summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-12-03arm64: tegra: Add temperature sensor on P2888Thierry Reding
The P2888 processor module contains a TI TMP451 temperature sensor with two channels. These are used to measure the temperatures at different locations on the module. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-12-03arm64: tegra: Add gpio-keys on Jetson XavierThierry Reding
The power and force recovery buttons found on Jetson Xavier are hooked up to two Tegra GPIOs. The power button can also function as a wake-up source. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-12-03arm64: tegra: Add AON GPIO controller on Tegra194Thierry Reding
The AON GPIO controller is in an always-on power partition and typically provides pins for functions that need to always work, such as the power key for example. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-12-03arm64: tegra: p2888: Enable on-die RTCThierry Reding
The on-die RTC isn't hooked up to a backup battery, so it isn't useful to track time across reboots, but as long as power remains enabled, it keeps track of time accurately and can be used to wake the system from sleep, for example. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-12-03arm64: tegra: Add RTC support on Tegra194Thierry Reding
The RTC on Tegra194 is very similar to the RTC on earlier generations. One notable exception is that the source clock is now the 32 kHz clock instead of a dedicated RTC clock and the RTC alarm is a wake event and can be used to wake the system from sleep. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-12-03arm64: tegra: Enable PMC wake events on Tegra194Thierry Reding
Wake events are a feature that allows the interrupt and GPIO controllers to be powered off as part of system sleep. The PMC which is always on is monitoring these wake events and can power up subsequent controllers as necessary to process them. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-12-03arm64: tegra: p3310: Enable on-die RTCThierry Reding
The on-die RTC isn't hooked up to a backup battery, so it isn't useful to track time across reboots, but as long as power remains enabled, it keeps track of time accurately and can be used to wake the system from sleep, for example. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-12-03arm64: tegra: Add RTC support on Tegra186Thierry Reding
The RTC on Tegra186 is very similar to the RTC on earlier generations. One notable exception is that the source clock is now the 32 kHz clock instead of a dedicated RTC clock and the RTC alarm is a wake event and can be used to wake the system from sleep. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-12-03arm64: tegra: Enable PMC wake events on Tegra186Thierry Reding
Wake events are a feature that allows the interrupt and GPIO controllers to be powered off as part of system sleep. The PMC which is always on is monitoring these wake events and can power up subsequent controllers as necessary to process them. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-12-03arm64: tegra: Fix power key interrupt type on Jetson TX2Thierry Reding
In order for the correct interrupt type to be configured, the event action for the power key needs to be "asserted". Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-12-03arm64: tegra: p2972: Enable the CPU, GPU and AUX thermal zonesThierry Reding
Enable these thermal zones to be able to monitor their temperatures and control the fan to cool down the system if necessary. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-12-03arm64: tegra: Add thermal zones on Tegra194Thierry Reding
The NVIDIA Tegra194 SoC defines six thermal zones. Define all of them in device tree. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-12-03arm64: tegra: Enable HDMI on P2972-0000Thierry Reding
Add the 5V HDMI regulator and hook up the VDD_1V0 and VDD_1V8HS supplies from the PMIC to the display block. Also enable the display hub which is responsible for instantiating the display controllers. Finally, enable the third SOR that drives the TMDS signals to the HDMI connector. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-12-03arm64: tegra: Add VIC support on Tegra194Thierry Reding
Tegra194 has a version of VIC that is very similar to that on Tegra186. Add the device tree node for it that is enabled by default. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-12-03arm64: tegra: Add display support on Tegra194Thierry Reding
Tegra194 contains a display architecture very similar to that found on the Tegra186. One notable exception is that DSI is no longer a supported output. Instead there are four display controllers and four SORs (with a DPAUX associated to each of them) that can drive HDMI or DP. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-12-03ARM: dts: aspeed: Add Facebook Backpack-CMM BMCTao Ren
Add initial version of device tree file for Facebook Backpack CMM (Chasis Management Module) ast2500 BMC. Signed-off-by: Tao Ren <taoren@fb.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-12-03ARM: dts: Add Facebook BMC flash layoutTao Ren
This is the layout used by Facebook BMC systems. It describes the fixed flash layout of a 32MB mtd device. Signed-off-by: Tao Ren <taoren@fb.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-12-03ARM: dts: aspeed: wspoon: Enable iio-hwmon batteryMatt Spinler
The BMC can read the RTC battery voltage via ADC channel 12. Signed-off-by: Matt Spinler <spinler@linux.vnet.ibm.com> Reviewed-by: Lei YU <mine260309@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-12-03ARM: dts: aspeed: romulus: Enable iio-hwmon-batteryLei YU
Add iio-hwmon-battery using adc channel 12 and enable adc to make adc running. This channel is used to read RTC battery voltage. Note with Romulus hardware design, it requires GPIOR3 to be pulled high to read the voltage, otherwise the reading is 0. When GPIOR3 is high, it consumes battery and impacts the battery life. So it is left for user space to toggle the GPIO when trying to read the voltage. Signed-off-by: Lei YU <mine260309@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-12-03ARM: dts: aspeed: Enable VHUB on RomulusJoel Stanley
The Romulus USB bus is connected to the Power9's PCIe USB controller. Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-12-03ARM: dts: aspeed-palmetto: Add LPC control nodeJoel Stanley
This adds the required LPC node with phandles to the reserved memory region and the mtd device. Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-12-03ARM: dts: aspeed: Palmetto system can use coprocessor for FSIBenjamin Herrenschmidt
This allows userspace to switch away from bitbanging to use kernel FSI with the coprocessor. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-12-03ARM: dts: aspeed: Romulus system can use coprocessor for FSIBenjamin Herrenschmidt
This replaces the FSI compatible with the ColdFire FSI compatible. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-12-02ARM: dts: pxa: clean up USB controller nodesDaniel Mack
PXA25xx SoCs don't have a USB controller, so drop the node from the common pxa2xx.dtsi base file. Both pxa27x and pxa3xx have a dedicated node already anyway. While at it, unify the names for the nodes across all pxa platforms. Signed-off-by: Daniel Mack <daniel@zonque.org> Reported-by: Sergey Yanovich <ynvich@gmail.com> Link: https://patchwork.kernel.org/patch/8375421/ Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2018-12-02ARM: dts: pxa3xx: clean up pxa3xx clock controller node nameDaniel Mack
The clock controller node does not need a unit slave designator as it does not have a reg property. Also, remove the underscore from the name. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2018-12-02ARM: dts: pxa3xx: order timer and gcu nodes under /pxabusDaniel Mack
These are devices on the PXA bus, so make the device tree structure reflect that. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2018-12-02ARM: dts: pxa2xx: fix hwuart memory rangeDaniel Mack
The memory range for the hwuart is at 0x41600000, not 0x41100000. This also solves a conflict with the MMC controller node. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2018-12-02ARM: dts: pxa3xx: drop #address-cells and #size-cells from pinctrl nodeDaniel Mack
The pinctrl node does not have any children, so the #address-cells and #size-cells properties are not needed. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2018-12-02ARM: dts: pxa2xx: drop #address-cells and #size-cells from /cpusDaniel Mack
PXA is single-core only, so this node will not have enumerable children. Drop the #address-cells and #size-cells properties to squelch a dtc warning. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2018-12-02ARM: dts: pxa3xx: add gcu nodeDaniel Mack
Add a device node for hardware graphic acceleration. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2018-12-01ARM: dts: s5pv210: Add s5p-jpeg codec node.Paweł Chmiel
Add node for s5p-jpeg codec, which is present in S5PV210 SoC. Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-11-30Merge tag 'hisi-arm64-dt-for-4.21' of git://github.com/hisilicon/linux-hisi ↵Olof Johansson
into next/dt ARM64: DT: Hisilicon SoCs DT updates for 4.21 * Hi3660 SoC and related boards: - Standardize LED labels and triggers for the hikey960 board - Add the missing cooling-cells property for the cpu nodes - Add all cpus into the cooling maps * Hi3670 SoC and related boards: - Add clock nodes and update the uart clock - Add Pinctrl, GPIO and uart nodes - Enable uart and add GPIO line names for the hikey970 board * Hi3798 SoC and related boards: - Standardize LED labels and triggers for the poplar board * Hi6220 SoC and related boards: - Standardize LED labels and triggers for the hikey board - Add all cpus into the cooling maps * tag 'hisi-arm64-dt-for-4.21' of git://github.com/hisilicon/linux-hisi: ARM64: dts: hisilicon: Add all CPUs in cooling maps arm64: dts: hi3660: Add missing cooling device properties for CPUs arm64: dts: hisilicon: poplar: Standardize LED labels and triggers arm64: dts: hisilicon: hikey960: Standardize LED labels and triggers arm64: dts: hisilicon: hikey: Standardize LED labels and triggers arm64: dts: hisilicon: hikey970: Add GPIO line names arm64: dts: hisilicon: hikey970: Enable on-board UARTs arm64: dts: hisilicon: hi3670: Add UART nodes arm64: dts: hisilicon: hi3670: Add GPIO controller support arm64: dts: hisilicon: Add Pinctrl support for HiKey970 board arm64: dts: hisilicon: Source SoC clock for UART6 arm64: dts: hisilicon: Add clock nodes for Hi3670 SoC Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30ARM: dts: aspeed: add missing memory unit-addressRob Herring
The base aspeed-g5.dtsi already defines a '/memory@80000000' node, so '/memory' in the board files create a duplicate node. We're probably getting lucky that the bootloader fixes up the memory node that the kernel ends up using. Add the unit-address so it's merged with the base node. Found with DT json-schema checks. Cc: Joel Stanley <joel@jms.id.au> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-aspeed@lists.ozlabs.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30ARM: dts: realview-pbx: Fix duplicate regulator nodesRob Herring
There's a bug in dtc in checking for duplicate node names when there's another section (e.g. "/ { };"). In this case, skeleton.dtsi provides another section. Upon removal of skeleton.dtsi, the dtb fails to build due to a duplicate node 'fixedregulator@0'. As both nodes were pretty much the same 3.3V fixed regulator, it hasn't really mattered. Fix this by renaming the nodes to something unique. In the process, drop the unit-address which shouldn't be present wtihout reg property. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30Merge tag 'amlogic-dt64' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt arm64: Amlogic DT updates for v4.21 Some highlights: - new boards: Phicomm N1 (S905D), Libretech S805-AC - fixes for pinmux pad bias, GPIO line names - AXG: enable SCPI, add secure monitor * tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (26 commits) arm64: dts: meson-gx: Add Internal Clock Measurer node arm64: dts: amlogic: Add all CPUs in cooling maps arm64: dts: meson: add libretech aml-s805x-ac board dt-bindings: arm: amlogic: add libretech aml-s805x-ac bindings dt-bindings: arm: amlogic: Add Phicomm N1 dt-bindings: Add vendor prefix for PHICOMM Co., Ltd. arm64: dts: meson-gxl: add support for phicomm n1 arm64: dts: meson: consistently disable pin bias arm64: dts: meson: disable pad bias for mmc pinmuxes arm64: dts: meson: remove extra subnode in mmc clk_gate pinmux arm64: dts: meson: s400: add bcm bluetooth device arm64: dts: meson: p230: disable advertisement EEE for GbE. arm64: dts: meson-axg: enable SCPI Documentation: bindings: Add missing Amlogic SCPI sensor bindings arm64: dts: meson-axg: correct sram shared mem unit-address arm64: dts: meson-axg: fix mailbox address arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply arm64: dts: meson-axg: add secure monitor arm64: dts: meson-axg: s400: add cts-rts to the bluetooth uart arm64: dts: meson-gxl-khadas-vim: fix GPIO lines names ... Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30Merge tag 'amlogic-dt' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Amlogic 32-bit DT updates for v4.21 - support more timers on meson8 - add the stdout-path property on several boards * tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson: add the clock inputs for the Meson timer ARM: dts: meson: add the TIMER B/C/D interrupts ARM: dts: meson: consistently disable pin bias ARM: dts: meson8b: mxq: add the /chosen/stdout-path property ARM: dts: meson8: minix-neo-x8: add the /chosen/stdout-path property ARM: dts: meson6: atv1200: add the /chosen/stdout-path property dt-bindings: timer: meson6_timer: document the clock inputs dt-bindings: timer: meson6_timer: document all interrupts Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30Merge tag 'omap-for-v4.21/dt-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Device tree changes for omaps for v4.21 merge window These changes mostly configure pinctrl for am437x-gp-evm. There is also non-critical fix for a comment for Clang, and we enable earlycon for am3517-evm. * tag 'omap-for-v4.21/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am437x-gp-evm: Add sleep state for beeper pins ARM: dts: am437x-gp-evm: Add pinmux for gpio0 wake ARM: dts: am437x-gp-evm: Add uart0 pinctrl default and sleep states ARM: dts: am437x-gp-evm: Add pinctrl for debugss pins ARM: dts: am437x-gp-evm: Add pinctrl for unused_pins ARM: dts: am437x-gp-evm: Add state for ddr3 vtt toggle pin ARM: dts: am3517-evm: Enable earlycon stdout path ARM: dts: omap3-gta04: Fix comment block Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30Merge tag 'vexpress-drm-arm-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt Versatile Express DTS update for DRM: This updates the Versatile Express family DTS files to contain the correct and detailed information required for the PL11x DRM driver to work properly. * tag 'vexpress-drm-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: dts: Modernize the Vexpress PL111 integration Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30ARM: dts: mmp2: Add SSP controllersLubomir Rintel
Despite Marvel keeps their base addresses secret there's a good chance they're actually correct. SSP1 and SSP3 bases were taken from OLPC 1.75: OpenFirmware and kernel respectively. SSP2 and SSP4 addresses are from James Cameron who actually has a copy of the data sheet. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30ARM: dts: mmp2: add USB OTG host controllerLubomir Rintel
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30ARM: dts: mmp2: add OTG PHYLubomir Rintel
The USB OTG PHY chip. To be used by the OTG controller. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30ARM: dts: mmp2: add more TWSI controllersLubomir Rintel
I've gotten the base addresses, clocks and interrupts from an rusty and old out-of-tree driver. I haven't actually checked against the datasheet, since that one is reserved for the Marvell inner circle. Tested with an accelerometer on TWSI6 on an OLPC XO 1.75 machine. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30ARM: dts: mmp2: fix TWSI2Lubomir Rintel
Marvell keeps their MMP2 datasheet secret, but there are good clues that TWSI2 is not on 0xd4025000 on that platform, not does it use IRQ 58. In fact, the IRQ 58 on MMP2 seems to be a signal processor: arch/arm/mach-mmp/irqs.h:#define IRQ_MMP2_MSP 58 I'm taking a somewhat educated guess that is probably a copy & paste error from PXA168 or PXA910 and that the real controller in fact hides at address 0xd4031000 and uses an interrupt line multiplexed via IRQ 17. I'm also copying some properties from TWSI1 that were missing or incorrect. Tested on a OLPC XO 1.75 machine, where the RTC is on TWSI2. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30ARM: dts: mmp2: add MMC controllersLubomir Rintel
There's apparently four of them on a MMP2. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30ARM: dts: mmp2: add clock to the timerLubomir Rintel
The timer needs the timer clock to be enabled, otherwise it stops ticking. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30ARM: dts: mmp2: give gpio node a nameLubomir Rintel
This will be useful for boards that actually use GPIO pins. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30ARM: dts: mmp2: fix the gpio interrupt cell numberLubomir Rintel
gpio-pxa uses two cell to encode the interrupt source: the pin number and the trigger type. Adjust the device node accordingly. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30dt-bindings: mrvl,mmp-timer: add clockLubomir Rintel
The timer needs the timer clock to be enabled, otherwise it stops ticking. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30Merge tag 'socfpga_dts_updates_for_v5.0' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt SoCFPGA DTS updates for v5.0 - Use SPDX license identifier for all SoCFPGA DTS files. - Remove dma-mask property as it has been deprecated. - Use tabs in DTS files. - Use the specific "altr,stratix10-rst-mgr" property for the Stratix10 reset manager. * tag 'socfpga_dts_updates_for_v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: stratix10: use "altr,stratix10-rst-mgr" binding ARM: dts: socfpga: use tabs for indentation arm: dts: socfpga: remove dma-mask property arm: dts: socfpga*.dts*: use SPDX-License-Identifier Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30Merge tag 'renesas-arm64-dt-for-v4.21' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Renesas ARM64 Based SoC DT Updates for v4.21 * H3 (r8a7795) SoC: - Remove unneeded sound #address/size-cells * M3-W (r8a7796) SoC: - Describe CMT (Compare Match Timer) devices in DT - Describe I2C-DVFS device node in DT * M3-N (r8a77965) SoC: - Describe CAN, CANFD and LVDS in DT * R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs: - Describe CPU topology, capacity and cooling maps in DT - Add SSIU support to R-Car audio * R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs: - Extend register range of HSUSB device to match documentation * R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based Salvator-X, Salvator-XS and ULCB boards: - Switch eMMC bus to 1V8 * R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based Salvator-X and Salvator-XS boards: - Describe USB3.0 xHCI host and prerepheral devices as companions * R-Car E3 (r8a77990) SoC: - Add thermal support - Add support for interupt controller for external devices (INTC-EX) - Describe all SCIF devices and SYS-DMA for I2C and MSIOF devices * R-Car E3 (r8a77990) based Ebisu board: - Enable SDHI, CAN, CANFD, audio and USB3.0 - Describe serial console pins * R-Car E3 (r8a77990) based Ebisu and R-Car D3 (r8a77995) based Draak board: - Enable USB2.0 peripheral device * R-Car M3-N (r8a77965), E3 (r8a77990) and V3H (r8a77980) SoCs: - Connect EtherAVB to IPMMU * R-Car V3M (r8a77970) and V3H (r8a77980) SoCs: - Describe TMU (timer unit), PWM timer controller and MSIOF devides in DT - Add thermal support * RZ/G2M (r8a774a1) SoC: - Use clock and power index macros - Describe VIN, CSI-2 and CAN devices in DT * tag 'renesas-arm64-dt-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (40 commits) arm64: dts: renesas: Add all CPUs in cooling maps arm64: dts: renesas: r8a77990: add thermal device support arm64: dts: renesas: r8a77990: Enable I2C DMA arm64: dts: renesas: r8a7796: Add CMT device nodes arm64: dts: renesas: r8a7796: add SSIU support for sound arm64: dts: renesas: r8a77990: Add I2C-DVFS device node arm64: dts: renesas: r8a77990: ebisu: Add and enable CAN,FD device nodes arm64: dts: renesas: r8a77965: Add CAN and CANFD controller nodes arm64: dts: renesas: r8a77990: ebisu: Add and enable PCIe device node arm64: dts: renesas: Add CPU capacity-dmips-mhz arm64: dts: renesas: Add CPU topology on R-Car Gen3 SoCs arm64: dts: renesas: r8a774a1: Replace clock magic numbers arm64: dts: renesas: r8a774a1: Replace power magic numbers arm64: dts: renesas: r8a7795: add SSIU support for sound arm64: dts: renesas: r8a77990: Fix VIN endpoint numbering arm64: dts: renesas: ebisu: Add and enable SDHI device nodes arm64: dts: renesas: ebisu: Add serial console pins arm64: dts: renesas: Switch eMMC bus to 1V8 on Salvator-X and ULCB arm64: dts: renesas: r8a77990: Add all HSCIF nodes arm64: dts: renesas: r8a779{7|8}0: add TMU support ... Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit (git 2.34.1) at 2025-09-28 19:09:08 +0000