arnd/arm-soc/drivers/net/wireless/broadcom/b43/b43.h:651:2)' and is usually due to 'struct b43_iv' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
The problem here is that the anonymous union has the default alignment
from its members, apparently because the original author mixed up the
placement of the __packed attribute by placing it next to the struct
member rather than the union definition. As the struct itself is
also marked as __packed, there is no need to mark its members, so just
move the annotation to the inner type instead.
As Michael noted, the same problem is present in b43legacy, so
change both at the same time.
Acked-by: Michael Büsch <m@bues.ch>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/oe-kbuild-all/202305160749.ay1HAoyP-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230516183442.536589-1-arnd@kernel.org
|
|
The Allwinner sunxi-mmc controller cannot handle word (16 bit)
transfers. So and sdio_{read,write}w fails with messages like the
following example using an RTL8822BS (but the same problems were also
observed with RTL8822CS and RTL8723DS chips):
rtw_8822bs mmc1:0001:1: Firmware version 27.2.0, H2C version 13
sunxi-mmc 4021000.mmc: unaligned scatterlist: os f80 length 2
sunxi-mmc 4021000.mmc: map DMA failed
rtw_8822bs mmc1:0001:1: sdio read16 failed (0x10230): -22
Use two consecutive single byte accesses for word operations instead. It
turns out that upon closer inspection this is also what the vendor
driver does, even though it does have support for sdio_{read,write}w. So
we can conclude that the rtw88 chips do support word access but only on
SDIO controllers that also support it. Since there's no way to detect if
the controller supports word access or not the rtw88 sdio driver
switches to the easiest approach: avoiding word access.
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Closes: https://lore.kernel.org/linux-wireless/527585e5-9cdd-66ed-c3af-6da162f4b720@lwfinger.net/
Reported-by: Rudi Heitbaum <rudi@heitbaum.com>
Link: https://github.com/LibreELEC/LibreELEC.tv/pull/7837#issue-1708469467
Fixes: 65371a3f14e7 ("wifi: rtw88: sdio: Add HCI implementation for SDIO based chipsets")
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230515195043.572375-1-martin.blumenstingl@googlemail.com
|
|
It's trivial for user to trigger "verifier log line truncated" warning,
as verifier has a fixed-sized buffer of 1024 bytes (as of now), and there are at
least two pieces of user-provided information that can be output through
this buffer, and both can be arbitrarily sized by user:
- BTF names;
- BTF.ext source code lines strings.
Verifier log buffer should be properly sized for typical verifier state
output. But it's sort-of expected that this buffer won't be long enough
in some circumstances. So let's drop the check. In any case code will
work correctly, at worst truncating a part of a single line output.
Reported-by: syzbot+8b2a08dfbd25fd933d75@syzkaller.appspotmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230516180409.3549088-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Magnus Karlsson says:
====================
Prepare the AF_XDP selftests test framework code for the upcoming
multi-buffer support in AF_XDP. This so that the multi-buffer patch
set does not become way too large. In that upcoming patch set, we are
only including the multi-buffer tests together with any framework
code that depends on the new options bit introduced in the AF_XDP
multi-buffer implementation itself.
Currently, the test framework is based on the premise that a packet
consists of a single fragment and thus occupies a single buffer and a
single descriptor. Multi-buffer breaks this assumption, as that is the
whole purpose of it. Now, a packet can consist of multiple buffers and
therefore consume multiple descriptors.
The patch set starts with some clean-ups and simplifications followed
by patches that make sure that the current code works even when a
packet occupies multiple buffers. The actual code for sending and
receiving multi-buffer packets will be included in the AF_XDP
multi-buffer patch set as it depends on a new bit being used in the
options field of the descriptor.
Patch set anatomy:
1: The XDP program was unnecessarily changed many times. Fixes this.
2: There is no reason to generate a full UDP/IPv4 packet as it is
never used. Simplify the code by just generating a valid Ethernet
frame.
3: Introduce a more complicated payload pattern that can detect
fragments out of bounds in a multi-buffer packet and other errors
found in single-fragment packets.
4: As a convenience, dump the content of the faulty packet at error.
5: To simplify the code, make the usage of the packet stream for Tx
and Rx more similar.
6: Store the offset of the packet in the buffer in the struct pkt
definition instead of the address in the umem itself and introduce
a simple buffer allocator. The address only made sense when all
packets consumed a single buffer. Now, we do not know beforehand
how many buffers a packet will consume, so we instead just allocate
a buffer from the allocator and specify the offset within that
buffer.
7: Test for huge pages only once instead of before each test that needs it.
8: Populate the fill ring based on how many frags are needed for each
packet.
9: Change the data generation code so it can generate data for
multi-buffer packets too.
10: Adjust the packet pacing algorithm so that it can cope with
multi-buffer packets. The pacing algorithm is present so that Tx
does not send too many packets/frames to Rx that it starts to drop
packets. That would ruin the tests.
v1 -> v2:
* Fixed spelling error in patch #6 [Simon]
* Fixed compilation error with llvm in patch #7 [Daniel]
Thanks: Magnus
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Modify the packet pacing algorithm so that it works with multi-buffer
packets. This algorithm makes sure we do not send too many buffers to
the receiving thread so that packets have to be dropped. The previous
algorithm made the assumption that each packet only consumes one
buffer, but that is not true anymore when multi-buffer support gets
added. Instead, we find out what the largest packet size is in the
packet stream and assume that each packet will consume this many
buffers. This is conservative and overly cautious as there might be
smaller packets in the stream that need fewer buffers per packet. But
it keeps the algorithm simple.
Also simplify it by removing the pthread conditional and just test if
there is enough space in the Rx thread before trying to send one more
batch. Also makes the tests run faster.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-11-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add the ability to generate data in the packets that are correct for
multi-buffer packets. The ethernet header should only go into the
first fragment followed by data and the others should only have
data. We also need to modify the pkt_dump function so that it knows
what fragment has an ethernet header so it can print this.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-10-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Populate the fill ring based on the number of frags a packet
needs. With multi-buffer support, a packet might require more than a
single fragment/buffer, so the function xsk_populate_fill_ring() needs
to consider how many buffers a packet will consume, and put that many
buffers on the fill ring for each packet it should receive. As we are
still not sending any multi-buffer packets, the function will only
produce one buffer per packet at the moment.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-9-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test for hugepages only once at the beginning of the execution of the
whole test suite, instead of before each test that needs huge
pages. These are the tests that use unaligned mode. As more unaligned
tests will be added, so the current system just does not scale.
With this change, there are now three possible outcomes of a test run:
fail, pass, or skip. To simplify the handling of this, the function
testapp_validate_traffic() now returns this value to the main loop. As
this function is used by nearly all tests, it meant a small change to
most of them.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-8-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Store the offset in struct pkt instead of the address. This is
important since address is only meaningful in the context of a packet
that is stored in a single umem buffer and thus a single Tx
descriptor. If the packet, in contrast need to be represented by
multiple buffers in the umem, storing the address makes no sense since
the packet will consist of multiple buffers in the umem at various
addresses. This change is in preparation for the upcoming
multi-buffer support in AF_XDP and the corresponding tests.
So instead of indicating the address, we instead indicate the offset
of the packet in the first buffer. The actual address of the buffer is
allocated from the umem with a new function called
umem_alloc_buffer(). This also means we can get rid of the
use_fill_for_addr flag as the addresses fed into the fill ring will
always be the offset from the pkt specification in the packet stream
plus the address of the allocated buffer from the umem. No special
casing needed.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-7-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Convert the current variable rx_pkt_nb to an iterator that can be used
for both Rx and Tx. This to simplify the code and making Tx more like
Rx that already has this feature.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-6-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Dump the content of the packet when a test finds that packets are
received out of order, the length is wrong, or some other packet
error. Use the already existing pkt_dump function for this and call it
when the above errors are detected. Get rid of the command line option
for dumping packets as it is not useful to print out thousands of
good packets followed by the faulty one you would like to see.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-5-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a varying payload pattern within the packet. Instead of having
just a packet number that is the same for all words in a packet, make
each word different in the packet. The upper 16-bits are set to the
packet number and the lower 16-bits are the sequence number of the
words in this packet. So the 3rd packet's 5th 32-bit word of data will
contain the number (2<<32) | 4 as they are numbered from 0.
This will make it easier to detect fragments that are out of order
when starting to test multi-buffer support.
The member payload in the packet is renamed pkt_nb to reflect that it
is now only a pkt_nb, not the real payload as seen above.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-4-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Implement support for generating pkts with variable length. Before
this patch, they were all 64 bytes, exception for some packets of zero
length and some that were too large. This feature will be used to test
multi-buffer support for which large packets are needed.
The packets are also made simpler, just a valid Ethernet header
followed by a sequence number. This so that it will become easier to
implement packet generation when each packet consists of multiple
fragments. There is also a maintenance burden associated with carrying
all this code for generating proper UDP/IP packets, especially since
they are not needed.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-3-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Do not change the XDP program for the Tx thread when not needed. It
was erroneously compared to the XDP program for the Rx thread, which
is always going to be different, which meant that the code made
unnecessary switches to the same program it had before. This did not
affect functionality, just performance.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-2-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Jiri Olsa says:
====================
hi,
I noticed several times in discussions that we should move test kfuncs
into kernel module, now perhaps even more pressing with all the kfunc
effort. This patchset moves all the test kfuncs into bpf_testmod.
I added bpf_testmod/bpf_testmod_kfunc.h header that is shared between
bpf_testmod kernel module and BPF programs.
v4 changes:
- s390 supports long calls [1] now, so it can call now kfuncs from module [Ilya]
- added acks [David]
- cleanups for ptr_to_u64 function [David]
- use relative path for bpf_testmod_kfunc.h include [Andrii]
- new libbpf fix (patch 1) for gen_loader
v3 changes:
- added acks [David]
- added bpf_testmod.ko make dependency for bpf test progs [David]
- better handling of __ksym and refcount_t in bpf_testmod_kfunc.h [David]
- removed 'extern' from kfuncs declarations [David]
- typo in header guard macro [David]
- use only stdout in un/load_bpf_testmod
v2 changes:
- add 74bc3a5acc82 into bpf-next/master CI, so the test would pass
https://github.com/kernel-patches/vmtest/pull/192
- remove extra externs [Artem]
- using un/load_bpf_testmod in other tests
- rebased
thanks,
jirka
[1] 1cf3bfc60f98 bpf: Support 64-bit pointers to kfuncs
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Moving kernel test kfuncs into bpf_testmod kernel module, and adding
necessary init calls and BTF IDs records.
We need to keep following structs in kernel:
struct prog_test_ref_kfunc
struct prog_test_member (embedded in prog_test_ref_kfunc)
The reason is because they need to be marked as rcu safe (check test
prog mark_ref_as_untrusted_or_null) and such objects are being required
to be defined only in kernel at the moment (see rcu_safe_kptr check
in kernel).
We need to keep also dtor functions for both objects in kernel:
bpf_kfunc_call_test_release
bpf_kfunc_call_memb_release
We also keep the copy of these struct in bpf_testmod_kfunc.h, because
other test functions use them. This is unfortunate, but this is just
temporary solution until we are able to these structs them to bpf_testmod
completely.
As suggested by David adding bpf_testmod.ko make dependency for
bpf programs, so they are rebuilt if we change the bpf_testmod.ko
module.
Also adding missing __bpf_kfunc to bpf_kfunc_call_test4 functions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230515133756.1658301-11-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There's no need to keep the extern in kfuncs declarations.
Suggested-by: David Vernet <void@manifault.com>
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-10-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently the test_verifier allows test to specify kfunc symbol
and search for it in the kernel BTF.
Adding the possibility to search for kfunc also in bpf_testmod
module when it's not found in kernel BTF.
To find bpf_testmod btf we need to get back SYS_ADMIN cap.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-9-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Loading bpf_testmod kernel module for verifier test. We will
move all the tests kfuncs into bpf_testmod in following change.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-8-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Now that we have un/load_bpf_testmod helpers in testing_helpers.h,
we can use it in other tests and save some lines.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-7-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Do not unload bpf_testmod in load_bpf_testmod, instead call
unload_bpf_testmod separatelly.
This way we will be able use un/load_bpf_testmod functions
in other tests that un/load bpf_testmod module.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We are about to use un/load_bpf_testmod functions in couple tests
and it's better to print output to stdout, so it's aligned with
tests ASSERT macros output, which use stdout as well.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Moving test_progs helpers to testing_helpers object so they can be
used from test_verifier in following changes.
Also adding missing ifndef header guard to testing_helpers.h header.
Using stderr instead of env.stderr because un/load_bpf_testmod helpers
will be used outside test_progs. Also at the point of calling them
in test_progs the std files are not hijacked yet and stderr is the
same as env.stderr.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Move all kfunc exports into separate bpf_testmod_kfunc.h header file
and include it in tests that need it.
We will move all test kfuncs into bpf_testmod in following change,
so it's convenient to have declarations in single place.
The bpf_testmod_kfunc.h is included by both bpf_testmod and bpf
programs that use test kfuncs.
As suggested by David, the bpf_testmod_kfunc.h includes vmlinux.h
and bpf/bpf_helpers.h for bpf programs build, so the declarations
have proper __ksym attribute and we can resolve all the structs.
Note in kfunc_call_test_subprog.c we can no longer use the sk_state
define from bpf_tcp_helpers.h (because it clashed with vmlinux.h)
and we need to address __sk_common.skc_state field directly.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
