| Age | Commit message (Collapse) | Author |
|---|
|
[BUG]
Syzbot reported a weird ASSERT() triggered inside prepare_to_merge().
assertion failed: root->reloc_root == reloc_root, in fs/btrfs/relocation.c:1919
------------[ cut here ]------------
kernel BUG at fs/btrfs/relocation.c:1919!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 9904 Comm: syz-executor.3 Not tainted
6.4.0-syzkaller-08881-g533925cb7604 #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 05/27/2023
RIP: 0010:prepare_to_merge+0xbb2/0xc40 fs/btrfs/relocation.c:1919
Code: fe e9 f5 (...)
RSP: 0018:ffffc9000325f760 EFLAGS: 00010246
RAX: 000000000000004f RBX: ffff888075644030 RCX: 1481ccc522da5800
RDX: ffffc90005c09000 RSI: 00000000000364ca RDI: 00000000000364cb
RBP: ffffc9000325f870 R08: ffffffff816f33ac R09: 1ffff9200064bea0
R10: dffffc0000000000 R11: fffff5200064bea1 R12: ffff888075644000
R13: ffff88803b166000 R14: ffff88803b166560 R15: ffff88803b166558
FS: 00007f4e305fd700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000056080679c000 CR3: 00000000193ad000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
relocate_block_group+0xa5d/0xcd0 fs/btrfs/relocation.c:3749
btrfs_relocate_block_group+0x7ab/0xd70 fs/btrfs/relocation.c:4087
btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3283
__btrfs_balance+0x1b06/0x2690 fs/btrfs/volumes.c:4018
btrfs_balance+0xbdb/0x1120 fs/btrfs/volumes.c:4402
btrfs_ioctl_balance+0x496/0x7c0 fs/btrfs/ioctl.c:3604
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0xf8/0x170 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f4e2f88c389
[CAUSE]
With extra debugging, the offending reloc_root is for quota tree (rootid 8).
Normally we should not use the reloc tree for quota root at all, as reloc
trees are only for subvolume trees.
But there is a race between quota enabling and relocation, this happens
after commit 85724171b302 ("btrfs: fix the btrfs_get_global_root return value").
Before that commit, for quota and free space tree, we exit immediately
if we cannot grab it from fs_info.
But now we would try to read it from disk, just as if they are fs trees,
this sets ROOT_SHAREABLE flags in such race:
Thread A | Thread B
---------------------------------+------------------------------
btrfs_quota_enable() |
| | btrfs_get_root_ref()
| | |- btrfs_get_global_root()
| | | Returned NULL
| | |- btrfs_lookup_fs_root()
| | | Returned NULL
|- btrfs_create_tree() | |
| Now quota root item is | |
| inserted | |- btrfs_read_tree_root()
| | | Got the newly inserted quota root
| | |- btrfs_init_fs_root()
| | | Set ROOT_SHAREABLE flag
[FIX]
Get back to the old behavior by returning PTR_ERR(-ENOENT) if the target
objectid is not a subvolume tree or data reloc tree.
Reported-and-tested-by: syzbot+ae97a827ae1c3336bbb4@syzkaller.appspotmail.com
Fixes: 85724171b302 ("btrfs: fix the btrfs_get_global_root return value")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When the call to btrfs_reloc_clone_csums in cow_file_range returns an
error, we jump to the out_unlock label with the extent_reserved variable
set to false. The cleanup at the label will then call
extent_clear_unlock_delalloc on the range from start to end. But we've
already added cur_alloc_size to start before the jump, so there might no
range be left from the newly incremented start to end. Move the check for
'start < end' so that it is reached by also for the !extent_reserved case.
CC: stable@vger.kernel.org # 6.1+
Fixes: a315e68f6e8b ("Btrfs: fix invalid attempt to free reserved space on failure to cow range")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
__extent_writepage could have started on more pages than the one it was
called for. This happens regularly for zoned file systems, and in theory
could happen for compressed I/O if the worker thread was executed very
quickly. For such pages extent_write_cache_pages waits for writeback
to complete before moving on to the next page, which is highly inefficient
as it blocks the flusher thread.
Port over the PageDirty check that was added to write_cache_pages in
commit 515f4a037fb ("mm: write_cache_pages optimise page cleaning") to
fix this.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
extent_write_cache_pages stops writing pages as soon as nr_to_write hits
zero. That is the right thing for opportunistic writeback, but incorrect
for data integrity writeback, which needs to ensure that no dirty pages
are left in the range. Thus only stop the writeback for WB_SYNC_NONE
if nr_to_write hits 0.
This is a port of write_cache_pages changes in commit 05fe478dd04e
("mm: write_cache_pages integrity fix").
Note that I've only trigger the problem with other changes to the btrfs
writeback code, but this condition seems worthwhile fixing anyway.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ updated comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The PCSpecialist Elimina Pro 16 M laptop model is a Zen laptop which
needs to use the MADT IRQ settings override and which does not have
an INT_SRC_OVR entry for IRQ 1 in its MADT.
So this model needs a DMI quirk to enable the MADT IRQ settings override
to fix its keyboard not working.
Fixes: a9c4a912b7dc ("ACPI: resource: Remove "Zen" specific match and quirks")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217394#c18
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Recently we've been having mysterious hangs while running generic/475 on
the CI system. This turned out to be something like this:
Task 1
dmsetup suspend --nolockfs
-> __dm_suspend
-> dm_wait_for_completion
-> dm_wait_for_bios_completion
-> Unable to complete because of IO's on a plug in Task 2
Task 2
wb_workfn
-> wb_writeback
-> blk_start_plug
-> writeback_sb_inodes
-> Infinite loop unable to make an allocation
Task 3
cache_block_group
->read_extent_buffer_pages
->Waiting for IO to complete that can't be submitted because Task 1
suspended the DM device
The problem here is that we need Task 2 to be scheduled completely for
the blk plug to flush. Normally this would happen, we normally wait for
the block group caching to finish (Task 3), and this schedule would
result in the block plug flushing.
However if there's enough free space available from the current caching
to satisfy the allocation we won't actually wait for the caching to
complete. This check however just checks that we have enough space, not
that we can make the allocation. In this particular case we were trying
to allocate 9MiB, and we had 10MiB of free space, but we didn't have
9MiB of contiguous space to allocate, and thus the allocation failed and
we looped.
We specifically don't cycle through the FFE loop until we stop finding
cached block groups because we don't want to allocate new block groups
just because we're caching, so we short circuit the normal loop once we
hit LOOP_CACHING_WAIT and we found a caching block group.
This is normally fine, except in this particular case where the caching
thread can't make progress because the DM device has been suspended.
Fix this by not only waiting for free space to >= the amount of space we
want to allocate, but also that we make some progress in caching from
the time we start waiting. This will keep us from busy looping when the
caching is taking a while but still theoretically has enough space for
us to allocate from, and fixes this particular case by forcing us to
actually sleep and wait for forward progress, which will flush the plug.
With this fix we're no longer hanging with generic/475.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Unify on making the calls from display code. Need to add an if ladder in
gen8_de_irq_postinstall() for now, but the function looks like it could
be overall be better split by platform. Something for the future.
The display version check for mtp seems a bit suspect, but this matches
current code.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fe51744aec9e2f465caf0d699b8a15591859f89e.1691509966.git.jani.nikula@intel.com
|
|
Add a dedicated de postinstall function.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f4a8570881e9be28a2406134b2898b8680f9e765.1691509966.git.jani.nikula@intel.com
|
|
Add a dedicated de postinstall function.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cb6bb860fb7596d6b37c3e1e4c7657064d2d747a.1691509966.git.jani.nikula@intel.com
|
|
Continue splitting display from the rest.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/45c247c9f5104f3e25bd8913644402a11ec3afaf.1691509966.git.jani.nikula@intel.com
|
|
WA_22016122933 was recently applied to all MeteorLake engines, which is
simultaneously too broad (should only apply to Media engines) and too
specific (should apply to all platforms that use the same media engine
as MeteorLake). Correct this in cases where coherency settings are
modified.
There were also two additional places where the workaround was applied
unconditionally. The change was confirmed as necessary for all
platforms, so the workaround label was removed.
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Acked-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801153242.2445478-4-jonathan.cavitt@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230807121957.598420-4-andi.shyti@linux.intel.com
|
|
Refactor i915_coherent_map_type to be GT-centric rather than
device-centric. Each GT may require different coherency
handling due to hardware workarounds.
Since the function now takes a GT instead of the i915, the function is
renamed and moved to the gt folder.
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Acked-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801153242.2445478-3-jonathan.cavitt@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230807121957.598420-3-andi.shyti@linux.intel.com
|
|
The object pin created for shmem_create_from_object is just a
single use mapping with the sole purpose of reading the contents
of the whole object in bulk. And the whole source object is also
even a throw-away. Ergo, the additional logic required by
i915_coherent_map_type can be safely dropped and simplified.
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801153242.2445478-2-jonathan.cavitt@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230807121957.598420-2-andi.shyti@linux.intel.com
|
|
Fix a -Wmissing-prototypes warning and add the gather_data_sampling()
stub macro call for real.
Fixes: 0fddfe338210 ("driver core: cpu: Unify redundant silly stubs")
Closes: https://lore.kernel.org/oe-kbuild-all/202308101956.oRj1ls7s-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/202308101956.oRj1ls7s-lkp@intel.com
|
|
The assertion added to verify the difference in bits set of the
addresses of srso_untrain_ret_alias() and srso_safe_ret_alias() would fail
to link in LLVM's ld.lld linker with the following error:
ld.lld: error: ./arch/x86/kernel/vmlinux.lds:210: at least one side of
the expression must be absolute
ld.lld: error: ./arch/x86/kernel/vmlinux.lds:211: at least one side of
the expression must be absolute
Use ABSOLUTE to evaluate the expression referring to at least one of the
symbols so that LLD can evaluate the linker script.
Also, add linker version info to the comment about XOR being unsupported
in either ld.bfd or ld.lld until somewhat recently.
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Closes: https://lore.kernel.org/llvm/CA+G9fYsdUeNu-gwbs0+T6XHi4hYYk=Y9725-wFhZ7gJMspLDRA@mail.gmail.com/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Daniel Kolesa <daniel@octaforge.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Sven Volkinsfeld <thyrc@gmx.net>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://github.com/ClangBuiltLinux/linux/issues/1907
Link: https://lore.kernel.org/r/20230809-gds-v1-1-eaac90b0cbcc@google.com
|
|
Add a note about the dependency of the User->User mitigation on the
previous Spectre v2 IBPB selection.
Make the layout moar pretty.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230809102700.29449-4-bp@alien8.de
|
|
Make them all a weak function, aliasing to a single function which
issues the "Not affected" string.
No functional changes.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20230809102700.29449-3-bp@alien8.de
|
|
interrupt targets
SA8775 and newer target have added support for an increased number of
interrupt targets. To implement this change, the intr_target field, which
is used to configure the interrupt target in the interrupt configuration
register is increased from 3 bits to 4 bits.
In accordance to these updates, a new intr_target_width member is
introduced in msm_pingroup structure. This member stores the value of
width of intr_target field in the interrupt configuration register. This
value is used to dynamically calculate and generate mask for setting the
intr_target field. By default, this mask is set to 3 bit wide, to ensure
backward compatibility with the older targets.
Fixes: 4b6b18559927 ("pinctrl: qcom: add the tlmm driver sa8775p platforms")
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Ninad Naik <quic_ninanaik@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230809100634.3961-1-quic_ninanaik@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Most of the index.rst files in Documentation/ refer to other rst files
without their file extension in the name. Do that here too.
No functional changes.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230809102700.29449-2-bp@alien8.de
|
|
All I2C Dell Oasis models using CS35L41 have been changed to use SPI.
In addition, System 10280cc5 is no longer required.
Fixes: de90f5165b1c ("ALSA: hda/realtek: Add support for DELL Oasis 13/14/16 laptops")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230809142957.675933-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
These HP G11 laptops use Realtek HDA codec combined with
2xCS35L41 Amplifiers using SPI or I2C with External Boost.
Laptop 103c8c26 has been removed as this has been replaced
by this new series of laptops.
Fixes: 3e10f6ca76c4 ("ALSA: hda/realtek: Add quirk for HP EliteBook G10 laptops")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230809142957.675933-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Debug log similar to the device id based identification of no display.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804084600.1005818-2-jani.nikula@intel.com
|
|
The current display probe is unable to differentiate between IVB Q and
IVB D GT2 server, as they both have the same device id, but different
subvendor and subdevice. This leads to the latter being misidentified as
the former, and should just end up not having a display. However, the no
display case returns a NULL as the display device info, and promptly
oopses.
As the IVB Q case is rare, and we're anyway moving towards GMD ID,
handle the identification requiring subvendor and subdevice as a special
case first, instead of unnecessarily growing the intel_display_ids[]
array with subvendor and subdevice.
[ 5.425298] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 5.426059] #PF: supervisor read access in kernel mode
[ 5.426810] #PF: error_code(0x0000) - not-present page
[ 5.427570] PGD 0 P4D 0
[ 5.428285] Oops: 0000 [#1] PREEMPT SMP PTI
[ 5.429035] CPU: 0 PID: 137 Comm: (udev-worker) Not tainted 6.4.0-1-amd64 #1 Debian 6.4.4-1
[ 5.429759] Hardware name: HP HP Z220 SFF Workstation/HP Z220 SFF Workstation, BIOS 4.19-218-gb184e6e0a1 02/02/2023
[ 5.430485] RIP: 0010:intel_device_info_driver_create+0xf1/0x120 [i915]
[ 5.431338] Code: 48 8b 97 80 1b 00 00 89 8f c0 1b 00 00 48 89 b7 b0 1b 00 00 48 89 97 b8 1b 00 00 0f b7 fd e8 76 e8 14 00 48 89 83 50 1b 00 00 <48> 8b 08 48 89 8b c4 1b 00 00 48 8b 48 08 48 89 8b cc 1b 00 00 8b
[ 5.432920] RSP: 0018:ffffb8254044fb98 EFLAGS: 00010206
[ 5.433707] RAX: 0000000000000000 RBX: ffff923076e80000 RCX: 0000000000000000
[ 5.434494] RDX: 0000000000000260 RSI: 0000000100001000 RDI: 000000000000016a
[ 5.435277] RBP: 000000000000016a R08: ffffb8254044fb00 R09: 0000000000000000
[ 5.436055] R10: ffff922d02761de8 R11: 00657361656c6572 R12: ffffffffc0e5d140
[ 5.436867] R13: ffff922d00b720d0 R14: 0000000076e80000 R15: ffff923078c0cae8
[ 5.437646] FS: 00007febd19a18c0(0000) GS:ffff92307c000000(0000) knlGS:0000000000000000
[ 5.438434] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5.439218] CR2: 0000000000000000 CR3: 000000010256e002 CR4: 00000000001706f0
[ 5.440009] Call Trace:
[ 5.440824] <TASK>
[ 5.441611] ? __die+0x23/0x70
[ 5.442394] ? page_fault_oops+0x17d/0x4c0
[ 5.443173] ? exc_page_fault+0x7f/0x180
[ 5.443949] ? asm_exc_page_fault+0x26/0x30
[ 5.444756] ? intel_device_info_driver_create+0xf1/0x120 [i915]
[ 5.445652] ? intel_device_info_driver_create+0xea/0x120 [i915]
[ 5.446545] i915_driver_probe+0x7f/0xb60 [i915]
[ 5.447431] ? drm_privacy_screen_get+0x15c/0x1a0 [drm]
[ 5.448240] local_pci_probe+0x45/0xa0
[ 5.449013] pci_device_probe+0xc7/0x240
[ 5.449748] really_probe+0x19e/0x3e0
[ 5.450464] ? __pfx___driver_attach+0x10/0x10
[ 5.451172] __driver_probe_device+0x78/0x160
[ 5.451870] driver_probe_device+0x1f/0x90
[ 5.452601] __driver_attach+0xd2/0x1c0
[ 5.453293] bus_for_each_dev+0x88/0xd0
[ 5.453989] bus_add_driver+0x116/0x220
[ 5.454672] driver_register+0x59/0x100
[ 5.455336] i915_init+0x25/0xc0 [i915]
[ 5.456104] ? __pfx_i915_init+0x10/0x10 [i915]
[ 5.456882] do_one_initcall+0x5d/0x240
[ 5.457511] do_init_module+0x60/0x250
[ 5.458126] __do_sys_finit_module+0xac/0x120
[ 5.458721] do_syscall_64+0x60/0xc0
[ 5.459314] ? syscall_exit_to_user_mode+0x1b/0x40
[ 5.459897] ? do_syscall_64+0x6c/0xc0
[ 5.460510] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 5.461082] RIP: 0033:0x7febd20b0eb9
[ 5.461648] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2f 1f 0d 00 f7 d8 64 89 01 48
[ 5.462905] RSP: 002b:00007fffabb1ba78 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 5.463554] RAX: ffffffffffffffda RBX: 0000561e6304f410 RCX: 00007febd20b0eb9
[ 5.464201] RDX: 0000000000000000 RSI: 00007febd2244f0d RDI: 0000000000000015
[ 5.464869] RBP: 00007febd2244f0d R08: 0000000000000000 R09: 000000000000000a
[ 5.465512] R10: 0000000000000015 R11: 0000000000000246 R12: 0000000000020000
[ 5.466124] R13: 0000000000000000 R14: 0000561e63032b60 R15: 000000000000000a
[ 5.466700] </TASK>
[ 5.467271] Modules linked in: i915(+) drm_buddy video crc32_pclmul sr_mod hid_generic wmi crc32c_intel i2c_algo_bit sd_mod cdrom drm_display_helper cec usbhid rc_core ghash_clmulni_intel hid sha512_ssse3 ttm sha512_generic xhci_pci ehci_pci xhci_hcd ehci_hcd nvme ahci drm_kms_helper nvme_core libahci t10_pi libata psmouse aesni_intel scsi_mod crypto_simd i2c_i801 scsi_common crc64_rocksoft_generic cryptd i2c_smbus drm lpc_ich crc64_rocksoft crc_t10dif e1000e usbcore crct10dif_generic usb_common crct10dif_pclmul crc64 crct10dif_common button
[ 5.469750] CR2: 0000000000000000
[ 5.470364] ---[ end trace 0000000000000000 ]---
[ 5.470971] RIP: 0010:intel_device_info_driver_create+0xf1/0x120 [i915]
[ 5.471699] Code: 48 8b 97 80 1b 00 00 89 8f c0 1b 00 00 48 89 b7 b0 1b 00 00 48 89 97 b8 1b 00 00 0f b7 fd e8 76 e8 14 00 48 89 83 50 1b 00 00 <48> 8b 08 48 89 8b c4 1b 00 00 48 8b 48 08 48 89 8b cc 1b 00 00 8b
[ 5.473034] RSP: 0018:ffffb8254044fb98 EFLAGS: 00010206
[ 5.473698] RAX: 0000000000000000 RBX: ffff923076e80000 RCX: 0000000000000000
[ 5.474371] RDX: 0000000000000260 RSI: 0000000100001000 RDI: 000000000000016a
[ 5.475045] RBP: 000000000000016a R08: ffffb8254044fb00 R09: 0000000000000000
[ 5.475725] R10: ffff922d02761de8 R11: 00657361656c6572 R12: ffffffffc0e5d140
[ 5.476405] R13: ffff922d00b720d0 R14: 0000000076e80000 R15: ffff923078c0cae8
[ 5.477124] FS: 00007febd19a18c0(0000) GS:ffff92307c000000(0000) knlGS:0000000000000000
[ 5.477811] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5.478499] CR2: 0000000000000000 CR3: 000000010256e002 CR4: 00000000001706f0
Fixes: 69d439818fe5 ("drm/i915/display: Make display responsible for probing its own IP")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8991
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804084600.1005818-1-jani.nikula@intel.com
|
|
Commit cd3a8a596214 ("drm/ttm: remove ttm_bo_(un)lock_delayed_workqueue")
removed the implementations but not the declarations.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230809135839.13216-1-yuehaibing@huawei.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
drm_exec_prepare_obj() and drm_exec_prepare_array() both reserve
dma-fence slots and hence a dma_resv_list without ever freeing it.
Make sure to call drm_gem_private_object_fini() for each GEM object
passed to drm_exec_prepare_obj()/drm_exec_prepare_array() throughout the
test to fix this up.
While at it, remove some trailing empty lines.
Fixes: 9710631cc8f3 ("drm: add drm_exec selftests v4")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230809225034.8803-1-dakr@redhat.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
On the SoC host controller, the pixel clock can be:
* standard: data is launched on the rising edge
* inverted: data is launched on the falling edge
Some panels may need the inverted option to be used so let's support
this DRM flag.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609144843.851327-1-miquel.raynal@bootlin.com
|
|
Panfrost IRQ handler may stuck for a long time, for example this happens
when there is a bad HDMI connection and HDMI handler takes a long time to
finish processing, holding Panfrost. Make Panfrost's job timeout handler
to sync IRQ before checking fence signal status in order to prevent
spurious job timeouts due to a slow IRQ processing.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> # MediaTek MT8192 and MT8195 Chromebooks
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807000444.14926-1-dmitry.osipenko@collabora.com
|
|
Not really a common use case, but let's make sure that we don't
accidentially break that somehow.
CC: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731123625.3766-2-christian.koenig@amd.com
|
|
GCC forbids to jump to labels in loop conditions and a new clang
check stumbled over this.
So instead using a local label inside the loop condition use an
unique label outside of it.
Fixes: 09593216bff1 ("drm: execution context for GEM buffers v7")
Link: https://gcc.gnu.org/onlinedocs/gcc/Statement-Exprs.html
Link: https://github.com/ClangBuiltLinux/linux/issues/1890
Link: https://github.com/llvm/llvm-project/commit/20219106060208f0c2f5d096eb3aed7b712f5067
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
CC: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731123625.3766-1-christian.koenig@amd.com
|
|
The dma-buf backend is supposed to provide its own vm_ops, but some
implementation just have nothing special to do and leave vm_ops
untouched, probably expecting this field to be zero initialized (this
is the case with the system_heap implementation for instance).
Let's reset vma->vm_ops to NULL to keep things working with these
implementations.
Fixes: 26d3ac3cb04d ("drm/shmem-helpers: Redirect mmap for imported dma-buf")
Cc: <stable@vger.kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Roman Stratiienko <r.stratiienko@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230724112610.60974-1-boris.brezillon@collabora.com
|
|
Ditch it, it has been replace it by the GC transaction API and it has no
clients anymore.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Set on the NFT_SET_ELEM_DEAD_BIT flag on this element, instead of
performing element removal which might race with an ongoing transaction.
Enable gc when dynamic flag is set on since dynset deletion requires
garbage collection after this patch.
Fixes: d0a8d877da97 ("netfilter: nft_dynset: support for element deletion")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use the GC transaction API to replace the old and buggy gc API and the
busy mark approach.
No set elements are removed from async garbage collection anymore,
instead the _DEAD bit is set on so the set element is not visible from
lookup path anymore. Async GC enqueues transaction work that might be
aborted and retried later.
rbtree and pipapo set backends does not set on the _DEAD bit from the
sync GC path since this runs in control plane path where mutex is held.
In this case, set elements are deactivated, removed and then released
via RCU callback, sync GC never fails.
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Fixes: 8d8540c4f5e0 ("netfilter: nft_set_rbtree: add timeout support")
Fixes: 9d0982927e79 ("netfilter: nft_hash: add support for timeouts")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The set types rhashtable and rbtree use a GC worker to reclaim memory.
From system work queue, in periodic intervals, a scan of the table is
done.
The major caveat here is that the nft transaction mutex is not held.
This causes a race between control plane and GC when they attempt to
delete the same element.
We cannot grab the netlink mutex from the work queue, because the
control plane has to wait for the GC work queue in case the set is to be
removed, so we get following deadlock:
cpu 1 cpu2
GC work transaction comes in , lock nft mutex
`acquire nft mutex // BLOCKS
transaction asks to remove the set
set destruction calls cancel_work_sync()
cancel_work_sync will now block forever, because it is waiting for the
mutex the caller already owns.
This patch adds a new API that deals with garbage collection in two
steps:
1) Lockless GC of expired elements sets on the NFT_SET_ELEM_DEAD_BIT
so they are not visible via lookup. Annotate current GC sequence in
the GC transaction. Enqueue GC transaction work as soon as it is
full. If ruleset is updated, then GC transaction is aborted and
retried later.
2) GC work grabs the mutex. If GC sequence has changed then this GC
transaction lost race with control plane, abort it as it contains
stale references to objects and let GC try again later. If the
ruleset is intact, then this GC transaction deactivates and removes
the elements and it uses call_rcu() to destroy elements.
Note that no elements are removed from GC lockless path, the _DEAD bit
is set and pointers are collected. GC catchall does not remove the
elements anymore too. There is a new set->dead flag that is set on to
abort the GC transaction to deal with set->ops->destroy() path which
removes the remaining elements in the set from commit_release, where no
mutex is held.
To deal with GC when mutex is held, which allows safe deactivate and
removal, add sync GC API which releases the set element object via
call_rcu(). This is used by rbtree and pipapo backends which also
perform garbage collection from control plane path.
Since element removal from sets can happen from control plane and
element garbage collection/timeout, it is necessary to keep the set
structure alive until all elements have been deactivated and destroyed.
We cannot do a cancel_work_sync or flush_work in nft_set_destroy because
its called with the transaction mutex held, but the aforementioned async
work queue might be blocked on the very mutex that nft_set_destroy()
callchain is sitting on.
This gives us the choice of ABBA deadlock or UaF.
To avoid both, add set->refs refcount_t member. The GC API can then
increment the set refcount and release it once the elements have been
free'd.
Set backends are adapted to use the GC transaction API in a follow up
patch entitled:
("netfilter: nf_tables: use gc transaction API in set backends")
This is joint work with Florian Westphal.
Fixes: cfed7e1b1f8e ("netfilter: nf_tables: add set garbage collection helpers")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pull smb server fixes from Steve French:
"Two ksmbd server fixes, both also for stable:
- improve buffer validation when multiple EAs returned
- missing check for command payload size"
* tag '6.5-rc5-ksmbd-server' of git://git.samba.org/ksmbd:
ksmbd: fix wrong next length validation of ea buffer in smb2_set_ea()
ksmbd: validate command request size
|
|
Add a 200ms delay after sending a ctrl report to Quadro,
Octo, D5 Next and Aquaero to give them enough time to
process the request and save the data to memory. Otherwise,
under heavier userspace loads where multiple sysfs entries
are usually set in quick succession, a new ctrl report could
be requested from the device while it's still processing the
previous one and fail with -EPIPE. The delay is only applied
if two ctrl report operations are near each other in time.
Reported by a user on Github [1] and tested by both of us.
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/82
Fixes: 752b927951ea ("hwmon: (aquacomputer_d5next) Add support for Aquacomputer Octo")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20230807172004.456968-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Revert a patch that unconditionally resolved addresses to inlines in
callchains, something that was done before when DWARF mode was asked
for, but could as well be done when just frame pointers (the default)
was selected.
This enriches the callchains with inlines but the way to resolve it
is gross right now, relying on addr2line, and even if we come up with
an efficient way of processing all the associated DWARF info for a
big file as vmlinux is, this has to be something people opt-in, as it
will still result in overheads, so revert it until we get this done
in a saner way.
- Update the x86 msr-index.h header with the kernel original, no change
in tooling output, just addresses a tools/perf build warning.
- Resolve a regression where special "tool events", such as
"duration_time" were being presented for all CPUs, when it only
makes sense to show it for the workload, that is, just once.
* tag 'perf-tools-fixes-for-v6.5-3-2023-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf stat: Don't display zero tool counts
tools arch x86: Sync the msr-index.h copy with the kernel sources
Revert "perf report: Append inlines to non-DWARF callchains"
|
|
Commit 16d7fd3cfa72 ("zonefs: use iomap for synchronous direct writes")
changes zonefs code from a self-built zone append BIO to using iomap for
synchronous direct writes. This change relies on iomap submit BIO
callback to change the write BIO built by iomap to a zone append BIO.
However, this change overlooked the fact that a write BIO may be very
large as it is split when issued. The change from a regular write to a
zone append operation for the built BIO can result in a block layer
warning as zone append BIO are not allowed to be split.
WARNING: CPU: 18 PID: 202210 at block/bio.c:1644 bio_split+0x288/0x350
Call Trace:
? __warn+0xc9/0x2b0
? bio_split+0x288/0x350
? report_bug+0x2e6/0x390
? handle_bug+0x41/0x80
? exc_invalid_op+0x13/0x40
? asm_exc_invalid_op+0x16/0x20
? bio_split+0x288/0x350
bio_split_rw+0x4bc/0x810
? __pfx_bio_split_rw+0x10/0x10
? lockdep_unlock+0xf2/0x250
__bio_split_to_limits+0x1d8/0x900
blk_mq_submit_bio+0x1cf/0x18a0
? __pfx_iov_iter_extract_pages+0x10/0x10
? __pfx_blk_mq_submit_bio+0x10/0x10
? find_held_lock+0x2d/0x110
? lock_release+0x362/0x620
? mark_held_locks+0x9e/0xe0
__submit_bio+0x1ea/0x290
? __pfx___submit_bio+0x10/0x10
? seqcount_lockdep_reader_access.constprop.0+0x82/0x90
submit_bio_noacct_nocheck+0x675/0xa20
? __pfx_bio_iov_iter_get_pages+0x10/0x10
? __pfx_submit_bio_noacct_nocheck+0x10/0x10
iomap_dio_bio_iter+0x624/0x1280
__iomap_dio_rw+0xa22/0x18a0
? lock_is_held_type+0xe3/0x140
? __pfx___iomap_dio_rw+0x10/0x10
? lock_release+0x362/0x620
? zonefs_file_write_iter+0x74c/0xc80 [zonefs]
? down_write+0x13d/0x1e0
iomap_dio_rw+0xe/0x40
zonefs_file_write_iter+0x5ea/0xc80 [zonefs]
do_iter_readv_writev+0x18b/0x2c0
? __pfx_do_iter_readv_writev+0x10/0x10
? inode_security+0x54/0xf0
do_iter_write+0x13b/0x7c0
? lock_is_held_type+0xe3/0x140
vfs_writev+0x185/0x550
? __pfx_vfs_writev+0x10/0x10
? __handle_mm_fault+0x9bd/0x1c90
? find_held_lock+0x2d/0x110
? lock_release+0x362/0x620
? find_held_lock+0x2d/0x110
? lock_release+0x362/0x620
? __up_read+0x1ea/0x720
? do_pwritev+0x136/0x1f0
do_pwritev+0x136/0x1f0
? __pfx_do_pwritev+0x10/0x10
? syscall_enter_from_user_mode+0x22/0x90
? lockdep_hardirqs_on+0x7d/0x100
do_syscall_64+0x58/0x80
This error depends on the hardware used, specifically on the max zone
append bytes and max_[hw_]sectors limits. Tests using AMD Epyc machines
that have low limits did not reveal this issue while runs on Intel Xeon
machines with larger limits trigger it.
Manually splitting the zone append BIO using bio_split_rw() can solve
this issue but also requires issuing the fragment BIOs synchronously
with submit_bio_wait(), to avoid potential reordering of the zone append
BIO fragments, which would lead to data corruption. That is, this
solution is not better than using regular write BIOs which are subject
to serialization using zone write locking at the IO scheduler level.
Given this, fix the issue by removing zone append support and using
regular write BIOs for synchronous direct writes. This allows preseving
the use of iomap and having identical synchronous and asynchronous
sequential file write path. Zone append support will be reintroduced
later through io_uring commands to ensure that the needed special
handling is done correctly.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 16d7fd3cfa72 ("zonefs: use iomap for synchronous direct writes")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Xu Kuohai says:
====================
bug fixes and a new test case for sockmap.
v3:
fix bpf ci failure
v2: https://lore.kernel.org/bpf/20230803064838.108784-1-xukuohai@huaweicloud.com
add a test case
v1:
https://lore.kernel.org/bpf/20230728105649.3978774-1-xukuohai@huaweicloud.com
https://lore.kernel.org/bpf/20230728105717.3978849-1-xukuohai@huaweicloud.com
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add a test case to check whether sockmap redirection works correctly
when data length returned by stream_parser is less than skb->len.
In addition, this test checks whether strp_done is called correctly.
The reason is that we returns skb->len - 1 from the stream_parser, so
the last byte in the skb will be held by strp->skb_head. Therefore,
if strp_done is not called to free strp->skb_head, we'll get a memleak
warning.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20230804073740.194770-5-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
BPF CI has reported the following failure:
Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir
Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir
./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1506: ingress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1514: ingress: recv() err, errno=11
vsock_unix_redir_connectible:FAIL:1514
./test_progs:vsock_unix_redir_connectible:1518: ingress: vsock socket map failed, a != b
vsock_unix_redir_connectible:FAIL:1518
./test_progs:vsock_unix_redir_connectible:1525: ingress: want pass count 1, have 0
It’s because the recv(... MSG_DONTWAIT) syscall in the test case is
called before the queued work sk_psock_backlog() in the kernel finishes
executing. So the data to be read is still queued in psock->ingress_skb
and cannot be read by the user program. Therefore, the non-blocking
recv() reads nothing and reports an EAGAIN error.
So replace recv(... MSG_DONTWAIT) with xrecv_nonblock(), which calls
select() to wait for data to be readable or timeout before calls recv().
Fixes: d61bd8c1fd02 ("selftests/bpf: add a test case for vsock sockmap")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20230804073740.194770-4-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
strp_done is only called when psock->progs.stream_parser is not NULL,
but stream_parser was set to NULL by sk_psock_stop_strp(), called
by sk_psock_drop() earlier. So, strp_done can never be called.
Introduce SK_PSOCK_RX_ENABLED to mark whether there is strp on psock.
Change the condition for calling strp_done from judging whether
stream_parser is set to judging whether this flag is set. This flag is
only set once when strp_init() succeeds, and will never be cleared later.
Fixes: c0d95d3380ee ("bpf, sockmap: Re-evaluate proto ops when psock is removed from sockmap")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230804073740.194770-3-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
sock_map_del_link() operates on both SOCKMAP and SOCKHASH, although
both types have member named "progs", the offset of "progs" member in
these two types is different, so "progs" should be accessed with the
real map type.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230804073740.194770-2-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Fix a refcount underflow problem reported by syzbot that can happen
when a system is running out of memory. If xp_alloc_tx_descs() fails,
and it can only fail due to not having enough memory, then the error
path is triggered. In this error path, the refcount of the pool is
decremented as it has incremented before. However, the reference to
the pool in the socket was not nulled. This means that when the socket
is closed later, the socket teardown logic will think that there is a
pool attached to the socket and try to decrease the refcount again,
leading to a refcount underflow.
I chose this fix as it involved adding just a single line. Another
option would have been to move xp_get_pool() and the assignment of
xs->pool to after the if-statement and using xs_umem->pool instead of
xs->pool in the whole if-statement resulting in somewhat simpler code,
but this would have led to much more churn in the code base perhaps
making it harder to backport.
Fixes: ba3beec2ec1d ("xsk: Fix possible crash when multiple sockets are created")
Reported-by: syzbot+8ada0057e69293a05fd4@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230809142843.13944-1-magnus.karlsson@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
The interrupt handler for HPD is useful only if a display is actually
supposed to be hotpluggable, as that manages the machinery to perform
cable (un)plug detection, debouncing and setup for re-training.
Since eDP panels are not supposed to be hotpluggable we can avoid
using the HPD interrupts altogether and rely on HPD polling only
for the suspend/resume case, saving us some spinlocking action and
the overhead of interrupts firing at every suspend/resume cycle,
achieving a faster (even if just slightly) display resume.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230725073234.55892-12-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
In order to support usecases in which the panel regulator can be
switched on and off to save power, and usecases in which the panel
regulator is off at boot, add a .wait_hpd_asserted() callback for
the AUX bus: this will make sure to wait until the panel is fully
ready after power-on before trying to communicate with it.
Also, parse the eDP display capabilities in that callback, so that
we can also avoid using the .get_edid() callback from this bridge.
Since at this point the hpd machinery is performed in the new hpd
callback and the detection and edid reading are done outside of
this driver, assign the DRM_BRIDGE_OP_{DETECT, EDID, HPD} ops and
register the bridge unconditionally at probe time only if we are
probing full DisplayPort and not eDP while, for the latter, we
register the bridge in the .done_probing() callback and only if
the panel was found and triggered HPD.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230725073234.55892-11-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
For the eDP case we can support using aux-bus on MediaTek DP: this
gives us the possibility to declare our panel as generic "panel-edp"
which will automatically configure the timings and available modes
via the EDID that we read from it.
To do this, move the panel parsing at the end of the probe function
so that the hardware is initialized beforehand and also initialize
the DPTX AUX block and power both on as, when we populate the
aux-bus, the panel driver will trigger an EDID read to perform
panel detection.
Last but not least, since now the AUX transfers can happen in the
separated aux-bus, it was necessary to add an exclusion for the
cable_plugged_in check in `mtk_dp_aux_transfer()` and the easiest
way to do this is to simply ignore checking that when the bridge
type is eDP.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230725073234.55892-10-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
When the tdm lane mask is computed, the driver currently fills the 1st lane
before moving on to the next. If the stream has less channels than the
lanes can accommodate, slots will be disabled on the last lanes.
Unfortunately, the HW distribute channels in a different way. It distribute
channels in pair on each lanes before moving on the next slots.
This difference leads to problems if a device has an interface with more
than 1 lane and with more than 2 slots per lane.
For example: a playback interface with 2 lanes and 4 slots each (total 8
slots - zero based numbering)
- Playing a 8ch stream:
- All slots activated by the driver
- channel #2 will be played on lane #1 - slot #0 following HW placement
- Playing a 4ch stream:
- Lane #1 disabled by the driver
- channel #2 will be played on lane #0 - slot #2
This behaviour is obviously not desirable.
Change the way slots are activated on the TDM lanes to follow what the HW
does and make sure each channel always get mapped to the same slot/lane.
Fixes: 1a11d88f499c ("ASoC: meson: add tdm formatter base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20230809171931.1244502-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In preparation for adding support for eDP, move the PHY registration
code to a new mtk_dp_register_phy() function for better readability.
This commit brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230725073234.55892-9-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
If a controller (usually, eDP!) does not support audio, or audio is not
enabled because the endpoint has no audio support, it's useless to lock
a mutex only to unlock it right after because there's no .plugged_cb().
Check if the audio is supported and enabled before locking the mutex in
mtk_dp_update_plugged_status(): if not, we simply return immediately.
While at it, since the update_plugged_status_lock mutex would not be
used if the controller doesn't support audio at all, initialize it
only if `audio_supported` is true.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230725073234.55892-8-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
